#!/bin/bash
# Copyright © 2014, 2015, 2016, 2017, 2018, William N. Braswell, Jr.. All Rights Reserved. This work is Free \& Open Source; you can redistribute it and/or modify it under the same terms as Perl 5.24.0.
# RPerl Installer Script (directly copied from LAMP Installer Script)
VERSION='0.470_000'
# IMPORTANT DEV NOTE: do not edit anything in this file without making the exact same changes to LAMP_installer.sh!!!
# IMPORTANT DEV NOTE: do not edit anything in this file without making the exact same changes to LAMP_installer.sh!!!
# IMPORTANT DEV NOTE: do not edit anything in this file without making the exact same changes to LAMP_installer.sh!!!
# PRE-PRE-INSTALL: install wget
# sudo apt-get install wget
# OR
# sudo yum install wget
# PRE-INSTALL: download the latest version of this file and make it executable
# rm ./rperl_installer.sh; wget https://raw.githubusercontent.com/wbraswell/rperl/master/script/rperl_installer.sh; chmod a+x ./rperl_installer.sh
# OR
# rm ./NEED_FILENAME; wget tinyurl.com/NEED_NEW_TINYURL; chmod a+x NEED_NEW_TINYURL
# enable extended pattern matching in case statements
shopt -s extglob
# global variables
USER_INPUT=''
CURRENT_SECTION=0
# command-line arguments
HELP_CHOICE="no" # DEFAULT NO
DEVELOPER_CHOICE="no" # DEFAULT NO
SECTION_CHOICE="__EMPTY__"
MACHINE_CHOICE="__EMPTY__"
OS_CHOICE="__EMPTY__"
PERL_INSTALL_CHOICE="__EMPTY__"
RPERL_INSTALL_CHOICE="__EMPTY__"
# block comment template
: <<'END_COMMENT'
foo bar bat
END_COMMENT
# command-line arguments AKA options
for i in "$@"
do
case $i in
-?|-h|--help)
HELP_CHOICE="yes"
shift
;;
-d=*|--developer=*)
DEVELOPER_CHOICE="${i#*=}"
shift
;;
-s=*|--section=*)
SECTION_CHOICE="${i#*=}"
shift
;;
-m=*|--machine=*)
MACHINE_CHOICE="${i#*=}"
shift
;;
-os=*|--operating-system=*)
OS_CHOICE="${i#*=}"
shift
;;
-pi=*|--perl-install=*)
PERL_INSTALL_CHOICE="${i#*=}"
shift
;;
-ri=*|--rperl-install=*)
RPERL_INSTALL_CHOICE="${i#*=}"
shift
;;
*)
# unknown argument, ignore
;;
esac
done
echo 'Received the following command-line arguments AKA options:'
echo "HELP_CHOICE = ${HELP_CHOICE}"
echo "DEVELOPER_CHOICE = ${DEVELOPER_CHOICE}"
echo "SECTION_CHOICE = ${SECTION_CHOICE}"
echo "MACHINE_CHOICE = ${MACHINE_CHOICE}"
echo "OS_CHOICE = ${OS_CHOICE}"
echo " PERL_INSTALL_CHOICE = ${PERL_INSTALL_CHOICE}"
echo "RPERL_INSTALL_CHOICE = ${RPERL_INSTALL_CHOICE}"
echo
if [ $HELP_CHOICE == 'yes' ]; then
echo 'LAMP Installer Script'
echo 'Usage:'
echo ' LAMP_installer.sh [ARGUMENTS]'
echo
echo 'Arguments:'
echo ' -? ...OR... -h ...OR... --help'
echo ' Print this (relatively) brief help message for command-line usage.'
echo
echo ' -d=[yes|no] ...OR... --developer=[yes|no]'
echo ' Execute commands for developer sections, or not.'
echo
echo ' -s=INTEGER ...OR... --section=INTEGER'
echo ' Execute commands starting at specified section number.'
echo
echo ' -m=[new|existing] ...OR... --machine=[new|existing]'
echo ' Execute commands for new or existing machine.'
echo
echo ' -os=[ubuntu|centos] ...OR... --operating-system=[ubuntu|centos]'
echo ' Execute commands for specified operating system.'
echo
echo ' -pi=[locallib|perlbrew|source|system] ...OR... --perl-install=[locallib|perlbrew|source|system]'
echo ' Execute commands for specified Perl installation option.'
echo
echo ' -ri=[packages|cpanm-single|cpanm-system|cpan-single|cpan-system|github-secure-git|github-public-git|github-public-zip] ...OR...'
echo ' -rperl-install=[packages|cpanm-single|cpanm-system|cpan-single|cpan-system|github-secure-git|github-public-git|github-public-zip]'
echo ' Execute commands for specified RPerl installation option.'
echo
exit
fi
CURRENT_SECTION_COMPLETE () {
echo
echo '[[[ SECTION' $CURRENT_SECTION 'COMPLETE ]]]'
echo
CURRENT_SECTION=$((CURRENT_SECTION+1))
while true; do
read -p "Continue to section $CURRENT_SECTION, yes or no? [yes] " -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; exit;;
y|Y ) echo; echo; break;;
# ' ' ) echo;; # NEED FIX: space ' ' should not trigger empty ''
'' ) echo; break;;
* ) echo;;
esac
done
}
SOURCE () { # source (.) with error check & note
echo '$ source' $1
while true; do
read -p 'Run above command, yes or no? [yes] ' -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; return;;
y|Y ) echo; break;;
'' ) break;;
* ) echo;;
esac
done
if [ -f "$1" ]; then
source $1
echo '[ NOTE: When This Installer Exits, You Must Then Copy & Re-Run The Above Command, Or Log Out & Log Back In If The File Is ~/.bashrc ]'
else
echo 'Cannot source file ' $1 ' because such file does not exist'
fi
}
CD () { # _C_hange _D_irectory with error check
CD_DIR="${1/#\~/$HOME}" # replace ~/FOO with $HOME/FOO to avoid 'directory not found' error
echo '$ cd' $CD_DIR
while true; do
read -p 'Run above command, yes or no? [yes] ' -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; return;;
y|Y ) echo; break;;
'' ) break;;
* ) echo;;
esac
done
if [ -d "$CD_DIR" ]; then
cd $CD_DIR
else
echo 'Cannot change directory to ' $CD_DIR ' because such directory does not exist'
fi
}
C () { # _C_onfirm user action
echo $1
while true; do
read -p 'Did you do it, yes or no? [yes] ' -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; echo $1;;
y|Y ) echo; echo; break;;
# ' ' ) echo;; # NEED FIX: space ' ' should not trigger empty ''
'' ) echo; break;;
* ) echo;;
esac
done
}
P () { # _P_rompt user for input
if [[ $1 != '__EMPTY__' ]]; then
USER_INPUT=$1
return
fi
while true; do
read -p "Please type the $2... " USER_INPUT
case $USER_INPUT in
# do not force input to start with lowercase letter or forward slash; do not limit any keyboard characters because of passwords
# [abcdefghijklmnopqrstuvwxyz/]+([abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_./]) ) echo; break;;
+([abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789\~\!\@\#\$\%\^\&\*\(\)\-\_\=\+\[\]\{\}\\\|\/\?\,\.\<\>]) ) echo; break;;
* ) echo "Please type the $2! "; echo;;
esac
done
}
N () { # prompt user for _N_umeric input
if [[ $1 != '__EMPTY__' ]]; then
USER_INPUT=$1
return
fi
while true; do
read -p "Please type the $2... " USER_INPUT
case $USER_INPUT in
[0123456789]+([0123456789.]) ) echo; break;;
* ) echo "Please type the $2! "; echo;;
esac
done
}
D () { # prompt user for input w/ _D_efault value
if [[ $1 != '__EMPTY__' ]]; then
USER_INPUT=$1
return
fi
while true; do
read -p "Please type the $2, or press <ENTER> for $3... " USER_INPUT
case $USER_INPUT in
+([abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789\~\!\@\#\$\%\^\&\*\(\)\-\_\=\+\[\]\{\}\\\|\/\?\,\.\<\>]) ) echo; break;;
'' ) echo; USER_INPUT=$3; break;;
* ) echo "Please type the $2, or press <ENTER> for $3! "; echo;;
esac
done
}
S () { # _S_udo command
# DEV NOTE: attempting to use S() as a shortcut to B() does not work, adds unnecessary logic to B() and incorrectly strips newline characters from commands
# B sudo $@ # WRONG
# DEV NOTE: using just plain $@ works for commands wrapped all in double-quotes such as redirected echo commands (presumably all stored as a single word in only ${01});
# but $@ does NOT work for normal multi-word commands (not just stored in ${01}), must use $COMMAND to handle both cases
COMMAND=" ${01} ${02} ${03} ${04} ${05} ${06} ${07} ${08} ${09} ${10} ${11} ${12} ${13} ${14} ${15} ${16} ${17} ${18} ${19} \
${20} ${21} ${22} ${23} ${24} ${25} ${26} ${27} ${28} ${29} ${30} ${31} ${32} ${33} ${34} ${35} ${36} ${37} ${38} ${39} \
${40} ${41} ${42} ${43} ${44} ${45} ${46} ${47} ${48} ${49} ${50} ${51} ${52} ${53} ${54} ${55} ${56} ${57} ${58} ${59} \
${60} ${61} ${62} ${63} ${64} ${65} ${66} ${67} ${68} ${69} ${70} ${71} ${72} ${73} ${74} ${75} ${76} ${77} ${78} ${79} \
${80} ${81} ${82} ${83} ${84} ${85} ${86} ${87} ${88} ${89} ${90} ${91} ${92} ${93} ${94} ${95} ${96} ${97} ${98} ${99} "
# echo '$' $@ # WRONG
echo '$' $COMMAND
while true; do
read -p 'Run above command AS ROOT, yes or no? [yes] ' -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; return;;
y|Y ) echo; break;;
'' ) break;;
* ) echo;;
esac
done
# sudo bash -c " $@ " # WRONG
sudo bash -c " $COMMAND "
echo
}
B () { # _B_ash command
COMMAND=" ${01} ${02} ${03} ${04} ${05} ${06} ${07} ${08} ${09} ${10} ${11} ${12} ${13} ${14} ${15} ${16} ${17} ${18} ${19} \
${20} ${21} ${22} ${23} ${24} ${25} ${26} ${27} ${28} ${29} ${30} ${31} ${32} ${33} ${34} ${35} ${36} ${37} ${38} ${39} \
${40} ${41} ${42} ${43} ${44} ${45} ${46} ${47} ${48} ${49} ${50} ${51} ${52} ${53} ${54} ${55} ${56} ${57} ${58} ${59} \
${60} ${61} ${62} ${63} ${64} ${65} ${66} ${67} ${68} ${69} ${70} ${71} ${72} ${73} ${74} ${75} ${76} ${77} ${78} ${79} \
${80} ${81} ${82} ${83} ${84} ${85} ${86} ${87} ${88} ${89} ${90} ${91} ${92} ${93} ${94} ${95} ${96} ${97} ${98} ${99} "
echo '$' $COMMAND
while true; do
read -p 'Run above command, yes or no? [yes] ' -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; return;;
y|Y ) echo; break;;
'' ) break;;
* ) echo;;
esac
done
bash -c " $COMMAND "
echo
}
VERIFY_OS_CHOICE() {
local OS_REQ="$1"
local CHOICE="$OS_CHOICE"
local GUESS='UNKNOWN'
if [[ -f "/etc/redhat-release" ]]; then
GUESS='centos'
elif [[ -f "/etc/debian_version" ]]; then
GUESS='ubuntu'
fi
if [[ "$GUESS" != "$CHOICE" ]]; then
PROMPT="NOT OK: OS_CHOICE is $CHOICE but I think you are running $GUESS ! Proceed? "
while true; do
read -p "$PROMPT" -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; exit 1;;
y|Y ) echo; break;;
* ) echo;;
esac
done
fi
if [[ "$OS_REQ" != "$CHOICE" ]]; then
PROMPT="NOT OK: OS must be $OS_REQ but you chose $OS_CHOICE! Proceed Anyway? "
while true; do
read -p "$PROMPT" -n 1 PROMPT_INPUT
case $PROMPT_INPUT in
n|N ) echo; echo; exit 1;;
y|Y ) echo; break;;
* ) echo;;
esac
done
echo
fi
}
VERIFY_CENTOS() {
VERIFY_OS_CHOICE 'centos'
}
VERIFY_UBUNTU() {
VERIFY_OS_CHOICE 'ubuntu'
}
# do not provide menu prompt if already provided as command-line argument
if [ $SECTION_CHOICE == '__EMPTY__' ]; then
echo "[[[<<< LAMP Installer Script v$VERSION >>>]]]"
echo
echo ' [[[<<< Tested Using Fresh Installs >>>]]]'
echo
echo 'Xubuntu v14.04.2 (Trusty Tahr)'
echo 'Xubuntu v16.04.4 (Xenial Xerus)'
echo 'CentOS v7.4-1708'
echo
echo ' [[[<<< Main Menu >>>]]]'
echo
echo ' <<< PERL & RPERL SECTIONS >>>'
echo '20. [[[ LINUX, INSTALL PERL DEPENDENCIES ]]]'
echo '21. [[[ LINUX, INSTALL PERL & CPANM ]]]'
echo '22. [[[ LINUX, PACKAGE RPERL DEPENDENCIES, DEVELOPERS ONLY ]]]'
echo '23. [[[ LINUX, INSTALL RPERL DEPENDENCIES ]]]'
echo '24. [[[ PERL, INSTALL RPERL ]]]'
echo '25. [[[ RPERL, RUN COMPILER TESTS ]]]'
echo '26. [[[ RPERL, INSTALL RPERL APPS & RUN DEMOS ]]]'
echo
while true; do
read -p 'Please type your chosen main menu section number, or press <ENTER> for 0... ' SECTION_CHOICE
case $SECTION_CHOICE in
[0123456789]|[1234][0123456789]|5[01]|60 ) echo; break;;
'' ) echo; SECTION_CHOICE=0; break;;
* ) echo 'Please choose a section number from the menu!'; echo;;
esac
done
fi
CURRENT_SECTION=$SECTION_CHOICE
# do not provide menu prompt if already provided as command-line argument
if [ $MACHINE_CHOICE == '__EMPTY__' ]; then
echo ' [[[<<< Machine Menu >>>]]]'
echo
echo \ '0. [[[ NEW MACHINE; SERVER; REMOTE CLOUD HOST ]]]'
echo \ '1. [[[ EXISTING MACHINE; CLIENT; LOCAL USER SYSTEM ]]]'
echo
while true; do
read -p 'Please type your machine menu choice number, or press <ENTER> for 0... ' MACHINE_CHOICE
case $MACHINE_CHOICE in
[01] ) echo; break;;
'' ) echo; MACHINE_CHOICE=0; break;;
* ) echo 'Please choose a number from the menu!'; echo;;
esac
done
fi
# do not provide menu prompt if already provided as command-line argument
if [ $OS_CHOICE == '__EMPTY__' ]; then
echo ' [[[<<< OS Menu >>>]]]'
echo
echo \ '0. [[[ UBUNTU ]]]'
echo \ '1. [[[ CENTOS ]]]'
echo \ '9. [[[ OTHER ]]]'
echo
while true; do
read -p 'Please type your OS menu choice number, or press <ENTER> for 0... ' OS_CHOICE
case $OS_CHOICE in
0 ) echo; OS_CHOICE='ubuntu'; break;;
1 ) echo; OS_CHOICE='centos'; break;;
9 ) echo; OS_CHOICE='OTHER'; break;;
'' ) echo; OS_CHOICE='ubuntu'; break;;
* ) echo 'Please choose a number from the menu!'; echo;;
esac
done
fi
if [ $SECTION_CHOICE -le 20 ]; then
echo '20. [[[ LINUX, INSTALL PERL DEPENDENCIES ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
echo '[ Overview Of Perl Dependencies In This Section ]'
echo '[ CPAN: The Comprehensive Perl Archive Network, Required For Installing Perl Software ]'
echo '[ Perl Debug: Symbols For The Perl Interpreter, Optional For Perl Core & XS & RPerl Debugging ]'
echo '[ Git: Source Code Version Control, Required To Install Latest Development & Unstable Software ]'
echo '[ Make: Program Builder, Required To Build ExtUtils::MakeMaker ]'
echo '[ cURL: Downloader, Required To Install cpanminus & Perlbrew & Perl-Build ]'
echo '[ ExtUtils::MakeMaker: Source Code Builder, Required To Build Many Perl Software Suites ]'
echo
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
echo '[ Install Perl Debugging Symbols System-Wide ]'
S apt-get install perl-debug
echo '[ Install git ]'
S apt-get install git
echo '[ Install make ]'
S apt-get install make
echo '[ Install cURL ]'
S apt-get install curl
echo '[ Check Install, Confirm No Errors ]'
S apt-get -f install
# OR
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
echo '[ Install CPAN ]'
S yum install perl-core perl-CPAN
echo '[ Install Perl Debugging Symbols System-Wide ]'
echo '[ NOT CURRENTLY AVAILABLE FOR CENTOS ]'
echo '[ Install git ]'
S yum install git
echo '[ Install make ]'
S yum install make
echo '[ Install cURL ]'
S yum install curl
if [ $DEVELOPER_CHOICE == 'yes' ]; then
echo '[ Check Install, Confirm No Errors; WARNING! MAY TAKE HOURS TO RUN! ]'
S yum check
fi
fi
echo '[ Check cURL Installation ]'
B 'curl -L cpanmin.us > /dev/null'
echo
echo '[ Look For Any Errors In The Output From The curl Command Above ]'
echo '[ WARNING: IF AND ONLY IF The Above curl Command Gives The Error On The Following Line, THEN Execute The echo Command In The Next Step ]'
echo 'curl: (77) error setting certificate verify locations'
echo
C 'Please read the warning above. Seriously.'
echo
B "echo 'cacert=/etc/ssl/certs/ca-certificates.crt' >> ~/.curlrc"
echo '[ Optionally Disable Previous local::lib Or Perlbrew Installations ]'
echo '[ NOTE: You SHOULD Disable Any Previous Perl Installations, Unless You Know What You Are Doing ]'
B mv ~/perl5 ~/perl5.old
echo '[ Install ExtUtils::MakeMaker System-Wide, Check Current System-Wide Version, Must Be v7.04 Or Newer ]'
S 'perl -MExtUtils::MakeMaker\ 999' # system-wide v7.04 or newer required by Inline::C & possibly others
echo '[ Install ExtUtils::MakeMaker System-Wide ]'
echo '[ NOTE: You MUST Have v7.04 Or Newer Installed System-Wide (And Also Single-User) For RPerl ]'
# DEV NOTE: create Perl lib dirs due to CentOS bug, dirs should already exist but do not, checked by CPAN::FirstTime::_can_write_to_libdirs()
echo '[ Ensure Perl Library Directories Exist ]'
S "perl -e 'use Config; use File::Path qw(make_path); foreach my \$dir_key (qw(installprivlib installarchlib installsitelib installsitearch)) { if (not -e \$Config{\$dir_key}) { my \$success = make_path(\$Config{\$dir_key}); if (\$success) { print q{Created directory: }, \$Config{\$dir_key}, qq{\\n}; } else { print q{Error, could not create directory: }, \$Config{\$dir_key}, qq{\\n}, \$!, qq{\\n}; } } else { print q{Directory already exists: }, \$Config{\$dir_key}, qq{\\n}; } }'"
echo '[ Choose "yes" For Automatic Configuration & Also "yes" For Automatic CPAN Mirror Selection ]'
echo '[ Choose "sudo" For Installation Approach If Previous Command Does Not Solve "Warning: You do not have write permission for Perl library directories." ]'
S cpan ExtUtils::MakeMaker
echo '[ Install ExtUtils::MakeMaker System-Wide, Check Updated Version, Must Be v7.04 Or Newer ]'
S 'perl -MExtUtils::MakeMaker\ 999'
echo '[ Check Perl Version To Determine Which Of The Following Sections To Choose ]'
B perl -v
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
# SECTION 21 VARIABLES
#PERL_INSTALL_CHOICE='__EMPTY__' # this is now a global variable for command-line args, see top of file
if [ $SECTION_CHOICE -le 21 ]; then
echo '21. [[[ LINUX, INSTALL PERL & CPANM ]]]'
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
if [ $PERL_INSTALL_CHOICE == '__EMPTY__' ]; then
echo 'Please carefully read the following instructions, in order to choose a Perl installation option...'
echo
echo '21a. [[[ LINUX, INSTALL SINGLE-USER PERL LOCAL::LIB & CPANM ]]]'
echo ' [ You SHOULD Use This Instead Of Perlbrew Or Perl From Source Or System Perl In Sections 21b & 21c & 21d, Unless You Have No Choice ]'
echo ' [ This Option Will Contain All Perl Code In Your Home Directory Under The ~/perl5 Subdirectory ]'
echo ' [ This Option May Not Work With Older Versions Of Debian GNU/Linux Which Include A Broken Perl v5.14, Use Perlbrew in Section 21b Instead ]'
echo ' [ This Option Will Not Work With Older Versions Of Perl Which Are Not At Least v5.10 Or Newer, Use Perlbrew in Section 21b Instead ]'
echo
echo '__OR__ '
echo
echo '21b. [[[ LINUX, INSTALL SINGLE-USER PERLBREW & CPANM ]]]'
echo ' [ You SHOULD NOT Use This Instead Of local::lib In Section 21a, Unless You Have No Choice ]'
echo ' [ This Option WILL Work With Older Versions Of Debian GNU/Linux Which Include A Broken Perl v5.14 ]'
echo ' [ This Option WILL Work With Older Versions Of Perl Which Are Not At Least v5.10 Or Newer ]'
echo
echo '__OR__ '
echo
echo '21c. [[[ LINUX, INSTALL SYSTEM-WIDE PERL FROM SOURCE & CPANM ]]]'
echo ' [ You SHOULD NOT Use This Instead Of local::lib In Section 21a, Unless You Have No Choice ]'
echo
echo '__OR__ '
echo
echo '21d. [[[ LINUX, INSTALL SYSTEM-WIDE SYSTEM PERL & CPANM ]]]'
echo '[ You SHOULD NOT Use This Instead Of local::lib In Section 21a, Unless You Have No Choice ]'
echo '[ This Option Will Install Both Perl & cpanminus System-Wide ]'
echo '[ Also, All Future CPAN Distributions Will Install System-Wide In A Hard-To Control Manner ]'
echo
C 'Please read the warnings above. Seriously.'
echo
P $PERL_INSTALL_CHOICE $'letter or word for a Perl installation option:\n[a] locallib\n[b] perlbrew\n[c] source\n[d] system\n'
PERL_INSTALL_CHOICE=$USER_INPUT
fi
if [ $PERL_INSTALL_CHOICE == 'a' ] || [ $PERL_INSTALL_CHOICE == 'locallib' ]; then
echo '21a. [[[ LINUX, INSTALL SINGLE-USER PERL LOCAL::LIB & CPANM ]]]'
echo '[ Install local::lib & CPANM in ~/perl5 ]'
B 'curl -L cpanmin.us | perl - -l $HOME/perl5 App::cpanminus local::lib'
echo '[ Enable local::lib In .bashrc Run Commands Startup File ]'
echo '[ NOTE: Do Not Run The Following Step If You Already Copied Your Own Pre-Existing LAMP University .bashrc File In Section 0 ]'
# DEV NOTE: pre-munged command for comparison
# if [ -d $HOME/perl5/lib/perl5 ]; then
# eval $(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)
# fi
# START HERE: need add following 6 lines to munged echo statement below...
# START HERE: need add following 6 lines to munged echo statement below...
# START HERE: need add following lines to munged echo statement below...
# if ! [[ ":$PERL5LIB:" == *":$HOME/perl5/lib/perl5:"* ]]; then
# export PERL5LIB=$HOME/perl5/lib/perl5:$PERL5LIB
# fi
# if ! [[ ":$PERL5LIB:" == *":$HOME/perl5/lib/perl5/x86_64-linux:"* ]]; then
# export PERL5LIB=$HOME/perl5/lib/perl5/x86_64-linux:$PERL5LIB
# fi
# fi
B echo -e '"# enable local::lib, do NOT mix with Perlbrew\nif [ -d"' '\$HOME/perl5/lib/perl5 ]\; then' '"\n "' "'" eval '$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)' "'" '"\nfi\n"' '>> ~/.bashrc'
SOURCE ~/.bashrc
echo '[ Ensure The Following 4 Environmental Variables Now Include ~/perl5: PERL_MM_OPT, PERL_MB_OPT, PERL5LIB, PATH ]'
echo '[ If Not, Please Log Out & Log Back In, Then Return To This Point & Check Again ]'
B 'set | grep perl5'
elif [ $PERL_INSTALL_CHOICE == 'b' ] || [ $PERL_INSTALL_CHOICE == 'perlbrew' ]; then
echo '21b. [[[ LINUX, INSTALL SINGLE-USER PERLBREW & CPANM ]]]'
echo '[ You Should Use Ubuntu Or CentOS Instead Of curl Below, Unless You Are Not In Ubuntu Or CentOS, Or You Have No Choice ]'
echo '[ WARNING: Use Only ONE Of The Following Three Options, EITHER Ubuntu OR CentOS OR curl, But NOT More Than One! ]'
C 'Please read the warning above. Seriously.'
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
echo '[ Install Perlbrew ]'
S apt-get install perlbrew
echo '[ Check Install, Confirm No Errors ]'
S apt-get -f install
# OR
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
echo '[ WARNING: Use Only ONE Of The Following Two CentOS Options, EITHER CPAN OR perlbrew_install.sh, But NOT More Than One! ]'
C 'Please read the warning above. Seriously.'
echo '[ CENTOS & CPAN ONLY: Install Perl & CPAN ]'
S yum install perl perl-core perl-CPAN perl-CPAN-Meta
# DEV NOTE: create Perl lib dirs due to CentOS bug, dirs should already exist but do not, checked by CPAN::FirstTime::_can_write_to_libdirs()
echo '[ CENTOS & CPAN ONLY: Ensure Perl Library Directories Exist ]'
S "perl -e 'use Config; use File::Path qw(make_path); foreach my \$dir_key (qw(installprivlib installarchlib installsitelib installsitearch)) { if (not -e \$Config{\$dir_key}) { my \$success = make_path(\$Config{\$dir_key}); if (\$success) { print q{Created directory: }, \$Config{\$dir_key}, qq{\\n}; } else { print q{Error, could not create directory: }, \$Config{\$dir_key}, qq{\\n}, \$!, qq{\\n}; } } else { print q{Directory already exists: }, \$Config{\$dir_key}, qq{\\n}; } }'"
echo '[ CENTOS & CPAN ONLY: Install CPANM ]'
S cpan App::cpanminus
echo '[ CENTOS & CPAN ONLY: Install Perlbrew ]'
S cpanm -v --notest App::perlbrew
# OR
echo '[ CENTOS & perlbrew_install.sh ONLY: Install GCC Compiler & Other Requirements ]'
S yum install gcc bzip2 patch
echo '[ CENTOS & perlbrew_install.sh ONLY: Download perlbrew_install.sh Script ]'
B curl -L https://install.perlbrew.pl -o perlbrew_install.sh
echo '[ CENTOS & perlbrew_install.sh ONLY: Run perlbrew_install.sh Script ]'
B chmod a+x ./perlbrew_install.sh && ./perlbrew_install.sh
if [ $DEVELOPER_CHOICE == 'yes' ]; then
echo '[ Check Install, Confirm No Errors; WARNING! MAY TAKE HOURS TO RUN! ]'
S yum check
fi
fi
# OR
echo '[ CURL ONLY: Install Perlbrew; DO NOT USE IF apt-get OR yum WAS SUCCESSFUL! ]'
S 'curl -L http://install.perlbrew.pl | bash'
echo '[ Configure Perlbrew ]'
B perlbrew init
echo '[ In Texas, The Following Perlbrew Mirror Is Recommended: Arlington, TX #222 http://mirror.uta.edu/CPAN/ ]'
B perlbrew mirror
B 'echo "source ~/perl5/perlbrew/etc/bashrc" >> ~/.bashrc'
SOURCE ~/.bashrc
echo '[ Ensure The Following 3 Environmental Variables Now Include ~/perl5: PERLBREW_MANPATH, PERLBREW_PATH, PERLBREW_ROOT ]'
B 'set | grep perl5'
echo '[ Build Perlbrew Perl v5.24.0 ]'
B perlbrew install perl-5.24.0
echo '[ Temporaily Enable Perlbrew Perl v5.24.0 ]'
B perlbrew use perl-5.24.0
echo '[ Permanently Enable Perlbrew Perl v5.24.0 ]'
B perlbrew switch perl-5.24.0
echo '[ Install Perlbrew CPANM ]'
B perlbrew install-cpanm
echo '[ ExtUtils::MakeMaker v7.04 Or Newer Is Required By Inline::C, May Need To Re-Install In Single-User Mode ]'
echo '[ Check Version Of ExtUtils::MakeMaker, Re-Install If Older Than v7.04 ]'
B 'perl -MExtUtils::MakeMaker\ 999'
echo '[ Re-Install ExtUtils::MakeMaker Via CPAN, Because Perlbrew Acts As System-Wide Perl In Single-User Mode ]'
echo '[ NOTE: You MUST Have v7.04 Or Newer Installed System-Wide (And Also Single-User) For RPerl ]'
B cpanm -v --notest ExtUtils::MakeMaker
echo '[ Re-Check Version Of ExtUtils::MakeMaker, Must Be v7.04 Or Newer ]'
B 'perl -MExtUtils::MakeMaker\ 999'
elif [ $PERL_INSTALL_CHOICE == 'c' ] || [ $PERL_INSTALL_CHOICE == 'source' ]; then
echo '21c. [[[ LINUX, INSTALL SYSTEM-WIDE PERL FROM SOURCE & CPANM ]]]'
echo '[ WARNING: Choose ONLY ONE Of The Following Two Methods: Manual Build, Or Tokuhirom Perl-Build ]'
C 'Please read the warning above. Seriously.'
# NEED ANSWER: does this actually work?
echo '[ MANUAL BUILD ONLY: Download Perl Source Code ]'
B 'wget http://www.cpan.org/src/5.0/perl-5.24.0.tar.bz2; tar -xjvf perl-5.24.0.tar.bz2'
echo '[ MANUAL BUILD ONLY: Build Perl Source Code ]'
B 'cd perl-5.24.0; ./Configure -des; make; make test'
echo '[ MANUAL BUILD ONLY: Install Perl Build ]'
S 'cd perl-5.24.0; make install'
# OR
echo '[ TOKUHIROM PERL-BUILD ONLY: Download, Build, Install Perl ]'
# NEED ANSWER: does this actually work?
S 'curl https://raw.githubusercontent.com/tokuhirom/Perl-Build/master/perl-build | perl - 5.24.0 /usr/local/bin/perl-5.24.0/'
echo '[ EITHER OPTION: Install cpanminus ]'
S perl -MCPAN -e 'install App::cpanminus'
elif [ $PERL_INSTALL_CHOICE == 'd' ] || [ $PERL_INSTALL_CHOICE == 'system' ]; then
echo '21d. [[[ LINUX, INSTALL SYSTEM-WIDE SYSTEM PERL & CPANM ]]]'
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
echo '[ Install Perl & CPANM ]'
S apt-get install perl cpanminus
echo '[ Check Install, Confirm No Errors ]'
S apt-get -f install
# OR
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
echo '[ Install Perl & CPANM Dependencies ]'
S yum install perl-core perl-libs perl-devel perl-CPAN curl
echo '[ Install CPANM System-Wide ]'
S 'curl -L http://cpanmin.us | perl - --sudo App::cpanminus'
if [ $DEVELOPER_CHOICE == 'yes' ]; then
echo '[ Check Install, Confirm No Errors; WARNING! MAY TAKE HOURS TO RUN! ]'
S yum check
fi
fi
else
echo "ERROR: Unrecognized value for PERL_INSTALL_CHOICE, '${PERL_INSTALL_CHOICE}', please see '--help' option for valid values"
fi
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
# SECTION 22 VARIABLES
# overwrites previous settings, makes it easier to copy-and-paste from LAMP_installer.sh to rperl_installer.sh
EDITOR='__EMPTY__'
USERNAME='__EMPTY__'
if [ $SECTION_CHOICE -le 22 ] && [ $DEVELOPER_CHOICE != 'yes' ]; then
echo '22. [[[ LINUX, PACKAGE RPERL DEPENDENCIES ]]]'
echo
echo 'SKIPPING! Developer Sections Disabled'
echo
CURRENT_SECTION_COMPLETE
elif [ $SECTION_CHOICE -le 22 ]; then
echo '22. [[[ LINUX, PACKAGE RPERL DEPENDENCIES ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
# [[[ FPM ]]]
# [[[ FPM ]]]
# [[[ FPM ]]]
# fpm, install deps
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
S apt-get install ruby ruby-dev rubygems build-essential
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
S yum install ruby-devel gcc make rpm-build rubygems perl-generators
fi
S gem update --system # must have RubyGems >= v2.7.5 to avoid "Errno::EPERM: Operation not permitted @ chown_internal" on `bundle install` for fpm dev version
S cpan App::cpanminus
# fpm, install release version
S gem install --no-ri --no-rdoc fpm
B which fpm
B fpm --version
B fpm --verbose -s cpan -t rpm ExtUtils::MakeMaker
# SRPM START HERE: to build source packages, figure out which parts to insert into spec file via --edit, BuildRequires & Obsoletes %build & %install & %check https://src.fedoraproject.org/cgit/rpms/perl-IO-Compress.git/tree/perl-IO-Compress.spec
# SRPM START HERE: to build source packages, figure out which parts to insert into spec file via --edit, BuildRequires & Obsoletes %build & %install & %check https://src.fedoraproject.org/cgit/rpms/perl-IO-Compress.git/tree/perl-IO-Compress.spec
# SRPM START HERE: to build source packages, figure out which parts to insert into spec file via --edit, BuildRequires & Obsoletes %build & %install & %check https://src.fedoraproject.org/cgit/rpms/perl-IO-Compress.git/tree/perl-IO-Compress.spec
B fpm --verbose --debug-workspace --edit --no-cpan-test -s cpan -t rpm IO::Compress::Gzip
B rpm -qp --whatprovides ./perl-IO-Compress-2.081-1.noarch.rpm # package not installed
B rpm -q --whatprovides perl-IO-Compress # package installed
B repoquery --provides perl-IO-Compress # package installed or not
# fpm, install dev version
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
S apt-get install bsdtar
elif [[ "$OS_CHOICE" == "centos" ]]; then
S yum install bsdtar
elif [[ "$OS_CHOICE" == "macosx" ]]; then
VERIFY_MACOSX
S xcode-select --install # Mac OS 10.9 (Mavericks)
fi
S gem install bundler
B mkdir -p ~/repos_github
# B git clone git@github.com:jordansissel/fpm.git ~/repos_github/fpm-latest
B git clone https://github.com/wbraswell/fpm.git ~/repos_github/fpm-fork-latest
CD ~/repos_github/fpm-fork-latest
S bundle install
# OUTPUT: ... Using FOO (X.Y.Z) Using fpm (X.Y.Z) from source at `.` Using BAR (X.Y.Z) ...
B make
# ERRORS MAY OCCUR, it should work anyway
B export PATH=~/repos_github/fpm-fork-latest/bin:$PATH
B which fpm
B fpm --version
# fpm, build RPerl package w/out deps
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
B reset; rm -Rf ~/cpantofpm_tmp/* ~/cpantofpm_packages/*; cd ~/cpantofpm_packages/; time fpm --no-cpan-test --cpan-verbose --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/cpantofpm_tmp/ -s cpan -t deb --deb-?? RPerl
elif [[ "$OS_CHOICE" == "centos" ]]; then
B reset; rm -Rf ~/cpantofpm_tmp/* ~/cpantofpm_packages/*; cd ~/cpantofpm_packages/; time fpm --no-cpan-test --cpan-verbose --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/cpantofpm_tmp/ -s cpan -t rpm --rpm-ba RPerl
fi
# [[[ FPM-Cookery ]]]
# [[[ FPM-Cookery ]]]
# [[[ FPM-Cookery ]]]
S gem install bundler
B mkdir -p ~/repos_github
B git clone https://github.com/bernd/fpm-cookery.git ~/repos_github/fpm-cookery-latest
CD ~/repos_github/fpm-cookery-latest
S bundle install # ignore warning about not running as root, must run as root for `sudo fpm-cook install-deps` to find facter.rb & other fpm-cookery runtime deps
B rake spec --trace # run tests, may seem frozen for 5 - 10 minutes
B export PATH=~/repos_github/fpm-cookery-latest/bin:$PATH
B which fpm-cook
B fpm-cook --version
B mkdir -p ~/fpm_cookery_tmp
CD ~/fpm_cookery_tmp
B vi recipe.rb
#class Tmux < FPM::Cookery::Recipe
# description 'terminal multiplexer'
# name 'tmux'
# version '1.9a'
# homepage 'http://tmux.github.io'
# source 'https://github.com/tmux/tmux/releases/download/1.9a/tmux-1.9a.tar.gz'
# build_depends 'libevent-devel', 'ncurses-devel'
# depends 'libevent-2.0*'
# def build
# configure :prefix => prefix
# make
# end
# def install
# make :install, 'DESTDIR' => destdir
# end
#end
S ~/repos_github/fpm-cookery-latest/bin/fpm-cook install-deps
B fpm-cook
# [[[ CPANtoFPM ]]]
# [[[ CPANtoFPM ]]]
# [[[ CPANtoFPM ]]]
# cpantofpm, install deps
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
S apt-get install expect # for unbuffer
elif [[ "$OS_CHOICE" == "centos" ]]; then
S yum install expect # for unbuffer
fi
S cpan Module::CoreList
S cpan Alien::Build
B cpanm -v --notest MetaCPAN::Client
# FPM THEN START HERE: FPM CPAN pull request pacman test failures; DEB support; RPM mock support
# FPM THEN START HERE: FPM CPAN pull request pacman test failures; DEB support; RPM mock support
# FPM THEN START HERE: FPM CPAN pull request pacman test failures; DEB support; RPM mock support
# FPM THEN START HERE: merge FPM & FPM-Cookery to enable SPEC/SRPM output;; __OR__;; get fpm to accept SPEC file as input; rebuild libbson & mongo-c-driver & mongo-cxx-driver using SPEC files & fpm; manually build SPEC files for PCRE2 & JPCRE2 & PLUTO
# FPM THEN START HERE: merge FPM & FPM-Cookery to enable SPEC/SRPM output;; __OR__;; get fpm to accept SPEC file as input; rebuild libbson & mongo-c-driver & mongo-cxx-driver using SPEC files & fpm; manually build SPEC files for PCRE2 & JPCRE2 & PLUTO
# FPM THEN START HERE: merge FPM & FPM-Cookery to enable SPEC/SRPM output;; __OR__;; get fpm to accept SPEC file as input; rebuild libbson & mongo-c-driver & mongo-cxx-driver using SPEC files & fpm; manually build SPEC files for PCRE2 & JPCRE2 & PLUTO
# FPM THEN START HERE: remove comments in lib/fpm/package/cpan.rb; save all deps files in correct DEPS folder; skip processing if rpm/srpm/spec/dep files already present, else run fpm w/ force option to overwrite existing file(s); save file names in $distributions_processed & use to make tarball
# FPM THEN START HERE: remove comments in lib/fpm/package/cpan.rb; save all deps files in correct DEPS folder; skip processing if rpm/srpm/spec/dep files already present, else run fpm w/ force option to overwrite existing file(s); save file names in $distributions_processed & use to make tarball
# FPM THEN START HERE: remove comments in lib/fpm/package/cpan.rb; save all deps files in correct DEPS folder; skip processing if rpm/srpm/spec/dep files already present, else run fpm w/ force option to overwrite existing file(s); save file names in $distributions_processed & use to make tarball
# cpantofpm, set hostname to be embedded in packages
S vi /etc/hostname && hostname -F /etc/hostname && hostname # packages.rperl.org
# cpantofpm, set path to executable
B export PATH=~/repos_gitlab/app-cpantofpm-latest/bin/:$PATH # NEED FIX, HARD-CODED SHORTCUTS TO ~/cpantofpm BELOW
# __OR__
B cd; rm ./cpantofpm ; vi ./cpantofpm ; chmod a+x ./cpantofpm
# cpantofpm, build RPerl package w/ deps
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
B reset; rm -Rf ~/cpantofpm_tmp/* ~/cpantofpm_packages/*; cd ~/cpantofpm_packages/; time ~/cpantofpm -t deb RPerl
elif [[ "$OS_CHOICE" == "centos" ]]; then
B reset; rm -Rf ~/cpantofpm_tmp/* ~/cpantofpm_packages/*; cd ~/cpantofpm_packages/; time ~/cpantofpm -t rpm RPerl
fi
# [[[ AStyle ]]]
# [[[ AStyle ]]]
# [[[ AStyle ]]]
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
CD ~/cpantofpm_packages/x86_64/
B wget https://github.com/wbraswell/astyle-mirror/raw/master/backup/astyle-2.05.1-1.el7.centos.x86_64.rpm
CD ~/cpantofpm_packages/SRPMS/
B wget https://github.com/wbraswell/astyle-mirror/raw/master/backup/astyle-2.05.1-1.el7.centos.src.rpm
# NEED UPGRADE: copy spec file out of srpm into SPECS/ directory
fi
# [[[ PCRE2 ]]]
# [[[ PCRE2 ]]]
# [[[ PCRE2 ]]]
CD ~/
B wget https://ftp.pcre.org/pub/pcre/pcre2-10.31.tar.gz
B tar -xzvf pcre2-10.31.tar.gz
CD pcre2-10.31
B ./configure --enable-pcre2-16 --enable-pcre2-32 --disable-shared --enable-jit
B make
B make check
B mkdir -p ~/fpm_tmp_install && rm -Rf ~/fpm_tmp_install/*
B make install DESTDIR=~/fpm_tmp_install
CD ~/
B mkdir -p ~/fpm_tmp_work && rm -Rf ~/fpm_tmp_work/*
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
B reset; time fpm --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/fpm_tmp_work/ -s dir -t rpm --rpm-ba -p libpcre2-VERSION_ARCH.rpm -n libpcre2 -v 10.31 -C ~/fpm_tmp_install usr/local/lib usr/local/bin usr/local/share
B rm libpcre2-10.31_x86_64.rpm # prefer file naming uniformity with '-1' in all file names
B cp ~/fpm_tmp_work/package-rpm-build-*/RPMS/x86_64/libpcre2-10.31-1.x86_64.rpm ~/cpantofpm_packages/x86_64/
B cp ~/fpm_tmp_work/package-rpm-build-*/SRPMS/libpcre2-10.31-1.src.rpm ~/cpantofpm_packages/SRPMS/
B cp ~/fpm_tmp_work/package-rpm-build-*/SPECS/libpcre2.spec ~/cpantofpm_packages/SPECS/
B mkdir -p ~/fpm_tmp_work && rm -Rf ~/fpm_tmp_work/*
B reset; time fpm --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/fpm_tmp_work/ -s dir -t rpm --rpm-ba -p libpcre2-dev_VERSION_ARCH.rpm -n libpcre2-dev -v 10.31 -C ~/fpm_tmp_install usr/local/include
B rm libpcre2-dev_10.31_x86_64.rpm # prefer file naming uniformity with '-1' in all file names
B cp ~/fpm_tmp_work/package-rpm-build-*/RPMS/x86_64/libpcre2-dev-10.31-1.x86_64.rpm ~/cpantofpm_packages/x86_64/
B cp ~/fpm_tmp_work/package-rpm-build-*/SRPMS/libpcre2-dev-10.31-1.src.rpm ~/cpantofpm_packages/SRPMS/
B cp ~/fpm_tmp_work/package-rpm-build-*/SPECS/libpcre2-dev.spec ~/cpantofpm_packages/SPECS/
fi
B rm -Rf pcre2-10.31.tar.gz pcre2-10.31 ~/fpm_tmp_work ~/fpm_tmp_install
# [[[ JPCRE2 ]]]
# [[[ JPCRE2 ]]]
# [[[ JPCRE2 ]]]
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
S rpm -i ~/cpantofpm_packages/x86_64/libpcre2-10.31-1.x86_64.rpm
S rpm -i ~/cpantofpm_packages/x86_64/libpcre2-dev-10.31-1.x86_64.rpm
fi
CD ~/
B wget https://github.com/jpcre2/jpcre2/archive/10.31.02-2.tar.gz -O jpcre2-10.31.02-2.tar.gz
B tar -xzvf jpcre2-10.31.02-2.tar.gz
CD jpcre2-10.31.02-2
B ./configure --disable-cpp11 --enable-test
B make
B make check
B mkdir -p ~/fpm_tmp_install && rm -Rf ~/fpm_tmp_install/*
B make install DESTDIR=~/fpm_tmp_install
CD ~/
B mkdir -p ~/fpm_tmp_work && rm -Rf ~/fpm_tmp_work/*
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
B reset; time fpm --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/fpm_tmp_work/ -s dir -t rpm --rpm-ba -p libjpcre2-dev_VERSION_ARCH.rpm -n libjpcre2-dev -v 10.31.02-2 -d "libpcre2 >= 10.31" -d "libpcre2-dev >= 10.31" -C ~/fpm_tmp_install usr/local/include usr/local/share/doc
B rm libjpcre2-dev_10.31.02_2_x86_64.rpm # prefer file naming uniformity with '-1' in all file names
B cp ~/fpm_tmp_work/package-rpm-build-*/RPMS/x86_64/libjpcre2-dev-10.31.02_2-1.x86_64.rpm ~/cpantofpm_packages/x86_64/
B cp ~/fpm_tmp_work/package-rpm-build-*/SRPMS/libjpcre2-dev-10.31.02_2-1.src.rpm ~/cpantofpm_packages/SRPMS/
B cp ~/fpm_tmp_work/package-rpm-build-*/SPECS/libjpcre2-dev.spec ~/cpantofpm_packages/SPECS/
S rpm -e libpcre2 libpcre2-dev
fi
B rm -Rf jpcre2-10.31.02-2.tar.gz jpcre2-10.31.02-2 ~/fpm_tmp_work/ ~/fpm_tmp_install/
# [[[ Pluto ]]]
# [[[ Pluto ]]]
# [[[ Pluto ]]]
CD ~/
B wget https://github.com/bondhugula/pluto/files/737550/pluto-0.11.4.tar.gz
B tar -xzvf pluto-0.11.4.tar.gz
CD pluto-0.11.4
B ./configure
B make
B make test
B mkdir -p ~/fpm_tmp_install && rm -Rf ~/fpm_tmp_install/*
B make install DESTDIR=~/fpm_tmp_install
CD ~/
B mkdir -p ~/fpm_tmp_work && rm -Rf ~/fpm_tmp_work/*
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
B reset; time fpm --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/fpm_tmp_work/ -s dir -t rpm --rpm-ba -p pluto-polycc-VERSION_ARCH.rpm -n pluto-polycc -v 0.11.4 -C ~/fpm_tmp_install usr/local/lib usr/local/bin usr/local/share
B rm pluto-polycc-0.11.4_x86_64.rpm # prefer file naming uniformity with '-1' in all file names
B cp ~/fpm_tmp_work/package-rpm-build-*/RPMS/x86_64/pluto-polycc-0.11.4-1.x86_64.rpm ~/cpantofpm_packages/x86_64/
B cp ~/fpm_tmp_work/package-rpm-build-*/SRPMS/pluto-polycc-0.11.4-1.src.rpm ~/cpantofpm_packages/SRPMS/
B cp ~/fpm_tmp_work/package-rpm-build-*/SPECS/pluto-polycc.spec ~/cpantofpm_packages/SPECS/
B mkdir -p ~/fpm_tmp_work && rm -Rf ~/fpm_tmp_work/*
B reset; time fpm --verbose --debug-workspace --maintainer 'William N. Braswell, Jr. <william.braswell@NOSPAM.autoparallel.com>' --workdir ~/fpm_tmp_work/ -s dir -t rpm --rpm-ba -p pluto-polycc-dev-VERSION_ARCH.rpm -n pluto-polycc-dev -v 0.11.4 -C ~/fpm_tmp_install usr/local/include
B rm pluto-polycc-dev-0.11.4_x86_64.rpm # prefer file naming uniformity with '-1' in all file names
B cp ~/fpm_tmp_work/package-rpm-build-*/RPMS/x86_64/pluto-polycc-dev-0.11.4-1.x86_64.rpm ~/cpantofpm_packages/x86_64/
B cp ~/fpm_tmp_work/package-rpm-build-*/SRPMS/pluto-polycc-dev-0.11.4-1.src.rpm ~/cpantofpm_packages/SRPMS/
B cp ~/fpm_tmp_work/package-rpm-build-*/SPECS/pluto-polycc-dev.spec ~/cpantofpm_packages/SPECS/
fi
B rm -Rf pluto-0.11.4.tar.gz pluto-0.11.4 ~/fpm_tmp_work/ ~/fpm_tmp_install/
# [[[ BSON ]]]
# [[[ BSON ]]]
# [[[ BSON ]]]
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
echo '[ Build RPerl Dependencies, MongoDB C++ Driver Prerequisites, BSON libbson ]'
# perl-interpreter is a dummy package for CentOS 7 compatibility with Fedora source packages libbson & mongo-c-driver
S yum install rpm-build libtool cyrus-sasl-lib cyrus-sasl-devel snappy-devel perl-interpreter python-sphinx
# B wget http://dl.fedoraproject.org/pub/fedora/linux/updates/27/SRPMS/Packages/l/libbson-1.9.3-1.fc27.src.rpm # DEV NOTE: prefer GitHub mirror below
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.9.3-1.fc27.src.rpm # DEV NOTE: prefer our own GitHub mirror for uniformity
S rpm -i -vv ./libbson-1.9.3-1.fc27.src.rpm
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson.spec
S mv ./libbson.spec /root/rpmbuild/SPECS/libbson.spec
S rpmbuild -ba /root/rpmbuild/SPECS/libbson.spec
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/libbson-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/libbson-devel-1.9.3-1.el7.centos.x86_64.rpm # provides pkgconfig(libbson-1.0) to satisfy mongodb-c-driver requirements
# DEV NOTE: check if SRPM can be rebuilt
# B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.9.3-1.el7.centos.src.rpm
# B rpm -ivh ./libbson-1.9.3-1.el7.centos.src.rpm
# S yum-builddep libbson
# B rpmbuild -v -ba ~/rpmbuild/SPECS/libbson.spec
# DEV NOTE: copy our own pre-built packages into CPANtoFPM directory structure
CD ~/cpantofpm_packages/SPECS/
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson.spec
CD ~/cpantofpm_packages/SRPMS/
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.9.3-1.el7.centos.src.rpm
CD ~/cpantofpm_packages/x86_64/
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-devel-1.9.3-1.el7.centos.x86_64.rpm
fi
# [[[ MongoDB C Driver ]]]
# [[[ MongoDB C Driver ]]]
# [[[ MongoDB C Driver ]]]
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
echo '[ Build RPerl Dependencies, MongoDB C++ Driver Prerequisites, MongoDB C Driver ]'
# B wget http://dl.fedoraproject.org/pub/fedora/linux/updates/27/SRPMS/Packages/m/mongo-c-driver-1.9.3-1.fc27.src.rpm # DEV NOTE: prefer GitHub mirror below
# B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-1.9.3-1.fc27.src.rpm # DEV NOTE: prefer our own GitHub mirror for uniformity
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-1.9.3-1.el7.centos.src.rpm # DEV NOTE: prefer our own re-built source RPMs for uniformity
S rpm -i -vv mongo-c-driver-1.9.3-1.fc27.src.rpm
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver.spec
S mv ./mongo-c-driver.spec /root/rpmbuild/SPECS/mongo-c-driver.spec
S systemctl stop mongodb.service
S rpmbuild -ba /root/rpmbuild/SPECS/mongo-c-driver.spec
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-c-driver-libs-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-c-driver-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-c-driver-devel-1.9.3-1.el7.centos.x86_64.rpm
S systemctl start mongodb.service
# DEV NOTE: copy our own pre-built packages into CPANtoFPM directory structure
CD ~/cpantofpm_packages/SPECS/
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver.spec
CD ~/cpantofpm_packages/SRPMS/
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-1.9.3-1.el7.centos.src.rpm
CD ~/cpantofpm_packages/x86_64/
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-libs-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-devel-1.9.3-1.el7.centos.x86_64.rpm
fi
# [[[ MongoDB C++ Driver ]]]
# [[[ MongoDB C++ Driver ]]]
# [[[ MongoDB C++ Driver ]]]
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
# BEGIN UBUNTU MANUAL BUILD, MONGOCXX C++ DRIVER
D $EDITOR 'preferred text editor' 'vi'
EDITOR=$USER_INPUT
D $USERNAME "new machine's username" `whoami`
USERNAME=$USER_INPUT
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Download & Uncompress ]'
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-3.2.0.tar.gz
B tar -xzvf mongo-cxx-driver-3.2.0.tar.gz && cd mongo-cxx-driver-3.2.0/build
# CMake Error at /usr/lib/x86_64-linux-gnu/cmake/libbson-1.0/libbson-1.0-config.cmake:28 (message): File or directory /usr/lib/include/libbson-1.0 referenced by variable BSON_INCLUDE_DIRS does not exist !
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Copy The Following Line ]'
echo "set (PACKAGE_PREFIX_DIR /usr) # WBRASWELL 20180615 2018.166: manually set PACKAGE_PREFIX_DIR due to CMake 'does not exist' failures"
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Paste The Now-Copied Line Immediately BEFORE The Following Line ]'
echo "set_and_check (BSON_INCLUDE_DIRS \"${PACKAGE_PREFIX_DIR}/include/libbson-1.0\")"
S $EDITOR /usr/lib/x86_64-linux-gnu/cmake/libbson-1.0/libbson-1.0-config.cmake
# CMake Error at /usr/lib/x86_64-linux-gnu/cmake/libmongoc-1.0/libmongoc-1.0-config.cmake:31 (message): File or directory /usr/lib/include/libmongoc-1.0 referenced by variable MONGOC_INCLUDE_DIRS does not exist !
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Paste The Now-Copied Line AGAIN Immediately BEFORE The Following Line ]'
echo "set_and_check (MONGOC_INCLUDE_DIRS \"${PACKAGE_PREFIX_DIR}/include/libmongoc-1.0\")"
S $EDITOR /usr/lib/x86_64-linux-gnu/cmake/libmongoc-1.0/libmongoc-1.0-config.cmake
# CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: BSON_LIBRARY MONGOC_LIBRARY
# B cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/lib ..
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Configure The C++ Build Process ]'
B cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr -DMONGOC_LIBRARY=/usr/lib/x86_64-linux-gnu/libmongoc-1.0.so -DBSON_LIBRARY=/usr/lib/x86_64-linux-gnu/libbson-1.0.so ..
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Build & Install The Minimalistic Polyfill ]'
S make EP_mnmlstc_core
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Build ]'
B make
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Install ]'
S make install
# S ln -sf /usr/lib/pkgconfig/libmongocxx.pc /usr/share/pkgconfig/libmongocxx.pc # NOT NECESSARY IN UBUNTU???
# S ln -sf /usr/lib/pkgconfig/libbsoncxx.pc /usr/share/pkgconfig/libbsoncxx.pc # NOT NECESSARY IN UBUNTU???
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Before Running Optional Test Program, Please Install MongoDB Server Via LAMP Installer SECTION 60 [[[ UBUNTU LINUX, INSTALL MONGODB ]]] ]'
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Save Test Program ]'
B printf "#include <iostream>\n#include <bsoncxx/builder/stream/document.hpp>\n#include <bsoncxx/json.hpp>\n#include <mongocxx/client.hpp>\n#include <mongocxx/instance.hpp>\nint main(int, char**) {\n mongocxx::instance inst{};\n mongocxx::client conn{mongocxx::uri{}};\n bsoncxx::builder::stream::document document{};\n auto collection = conn[\"testdb\"][\"testcollection\"];\n document << \"hello\" << \"world\";\n collection.insert_one(document.view());\n auto cursor = collection.find({});\n for (auto&& doc : cursor) {\n std::cout << bsoncxx::to_json(doc) << std::endl;\n }\n}" > ./mongocxx_test.cpp
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Compile Test Program ]'
B c++ --std=c++11 mongocxx_test.cpp -o mongocxx_test -I/usr/include/mongocxx/v_noabi -I/usr/include/bsoncxx/v_noabi/ -L/usr/lib -Wl,-rpath,/usr/lib -lmongocxx -lbsoncxx
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Run Test Program ]'
B ./mongocxx_test
echo '[ UBUNTU MANUAL BUILD ONLY: Install RPerl Dependency MongoDB C++ Driver; Delete Test Program ]'
B rm -Rf ./mongocxx_test*
# END UBUNTU MANUAL BUILD, MONGOCXX C++ DRIVER
elif [[ "$OS_CHOICE" == "centos" ]]; then
# # DEV NOTE: prefer pre-built RPMs below
# echo '[ Build RPerl Dependencies, MongoDB C++ Driver Prerequisites, Fix Broken CMake Files ]'
# # NEED ANSWER: can we fix this CMake error permanently by including --enable-static in configure for both libbson & mongo-c-driver above???
# # CMake Error at /lib64/cmake/libbson-1.0/libbson-1.0-config.cmake:28 (message): File or directory //include/libbson-1.0 referenced by variable BSON_INCLUDE_DIRS does not exist !
# B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.0-config.cmake
# S mv ./libbson-1.0-config.cmake /lib64/cmake/libbson-1.0/libbson-1.0-config.cmake
# # CMake Error at /lib64/cmake/libmongoc-1.0/libmongoc-1.0-config.cmake:30 (message): File or directory //include/libmongoc-1.0 referenced by variable MONGOC_INCLUDE_DIRS does not exist !
# B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/libmongoc-1.0-config.cmake
# S mv ./libmongoc-1.0-config.cmake /lib64/cmake/libmongoc-1.0/libmongoc-1.0-config.cmake
echo '[ Build RPerl Dependencies, MongoDB C++ Driver ]'
S yum install cmake3
# # DEV NOTE: prefer already-fixed tarball below
# B wget https://github.com/mongodb/mongo-cxx-driver/archive/r3.2.0.tar.gz
# S mv ./r3.2.0.tar.gz /root/rpmbuild/SOURCES/mongo-cxx-driver-3.2.0.tar.gz
# CD /root/rpmbuild/SOURCES
# S tar -xzvf mongo-cxx-driver-3.2.0.tar.gz
# S mv mongo-cxx-driver-r3.2.0 mongo-cxx-driver-3.2.0
# S rm mongo-cxx-driver-3.2.0.tar.gz
# S tar -czvf mongo-cxx-driver-3.2.0.tar.gz ./mongo-cxx-driver-3.2.0
# DEV NOTE: prefer our own already-fixed tarball below, for convenience
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-3.2.0.tar.gz
S mv ./mongo-cxx-driver-3.2.0.tar.gz /root/rpmbuild/SOURCES/mongo-cxx-driver-3.2.0.tar.gz
CD /root/rpmbuild/SPECS
S wget https://raw.githubusercontent.com/wbraswell/mongo-cxx-driver-mirror/master/mongo-cxx-driver.spec
S rpmbuild -ba /root/rpmbuild/SPECS/mongo-cxx-driver.spec
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-cxx-driver-libs-3.2.0-1.el7.centos.x86_64.rpm
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-cxx-driver-3.2.0-1.el7.centos.x86_64.rpm
S rpm -i -vv /root/rpmbuild/RPMS/x86_64/mongo-cxx-driver-devel-3.2.0-1.el7.centos.x86_64.rpm
# DEV NOTE: copy our own pre-built packages into CPANtoFPM directory structure
CD ~/cpantofpm_packages/SPECS/
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver.spec
CD ~/cpantofpm_packages/SRPMS/
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-3.2.0-1.el7.centos.src.rpm
CD ~/cpantofpm_packages/x86_64/
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-libs-3.2.0-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-3.2.0-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-devel-3.2.0-1.el7.centos.x86_64.rpm
fi
# [[[ RPM, YUM REPOSITORY ]]]
# [[[ RPM, YUM REPOSITORY ]]]
# [[[ RPM, YUM REPOSITORY ]]]
# server, install deps, RUN ONCE ONLY
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
S apt-get install createrepo yum-utils gnupg2 gnupg-agent rng-tools
elif [[ "$OS_CHOICE" == "centos" ]]; then
S yum install createrepo yum-utils gnupg2 rng-tools
fi
# server, prepare to receive RPMs tarball
S mkdir -p /srv/www/packages.rperl.org/public_html/centos/7/rperl
CD /srv/www/packages.rperl.org/public_html/centos/7/rperl
S rm -Rf DEPS SPECS SRPMS x86_64 *.tar.gz
# packager machine, create & transfer RPMs tarball
B ~/manual_packages_copy.sh
CD ~/cpantofpm_packages
B tar -czvf ./perl-RPerl-VERSION-1-RPM_ALL_DEPS.tar.gz ./*
B scp ./perl-RPerl-VERSION-1-RPM_ALL_DEPS.tar.gz packages.rperl.org:/srv/www/packages.rperl.org/public_html/centos/7/rperl/
# server, unpack RPMs tarball & set initial permissions
CD /srv/www/packages.rperl.org/public_html/centos/7/rperl
B tar -xzvf perl-RPerl-VERSION-1-RPM_ALL_DEPS.tar.gz
S chown -R www-data.www-data /srv/www/packages.rperl.org/
S chmod -R g+rwX,o-w /srv/www/packages.rperl.org/
# server, generate & export & import GPG keys, RUN ONCE ONLY
S rngd -r /dev/urandom
B gpg2 --full-gen-key
# William N. Braswell, Jr. (packages.rperl.org) <william.braswell@autoparallel.com>
B gpg2 --list-keys
B gpg2 --export --armor "William N. Braswell, Jr. (packages.rperl.org) <william.braswell@autoparallel.com>" > /srv/www/packages.rperl.org/public_html/centos/RPM-GPG-KEY-RPerl-7
B less /srv/www/packages.rperl.org/public_html/centos/RPM-GPG-KEY-RPerl-7 # confirm key has been exported
B rpmkeys --import /srv/www/packages.rperl.org/public_html/centos/RPM-GPG-KEY-RPerl-7
B rpm -q gpg-pubkey --qf '%{NAME}-%{VERSION}-%{RELEASE}\t%{SUMMARY}\n' # confirm key has been imported
# server, prepare to sign RPMs, RUN ONCE ONLY
B vi ~/.rpmmacros
# %_signature gpg
# %_gpg_name William N. Braswell, Jr. (packages.rperl.org) <william.braswell@autoparallel.com>
# %_gpg_bin /usr/bin
# %__gpg /usr/bin/gpg2
# server, sign RPMs & confirm signed
CD /srv/www/packages.rperl.org/public_html/centos/7/rperl
B export GPG_TTY=$(tty)
B rpmsign --addsign SRPMS/*.rpm x86_64/*.rpm
B rpm -qpi SRPMS/*.rpm x86_64/*.rpm | grep Signature
# server, create repo & sign repo metadata & confirm signed
CD /srv/www/packages.rperl.org/public_html/centos/7/rperl/x86_64
B rm -Rf ./repodata/
B createrepo --verbose .
B gpg2 --detach-sign --armor repodata/repomd.xml
B less repodata/repomd.xml.asc
# server, generate repo file, RUN ONCE ONLY
B vi /srv/www/packages.rperl.org/public_html/centos7-perl-cpan.repo
[centos7-perl-cpan]
name=CentOS 7 Perl CPAN Repository
baseurl=https://packages.rperl.org/centos/7/rperl/x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.rperl.org/centos/RPM-GPG-KEY-RPerl-7
# server, set final permissions
S chown -R www-data.www-data /srv/www/packages.rperl.org/
S chmod -R g+rwX,o-w /srv/www/packages.rperl.org/
# [[[ DEB, APT REPOSITORY ]]]
# [[[ DEB, APT REPOSITORY ]]]
# [[[ DEB, APT REPOSITORY ]]]
# DEB START HERE: set up server, set up client, install
# DEB START HERE: set up server, set up client, install
# DEB START HERE: set up server, set up client, install
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
if [ $SECTION_CHOICE -le 23 ]; then
echo '23. [[[ LINUX, INSTALL RPERL DEPENDENCIES ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
echo '[ Overview Of RPerl Dependencies In This Section ]'
echo '[ GCC: gcc & g++ Required For Compiling ]'
echo '[ libc: libcrypt.(a|so) Required For Compiling ]'
echo '[ libperl: libperl.(a|so) & perl.h etc, Required For Compiling ]'
echo '[ openssl: err.h Required By RPerl Subdependency Net::SSLeay From IO::Socket::SSL From ... From Alien::* ]'
echo '[ zlib: zlib.h Required By SDL.pm, Itself Required For Graphics In RPerl Applications ]'
echo '[ GMP: GNU Multiple-Precision Arithmetic Library Required For Math ]'
echo '[ GSL: GNU Scientific Library Required For Math ]'
echo '[ Pluto polyCC: polycc Required For Parallel Compiling, Depends On texinfo flex bison ]'
echo '[ AStyle: Artistic Style C++ Formatter, Required By RPerl Test Suite ]'
echo '[ pkg-config: Compilation Library Detection Tool, Required By RPerl Support For MongoDB ]'
echo '[ MongoDB Drivers: Both C & C++, Required By RPerl Support For MongoDB ]'
echo
# DEV NOTE: libperl packages in Ubuntu vs CentOS
# Ubuntu, libperl-dev, /usr/lib/x86_64-linux-gnu/libperl.so SYMLINK /usr/lib/x86_64-linux-gnu/libperl.a REAL FILE
# Ubuntu, libperl5.XX, /usr/lib/x86_64-linux-gnu/libperl.so.5.XX.Y REAL FILE /usr/lib/x86_64-linux-gnu/perl/5.26.0/CORE/perl.h and other *.h *.so *.pm *.ph files
# CentOS 7, perl-libs, /usr/lib64/perl5/CORE/libperl.so
# CentOS 7, perl-devel, /usr/lib64/perl5/CORE/perl.h /usr/bin/h2xs and other *.h files
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
echo '[ Add Non-Base APT Repositories ]'
S add-apt-repository \"deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main universe restricted multiverse\"
echo '[ Update APT Repositories ]'
S apt-get update
echo '[ Install RPerl Dependencies ]'
S apt-get install g++ make libc6-dev perl libperl-dev libssl-dev zlib1g zlib1g-dev libgmp10 libgmpxx4ldbl libgmp-dev libgsl0-dev texinfo flex bison astyle
echo '[ Install RPerl Dependencies, MongoDB C++ Driver Prerequisites, pkg-config ]'
S apt-get install pkg-config
# DEB START HERE: build & use our own libbson & libmongoc & libmongocxx packages, remove use of Bionic repo below
# DEB START HERE: build & use our own libbson & libmongoc & libmongocxx packages, remove use of Bionic repo below
# DEB START HERE: build & use our own libbson & libmongoc & libmongocxx packages, remove use of Bionic repo below
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; Must Use Latest libbson & libmongoc From Bionic v18.04 Repositories ]"
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; In Xenial v16.04, Temporarily Replace All Occurrences Of 'xenial' With 'bionic' (Same For Other Non-Bionic Releases), Skip If Already Using Bionic Or Newer ]"
S $EDITOR /etc/apt/sources.list
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; Update To Bionic v18.04 Repositories, Skip If Already Using Bionic Or Newer ]"
S apt-get update
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; Install libbson & libmongoc From Bionic v18.04 Repositories ]"
S apt-get install libbson-1.0-0 libbson-dev libmongoc-1.0-0 libmongoc-dev
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; In Xenial v16.04, Replace All Occurrences Of 'bionic' With Original 'xenial' (Same For Other Non-Bionic Releases), Skip If Already Using Bionic Or Newer ]"
S $EDITOR /etc/apt/sources.list
echo "[ Install RPerl Dependencies, MongoDB C & C++ Drivers; Update To Original Non-Bionic Repositories, Skip If Already Using Bionic Or Newer ]"
S apt-get update
echo '[ Check Install, Confirm No Errors ]'
S apt-get -f install
# OR
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
# RPM START HERE: remove wget & rpm below w/ yum via packages.rperl.org, astyle & libbson & libmongoc & libmongocxx & pluto
# RPM START HERE: remove wget & rpm below w/ yum via packages.rperl.org
# RPM START HERE: remove wget & rpm below w/ yum via packages.rperl.org
echo '[ Install RPerl Dependencies ]'
S yum install gcc-c++ make glibc-devel perl-core perl-libs perl-devel openssl-devel zlib zlib-static zlib-devel gmp gmp-static gmp-devel gsl gsl-devel texinfo flex bison
echo '[ Install RPerl Dependencies, GCC/G++ GDB Debugging Symbols ]'
# S debuginfo-install cracklib-2.9.0-11.el7.x86_64 cyrus-sasl-lib-2.1.26-21.el7.x86_64 glibc-2.17-196.el7_4.2.x86_64 keyutils-libs-1.5.8-3.el7.x86_64 krb5-libs-1.15.1-8.el7.x86_64 libcom_err-1.42.9-10.el7.x86_64 libgcc-4.8.5-16.el7_4.2.x86_64 libselinux-2.5-11.el7.x86_64 libstdc++-4.8.5-16.el7_4.2.x86_64 nspr-4.13.1-1.0.el7_3.x86_64 nss-3.28.4-15.el7_4.x86_64 nss-softokn-freebl-3.28.3-8.el7_4.x86_64 nss-util-3.28.4-3.el7.x86_64 openldap-2.4.44-5.el7.x86_64 openssl-libs-1.0.2k-8.el7.x86_64 pcre-8.32-17.el7.x86_64 postgresql96-libs-9.6.8-1PGDG.rhel7.x86_64 zlib-1.2.7-17.el7.x86_64
S debuginfo-install cracklib cyrus-sasl-lib glibc keyutils-libs krb5-libs libcom_err libgcc libselinux libstdc++ nspr nss nss-softokn-freebl nss-util openldap openssl-libs pcre postgresql96-libs zlib
echo '[ Download & Install RPerl Dependency AStyle ]'
B wget https://github.com/wbraswell/astyle-mirror/raw/master/backup/astyle-2.05.1-1.el7.centos.x86_64.rpm
S rpm -v -i ./astyle-2.05.1-1.el7.centos.x86_64.rpm
echo '[ Install RPerl Dependencies, MongoDB C++ Driver Prerequisites, pkg-config ]'
S yum install pkgconfig
# OLD VERSIONS, DO NOT USE! libbson v1.3.5-5.el7, mongo-c-driver-libs v1.3.6-1.el7, mongo-c-driver v1.3.6-1.el7
# must have new versions for MongoDB C++ driver compatibility
# "For mongocxx-3.2.x, libmongoc 1.8.2 or later is required." https://mongodb.github.io/mongo-cxx-driver/mongocxx-v3/installation/
# echo '[ Install RPerl Dependencies, MongoDB C++ Driver Prerequisites, MongoDB C Driver ]'
# S yum install pkgconfig mongo-c-driver
echo '[ Install RPerl Dependencies, MongoDB C++ Driver Prerequisites, BSON libbson ]'
# DEV NOTE: use our own pre-built RPMs from GitHub mirror, for speed & reliability & convenience
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/libbson-mirror/raw/master/libbson-devel-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv ./libbson-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv ./libbson-devel-1.9.3-1.el7.centos.x86_64.rpm # provides pkgconfig(libbson-1.0) to satisfy mongodb-c-driver requirements
B rm ./libbson-1.9.3-1.el7.centos.x86_64.rpm
B rm ./libbson-devel-1.9.3-1.el7.centos.x86_64.rpm
echo '[ Install RPerl Dependencies, MongoDB C++ Driver Prerequisites, MongoDB C Driver ]'
# DEV NOTE: prefer our own pre-built RPMs from GitHub mirror, for speed & reliability & convenience
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-libs-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-1.9.3-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-c-driver-mirror/raw/master/mongo-c-driver-devel-1.9.3-1.el7.centos.x86_64.rpm
S systemctl stop mongodb.service
S rpm -i -vv ./mongo-c-driver-libs-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv ./mongo-c-driver-1.9.3-1.el7.centos.x86_64.rpm
S rpm -i -vv ./mongo-c-driver-devel-1.9.3-1.el7.centos.x86_64.rpm
S systemctl start mongodb.service
B rm ./mongo-c-driver-libs-1.9.3-1.el7.centos.x86_64.rpm
B rm ./mongo-c-driver-1.9.3-1.el7.centos.x86_64.rpm
B rm ./mongo-c-driver-devel-1.9.3-1.el7.centos.x86_64.rpm
echo '[ Install RPerl Dependencies, MongoDB C++ Driver ]'
# DEV NOTE: prefer our own pre-built RPMs from GitHub mirror, for speed & reliability & convenience
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-libs-3.2.0-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-3.2.0-1.el7.centos.x86_64.rpm
B wget https://github.com/wbraswell/mongo-cxx-driver-mirror/raw/master/mongo-cxx-driver-devel-3.2.0-1.el7.centos.x86_64.rpm
S rpm -i -vv ./mongo-cxx-driver-libs-3.2.0-1.el7.centos.x86_64.rpm
S rpm -i -vv ./mongo-cxx-driver-3.2.0-1.el7.centos.x86_64.rpm
S rpm -i -vv ./mongo-cxx-driver-devel-3.2.0-1.el7.centos.x86_64.rpm
B rm ./mongo-cxx-driver-libs-3.2.0-1.el7.centos.x86_64.rpm
B rm ./mongo-cxx-driver-3.2.0-1.el7.centos.x86_64.rpm
B rm ./mongo-cxx-driver-devel-3.2.0-1.el7.centos.x86_64.rpm
if [ $DEVELOPER_CHOICE == 'yes' ]; then
echo '[ Check Install, Confirm No Errors; WARNING! MAY TAKE HOURS TO RUN! ]'
S yum check
fi
# OR
elif [[ "$OS_CHOICE" == "OTHER" ]]; then
echo '[ WARNING: Do NOT Use Manual Build Options Below, Unless You Are Not In Ubuntu Or CentOS, Or You Have No Choice! ]'
C 'Please read the warnings above. Seriously.'
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency GCC, Download ]'
B 'wget http://www.netgull.com/gcc/releases/gcc-5.2.0/gcc-5.2.0.tar.bz2; tar -xjvf gcc-5.2.0.tar.bz2'
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency GCC, Build ]'
B 'cd gcc-5.2.0; ./configure; make; make test'
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency GCC, Install ]'
S 'cd gcc-5.2.0; make install'
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency GMP, Visit The Following URL For Installation Instructions ]'
echo 'https://gmplib.org'
echo
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency AStyle, Visit The Following URL For Installation Instructions ]'
echo 'http://astyle.sourceforge.net'
echo
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency Pluto PolyCC, Download ]'
# B 'wget https://github.com/wbraswell/pluto-mirror/raw/master/backup/pluto-0.11.4.tar.gz; tar -xzvf pluto-0.11.4.tar.gz' # prefer official repo below
B 'wget https://github.com/bondhugula/pluto/files/737550/pluto-0.11.4.tar.gz; tar -xzvf pluto-0.11.4.tar.gz'
echo '[ MANUAL BUILD ONLY: Install RPerl Dependency Pluto PolyCC, Build ]'
B 'cd pluto-0.11.4; ./configure; make; make test'
echo '[ Install RPerl Dependency Pluto PolyCC, Install ]'
S 'cd pluto-0.11.4; make install'
fi
echo '[ Check GCC Version, Must Be v4.7 Or Newer; If Automatic Install Options Fail Or Are Too Old, Then Restart Installer & Select OTHER Operating System For Manual Build Option ]'
B g++ --version
echo '[ Check AStyle Version, Must Be v2.05.1 Or Newer; If Automatic Install Options Fail Or Are Too Old, Then Restart Installer & Select OTHER Operating System For Manual Build Option ]'
B astyle -V
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
# SECTION 24 VARIABLES
#RPERL_INSTALL_CHOICE='__EMPTY__' # this is now a global variable for command-line args, see top of file
# SECTION 24b VARIABLES
GITHUB_EMAIL='__EMPTY__'
GITHUB_FIRST_NAME='__EMPTY__'
GITHUB_LAST_NAME='__EMPTY__'
RPERL_REPO_DIR='__EMPTY__'
if [ $SECTION_CHOICE -le 24 ]; then
echo '24. [[[ PERL, INSTALL RPERL ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
if [ $RPERL_INSTALL_CHOICE == '__EMPTY__' ]; then
echo 'Please carefully read the following instructions, in order to choose an RPerl installation option...'
echo
echo '24a. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA PACKAGES.RPERL.ORG ]]]'
echo ' [ You Should Use This Instead Of Stable Via CPAN Or Unstable Via GitHub In The Following Sub-Sections, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Stable Public Release Of RPerl, Pre-Built & Pre-Compiled ]'
echo
echo '__OR__ '
echo
echo '24b. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPANM, SINGLE-USER ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Stable Public Release Of RPerl, Built & Compiled On Your System, Using `cpanm` For Your Single User Only ]'
echo
echo '__OR__ '
echo
echo '24c. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPANM, SYSTEM-WIDE ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Stable Public Release Of RPerl, Built & Compiled On Your System, Using `cpanm` For The Entire System ]'
echo
echo '__OR__ '
echo
echo '24d. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPAN, SINGLE-USER ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Stable Public Release Of RPerl, Built & Compiled On Your System, Using `cpan` For Your Single User Only ]'
echo
echo '__OR__ '
echo
echo '24e. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPAN, SYSTEM-WIDE ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Stable Public Release Of RPerl, Built & Compiled On Your System, Using `cpan` For The Entire System ]'
echo
echo '__OR__ '
echo
echo '24f. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, SECURE GIT ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Unstable Development Release Of RPerl, Built & Compiled On Your System, Using Secure Github For Your Single User Only ]'
echo
echo '__OR__ '
echo
echo '24g. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, PUBLIC GIT ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Unstable Development Release Of RPerl, Built & Compiled On Your System, Using Public Github For Your Single User Only ]'
echo
echo '__OR__ '
echo
echo '24h. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, PUBLIC ZIP ]]]'
echo ' [ You SHOULD NOT Use This Instead Of Stable Via Packages In Section 24a, Unless You Are An RPerl System Developer ]'
echo ' [ This Option Will Install The Latest Unstable Development Release Of RPerl, Built & Compiled On Your System, Using Public Github For Your Single User Only ]'
C 'Please read the warnings above. Seriously.'
echo
P $RPERL_INSTALL_CHOICE $'letter or word for an RPerl installation option:\n[a] packages\n[b] cpanm-single\n[c] cpanm-system\n[d] cpan-single\n[e] cpan-system\n[f] github-secure-git\n[g] github-public-git\n[h] github-public-zip\n'
RPERL_INSTALL_CHOICE=$USER_INPUT
fi
if [ $RPERL_INSTALL_CHOICE == 'a' ] || [ $RPERL_INSTALL_CHOICE == 'packages' ]; then
echo '24a. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA PACKAGES.RPERL.ORG ]]]'
echo
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
# DEB START HERE: create packages
# DEB START HERE: create packages
# DEB START HERE: create packages
echo 'NEED DEB COMMANDS HERE'
elif [[ "$OS_CHOICE" == "centos" ]]; then
S yum install pygpgme # check GPG signatures of repo metadata & packages
S yum-config-manager --add-repo https://packages.rperl.org/centos7-perl-cpan.repo
S yum-config-manager --enable centos7-perl-cpan
S yum repolist all # confirm repo is in list
S yum clean metadata # clean metadata from other repos, or after updating our repo
S yum install perl-RPerl
echo '[ CHECK RPERL INSTALL ]'
B which rperl
B rpm -qf /usr/bin/rperl
echo '[ UNINSTALL RPERL, IF LAST TRANSACTION ]'
S yum history
S yum history undo last
fi
elif [ $RPERL_INSTALL_CHOICE == 'b' ] || [ $RPERL_INSTALL_CHOICE == 'cpanm-single' ]; then
echo '24b. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPANM, SINGLE-USER ]]]'
echo '[ You Should Only Use This Option 24b If local::lib Or Perlbrew Is Installed For Your User ]'
echo
echo '[ Install Problematic RPerl Dependency IO::Socket::SSL, Skip Tests ]'
B cpanm -v --notest IO::Socket::SSL
echo '[ Install Missing Alien::GMP Dependencies ]'
B cpanm -v --notest File::Which FFI::CheckLib Path::Tiny File::chdir Capture::Tiny Alien::GMP
echo '[ Install RPerl ]'
B cpanm -v --notest RPerl
elif [ $RPERL_INSTALL_CHOICE == 'c' ] || [ $RPERL_INSTALL_CHOICE == 'cpanm-system' ]; then
echo '24c. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPANM, SYSTEM-WIDE ]]]'
echo '[ You Should Only Use This Option 24c If local::lib Or Perlbrew Is NOT Installed For Your User ]'
echo
echo '[ Install Problematic RPerl Dependency IO::Socket::SSL, Skip Tests ]'
S cpanm -v --notest IO::Socket::SSL
echo '[ Install Missing Alien::GMP Dependencies ]'
S cpanm -v --notest File::Which FFI::CheckLib Path::Tiny File::chdir Capture::Tiny Alien::GMP
echo '[ Install RPerl ]'
S cpanm -v --notest RPerl
elif [ $RPERL_INSTALL_CHOICE == 'd' ] || [ $RPERL_INSTALL_CHOICE == 'cpan-single' ]; then
echo '24d. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPAN, SINGLE-USER ]]]'
echo '[ You Should Only Use This Option 24d If local::lib Or Perlbrew Is Installed For Your User, And You Do NOT Have CPANM Installed ]'
echo
echo '[ Install Problematic RPerl Dependency IO::Socket::SSL ]'
B cpan -T IO::Socket::SSL
echo '[ Install Missing Alien::GMP Dependencies ]'
B cpan -T --notest File::Which FFI::CheckLib Path::Tiny File::chdir Capture::Tiny Alien::GMP
echo '[ Install RPerl ]'
B cpan -T RPerl
elif [ $RPERL_INSTALL_CHOICE == 'e' ] || [ $RPERL_INSTALL_CHOICE == 'cpan-system' ]; then
echo '24e. [[[ PERL, INSTALL RPERL, LATEST STABLE VIA CPAN, SYSTEM-WIDE ]]]'
echo '[ You Should Only Use This Option 24e If local::lib Or Perlbrew Is NOT Installed For Your User, And You Do NOT Have CPANM Installed ]'
echo
echo '[ Install Problematic RPerl Dependency IO::Socket::SSL ]'
S cpan -T IO::Socket::SSL
echo '[ Install Missing Alien::GMP Dependencies ]'
S cpan -T --notest File::Which FFI::CheckLib Path::Tiny File::chdir Capture::Tiny Alien::GMP
echo '[ Install RPerl ]'
S cpan -T RPerl
elif [ $RPERL_INSTALL_CHOICE == 'f' ] || [ $RPERL_INSTALL_CHOICE == 'github-secure-git' ]; then
echo '24f. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, SECURE GIT ]]]'
echo '[ If You Want To Upload Code To GitHub, Then You Must Use Secure Git Instead Of Public Git Or Public Zip ]'
echo
D $EDITOR 'preferred text editor' 'vi'
EDITOR=$USER_INPUT
D $USERNAME "new machine's username" `whoami`
USERNAME=$USER_INPUT
P $GITHUB_EMAIL "e-mail address used for GitHub account (any value if not using Secure Git option)"
GITHUB_EMAIL=$USER_INPUT
P $GITHUB_FIRST_NAME "first name used for GitHub account (any value if not using Secure Git option)"
GITHUB_FIRST_NAME=$USER_INPUT
P $GITHUB_LAST_NAME "last name used for GitHub account (any value if not using Secure Git option)"
GITHUB_LAST_NAME=$USER_INPUT
D $RPERL_REPO_DIR 'directory where RPerl should be downloaded (different than final RPerl installation directory)' "~/rperl-latest"
RPERL_REPO_DIR=$USER_INPUT
# DEV NOTE: for more info, see https://help.github.com/articles/generating-ssh-keys
#if [ ! -f ~/.ssh/id_rsa.pub ] && [ ! -f ~/.ssh/id_dsa.pub ]; then # NEED ANSWER: do we need id_dsa.pub???
if [ ! -f ~/.ssh/id_rsa.pub ]; then
echo '[ Generate SSH Keys, Do Create Secure Key Passphrase When Prompted ]'
echo '[ WARNING: Be Sure To Record Your Secure Key Passphrase & Store It In A Safe Place ]'
C 'Please read the warning above. Seriously.'
B "ssh-keygen -t rsa -C '$GITHUB_EMAIL'; eval `ssh-agent -s` ssh-add ~/.ssh/id_rsa; ssh-agent -k"
else
echo '[ SSH Key File(s) Already Exist, Skipping Key Generation ]'
fi
if [[ "$OS_CHOICE" == "ubuntu" ]]; then
VERIFY_UBUNTU
echo '[ Install Keychain Key Manager For OpenSSH ]'
S apt-get install keychain
echo '[ Check Install, Confirm No Errors ]'
S apt-get -f install
# OR
elif [[ "$OS_CHOICE" == "centos" ]]; then
VERIFY_CENTOS
# RPM START HERE: why doesn't the below command set work?
# RPM START HERE: why doesn't the below command set work?
# RPM START HERE: why doesn't the below command set work?
C '[ SECURE GIT ON CENTOS: Not Currently Supported ]'
# echo '[ Install Keychain Key Manager For OpenSSH ]'
# S rpm --import http://mirror.ghettoforge.org/distributions/gf/RPM-GPG-KEY-gf.el7
# S rpm -Uvh http://mirror.ghettoforge.org/distributions/gf/gf-release-latest.gf.el7.noarch.rpm
# S yum clean all
# S yum install keychain
# if [ $DEVELOPER_CHOICE == 'yes' ]; then
# echo '[ Check Install, Confirm No Errors; WARNING! MAY TAKE HOURS TO RUN! ]'
# S yum check
# fi
else
C '[ SECURE GIT ON NON-UBUNTU AND NON-CENTOS: Please See Your Operating System Documentation To Install Keychain Key Manager For OpenSSH ]'
fi
echo '[ Enable Keychain ]'
echo '[ NOTE: Do Not Run The Following Step If You Already Copied Your Own Pre-Existing LAMP University .bashrc File In Section 0 ]'
B 'echo -e "\n# SSH Keys; for GitHub, etc.\nif [ -f /usr/bin/keychain ] && [ -f \$HOME/.ssh/id_rsa ]; then\n /usr/bin/keychain \$HOME/.ssh/id_rsa\n source \$HOME/.keychain/\$HOSTNAME-sh\nfi\n" >> ~/.bashrc;'
SOURCE ~/.bashrc
echo '[ How To Enable SSH Key On GitHub... ]'
echo '[ Copy Data Produced By The Next Command ]'
echo '[ Then Browse To https://github.com/settings/ssh ]'
echo "[ Then Click 'Add SSH Key', Paste Copied Key Data, Title '$USERNAME@$HOSTNAME', Click 'Save' ]"
echo
B 'cat ~/.ssh/id_rsa.pub'
echo
C '[ Please Follow The Instructions Above ]'
echo '[ Test SSH Key On GitHub, Enter Passphrase When Prompted, Confirm Automatic Reply Greeting From GitHub Server ]'
B ssh -T git@github.com
echo '[ Configure GitHub Account Setting On Local Machine ]'
echo '[ NOTE: Do Not Repeat The 3 Following git config Steps If You Already Copied Your Own Pre-Existing .gitconfig File In Section 0 ]'
B git config --global user.email "$GITHUB_EMAIL"
B git config --global user.name "$GITHUB_FIRST_NAME $GITHUB_LAST_NAME"
B git config --global core.editor "$EDITOR"
echo '[ Clone (Download) RPerl Repository Onto New Machine ]'
B git clone git@github.com:wbraswell/rperl.git $RPERL_REPO_DIR
elif [ $RPERL_INSTALL_CHOICE == 'g' ] || [ $RPERL_INSTALL_CHOICE == 'github-public-git' ]; then
echo '24g. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, PUBLIC GIT ]]]'
echo '[ If You Want To Upload Code To GitHub, Then You Must Use Secure Git Instead Of Public Git Or Public Zip ]'
echo
D $RPERL_REPO_DIR 'directory where RPerl should be downloaded (different than final RPerl installation directory)' "~/rperl-latest"
RPERL_REPO_DIR=$USER_INPUT
echo '[ Clone (Download) RPerl Repository Onto New Machine ]'
B git clone https://github.com/wbraswell/rperl.git $RPERL_REPO_DIR
elif [ $RPERL_INSTALL_CHOICE == 'h' ] || [ $RPERL_INSTALL_CHOICE == 'github-public-zip' ]; then
echo '24h. [[[ PERL, INSTALL RPERL, LATEST UNSTABLE VIA GITHUB, SINGLE-USER, PUBLIC ZIP ]]]'
echo '[ If You Want To Upload Code To GitHub, Then You Must Use Secure Git Instead Of Public Git Or Public Zip ]'
echo
D $RPERL_REPO_DIR 'directory where RPerl should be downloaded (different than final RPerl installation directory)' "~/rperl-latest"
RPERL_REPO_DIR=$USER_INPUT
echo '[ Download RPerl Repository Onto New Machine ]'
B "wget https://github.com/wbraswell/rperl/archive/master.zip; unzip master.zip; mv rperl-master $RPERL_REPO_DIR; rm master.zip"
else
echo "ERROR: Unrecognized value for RPERL_INSTALL_CHOICE, '${RPERL_INSTALL_CHOICE}', please see '--help' option for valid values"
fi
# avoid duplication of code for building Git options
if [ $RPERL_INSTALL_CHOICE == 'f' ] || [ $RPERL_INSTALL_CHOICE == 'github-secure-git' ] ||
[ $RPERL_INSTALL_CHOICE == 'g' ] || [ $RPERL_INSTALL_CHOICE == 'github-public-git' ] ||
[ $RPERL_INSTALL_CHOICE == 'h' ] || [ $RPERL_INSTALL_CHOICE == 'github-public-zip' ]; then
echo '[ ALL GIT OPTIONS: Install Problematic RPerl Dependency IO::Socket::SSL, Skip Tests ]'
B cpanm -v --notest IO::Socket::SSL
echo '[ ALL GIT OPTIONS: Install Missing Alien::GMP Dependencies ]'
B cpanm -v --notest File::Which FFI::CheckLib Path::Tiny File::chdir Capture::Tiny Alien::GMP
echo '[ ALL GIT OPTIONS: Install RPerl Dependencies Via CPAN ]'
CD $RPERL_REPO_DIR
B "perl Makefile.PL; cpanm -v --notest --installdeps ."
echo '[ ALL GIT OPTIONS: Build RPerl ]'
B make
echo '[ ALL GIT OPTIONS: Test RPerl ]'
B make test
# echo '[ ALL GIT OPTIONS: Test RPerl, Optional Verbose Output ]'
# B 'make test TEST_VERBOSE=1'
echo '[ ALL GIT OPTIONS: Install RPerl ]'
B 'make install'
fi
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
# SECTION 25 VARIABLES
RPERL_VERBOSE='__EMPTY__'
RPERL_DEBUG='__EMPTY__'
RPERL_WARNINGS='__EMPTY__'
RPERL_INSTALL_DIRECTORY='__EMPTY__'
if [ $SECTION_CHOICE -le 25 ]; then
echo '25. [[[ RPERL, RUN COMPILER TESTS ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
D $RPERL_VERBOSE 'RPERL_VERBOSE additional user output, 0 for off, 1 for on' '1'
export RPERL_VERBOSE=$USER_INPUT
D $RPERL_DEBUG 'RPERL_DEBUG additional system output, 0 for off, 1 for on' '1'
export RPERL_DEBUG=$USER_INPUT
D $RPERL_WARNINGS 'RPERL_WARNINGS additional user & system warnings, 0 for off, 1 for on' '0'
export RPERL_WARNINGS=$USER_INPUT
# install directory guessing code copied from pm_location.sh, w/ addition of substr() to strip trailing '/RPerl.pm'
RPERL_INSTALL_DIRECTORY_GUESS=`export RPERL_DEBUG=0; RPERL_VERBOSE=0; perl -e 'use RPerl; my $s = q{RPerl}; $s =~ s/::/\//g; $s .= q{.pm}; print (substr $INC{$s}, 0, -9);'`
D $RPERL_INSTALL_DIRECTORY 'directory where RPerl is currently installed (include trailing "/lib" directory if present)' $RPERL_INSTALL_DIRECTORY_GUESS
RPERL_INSTALL_DIRECTORY=$USER_INPUT
echo '[ These RPerl Test Commands Must Be Executed From Within The RPerl Installation Directory ]'
CD $RPERL_INSTALL_DIRECTORY
echo '[ Display RPerl Command Usage, Ensure RPerl Command Is Properly Functioning ]'
B rperl -?
echo '[ Test Command Sequence #1, OO Inheritance Test: Clean Pre-Existing Compiled Files ]'
B rperl -uu RPerl/Algorithm/Sort/Bubble.pm
# B rm -Rf _Inline lib/RPerl/Algorithm.pmc lib/RPerl/Algorithm.h lib/RPerl/Algorithm.cpp lib/RPerl/Algorithm/Sort.pmc lib/RPerl/Algorithm/Sort.h lib/RPerl/Algorithm/Sort.cpp lib/RPerl/Algorithm/Sort/Bubble.pmc lib/RPerl/Algorithm/Sort/Bubble.h lib/RPerl/Algorithm/Sort/Bubble.cpp
RPERL_CODE='use RPerl::Algorithm::Sort::Bubble; my $o = RPerl::Algorithm::Sort::Bubble->new(); $o->inherited_Bubble("logan"); $o->inherited_Sort("wolvie"); $o->inherited_Algorithm("claws");'
echo '[ Test Command Sequence #1, OO Inheritance Test: Zero Of Three Files Are Compiled, Output Should Be PERLOPS_PERLTYPES, PERLOPS_PERLTYPES, PERLOPS_PERLTYPES ]'
B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #1, OO Inheritance Test: Compile First Of Three Files ]'
B rperl RPerl/Algorithm.pm
echo '[ Test Command Sequence #1, OO Inheritance Test: One Of Three Files Are Compiled, Output Should Be PERLOPS_PERLTYPES, PERLOPS_PERLTYPES, CPPOPS_CPPTYPES ]'
B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #1, OO Inheritance Test: Uncompile First Of Three Files ]'
B rperl -u RPerl/Algorithm.pm
echo '[ Test Command Sequence #1, OO Inheritance Test: Compile Second Of Three Files ]'
B rperl RPerl/Algorithm/Sort.pm
echo '[ Test Command Sequence #1, OO Inheritance Test: Two Of Three Files Are Compiled, Output Should Be PERLOPS_PERLTYPES, CPPOPS_CPPTYPES, CPPOPS_CPPTYPES ]'
B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #1, OO Inheritance Test: Uncompile Second Of Three Files ]'
B rperl -u RPerl/Algorithm/Sort.pm
echo '[ Test Command Sequence #1, OO Inheritance Test: Compile Third Of Three Files ]'
B rperl RPerl/Algorithm/Sort/Bubble.pm
echo '[ Test Command Sequence #1, OO Inheritance Test: All Three Files Are Compiled, Output Should Be CPPOPS_CPPTYPES, CPPOPS_CPPTYPES, CPPOPS_CPPTYPES ]'
B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #1, OO Inheritance Test: Uncompile Third Of Three Files ]'
B rperl -u RPerl/Algorithm/Sort/Bubble.pm
echo '[ Test Command Sequence #2, OO Bubble Sort Timing Test: Clean New or Pre-Existing Compiled Files ]'
B rperl -uu RPerl/Algorithm/Sort/Bubble.pm
# B rm -Rf _Inline lib/RPerl/Algorithm.pmc lib/RPerl/Algorithm.h lib/RPerl/Algorithm.cpp lib/RPerl/Algorithm/Sort.pmc lib/RPerl/Algorithm/Sort.h lib/RPerl/Algorithm/Sort.cpp lib/RPerl/Algorithm/Sort/Bubble.pmc lib/RPerl/Algorithm/Sort/Bubble.h lib/RPerl/Algorithm/Sort/Bubble.cpp
# B ./script/demo/unlink_bubble.sh
RPERL_CODE='use RPerl::Algorithm::Sort::Bubble; my $a = [reverse 0 .. 5000]; use Time::HiRes qw(time); my $start = time; my $s = RPerl::Algorithm::Sort::Bubble::integer_bubblesort($a); my $elapsed = time - $start; print Dumper($s); print "elapsed: " . $elapsed . "\n";'
echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Slow Uncompiled PERLOPS_PERLTYPES Mode, 13 Seconds For 5_000 Elements ]'
B "perl -e '$RPERL_CODE'"
# NEED FIX: re-enable CPPOS_PERLTYPES manually-compiled files, crashing w/ GCC compiler errors
# NEED FIX: re-enable CPPOS_PERLTYPES manually-compiled files, crashing w/ GCC compiler errors
# NEED FIX: re-enable CPPOS_PERLTYPES manually-compiled files, crashing w/ GCC compiler errors
# echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Fast Manually Compiled CPPOPS_PERLTYPES Mode, Link Files IF GITHUB REPO ONLY ]'
# B ../script/demo/link_bubble_CPPOPS_PERLTYPES.sh
# echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Fast Manually Compiled CPPOPS_PERLTYPES Mode, 1.5 Seconds For 5_000 Elements ]'
# B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Clean New Compiled Files ]'
B rperl -u RPerl/Algorithm/Sort/Bubble.pm
# B ./script/demo/unlink_bubble.sh
echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Super Fast Automatically Compiled CPPOPS_CPPTYPES Mode, Compile Files ]'
B rperl RPerl/Algorithm/Sort/Bubble.pm
echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Super Fast Automatically Compiled CPPOPS_CPPTYPES Mode, 0.05 Seconds For 5_000 Elements ]'
B "perl -e '$RPERL_CODE'"
echo '[ Test Command Sequence #2, Bubble Sort Timing Test: Super Fast Automatically Compiled CPPOPS_CPPTYPES Mode, Uncompile Files ]'
B rperl -u RPerl/Algorithm/Sort/Bubble.pm
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
# SECTION 26 VARIABLES
PHYSICSPERL_DOWNLOAD_DIRECTORY='__EMPTY__'
#PHYSICSPERL_INSTALL_DIRECTORY='__EMPTY__'
PHYSICSPERL_NBODY_STEPS='__EMPTY__'
PHYSICSPERL_ENABLE_GRAPHICS='__EMPTY__'
if [ $SECTION_CHOICE -le 26 ]; then
echo '26. [[[ RPERL, INSTALL RPERL APPS & RUN DEMOS ]]]'
echo
if [ $MACHINE_CHOICE == '0' ] || [ $MACHINE_CHOICE == 'new' ]; then
D $RPERL_VERBOSE 'RPERL_VERBOSE additional user output, 0 for off, 1 for on' '1'
export RPERL_VERBOSE=$USER_INPUT
D $RPERL_DEBUG 'RPERL_DEBUG additional system output, 0 for off, 1 for on' '1'
export RPERL_DEBUG=$USER_INPUT
D $RPERL_WARNINGS 'RPERL_WARNINGS additional user & system warnings, 0 for off, 1 for on' '0'
export RPERL_WARNINGS=$USER_INPUT
D $PHYSICSPERL_DOWNLOAD_DIRECTORY 'directory where PhysicsPerl is to be downloaded (different than final PhysicsPerl installation directory; do NOT include trailing "/lib" directory)' "~/physicsperl-latest" "~/repos_github/physicsperl-latest"
PHYSICSPERL_DOWNLOAD_DIRECTORY=$USER_INPUT
# NEED UPGRADE: support installation of PhysicsPerl, not just download; must be able to find & run `script/demo/n_body.pl`
# D $PHYSICSPERL_INSTALL_DIRECTORY 'directory where PhysicsPerl is to be installed or is already installed (DO include trailing "/lib" directory if present)' "~/physicsperl-latest/lib" "~/perl5/lib/perl5" "~/repos_github/physicsperl-latest/lib"
# PHYSICSPERL_INSTALL_DIRECTORY=$USER_INPUT
D $PHYSICSPERL_NBODY_STEPS 'number of PhysicsPerl N-Body steps to complete (more steps is longer runtime)' '100_000'
PHYSICSPERL_NBODY_STEPS=$USER_INPUT
D $PHYSICSPERL_ENABLE_GRAPHICS 'enabling of PhysicsPerl graphics, 0 for off, 1 for on' '0'
PHYSICSPERL_ENABLE_GRAPHICS=$USER_INPUT
PHYSICSPERL_ENABLE_SSE='__EMPTY__'
# DEV NOTE: PATH & PERL5LIB may already be set via LAMP University Run Commands .bashrc, but temporarily modify anyway just in case
PATH=script:$PATH
PERL5LIB=lib:$PERL5LIB
# NEED UPDATE: add option to install PhysicsPerl via CPAN
echo '[ Install Latest Unstable PhysicsPerl Via Public Github ]'
B "wget https://github.com/wbraswell/physicsperl/archive/master.zip; unzip master.zip; mv physicsperl-master ${PHYSICSPERL_DOWNLOAD_DIRECTORY}; rm -rf master.zip"
CD $PHYSICSPERL_DOWNLOAD_DIRECTORY
echo
echo '[ Install PhysicsPerl Dependencies Via CPAN ]'
B cpanm -v --notest --installdeps .
# echo '[ Build & Install PhysicsPerl ]'
# B 'perl Makefile.PL; make; make test; make install'
# CD $PHYSICSPERL_INSTALL_DIRECTORY
PHYSICSPERL_ENABLE_SSE=1
echo '[ Test Command Sequence #0a, PhysicsPerl N-Body Timing Test: Clean Pre-Existing Compiled Files ]'
B rperl -uu lib/PhysicsPerl/Astro/SystemSSE.pm
# B script/demo/unlink_astro.sh # prefer functionally equivalent `rperl -u` for uniformity & professionalism
echo '[ Test Command Sequence #0a, PhysicsPerl N-Body Timing Test: Super Slow Uncompiled PERLOPS_PERLTYPES_SSE Mode, 345 Seconds For 100K Steps & 4109 Seconds (68 Minutes) For 1M Steps Without Graphics ]'
echo '[ NOTE: This Test Could Take SEVERAL HOURS OR DAYS To Run!!! ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
PHYSICSPERL_ENABLE_SSE=0
echo '[ Test Command Sequence #0b, PhysicsPerl N-Body Timing Test: Clean Pre-Existing Compiled Files ]'
B rperl -u lib/PhysicsPerl/Astro/System.pm
echo '[ Test Command Sequence #0b, PhysicsPerl N-Body Timing Test: Slow Uncompiled PERLOPS_PERLTYPES Mode, 20 Seconds For 100K Steps & 200 Seconds For 1M Steps Without Graphics ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
PHYSICSPERL_ENABLE_SSE=0
echo '[ Test Command Sequence #0c, PhysicsPerl N-Body Timing Test: Clean New Compiled Files ]'
B rperl -u lib/PhysicsPerl/Astro/System.pm
echo '[ Test Command Sequence #0c, PhysicsPerl N-Body Timing Test: Super Fast Manually Compiled CPPOPS_CPPTYPES Mode, Link Files ]'
B script/demo/link_astro_CPPOPS_CPPTYPES.sh
echo '[ Test Command Sequence #0c, PhysicsPerl N-Body Timing Test: Super Fast Manually Compiled CPPOPS_CPPTYPES Mode, 0.7 Seconds For 100K Steps & 7 Seconds For 1M Steps Without Graphics ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
PHYSICSPERL_ENABLE_SSE=1
echo '[ Test Command Sequence #0d, PhysicsPerl N-Body Timing Test: Clean New Compiled Files ]'
B rperl -u lib/PhysicsPerl/Astro/SystemSSE.pm
echo '[ Test Command Sequence #0d, PhysicsPerl N-Body Timing Test: Ultra Fast Manually Compiled CPPOPS_CPPTYPES_SSE Mode, Link Files ]'
B script/demo/link_astro_CPPOPS_CPPTYPES_SSE.sh
echo '[ Test Command Sequence #0d, PhysicsPerl N-Body Timing Test: Ultra Fast Manually Compiled CPPOPS_CPPTYPES_SSE Mode, 0.12 Seconds For 100K Steps & 1.2 Seconds For 1M Steps Without Graphics ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
PHYSICSPERL_ENABLE_SSE=0
echo '[ Test Command Sequence #0e, PhysicsPerl N-Body Timing Test: Clean New Compiled Files ]'
B rperl -uu lib/PhysicsPerl/Astro/System.pm
echo '[ Test Command Sequence #0e, PhysicsPerl N-Body Timing Test: Super Fast Automatically Compiled CPPOPS_CPPTYPES Mode, Compile Files ]'
B rperl lib/PhysicsPerl/Astro/System.pm
echo '[ Test Command Sequence #0e, PhysicsPerl N-Body Timing Test: Super Fast Automatically Compiled CPPOPS_CPPTYPES Mode, 0.7 Seconds For 100K Steps & 7 Seconds For 1M Steps Without Graphics ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
PHYSICSPERL_ENABLE_SSE=1
echo '[ Test Command Sequence #0f, PhysicsPerl N-Body Timing Test: Clean New Compiled Files ]'
B rperl -u lib/PhysicsPerl/Astro/SystemSSE.pm
echo '[ Test Command Sequence #0f, PhysicsPerl N-Body Timing Test: Ultra Fast Automatically Compiled CPPOPS_CPPTYPES_SSE Mode, Compile Files ]'
B rperl lib/PhysicsPerl/Astro/SystemSSE.pm
echo '[ Test Command Sequence #0f, PhysicsPerl N-Body Timing Test: Ultra Fast Automatically Compiled CPPOPS_CPPTYPES_SSE Mode, 0.12 Seconds for 100K Steps & 1.2 Seconds For 1M Steps Without Graphics ]'
B script/demo/n_body.pl $PHYSICSPERL_NBODY_STEPS $PHYSICSPERL_ENABLE_GRAPHICS $PHYSICSPERL_ENABLE_SSE
elif [ $MACHINE_CHOICE == '1' ] || [ $MACHINE_CHOICE == 'existing' ]; then
echo "Nothing To Do On Existing Machine!"
fi
CURRENT_SECTION_COMPLETE
fi
echo
echo '[[[ ALL DONE!!! ]]]'
echo