NAME
Lab::Bus::MODBUS_RS232 - RS232/RS485 MODBUS RTU protocol bus
VERSION
version 3.623
SYNOPSIS
use Lab::Bus::MODBUS_RS232;
my $h = Lab::Bus::MODBUS_RS232->new({
Interface => 'RS232',
Port => 'COM1|/dev/ttyUSB1'
slave_address => '1'
});COM1 is the Windows notation, /dev/ttyUSB1 the Linux equivalent. Use as needed.
DESCRIPTION
This is an interface package for Lab::Measurement to communicate via RS232/RS485 with a MODBUS RTU enabled device. It uses Lab::Bus::RS232 (RS485 can be done using a RS232<->RS485 converter for now). It's main use is to calculate the checksums needed by MODBUS RTU.
Refer to your device for the correct port configuration.
As of yet, this driver does NOT fully implement all MODBUS RTU functions. Only the function codes 3 and 6 are provided.
CONSTRUCTOR
new
All parameters are used as by Device::SerialPort respectively Lab::Bus::RS232. 'port' is needed in every case. Default value for timeout is 500ms and can be set by the parameter "Timeout". Other options you probably have to set: Handshake, Baudrate, Databits, Stopbits and Parity.
METHODS
Used by Lab::Connection. Not for direct use!!!
connectionRead
Reads data. Arguments: function (0x01,0x02,0x03,0x04 - "Read Coils", "Read Discrete Inputs", "Read Holding Registers", "Read Input Registers") slave_address (0xFF) mem_address ( 0xFFFF, Address of first word ) mem_count ( 0xFFFF, Count of words to read )
connectionWrite
Send data to instrument. Arguments:
function (0x05,0x06,0x0F,0x10 - "Write Single Coil", "Write Single Register", "Write Multiple Coils", "Write Multiple Registers")Currently only 0x06 is implemented.
slave_address (0xFF)
mem_address ( 0xFFFF, Address of word )
Value ( 0xFFFF, value to write to mem_address )CAVEATS/BUGS
This is a prototype...
SEE ALSO
COPYRIGHT AND LICENSE
This software is copyright (c) 2018 by the Lab::Measurement team; in detail:
Copyright 2011-2012 Andreas K. Huettel, Florian Olbrich
2016 Simon Reinhardt
2017 Andreas K. HuettelThis is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.