NAME
piflash - Raspberry Pi SD-flashing script with safety checks to avoid erasing the wrong device
VERSION
version 0.0.2
SYNOPSIS
piflash [--verbose] input-file output-device
piflash [--verbose] --SDsearchDESCRIPTION
The "piflash" program flashes an SD card for a Raspberry Pi single-board computer. It includes safety checks so that it can only erase and write to an SD card, not another device on the system. The safety checks are probably of most use to beginners. For more advanced users (like the author) it also has the convenience of flashing directly from the file formats downloadable from raspberrypi.org without extracting a .img file from a zip/gz/xz file.
The optional parameter --verbose makes much more verbose status and error messages. Use this when troubleshooting any problem or preparing program output to ask for help or report a bug.
input-file is the path of the binary image file used as input for flashing the SD card. If it's a .img file then it will be flashed directly. If it's a gzip (.gz), xz (.xz) or zip (.zip) file then the .img file will be extracted from it to flash the SD card. It is not necessary to unpack the file if it's in one of these formats. This covers most of the images downloadable from the Raspberry Pi foundation's web site.
output-file is the path to the block device where the SSD card is located. The device should not be mounted - if it ismounted the script will detect it and exit with an error. This operation will erase the SD card and write the new image from the input-file to it. (So make sure it's an SD card you're willing to have erased.)
The --SDsearch parameter tells piflash to print a list of device names for SD cards available on the system and then exit. Do not specify an input file or output device when using this option - it will exit before they would be used.
Safety Checks
The program makes a number of safety checks for you. Since the SD card flashing process may need root permissions, these are considered prudent precautions.
The input file's format will be checked. If it ends in .img then it will be flashed directly as a binary image file. If it ends in .xz, .gzip or .zip, it will extract the binary image from the file. If the filename doesn't have a suffix, libmagic will be used to inspect the contents of the file (for "magic numbers") to determine its format.
The output device must be a block device.
If the output device is a mounted filesystem, it will refuse to erase it.
If the output device is not an SD card, it will refuse to erase it. Piflash has been tested with USB and PCI based SD card interfaces.
Automated Flashing Procedure
Piflash automates the process of flashing an SD card from various Raspberry Pi OS images.
For most disk images, either in a raw *.img file, compressed in a *.gz or *.xz file, or included in a *.zip archive, piflash recognizes the file format and extracts the disk image for flashing, eliminating the step of uncompressing or unarchiving it before it can be flashed to the SD.
For zip archives, it checks if it contains the Raspberry Pi NOOBS (New Out Of the Box System), in which case it handles it differently. The steps it takes are similar to the instructions that one would have to follow manually. It formats a new VFAT filesystem on the card. (FAT/VFAT is the only format recognized by the Raspberry Pi's simple boot loader.) Then it copies the contents of the zip archive into the card, automating the entire flashing process even for a NOOBS system, which previously didn't even have instructions to be done from Linux systems.
INSTALLATION
The piflash script only works on Linux systems. It depends on features of the Linux kernel to look up whether the output device is an SD card and other information about it. It has been tested so far on Fedora 25, and some experimentation with Ubuntu 16.04 (in a virtual machine) to get the kernel parameters right for a USB SD card reader.
System Dependencies
Some programs and libraries must be installed on the system for piflash to work - most packages have such dependencies.
On RPM-based Linux systems (Red Hat, Fedora, CentOS) the following command, run as root, will install the dependencies.
dnf install coreutils util-linux sudo perl file-libs perl-File-LibMagic perl-IO gzip unzip xz e2fsprogs dosfstoolsOn Deb-based Linux systems (Debian, Ubuntu, Raspbian) the following command, run as root, will install the dependencies.
apt-get install coreutils util-linux klibc-utils sudo perl-base libmagic1 libfile-libmagic-perl gzip xz-utils e2fsprogs dosfstoolsOn source-based or other Linux distributions, make sure the following are installed:
- programs: blockdev, dd, echo, gunzip, lsblk, mkdir, mkfs.vfat, mount, perl, sfdisk, sudo, sync, true, umount, unzip, xz
- libraries: libmagic/file-libs, File::LibMagic (perl)
Piflash script
The piflash script can be downloaded with either of these commands.
curl -L https://github.com/ikluft/ikluft-tools/raw/master/piflash/piflash > piflashor
wget https://github.com/ikluft/ikluft-tools/raw/master/piflash/piflashBug reporting
Report bugs via GitHub at https://github.com/ikluft/ikluft-tools/issues - this location may eventually change if piflash becomes popular enough to warrant having its own source code repository.
When reporting a bug, please include the full output using the --verbose option. That will include all of the program's state information, which will help understand the bigger picture what was happening on your system. Feel free to remove information you don't want to post in a publicly-visible bug report - though it's helpful to add "[redacted]" where you removed something so it's clear what happened.
For any SD card reader hardware which piflash fails to recognize (and therefore refuses to write to), please describe the hardware as best you can including name, product number, bus (USB, PCI, etc), any known controller chips.
AUTHOR
Ian Kluft <cpan-dev@iankluft.com>
COPYRIGHT AND LICENSE
This software is Copyright (c) 2017-2018 by Ian Kluft.
This is free software, licensed under:
The Apache License, Version 2.0, January 2004