NAME

Config::Model::Value - Strongly typed configuration value

VERSION

version 1.260

SYNOPSIS

 use Config::Model;
 use Log::Log4perl qw(:easy);
 Log::Log4perl->easy_init($WARN);

 # define configuration tree object
 my $model = Config::Model->new;
 $model ->create_config_class (
    name => "MyClass",

    element => [ 

        [qw/foo bar/] => {
            type       => 'leaf',
            value_type => 'string',
	    description => 'foobar',
        },
     country => { 
       type =>       'leaf',
       value_type => 'enum',
       choice =>      [qw/France US/],
       description => 'big countries',
     },
    ],
 ) ;

 my $inst = $model->instance(root_class_name => 'MyClass' );

 my $root = $inst->config_root ;

 # put data
 $root->load( step => 'foo=FOO country=US' );

 print $root->report ;
 #  foo = FOO
 #         DESCRIPTION: foobar
 # 
 #  country = US
 #         DESCRIPTION: big countries

DESCRIPTION

This class provides a way to specify configuration value with the following properties:

Strongly typed scalar: the value can either be an enumerated type, a boolean, a number, an integer or a string
default parameter: a value can have a default value specified during the construction. This default value will be written in the target configuration file. (default parameter)
upstream default parameter: specifies a default value that will be used by the application when no information is provided in the configuration file. This upstream_default value will not written in the configuration files. Only the fetch_standard method will return the builtin value. This parameter was previously referred as built_in value. This may be used for audit purpose. (upstream_default parameter)
mandatory value: reading a mandatory value will raise an exception if the value is not specified and has no default value.
dynamic change of property: A slave value can be registered to another master value so that the properties of the slave value can change according to the value of the master value. For instance, paper size value can be 'letter' for country 'US' and 'A4' for country 'France'.
A reference to the Id of a hash of list element. In other word, the value is an enumerated type where the possible values (choice) is defined by the existing keys of a has element somewhere in the tree. See "Value Reference".

Default values

There are several kind of default values. They depend on where these values are defined (or found).

From the lowest default level to the "highest":

upstream_default: The value is knows in the application, but is not written in the configuration file.
default: The value is known by the model, but not by the application. This value must be written in the configuration file.
computed: The value is computed from other configuration elements. This value must be written in the configuration file.
preset: The value is not known by the model or by the application. But it can be found by an automatic program and stored while the configuration Config::Model::Instance is in Config::Model::Instance/"preset_start ()"

Then there is the value entered by the user. This will override all kind of "default" value.

The fetch_standard function will return the "highest" level of default value, but will not return a custom value, i.e. a value entered by the user.

Constructor

Value object should not be created directly.

Value model declaration

A leaf element must be declared with the following parameters:

value_type

Either boolean, enum, integer, number, uniline, string. Mandatory. See "Value types".

default

Specify the default value (optional)

upstream_default

Specify a built in default value (optional)

compute

Will compute a value according to a formula and other values. By default a computed value cannot be set. See Config::Model::ValueComputer for computed value declaration.

migrate_from

This is a special parameter to cater for smooth configuration upgrade. This parameter can be used to copy the value of a deprecated parameter to its replacement. See "upgrade"" in " for details.

convert => [uc | lc ]

When stored, the value will be converted to uppercase (uc) or lowercase (lc).

min

Specify the minimum value (optional, only for integer, number)

max

Specify the maximum value (optional, only for integer, number)

mandatory

Set to 1 if the configuration value must be set by the configuration user (default: 0)

choice

Array ref of the possible value of an enum. Example :

choice => [ qw/foo bar/]

match

Perl regular expression. The value will be match with the regex to assert its validity. Example match => '^foo' means that the parameter value must begin with "foo". Valid only for string or uniline values.

warn_if_match

Hash ref. Keys are made of Perl regular expression. The value can specify a warning message (leave empty or undefined for default warning message) and instructions to fix the value. A warning will be issued when the value match the passed regular expression. Valid only for string or uniline values. The fix instructions will be evaluated when apply_fixes is called. $_ will contain the value to fix. $_ will be stored as the new value once the instructions are done. $self will contain the value object. Use with care.

In the example below, any value matching 'foo' will be converted in uppercase:

warn_if_match => { 'foo' => { fix =>'uc;', msg =>  'lower foo is not good'}},

warn_unless_match

Hash ref like above. A warning will be issued when the value does not match the passed regular expression. Valid only for string or uniline values.

warn

String. Issue a warning to user with the specified string any time a value is set or read.

warn_unless

A bit like warn_if_match. The hash key is not a regexp but a label to help users. The hash ref containd some Perl code that is evaluated to perform the test. A warning will be issued if the code returns false.

$_ will contains the value to check. $self will contain the Config::Model::Value object.

The example below will warn if a directory is missing:

warn_unless => { 'dir' => { code => '-d' , msg => 'missing dir', fix => "system(mkdir $_);" }}

assert

Like warn_if_match. Except that returned value will trigger an error if false.

grammar

Setup a Parse::RecDescent grammar to perform validation.

If the grammar does not start with a "check" rule (i.e does not start with "check: "), the first line of the grammar will be modified to add "check" rule and set up this rules so the entire value must match the passed grammar.

I.e. the grammar:

token (oper token)(s?)
oper: 'and' | 'or'
token: 'Apache' | 'CC-BY' | 'Perl'

will be changed to

check: token (oper token)(s?) /^\Z/ {$return = 1;}
oper: 'and' | 'or'
token: 'Apache' | 'CC-BY' | 'Perl'

The rule is called with Value object and a string reference. So, in the actions you may need to define, you can call the value object as $arg[0], store error message in ${$arg[1]}} and store warnings in ${$arg[2]}}.

replace

Hash ref. Used for enum to substitute one value with another. This parameter must be used to enable user to upgrade a configuration with obsolete values. For instance, if the value foo is obsolete and replaced by foo_better, you will need to declare:

replace => { foo => 'foo_better' }

The hash key can also be a regular expression for wider range replacement. The regexp must match the whole value:

replace => ( 'foo.*' => 'better_foo' }

In this case, a value will be replaced by better_foo if the /^foo.*$/ regexp matches.

replace_follow

Path specifying a hash of value element in the configuration tree. The hash if used in a way similar to the replace parameter. In this case, the replacement is not coded in the model but specified by the configuration.

refer_to

Specify a path to an id element used as a reference. See "Value Reference" for details.

computed_refer_to

Specify a path to an id element used as a computed reference. See "Value Reference" for details.

warp

See section below: "Warp: dynamic value configuration".

help

You may provide detailed description on possible values with a hash ref. Example:

help => { oui => "French for 'yes'", non => "French for 'no'"}

Value types

This modules can check several value types:

boolean: Accepts values 1 or 0, yes or no, true or false. The value read back is always 1 or 0.
enum: Enum choices must be specified by the choice parameter.
integer: Enable positive or negative integer
number: The value can be a decimal number
uniline: A one line string. I.e without "\n" in it.
string: Actually, no check is performed with this type.
reference: Like an enum where the possible values (aka choice) is defined by another location if the configuration tree. See "Value Reference".

Warp: dynamic value configuration

The Warp functionality enable a Value object to change its properties (i.e. default value or its type) dynamically according to the value of another Value object locate elsewhere in the configuration tree. (See Config::Model::WarpedThing for an explanation on warp mechanism).

For instance if you declare 2 Value element this way:

$model ->create_config_class (
  name => "TV_config_class",
  element => [
    country => {
      type => 'leaf',
      value_type => 'enum', 
      choice => [qw/US Europe Japan/]
    },
    tv_standard => {
      type => 'leaf',
      value_type => 'enum',
      choice => [qw/PAL NTSC SECAM/]  
      warp => { 
        follow => { c => '- country' }, # this points to the warp master
        rules => { 
          '$c eq "US"'     => { default => 'NTSC'  },
          '$c eq "France"' => { default => 'SECAM' },
          '$c eq "Japan"'  => { default => 'NTSC'  },
          '$c eq "Europe"' => { default => 'PAL'   },
        }
      }
    },
  ]
);

Setting country element to US will mean that tv_standard has a default value set to NTSC by the warp mechanism.

Likewise, the warp mechanism enables you to dynamically change the possible values of an enum element:

state => {
     type => 'leaf',
     value_type => 'enum', # example is admittedly silly
     warp =>{ 
        follow => { c => '- country' },
        rules => { 
          '$c eq "US"'     => { choice => ['Kansas', 'Texas'    ]},
          '$c eq "Europe"' => { choice => ['France', 'Spain'    ]},
          '$c eq "Japan"'  => { choice => ['Honshu', 'Hokkaido' ]}
        }
     }
  }

Cascaded warping

Warping value can be cascaded: A can be warped by B which can be warped by C. But this feature should be avoided since it can lead to a model very hard to debug. Bear in mind that:

Warp loop are not detected and will end up in "deep recursion subroutine" failures.
If you declare "diamond" shaped warp dependencies, the results will depend on the order of the warp algorithm and can be unpredictable.
The keys declared in the warp rules (US, Europe and Japan in the example above) cannot be checked at start time against the warp master Value. So a wrong warp rule key will be silently ignored during start up and will fail at run time.

Value Reference

To set up an enumerated value where the possible choice depends on the key of a Config::Model::AnyId object, you must:

Set value_type to reference.
Specify the refer_to or computed_refer_to parameter. See refer_to parameter.

In this case, a IdElementReference object is created to handle the relation between this value object and the referred Id. See Config::Model::IdElementReference for details.

Introspection methods

The following methods returns the current value of the parameter of the value object (as declared in the model unless they were warped):

min
max
mandatory
choice
convert
value_type
default
upstream_default
index_value
element_name

name()

Returns the object name.

get_type

Returns leaf.

can_store()

Returns true if the value object can be assigned to. Return 0 for a read-only value (i.e. a computed value with no override allowed).

get_choice()

Query legal values (only for enum types). Return an array (possibly empty).

get_help ( [ on_value ] )

Returns the help strings passed to the constructor.

With on_value parameter, returns the help string dedicated to the passed value or undef.

Without parameter returns a hash ref that contains all the help strings.

error_msg

Returns the error messages of this object (if any)

warning_msg

Returns warning concerning this value. Returns a list in list context and a string in scalar context.

check_value ( value )

Check the consistency of the value.

check_value also accepts named parameters:

value
quiet: When non null, check will not try to get extra information from the tree. This is required in some cases to avoid loops in check, get_info, get_warp_info, re-check ...

In scalar context, return 0 or 1.

In array context, return an empty array when no error was found. In case of errors, returns an array of error strings that should be shown to the user.

has_fixes

Returns the number of fixes that can be applied to the current value.

apply_fixes

Applies the fixes to suppress the current warnings.

check( [ value => foo ] )

Like "check_value".

Will also display warnings on STDOUT unless silent parameter is set to 1. In this case,user is expected to retrieve them with warning_msg.

Without value argument, this method will check the value currently stored.

Information management

store( value )

Can be called as value => ..., check => yes|no|skip )

Store value in leaf element. check parameter can be used to skip validation check.

load_data( scalar_value )

Load scalar data. Data is simply forwarded to store.

fetch_custom

Returns the stored value if this value is different from a standard setting or built in setting. In other words, returns undef if the stored value is identical to the default value or the computed value or the built in value.

fetch_standard

Returns the standard value as defined by the configuration model. The standard value can be either a preset value, a computed value, a default value or a built-in default value.

fetch( ... )

Check and fetch value from leaf element. The method can have one parameter (the fetch mode) or several pairs:

mode

Whether to fetch default, custom, etc value. See below for details

check

Whether to check if the value is valid or not before returning it. Default is 'yes'. Possible value are

yes: Perform check and raise an exception for bad values
skip: Perform check and return undef for bad values
no: Do not check and return values even if bad

silent

When set to 1, warning are not displayed on STDOUT. User is expected to read warnings with warning_msg method.

According to the mode parameter, this method will return either:

empty mode parameter (default): Value entered by user or default value if the value is different from upstream_default
custom: The value entered by the user (if different from built in, preset, computed or default value)
preset: The value entered in preset mode
standard: The preset or computed or default or built in value.
default: The default value (defined by the configuration model)
upstream_default: The upstream_default value. (defined by the configuration model)
non_upstream_default: The custom or preset or computed or default value. Will return undef if either of this value is identical to the upstream_default value. This feature is useful to reduce data to write in configuration file.
allow_undef: This mode will accept to return undef for mandatory values. Normally, trying to fetch an undefined mandatory value leads to an exception.

user_value

Returns the value entered by the user. Does not use the default or computed value. Returns undef unless a value was actually stored.

fetch_preset

Returns the value entered in preset mode. Does not use the default or computed value. Returns undef unless a value was actually stored in preset mode.

get( path => ..., mode => ... , check => ... )

Get a value from a directory like path.

set( path , value )

Set a value from a directory like path.

Examples

Number with min and max values

bounded_number => {
   type       => 'leaf',
   value_type => 'number',
   min        => 1,
   max        => 4,
 },

Mandatory value

 mandatory_string => {
   type       => 'leaf',
   value_type => 'string',
   mandatory  => 1,
 },

 mandatory_boolean => {
   type       => 'leaf',
   value_type => 'boolean',
 },

Enum with help associated with each value

Note that the help specification is optional.

 enum_with_help => {
  type       => 'leaf',
  value_type => 'enum',
  choice     => [qw/a b c/],
  help       => { a => 'a help' }
},

Migrate old obsolete enum value

Legacy values a1, c1 and foo/.* are replaced with a, c and foo/.

with_replace => {
  type       => 'leaf',
  value_type => 'enum',
  choice     => [qw/a b c/],
  replace    => {
      a1       => 'a',
      c1       => 'c',
      'foo/.*' => 'foo',
  },
},

Enforce value to match a regexp

An exception will be triggered if the value does not match the match regular expression.

match => {
  type       => 'leaf',
  value_type => 'string',
  match      => '^foo\d{2}$',
},

Enforce value to match a Parse::RecDescent grammar

prd_match => {
  type       => 'leaf',
  value_type => 'string',
  grammar    => q{ 
      token (oper token)(s?)
      oper: 'and' | 'or'
      token: 'Apache' | 'CC-BY' | 'Perl' 
  },
},

Issue a warning if a value matches a regexp

Issue a warning if the string contains upper case letters. Propose a fix that translate all capital letters to lower case.

 warn_if_capital => {
   type          => 'leaf',
   value_type    => 'string',
   warn_if_match => { '/A-Z/' => { fix => '$_ = lc;' } },
 },

A specific warning can be specified:

warn_if_capital => {
  type          => 'leaf',
  value_type    => 'string',
  warn_if_match => { 
      '/A-Z/' => { 
          fix => '$_ = lc;' ,
          mesg =>'NO UPPER CASE PLEASE'
      } 
  },
},

Issue a warning if a value does NOT match a regexp

warn_unless => {
  type              => 'leaf',
  value_type        => 'string',
  warn_unless_match => { foo => { msg => '', fix => '$_ = "foo".$_;' } },
},

Always issue a warning

always_warn => {
  type       => 'leaf',
  value_type => 'string',
  warn       => 'Always warn whenever used',
},

Computed values

See "Examples" in Config::Model::ValueComputer.

Upgrade

Upgrade is a special case when the configuration of an application has changed. Some parameters can be removed and replaced by another one. To avoid trouble on the application user side, Config::Model offers a possibility to handle the migration of configuration data through a special declaration in the configuration model.

This declaration must:

Declare the deprecated parameter with a status set to deprecated
Declare the new parameter with the instructions to load the semantic content from the deprecated parameter. These instructions are declared in the migrate_from parameters (which is similar to the compute parameter)

Here an example where a URL parameter is changed to a set of 2 parameters (host and path):

       'old_url' => { type => 'leaf',
		      value_type => 'uniline',
		      status => 'deprecated',
		    },
       'host' 
       => { type => 'leaf',
	    value_type => 'uniline',
            # the formula must end with '$1' so the result of the capture is used
            # as the host value
	    migrate_from => { formula => '$old =~ m!http://([\w\.]+)!; $1 ;' , 
			      variables => { old => '- old_url' } ,
			      use_eval => 1 ,
			    },
			},
       'path' => { type => 'leaf',
		   value_type => 'uniline',
		   migrate_from => { formula => '$old =~ m!http://[\w\.]+(/.*)!; $1 ;', 
				     variables => { old => '- old_url' } ,
				     use_eval => 1 ,
				   },
		 },

EXCEPTION HANDLING

When an error is encountered, this module may throw the following exceptions:

Config::Model::Exception::Model
Config::Model::Exception::Formula
Config::Model::Exception::WrongValue
Config::Model::Exception::WarpError

See Config::Model::Exception for more details.

AUTHOR

Dominique Dumont, (ddumont at cpan dot org)

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)