#
# Copyright (C) 2009-2015 Mika Ilmaranta <ilmis@nullnet.fi>
#
# License: GPLv2
#

#
# Debug level: 0 .. 8 are normal, 9 gives lots of stuff
#
#debug=10
#debug=9
#debug=8

#
# Defaults for the connection entries
# These are set in the code. You may override any values here.
#
#defaults {
#  name=defaults
#  checkip=127.0.0.1
#  eventscript=
#  notifyscript=/usr/libexec/foolsm/default_script
#  max_packet_loss=15
#  max_successive_pkts_lost=7
#  min_packet_loss=5
#  min_successive_pkts_rcvd=10
#  interval_ms=1000
#  timeout_ms=1000
#  warn_email=root
#  check_arp=0
#  sourceip=
# if using ping probes for monitoring only then defaults should
# not define a default device for packets to autodiscover their path
# to destination
#  device=eth0
# use system default ttl
#  ttl=0
# assume initial up state at foolsm startup
# (1 = up, 0 = down, 2 = unknown (default))
#  status=1
# how many packets have to go through before a connection is declared up
# (0 = disabled)
#  startup_acceleration=0
# send first 10 packets in a burst (0 = disabled) with interval 200ms
#  startup_burst_pkts=10
#  startup_burst_interval=200
#}

#
# Some example connections are found in foolsm.conf.sample
#

-include /etc/foolsm/local*.conf