Deprecated.

The maintainer of this distribution has indicated that it is deprecated and no longer suitable for use.

NAME

Archive::Libarchive::FFI::Function - libarchive function reference

VERSION

version 0.0902

SYNOPSIS

use Archive::Libarchive::FFI qw( :func );

DESCRIPTION

This is the function reference for the Perl bindings to libarchive.

This document provides example calls to each function with argument and return value variable names that infer their types. Functions that take multiple arguments or return multiple values of the same type will use numbered suffixes to distinguish them (example: $archive1, $archive2).

$archive

An archive object identifier (actually a pointer to the C structure used by libarchive as the archive object).

These are created with archive_read_new, archive_write_new or archive_write_disk_new and deleted with archive_read_free or archive_write_free.

$entry

An archive entry identifier (actually a pointer to the C structure used by libarchive as the archive entry object).

These are created with archive_entry_new and deleted with archive_entry_free. They can also be returned by archive_read_next_header, but in that case libarchive will handle the allocation and freeing of resources for the entry.

$status

Integer value indicating the success or failure of an operation. Most functions use this as their return value. This value may be compared to any of these constants:

ARCHIVE_OK: Operation was successful
ARCHIVE_EOF: Fond end of archive
ARCHIVE_RETRY: Retry might succeed
ARCHIVE_WARN: Partial success
ARCHIVE_FAILED: Current operation cannot complete
ARCHIVE_FATAL: No more operations are possible

(There are additional non-status code constants provided by libarchive, see Archive::Libarchive::FFI::Constant for a full listing).

$count_or_status

Returns the number of bytes read/written on success (or 0 at EOF), returns a negative status value (see $status above) on error or warning.

$callback

A code reference pointing to a Perl callback subroutine. The arguments that are passed into the callback and the return values expected from the callback are documented in Archive::Libarchive::FFI::Callback.

$string

A plain string scalar value.

$bool

A boolean value, either 0 or 1 (probably not undef for return values).

If you are linking against an older version of libarchive, some of these functions may not be available. You can use the can method to test if a function or constant is available, for example:

if(Archive::Libarchive::FFI->can('archive_read_support_filter_grzip')
{
  # grzip filter is available.
}

Functions with the prefix archive_perl_ are not part of libarchive and are provided with this module for perl specific needs when operating with the library.

FUNCTIONS

archive_clear_error

my $status = archive_clear_error($archive);

Clears any error information left over from a previous call Not generally used in client code. Does not return a value.

archive_copy_error

my $status = archive_copy_error($archive1, $archive2);

Copies error information from one archive to another.

archive_entry_acl

my $acl = archive_entry_acl($entry);

Return an opaque ACL object.

There's not yet anything you can actually do with this...

archive_entry_acl_add_entry

my $status = archive_entry_acl_add_entry($entry, $type, $permset, $tag, $qual, $name);

Adds a single ACL entry. For the access ACL and non-extended principals, the classic UNIX permissions are updated.

archive_entry_acl_clear

my $status = archive_entry_acl_clear($entry);

removes all ACL entries and resets the enumeration pointer.

archive_entry_acl_count

my $count = archive_entry_acl_count($entry, $want_type);

counts the ACL entries that have the given type mask. $type can be the bitwise-or of ARCHIVE_ENTRY_ACL_TYPE_ACCESS and ARCHIVE_ENTRY_ACL_TYPE_DEFAULT. If ARCHIVE_ENTRY_ACL_TYPE_ACCESS is included and at least one extended ACL entry is found, the three non-extended ACLs are added.

archive_entry_acl_next

my $status = archive_entry_acl_next($entry, $want_type, $type, $permset, $tag, $qual, $name);

return the next entry of the ACL list. This functions may only be called after archive_entry_acl_reset has indicated the presence of extended ACL entries.

archive_entry_acl_reset

my $status = archive_entry_acl_reset($entry, $want_type);

prepare reading the list of ACL entries with archive_entry_acl_next or archive_entry_acl_next_w. The function returns either 0, if no non-extended ACLs are found. In this case, the access permissions should be obtained by archive_entry_mode or set using chmod. Otherwise, the function returns the same value as archive_entry_acl_count.

archive_entry_acl_text

my $string = archive_entry_acl_text($entry, $flags);

converts the ACL entries for the given type mask into a string. In addition to the normal type flags, ARCHIVE_ENTRY_ACL_STYLE_EXTRA_ID and ARCHIVE_ENTRY_ACL_STYLE_MARK_DEFAULT can be specified to further customize the result. The returned long string is valid until the next call to archive_entry_acl_clear, archive_entry_acl_add_entry, archive_entry_acl_text.

archive_entry_atime

my $atime = archive_entry_atime($entry);

Returns the access time property for the archive entry.

archive_entry_atime_is_set

my $bool = archive_entry_atime_is_set($entry);

Returns true if the access time property has been set on the archive entry.

archive_entry_atime_nsec

my $atime = archive_entry_atime_nsec($entry);

Returns the access time (nanoseconds).

archive_entry_birthtime

my $birthtime = archive_entry_birthtime($entry);

Returns the birthtime (creation time) for the archive entry.

archive_entry_birthtime_is_set

my $bool = archive_entry_birthtime_is_set($entry);

Returns true if the birthtime (creation time) property has been set on the archive entry.

archive_entry_birthtime_nsec

my $birthtime = archive_entry_birthtime_nsec($entry);

Returns the birthtime (creation time) for the archive entry.

archive_entry_clear

my $status = archive_entry_clear($entry);

Erases the object, resetting all internal fields to the same state as a newly-created object. This is provided to allow you to quickly recycle objects without thrashing the heap.

archive_entry_clone

my $entry1 = archive_entry_clone($entry2);

A deep copy operation; all text fields are duplicated.

archive_entry_copy_fflags_text

my $status = archive_entry_copy_fflags_text($entry, $string);

Sets the fflags_text property for the archive entry object.

This is an alias for archive_entry_set_fflags_text.

archive_entry_copy_mac_metadata

An Alias for archive_entry_set_mac_metadata.

archive_entry_copy_sourcepath

my $status = archive_entry_set_sourcepath($entry, $sourcepath);

Sets the sourcepath property for the archive entry object.

This is an alias for archive_entry_set_sourcepath.

archive_entry_copy_stat

my $status = archive_entry_stat($entry, $dev, $ino, $mode, $nlink, $uid, $gid, $rdev, $atime, $mtime, $ctime);

Converts the various fields in the format used by stat to the fields store in the archive entry.

The fields $blksize, $blocks supported by stat, are not supported by this function.

This is an alias for archive_entry_set_stat.

archive_entry_ctime

my $ctime = archive_entry_ctime($entry);

Returns the ctime (last time an inode property was changed) property for the archive entry.

archive_entry_ctime_is_set

my $bool = archive_entry_ctime_is_set($entry);

Returns true if the ctime (last time an inode property was changed) property has been set on the archive entry.

archive_entry_ctime_nsec

my $ctime = archive_entry_ctime_nsec($entry);

Returns the ctime (last time an inode property was changed) property (nanoseconds).

archive_entry_dev

my $device = archive_entry_dev($entry);

Returns the device property for the archive entry.

The device property is an integer identifying the device, and is used by archive_entry_linkify (along with the ino64 property) to find hardlinks.

archive_entry_dev_is_set

my $bool = archive_entry_dev_is_set($entry);

Returns true if the device property on the archive entry is set.

The device property is an integer identifying the device, and is used by archive_entry_linkify (along with the ino64 property) to find hardlinks.

archive_entry_devmajor

my $device_major = archive_entry_devmajor($entry);

Returns the device major property for the archive entry.

archive_entry_devminor

my $device_minor = archive_entry_devminor($entry);

Returns the device minor property for the archive entry.

archive_entry_fflags

my $status = archive_entry_fflags($entry, $set, $clear);

Gets the file flag properties for the archive entry. The $set and $clear arguments are updated to return their values.

archive_entry_fflags_text($entry)

my $string = archive_entry_fflags_text($entry);

Returns the file flags property as a string.

archive_entry_filetype

my $code = archive_entry_filetype($entry);

Gets the filetype of the archive entry. Code should be one of

AE_IFMT
AE_IFREG
AE_IFLNK
AE_IFSOCK
AE_IFCHR
AE_IFBLK
AE_IFDIR
AE_IFIFO

archive_entry_free

my $status = archive_entry_free($entry);

Releases the struct archive_entry object.

archive_entry_gid

my $gid = archive_entry_gid($entry);

Returns the group id property for the archive entry.

archive_entry_gname

my $string = archive_entry_gname($entry);

Retrieve the gname for the archive entry object.

archive_entry_hardlink

my $string = archive_entry_hardlink($entry);

Retrieve the hardlink for the archive entry object.

archive_entry_ino

my $ino = archive_entry_ino($entry);

Get the inode property for the entry.

The inode property is an integer identifying the file within a filesystem and is used by archive_entry_linkify (along with the dev property) to find hardlinks.

This actually uses the libarchive archive_entry_set_ino64 function (in libarchive archive_entry_set_ino is a legacy interface).

archive_entry_ino_is_set

my $bool = archive_entry_ino_is_set($entry);

Returns true if the inode property for the entry has been set.

archive_entry_linkify

my $status = archive_entry_linkify($linkresolver, $entry1, $entry2)

Behavior depends on the link resolver strategy (archive_entry_linkresolver_set_strategy). See libarchive documentation (archive_entry_linkify(3)) for details.

Note that $entry1 and $entry2 are passed by value and may be changed or set to undef after this function is called.

archive_entry_linkresolver_free

my $status = archive_entry_linkresolver_free($linkresolver);

Deallocates a link resolver instance. All deferred entries are flushed and the internal storage is freed.

archive_entry_linkresolver_new

my $linkresolver = archive_entry_linkresolver_new();

Allocate a new link resolver.

archive_entry_linkresolver_set_strategy

my $status = archive_entry_linkresolver_set_strategy($linkresolver, $format);

Set the link resolver strategy. $format should be an archive format constant (a constant with ARCHIVE_FORMAT_ prefix see Archive::Libarchive::FFI::Constant.

archive_entry_mac_metadata

my $buffer = archive_entry_mac_metadata($entry);

The mac_metadata property is Storage for Mac OS-specific AppleDouble metadata information. Apple-format tar files store a separate binary blob containing encoded metadata with ACL, extended attributes, etc. This provides a place to store that blob.

This method gets the blob. The C name for this function is archive_entry_copy_mac_metadata.

archive_entry_mode

my $mode = archive_entry_mode($entry);

Get a combination of file type and permission and provide the equivalent of st_mode. use of archive_entry_filetype and archive_entry_perm for getting and archive_entry_set_filetype and archive_entry_set_perm for setting is recommended.

archive_entry_mtime

my $mtime = archive_entry_mtime($entry);

Gets the mtime (modify time) property for the archive entry.

archive_entry_mtime_is_set

my $bool = archive_entry_mtime_is_set($entry);

Returns true if the mtime (modify time) property has been set on the archive entry.

archive_entry_mtime_nsec

my $mtime = archive_entry_mtime_nsec($entry);

Gets the mtime property (modify time) property for the archive entry (nanoseconds).

archive_entry_new

my $entry = archive_entry_new();

Allocate and return a blank struct archive_entry object.

archive_entry_new2

my $entry = archive_entry_new2($archive)

This form of archive_entry_new2 will pull character-set conversion information from the specified archive handle. The older archive_entry_new form will result in the use of an internal default character-set conversion.

archive_entry_nlink

my $nlink = archive_entry_nlink($entry);

Gets the number of hardlinks for the entry.

archive_entry_pathname

my $string = archive_entry_pathname($entry);

Retrieve the pathname for the archive entry object.

archive_entry_perm

my $perm = archive_entry_perm($entry);

Get the permission bits for the entry. This is the usual UNIX octal permission thing.

archive_entry_rdev

my $device = archive_entry_rdev($entry);

Returns the rdev property for the archive entry.

archive_entry_rdevmajor

my $device_major = archive_entry_rdevmajor($entry);

Returns the major component of the rdev property for the archive entry.

archive_entry_rdevminor

my $device_minor = archive_entry_rdevminor($entry);

Returns the minor component of the rdev property for the archive entry.

archive_entry_set_atime

my $status = archive_entry_set_atime($entry, $atime, $nsec);

Sets the access time property for the archive entry.

archive_entry_set_birthtime

my $status = archive_entry_set_birthtime($entry, $birthtime, $nsec);

Sets the birthtime (creation time) for the archive entry.

archive_entry_set_ctime

my $status = archive_entry_set_ctime($entry, $ctime, $nsec);

Sets the ctime (last time an inode property was changed) property for the archive entry.

archive_entry_set_dev

my $status = archive_entry_set_dev($entry, $device);

Sets the device property for the archive entry.

The device property is an integer identifying the device, and is used by archive_entry_linkify (along with the ino64 property) to find hardlinks.

archive_entry_set_devmajor

my $status = archive_entry_set_devmajor($entry, $devmajor);

Sets the device major property for the archive entry.

The device property is an integer identifying the device, and is used by archive_entry_linkify (along with the ino64 property) to find hardlinks.

archive_entry_set_devminor

my $status = archive_entry_set_devminor($entry, $devminor);

Sets the device minor property for the archive entry.

The device property is an integer identifying the device, and is used by archive_entry_linkify (along with the ino64 property) to find hardlinks.

archive_entry_set_fflags

my $status = archive_entry_set_fflags($entry, $set, $clear);

Sets the file flag properties for the archive entry.

archive_entry_set_fflags_text

my $status = archive_entry_set_fflags_text($entry, $string);

Sets the fflags_text property for the archive entry object.

archive_entry_set_filetype

my $status = archive_entry_set_filetype($entry, $code);

Sets the filetype of the archive entry. Code should be one of

AE_IFMT
AE_IFREG
AE_IFLNK
AE_IFSOCK
AE_IFCHR
AE_IFBLK
AE_IFDIR
AE_IFIFO

archive_entry_set_gid

my $status = archive_entry_set_gid($gid).

Sets the group id property for the archive entry.

archive_entry_set_gname

my $status = archive_entry_set_gname($entry, $string)

Sets the gname for the archive entry object.

archive_entry_set_hardlink

my $status = archive_entry_set_hardlink($entry, $string)

Sets the hardlink for the archive entry object.

archive_entry_set_ino

my $status = archive_entry_set_ino($entry, $ino);

Set the inode property for the entry.

The inode property is an integer identifying the file within a filesystem and is used by archive_entry_linkify (along with the dev property) to find hardlinks.

This actually uses the libarchive archive_entry_set_ino64 function (in libarchive archive_entry_set_ino is a legacy interface).

archive_entry_set_link

my $status = archive_entry_set_link($entry, $string);

Set symlink if symlink is already set, else set hardlink.

archive_entry_set_mac_metadata

my $status = archive_entry_set_mac_metadata($entry, $buffer);

This method sets the blob. The C name for this function is archive_entry_copy_mac_metadata.

archive_entry_set_mode

my $status = archive_entry_set_mode($entry, $mode);

Set a combination of file type and permission and provide the equivalent of st_mode. use of archive_entry_filetype and archive_entry_perm for getting and archive_entry_set_filetype and archive_entry_set_perm for setting is recommended.

archive_entry_set_mtime

my $status = archive_entry_set_mtime($entry, $sec, $nanosec);

Set the mtime (modify time) for the entry object.

archive_entry_set_nlink

my $status = archive_entry_set_nlink($entry, $nlink);

Sets the number of hardlinks for the entry.

archive_entry_set_pathname

my $status = archive_entry_set_pathname($entry, $string)

Sets the pathname for the archive entry object.

archive_entry_set_perm

my $status = archive_entry_set_perm($entry, $perm);

Set the permission bits for the entry. This is the usual UNIX octal permission thing.

archive_entry_set_rdev

my $status = archive_entry_set_rdev($entry, $device);

Set the rdev property for the archive entry.

archive_entry_set_rdevmajor

my $status = archive_entry_set_rdevmajor($entry, $major);

Set the major component of the rdev property for the archive entry.

archive_entry_set_rdevminor

my $status = archive_entry_set_rdevminor($entry, $minor);

Sets the minor component of the rdev property for the archive entry.

archive_entry_set_size

my $status = archive_entry_set_size($entry, $size);

Sets the size property for the archive entry.

archive_entry_set_sourcepath

my $status = archive_entry_set_sourcepath($entry, $sourcepath);

Sets the sourcepath property for the archive entry object.

archive_entry_set_stat

my $status = archive_entry_stat($entry, $dev, $ino, $mode, $nlink, $uid, $gid, $rdev, $atime, $mtime, $ctime);

Converts the various fields in the format used by stat to the fields store in the archive entry.

The fields $blksize, $blocks supported by stat, are not supported by this function.

archive_entry_set_symlink

my $status = archive_entry_set_symlink($entry, $string)

Sets the symlink for the archive entry object.

archive_entry_set_uid

my $status = archive_entry_set_uid($entry, $uid);

Set the UID (user id) property for the archive entry.

archive_entry_set_uname

my $status = archive_entry_set_uname($entry, $string)

Sets the uname for the archive entry object.

archive_entry_size($entry)

my $size = archive_entry_size($entry);

Returns the size of the entry in bytes.

archive_entry_size_is_set

my $bool = archive_entry_size_is_set($entry)

Returns true if the size property for the archive entry has been set.

archive_entry_sourcepath

my $sourcepath = archive_entry_sourcepath($entry);

Gets the sourcepath property for the archive entry object.

archive_entry_sparse_add_entry

my $status = archive_entry_sparse_add_entry($entry, $offset, $length)

Add a sparse region to the entry.

archive_entry_sparse_clear

my $status = archive_entry_sparse_clear($entry)

Remove all sparse region from the archive entry.

archive_entry_sparse_count

my $count = archive_entry_sparse_count($entry);

Return the number of sparse entries in the entry.

archive_entry_sparse_next

my $status = archive_entry_sparse_next($entry, $offset, $length);

Return the next sparse region for the entry. Example:

archive_entry_sparse_reset($entry);
while(my $r = archive_entry_sparse_next($entry, $offset, $length))
{
  last if $r == ARCHIVE_WARN;
  die archive_error_string($a) if $r < ARCHIVE_OK;
  
  # do something with $name and $value
}

archive_entry_sparse_reset

my $count = archive_entry_sparse_reset($entry);

Reset the internal sparse region iterator for the entry (see archive_entry_sparse_next for an example).

archive_entry_stat

my($dev, $ino, $mode, $nlink, $uid, $gid, $rdev, $atime, $mtime, $ctime) = archive_entry_stat($entry);

Converts the various fields stored in the archive entry to the format used by stat.

The fields $blksize, $blocks supported by stat, are not supported by this function.

archive_entry_strmode

my $strmode = archive_entry_strmode($entry);

Returns a string representation of the archive entry's permission mode, a la the Unix ls command (example: a mode of 0644 should come back as -rw-r--r--.

archive_entry_symlink

my $string = archive_entry_symlink($entry);

Retrieve the symlink for the archive entry object.

archive_entry_uid

my $uid = archive_entry_uid($entry);

Get the UID (user id) property for the archive entry.

archive_entry_uname

my $string = archive_entry_uname($entry);

Retrieve the uname for the archive entry object.

archive_entry_unset_atime

my $status = archive_entry_unset_atime($entry);

Removes the value for the atime property on the archive.

archive_entry_unset_birthtime

my $status = archive_entry_unset_birthtime($entry);

Unset the birthtime (creation time) property for the archive entry.

archive_entry_unset_ctime

my $status = archive_entry_set_ctime($entry);

Unsets the ctime (last time an inode property was changed) property for the archive entry.

archive_entry_unset_mtime

my $status = archive_entry_unset_mtime($entry);

Unset the mtime (modify time) for the entry object.

archive_entry_unset_size

my $status = archive_entry_unset_size($entry);

Unsets the size property for the archive entry.

archive_entry_xattr_add_entry

my $status = archive_entry_xattr_add_entry($entry, $name, $buffer);

Add an extended attribute (xattr) to the archive entry.

archive_entry_xattr_clear

my $status = archive_entry_xattr_clear($entry);

Remove all extended attributes (xattr) to the archive entry.

archive_entry_xattr_count

my $count = archive_entry_xattr_count($entry);

Returns the number of extended attributes (xattr) for the archive entry.

archive_entry_xattr_next

my $status = archive_entry_xattr_next($entry, $name, $buffer);

Retrieve the extended attribute (xattr) at the extended attributes (xattr) cursor, and increment the cursor. If the cursor is already at the end, it will return ARCHIVE_WARN, $name and $buffer will be undef. Here is an example which loops through all extended attributes (xattr) for an archive entry:

archive_entry_xattr_reset($entry);
while(my $r = archive_entry_xattr_next($entry, my $name, my $value))
{
  last if $r == ARCHIVE_WARN;
  die archive_error_string($a) if $r < ARCHIVE_OK;
  
  # do something with $name and $value
}

archive_entry_xattr_reset

my $status = archive_entry_xattr_reset($entry);

Reset the internal extended attributes (xattr) cursor for the archive entry.

archive_errno

my $errno = archive_errno($archive);

Returns a numeric error code indicating the reason for the most recent error return.

Return type is an errno integer value.

archive_error_string

my $string = archive_error_string($archive);

Returns a textual error message suitable for display. The error message here is usually more specific than that obtained from passing the result of archive_errno to strerror. Returns undef if there is not error.

archive_file_count

my $count = archive_file_count($archive);

Returns a count of the number of files processed by this archive object. The count is incremented by calls to archive_write_header or archive_read_next_header.

archive_filter_bytes

my $count = archive_filter_bytes($archive, $level);

Byte count for the given filter level. See archive_filter_count for details of the level numbering.

archive_filter_code

my $code = archive_filter_code($archive, $level);

Returns a numeric code identifying the indicated filter. See archive_filter_count for details of the level numbering.

archive_filter_count

my $count = archive_filter_count($archive);

Returns the number of filters in the current pipeline. For read archive handles, these filters are added automatically by the automatic format detection. For write archive handles, these filters are added by calls to the various archive_write_add_filter_XXX functions. Filters in the resulting pipeline are numbered so that filter 0 is the filter closest to the format handler. As a convenience, functions that expect a filter number will accept -1 as a synonym for the highest-numbered filter. For example, when reading a uuencoded gzipped tar archive, there are three filters: filter 0 is the gunzip filter, filter 1 is the uudecode filter, and filter 2 is the pseudo-filter that wraps the archive read functions. In this case, requesting archive_position(a,(-1)) would be a synonym for archive_position(a,(2)) which would return the number of bytes currently read from the archive, while archive_position(a,(1)) would return the number of bytes after uudecoding, and archive_position(a,(0)) would return the number of bytes after decompression.

archive_filter_name

my $string = archive_filter_name($archive, $level);

Returns a textual name identifying the indicated filter. See archive_filter_count for details of the numbering.

archive_format

my $code = archive_format($archive);

Returns a numeric code indicating the format of the current archive entry. This value is set by a successful call to archive_read_next_header. Note that it is common for this value to change from entry to entry. For example, a tar archive might have several entries that utilize GNU tar extensions and several entries that do not. These entries will have different format codes.

archive_format_name

my $string = archive_format_name($archive);

A textual description of the format of the current entry.

archive_match_exclude_entry

my $status = archive_match_exclude_entry($archive, $flag, $entry);

Add exclusion entry

archive_match_exclude_pattern

my $status = archive_match_exclude_pattern($archive, $pattern);

Add exclusion pathname pattern.

archive_match_exclude_pattern_from_file

my $status = archive_match_exclude_pattern_from_file($archive, $filename, $null_separator);

Add exclusion pathname pattern from file.

archive_match_excluded

my $bool = archive_match_excluded($archive, $entry);

Test if archive_entry is excluded. This is a convenience function. This is the same as calling all archive_match_path_excluded, archive_match_time_excluded and archive_match_owner_excluded.

archive_match_free

my $status = archive_match_free($archive);

Free the resources previously allocated with archive_match_new.

archive_match_include_date

my $status = archive_match_include_date($archive, $flag, $date_string);

Set inclusion time by a date string

archive_match_include_file_time

my $status = archive_match_include_file_time($archive, $flag, $pathname);

Set inclusion time by a particular file

archive_match_include_gid

my $status = archive_match_include_gid($archive, $gid);

The match object $archive should match entries with the given $gid

archive_match_include_gname

my $status = archive_match_include_gname($archive, $gname);

The match object $archive should match entries with the given group name

archive_match_include_pattern

my $status = archive_match_include_pattern_from_file($archive, $pattern);

Add inclusion pathname pattern

archive_match_include_pattern_from_file

my $status = archive_match_include_pattern_from_file($archive, $filename, $null_separator);

Add inclusion pathname pattern from file

archive_match_include_time

my $status = archive_match_include_time($archive, $flag, $sec, $nsec);

Set inclusion time

archive_match_include_uid

my $status = archive_match_include_uid($archive, $uid);

The match object $archive should match entries with the given $uid

archive_match_include_uname

my $status = archive_match_include_uname($archive, $uname);

The match object $archive should match entries with the given user name

archive_match_new

my $archive = archive_match_new();

Allocates and initializes a archive object suitable for reading and matching with an archive.

archive_match_owner_excluded

my $bool = archive_match_owner_excluded($archive, $entry);

Test if a file is excluded by its uid, gid, user name or group name.

archive_match_path_excluded

my $bool = archive_match_path_excluded($archive, $entry);

Test if pathname is excluded.

archive_match_path_unmatched_inclusions

my $count = archive_match_path_unmatched_inclusions($archive);

Return the amount number of unmatched inclusion patterns

archive_match_path_unmatched_inclusions_next

my $status = archive_match_path_unmatched_inclusions_next($archive, $pattern);

Fetch the next unmatched pattern.

archive_match_time_excluded

my $bool = archive_match_time_excluded($archive, $entry);

Test if a file is excluded by its time stamp.

archive_perl_codeset

my $string = archive_perl_codeset();

Returns the name of the "codeset" (character encoding, example: "UTF-8" for UTF-8 or "ANSI_X3.4-1968" for ASCII) of the currently configured locale.

archive_perl_utf8_mode

my $bool = archive_perl_utf8_mode();

Returns true if the internal "codeset" used by libarchive is UTF-8.

archive_read_append_filter

my $status = archive_read_append_filter($archive, $code)

Add the given filter by its code.

The _append_ form is to manually set the format and filters to be used. This is useful to bypass the bidding process when the format and filters to use is known in advance.

archive_read_append_filter_program

my $status = archive_read_append_filter_program($archive, $command);

Data is feed through the specified external program before being dearchived. Note that this disables automatic detection of the compression format, so it makes no sense to specify this in conjunction with any other decompression option.

The _append_ form is to manually set the format and filters to be used. This is useful to bypass the bidding process when the format and filters to use is known in advance.

archive_read_append_filter_program_signature

my $status = archive_read_append_filter_program_signature($archive, $command, $signature);

Data is feed through the specified external program before being dearchived, if the signature matches.

The _append_ form is to manually set the format and filters to be used. This is useful to bypass the bidding process when the format and filters to use is known in advance.

archive_read_close

my $status = archive_read_close($archive);

Complete the archive and invoke the close callback.

archive_read_data

my $count_or_status = archive_read_data($archive, $buffer, $max_size);

Read data associated with the header just read. Internally, this is a convenience function that calls archive_read_data_block and fills any gaps with nulls so that callers see a single continuous stream of data. Returns the actual number of bytes read, 0 on end of data and a negative value on error.

archive_read_data_block

my $count_or_status = archive_read_data_block($archive, $buffer, $offset);

Return the next available block of data for this entry. Unlike archive_read_data, this function allows you to correctly handle sparse files, as supported by some archive formats. The library guarantees that offsets will increase and that blocks will not overlap. Note that the blocks returned from this function can be much larger than the block size read from disk, due to compression and internal buffer optimizations.

archive_read_data_into_fh

my $status = archive_read_data_into_fh($archive, $fh);

A convenience function that repeatedly calls archive_read_data_block to copy the entire entry to the provided file handle.

archive_read_data_skip

my $status = archive_read_data_skip($archive);

A convenience function that repeatedly calls archive_read_data to skip all of the data for this archive entry.

archive_read_disk_can_descend

my $bool = archive_read_disk_can_descend($archive);

Undocumented libarchive function.

archive_read_disk_current_filesystem

my $status = archive_read_disk_current_filesystem($archive);

Undocumented libarchive function.

archive_read_disk_current_filesystem_is_remote

my $status = archive_read_disk_current_filesystem_is_remote($archive);

Undocumented libarchive function.

archive_read_disk_current_filesystem_is_synthetic

my $status = archive_read_disk_current_filesystem_is_synthetic($archive);

Undocumented libarchive function.

archive_read_disk_descend

my $status = archive_read_disk_descend($archive);

Request that current entry be visited. If you invoke it on every directory, you'll get a physical traversal. This is ignored if the current entry isn't a directory or a link to a directory. So, if you invoke this on every returned path, you'll get a full logical traversal.

archive_read_disk_entry_from_file

my $status = archive_read_disk_entry_from_file($archive, $entry, $fh, undef);
my $status = archive_read_disk_entry_from_file($archive, $entry, $fh, \@stat);
my $status = archive_read_disk_entry_from_file($archive, $entry, undef, \@stat);

Populates a struct archive_entry object with information about a particular file. The archive_entry object must have already been created with archive_entry_new and at least one of the source path or path fields must already be set. (If both are set, the source path will be used.)

Information is read from disk using the path name from the struct archive_entry object. If a file handle ($fh) is provided, some information will be obtained using that file handle, on platforms that support the appropriate system calls.

Note: The C API supports passing in a stat structure for some performance benefits. Currently this is unsupported in the Perl version, and you must pass undef in as the forth argument, for possible future compatibility.

Where necessary, user and group ids are converted to user and group names using the currently registered lookup functions above. This affects the file ownership fields and ACL values in the struct archive_entry object.

archive_read_disk_gname

my $string = archive_read_disk_gname($archive, $gid);

Returns a group name given a gid value. By default always returns undef.

archive_read_disk_new

my $archive = archive_read_disk_new();

Allocates and initializes an archive object suitable for reading object information from disk.

archive_read_disk_open

my $status = archive_read_disk_open($archive, $string)

Allocates and initializes an archive object suitable for reading objects from disk.

archive_read_disk_set_atime_restored

my $status = archive_read_disk_set_atime_restored($archive);

Request that the access time of the entry visited by traversal be restored.

archive_read_disk_set_behavior

my $status = archive_read_disk_set_behavior($archive, $flags);

Undocumented libarchive function.

archive_read_disk_set_gname_lookup

my $status = archive_read_disk_set_gname_lookup($archive, $data, $lookup_callback, $cleanup_callback);

Register a callback for the lookup of GID from group names. In order to deregister call archive_read_disk_set_gname_lookup with both callback functions set to undef.

See Archive::Libarchive::FFI::Callback for calling conventions for the lookup and cleanup callbacks.

archive_read_disk_set_standard_lookup

my $status = archive_read_disk_set_standard_lookup($archive);

This convenience function installs a standard set of user and group name lookup functions. These functions use getpwuid and getgrgid to convert ids to names, defaulting to undef. if the names cannot be looked up. These functions also implement a simple memory cache to reduce the number of calls to getpwuid and getgrgid.

archive_read_disk_set_symlink_hybrid

my $status = archive_read_disk_set_symlink_hybrid($archive);

This sets the mode used for handling symbolic links. The "hybrid" mode currently behaves identically to the "logical" mode.

archive_read_disk_set_symlink_logical

my $status = archive_read_disk_set_symlink_logical($archive);

This sets the mode used for handling symbolic links. The "logical" mode follows all symbolic links.

archive_read_disk_set_symlink_physical

my $status = archive_read_disk_set_symlink_physical($archive);

This sets the mode used for handling symbolic links. The "physical" mode does not follow any symbolic links.

archive_read_disk_set_uname_lookup

my $status = archive_read_disk_set_uname_lookup($archive, $data, $lookup_callback, $cleanup_callback);

Register a callback for the lookup of UID from user names. In order to deregister call archive_read_disk_setugname_lookup with both callback functions set to undef.

See Archive::Libarchive::FFI::Callback for calling conventions for the lookup and cleanup callbacks.

archive_read_disk_uname

my $string = archive_read_disk_uname($archive, $gid);

Returns a user name given a uid value. By default always returns undef.

archive_read_extract

my $status = archive_read_extract($archive, $entry, $flags);

A convenience function that wraps the corresponding archive_write_disk interfaces. The first call to archive_read_extract creates a restore object using archive_write_disk_new and archive_write_disk_set_standard_lookup, then transparently invokes archive_write_disk_set_options, archive_write_header, archive_write_data, and archive_write_finish_entry to create the entry on disk and copy data into it. The flags argument is passed unmodified to archive_write_disk_set_options.

archive_read_extract2

my $status = archive_read_extract2($archive1, $entry, $archive2);

This is another version of archive_read_extract() that allows you to provide your own restore object. In particular, this allows you to override the standard lookup functions using archive_write_disk_set_group_lookup, and archive_write_disk_set_user_lookup. Note that archive_read_extract2 does not accept a flags argument; you should use archive_write_disk_set_options to set the restore options yourself.

archive_read_extract_set_skip_file

my $status = archive_read_extract_set_skip_file($archive, $dev, $ino);

Record the dev/ino of a file that will not be written. This is generally set to the dev/ino of the archive being read.

archive_read_free

my $status = archive_read_free($archive);

Invokes archive_read_close if it was not invoked manually, then release all resources.

archive_read_header_position

my $offset = archive_read_header_position($archive);

Retrieve the byte offset in UNCOMPRESSED data where last-read header started.

archive_read_new

my $archive = archive_read_new();

Allocates and initializes a archive object suitable for reading from an archive. Returns an opaque archive which may be a perl style object, or a C pointer (depending on the implementation), either way, it can be passed into any of the read functions documented here with an $archive argument.

archive_read_next_header

my $status = archive_read_next_header($archive, $entry);

Read the header for the next entry and return an entry object Returns an opaque archive which may be a perl style object, or a C pointer (depending on the implementation), either way, it can be passed into any of the functions documented here with an <$entry> argument.

archive_read_next_header2

my $status = archive_read_next_header2($archive, $entry);

Read the header for the next entry and populate the provided entry object.

archive_read_open

my $status = archive_read_open($archive, $data, $open_cb, $read_cb, $close_cb);

The same as archive_read_open2, except that the skip callback is assumed to be undef.

archive_read_open1

my $status = archive_read_open1($archive);

Opening freezes the callbacks.

archive_read_open2

my $status = archive_read_open2($archive, $data, $open_cb, $read_cb, $skip_cb, $close_cb);

Freeze the settings, open the archive, and prepare for reading entries. This is the most generic version of this call, which accepts four callback functions. Most clients will want to use archive_read_open_filename, archive_read_open_FILE, archive_read_open_fd, or archive_read_open_memory instead. The library invokes the client-provided functions to obtain raw bytes from the archive.

archive_read_open_fh

my $status = archive_read_open_fh($archive, $fh, $block_size);

Like archive_read_open_filename, except that it accepts a file handle and block size rather than a filename. Note that the file handle will not be automatically closed at end-of-archive.

If not specified, a block size of 10240 will be used.

There is no corresponding archive_read_open_fh in the C version of libarchive. This is provided in the place of archive_read_open_FILE and archive_read_open_fd, which are not in the Perl bindings for libarchive.

archive_read_open_filename

my $status = archive_read_open_filename($archive, $filename, $block_size);

Like archive_read_open, except that it accepts a simple filename and a block size. This function is safe for use with tape drives or other blocked devices.

If you pass in undef as the $filename, libarchive will use standard in as the input archive.

archive_read_open_filenames

my $status = archive_read_open_filenames($archive, \@filenames, $block_size);

Use this for reading multivolume files by filenames.

archive_read_open_memory

my $status = archive_read_open_memory($archive, $buffer);

Like archive_read_open, except that it uses a Perl scalar that holds the content of the archive. This function does not make a copy of the data stored in $buffer, so you should not modify the buffer until you have free the archive using archive_read_free.

Bad things will happen if the buffer falls out of scope and is deallocated before you free the archive, so make sure that there is a reference to the buffer somewhere in your programmer until archive_read_free is called.

archive_read_set_callback_data

my $status = archive_read_set_callback_data($archive, $data);

Set the client data for callbacks.

archive_read_set_close_callback

my $status = archive_read_set_close_callback($archive, $callback);

Set the close callback for the archive object.

archive_read_set_filter_option

my $status = archive_read_set_filter_option($archive, $module, $option, $value);

Specifies an option that will be passed to currently-registered filters (including decompression filters).

If option and value are both undef, these functions will do nothing and ARCHIVE_OK will be returned. If option is undef but value is not, these functions will do nothing and ARCHIVE_FAILED will be returned.

If module is not undef, option and value will be provided to the filter or reader named module. The return value will be that of the module. If there is no such module, ARCHIVE_FAILED will be returned.

If module is NULL, option and value will be provided to every registered module. If any module returns ARCHIVE_FATAL, this value will be returned immediately. Otherwise, ARCHIVE_OK will be returned if any module accepts the option, and ARCHIVE_FAILED in all other cases.

archive_read_set_format

my $status = archive_read_set_format($archive, $format);

Undocumented libarchive function.

archive_read_set_format_option

my $status = archive_read_set_format_option($archive, $module, $option, $value);

Specifies an option that will be passed to currently-registered format readers.

archive_read_set_open_callback($archive, $callback)

my $status = archive_read_set_open_callback($archive, $callback);

Set the open callback for the archive object.

archive_read_set_option

my $status = archive_read_set_option($archive, $module, $option, $value);

Calls archive_read_set_format_option then archive_read_set_filter_option. If either function returns ARCHIVE_FATAL, ARCHIVE_FATAL will be returned immediately. Otherwise, greater of the two values will be returned.

archive_read_set_options

my $status = archive_read_set_options($archive, $options);

options is a comma-separated list of options. If options is undef or empty, ARCHIVE_OK will be returned immediately.

Calls archive_read_set_option with each option in turn. If any archive_read_set_option call returns ARCHIVE_FATAL, ARCHIVE_FATAL will be returned immediately.

option=value: The option/value pair will be provided to every module. Modules that do not accept an option with this name will ignore it.
option: The option will be provided to every module with a value of "1".
!option: The option will be provided to every module with an undef value.
module:option=value, module:option, module:!option: As above, but the corresponding option and value will be provided only to modules whose name matches module.

archive_read_set_read_callback

my $status = archive_read_set_read_callback($archive, $callback);

Set the read callback for the archive object.

archive_read_set_seek_callback

my $status = archive_read_set_seek_callback($archive, $callback);

Set the seek callback for the archive object.

archive_read_set_skip_callback

my $status = archive_read_set_skip_callback($archive, $callback);

Set the skip callback for the archive object.

archive_read_support_filter_all

my $status = archive_read_support_filter_all($archive);

Enable all available decompression filters.

archive_read_support_filter_bzip2

my $status = archive_read_support_filter_bzip2($archive);

Enable bzip2 decompression filter.

archive_read_support_filter_compress

my $status = archive_read_support_filter_compress($archive);

Enable compress decompression filter.

archive_read_support_filter_grzip

my $status = archive_read_support_filter_grzip($archive);

Enable grzip decompression filter.

archive_read_support_filter_gzip

my $status = archive_read_support_filter_gzip($archive);

Enable gzip decompression filter.

archive_read_support_filter_lrzip

my $status = archive_read_support_filter_lrzip($archive);

Enable lrzip decompression filter.

archive_read_support_filter_lzip

my $status = archive_read_support_filter_lzip($archive);

Enable lzip decompression filter.

archive_read_support_filter_lzma

my $status = archive_read_support_filter_lzma($archive);

Enable lzma decompression filter.

archive_read_support_filter_lzop

my $status = archive_read_support_filter_lzop($archive);

Enable lzop decompression filter.

archive_read_support_filter_none

my $status = archive_read_support_filter_none($archive);

Enable none decompression filter.

archive_read_support_filter_program

my $status = archive_read_support_filter_program($archive, $command);

archive_read_support_filter_program_signature

my $status = archive_read_support_filter_program_signature($archive, $command, $signature);

Data is feed through the specified external program before being dearchived, if the signature matches.

archive_read_support_filter_rpm

my $status = archive_read_support_filter_rpm($archive);

Enable rpm decompression filter.

archive_read_support_filter_uu

my $status = archive_read_support_filter_uu($archive);

Enable uu decompression filter.

archive_read_support_filter_xz

my $status = archive_read_support_filter_xz($archive);

Enable xz decompression filter.

archive_read_support_format_7zip

my $status = archive_read_support_format_7zip($archive);

Enable 7zip archive format.

archive_read_support_format_all

my $status = archive_read_support_format_all($archive);

Enable all available archive formats.

archive_read_support_format_ar

my $status = archive_read_support_format_ar($archive);

Enable ar archive format.

archive_read_support_format_by_code

my $status = archive_read_support_format_by_code($archive, $code);

Enables a single format specified by the format code.

archive_read_support_format_cab

my $status = archive_read_support_format_cab($archive);

Enable cab archive format.

archive_read_support_format_cpio

my $status = archive_read_support_format_cpio($archive);

Enable cpio archive format.

archive_read_support_format_empty

my $status = archive_read_support_format_empty($archive);

Enable empty archive format.

archive_read_support_format_gnutar

my $status = archive_read_support_format_gnutar($archive);

Enable gnutar archive format.

archive_read_support_format_iso9660

my $status = archive_read_support_format_iso9660($archive);

Enable iso9660 archive format.

archive_read_support_format_lha

my $status = archive_read_support_format_lha($archive);

Enable lha archive format.

archive_read_support_format_mtree

my $status = archive_read_support_format_mtree($archive);

Enable mtree archive format.

archive_read_support_format_rar

my $status = archive_read_support_format_rar($archive);

Enable rar archive format.

archive_read_support_format_raw

my $status = archive_read_support_format_raw($archive);

Enable raw archive format.

archive_read_support_format_tar

my $status = archive_read_support_format_tar($archive);

Enable tar archive format.

archive_read_support_format_xar

my $status = archive_read_support_format_xar($archive);

Enable xar archive format.

archive_read_support_format_zip

my $status = archive_read_support_format_zip($archive);

Enable zip archive format.

archive_seek_data

my $count_or_status = archive_seek_data($archive, $offset, $whence);

Seek within the body of an entry. Similar to lseek.

archive_set_error

my $status = archive_set_error($archive, $errno, $format, @args);

Sets the numeric error code and error description that will be returned by archive_errno and archive_error_string. This function should be used within I/O callbacks to set system-specific error codes and error descriptions. This function accepts a printf-like format string and arguments (via perl's sprintf.

archive_version_number

my $version = archive_version_number();

Return the libarchive version as an integer.

archive_version_string

my $string = archive_version_string();

Return the libarchive as a version.

Returns a string value.

archive_write_add_filter

my $status = archive_write_add_filter($archive, $code);

A convenience function to set the filter based on the code.

archive_write_add_filter_b64encode

my $status = archive_write_add_filter_b64encode($archive);

Add b64encode filter

archive_write_add_filter_by_name

my $status = archive_write_add_filter_by_name($archive, $name);

A convenience function to set the filter based on the name.

archive_write_add_filter_bzip2

my $status = archive_write_add_filter_bzip2($archive);

Add bzip2 filter

archive_write_add_filter_compress

my $status = archive_write_add_filter_compress($archive);

Add compress filter

archive_write_add_filter_grzip

my $status = archive_write_add_filter_grzip($archive);

Add grzip filter

archive_write_add_filter_gzip

my $status = archive_write_add_filter_gzip($archive);

Add gzip filter

archive_write_add_filter_lrzip

my $status = archive_write_add_filter_lrzip($archive);

Add lrzip filter

archive_write_add_filter_lzip

my $status = archive_write_add_filter_lzip($archive);

Add lzip filter

archive_write_add_filter_lzma

my $status = archive_write_add_filter_lzma($archive);

Add lzma filter

archive_write_add_filter_lzop

my $status = archive_write_add_filter_lzop($archive);

Add lzop filter

archive_write_add_filter_none

my $status = archive_write_add_filter_none($archive);

Add none filter

archive_write_add_filter_program

my $status = archive_write_add_filter_program($archive, $cmd);

The archive will be fed into the specified compression program. The output of that program is blocked and written to the client write callbacks.

archive_write_add_filter_uuencode

my $status = archive_write_add_filter_uuencode($archive);

Add uuencode filter

archive_write_add_filter_xz

my $status = archive_write_add_filter_xz($archive);

Add xz filter

archive_write_close

my $status = archive_write_close($archive)

Complete the archive and invoke the close callback.

archive_write_data

my $status = archive_write_data($archive, $buffer);

Write data corresponding to the header just written.

This function returns the number of bytes actually written, or -1 on error.

archive_write_data_block

my $count_or_status = archive_write_data_block($archive, $buffer, $offset);

Writes the buffer to the current entry in the given archive starting at the given offset.

archive_write_disk_gid

my $int64 = archive_write_disk_gid($archive, $string, $int64);

Undocumented libarchive function.

archive_write_disk_new

my $archive = archive_write_disk_new();

Allocates and initializes a struct archive object suitable for writing objects to disk.

Returns an opaque archive which may be a perl style object, or a C pointer (Depending on the implementation), either way, it can be passed into any of the write functions documented here with an $archive argument.

archive_write_disk_set_group_lookup

my $status = archive_write_disk_set_group_lookup($archive, $data, $lookup_callback, $cleanup_callback);

Register a callback for the lookup of group names from group id numbers. In order to deregister call archive_write_disk_set_group_lookup with both callback functions set to undef.

See Archive::Libarchive::FFI::Callback for calling conventions for the lookup and cleanup callbacks.

archive_write_disk_set_options

my $status = archive_write_disk_set_options($archive, $flags);

The options field consists of a bitwise OR of one or more of the following values:

ARCHIVE_EXTRACT_OWNER
ARCHIVE_EXTRACT_PERM
ARCHIVE_EXTRACT_TIME
ARCHIVE_EXTRACT_NO_OVERWRITE
ARCHIVE_EXTRACT_UNLINK
ARCHIVE_EXTRACT_ACL
ARCHIVE_EXTRACT_FFLAGS
ARCHIVE_EXTRACT_XATTR
ARCHIVE_EXTRACT_SECURE_SYMLINKS
ARCHIVE_EXTRACT_SECURE_NODOTDOT
ARCHIVE_EXTRACT_SPARSE

archive_write_disk_set_skip_file

my $status = archive_write_disk_set_skip_file($archive, $device, $inode);

Records the device and inode numbers of a file that should not be overwritten. This is typically used to ensure that an extraction process does not overwrite the archive from which objects are being read. This capability is technically unnecessary but can be a significant performance optimization in practice.

archive_write_disk_set_standard_lookup

my $status = archive_write_disk_set_standard_lookup($archive);

This convenience function installs a standard set of user and group lookup functions. These functions use getpwnam and getgrnam to convert names to ids, defaulting to the ids if the names cannot be looked up. These functions also implement a simple memory cache to reduce the number of calls to getpwnam and getgrnam.

archive_write_disk_set_user_lookup

my $status = archive_write_disk_set_user_lookup($archive, $data, $lookup_callback, $cleanup_callback);

Register a callback for the lookup of user names from user id numbers. In order to deregister call archive_write_disk_set_user_lookup with both callback functions set to undef.

See Archive::Libarchive::FFI::Callback for calling conventions for the lookup and cleanup callbacks.

archive_write_disk_uid

my $int64 = archive_write_disk_uid($archive, $string, $int64);

Undocumented libarchive function.

archive_write_fail

my $status = archive_write_fail($archive);

Marks the archive as FATAL so that a subsequent free operation won't try to close cleanly. Provides a fast abort capability when the client discovers that things have gone wrong.

archive_write_finish_entry

my $status = archive_write_finish_entry($archive)

Close out the entry just written. Ordinarily, clients never need to call this, as it is called automatically by archive_write_next_header and archive_write_close as needed. However, some file attributes are written to disk only after the file is closed, so this can be necessary if you need to work with the file on disk right away.

archive_write_free

my $status = archive_write_free($archive);

Invokes archive_write_close if it was not invoked manually, then release all resources.

archive_write_get_bytes_in_last_block

my $count = archive_write_get_bytes_per_block($archive);

Retrieve the currently-set value for last block size. A value of -1 here indicates that the library should use default values.

archive_write_get_bytes_per_block

my $count = archive_write_get_bytes_per_block($archive);

Retrieve the block size to be used for writing. A value of -1 here indicates that the library should use default values. A value of zero indicates that internal blocking is suppressed.

archive_write_header

my $status = archive_write_header($archive, $entry);

Build and write a header using the data in the provided struct archive_entry structure. You can use archive_entry_new to create an $entry object and populate it with archive_entry_set* functions.

archive_write_new

my $archive = archive_write_new();

Allocates and initializes a archive object suitable for writing an new archive. Returns an opaque archive which may be a perl style object, or a C pointer (depending on the implementation), either way, it can be passed into any of the write functions documented here with an $archive argument.

archive_write_open

my $status = archive_write_open($archive, $data, $open_cb, $read_cb, $close_cb);

Freeze the settings, open the archive, and prepare for writing entries. This is the most generic form of this function, which accepts pointers to three callback functions which will be invoked by the compression layer to write the constructed archive.

archive_write_open_fh

my $status = archive_write_open_fh($archive, $fh);

A convenience form of archive_write_open() that accepts a file descriptor. Note that the file handle will not be automatically closed.

There is no corresponding archive_read_write_fh in the C version of libarchive. This is provided in the place of archive_write_open_FILE and archive_write_open_fd, which are not in the Perl bindings for libarchive.

archive_write_open_filename

my $status = archive_write_open_filename($archive, $filename);

A convenience form of archive_write_open that accepts a filename. If you have not invoked archive_write_set_bytes_in_last_block, then archive_write_open_filename will adjust the last-block padding depending on the file: it will enable padding when writing to standard output or to a character or block device node, it will disable padding otherwise. You can override this by manually invoking archive_write_set_bytes_in_last_block before calling archive_write_open. The archive_write_open_filename function is safe for use with tape drives or other block-oriented devices.

If you pass in undef as the $filename, libarchive will write the archive to standard out.

archive_write_open_memory

my $status = archive_write_open_memory($archive, \$scalar);

A convenience form of archive_write_open that accepts a reference to a scalar that will receive the archive.

archive_write_set_bytes_in_last_block

my $status = archive_write_set_bytes_in_last_block($archive, $bytes_in_last_block);

Sets the block size used for writing the last block. If this value is zero, the last block will be padded to the same size as the other blocks. Otherwise, the final block will be padded to a multiple of this size. In particular, setting it to 1 will cause the final block to not be padded. For compressed output, any padding generated by this option is applied only after the compression. The uncompressed data is always unpadded. The default is to pad the last block to the full block size (note that archive_write_open_filename will set this based on the file type). Unlike the other "set" functions, this function can be called after the archive is opened.

archive_write_set_bytes_per_block

my $status = archive_write_set_bytes_per_block($archive, $bytes_per_block);

Sets the block size used for writing the archive data. Every call to the write callback function, except possibly the last one, will use this value for the length. The default is to use a block size of 10240 bytes. Note that a block size of zero will suppress internal blocking and cause writes to be sent directly to the write callback as they occur.

archive_write_set_filter_option($archive, $module, $option, $value)

my $status = archive_write_set_filter_option($archive, $module, $option, $value);

Specifies an option that will be passed to currently-registered filters (including decompression filters).

If module is undef, option and value will be provided to every registered module. If any module returns ARCHIVE_FATAL, this value will be returned immediately. Otherwise, ARCHIVE_OK will be returned if any module accepts the option, and ARCHIVE_FAILED in all other cases.

archive_write_set_format

my $status = archive_write_set_format($archive, $code);

A convenience function to set the format based on the code.

archive_write_set_format_7zip($archive)

my $status = archive_write_set_format_7zip($archive);

Set the archive format to 7zip

archive_write_set_format_ar_bsd($archive)

my $status = archive_write_set_format_ar_bsd($archive);

Set the archive format to ar_bsd

archive_write_set_format_ar_svr4($archive)

my $status = archive_write_set_format_ar_svr4($archive);

Set the archive format to ar_svr4

archive_write_set_format_by_name

my $status = archive_write_set_format_by_name($archive, $name);

A convenience function to set the format based on the name.

archive_write_set_format_cpio($archive)

my $status = archive_write_set_format_cpio($archive);

Set the archive format to cpio

archive_write_set_format_cpio_newc($archive)

my $status = archive_write_set_format_cpio_newc($archive);

Set the archive format to cpio_newc

archive_write_set_format_gnutar($archive)

my $status = archive_write_set_format_gnutar($archive);

Set the archive format to gnutar

archive_write_set_format_iso9660($archive)

my $status = archive_write_set_format_iso9660($archive);

Set the archive format to iso9660

archive_write_set_format_mtree($archive)

my $status = archive_write_set_format_mtree($archive);

Set the archive format to mtree

archive_write_set_format_mtree_classic($archive)

my $status = archive_write_set_format_mtree_classic($archive);

Set the archive format to mtree_classic

archive_write_set_format_old_tar($archive)

my $status = archive_write_set_format_old_tar($archive);

Set the archive format to old_tar

archive_write_set_format_option

my $status = archive_write_set_format_option($archive, $module, $option, $value);

Specifies an option that will be passed to currently-registered format readers.

archive_write_set_format_pax($archive)

my $status = archive_write_set_format_pax($archive);

Set the archive format to pax

archive_write_set_format_pax_restricted($archive)

my $status = archive_write_set_format_pax_restricted($archive);

Set the archive format to pax_restricted

archive_write_set_format_shar($archive)

my $status = archive_write_set_format_shar($archive);

Set the archive format to shar

archive_write_set_format_shar_dump($archive)

my $status = archive_write_set_format_shar_dump($archive);

Set the archive format to shar_dump

archive_write_set_format_ustar($archive)

my $status = archive_write_set_format_ustar($archive);

Set the archive format to ustar

archive_write_set_format_v7tar($archive)

my $status = archive_write_set_format_v7tar($archive);

Set the archive format to v7tar

archive_write_set_format_xar($archive)

my $status = archive_write_set_format_xar($archive);

Set the archive format to xar

archive_write_set_format_zip($archive)

my $status = archive_write_set_format_zip($archive);

Set the archive format to zip

archive_write_set_option

my $status = archive_write_set_option($archive, $module, $option, $value);

Calls archive_write_set_format_option, then archive_write_set_filter_option. If either function returns ARCHIVE_FATAL, ARCHIVE_FATAL will be returned immediately. Otherwise, greater of the two values will be returned.

archive_write_set_options

my $status = archive_write_set_options($archive, $options);

options is a comma-separated list of options. If options is undef or empty, ARCHIVE_OK will be returned immediately.

Individual options have one of the following forms:

option=value: The option/value pair will be provided to every module. Modules that do not accept an option with this name will ignore it.
option: The option will be provided to every module with a value of "1".
!option: The option will be provided to every module with a NULL value.
module:option=value, module:option, module:!option: As above, but the corresponding option and value will be provided only to modules whose name matches module.

archive_write_set_skip_file

my $status = archive_write_set_skip_file($archive, $dev, $ino);

The dev/ino of a file that won't be archived. This is used to avoid recursively adding an archive to itself.

archive_write_zip_set_compression_deflate

my $status = archive_write_zip_set_compression_deflate($archive);

Set the compression method for the zip archive to deflate.

archive_write_zip_set_compression_store

my $status = archive_write_zip_set_compression_store($archive);

Set the compression method for the zip archive to store.

AUTHOR

Graham Ollis <plicease@cpan.org>

COPYRIGHT AND LICENSE

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.

To install Archive::Libarchive::FFI, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Archive::Libarchive::FFI

CPAN shell

perl -MCPAN -e shell
install Archive::Libarchive::FFI

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)