NAME
Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx
VERSION
version 1.260
DESCRIPTION
Configuration classes used by Config::Model
Elements
Model
Select the LCD model Optional. Type enum. choice: '12232', '12832', '1602'. upstream_default: '12232'.
Device
Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.
Size
Select the LCD size Optional. Type uniline. upstream_default: 'dependingonmodel:12232:20x4,12832:21x4,1602:16x2'.
Speed
Set the communication speed Optional. Type enum. choice: '9600', '19200'. upstream_default: '19200'.
Reboot
Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Keypad
If you have a keypad connected. Keypad layout is currently not configureable from the config file.Optional. Type uniline. default: 'yes'.
keypad_test_mode
If you have a non-standard keypad you can associate any keystrings to keys. There are 6 input keys in the CwLnx hardware that generate characters from 'A' to 'F'.
The following is the built-in default mapping hardcoded in the driver. You can leave those unchanged if you have a standard keypad. You can change it if you want to report other keystrings or have a non standard keypad. KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right KeyMap_E=Enter KeyMap_F=Escape keypad_test_mode permits one to test keypad assignement Default value is no. Optional. Type uniline. default: 'yes'.