NAME
Config::Model::models::LCDd::glcd - Configuration class LCDd::glcd
VERSION
version 0.001
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Brightness
Set brightness of the backlight if the backlight is switched 'on'.Optional. Type integer. upstream_default: '800'.
CellSize
Width and height of a character cell in pixels. This value is only used if the driver has been compiled with FreeType and it is enabled. Otherwise the default 6x8 cell is used.Optional. Type uniline. default: '12x16'.
ConnectionType
Select what type of connection. See documentation for types.Optional. Type uniline. default: 't6963'.
Contrast
Set the initial contrast if supported by connection type.Optional. Type integer. upstream_default: '600'.
KeyMap_A
Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'. By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape.Optional. Type uniline. default: 'Up'.
KeyMap_B
Optional. Type uniline. default: 'Down'.
KeyMap_C
Optional. Type uniline. default: 'Enter'.
KeyMap_D
Optional. Type uniline. default: 'Escape'.
KeyRepeatDelay
Time (ms) from first key report to first repeat. Set to 0 to disable repeated key reports. Optional. Type integer. upstream_default: '500'.
KeyRepeatInterval
Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled (set to zero). Optional. Type integer. upstream_default: '300'.
OffBrightness
Set brightness of the backlight if the backlight is switched 'off'. Set this to zero to completely turn off the backlight. Optional. Type integer. upstream_default: '100'.
Port
t6963: Parallel port to use Optional. Type uniline. upstream_default: '0x378'.
Size
Width and height of the display in pixel. The supported sizes may depend on the ConnectionType. Optional. Type uniline. upstream_default: '128x64'.
bidirectional
t6963: Use LPT port in bi-directional mode. This should work on most LPT port and is required for proper timing! Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.
delayBus
t6963: Insert additional delays into reads / writes. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
fontHasIcons
Some fonts miss the Unicode characters used to represent icons. In this case the built-in 5x8 font can used if this option is turned off. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.
normal_font
Path to font file to use for FreeType rendering. This font must be monospace and should contain some special Unicode characters like arrows (Andale Mono is recommended and can be fetched at http://corefonts.sf.net).Optional. Type uniline. default: '/usr/local/lib/X11/fonts/TTF/andalemo.ttf'.
serdisp_device
serdisplib: The display device to use, e.g. serraw:/dev/ttyS0, parport:/dev/parport0 or USB:07c0/1501.Optional. Type uniline. default: '/dev/ppi0'.
serdisp_name
serdisplib: Name of the underlying serdisplib driver, e.g. ctinclud. See serdisplib documentation for details.Optional. Type uniline. default: 't6963'.
serdisp_options
serdisplib: Options string to pass to serdisplib during initialization. Use this to set any display related options (e.g. wiring). The display size is always set based on the Size configured above! By default, no options are set. Important: The value must be quoted as it contains equal signs!Optional. Type uniline. default: 'INVERT'.
useFT2
If LCDproc has been compiled with FreeType 2 support this option can be used to turn if off intentionally. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'yes'.