#!/usr/bin/env perl  ## no critic qw(ProhibitExcessMainComplexity)  # SYSTEM SPECIAL 4: allow complex code outside subroutines, must be on line 1
# [[[ PRE-HEADER ]]]
# suppress 'WEXRP00: Found multiple rperl executables' due to blib/ & pre-existing installation(s),
# also 'WARNING WCOCODE00, COMPILER, FIND DEPENDENCIES: Failed to eval-use package' due to RPerl/Test/*/*Bad*.pm & RPerl/Test/*/*bad*.pl
BEGIN { $ENV{RPERL_WARNINGS} = 0; }
# [[[ HEADER ]]]
use strict;
use warnings;
use RPerl::AfterSubclass;
our $VERSION = 0.021_000;
# [[[ CRITICS ]]]
## no critic qw(ProhibitUselessNoCritic ProhibitMagicNumbers RequireCheckedSyscalls)  # USER DEFAULT 1: allow numeric values & print operator
## no critic qw(RequireBriefOpen)  # USER DEFAULT 5: allow open() in perltidy-expanded code
## no critic qw(RequireInterpolationOfMetachars)  # USER DEFAULT 2: allow single-quoted control characters & sigils
## no critic qw(ProhibitDeepNests)  # SYSTEM SPECIAL 7: allow deeply-nested code
# [[[ INCLUDES ]]]
#use FooPerl
use RPerl::Parser;
use RPerl::Generator;
use RPerl::Compiler;
use Test::More;
use Test::Exception;
use File::Find qw(find);
use English;  # $EVAL_ERROR not defined after moving RPerl::* into lives_and() tests in BEGIN block below
use Cwd;
use File::Spec;
# [[[ CONSTANTS ]]]
use constant PATH_TESTS => my string $TYPED_PATH_TESTS = $RPerl::INCLUDE_PATH . '/RPerl/Test';
use constant PATH_TESTS_MYCLASS => my string $TYPED_PATH_TESTS_MYCLASS = $RPerl::INCLUDE_PATH . '/MyClass_Good.pm';
# [[[ OPERATIONS ]]]
our $verbose_newline = q{};
if ( $ENV{RPERL_VERBOSE} or $RPerl::VERBOSE ) {
    $verbose_newline = "\n";
}
BEGIN {
    if ( $ENV{RPERL_VERBOSE} or $RPerl::VERBOSE ) {
        Test::More::diag("[[[ Beginning Parser Pre-Test Loading, RPerl Compilation System ]]]");
    }
    # DEV NOTE: can't do use_ok() or require_ok() because it will place them before all other BEGIN blocks,
    # which means we wil have 4 tests passing before we call 'plan tests',
    # which means we will fail to have 'plan tests' first OR done_testing() last, which causes a TAP failure;
    # must be included w/ regular 'use' operators above
#    lives_and( sub { use_ok('RPerl::AfterSubclass'); },            q{use_ok('RPerl::AfterSubclass') lives} );
#    lives_and( sub { use_ok('RPerl::Parser'); }, q{use_ok('RPerl::Parser') lives} );
#    lives_and( sub { use_ok('RPerl::Generator'); }, q{use_ok('RPerl::Generator') lives} );
#    lives_and( sub { use_ok('RPerl::Compiler'); }, q{use_ok('RPerl::Compiler') lives} );
}
# DEV NOTE: must specify number of tests in EITHER 'plan tests' or done_testing() below, not both
#my integer $number_of_tests_run = 4;  # initialize to 4 for use_ok() calls in BEGIN block above
my $test_files = {};    # string_hashref
# NEED UPDATE: use 'no_chdir => 1' like 13_generate.t
# save current directory for file checks, because File::Find changes directory;
# use File::Spec for MS Windows support, etc.
my $current_working_directory = getcwd;
(my $volume, my $directories, my $dummy_file) = File::Spec->splitpath( $current_working_directory, 1 );  # no_file = 1
sub find_tests {
    ( my string $file_full_path_arg ) = @ARG;
     
    # accept optional argument with pre-defined file path if provided, else fall back to File::Find
    my string $file_full_path;
    if (defined $file_full_path_arg) {
        $file_full_path = $file_full_path_arg;
    }
    else {
        $file_full_path = $File::Find::name;
    }
#    RPerl::diag('in 12_parse.t, have $file_full_path = ' . $file_full_path . "\n");
=DISABLE_REPLACED_BY_nochdir
    if (defined $ARGV[0]) {
        # restore saved path, because File::Find changes directories while searching for files
        my $file_full_path = File::Spec->catpath( $volume, $directories, $file );
#        RPerl::diag('in 12_parse.t, have $file_full_path = ' . $file_full_path . "\n");
        $file = $file_full_path;
    }
=cut
#    if ( $file_full_path !~ m/.*Header\/program_00_bad_00.*[.]p[lm]$/xms ) { # TEMP DEBUGGING, ONLY FIND CERTAIN FILES
#    if ( $file_full_path !~ m/.*Operator12CompareEqualNotEqual\/\w+[.]p[lm]$/xms ) { # TEMP DEBUGGING, ONLY FIND CERTAIN DIRECTORY
    if ( $file_full_path !~ m/.p[lm]$/xms ) {  # FIND ALL TEST FILES
        return;
    }
    if ( ( $file_full_path =~ m/Good/ms ) or ( $file_full_path =~ m/good/ms ) ) {
        $test_files->{$file_full_path} = undef;
        # check for existence of PARSE preprocessor directive, skip file if parsing is explicitly disabled, <<< PARSE: OFF >>>
        open my filehandleref $FILE_HANDLE, '<', $file_full_path
            or croak 'ERROR, Cannot open file ' . $file_full_path . ' for reading,' . $OS_ERROR . ', croaking';
        while (<$FILE_HANDLE>) {
            if (m/^\#\s*\<\<\<\s*PARSE\s*\:\s*OFF\s*\>\>\>/xms) {
                delete $test_files->{$file_full_path};
                last;
            }
        }
        close $FILE_HANDLE
            or croak 'ERROR, Cannot close file ' . $file_full_path . ' after reading,' . $OS_ERROR . ', croaking';
    }
    elsif ( ( $file_full_path =~ m/Bad/ms ) or ( $file_full_path =~ m/bad/ms ) ) {
        # check for existence of PARSE & PARSE_ERROR preprocessor directives, compile list of expected parse errors, <<< PARSE_ERROR: 'FOO' >>>
        open my filehandleref $FILE_HANDLE, '<', $file_full_path
            or croak 'ERROR, Cannot open file ' . $file_full_path . ' for reading,' . $OS_ERROR . ', croaking';
        while (<$FILE_HANDLE>) {
            if (m/^\#\s*\<\<\<\s*PARSE\s*\:\s*OFF\s*\>\>\>/xms) {
                delete $test_files->{$file_full_path};
                last;
            }
            if (m/^\#\s*\<\<\<\s*PARSE_ERROR\s*\:\s*['"](.*)['"]\s*\>\>\>/xms) {
                push @{ $test_files->{$file_full_path}->{errors} }, $1;
            }
        }
        close $FILE_HANDLE
            or croak 'ERROR, Cannot close file ' . $file_full_path . ' after reading,' . $OS_ERROR . ', croaking';
    }
    else {  # file named neither Good nor Bad
        # check for existence of PARSE preprocessor directive, do NOT skip file if parsing is explicitly enabled, <<< PARSE: ON >>>
        open my filehandleref $FILE_HANDLE, '<', $file_full_path
            or croak 'ERROR, Cannot open file ' . $file_full_path . ' for reading,' . $OS_ERROR . ', croaking';
        while (<$FILE_HANDLE>) {
            if (m/^\#\s*\<\<\<\s*PARSE\s*\:\s*ON\s*\>\>\>/xms) {
                $test_files->{$file_full_path} = undef;
                last;
            }
        }
        close $FILE_HANDLE
            or croak 'ERROR, Cannot close file ' . $file_full_path . ' after reading,' . $OS_ERROR . ', croaking';
    }
}
find(
    {
        no_chdir => 1,  # if not set, causes incorrect paths when $ARGV[0] is defined
        wanted => \&find_tests
    },
    (defined $ARGV[0]) ? $ARGV[0] : PATH_TESTS()  # accept optional command-line argument
);
if (not defined $ARGV[0]) {
    # locate _MyClass.pm w/out unnecessary additional searching
    find_tests(PATH_TESTS_MYCLASS());
}
# trim unnecessary (and possibly problematic) absolute paths from input file names
# must be done outside find() to properly utilize getcwd()
foreach my string $test_file_key (sort keys %{$test_files}) {
    my string $test_file_key_trimmed = RPerl::Compiler::post_processor__absolute_path_delete($test_file_key);
    if ($test_file_key_trimmed ne $test_file_key) {
        $test_files->{$test_file_key_trimmed} = $test_files->{$test_file_key};
        delete $test_files->{$test_file_key};
    }
}
my integer $number_of_test_files = scalar keys %{$test_files};
#RPerl::diag( 'in 12_parse.t, have $test_files = ' . "\n" . Dumper($test_files) . "\n" );
#RPerl::diag( 'in 12_parse.t, have sort keys %{$test_files} = ' . "\n" . Dumper(sort keys %{$test_files}) . "\n" );
#RPerl::diag( 'in 12_parse.t, have $number_of_test_files = ' . $number_of_test_files . "\n" );
plan tests => $number_of_test_files;
if ( $ENV{RPERL_VERBOSE} ) {
    Test::More::diag( '[[[ Beginning Parser Tests, RPerl Compilation System' . ' ]]]' );
}
# [[[ PRIMARY RUNLOOP ]]]
# [[[ PRIMARY RUNLOOP ]]]
# [[[ PRIMARY RUNLOOP ]]]
for my $test_file ( sort keys %{$test_files} ) {
#    RPerl::diag( 'in 12_parse.t, have $test_file = ' . $test_file . "\n" );
    ( my string $rperl_input_file_name, my string_hashref $cpp_output_file_name_group, my string_hashref $cpp_source_group, my string_hashref $modes ) = @ARG;
    # NEED UPGRADE: enable file dependencies as in script/rperl depends_parse_generate_save_subcompile_execute()
    my $eval_return_value = eval {
        RPerl::Compiler::rperl_to_xsbinary__parse_generate_compile(
            $test_file,
            undef,    # empty $cpp_output_file_name_group, no files will be saved in PARSE mode
            {},       # empty $cpp_source_group, starting compile process from scratch, not continued
            {   
#                dependencies => 'OFF',  # unnecessary
                ops     => 'PERL',
                types   => 'PERL',
#                check        => 'TRACE',    # unnecessary
                uncompile    => 'OFF',
                compile => 'PARSE',
#                subcompile   => 'OFF',  # unnecessary
#                CXX          => 'g++',  # unnecessary
                parallel => 'OFF',
#                execute => 'OFF',  # unnecessary
#                label   => 'OFF'   # unnecessary
            }
        );    # returns void
        1;    # return true
    };
#    RPerl::diag( 'in 12_parse.t, have $eval_return_value = ' . $eval_return_value . "\n" );  # warning if undef retval
    if ( ( defined $eval_return_value ) and $eval_return_value ) {    # Perl eval return code defined & true, success
        if ( ( $test_file =~ m/Bad/xms ) or ( $test_file =~ m/bad/xms ) ) {
            ok( 0, 'Program or module parses with errors:' . (q{ } x 13) . $test_file );
#            $number_of_tests_run++;
        }
        else {
            ok( 1, 'Program or module parses without errors:' . (q{ } x 10) . $test_file );
#            $number_of_tests_run++;
        }
    }
    else {                                                            # Perl eval return code undefined or false, error
        print $verbose_newline;
#        RPerl::diag( "\n\n\n" . 'in 12_parse.t, have $EVAL_ERROR = ' . $EVAL_ERROR . "\n\n\n" );
        if ( ( $test_file =~ m/Bad/ms ) or ( $test_file =~ m/bad/ms ) ) {
#            RPerl::diag( 'in 12_parse.t, have BAD $test_file = ' . $test_file . "\n" );
            my $missing_errors = [];
            if ( defined $test_files->{$test_file}->{errors} ) {
                foreach my $error ( @{ $test_files->{$test_file}->{errors} } ) {
#                    RPerl::diag('in 12_parse.t, have $error = ' . $error . "\n" );
                    # DEV NOTE: debug to show which tests trigger a Helpful Hint
#                    if ( $EVAL_ERROR =~ /Helpful\ Hint/xms ) {
#                        print '[[[ YES HELPFUL HINT ' . $test_file . ' ]]]' . "\n\n";
#                    }
                     
                    if ( $EVAL_ERROR !~ /\Q$error\E/xms ) {
                        push @{$missing_errors}, "Error message '$error' expected, but not found";
                    }
                }
            }
            ok( ( ( scalar @{$missing_errors} ) == 0 ), 'Program or module parses with expected error(s):' . (q{ } x 2) . $test_file );
            if (( scalar @{$missing_errors} ) != 0) {
                diag((join "\n", @{$missing_errors}) . "\n");
            }
#            $number_of_tests_run++;
        }
        else {
            ok( 0, 'Program or module parses without errors:' . (q{ } x 10) . $test_file );
            diag('Error output captured:' . "\n" . $EVAL_ERROR);
#            $number_of_tests_run++;
        }
    }
}
#RPerl::diag( 'in 12_parse.t, have $number_of_tests_run =' . $number_of_tests_run . "\n" );
done_testing();
#done_testing($number_of_tests_run);