NAME

Sys::Virt::Domain - Represent & manage a libvirt guest domain

DESCRIPTION

The Sys::Virt::Domain module represents a guest domain managed by the virtual machine monitor.

METHODS

my $id = $dom->get_id()

Returns an integer with a locally unique identifier for the domain.

my $uuid = $dom->get_uuid()

Returns a 16 byte long string containing the raw globally unique identifier (UUID) for the domain.

my $uuid = $dom->get_uuid_string()

Returns a printable string representation of the raw UUID, in the format 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX'.

my $name = $dom->get_name()

Returns a string with a locally unique name of the domain

my $hostname = $dom->get_hostname($flags=0)

Returns a string representing the hostname of the guest. $flags can be zero or more of

Sys::Virt::Domain::GET_HOSTNAME_AGENT: Report the guest agent hostname
Sys::Virt::Domain::GET_HOSTNAME_LEASE: Report the DHCP lease hostname

my $str = $dom->get_metadata($type, $uri, $flags =0)

Returns the metadata element of type $type associated with the domain. If $type is Sys::Virt::Domain::METADATA_ELEMENT then the $uri parameter specifies the XML namespace to retrieve, otherwise $uri should be undef. The optional $flags parameter defaults to zero.

$dom->set_metadata($type, $val, $key, $uri, $flags=0)

Sets the metadata element of type $type to hold the value $val. If $type is Sys::Virt::Domain::METADATA_ELEMENT then the $key and $uri elements specify an XML namespace to use, otherwise they should both be undef. The optional $flags parameter defaults to zero.

$dom->is_active()

Returns a true value if the domain is currently running

$dom->is_persistent()

Returns a true value if the domain has a persistent configuration file defined

$dom->is_updated()

Returns a true value if the domain is running and has a persistent configuration file defined that is out of date compared to the current live config.

my $xml = $dom->get_xml_description($flags=0)

Returns an XML document containing a complete description of the domain's configuration. The optional $flags parameter controls generation of the XML document, defaulting to 0 if omitted. It can be one or more of the XML DUMP constants listed later in this document.

my $type = $dom->get_os_type()

Returns a string containing the name of the OS type running within the domain.

$dom->create($flags)

Start a domain whose configuration was previously defined using the define_domain method in Sys::Virt. The $flags parameter accepts one of the DOMAIN CREATION constants documented later, and defaults to 0 if omitted.

$dom->create_with_files($fds, $flags)

Start a domain whose configuration was previously defined using the define_domain method in Sys::Virt. The $fds parameter is an array of UNIX file descriptors which will be passed to the init process of the container. This is only supported with container based virtualization.The $flags parameter accepts one of the DOMAIN CREATION constants documented later, and defaults to 0 if omitted.

$dom->undefine()

Remove the configuration associated with a domain previously defined with the define_domain method in Sys::Virt. If the domain is running, you probably want to use the shutdown or destroy methods instead.

$dom->suspend()

Temporarily stop execution of the domain, allowing later continuation by calling the resume method.

$dom->resume()

Resume execution of a domain previously halted with the suspend method.

$dom->pm_wakeup()

Wakeup the guest from power management suspend state

$dom->pm_suspend_for_duration($target, $duration, $flags=0)

Tells the guest OS to enter the power management suspend state identified by $target. The $target parameter should be one of the NODE SUSPEND CONSTANTS listed in Sys::Virt. The $duration specifies when the guest should automatically wakeup. The $flags parameter is optional and defaults to zero.

$dom->save($filename, $dxml=undef, $params=undef, $flags=0)

Take a snapshot of the domain's state and save the information to the file named in the $filename parameter. The domain can later be restored from this file with the restore_domain method on the Sys::Virt object. The optional $dxml parameter can be used to alter portions of the domain XML that will be used when performing restore. The $params parameter is a hash reference whose keys is a subset of the SAVE / RESTORE PARAMETER CONSTANTS. The $flags parameter accepts one of the SAVE / RESTORE FLAG CONSTANTS described later and defaults to zero.

$dom->managed_save($flags=0)

Take a snapshot of the domain's state and save the information to a managed save location. The domain will be automatically restored with this state when it is next started. The $flags parameter is unused and defaults to zero.

$bool = $dom->has_managed_save_image($flags=0)

Return a non-zero value if the domain has a managed save image that will be used at next start. The $flags parameter is unused and defaults to zero.

$dom->managed_save_remove($flags=0)

Remove the current managed save image, causing the guest to perform a full boot next time it is started. The $flags parameter is unused and defaults to zero.

$dom->managed_save_define_xml($xml, $flags=0)

Update the XML of the managed save image to $xml. The $flags parameter is unused and defaults to zero.

$xml = $dom->managed_save_get_xml_description($flags=0)

Get the XML in the managed save image. The $flags parameter accepts the following constants

Sys::Virt::Domain::SAVE_IMAGE_XML_SECURE: Include security sensitive information in the XML dump, such as passwords.

$dom->core_dump($filename[, $flags])

Trigger a core dump of the guest virtual machine, saving its memory image to $filename so it can be analysed by tools such as crash. The optional $flags flags parameter is currently unused and if omitted will default to 0.

$dom->core_dump_format($filename, $format, [, $flags])

Trigger a core dump of the guest virtual machine, saving its memory image to $filename so it can be analysed by tools such as crash. The $format parameter is one of the core dump format constants. The optional $flags flags parameter is currently unused and if omitted will default to 0.

Sys::Virt::Domain::CORE_DUMP_FORMAT_RAW: The raw ELF format
Sys::Virt::Domain::CORE_DUMP_FORMAT_KDUMP_ZLIB: The zlib compressed ELF format
Sys::Virt::Domain::CORE_DUMP_FORMAT_KDUMP_SNAPPY: The snappy compressed ELF format
Sys::Virt::Domain::CORE_DUMP_FORMAT_KDUMP_LZO: The lzo compressed ELF format
Sys::Virt::Domain::CORE_DUMP_FORMAT_WIN_DMP: The Windows dump format

$dom->destroy()

Immediately poweroff the machine. This is equivalent to removing the power plug. The guest OS is given no time to cleanup / save state. For a clean poweroff sequence, use the shutdown method instead.

my $info = $dom->get_info()

Returns a hash reference summarising the execution state of the domain. The elements of the hash are as follows:

maxMem: The maximum memory allowed for this domain, in kilobytes
memory: The current memory allocated to the domain in kilobytes
cpuTime: The amount of CPU time used by the domain
nrVirtCpu: The current number of virtual CPUs enabled in the domain
state: The execution state of the machine, which will be one of the constants &Sys::Virt::Domain::STATE_*.

my ($state, $reason) = $dom->get_state()

Returns an array whose values specify the current state of the guest, and the reason for it being in that state. The $state values are the same as for the get_info API, and the $reason values come from:

Sys::Virt::Domain::STATE_CRASHED_UNKNOWN: It is not known why the domain has crashed
Sys::Virt::Domain::STATE_CRASHED_PANICKED: The domain has crashed due to a kernel panic
Sys::Virt::Domain::STATE_NOSTATE_UNKNOWN: It is not known why the domain has no state
Sys::Virt::Domain::STATE_PAUSED_DUMP: The guest is paused due to a core dump operation
Sys::Virt::Domain::STATE_PAUSED_FROM_SNAPSHOT: The guest is paused due to a snapshot
Sys::Virt::Domain::STATE_PAUSED_IOERROR: The guest is paused due to an I/O error
Sys::Virt::Domain::STATE_PAUSED_MIGRATION: The guest is paused due to migration
Sys::Virt::Domain::STATE_PAUSED_SAVE: The guest is paused due to a save operation
Sys::Virt::Domain::STATE_PAUSED_UNKNOWN: It is not known why the domain has paused
Sys::Virt::Domain::STATE_PAUSED_USER: The guest is paused at admin request
Sys::Virt::Domain::STATE_PAUSED_WATCHDOG: The guest is paused due to the watchdog
Sys::Virt::Domain::STATE_PAUSED_SHUTTING_DOWN: The guest is paused while domain shutdown takes place
Sys::Virt::Domain::STATE_PAUSED_SNAPSHOT: The guest is paused while a snapshot takes place
Sys::Virt::Domain::STATE_PAUSED_CRASHED: The guest is paused due to a kernel panic
Sys::Virt::Domain::STATE_PAUSED_STARTING_UP: The guest is paused as it is being started up.
Sys::Virt::Domain::STATE_PAUSED_POSTCOPY: The guest is paused as post-copy migration is taking place
Sys::Virt::Domain::STATE_PAUSED_POSTCOPY_FAILED: The guest is paused as post-copy migration failed
Sys::Virt::Domain::STATE_PAUSED_API_ERROR: The guest is paused as a result of failed resume operation at the end of some APIs which internally suspend guests.
Sys::Virt::Domain::STATE_RUNNING_BOOTED: The guest is running after being booted
Sys::Virt::Domain::STATE_RUNNING_FROM_SNAPSHOT: The guest is running after restore from snapshot
Sys::Virt::Domain::STATE_RUNNING_MIGRATED: The guest is running after migration
Sys::Virt::Domain::STATE_RUNNING_MIGRATION_CANCELED: The guest is running after migration abort
Sys::Virt::Domain::STATE_RUNNING_RESTORED: The guest is running after restore from file
Sys::Virt::Domain::STATE_RUNNING_SAVE_CANCELED: The guest is running after save cancel
Sys::Virt::Domain::STATE_RUNNING_UNKNOWN: It is not known why the domain has started
Sys::Virt::Domain::STATE_RUNNING_UNPAUSED: The guest is running after a resume
Sys::Virt::Domain::STATE_RUNNING_WAKEUP: The guest is running after wakeup from power management suspend
Sys::Virt::Domain::STATE_RUNNING_CRASHED: The guest was restarted after crashing
Sys::Virt::Domain::STATE_RUNNING_POSTCOPY: The guest is running but post-copy is taking place
Sys::Virt::Domain::STATE_RUNNING_POSTCOPY_FAILED: The guest is running, but migration failed in post-copy
Sys::Virt::Domain::STATE_BLOCKED_UNKNOWN: The guest is blocked for an unknown reason
Sys::Virt::Domain::STATE_SHUTDOWN_UNKNOWN: It is not known why the domain has shutdown
Sys::Virt::Domain::STATE_SHUTDOWN_USER: The guest is shutdown due to admin request
Sys::Virt::Domain::STATE_SHUTOFF_CRASHED: The guest is shutoff after a crash
Sys::Virt::Domain::STATE_SHUTOFF_DESTROYED: The guest is shutoff after being destroyed
Sys::Virt::Domain::STATE_SHUTOFF_FAILED: The guest is shutoff due to a virtualization failure
Sys::Virt::Domain::STATE_SHUTOFF_FROM_SNAPSHOT: The guest is shutoff after a snapshot
Sys::Virt::Domain::STATE_SHUTOFF_MIGRATED: The guest is shutoff after migration
Sys::Virt::Domain::STATE_SHUTOFF_SAVED: The guest is shutoff after a save
Sys::Virt::Domain::STATE_SHUTOFF_SHUTDOWN: The guest is shutoff due to controlled shutdown
Sys::Virt::Domain::STATE_SHUTOFF_UNKNOWN: It is not known why the domain has shutoff
Sys::Virt::Domain::STATE_SHUTOFF_DAEMON: The daemon stopped the guest due to a failure
Sys::Virt::Domain::STATE_PMSUSPENDED_UNKNOWN: It is not known why the domain was suspended to RAM
Sys::Virt::Domain::STATE_PMSUSPENDED_DISK_UNKNOWN: It is not known why the domain was suspended to disk

my $info = $dom->get_control_info($flags=0)

Returns a hash reference providing information about the control channel. The returned keys in the hash are

state: One of the CONTROL INFO constants listed later
details: Currently unused, always 0.
stateTime: The elapsed time since the control channel entered the current state.

my $time = $dom->get_time($flags=0);

Get the current time of the guest, in seconds and nanoseconds. The $flags parameter is currently unused and defaults to zero. The return value is an array ref with two elements, the first contains the time in seconds, the second contains the remaining nanoseconds.

$dom->set_time($secs, $nsecs, $flags=0);

Set the current time of the guest, in seconds and nanoseconds. The $flags parameter accepts one of

Sys::Virt::Domain::TIME_SYNC: Re-sync domain time from domain's RTC.

$dom->set_user_password($username, $password, $flags=0);

Update the password for account $username to be $password. $password is the clear-text password string unless the PASSWORD_ENCRYPTED flag is set.

Sys::Virt::Domain::PASSWORD_ENCRYPTED: The $password is encrypted with the password scheme required by the guest OS.

$dom->rename($newname, $flags=0)

Change the name of an inactive guest to be $newname. The $flags parameter is currently unused and defaults to zero.

my @errs = $dom->get_disk_errors($flags=0)

Returns a list of all disk errors that have occurred on the backing store for the guest's virtual disks. The returned array elements are hash references, containing two keys

path: The path of the disk with an error
error: The error type

$dom->send_key($keycodeset, $holdtime, \@keycodes, $flags=0)

Sends a sequence of keycodes to the guest domain. The $keycodeset should be one of the constants listed later in the KEYCODE SET section. $holdtiem is the duration, in milliseconds, to keep the key pressed before releasing it and sending the next keycode. @keycodes is an array reference containing the list of keycodes to send to the guest. The elements in the array should be keycode values from the specified keycode set. $flags is currently unused.

my $info = $dom->get_block_info($dev, $flags=0)

Returns a hash reference summarising the disk usage of the host backing store for a guest block device. The $dev parameter should be the path to the backing store on the host. $flags is currently unused and defaults to 0 if omitted. The returned hash contains the following elements

capacity: Logical size in bytes of the block device backing image *
allocation: Highest allocated extent in bytes of the block device backing image
physical: Physical size in bytes of the container of the backing image

$dom->set_max_memory($mem)

Set the maximum memory for the domain to the value $mem. The value of the $mem parameter is specified in kilobytes.

$mem = $dom->get_max_memory()

Returns the current maximum memory allowed for this domain in kilobytes.

$dom->set_memory($mem, $flags)

Set the current memory for the domain to the value $mem. The value of the $mem parameter is specified in kilobytes. This must be less than, or equal to the domain's max memory limit. The $flags parameter can control whether the update affects the live guest, or inactive config, defaulting to modifying the current state.

$dom->set_memory_stats_period($period, $flags)

Set the period on which guests memory stats are refreshed, with $period being a value in seconds. The $flags parameter is currently unused.

$dom->shutdown()

Request that the guest OS perform a graceful shutdown and poweroff. This usually requires some form of cooperation from the guest operating system, such as responding to an ACPI signal, or a guest agent process. For an immediate, forceful poweroff, use the destroy method instead.

$dom->reboot([$flags])

Request that the guest OS perform a graceful shutdown and optionally restart. The optional $flags parameter is currently unused and if omitted defaults to zero.

$dom->reset([$flags])

Perform a hardware reset of the virtual machine. The guest OS is given no opportunity to shutdown gracefully. The optional $flags parameter is currently unused and if omitted defaults to zero.

$dom->get_max_vcpus()

Return the maximum number of vcpus that are configured for the domain

$dom->attach_device($xml[, $flags])

Hotplug a new device whose configuration is given by $xml, to the running guest. The optional <$flags> parameter defaults to 0, but can accept one of the device hotplug flags described later.

$dom->detach_device($xml[, $flags])

Hotunplug an existing device whose configuration is given by $xml, from the running guest. The optional <$flags> parameter defaults to 0, but can accept one of the device hotplug flags described later.

$dom->detach_device_alias($alias[, $flags])

Hotunplug an existing device which is identified by $alias. The optional <$flags> parameter defaults to 0, but can accept one of the device hotplug flags described later.

$dom->update_device($xml[, $flags])

Update the configuration of an existing device. The new configuration is given by $xml. The optional <$flags> parameter defaults to 0 but can accept one of the device hotplug flags described later.

$data = $dom->block_peek($path, $offset, $size[, $flags])

Peek into the guest disk $path, at byte $offset capturing $size bytes of data. The returned scalar may contain embedded NULLs. The optional $flags parameter is currently unused and if omitted defaults to zero.

$data = $dom->memory_peek($offset, $size[, $flags])

Peek into the guest memory at byte $offset virtual address, capturing $size bytes of memory. The return scalar may contain embedded NULLs. The optional $flags parameter is currently unused and if omitted defaults to zero.

$flag = $dom->get_autostart();

Return a true value if the guest domain is configured to automatically start upon boot. Return false, otherwise

$dom->set_autostart($flag)

Set the state of the autostart flag, which determines whether the guest will automatically start upon boot of the host OS

$dom->set_vcpus($count, [$flags])

Set the number of virtual CPUs in the guest VM to $count. The optional $flags parameter can be used to control whether the setting changes the live config or inactive config.

$dom->set_vcpu($cpumap, $state, [$flags])

Set the state of the CPUs in $cpumap to $state. The $flags parameter defaults to zero if not present.

$count = $dom->get_vcpus([$flags])

Get the number of virtual CPUs in the guest VM. The optional $flags parameter can be used to control whether to query the setting of the live config or inactive config.

$dom->set_guest_vcpus($cpumap, $state, [$flags=0])

Set the online status of the guest OS CPUs. The $cpumap parameter describes the set of CPUs to modify (e.g. "0-3,^1"). $state is either 1 to set the CPUs online, or 0 to set them offline. The $flags parameter is currently unused and defaults to 0.

$info $dom->get_guest_vcpus([$flags=0])

Query information about the guest OS CPUs. The returned data is a hash reference with the following keys.

vcpus: String containing bitmap representing CPU ids reported currently known to the guest.
online: String containing bitmap representing CPU ids that are currently online in the guest.
offlinable: String containing bitmap representing CPU ids that can be offlined in the guest.

The $flags parameter is currently unused and defaults to 0.

$type = $dom->get_scheduler_type()

Return the scheduler type for the guest domain

$stats = $dom->block_stats($path)

Fetch the current I/O statistics for the block device given by $path. The returned hash reference contains keys for

rd_req: Number of read requests
rd_bytes: Number of bytes read
wr_req: Number of write requests
wr_bytes: Number of bytes written
errs: Some kind of error count

my $params = $dom->get_scheduler_parameters($flags=0)

Return the set of scheduler tunable parameters for the guest, as a hash reference. The precise set of keys in the hash are specific to the hypervisor.

$dom->set_scheduler_parameters($params, $flags=0)

Update the set of scheduler tunable parameters. The value names for tunables vary, and can be discovered using the get_scheduler_params call

my $params = $dom->get_memory_parameters($flags=0)

Return a hash reference containing the set of memory tunable parameters for the guest. The keys in the hash are one of the constants MEMORY PARAMETERS described later. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->set_memory_parameters($params, $flags=0)

Update the memory tunable parameters for the guest. The $params should be a hash reference whose keys are one of the MEMORY PARAMETERS constants. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

my $params = $dom->get_blkio_parameters($flags=0)

Return a hash reference containing the set of blkio tunable parameters for the guest. The keys in the hash are one of the constants BLKIO PARAMETERS described later. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->set_blkio_parameters($params, $flags=0)

Update the blkio tunable parameters for the guest. The $params should be a hash reference whose keys are one of the BLKIO PARAMETERS constants. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$stats = $dom->get_block_iotune($disk, $flags=0)

Return a hash reference containing the set of blkio tunable parameters for the guest disk $disk. The keys in the hash are one of the constants BLOCK IOTUNE PARAMETERS described later.

$dom->set_block_iotune($disk, $params, $flags=0);

Update the blkio tunable parameters for the guest disk $disk. The $params should be a hash reference whose keys are one of the BLOCK IOTUNE PARAMETERS constants.

my $params = $dom->get_interface_parameters($intf, $flags=0)

Return a hash reference containing the set of interface tunable parameters for the guest. The keys in the hash are one of the constants INTERFACE PARAMETERS described later.

$dom->set_interface_parameters($intf, $params, $flags=0)

Update the interface tunable parameters for the guest. The $params should be a hash reference whose keys are one of the INTERFACE PARAMETERS constants.

my $params = $dom->get_numa_parameters($flags=0)

Return a hash reference containing the set of numa tunable parameters for the guest. The keys in the hash are one of the constants NUMA PARAMETERS described later. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->set_numa_parameters($params, $flags=0)

Update the numa tunable parameters for the guest. The $params should be a hash reference whose keys are one of the NUMA PARAMETERS constants. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

my $params = $dom->get_perf_events($flags=0)

Return a hash reference containing the set of performance events that are available for the guest. The keys in the hash are one of the constants PERF EVENTS described later. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->set_perf_events($params, $flags=0)

Update the enabled state for performance events for the guest. The $params should be a hash reference whose keys are one of the PERF EVENTS constants. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->block_resize($disk, $newsize, $flags=0)

Resize the disk $disk to have new size $newsize KB. If the disk is backed by a special image format, the actual resize is done by the hypervisor. If the disk is backed by a raw file, or block device, the resize must be done prior to invoking this API call, and it merely updates the hypervisor's view of the disk size. The following flags may be used

Sys::Virt::Domain::BLOCK_RESIZE_BYTES: Treat $newsize as if it were in bytes, rather than KB.

$dom->interface_stats($path)

Fetch the current I/O statistics for the block device given by $path. The returned hash contains keys for

rx_bytes: Total bytes received
rx_packets: Total packets received
rx_errs: Total packets received with errors
rx_drop: Total packets drop at reception
tx_bytes: Total bytes transmitted
tx_packets: Total packets transmitted
tx_errs: Total packets transmitted with errors
tx_drop: Total packets dropped at transmission.

$dom->memory_stats($flags=0)

Fetch the current memory statistics for the guest domain. The $flags parameter is currently unused and can be omitted. The returned hash contains keys for

swap_in: Data read from swap space
swap_out: Data written to swap space
major_fault: Page fault involving disk I/O
minor_fault: Page fault not involving disk I/O
unused: Memory not used by the system
available: Total memory seen by guest
rss: Resident set size. Size of memory resident in host RAM.

$info = $dom->get_security_label()

Fetch information about the security label assigned to the guest domain. The returned hash reference has two keys, model gives the name of the security model in effect (e.g. selinux), while label provides the name of the security label applied to the domain. This method only returns information about the first security label. To retrieve all labels, use get_security_label_list.

@info = $dom->get_security_label_list()

Fetches information about all security labels assigned to the guest domain. The elements in the returned array are all hash references, whose keys are as described for get_security_label.

$ddom = $dom->migrate(destcon, \%params, flags=0)

Migrate a domain to an alternative host. The destcon parameter should be a Sys::Virt connection to the remote target host. The flags parameter takes one or more of the Sys::Virt::Domain::MIGRATE_XXX constants described later in this document. The %params parameter is a hash reference used to set various parameters for the migration operation, with the following valid keys.

Sys::Virt::Domain::MIGRATE_PARAM_URI

The URI to use for initializing the domain migration. It takes a hypervisor specific format. The uri_transports element of the hypervisor capabilities XML includes details of the supported URI schemes. When omitted libvirt will auto-generate suitable default URI. It is typically only necessary to specify this URI if the destination host has multiple interfaces and a specific interface is required to transmit migration data.

Sys::Virt::Domain::MIGRATE_PARAM_DEST_NAME

The name to be used for the domain on the destination host. Omitting this parameter keeps the domain name the same. This field is only allowed to be used with hypervisors that support domain renaming during migration.

Sys::Virt::Domain::MIGRATE_PARAM_DEST_XML

The new configuration to be used for the domain on the destination host. The configuration must include an identical set of virtual devices, to ensure a stable guest ABI across migration. Only parameters related to host side configuration can be changed in the XML. Hypervisors which support this field will forbid migration if the provided XML would cause a change in the guest ABI. This field cannot be used to rename the domain during migration (use VIR_MIGRATE_PARAM_DEST_NAME field for that purpose). Domain name in the destination XML must match the original domain name.

Omitting this parameter keeps the original domain configuration. Using this field with hypervisors that do not support changing domain configuration during migration will result in a failure.

Sys::Virt::Domain::MIGRATE_PARAM_GRAPHICS_URI

URI to use for migrating client's connection to domain's graphical console as VIR_TYPED_PARAM_STRING. If specified, the client will be asked to automatically reconnect using these parameters instead of the automatically computed ones. This can be useful if, e.g., the client does not have a direct access to the network virtualization hosts are connected to and needs to connect through a proxy. The URI is formed as follows:

protocol://hostname[:port]/[?parameters]

where protocol is either "spice" or "vnc" and parameters is a list of protocol specific parameters separated by '&'. Currently recognized parameters are "tlsPort" and "tlsSubject". For example,

spice://target.host.com:1234/?tlsPort=4567

Sys::Virt::Domain::MIGRATE_PARAM_BANDWIDTH

The maximum bandwidth (in MiB/s) that will be used for migration. If set to 0 or omitted, libvirt will choose a suitable default. Some hypervisors do not support this feature and will return an error if this field is used and is not 0.

Sys::Virt::Domain::MIGRATE_PARAM_BANDWIDTH_POSTCOPY

The maximum bandwidth (in MiB/s) that will be used for migration during post-copy phase. If set to 0 or omitted, libvirt will choose a suitable default. Some hypervisors do not support this feature and return an error if this field is used and is not 0.

Sys::Virt::Domain::MIGRATE_PARAM_LISTEN_ADDRESS

The address on which to listen for incoming migration connections. If omitted, libvirt will listen on the wildcard address (0.0.0.0 or ::). This default may be a security risk if guests, or other untrusted users have the ability to connect to the virtualization host, thus use of an explicit restricted listen address is recommended.

Sys::Virt::Domain::MIGRATE_PARAM_DISK_PORT

Port that destination server should use for incoming disks migration. Type is VIR_TYPED_PARAM_INT. If set to 0 or omitted, libvirt will choose a suitable default. At the moment this is only supported by the QEMU driver.

Sys::Virt::Domain::MIGRATE_PARAM_MIGRATE_DISKS

The list of disks to migrate when doing block storage migration. In contrast to other parameters whose values are plain strings, the parameter value should be an array reference, whose elements are in turn strings representing the disk target names.

Sys::Virt::Domain::MIGRATE_PARAM_COMPRESSION

The type of compression method use use, either xbzrle or mt.

Sys::Virt::Domain::MIGRATE_PARAM_COMPRESSION_MT_THREADS

The number of compression threads to use

Sys::Virt::Domain::MIGRATE_PARAM_COMPRESSION_MT_DTHREADS

The number of decompression threads

Sys::Virt::Domain::MIGRATE_PARAM_COMPRESSION_MT_LEVEL

The compression level from 0 (no compression) to 9 (maximum compression)

Sys::Virt::Domain::MIGRATE_PARAM_COMPRESSION_XBZRLE_CACHE

The size of the cache for xbzrle compression

Sys::Virt::Domain::MIGRATE_PARAM_PERSIST_XML

The alternative persistent XML config to copy

Sys::Virt::Domain::MIGRATE_PARAM_AUTO_CONVERGE_INITIAL

The initial percentage to throttle guest vCPUs

Sys::Virt::Domain::MIGRATE_PARAM_AUTO_CONVERGE_INCREMENT

The additional percentage step size to throttle guest vCPUs if progress is not made

Sys::Virt::Domain::MIGRATE_PARAM_PARALLEL_CONNECTIONS

The number of connections used during parallel migration.

Sys::Virt::Domain::MIGRATE_PARAM_TLS_DESTINATION

Override the destination host name used for TLS verification. Normally the TLS certificate from the destination host must match the host's name for TLS verification to succeed. When the certificate does not match the destination hostname and the expected certificate's hostname is known, this parameter can be used to pass this expected hostname when starting the migration.

Sys::Virt::Domain::MIGRATE_PARAM_DISKS_URI

The URI to use for initializing the domain migration for storage. It takes a hypervisor specific format. The uri_transports element of the hypervisor capabilities XML includes details of the supported URI schemes. When omitted libvirt will auto-generate suitable default URI. It is typically only necessary to specify this URI if the destination host has multiple interfaces and a specific interface is required to transmit storage data.

Sys::Virt::Domain::MIGRATE_PARAM_ZLIB_LEVEL

The level of compression for zlib. Accepted values are in range 0-9. 0 is no compression, 1 is maximum speed and 9 is maximum compression.

Sys::Virt::Domain::MIGRATE_PARAM_ZSTD_LEVEL

The level of compression for zstd. Accepted values are in range 0-20. 0 is no compression, 1 is maximum speed and 20 is maximum compression.

$ddom = $dom->migrate(destcon, flags=0, dname=undef, uri=undef, bandwidth=0)

Migrate a domain to an alternative host. Use of positional parameters with migrate is deprecated in favour of passing a hash reference as described above.

$ddom = $dom->migrate2(destcon, dxml, flags, dname, uri, bandwidth)

Migrate a domain to an alternative host. This method is deprecated in favour of passing a hash ref to migrate.

$ddom = $dom->migrate_to_uri(desturi, \%params, flags=0)

Migrate a domain to an alternative host. The desturi parameter should be a valid libvirt connection URI for the remote target host. The flags parameter takes one or more of the Sys::Virt::Domain::MIGRATE_XXX constants described later in this document. The %params parameter is a hash reference used to set various parameters for the migration operation, with the same keys described for the migrate API.

$dom->migrate_to_uri(desturi, flags, dname, bandwidth)

Migrate a domain to an alternative host. Use of positional parameters with migrate_to_uri is deprecated in favour of passing a hash reference as described above.

$dom->migrate_to_uri2(dconnuri, miguri, dxml, flags, dname, bandwidth)

Migrate a domain to an alternative host. This method is deprecated in favour of passing a hash ref to migrate_to_uri.

$dom->migrate_set_max_downtime($downtime, $flags=0)

Set the maximum allowed downtime during migration of the guest. A longer downtime makes it more likely that migration will complete, at the cost of longer time blackout for the guest OS at the switch over point. The downtime parameter is measured in milliseconds. The $flags parameter is currently unused and defaults to zero.

$downtime = $dom->migrate_get_max_downtime($flags=0)

Get the current value of the maximum downtime allowed during a migration of a guest. The returned <downtime> value is measured in milliseconds. The $flags parameter is currently unused and defaults to zero.

$dom->migrate_set_max_speed($bandwidth, $flags=0)

Set the maximum allowed bandwidth during migration of the guest. The bandwidth parameter is measured in MB/second. The $flags parameter takes zero or more of the constants:

$Sys::Virt::Domain::MIGRATE_MAX_SPEED_POSTCOPY: Set the post-copy speed instead of the pre-copy speed.

$bandwidth = $dom->migrate_get_max_speed($flags=0)

Get the maximum allowed bandwidth during migration of the guest. The returned <bandwidth> value is measured in MB/second. The $flags parameter is accepts the same constants as migrate_set_max_speed.

$dom->migrate_set_compression_cache($cacheSize, $flags=0)

Set the maximum allowed compression cache size during migration of the guest. The cacheSize parameter is measured in bytes. The $flags parameter is currently unused and defaults to zero.

$cacheSize = $dom->migrate_get_compression_cache($flags=0)

Get the maximum allowed compression cache size during migration of the guest. The returned <bandwidth> value is measured in bytes. The $flags parameter is currently unused and defaults to zero.

$dom->migrate_start_post_copy($flags=0)

Switch the domain from pre-copy to post-copy mode. This requires that the original migrate command had the Sys::Virt::Domain::MIGRATE_POST_COPY flag specified.

$dom->inject_nmi($flags)

Trigger an NMI in the guest virtual machine. The $flags parameter is currently unused and defaults to 0.

$dom->open_console($st, $devname, $flags)

Open the text console for a serial, parallel or paravirt console device identified by $devname, connecting it to the stream $st. If $devname is undefined, the default console will be opened. $st must be a Sys::Virt::Stream object used for bi-directional communication with the console. $flags is currently unused, defaulting to 0.

$dom->open_channel($st, $devname, $flags)

Open the text console for a data channel device identified by $devname, connecting it to the stream $st. $st must be a Sys::Virt::Stream object used for bi-directional communication with the channel. $flags is currently unused, defaulting to 0.

$dom->open_graphics($idx, $fd, $flags)

Open the graphics console for a guest, identified by $idx, counting from 0. The $fd should be a file descriptor for an anonymous socket pair. The $flags argument should be one of the constants listed at the end of this document, and defaults to 0.

$fd = $dom->open_graphics_fd($idx, $flags)

Open the graphics console for a guest, identified by $idx, counting from 0. The $flags argument should be one of the constants listed at the end of this document, and defaults to 0. The return value will be a file descriptor connected to the console which must be closed when no longer needed. This method is preferred over open_graphics since it will work correctly under sVirt mandatory access control policies.

my $mimetype = $dom->screenshot($st, $screen, $flags)

Capture a screenshot of the virtual machine's monitor. The $screen parameter controls which monitor is captured when using a multi-head or multi-card configuration. $st must be a Sys::Virt::Stream object from which the data can be read. $flags is currently unused and defaults to 0. The mimetype of the screenshot is returned

@vcpuinfo = $dom->get_vcpu_info($flags=0)

Obtain information about the state of all virtual CPUs in a running guest domain. The returned list will have one element for each vCPU, where each elements contains a hash reference. The keys in the hash are, number the vCPU number, cpu the physical CPU on which the vCPU is currently scheduled, cpuTime the cumulative execution time of the vCPU, state the running state and affinity giving the allowed scheduler placement. The value for affinity is a string representing a bitmask against physical CPUs, 8 cpus per character. To extract the bits use the unpack function with the b* template. NB The state, cpuTime, cpu values are only available if using $flags value of 0, and the domain is currently running; otherwise they will all be set to zero.

$dom->pin_vcpu($vcpu, $mask)

Pin the virtual CPU given by index $vcpu to physical CPUs given by $mask. The $mask is a string representing a bitmask against physical CPUs, 8 cpus per character.

$mask = $dom->get_emulator_pin_info()

Obtain information about the CPU affinity of the emulator process. The returned $mask is a bitstring against physical CPUs, 8 cpus per character. To extract the bits use the unpack function with the b* template.

$dom->pin_emulator($newmask, $flags=0)

Pin the emulator threads to the physical CPUs identified by the affinity in $newmask. The $newmask is a bitstring against the physical CPUa, 8 cpus per character. To create a suitable bitstring, use the vec function with a value of 1 for the BITS parameter.

@iothreadinfo = $dom->get_iothread_info($flags=0)

Obtain information about the state of all IOThreads in a running guest domain. The returned list will have one element for each IOThread, where each elements contains a hash reference. The keys in the hash are, number the IOThread number and affinity giving the allowed scheduler placement. The value for affinity is a string representing a bitmask against physical CPUs, 8 cpus per character. To extract the bits use the unpack function with the b* template.

$dom->pin_iothread($iothread, $mask)

Pin the IOThread given by index $iothread to physical CPUs given by $mask. The $mask is a string representing a bitmask against physical CPUs, 8 cpus per character.

$dom->add_iothread($iothread, $flags=0)

Add a new IOThread by the $iothread value to the guest domain. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->del_iothread($iothread, $flags=0)

Delete an existing IOThread by the $iothread value from the guest domain. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

$dom->set_iothread($iothread, $params, $flags=0)

Set parameters for the IOThread by the $iothread value on the guest domain. The $params parameter is a hash reference whose keys are the IOTHREAD STATS constants documented later. The $flags parameter accepts one or more the CONFIG OPTION constants documented later, and defaults to 0 if omitted.

my @stats = $dom->get_cpu_stats($startCpu, $numCpus, $flags=0)

Requests the guests host physical CPU usage statistics, starting from host CPU <$startCpu> counting up to $numCpus. If $startCpu is -1 and $numCpus is 1, then the utilization across all CPUs is returned. Returns an array of hash references, each element containing stats for one CPU.

my $info = $dom->get_job_info()

Returns a hash reference summarising the execution state of the background job. The elements of the hash are as follows:

type: The type of job, one of the JOB TYPE constants listed later in this document.
timeElapsed: The elapsed time in milliseconds
timeRemaining: The expected remaining time in milliseconds. Only set if the type is JOB_UNBOUNDED.
dataTotal: The total amount of data expected to be processed by the job, in bytes.
dataProcessed: The current amount of data processed by the job, in bytes.
dataRemaining: The expected amount of data remaining to be processed by the job, in bytes.
memTotal: The total amount of memory expected to be processed by the job, in bytes.
memProcessed: The current amount of memory processed by the job, in bytes.
memRemaining: The expected amount of memory remaining to be processed by the job, in bytes.
fileTotal: The total amount of file expected to be processed by the job, in bytes.
fileProcessed: The current amount of file processed by the job, in bytes.
fileRemaining: The expected amount of file remaining to be processed by the job, in bytes.

my ($type, $stats) = $dom->get_job_stats($flags=0)

Returns an array summarising the execution state of the background job. The $type value is one of the JOB TYPE constants listed later in this document. The $stats value is a hash reference, whose elements are one of the following constants.

type

The type of job, one of the JOB TYPE constants listed later in this document.

The $flags parameter defaults to zero and can take one of the following constants.

Sys::Virt::Domain::JOB_STATS_COMPLETED: Return the stats of the most recently completed job.
Sys::Virt::Domain::JOB_STATS_KEEP_COMPLETED: Don't clear the completed stats after reading them.

Sys::Virt::Domain::JOB_TIME_ELAPSED

The elapsed time in milliseconds

Sys::Virt::Domain::JOB_TIME_ELAPSED_NET

Time in milliseconds since the beginning of the migration job NOT including the time required to transfer control flow from the source host to the destination host.

Sys::Virt::Domain::JOB_TIME_REMAINING

The expected remaining time in milliseconds. Only set if the type is JOB_UNBOUNDED.

Sys::Virt::Domain::JOB_DATA_TOTAL

The total amount of data expected to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_DATA_PROCESSED

The current amount of data processed by the job, in bytes.

Sys::Virt::Domain::JOB_DATA_REMAINING

The expected amount of data remaining to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_MEMORY_TOTAL

The total amount of memory expected to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_MEMORY_PROCESSED

The current amount of memory processed by the job, in bytes.

Sys::Virt::Domain::JOB_MEMORY_REMAINING

The expected amount of memory remaining to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_MEMORY_CONSTANT

The number of pages filled with a constant byte which have been transferred

Sys::Virt::Domain::JOB_MEMORY_NORMAL

The number of pages transferred without any compression

Sys::Virt::Domain::JOB_MEMORY_NORMAL_BYTES

The number of bytes transferred without any compression

Sys::Virt::Domain::JOB_MEMORY_BPS

The bytes per second transferred

Sys::Virt::Domain::JOB_MEMORY_DIRTY_RATE

The number of memory pages dirtied per second

Sys::Virt::Domain::JOB_MEMORY_PAGE_SIZE

The memory page size in bytes

Sys::Virt::Domain::JOB_MEMORY_ITERATION

The total number of iterations over guest memory

Sys::Virt::Domain::JOB_MEMORY_POSTCOPY_REQS

The number of page requests received from the destination host during post-copy migration.

Sys::Virt::Domain::JOB_DISK_TOTAL

The total amount of file expected to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_DISK_PROCESSED

The current amount of file processed by the job, in bytes.

Sys::Virt::Domain::JOB_DISK_REMAINING

The expected amount of file remaining to be processed by the job, in bytes.

Sys::Virt::Domain::JOB_DISK_BPS

The bytes per second transferred

Sys::Virt::Domain::JOB_AUTO_CONVERGE_THROTTLE

The percentage by which vCPUs are currently throttled

Sys::Virt::Domain::JOB_COMPRESSION_CACHE

The size of the compression cache in bytes

Sys::Virt::Domain::JOB_COMPRESSION_BYTES

The number of compressed bytes transferred

Sys::Virt::Domain::JOB_COMPRESSION_PAGES

The number of compressed pages transferred

Sys::Virt::Domain::JOB_COMPRESSION_CACHE_MISSES

The number of changing pages not in compression cache

Sys::Virt::Domain::JOB_COMPRESSION_OVERFLOW

The number of changing pages in the compression cache but sent uncompressed since the compressed page was larger than the non-compressed page.

Sys::Virt::Domain::JOB_DOWNTIME

The number of milliseconds of downtime expected during migration switchover.

Sys::Virt::Domain::JOB_DOWNTIME_NET

Real measured downtime (ms) NOT including the time required to transfer control flow from the source host to the destination host.

Sys::Virt::Domain::JOB_SETUP_TIME

The number of milliseconds of time doing setup of the job

Sys::Virt::Domain::JOB_OPERATION

The type of operation associated with the job

Sys::Virt::Domain::JOB_SUCCESS

Whether the job was successfully completed.

Sys::Virt::Domain::JOB_DISK_TEMP_TOTAL

Possible total temporary disk space for the job in bytes

Sys::Virt::Domain::JOB_DISK_TEMP_USED

Current total temporary disk space for the job in bytes

Sys::Virt::Domain::JOB_ERRMSG

The error message from a failed job

The values for the Sys::Virt::Domain::JOB_OPERATION field are

Sys::Virt::Domain::JOB_OPERATION_UNKNOWN: No known job type
Sys::Virt::Domain::JOB_OPERATION_START: The guest is starting
Sys::Virt::Domain::JOB_OPERATION_SAVE: The guest is saving to disk
Sys::Virt::Domain::JOB_OPERATION_RESTORE: The guest is restoring from disk
Sys::Virt::Domain::JOB_OPERATION_MIGRATION_IN: The guest is migrating in from another host
Sys::Virt::Domain::JOB_OPERATION_MIGRATION_OUT: The guest is migrating out to another host
Sys::Virt::Domain::JOB_OPERATION_SNAPSHOT: The guest is saving a snapshot
Sys::Virt::Domain::JOB_OPERATION_SNAPSHOT_REVERT: The guest is reverting to a snapshot
Sys::Virt::Domain::JOB_OPERATION_DUMP: The guest is saving a crash dump
Sys::Virt::Domain::JOB_OPERATION_BACKUP: The guest is performing a block backup
Sys::Virt::Domain::JOB_OPERATION_SNAPSHOT_DELETE: The guest is deleting a snapshot

$dom->abort_job($flags=0)

Aborts the currently executing job. Valid $flags include:

Sys::Virt::Domain::DOMAIN_ABORT_JOB_POSTCOPY: Interrupt post-copy migration. It can later be resumed using migrate APIs with MIGRATE_POSTCOPY_RESUME flag.

my $info = $dom->get_block_job_info($path, $flags=0)

Returns a hash reference summarising the execution state of the block job. The $path parameter should be the fully qualified path of the block device being changed. Valid $flags include:

Sys::Virt::Domain::BLOCK_JOB_INFO_BANDWIDTH_BYTES: Treat bandwidth value as bytes instead of MiB.

$dom->set_block_job_speed($path, $bandwidth, $flags=0)

Change the maximum I/O bandwidth used by the block job that is currently executing for $path. The $bandwidth argument is specified in MB/s. The $flags parameter can take the bitwise union of the values:

Sys::Virt::Domain::BLOCK_JOB_SPEED_BANDWIDTH_BYTES: The $bandwidth parameter value is measured in bytes/s instead of MB/s.

$dom->abort_block_job($path, $flags=0)

Abort the current job that is executing for the block device associated with $path

$dom->block_pull($path, $bandwidth, $flags=0)

Merge the backing files associated with $path into the top level file. The $bandwidth parameter specifies the maximum I/O rate to allow in MB/s. The $flags parameter can take the bitwise union of the values:

Sys::Virt::Domain::BLOCK_PULL_BANDWIDTH_BYTES: The $bandwidth parameter value is measured in bytes/s instead of MB/s.

$dom->block_rebase($path, $base, $bandwidth, $flags=0)

Switch the backing path associated with $path to instead use $base. The $bandwidth parameter specifies the maximum I/O rate to allow in MB/s. The $flags parameter can take the bitwise union of the values:

Sys::Virt::Domain::BLOCK_REBASE_BANDWIDTH_BYTES: The $bandwidth parameter value is measured in bytes/s instead of MB/s.

$dom->block_copy($path, $destxml, $params, $flags=0)

Copy contents of a disk image <$path> into the target volume described by $destxml which follows the schema of the <disk> element in the domain XML. The $params parameter is a hash of optional parameters to control the process

Sys::Virt::Domain::BLOCK_COPY_BANDWIDTH: The maximum bandwidth in bytes per second.
Sys::Virt::Domain::BLOCK_COPY_GRANULARITY: The granularity in bytes of the copy process
Sys::Virt::Domain::BLOCK_COPY_BUF_SIZE: The maximum amount of data in flight in bytes.

$dom->block_commit($path, $base, $top, $bandwidth, $flags=0)

Commit changes there were made to the temporary top level file $top. Takes all the differences between $top and $base and merge them into $base. The $bandwidth parameter specifies the maximum I/O rate to allow in MB/s. The $flags parameter can take the bitwise union of the values:

Sys::Virt::Domain::BLOCK_COMMIT_BANDWIDTH_BYTES: The $bandwidth parameter value is measured in bytes instead of MB/s.

$count = $dom->num_of_snapshots()

Return the number of saved snapshots of the domain

@names = $dom->list_snapshot_names()

List the names of all saved snapshots. The names can be used with the lookup_snapshot_by_name

@snapshots = $dom->list_snapshots()

Return a list of all snapshots currently known to the domain. The elements in the returned list are instances of the Sys::Virt::DomainSnapshot class. This method requires O(n) RPC calls, so the list_all_snapshots method is recommended as a more efficient alternative.

my @snapshots = $dom->list_all_snapshots($flags)

Return a list of all domain snapshots associated with this domain. The elements in the returned list are instances of the Sys::Virt::DomainSnapshot class. The $flags parameter can be used to filter the list of return domain snapshots.

my $snapshot = $dom->get_snapshot_by_name($name)

Return the domain snapshot with a name of $name. The returned object is an instance of the Sys::Virt::DomainSnapshot class.

$dom->has_current_snapshot()

Returns a true value if the domain has a currently active snapshot

$snapshot = $dom->current_snapshot()

Returns the currently active snapshot for the domain.

$snapshot = $dom->create_snapshot($xml[, $flags])

Create a new snapshot from the $xml. The $flags parameter accepts the SNAPSHOT CREATION constants listed in Sys::Virt::DomainSnapshots.

my @checkpoints = $dom->list_all_checkpoints($flags)

Return a list of all domain checkpoints associated with this domain. The elements in the returned list are instances of the Sys::Virt::DomainCheckpoint class. The $flags parameter can be used to filter the list of return domain checkpoints.

my $checkpoint = $dom->get_checkpoint_by_name($name)

Return the domain checkpoint with a name of $name. The returned object is an instance of the Sys::Virt::DomainCheckpoint class.

$checkpoint = $dom->create_checkpoint($xml[, $flags])

Create a new checkpoint from the $xml. The $flags parameter accepts the CHECKPOINT CREATION constants listed in Sys::Virt::DomainCheckpoints.

$dom->backup_begin($backupxml, $checkpointxml=undef, $flags=0);

Start a point-in-time backup job for the specified disks of a running domain. The $backupxml parameter describes the backup operation, including which disks to use. The optional $checkpointxml parameter can be used to create a checkpoint covering to the same point in time as the backup. The optional $flags parameter can be one of the following constants:

Sys::Virt::Domain::BACKUP_BEGIN_REUSE_EXTERNAL: Assume that the output/temporary files for the backup have been precreated by the caller with the correct size and format.

$xml = $dom->backup_get_xml_description($flags=0);

Get the XML description of the currently executing backup job. If there is no backup job then an error is raised.

$dom->fs_trim($mountPoint, $minimum, $flags=0);

Issue an FS_TRIM command to the device at $mountPoint to remove chunks of unused space that are at least $minimum bytes in length. $flags is currently unused and defaults to zero.

$dom->fs_freeze(\@mountPoints, $flags=0);

Freeze all the filesystems associated with the @mountPoints array reference. If <@mountPoints> is an empty list, then all filesystems will be frozen. $flags is currently unused and defaults to zero.

$dom->fs_thaw(\@mountPoints, $flags=0);

Thaw all the filesystems associated with the @mountPoints array reference. If <@mountPoints> is an empty list, then all filesystems will be thawed. $flags is currently unused and defaults to zero.

@fslist = $dom->get_fs_info($flags=0);

Obtain a list of all guest filesystems. The returned list will contain one element for each filesystem, whose value will be a hash reference with the following keys

name: The name of the guest device that is mounted
fstype: The filesystem type (e.g. 'ext4', 'fat', 'ntfs', etc)
mountpoint: The location in the filesystem tree of the mount
devalias: An array reference containing list of device aliases associated with the guest device. The device aliases correspond to disk target names in the guest XML configuration

@nics = $dom->get_interface_addresses($src, $flags=0);

Obtain a list of all guest network interfaces. The $src parameter is one of the constants

Sys::Virt::Domain::INTERFACE_ADDRESSES_SRC_LEASE: Extract the DHCP server lease information
Sys::Virt::Domain::INTERFACE_ADDRESSES_SRC_AGENT: Query the guest OS via an agent
Sys::Virt::Domain::INTERFACE_ADDRESSES_SRC_ARP: Extract from the local ARP tables

The returned list will contain one element for each interface. The values in the list will be a hash reference with the following keys

name

The name of the guest interface that is mounted

hwaddr

The hardware address, aka MAC, if available.

addrs

An array reference containing list of IP addresses associated with the guest NIC. Each element in the array is a further hash containing

addr: The IP address string
prefix: The IP address network prefix
type: The IP address type (IPv4 vs IPv6)

$dom->send_process_signal($pid, $signum, $flags=0);

Send the process $pid the signal $signum. The $signum value must be one of the constants listed later, not a POSIX or Linux signal value. $flags is currently unused and defaults to zero.

$dom->set_block_threshold($dev, $threshold, $flags=0);

Set the threshold level for delivering the EVENT_ID_BLOCK_THRESHOLD if the device or backing chain element described by $dev is written beyond the set $threshold level. The threshold level is unset once the event fires. The event might not be delivered at all if libvirtd was not running at the moment when the threshold was reached.

$dom->set_lifecycle_action($type, $action, $flags=0)

Changes the actions of lifecycle events for domain represented as <on_$type>$action</on_$type> in the domain XML.

$info = $dom->get_launch_security_info($flags=0)

Get information about the domain launch security policy. $flags is currently unused and defaults to zero. The returned hash may contain the following keys

Sys::Virt::Domain::LAUNCH_SECURITY_SEV_MEASUREMENT: The AMD SEV launch measurement
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_API_MAJOR: The host SEV API major version
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_API_MINOR: The host SEV API minor version
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_BUILD_ID: The host SEV firmware build ID
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_POLICY: The guest SEV policy

$dom->set_launch_security_state(\%params, $flags=0)

Set information about the domain launch security state. $flags is currently unused and defaults to zero. The provided hash may contain the following keys

Sys::Virt::Domain::LAUNCH_SECURITY_SEV_SECRET: The SEV secret string to inject
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_SECRET_HEADER: The SEV secret header string to inject
Sys::Virt::Domain::LAUNCH_SECURITY_SEV_SECRET_SET_ADDRESS: The address at which to inject the SEV secret. If omitted it can be automatically determined from the firmware

$info = $dom->get_guest_info($types, $flags=0)

Get information about the domain guest configuration. The $types parameter determines what pieces of information are returned and should be the bitwise or of the following constants:

Sys::Virt::Domain::GUEST_INFO_USERS: Active user information
Sys::Virt::Domain::GUEST_INFO_OS: Misc operating system information
Sys::Virt::Domain::GUEST_INFO_TIMEZONE: The guest timezone
Sys::Virt::Domain::GUEST_INFO_HOSTNAME: The guest hostname
Sys::Virt::Domain::GUEST_INFO_FILESYSTEM: Filesystem mount information
Sys::Virt::Domain::GUEST_INFO_DISKS: Block device information
Sys::Virt::Domain::GUEST_INFO_INTERFACES: Network interfaces information

$flags is currently unused and defaults to zero.

$dom->set_agent_response_timeout($timeout, $flags=0)

Set the amount of time to wait for the agent to respond to a command. $timeout is a positive integer representing the number of seconds to wait, or one of the constants:

Sys::Virt::Domain::AGENT_RESPONSE_TIMEOUT_BLOCK: Wait forever with no timeout
Sys::Virt::Domain::AGENT_RESPONSE_TIMEOUT_NOWAIT: Don't want at all, return immediately
Sys::Virt::Domain::AGENT_RESPONSE_TIMEOUT_DEFAULT: Use the hypervisor driver's default timeout

The $flags parameter is currently unused and defaults to zero.

my @keys = $dom->authorized_ssh_keys_get($user, $flags=0)

Retrieve the list of authorized SSH keys for the user account $user. The $flags parameter is currently unused and defaults to zero.

$dom->authorized_ssh_keys_set($user, \@keys, $flags=0)

Update the list of authorized SSH keys for the user account $user. The @keys parameter should be an array reference containing the new keys, if any. The default behaviour is to set the authorized SSH keys to the exact set specified in @keys. This can be modified via the $flags parameter which takes the following constants

Sys::Virt::Domain::AUTHORIZED_SSH_KEYS_SET_APPEND: Append @keys to the current set of keys, rather than replacing the existing keys.
Sys::Virt::Domain::AUTHORIZED_SSH_KEYS_SET_REMOVE: Remove @keys from the current set of keys, rather than replacing the existing keys. It is not an error if the keys do not exist.

my @msgs = $dom->get_messages($flags=0)

Retrieve a list of messages associated with the domain. The optional $flags parameter can accept zero or more of

Sys::Virt::Domain::MESSAGE_DEPRECATION: Warnings about use of deprecated features
Sys::Virt::Domain::MESSAGE_TAINTING: Warnings about actions that have tainting the domain

$dom->start_dirty_rate_calc($dom, $secs, $flags=0)

Request calculation of the domain's memory dirty rate over the next $secs seconds. $flags accepts one or more of

Sys::Virt::Domain::DIRTYRATE_MODE_PAGE_SAMPLING: Page sampling mode
Sys::Virt::Domain::DIRTYRATE_MODE_DIRTY_BITMAP: Dirty bitmap mode
Sys::Virt::Domain::DIRTYRATE_MODE_DIRTY_RING: Dirty ring mode

$dom->fd_associate($name, \@fds, $flags=0)

Associate a set of file descriptors in @fds with the domain, giving them the name $name. If $flags is non-zero, it can take one or more of:

Sys::Virt::Domain::FD_ASSOCIATE_SECLABEL_RESTORE: Attempt to restore the label when shutting down
Sys::Virt::Domain::FD_ASSOCIATE_SECLABEL_WRITABLE: Label the FD to permit the guest to write to it.

CONSTANTS

A number of the APIs take a flags parameter. In most cases passing a value of zero will be satisfactory. Some APIs, however, accept named constants to alter their behaviour. This section documents the current known constants.

DOMAIN STATE

The domain state constants are useful in interpreting the state key in the hash returned by the get_info method.

Sys::Virt::Domain::STATE_NOSTATE: The domain is active, but is not running / blocked (e.g. idle)
Sys::Virt::Domain::STATE_RUNNING: The domain is active and running
Sys::Virt::Domain::STATE_BLOCKED: The domain is active, but execution is blocked
Sys::Virt::Domain::STATE_PAUSED: The domain is active, but execution has been paused
Sys::Virt::Domain::STATE_SHUTDOWN: The domain is active, but in the shutdown phase
Sys::Virt::Domain::STATE_SHUTOFF: The domain is inactive, and shut down.
Sys::Virt::Domain::STATE_CRASHED: The domain is inactive, and crashed.
Sys::Virt::Domain::STATE_PMSUSPENDED: The domain is active, but in power management suspend state

CONTROL INFO

The following constants can be used to determine what the guest domain control channel status is

Sys::Virt::Domain::CONTROL_ERROR: The control channel has a fatal error
Sys::Virt::Domain::CONTROL_OK: The control channel is ready for jobs
Sys::Virt::Domain::CONTROL_OCCUPIED: The control channel is busy
Sys::Virt::Domain::CONTROL_JOB: The control channel is busy with a job

If the status is Sys::Virt::Domain::CONTROL_ERROR, then one of the following constants describes the reason

Sys::Virt::Domain::CONTROL_ERROR_REASON_NONE: There is no reason for the error available
Sys::Virt::Domain::CONTROL_ERROR_REASON_UNKNOWN: The reason for the error is unknown
Sys::Virt::Domain::CONTROL_ERROR_REASON_INTERNAL: There was an internal error in libvirt
Sys::Virt::Domain::CONTROL_ERROR_REASON_MONITOR: There was an error speaking to the monitor

DOMAIN CREATION

The following constants can be used to control the behaviour of domain creation

Sys::Virt::Domain::START_PAUSED: Keep the guest vCPUs paused after starting the guest
Sys::Virt::Domain::START_AUTODESTROY: Automatically destroy the guest when the connection is closed (or fails)
Sys::Virt::Domain::START_BYPASS_CACHE: Do not use OS I/O cache if starting a domain with a saved state image
Sys::Virt::Domain::START_FORCE_BOOT: Boot the guest, even if there was a saved snapshot
Sys::Virt::Domain::START_VALIDATE: Validate the XML document against the XML schema
Sys::Virt::Domain::START_RESET_NVRAM: Reset the firmware NVRAM state from its original template

DOMAIN DEFINE

The following constants can be used to control the behaviour of domain define operations

Sys::Virt::Domain::DEFINE_VALIDATE: Validate the XML document against the XML schema

KEYCODE SETS

The following constants define the set of supported keycode sets

Sys::Virt::Domain::KEYCODE_SET_LINUX: The Linux event subsystem keycodes
Sys::Virt::Domain::KEYCODE_SET_XT: The original XT keycodes
Sys::Virt::Domain::KEYCODE_SET_ATSET1: The AT Set1 keycodes (aka XT)
Sys::Virt::Domain::KEYCODE_SET_ATSET2: The AT Set2 keycodes (aka AT)
Sys::Virt::Domain::KEYCODE_SET_ATSET3: The AT Set3 keycodes (aka PS2)
Sys::Virt::Domain::KEYCODE_SET_OSX: The OS-X keycodes
Sys::Virt::Domain::KEYCODE_SET_XT_KBD: The XT keycodes from the Linux Keyboard driver
Sys::Virt::Domain::KEYCODE_SET_USB: The USB HID keycode set
Sys::Virt::Domain::KEYCODE_SET_WIN32: The Windows keycode set
Sys::Virt::Domain::KEYCODE_SET_QNUM: The XT keycode set, with the extended scancodes using the high bit of the first byte, instead of the low bit of the second byte.
Sys::Virt::Domain::KEYCODE_SET_RFB: A deprecated alias for Sys::Virt::Domain::KEYCODE_SET_QNUM

MEMORY PEEK

The following constants can be used with the memory_peek method's flags parameter

Sys::Virt::Domain::MEMORY_VIRTUAL: Indicates that the offset is using virtual memory addressing.
Sys::Virt::Domain::MEMORY_PHYSICAL: Indicates that the offset is using physical memory addressing.

VCPU STATE

The following constants are useful when interpreting the virtual CPU run state

Sys::Virt::Domain::VCPU_OFFLINE: The virtual CPU is not online
Sys::Virt::Domain::VCPU_RUNNING: The virtual CPU is executing code
Sys::Virt::Domain::VCPU_BLOCKED: The virtual CPU is waiting to be scheduled

VCPU HOST PLACEMENT STATE

The following constants are useful when interpreting the virtual CPU host placement

Sys::Virt::Domain::VCPU_INFO_CPU_OFFLINE: The virtual CPU is not online
Sys::Virt::Domain::VCPU_INFO_CPU_UNAVAILABLE: The virtual CPU placement is not available from this hypervisor

OPEN GRAPHICS CONSTANTS

The following constants are used when opening a connection to the guest graphics server

Sys::Virt::Domain::OPEN_GRAPHICS_SKIPAUTH: Skip authentication of the client

OPEN CONSOLE CONSTANTS

The following constants are used when opening a connection to the guest console

Sys::Virt::Domain::OPEN_CONSOLE_FORCE: Force opening of the console, disconnecting any other open session
Sys::Virt::Domain::OPEN_CONSOLE_SAFE: Check if the console driver supports safe operations

OPEN CHANNEL CONSTANTS

The following constants are used when opening a connection to the guest channel

Sys::Virt::Domain::OPEN_CHANNEL_FORCE: Force opening of the channel, disconnecting any other open session

XML DUMP OPTIONS

The following constants are used to control the information included in the XML configuration dump

Sys::Virt::Domain::XML_INACTIVE: Report the persistent inactive configuration for the guest, even if it is currently running.
Sys::Virt::Domain::XML_SECURE: Include security sensitive information in the XML dump, such as passwords.
Sys::Virt::Domain::XML_UPDATE_CPU: Update the CPU model definition to match the current executing state.
Sys::Virt::Domain::XML_MIGRATABLE: Update the XML to allow migration to older versions of libvirt

DEVICE HOTPLUG OPTIONS

The following constants are used to control device hotplug operations

Sys::Virt::Domain::DEVICE_MODIFY_CURRENT: Modify the domain in its current state
Sys::Virt::Domain::DEVICE_MODIFY_LIVE: Modify only the live state of the domain
Sys::Virt::Domain::DEVICE_MODIFY_CONFIG: Modify only the persistent config of the domain
Sys::Virt::Domain::DEVICE_MODIFY_FORCE: Force the device to be modified

MEMORY OPTIONS

The following constants are used to control memory change operations

Sys::Virt::Domain::MEM_CURRENT: Modify the current state
Sys::Virt::Domain::MEM_LIVE: Modify only the live state of the domain
Sys::Virt::Domain::MEM_CONFIG: Modify only the persistent config of the domain
Sys::Virt::Domain::MEM_MAXIMUM: Modify the maximum memory value

CONFIG OPTIONS

The following constants are used to control what configuration a domain update changes

Sys::Virt::Domain::AFFECT_CURRENT: Modify the current state
Sys::Virt::Domain::AFFECT_LIVE: Modify only the live state of the domain
Sys::Virt::Domain::AFFECT_CONFIG: Modify only the persistent config of the domain

MIGRATE OPTIONS

The following constants are used to control how migration is performed

Sys::Virt::Domain::MIGRATE_LIVE: Migrate the guest without interrupting its execution on the source host.
Sys::Virt::Domain::MIGRATE_PEER2PEER: Manage the migration process over a direct peer-2-peer connection between the source and destination host libvirtd daemons.
Sys::Virt::Domain::MIGRATE_TUNNELLED: Tunnel the migration data over the libvirt daemon connection, rather than the native hypervisor data transport. Requires PEER2PEER flag to be set.
Sys::Virt::Domain::MIGRATE_PERSIST_DEST: Make the domain persistent on the destination host, defining its configuration file upon completion of migration.
Sys::Virt::Domain::MIGRATE_UNDEFINE_SOURCE: Remove the domain's persistent configuration after migration completes successfully.
Sys::Virt::Domain::MIGRATE_PAUSED: Do not re-start execution of the guest CPUs on the destination host after migration completes.
Sys::Virt::Domain::MIGRATE_NON_SHARED_DISK: Copy the complete contents of the disk images during migration
Sys::Virt::Domain::MIGRATE_NON_SHARED_INC: Copy the incrementally changed contents of the disk images during migration
Sys::Virt::Domain::MIGRATE_CHANGE_PROTECTION: Do not allow changes to the virtual domain configuration while migration is taking place. This option is automatically implied if doing a peer-2-peer migration.
Sys::Virt::Domain::MIGRATE_UNSAFE: Migrate even if the compatibility check indicates the migration will be unsafe to the guest.
Sys::Virt::Domain::MIGRATE_OFFLINE: Migrate the guest config if the guest is not currently running
Sys::Virt::Domain::MIGRATE_COMPRESSED: Enable compression of the migration data stream
Sys::Virt::Domain::MIGRATE_ABORT_ON_ERROR: Abort if an I/O error occurs on the disk
Sys::Virt::Domain::MIGRATE_AUTO_CONVERGE: Force convergence of the migration operation by throttling guest runtime
Sys::Virt::Domain::MIGRATE_RDMA_PIN_ALL: Pin memory for RDMA transfer
Sys::Virt::Domain::MIGRATE_POSTCOPY: Enable support for post-copy migration
Sys::Virt::Domain::MIGRATE_TLS: Setting this flag will cause the migration to attempt to use the TLS environment configured by the hypervisor in order to perform the migration. If incorrectly configured on either source or destination, the migration will fail.
Sys::Virt::Domain::MIGRATE_PARALLEL: Send memory pages to the destination host through several network connections. See Sys::Virt::Domain::MIGRATE_PARAM_PARALLEL_* parameters for configuring the parallel migration.
Sys::Virt::Domain::MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES: Force the guest writes which happen when copying disk images for non-shared storage migration to be synchronously written to the destination. This ensures the storage migration converges for VMs doing heavy I/O on fast local storage and slow mirror.
Sys::Virt::Domain::MIGRATE_POSTCOPY_RESUME: Resume migration which failed in post-copy phase.
Sys::Virt::Domain::MIGRATE_ZEROCOPY: Attempt to avoid copying data. This is a request, not a guarantee and may apply to either one or both directions of data transfer at discretion of the hypervisor implementation.

UNDEFINE CONSTANTS

The following constants can be used when undefining virtual domain configurations

Sys::Virt::Domain::UNDEFINE_MANAGED_SAVE: Also remove any managed save image when undefining the virtual domain
Sys::Virt::Domain::UNDEFINE_SNAPSHOTS_METADATA: Also remove any snapshot metadata when undefining the virtual domain.
Sys::Virt::Domain::UNDEFINE_NVRAM: Also remove any NVRAM state file when undefining the virtual domain.
Sys::Virt::Domain::UNDEFINE_KEEP_NVRAM: keep NVRAM state file when undefining the virtual domain.
Sys::Virt::Domain::UNDEFINE_CHECKPOINTS_METADATA: Also remove any checkpoint metadata when undefining the virtual domain.
Sys::Virt::Domain::UNDEFINE_TPM: Also remove any TPM state when undefining the virtual domain.
Sys::Virt::Domain::UNDEFINE_KEEP_TPM: Keep TPM state when undefining the virtual domain.

JOB TYPES

The following constants describe the different background job types.

Sys::Virt::Domain::JOB_NONE: No job is active
Sys::Virt::Domain::JOB_BOUNDED: A job with a finite completion time is active
Sys::Virt::Domain::JOB_UNBOUNDED: A job with an unbounded completion time is active
Sys::Virt::Domain::JOB_COMPLETED: The job has finished, but isn't cleaned up
Sys::Virt::Domain::JOB_FAILED: The job has hit an error, but isn't cleaned up
Sys::Virt::Domain::JOB_CANCELLED: The job was aborted at user request, but isn't cleaned up

MEMORY PARAMETERS

The following constants are useful when getting/setting memory parameters for guests

Sys::Virt::Domain::MEMORY_HARD_LIMIT: The maximum memory the guest can use.
Sys::Virt::Domain::MEMORY_SOFT_LIMIT: The memory upper limit enforced during memory contention.
Sys::Virt::Domain::MEMORY_MIN_GUARANTEE: The minimum memory guaranteed to be reserved for the guest.
Sys::Virt::Domain::MEMORY_SWAP_HARD_LIMIT: The maximum swap the guest can use.
Sys::Virt::Domain::MEMORY_PARAM_UNLIMITED: The value of an unlimited memory parameter

BLKIO PARAMETERS

The following parameters control I/O tuning for the domain as a whole

Sys::Virt::Domain::BLKIO_WEIGHT: The I/O weight parameter
Sys::Virt::Domain::BLKIO_DEVICE_WEIGHT: The per-device I/O weight parameter
Sys::Virt::Domain::BLKIO_DEVICE_READ_BPS: The per-device I/O bytes read per second
Sys::Virt::Domain::BLKIO_DEVICE_READ_IOPS: The per-device I/O operations read per second
Sys::Virt::Domain::BLKIO_DEVICE_WRITE_BPS: The per-device I/O bytes write per second
Sys::Virt::Domain::BLKIO_DEVICE_WRITE_IOPS: The per-device I/O operations write per second

BLKIO TUNING PARAMETERS

The following parameters control I/O tuning for an individual guest disk.

Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_BYTES_SEC: The total bytes processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_BYTES_SEC: The bytes read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_BYTES_SEC: The bytes written per second.
Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_IOPS_SEC: The total I/O operations processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_IOPS_SEC: The I/O operations read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_IOPS_SEC: The I/O operations written per second.
Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_BYTES_SEC_MAX: The maximum total bytes processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_BYTES_SEC_MAX: The maximum bytes read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_BYTES_SEC_MAX: The maximum bytes written per second.
Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_IOPS_SEC_MAX: The maximum total I/O operations processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_IOPS_SEC_MAX: The maximum I/O operations read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_IOPS_SEC_MAX: The maximum I/O operations written per second.
Sys::Virt::Domain::BLOCK_IOTUNE_SIZE_IOPS_SEC: The maximum I/O operations per second
Sys::Virt::Domain::BLOCK_IOTUNE_GROUP_NAME: A string representing a group name to allow sharing of I/O throttling quota between multiple drives
Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum total bytes processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum bytes read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum bytes written per second.
Sys::Virt::Domain::BLOCK_IOTUNE_TOTAL_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum total I/O operations processed per second.
Sys::Virt::Domain::BLOCK_IOTUNE_READ_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum I/O operations read per second.
Sys::Virt::Domain::BLOCK_IOTUNE_WRITE_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum I/O operations written per second.

SCHEDULER CONSTANTS

Sys::Virt::Domain::SCHEDULER_CAP: The VM cap tunable
Sys::Virt::Domain::SCHEDULER_CPU_SHARES: The CPU shares tunable
Sys::Virt::Domain::SCHEDULER_LIMIT: The VM limit tunable
Sys::Virt::Domain::SCHEDULER_RESERVATION: The VM reservation tunable
Sys::Virt::Domain::SCHEDULER_SHARES: The VM shares tunable
Sys::Virt::Domain::SCHEDULER_VCPU_PERIOD: The VCPU period tunable
Sys::Virt::Domain::SCHEDULER_VCPU_QUOTA: The VCPU quota tunable
Sys::Virt::Domain::SCHEDULER_GLOBAL_PERIOD: The VM global period tunable
Sys::Virt::Domain::SCHEDULER_GLOBAL_QUOTA: The VM global quota tunable
Sys::Virt::Domain::SCHEDULER_WEIGHT: The VM weight tunable

NUMA PARAMETERS

The following constants are useful when getting/setting the guest NUMA memory policy

Sys::Virt::Domain::NUMA_MODE: The NUMA policy mode
Sys::Virt::Domain::NUMA_NODESET: The NUMA nodeset mask

The following constants are useful when interpreting the Sys::Virt::Domain::NUMA_MODE parameter value

Sys::Virt::Domain::NUMATUNE_MEM_STRICT: Allocation is mandatory from the mask nodes
Sys::Virt::Domain::NUMATUNE_MEM_PREFERRED: Allocation is preferred from the masked nodes
Sys::Virt::Domain::NUMATUNE_MEM_INTERLEAVE: Allocation is interleaved across all masked nodes
Sys::Virt::Domain::NUMATUNE_MEM_RESTRICTIVE: Allocation is determined by the host using the masked nodes.

INTERFACE PARAMETERS

The following constants are useful when getting/setting the per network interface tunable parameters

Sys::Virt::Domain::BANDWIDTH_IN_AVERAGE: The average inbound bandwidth
Sys::Virt::Domain::BANDWIDTH_IN_PEAK: The peak inbound bandwidth
Sys::Virt::Domain::BANDWIDTH_IN_BURST: The burstable inbound bandwidth
Sys::Virt::Domain::BANDWIDTH_IN_FLOOR: The minimum inbound bandwidth
Sys::Virt::Domain::BANDWIDTH_OUT_AVERAGE: The average outbound bandwidth
Sys::Virt::Domain::BANDWIDTH_OUT_PEAK: The peak outbound bandwidth
Sys::Virt::Domain::BANDWIDTH_OUT_BURST: The burstable outbound bandwidth

PERF EVENTS

The following constants defined performance events which can be monitored for a guest

Sys::Virt::Domain::PERF_PARAM_CMT: The CMT event counter which can be used to measure the usage of cache (bytes) by applications running on the platform. It corresponds to the "perf.cmt" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_MBML: The MBML event counter which can be used to monitor the amount of data (bytes/s) sent through the memory controller on the socket. It corresponds to the "perf.mbml" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_MBMT: The MBMT event counter which can be used to monitor total system bandwidth (bytes/s) from one level of cache to another. It corresponds to the "perf.mbmt" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CACHE_MISSES: The cache_misses perf event counter which can be used to measure the count of cache misses by applications running on the platform. It corresponds to the "perf.cache_misses" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CACHE_REFERENCES: The cache_references perf event counter which can be used to measure the count of cache hits by applications running on the platform. It corresponds to the "perf.cache_references" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CPU_CYCLES: The cpu_cycles perf event counter which can be used to measure how many cpu cycles one instruction needs. It corresponds to the "perf.cpu_cycles" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_INSTRUCTIONS: The instructions perf event counter which can be used to measure the count of instructions by applications running on the platform. It corresponds to the "perf.instructions" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_BRANCH_INSTRUCTIONS: The branch_instructions perf event counter which can be used to measure the count of instructions by applications running on the platform. It corresponds to the "perf.branch_instructions" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_BRANCH_MISSES: The branch_misses perf event which can be used to measure the count of branch misses by applications running on the platform. It corresponds to the "perf.branch_misses" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_BUS_CYCLES: The bus_cycles perf event counter which can be used to measure the count of bus cycles by applications running on the platform. It corresponds to the "perf.bus_cycles" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_STALLED_CYCLES_FRONTEND: The stalled_cycles_frontend perf event counter which can be used to measure the count of stalled cpu cycles in the frontend of the instruction processor pipeline by applications running on the platform. It corresponds to the "perf.stalled_cycles_frontend" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_STALLED_CYCLES_BACKEND: The stalled_cycles_backend perf event counter which can be used to measure the count of stalled cpu cycles in the backend of the instruction processor pipeline by application running on the platform. It corresponds to the "perf.stalled_cycles_backend" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_REF_CPU_CYCLES: The ref_cpu_cycles perf event counter which can be used to measure the count of total cpu cycles not affected by CPU frequency scaling by applications running on the platform. It corresponds to the "perf.ref_cpu_cycles" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CPU_CLOCK: The cpu_clock perf event counter which can be used to measure the count of cpu clock time by applications running on the platform. It corresponds to the "perf.cpu_clock" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_TASK_CLOCK: The task_clock perf event counter which can be used to measure the count of task clock time by applications running on the platform. It corresponds to the "perf.task_clock" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_PAGE_FAULTS: The page_faults perf event counter which can be used to measure the count of page faults by applications running on the platform. It corresponds to the "perf.page_faults" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CONTEXT_SWITCHES: The context_switches perf event counter which can be used to measure the count of context switches by applications running on the platform. It corresponds to the "perf.context_switches" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_CPU_MIGRATIONS: The cpu_migrations perf event counter which can be used to measure the count of cpu migrations by applications running on the platform. It corresponds to the "perf.cpu_migrations" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_PAGE_FAULTS_MIN: The page_faults_min perf event counter which can be used to measure the count of minor page faults by applications running on the platform. It corresponds to the "perf.page_faults_min" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_PAGE_FAULTS_MAJ: The page_faults_maj perf event counter which can be used to measure the count of major page faults by applications running on the platform. It corresponds to the "perf.page_faults_maj" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_ALIGNMENT_FAULTS: The alignment_faults perf event counter which can be used to measure the count of alignment faults by applications running on the platform. It corresponds to the "perf.alignment_faults" field in the *Stats APIs.
Sys::Virt::Domain::PERF_PARAM_EMULATION_FAULTS: The emulation_faults perf event counter which can be used to measure the count of emulation faults by applications running on the platform. It corresponds to the "perf.emulation_faults" field in the *Stats APIs.

IOTHREAD STATS

The following constants defined IOThread statistics which can be monitored for a guest

Sys::Virt::Domain::IOTHREAD_PARAM_POLL_MAX_NS: The maximum polling time that can be used by polling algorithm in ns. The polling time starts at 0 (zero) and is the time spent by the guest to process IOThread data before returning the CPU to the host. The polling time will be dynamically modified over time based on the poll_grow and poll_shrink parameters provided.
Sys::Virt::Domain::IOTHREAD_PARAM_POLL_GROW: This provides a value for the dynamic polling adjustment algorithm to use to grow its polling interval up to the poll_max_ns value.
Sys::Virt::Domain::IOTHREAD_PARAM_POLL_SHRINK: This provides a value for the dynamic polling adjustment algorithm to use to shrink its polling interval when the polling interval exceeds the poll_max_ns value.
Sys::Virt::Domain::IOTHREAD_PARAM_THREAD_POOL_MIN: Sets the lower bound for thread pool size. A value of -1 disables this bound leaving hypervisor use its default value, though this value is not accepted for running domains. Due to internal implementation it's recommended to set lower and upper bounds separately.
Sys::Virt::Domain::IOTHREAD_PARAM_THREAD_POOL_MAX: Sets the upper bound for thread pool size. A value of -1 disables this bound leaving hypervisor use its default value, though this value is not accepted for running domains. Since the upper band has to be equal to or greater than lower bound value of 0 is not accepted. Due to internal implementation it's recommended to set lower and upper bounds separately.

VCPU FLAGS

The following constants are useful when getting/setting the VCPU count for a guest

Sys::Virt::Domain::VCPU_LIVE: Flag to request the live value
Sys::Virt::Domain::VCPU_CONFIG: Flag to request the persistent config value
Sys::Virt::Domain::VCPU_CURRENT: Flag to request the current config value
Sys::Virt::Domain::VCPU_MAXIMUM: Flag to request adjustment of the maximum vCPU value
Sys::Virt::Domain::VCPU_GUEST: Flag to request the guest VCPU mask
Sys::Virt::Domain::VCPU_HOTPLUGGABLE: Flag to make vcpus added hot(un)pluggable

STATE CHANGE EVENTS

The following constants allow domain state change events to be interpreted. The events contain both a state change, and a reason.

Sys::Virt::Domain::EVENT_DEFINED

Indicates that a persistent configuration has been defined for the domain.

Sys::Virt::Domain::EVENT_DEFINED_ADDED: The defined configuration is newly added
Sys::Virt::Domain::EVENT_DEFINED_UPDATED: The defined configuration is an update to an existing configuration
Sys::Virt::Domain::EVENT_DEFINED_RENAMED: The defined configuration is a rename of an existing configuration
Sys::Virt::Domain::EVENT_DEFINED_FROM_SNAPSHOT: The defined configuration was restored from a snapshot

Sys::Virt::Domain::EVENT_RESUMED

The domain has resumed execution

Sys::Virt::Domain::EVENT_RESUMED_MIGRATED: The domain resumed because migration has completed. This is emitted on the destination host.
Sys::Virt::Domain::EVENT_RESUMED_UNPAUSED: The domain resumed because the admin unpaused it.
Sys::Virt::Domain::EVENT_RESUMED_FROM_SNAPSHOT: The domain resumed because it was restored from a snapshot
Sys::Virt::Domain::EVENT_RESUMED_POSTCOPY: The domain resumed but post-copy is running in background
Sys::Virt::Domain::EVENT_RESUMED_POSTCOPY_FAILED: The domain is running, but migration failed in post-copy.

Sys::Virt::Domain::EVENT_STARTED

The domain has started running

Sys::Virt::Domain::EVENT_STARTED_BOOTED: The domain was booted from shutoff state
Sys::Virt::Domain::EVENT_STARTED_MIGRATED: The domain started due to an incoming migration
Sys::Virt::Domain::EVENT_STARTED_RESTORED: The domain was restored from saved state file
Sys::Virt::Domain::EVENT_STARTED_FROM_SNAPSHOT: The domain was restored from a snapshot
Sys::Virt::Domain::EVENT_STARTED_WAKEUP: The domain was woken up from suspend

Sys::Virt::Domain::EVENT_STOPPED

The domain has stopped running

Sys::Virt::Domain::EVENT_STOPPED_CRASHED: The domain stopped because guest operating system has crashed
Sys::Virt::Domain::EVENT_STOPPED_DESTROYED: The domain stopped because administrator issued a destroy command.
Sys::Virt::Domain::EVENT_STOPPED_FAILED: The domain stopped because of a fault in the host virtualization environment.
Sys::Virt::Domain::EVENT_STOPPED_MIGRATED: The domain stopped because it was migrated to another machine.
Sys::Virt::Domain::EVENT_STOPPED_SAVED: The domain was saved to a state file
Sys::Virt::Domain::EVENT_STOPPED_SHUTDOWN: The domain stopped due to graceful shutdown of the guest.
Sys::Virt::Domain::EVENT_STOPPED_FROM_SNAPSHOT: The domain was stopped due to a snapshot

Sys::Virt::Domain::EVENT_SHUTDOWN

The domain has shutdown but is not yet stopped

Sys::Virt::Domain::EVENT_SHUTDOWN_FINISHED: The domain finished shutting down
Sys::Virt::Domain::EVENT_SHUTDOWN_HOST: The domain shutdown due to host trigger
Sys::Virt::Domain::EVENT_SHUTDOWN_GUEST: The domain shutdown due to guest trigger

Sys::Virt::Domain::EVENT_SUSPENDED

The domain has stopped executing, but still exists

Sys::Virt::Domain::EVENT_SUSPENDED_MIGRATED: The domain has been suspended due to offline migration
Sys::Virt::Domain::EVENT_SUSPENDED_PAUSED: The domain has been suspended due to administrator pause request.
Sys::Virt::Domain::EVENT_SUSPENDED_IOERROR: The domain has been suspended due to a block device I/O error.
Sys::Virt::Domain::EVENT_SUSPENDED_FROM_SNAPSHOT: The domain has been suspended due to resume from snapshot
Sys::Virt::Domain::EVENT_SUSPENDED_WATCHDOG: The domain has been suspended due to the watchdog triggering
Sys::Virt::Domain::EVENT_SUSPENDED_RESTORED: The domain has been suspended due to restore from saved state
Sys::Virt::Domain::EVENT_SUSPENDED_API_ERROR: The domain has been suspended due to an API error
Sys::Virt::Domain::EVENT_SUSPENDED_POSTCOPY: The domain has been suspended for post-copy migration
Sys::Virt::Domain::EVENT_SUSPENDED_POSTCOPY_FAILED: The domain has been suspended due post-copy migration failing

Sys::Virt::Domain::EVENT_UNDEFINED

The persistent configuration has gone away

Sys::Virt::Domain::EVENT_UNDEFINED_REMOVED: The domain configuration has gone away due to it being removed by administrator.
Sys::Virt::Domain::EVENT_UNDEFINED_RENAMED: The undefined configuration is a rename of an existing configuration

Sys::Virt::Domain::EVENT_PMSUSPENDED

The domain has stopped running

Sys::Virt::Domain::EVENT_PMSUSPENDED_MEMORY: The domain has suspend to RAM.
Sys::Virt::Domain::EVENT_PMSUSPENDED_DISK: The domain has suspend to Disk.

Sys::Virt::Domain::EVENT_CRASHED

The domain has crashed

Sys::Virt::Domain::EVENT_CRASHED_PANICKED: The domain has crashed due to a kernel panic
Sys::Virt::Domain::EVENT_CRASHED_CRASHLOADED: The domain has crashed and reloaded itself

EVENT ID CONSTANTS

Sys::Virt::Domain::EVENT_ID_LIFECYCLE

Domain lifecycle events

Sys::Virt::Domain::EVENT_ID_REBOOT

Soft / warm reboot events

Sys::Virt::Domain::EVENT_ID_RTC_CHANGE

RTC clock adjustments

Sys::Virt::Domain::EVENT_ID_IO_ERROR

File IO errors, typically from disks

Sys::Virt::Domain::EVENT_ID_WATCHDOG

Watchdog device triggering

Sys::Virt::Domain::EVENT_ID_GRAPHICS

Graphics client connections.

Sys::Virt::Domain::EVENT_ID_IO_ERROR_REASON

File IO errors, typically from disks, with a root cause

Sys::Virt::Domain::EVENT_ID_CONTROL_ERROR

Errors from the virtualization control channel

Sys::Virt::Domain::EVENT_ID_BLOCK_JOB

Completion status of asynchronous block jobs, identified by source file name.

Sys::Virt::Domain::EVENT_ID_BLOCK_JOB_2

Completion status of asynchronous block jobs, identified by target device name.

Sys::Virt::Domain::EVENT_ID_DISK_CHANGE

Changes in disk media

Sys::Virt::Domain::EVENT_ID_TRAY_CHANGE

CDROM media tray state

Sys::Virt::Domain::EVENT_ID_PMSUSPEND

Power management initiated suspend to RAM

Sys::Virt::Domain::EVENT_ID_PMSUSPEND_DISK

Power management initiated suspend to Disk

Sys::Virt::Domain::EVENT_ID_PMWAKEUP

Power management initiated wakeup

Sys::Virt::Domain::EVENT_ID_BALLOON_CHANGE

Balloon target changes

Sys::Virt::Domain::EVENT_ID_DEVICE_ADDED

Asynchronous guest device addition

Sys::Virt::Domain::EVENT_ID_DEVICE_REMOVED

Asynchronous guest device removal

Sys::Virt::Domain::EVENT_ID_TUNABLE

Changes of any domain tuning parameters. The callback will be provided with a hash listing all changed parameters. The later DOMAIN TUNABLE constants can be useful when accessing the hash keys

Sys::Virt::Domain::EVENT_ID_AGENT_LIFECYCLE

Domain guest agent lifecycle events. The state parameter to the callback will match one of the constants

Sys::Virt::Domain::EVENT_AGENT_LIFECYCLE_STATE_CONNECTED: The agent is now connected
Sys::Virt::Domain::EVENT_AGENT_LIFECYCLE_STATE_DISCONNECTED: The agent is now disconnected

The second parameter, reason, matches one of the following constants

Sys::Virt::Domain::EVENT_ID_MIGRATION_ITERATION

Domain migration progress iteration. The iteration parameter to the callback will specify the number of iterations migration has made over guest RAM.

Sys::Virt::Domain::EVENT_AGENT_LIFECYCLE_REASON_UNKNOWN: The reason is unknown
Sys::Virt::Domain::EVENT_AGENT_LIFECYCLE_REASON_DOMAIN_STARTED: The domain was initially booted
Sys::Virt::Domain::EVENT_AGENT_LIFECYCLE_REASON_CHANNEL: The channel on a running guest changed state

Sys::Virt::Domain::EVENT_ID_JOB_COMPLETED

Domain background job completion notification. The callback provides a hash containing the job stats. The keys in the hash are the same as those used with the Sys::Virt::Domain::get_job_stats() method.

Sys::Virt::Domain::EVENT_ID_DEVICE_REMOVAL_FAILED

Guest device removal has failed.

Sys::Virt::Domain::EVENT_ID_METADATA_CHANGE

The domain metadata has changed

Sys::Virt::Domain::EVENT_ID_BLOCK_THRESHOLD

The event occurs when the hypervisor detects that the given storage element was written beyond the point specified by threshold. The event is useful for thin-provisioned storage.

Sys::Virt::Domain::EVENT_ID_MEMORY_FAILURE

The event occurs when the hypervisor detects hardware memory corruption.

Sys::Virt::Domain::EVENT_ID_MEMORY_DEVICE_SIZE_CHANGE

The event occurs when the guest accepts a request to change the memory device size.

IO ERROR EVENT CONSTANTS

These constants describe what action was taken due to the IO error.

Sys::Virt::Domain::EVENT_IO_ERROR_NONE: No action was taken, the error was ignored & reported as success to guest
Sys::Virt::Domain::EVENT_IO_ERROR_PAUSE: The guest is paused since the error occurred
Sys::Virt::Domain::EVENT_IO_ERROR_REPORT: The error has been reported to the guest OS

WATCHDOG EVENT CONSTANTS

These constants describe what action was taken due to the watchdog firing

Sys::Virt::Domain::EVENT_WATCHDOG_NONE: No action was taken, the watchdog was ignored
Sys::Virt::Domain::EVENT_WATCHDOG_PAUSE: The guest is paused since the watchdog fired
Sys::Virt::Domain::EVENT_WATCHDOG_POWEROFF: The guest is powered off after the watchdog fired
Sys::Virt::Domain::EVENT_WATCHDOG_RESET: The guest is reset after the watchdog fired
Sys::Virt::Domain::EVENT_WATCHDOG_SHUTDOWN: The guest attempted to gracefully shutdown after the watchdog fired
Sys::Virt::Domain::EVENT_WATCHDOG_DEBUG: No action was taken, the watchdog was logged
Sys::Virt::Domain::EVENT_WATCHDOG_INJECTNMI: An NMI was injected into the guest after the watchdog fired

GRAPHICS EVENT PHASE CONSTANTS

These constants describe the phase of the graphics connection

Sys::Virt::Domain::EVENT_GRAPHICS_CONNECT: The initial client connection
Sys::Virt::Domain::EVENT_GRAPHICS_INITIALIZE: The client has been authenticated & the connection is running
Sys::Virt::Domain::EVENT_GRAPHICS_DISCONNECT: The client has disconnected

GRAPHICS EVENT ADDRESS CONSTANTS

These constants describe the format of the address

Sys::Virt::Domain::EVENT_GRAPHICS_ADDRESS_IPV4: An IPv4 address
Sys::Virt::Domain::EVENT_GRAPHICS_ADDRESS_IPV6: An IPv6 address
Sys::Virt::Domain::EVENT_GRAPHICS_ADDRESS_UNIX: An UNIX socket path address

DISK CHANGE EVENT CONSTANTS

These constants describe the reason for a disk change event

Sys::Virt::Domain::EVENT_DISK_CHANGE_MISSING_ON_START: The disk media was cleared, as its source was missing when attempting to start the guest
Sys::Virt::Domain::EVENT_DISK_DROP_MISSING_ON_START: The disk device was dropped, as its source was missing when attempting to start the guest

TRAY CHANGE CONSTANTS

These constants describe the reason for a tray change event

Sys::Virt::Domain::EVENT_TRAY_CHANGE_CLOSE: The tray was closed
Sys::Virt::Domain::EVENT_TRAY_CHANGE_OPEN: The tray was opened

DOMAIN BLOCK JOB TYPE CONSTANTS

The following constants identify the different types of domain block jobs

Sys::Virt::Domain::BLOCK_JOB_TYPE_UNKNOWN: An unknown block job type
Sys::Virt::Domain::BLOCK_JOB_TYPE_PULL: The block pull job type
Sys::Virt::Domain::BLOCK_JOB_TYPE_COPY: The block copy job type
Sys::Virt::Domain::BLOCK_JOB_TYPE_COMMIT: The block commit job type
Sys::Virt::Domain::BLOCK_JOB_TYPE_ACTIVE_COMMIT: The block active commit job type
Sys::Virt::Domain::BLOCK_JOB_TYPE_BACKUP: The block backup job type

DOMAIN BLOCK JOB COMPLETION CONSTANTS

The following constants can be used to determine the completion status of a block job

Sys::Virt::Domain::BLOCK_JOB_COMPLETED: A successfully completed block job
Sys::Virt::Domain::BLOCK_JOB_FAILED: An unsuccessful block job
Sys::Virt::Domain::BLOCK_JOB_CANCELED: A block job canceled by the user
Sys::Virt::Domain::BLOCK_JOB_READY: A block job is running

DOMAIN BLOCK REBASE CONSTANTS

The following constants are useful when rebasing block devices

Sys::Virt::Domain::BLOCK_REBASE_SHALLOW: Limit copy to top of source backing chain
Sys::Virt::Domain::BLOCK_REBASE_REUSE_EXT: Reuse existing external file for copy
Sys::Virt::Domain::BLOCK_REBASE_COPY_RAW: Make destination file raw
Sys::Virt::Domain::BLOCK_REBASE_COPY: Start a copy job
Sys::Virt::Domain::BLOCK_REBASE_COPY_DEV: Treat destination as a block device instead of file
Sys::Virt::Domain::BLOCK_REBASE_RELATIVE: Keep backing chain referenced using relative names

DOMAIN BLOCK COPY CONSTANTS

The following constants are useful when copying block devices

Sys::Virt::Domain::BLOCK_COPY_SHALLOW: Limit copy to top of source backing chain
Sys::Virt::Domain::BLOCK_COPY_REUSE_EXT: Reuse existing external file for copy
Sys::Virt::Domain::BLOCK_COPY_TRANSIENT_JOB: Don't force usage of recoverable job for the copy operation
Sys::Virt::Domain::BLOCK_COPY_SYNCHRONOUS_WRITES: Force the copy job to synchronously propagate guest writes into the destination image, so that the copy is guaranteed to converge

DOMAIN BLOCK JOB ABORT CONSTANTS

The following constants are useful when aborting job copy jobs

Sys::Virt::Domain::BLOCK_JOB_ABORT_ASYNC: Request only, do not wait for completion
Sys::Virt::Domain::BLOCK_JOB_ABORT_PIVOT: Pivot to mirror when ending a copy job

DOMAIN BLOCK COMMIT JOB CONSTANTS

The following constants are useful with block commit job types

Sys::Virt::Domain::BLOCK_COMMIT_DELETE: Delete any files that are invalid after commit
Sys::Virt::Domain::BLOCK_COMMIT_SHALLOW: NULL base means next backing file, not whole chain
Sys::Virt::Domain::BLOCK_COMMIT_ACTIVE: Allow two phase commit when top is active layer
Sys::Virt::Domain::BLOCK_COMMIT_RELATIVE: Keep backing chain referenced using relative names

DOMAIN SAVE / RESTORE FLAG CONSTANTS

The following constants can be used when saving or restoring virtual machines

Sys::Virt::Domain::SAVE_BYPASS_CACHE: Do not use OS I/O cache when saving state.
Sys::Virt::Domain::SAVE_PAUSED: Mark the saved state as paused to prevent the guest CPUs starting upon restore.
Sys::Virt::Domain::SAVE_RUNNING: Mark the saved state as running to allow the guest CPUs to start upon restore.
Sys::Virt::Domain::SAVE_RESET_NVRAM: Reset the firmware NVRAM state from its original template

SAVE / RESTORE PARAMETER CONSTANTS

Sys::Virt::Domain::SAVE_PARAM_FILE: Specify the save state file to save to or restore from.
Sys::Virt::Domain::SAVE_PARAM_DXML: Used to adjust guest xml on restore, e.g. to alter a device while domain is stopped.

DOMAIN CORE DUMP CONSTANTS

The following constants can be used when triggering domain core dumps

Sys::Virt::Domain::DUMP_LIVE: Do not pause execution while dumping the guest
Sys::Virt::Domain::DUMP_CRASH: Crash the guest after completing the core dump
Sys::Virt::Domain::DUMP_BYPASS_CACHE: Do not use OS I/O cache when writing core dump
Sys::Virt::Domain::DUMP_RESET: Reset the virtual machine after finishing the dump
Sys::Virt::Domain::DUMP_MEMORY_ONLY: Only include guest RAM in the dump, not the device state

DESTROY CONSTANTS

The following constants are useful when terminating guests using the destroy API.

Sys::Virt::Domain::DESTROY_DEFAULT: Destroy the guest using the default approach
Sys::Virt::Domain::DESTROY_GRACEFUL: Destroy the guest in a graceful manner
Sys::Virt::Domain::DESTROY_REMOVE_LOGS: Delete log files associated with the guest

SHUTDOWN CONSTANTS

The following constants are useful when requesting that a guest terminate using the shutdown API

Sys::Virt::Domain::SHUTDOWN_DEFAULT: Shutdown using the hypervisor's default mechanism
Sys::Virt::Domain::SHUTDOWN_GUEST_AGENT: Shutdown by issuing a command to a guest agent
Sys::Virt::Domain::SHUTDOWN_ACPI_POWER_BTN: Shutdown by injecting an ACPI power button press
Sys::Virt::Domain::SHUTDOWN_INITCTL: Shutdown by talking to initctl (containers only)
Sys::Virt::Domain::SHUTDOWN_SIGNAL: Shutdown by sending SIGTERM to the init process
Sys::Virt::Domain::SHUTDOWN_PARAVIRT: Shutdown by issuing a paravirt power control command

REBOOT CONSTANTS

The following constants are useful when requesting that a guest terminate using the reboot API

Sys::Virt::Domain::REBOOT_DEFAULT: Reboot using the hypervisor's default mechanism
Sys::Virt::Domain::REBOOT_GUEST_AGENT: Reboot by issuing a command to a guest agent
Sys::Virt::Domain::REBOOT_ACPI_POWER_BTN: Reboot by injecting an ACPI power button press
Sys::Virt::Domain::REBOOT_INITCTL: Reboot by talking to initctl (containers only)
Sys::Virt::Domain::REBOOT_SIGNAL: Reboot by sending SIGHUP to the init process
Sys::Virt::Domain::REBOOT_PARAVIRT: Reboot by issuing a paravirt power control command

METADATA CONSTANTS

The following constants are useful when reading/writing metadata about a guest

Sys::Virt::Domain::METADATA_TITLE: The short human friendly title of the guest
Sys::Virt::Domain::METADATA_DESCRIPTION: The long free text description of the guest
Sys::Virt::Domain::METADATA_ELEMENT: The structured metadata elements for the guest

DISK ERROR CONSTANTS

The following constants are useful when interpreting disk error codes

Sys::Virt::Domain::DISK_ERROR_NONE: No error
Sys::Virt::Domain::DISK_ERROR_NO_SPACE: The host storage has run out of free space
Sys::Virt::Domain::DISK_ERROR_UNSPEC: An unspecified error has occurred.

MEMORY STATISTIC CONSTANTS

Sys::Virt::Domain::MEMORY_STAT_SWAP_IN: Swap in
Sys::Virt::Domain::MEMORY_STAT_SWAP_OUT: Swap out
Sys::Virt::Domain::MEMORY_STAT_MINOR_FAULT: Minor faults
Sys::Virt::Domain::MEMORY_STAT_MAJOR_FAULT: Major faults
Sys::Virt::Domain::MEMORY_STAT_RSS: Resident memory
Sys::Virt::Domain::MEMORY_STAT_UNUSED: Unused memory
Sys::Virt::Domain::MEMORY_STAT_AVAILABLE: Available memory
Sys::Virt::Domain::MEMORY_STAT_ACTUAL_BALLOON: Actual balloon limit
Sys::Virt::Domain::MEMORY_STAT_USABLE: Amount of usable memory
Sys::Virt::Domain::MEMORY_STAT_LAST_UPDATE: Time of last stats refresh from guest
Sys::Virt::Domain::MEMORY_STAT_DISK_CACHES: Disk cache size
Sys::Virt::Domain::MEMORY_STAT_HUGETLB_PGALLOC: The amount of successful huge page allocations
Sys::Virt::Domain::MEMORY_STAT_HUGETLB_PGFAIL: The amount of failed huge page allocations

DOMAIN LIST CONSTANTS

The following constants can be used when listing domains

Sys::Virt::Domain::LIST_ACTIVE: Only list domains that are currently active (running, or paused)
Sys::Virt::Domain::LIST_AUTOSTART: Only list domains that are set to automatically start on boot
Sys::Virt::Domain::LIST_HAS_SNAPSHOT: Only list domains that have a stored snapshot
Sys::Virt::Domain::LIST_INACTIVE: Only list domains that are currently inactive (shutoff, saved)
Sys::Virt::Domain::LIST_MANAGEDSAVE: Only list domains that have current managed save state
Sys::Virt::Domain::LIST_NO_AUTOSTART: Only list domains that are not set to automatically start on boto
Sys::Virt::Domain::LIST_NO_MANAGEDSAVE: Only list domains that do not have any managed save state
Sys::Virt::Domain::LIST_NO_SNAPSHOT: Only list domains that do not have a stored snapshot
Sys::Virt::Domain::LIST_OTHER: Only list domains that are not running, paused or shutoff
Sys::Virt::Domain::LIST_PAUSED: Only list domains that are paused
Sys::Virt::Domain::LIST_PERSISTENT: Only list domains which have a persistent config
Sys::Virt::Domain::LIST_RUNNING: Only list domains that are currently running
Sys::Virt::Domain::LIST_SHUTOFF: Only list domains that are currently shutoff
Sys::Virt::Domain::LIST_TRANSIENT: Only list domains that do not have a persistent config
Sys::Virt::Domain::LIST_HAS_CHECKPOINT: Only list domains that have a stored checkpoint
Sys::Virt::Domain::LIST_NO_CHECKPOINT: Only list domains that do not have a stored checkpoint

SEND KEY CONSTANTS

The following constants are to be used with the send_key API

Sys::Virt::Domain::SEND_KEY_MAX_KEYS: The maximum number of keys that can be sent in a single call to send_key

BLOCK STATS CONSTANTS

The following constants provide the names of well known block stats fields

Sys::Virt::Domain::BLOCK_STATS_ERRS: The number of I/O errors
Sys::Virt::Domain::BLOCK_STATS_FLUSH_REQ: The number of flush requests
Sys::Virt::Domain::BLOCK_STATS_FLUSH_TOTAL_TIMES: The time spent processing flush requests
Sys::Virt::Domain::BLOCK_STATS_READ_BYTES: The amount of data read
Sys::Virt::Domain::BLOCK_STATS_READ_REQ: The number of read requests
Sys::Virt::Domain::BLOCK_STATS_READ_TOTAL_TIMES: The time spent processing read requests
Sys::Virt::Domain::BLOCK_STATS_WRITE_BYTES: The amount of data written
Sys::Virt::Domain::BLOCK_STATS_WRITE_REQ: The number of write requests
Sys::Virt::Domain::BLOCK_STATS_WRITE_TOTAL_TIMES: The time spent processing write requests

CPU STATS CONSTANTS

The following constants provide the names of well known cpu stats fields

Sys::Virt::Domain::CPU_STATS_CPUTIME: The total CPU time, including both hypervisor and vCPU time.
Sys::Virt::Domain::CPU_STATS_USERTIME: THe total time in kernel
Sys::Virt::Domain::CPU_STATS_SYSTEMTIME: The total time in userspace
Sys::Virt::Domain::CPU_STATS_VCPUTIME: The total vCPU time.

CPU STATS CONSTANTS

The following constants provide the names of well known schedular parameters

Sys::Virt::SCHEDULER_EMULATOR_PERIOD: The duration of the time period for scheduling the emulator
Sys::Virt::SCHEDULER_EMULATOR_QUOTA: The quota for the emulator in one schedular time period
Sys::Virt::SCHEDULER_IOTHREAD_PERIOD: The duration of the time period for scheduling the iothread
Sys::Virt::SCHEDULER_IOTHREAD_QUOTA: The quota for the iothread in one schedular time period

DOMAIN STATS FLAG CONSTANTS

The following constants are used as flags when requesting bulk domain stats from Sys::Virt::get_all_domain_stats.

Sys::Virt::Domain::GET_ALL_STATS_ACTIVE: Include stats for active domains
Sys::Virt::Domain::GET_ALL_STATS_INACTIVE: Include stats for inactive domains
Sys::Virt::Domain::GET_ALL_STATS_OTHER: Include stats for other domains
Sys::Virt::Domain::GET_ALL_STATS_PAUSED: Include stats for paused domains
Sys::Virt::Domain::GET_ALL_STATS_PERSISTENT: Include stats for persistent domains
Sys::Virt::Domain::GET_ALL_STATS_RUNNING: Include stats for running domains
Sys::Virt::Domain::GET_ALL_STATS_SHUTOFF: Include stats for shutoff domains
Sys::Virt::Domain::GET_ALL_STATS_TRANSIENT: Include stats for transient domains
Sys::Virt::Domain::GET_ALL_STATS_ENFORCE_STATS: Require that all requested stats fields are returned
Sys::Virt::Domain::GET_ALL_STATS_BACKING: Get stats for image backing files too
Sys::Virt::Domain::GET_ALL_STATS_NOWAIT: Skip stats if they can't be acquired without waiting

DOMAIN STATS FIELD CONSTANTS

The following constants are used to control which fields are returned for stats queries.

Sys::Virt::Domain::STATS_BALLOON: Balloon statistics
Sys::Virt::Domain::STATS_BLOCK: Block device info
Sys::Virt::Domain::STATS_CPU_TOTAL: CPU usage info
Sys::Virt::Domain::STATS_INTERFACE: Network interface info
Sys::Virt::Domain::STATS_STATE: General lifecycle state
Sys::Virt::Domain::STATS_VCPU: Virtual CPU info
Sys::Virt::Domain::STATS_PERF: Performance event counter values
Sys::Virt::Domain::STATS_IOTHREAD: IOThread performance statistics values
Sys::Virt::Domain::STATS_MEMORY: Memory bandwidth statistics values
Sys::Virt::Domain::STATS_DIRTYRATE: Memory dirty rate statistics
Sys::Virt::Domain::STATS_VM: Hypervisor-specific stats fields for given VM

PROCESS SIGNALS

The following constants provide the names of signals which can be sent to guest processes. They mostly correspond to POSIX signal names.

Sys::Virt::Domain::PROCESS_SIGNAL_NOP: SIGNOP
Sys::Virt::Domain::PROCESS_SIGNAL_HUP: SIGHUP
Sys::Virt::Domain::PROCESS_SIGNAL_INT: SIGINT
Sys::Virt::Domain::PROCESS_SIGNAL_QUIT: SIGQUIT
Sys::Virt::Domain::PROCESS_SIGNAL_ILL: SIGILL
Sys::Virt::Domain::PROCESS_SIGNAL_TRAP: SIGTRAP
Sys::Virt::Domain::PROCESS_SIGNAL_ABRT: SIGABRT
Sys::Virt::Domain::PROCESS_SIGNAL_BUS: SIGBUS
Sys::Virt::Domain::PROCESS_SIGNAL_FPE: SIGFPE
Sys::Virt::Domain::PROCESS_SIGNAL_KILL: SIGKILL
Sys::Virt::Domain::PROCESS_SIGNAL_USR1: SIGUSR1
Sys::Virt::Domain::PROCESS_SIGNAL_SEGV: SIGSEGV
Sys::Virt::Domain::PROCESS_SIGNAL_USR2: SIGUSR2
Sys::Virt::Domain::PROCESS_SIGNAL_PIPE: SIGPIPE
Sys::Virt::Domain::PROCESS_SIGNAL_ALRM: SIGALRM
Sys::Virt::Domain::PROCESS_SIGNAL_TERM: SIGTERM
Sys::Virt::Domain::PROCESS_SIGNAL_STKFLT: SIGSTKFLT
Sys::Virt::Domain::PROCESS_SIGNAL_CHLD: SIGCHLD
Sys::Virt::Domain::PROCESS_SIGNAL_CONT: SIGCONT
Sys::Virt::Domain::PROCESS_SIGNAL_STOP: SIGSTOP
Sys::Virt::Domain::PROCESS_SIGNAL_TSTP: SIGTSTP
Sys::Virt::Domain::PROCESS_SIGNAL_TTIN: SIGTTIN
Sys::Virt::Domain::PROCESS_SIGNAL_TTOU: SIGTTOU
Sys::Virt::Domain::PROCESS_SIGNAL_URG: SIGURG
Sys::Virt::Domain::PROCESS_SIGNAL_XCPU: SIGXCPU
Sys::Virt::Domain::PROCESS_SIGNAL_XFSZ: SIGXFSZ
Sys::Virt::Domain::PROCESS_SIGNAL_VTALRM: SIGVTALRM
Sys::Virt::Domain::PROCESS_SIGNAL_PROF: SIGPROF
Sys::Virt::Domain::PROCESS_SIGNAL_WINCH: SIGWINCH
Sys::Virt::Domain::PROCESS_SIGNAL_POLL: SIGPOLL
Sys::Virt::Domain::PROCESS_SIGNAL_PWR: SIGPWR
Sys::Virt::Domain::PROCESS_SIGNAL_SYS: SIGSYS
Sys::Virt::Domain::PROCESS_SIGNAL_RT0: SIGRT0
Sys::Virt::Domain::PROCESS_SIGNAL_RT1: SIGRT1
Sys::Virt::Domain::PROCESS_SIGNAL_RT2: SIGRT2
Sys::Virt::Domain::PROCESS_SIGNAL_RT3: SIGRT3
Sys::Virt::Domain::PROCESS_SIGNAL_RT4: SIGRT4
Sys::Virt::Domain::PROCESS_SIGNAL_RT5: SIGRT5
Sys::Virt::Domain::PROCESS_SIGNAL_RT6: SIGRT6
Sys::Virt::Domain::PROCESS_SIGNAL_RT7: SIGRT7
Sys::Virt::Domain::PROCESS_SIGNAL_RT8: SIGRT8
Sys::Virt::Domain::PROCESS_SIGNAL_RT9: SIGRT9
Sys::Virt::Domain::PROCESS_SIGNAL_RT10: SIGRT10
Sys::Virt::Domain::PROCESS_SIGNAL_RT11: SIGRT11
Sys::Virt::Domain::PROCESS_SIGNAL_RT12: SIGRT12
Sys::Virt::Domain::PROCESS_SIGNAL_RT13: SIGRT13
Sys::Virt::Domain::PROCESS_SIGNAL_RT14: SIGRT14
Sys::Virt::Domain::PROCESS_SIGNAL_RT15: SIGRT15
Sys::Virt::Domain::PROCESS_SIGNAL_RT16: SIGRT16
Sys::Virt::Domain::PROCESS_SIGNAL_RT17: SIGRT17
Sys::Virt::Domain::PROCESS_SIGNAL_RT18: SIGRT18
Sys::Virt::Domain::PROCESS_SIGNAL_RT19: SIGRT19
Sys::Virt::Domain::PROCESS_SIGNAL_RT20: SIGRT20
Sys::Virt::Domain::PROCESS_SIGNAL_RT21: SIGRT21
Sys::Virt::Domain::PROCESS_SIGNAL_RT22: SIGRT22
Sys::Virt::Domain::PROCESS_SIGNAL_RT23: SIGRT23
Sys::Virt::Domain::PROCESS_SIGNAL_RT24: SIGRT24
Sys::Virt::Domain::PROCESS_SIGNAL_RT25: SIGRT25
Sys::Virt::Domain::PROCESS_SIGNAL_RT26: SIGRT26
Sys::Virt::Domain::PROCESS_SIGNAL_RT27: SIGRT27
Sys::Virt::Domain::PROCESS_SIGNAL_RT28: SIGRT28
Sys::Virt::Domain::PROCESS_SIGNAL_RT29: SIGRT29
Sys::Virt::Domain::PROCESS_SIGNAL_RT30: SIGRT30
Sys::Virt::Domain::PROCESS_SIGNAL_RT31: SIGRT31
Sys::Virt::Domain::PROCESS_SIGNAL_RT32: SIGRT32

DOMAIN TUNABLE CONSTANTS

The following constants are useful when accessing domain tuning parameters in APIs and events

Sys::Virt::Domain::TUNABLE_CPU_CPU_SHARES: Proportional CPU weight
Sys::Virt::Domain::TUNABLE_CPU_EMULATORPIN: Emulator thread CPU pinning mask
Sys::Virt::Domain::TUNABLE_CPU_EMULATOR_PERIOD: Emulator thread CPU period
Sys::Virt::Domain::TUNABLE_CPU_EMULATOR_QUOTA: Emulator thread CPU quota
Sys::Virt::Domain::TUNABLE_CPU_IOTHREAD_PERIOD: Iothread thread CPU period
Sys::Virt::Domain::TUNABLE_CPU_IOTHREAD_QUOTA: Iothread thread CPU quota
Sys::Virt::Domain::TUNABLE_CPU_VCPUPIN: VCPU thread pinning mask
Sys::Virt::Domain::TUNABLE_CPU_VCPU_PERIOD: VCPU thread period
Sys::Virt::Domain::TUNABLE_CPU_VCPU_QUOTA: VCPU thread quota
Sys::Virt::Domain::TUNABLE_CPU_GLOBAL_PERIOD: VM global period
Sys::Virt::Domain::TUNABLE_CPU_GLOBAL_QUOTA: VM global quota
Sys::Virt::Domain::TUNABLE_BLKDEV_DISK: The name of guest disks
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_BYTES_SEC: Read throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_IOPS_SEC: Read throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_BYTES_SEC: Total throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_IOPS_SEC: Total throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_BYTES_SEC: Write throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_IOPS_SEC: Write throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_BYTES_SEC_MAX: Maximum read throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_IOPS_SEC_MAX: Maximum read throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_BYTES_SEC_MAX: Maximum total throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_IOPS_SEC_MAX: Maximum total throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_BYTES_SEC_MAX: Maximum write throughput in bytes per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_IOPS_SEC_MAX: Maximum write throughput in I/O operations per sec
Sys::Virt::Domain::TUNABLE_BLKDEV_SIZE_IOPS_SEC: The maximum I/O operations per second
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum total bytes processed per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum bytes read per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_BYTES_SEC_MAX_LENGTH: The duration in seconds allowed for maximum bytes written per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_TOTAL_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum total I/O operations processed per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_READ_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum I/O operations read per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_WRITE_IOPS_SEC_MAX_LENGTH: The duration in seconds allowed for maximum I/O operations written per second.
Sys::Virt::Domain::TUNABLE_BLKDEV_GROUP_NAME: The name of the blkdev group
Sys::Virt::Domain::TUNABLE_IOTHREADSPIN: The I/O threads pinning

DOMAIN LIFECYCLE CONSTANTS

The following constants are useful when setting action for lifecycle events.

Sys::Virt::Domain::LIFECYCLE_POWEROFF: The poweroff lifecycle event type
Sys::Virt::Domain::LIFECYCLE_REBOOT: The reboot lifecycle event type
Sys::Virt::Domain::LIFECYCLE_CRASH: The crash lifecycle event type

DOMAIN LIFECYCLE ACTION CONSTANTS

Sys::Virt::Domain::LIFECYCLE_ACTION_DESTROY: The destroy lifecycle action
Sys::Virt::Domain::LIFECYCLE_ACTION_RESTART: The restart lifecycle action
Sys::Virt::Domain::LIFECYCLE_ACTION_RESTART_RENAME: The restart-rename lifecycle action
Sys::Virt::Domain::LIFECYCLE_ACTION_PRESERVE: The preserve lifecycle action
Sys::Virt::Domain::LIFECYCLE_ACTION_COREDUMP_DESTROY: The coredump-destroy lifecycle action
Sys::Virt::Domain::LIFECYCLE_ACTION_COREDUMP_RESTART: The coredump-restart lifecycle action

MEMORY FAILURE ACTION CONSTANTS

Sys::Virt::Domain::EVENT_MEMORY_FAILURE_ACTION_IGNORE: The failure could be ignored
Sys::Virt::Domain::EVENT_MEMORY_FAILURE_ACTION_INJECT: An MCE was injected to the guest
Sys::Virt::Domain::EVENT_MEMORY_FAILURE_ACTION_FATAL: The failure is non-recoverable and the hypervisor was not able to handle it
Sys::Virt::Domain::EVENT_MEMORY_FAILURE_ACTION_RESET: The failure is non-recoverable and the guest was not able to handle it.

MEMORY FAILURE RECIPIENT CONSTANTS

Sys::Virt::Domain::EVENT_MEMORY_FAILURE_RECIPIENT_HYPERVISOR: The memory failure was in hypervisor address space
Sys::Virt::Domain::EVENT_MEMORY_FAILURE_RECIPIENT_GUEST: The memory failure was in guest address space

MEMORY FAILURE FLAG CONSTANTS

Sys::Virt::Domain::MEMORY_FAILURE_ACTION_REQUIRED: Whether the flag is action-required or action-optional
Sys::Virt::Domain::MEMORY_FAILURE_RECURSIVE: The failure occurred while the previous fault was being handled.

MEMORY DIRTY RATE STATUS CONSTANTS

Sys::Virt::Domain::DIRTYRATE_UNSTARTED: The dirty rate is not being measured currently.
Sys::Virt::Domain::DIRTYRATE_MEASURING: The dity rate is in the process of being measured
Sys::Virt::Domain::DIRTYRATE_MEASURED: The dirty rate has been measured

AUTHORS

Daniel P. Berrange <berrange@redhat.com>

COPYRIGHT

LICENSE

This program is free software; you can redistribute it and/or modify it under the terms of either the GNU General Public License as published by the Free Software Foundation (either version 2 of the License, or at your option any later version), or, the Artistic License, as specified in the Perl README file.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

DESCRIPTION

METHODS

CONSTANTS

DOMAIN STATE

CONTROL INFO

DOMAIN CREATION

DOMAIN DEFINE

KEYCODE SETS

MEMORY PEEK

VCPU STATE

VCPU HOST PLACEMENT STATE

OPEN GRAPHICS CONSTANTS

OPEN CONSOLE CONSTANTS

OPEN CHANNEL CONSTANTS

XML DUMP OPTIONS

DEVICE HOTPLUG OPTIONS

MEMORY OPTIONS

CONFIG OPTIONS

MIGRATE OPTIONS

UNDEFINE CONSTANTS

JOB TYPES

MEMORY PARAMETERS

BLKIO PARAMETERS

BLKIO TUNING PARAMETERS

SCHEDULER CONSTANTS

NUMA PARAMETERS

INTERFACE PARAMETERS

PERF EVENTS

IOTHREAD STATS

VCPU FLAGS

STATE CHANGE EVENTS

EVENT ID CONSTANTS

IO ERROR EVENT CONSTANTS

WATCHDOG EVENT CONSTANTS

GRAPHICS EVENT PHASE CONSTANTS

GRAPHICS EVENT ADDRESS CONSTANTS

DISK CHANGE EVENT CONSTANTS

TRAY CHANGE CONSTANTS

DOMAIN BLOCK JOB TYPE CONSTANTS

DOMAIN BLOCK JOB COMPLETION CONSTANTS

DOMAIN BLOCK REBASE CONSTANTS

DOMAIN BLOCK COPY CONSTANTS

DOMAIN BLOCK JOB ABORT CONSTANTS

DOMAIN BLOCK COMMIT JOB CONSTANTS

DOMAIN SAVE / RESTORE FLAG CONSTANTS

SAVE / RESTORE PARAMETER CONSTANTS

DOMAIN CORE DUMP CONSTANTS

DESTROY CONSTANTS

SHUTDOWN CONSTANTS

REBOOT CONSTANTS

METADATA CONSTANTS

DISK ERROR CONSTANTS

MEMORY STATISTIC CONSTANTS

DOMAIN LIST CONSTANTS

SEND KEY CONSTANTS

BLOCK STATS CONSTANTS

CPU STATS CONSTANTS

CPU STATS CONSTANTS

DOMAIN STATS FLAG CONSTANTS

DOMAIN STATS FIELD CONSTANTS

PROCESS SIGNALS

DOMAIN TUNABLE CONSTANTS

DOMAIN LIFECYCLE CONSTANTS

DOMAIN LIFECYCLE ACTION CONSTANTS

MEMORY FAILURE ACTION CONSTANTS

MEMORY FAILURE RECIPIENT CONSTANTS

MEMORY FAILURE FLAG CONSTANTS

MEMORY DIRTY RATE STATUS CONSTANTS

AUTHORS

COPYRIGHT

LICENSE

SEE ALSO

Module Install Instructions