/ 
WWW-FreeProxyListsCom-1.006
River stage one • 2 direct dependents • 3 total dependents
/ WWW::FreeProxyListsCom

NAME

WWW::FreeProxyListsCom - Fetch proxy lists from http://www.freeproxylists.com

Coverage Status

SYNOPSIS

use strict;
use warnings;

use WWW::FreeProxyListsCom;

my $fpl = WWW::FreeProxyListsCom->new;

my $proxy_list = $fpl->get_list or die $prox->error;

$proxy_list = $fpl->filter(type => 'is_https');

my $formatted_into_urls = $fpl->urls;

DESCRIPTION

The module provides interface to fetch proxy server lists from http://www.freeproxylists.com/

CONSTRUCTOR

new

my $fpl = WWW::FreeProxyListCom->new;

my $fpl2 = WWW::FreeProxyListCom->new(
    timeout => 20, # or 'mech'
    mech    => WWW::Mechanize->new(agent => 'foos', timeout => 20),
    debug   => 1
);

Bakes up and returns a fresh WWW::FreeProxyListCom object. Takes a few arguments, all of which are optional. Possible arguments are as follows:

timeout

my $fpl = WWW::FreeProxyListCom->new(timeout => 10);

Takes a scalar as a value which is the value that will be passed to the WWW::Mechanize object to indicate connection timeout in seconds. Defaults to: 30 seconds.

mech

my $fpl = WWW::FreeProxyListCom->new(
    mech => WWW::Mechanize->new(agent => '007', timeout => 10),
);

If a simple timeout is not enough for your needs feel free to specify the mech argument which takes a WWW::Mechanize object as a value. Defaults to: plain WWW::Mechanize object with timeout argument set to whatever WWW::FreeProxyListCom's timeout argument is set to as well as agent argument is set to mimic FireFox.

debug

my $fpl = WWW::FreeProxyListCom->new(debug => 1);

When set to a true value will make the object print out some debugging info. Defaults to: 0

METHODS

get_list

my $proxy_list = $fpl->get_list or die $fpl->error;

my $fpl2 = $fpl->get_list(
    type      => 'standard',
    max_pages => 5,
) or die $fpl->error;

Instructs the object ot fetch a list of proxies from http://www.freeproxylists.com/ website. On failure returns either undef or an empty list depending on the context and the reason for failure will be available via error() method. Note: if request for a each of the "list" (see max_pages argument below) fails the get_list() will NOT error out, if you are getting empty proxy lists try setting debug option on in the constructor and it will carp() any failures on the "list" gets. On success returns an arrayref of hashrefs, see RETURN VALUE section below for details. Takes several arguments all of which are optional. To understand them better you should visit http://www.freeproxylists.com/ first. The possible arguments are as follows:

type

type => $string

Optional. Specifies the list of proxies to fetch. Defaults to: elite. Possible arguments are as follows. Note all are plain HTTP except socks and https.

elite           = Elite (hides you entirely)
anonymous       = Anonymous (hides you, but shows you're using a proxy)
non_anonymous   = non-anonymous (no masking at all)
https           = HTTPS (SSL enabled, may not hide you)
standard        = standard HTTP/HTTPS/SOCKS/Proxy ports (may not hide you)
ca              = Canada
fr              = France
us              = United States
uk              = United Kingdom
socks           = SOCKS (version 4/5)

max_pages

max_pages => $int

Optional. Specifies how many "lists" to fetch. In other words, if you go to list section titled "http elite proxies" you'll see several lists in the table; the max_pages specifies how many of those lists to fetch. If max_pages is larger than the number of available lists only the number of available lists will be fetched. A special value of 0 indicates that the object should fetch all available lists for a specified type. Defaults to: 1 (which is more than enough).

RETURN VALUE

$VAR1 = [
    {
        'country' => 'China',
        'last_test' => '3/15 4:23:14 pm',
        'ip' => '121.15.200.147',
        'latency' => '5115',
        'port' => '80',
        'is_https' => 'true'
    },
]

On success get_list() method returns a (possibly empty) arrayref of "proxy" hashrefs. The hashrefs represent each proxy listed on the proxy list on the site. Each will contain the following keys (if the value for a specific key was not found on the site it will be set to N/A):

ip

The IP address of the proxy

port

The port of the proxy

country

The country of the proxy

last_test

When was the proxy last tested to be alive, this is the "Date checked, UTC" column on the site.

latency

Corresponds to the "Latency" column on the site

is_https

Corresponds to "HTTPS" column on the site.

filter

my $filtered_list = $fpl->filter(
    port        => 80,
    ip          => qr/^120/,
    country     => 'Russia',
    is_https    => 'true',
    last_test   => qr|^3/15|, # march 15's
    latency     => qr/\d{1,2}/,
);

Must be called after a successfull call to get_list() will croak otherwise. Takes one or more key/value pairs of arguments which specify filtering rule. The keys are the same as the keys of "proxy" hashref in the return value of the get_list() method. Values can be either simple scalars or regexes (qr//). If value is a regex the corresponding value in the "proxy" hashref will matched against the regex, otherwise the eq will be done. Returns an arrayref of "proxy" hashrefs in the exact same format as get_list() returns except filtered. In other words calling $prox->filter( port => 80, latency => qr/\d{1,2}/ ) will return only proxies with port number 80 and for which latency is a two digit value. On failure returns either undef or an empty list depending on the context and the reason for the error will be available via error() method. Although, filter() should not fail if you pass proper filter arguments and call it after successfull get_list().

error

my $proxy_list = $fpl->get_list
    or die $fpl->error;

When either get_list() or filter() methods fail they will return either undef or an empty list depending on the context and the reason for the failure will be available via error() method. Takes no arguments, returns a human parsable message explaining why get_list() or filter() failed.

urls

my $proxy_urls = $fpl->urls;

Must be called after a successful call to get_list(). Takes no arguments, returns an array reference of proxies. Each element is a string, in the following format: https://ip_address:port.

mech

my $old_mech = $fpl->mech;

$fpl->mech(WWW::Mechanize->new(agent => 'blah'));

Returns a WWW::Mechanize object used for fetching proxy lists. When called with an optional argument (which must be a WWW::Mechanize object) will use it in any subsequent get_list() calls.

list

my $cached_proxy_list = $fpl->list;

Must be called after a successfull call to get_list(). Takes no arugments, returns the same arrayref of hashrefs last call to get_list() returned.

filtered_list

my $cached_filtered_proxy_list = $fpl->filtered_list;

Must be called after a successfull call to filter(). Takes no arugments, returns the same arrayref of hashrefs last call to filter() returned.

debug

my $old_debug = $fpl->debug;

$fpl->debug(1);

Returns a currently set debug flag (see debug argument to constructor). When called with an argument will set the debug flag to the value specified.

debug_list

my $cached_urls = $fpl->url_list;

Returns the same list after the last successful call to urls() without the module re-processing the proxies that were acquired in the previous call to get_list().

AUTHOR

Zoffix Znet, <zoffix at cpan.org> (http://zoffix.com, http://haslayout.net)

Adopted on Feb 4, 2016 and currently maintained by:

Steve Bertrand <steveb at cpan.org>

BUGS

Please report any bugs or feature requests to https://github.com/stevieb9/p5-www-freeproxylistscom/issues.

COPYRIGHT & LICENSE

Copyright 2016, 2018 Steve Bertrand

Copyright 2008 Zoffix Znet, all rights reserved.

This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License.

See http://dev.perl.org/licenses/ for more information.