NAME
Config::Model::models::LCDd::hd44780 - Configuration class LCDd::hd44780
VERSION
version 1.260
DESCRIPTION
Configuration classes used by Config::Model
Elements
ConnectionType
Select what type of connection. See documentation for types.Optional. Type uniline. default: '4bit'.
Port
Port where the LPT is Optional. Type enum. choice: '0x278', '0x378', '0x3BC'.
Device
Device of the serial interface Optional. Type uniline. upstream_default: '/dev/lcd'.
Speed
Bitrate of the serial port (0 for interface default)Optional. Type uniline. default: '0'.
Keypad
If you have a keypad connected. You may also need to configure the keypad layout further on in this file.Optional. Type uniline. default: 'no'.
Contrast
Set the initial contrast (bwctusb and lcd2usb) Optional. Type integer. upstream_default: '500'.
Brightness
Set brightness of the backlight (lcd2usb only) Optional. Type integer. upstream_default: '0'.
OffBrightness
Optional. Type uniline. default: '0'.
Backlight
If you have a switchable backlight.Optional. Type uniline. default: 'no'.
OutputPort
If you have the additional output port ("bargraph") and you want to be able to control it with the lcdproc OUTPUT command. Optional. Type uniline. default: 'no'.
Lastline
Specifies if the last line is pixel addressable or it controls an underline effect. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'true(=pixeladdressable)'.
Size
Specifies the size of the LCD. In case of multiple combined displays, this should be the total size.Optional. Type uniline. default: '20x4'.
vspan
For multiple combined displays: how many lines does each display have. Vspan=2,2 means both displays have 2 lines.Optional. Type uniline. default: '2,2'.
ExtendedMode
If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', set this flag to get into extended mode (4-line linear).Optional. Type uniline. default: 'yes'.
LineAddress
In extended mode, on some controllers like the ST7036 (in 3 line mode) the next line in DDRAM won't start 0x20 higher. Optional. Type uniline. upstream_default: '0x20'.
CharMap
Character map to to map ISO-8859-1 to the LCD's character set. Optional. Type enum. choice: 'hd44780_default', 'hd44780_euro', 'ea_ks0073', 'sed1278f_0b', 'hd44780_koi8_r'. upstream_default: 'hd44780_default'.
DelayMult
If your display is slow and cannot keep up with the flow of data from LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 to increase the delays. Default: 1.Optional. Type uniline. default: '2'.
KeepAliveDisplay
Some displays (e.g. vdr-wakeup) need a message from the driver to that it is still alive. When set to a value bigger then null the character in the upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.Optional. Type uniline. default: '0'.
RefreshDisplay
If you experience occasional garbage on your display you can use this option as workaround. If set to a value bigger than null it forces a full screen refresh <RefreshDiplay> seconds. Default: 0.Optional. Type uniline. default: '5'.
DelayBus
You can reduce the inserted delays by setting this to false. On fast PCs it is possible your LCD does not respond correctly. Default: true.Optional. Type uniline. default: 'true'.
KeyMatrix_4_1
If you have a keypad you can assign keystrings to the keys. See documentation for used terms and how to wire it. For example to give directly connected key 4 the string "Enter", use: KeyDirect_4=Enter For matrix keys use the X and Y coordinates of the key: KeyMatrix_1_3=Enter. Optional. Type uniline. default: 'Enter'.
KeyMatrix_4_2
Optional. Type uniline. default: 'Up'.
KeyMatrix_4_3
Optional. Type uniline. default: 'Down'.
KeyMatrix_4_4
Optional. Type uniline. default: 'Escape'.