NAME

AnyEvent::Stomper - Flexible non-blocking STOMP client

SYNOPSIS

use AnyEvent;
use AnyEvent::Stomper;

my $stomper = AnyEvent::Stomper->new(
  host       => 'localhost',
  prot       => '61613',
  login      => 'guest',
  passcode   => 'guest',
);

my $cv = AE::cv;

$stomper->subscribe(
  id          => 'foo',
  destination => '/queue/foo',

  on_receipt => sub {
    my $err = $_[1];

    if ( defined $err ) {
      warn $err->message . "\n";
      $cv->send;

      return;
    }

    $stomper->send(
      destination => '/queue/foo',
      body        => 'Hello, world!',
    );
  },

  on_message => sub {
    my $msg = shift;

    my $body = $msg->body;
    print "Consumed: $body\n";

    $cv->send;
  }
);

$cv->recv;

DESCRIPTION

AnyEvent::Stomper is flexible non-blocking STOMP client. Supports following STOMP versions: 1.0, 1.1, 1.2.

Is recommended to read STOMP protocol specification before using the client: https://stomp.github.io/index.html

CONSTRUCTOR

new( %params )

my $stomper = AnyEvent::Stomper->new(
  host               => 'localhost',
  port               => '61613',
  login              => 'guest',
  passcode           => 'guest',
  vhost              => '/',
  heartbeat          => [ 5000, 5000 ],
  connection_timeout => 5,
  lazy               => 1,
  reconnect_interval => 5,

  on_connect => sub {
    # handling...
  },

  on_disconnect => sub {
    # handling...
  },

  on_error => sub {
    my $err = shift;

    # error handling...
  },
);

host => $host

Server hostname (default: localhost)

port => $port

Server port (default: 61613)

login => $login

The user identifier used to authenticate against a secured STOMP server.

passcode => $passcode

The password used to authenticate against a secured STOMP server.

vhost => $vhost

The name of a virtual host that the client wishes to connect to.

heartbeat => \@heartbeat

Heart-beating can optionally be used to test the healthiness of the underlying TCP connection and to make sure that the remote end is alive and kicking. The first number sets interval in milliseconds between outgoing heart-beats to the STOMP server. 0 means, that the client will not send heart-beats. The second number sets interval in milliseconds between incoming heart-beats from the STOMP server. 0 means, that the client does not want to receive heart-beats.

heartbeat => [ 5000, 5000 ],

Not set by default.

connection_timeout => $connection_timeout

Specifies connection timeout. If the client could not connect to the server after specified timeout, the on_error callback is called with the E_CANT_CONN error. The timeout specifies in seconds and can contain a fractional part.

connection_timeout => 10.5,

By default the client use kernel's connection timeout.

lazy => $boolean

If enabled, the connection establishes at time when you will send the first command to the server. By default the connection establishes after calling of the new method.

Disabled by default.

reconnect_interval => $reconnect_interval

If the parameter is specified, the client will try to reconnect only after this interval. Commands executed between performance will be queued.

reconnect_interval => 5,

Not set by default.

handle_params => \%params

Specifies AnyEvent::Handle parameters.

handle_params => {
  autocork => 1,
  linger   => 60,
}

Enabling of the autocork parameter can improve performance. See documentation on AnyEvent::Handle for more information.

on_connect => $cb->()

The on_connect callback is called when the connection is successfully established.

Not set by default.

on_disconnect => $cb->()

The on_disconnect callback is called when the connection is closed by any reason.

Not set by default.

on_error => $cb->( $err )

The on_error callback is called when occurred an error, which was affected on entire client (e. g. connection error or authentication error). Also the on_error callback is called on command errors if the command callback is not specified. If the on_error callback is not specified, the client just print an error messages to STDERR.

COMMAND METHODS

To execute the STOMP command you must call appropriate method. STOMP headers can be specified as command parameters. The client automatically adds content-length header to all outgoing frames. Every command method can also accept two additional parameters: the body parameter where you can specify the body of the frame, and the on_receipt parameter that is the alternative way to specify the command callback.

If you want to receive RECEIPT frame, you must specify receipt header. The receipt header can take the special value auto. If it set, the receipt identificator will be generated automatically by the client. The RECEIPT frame is passed to the command callback in first argument as the object of the class AnyEvent::Stomper::Frame. If the receipt header is not specified the first argument of the command callback will be undef.

For commands SUBSCRIBE, UNSUBSCRIBE, DISCONNECT the client automatically adds receipt header for internal usage.

The command callback is called in one of two cases depending on the presence of the receipt header: when the command was successfully sent to the server or when the RECEIPT frame will be received. If any error occurred during the command execution, the error object is passed to the callback in second argument. Error object is the instance of the class AnyEvent::Stomper::Error.

The command callback is optional. If it is not specified and any error occurred, the on_error callback of the client is called.

The full list of all available headers for every command you can find in STOMP protocol specification and in documentation on your STOMP server. For various versions of STOMP protocol and various STOMP servers they can be differ.

send( [ %params ] [, $cb->( $receipt, $err ) ] )

Sends a message to a destination in the messaging system.

$stomper->send(
  destination => '/queue/foo',
  body        => 'Hello, world!',
);

$stomper->send(
  destination => '/queue/foo',
  body        => 'Hello, world!',

  sub {
    my $err = $_[1];

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      # error handling...

      return;
    }
  }
);

$stomper->send(
  destination => '/queue/foo',
  receipt     => 'auto',
  body        => 'Hello, world!',

  on_receipt => sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      # error handling...

      return;
    }

    # receipt handling...
  }
);

The method is used to register to listen to a given destination. The subscribe method require the on_message callback, which is called on every received MESSAGE frame from the server. The MESSAGE frame is passed to the on_message callback in first argument as the object of the class AnyEvent::Stomper::Frame. If the subscribe method is called with one callback, this callback will be act as on_message callback.

$stomper->subscribe(
  id          => 'foo',
  destination => '/queue/foo',

  sub {
    my $msg = shift;

    my $headers = $msg->headers;
    my $body    = $msg->body;

    # message handling...
  },
);

$stomper->subscribe(
  id          => 'foo',
  destination => '/queue/foo',
  ack         => 'client',

  on_receipt => sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      return;
    }

    # receipt handling...
  },

  on_message => sub {
    my $msg = shift;

    my $headers = $msg->headers;
    my $body    = $msg->body;

    # message handling...
  }
);

unsubscribe( [ %params ] [, $cb->( $receipt, $err ) ] )

The method is used to remove an existing subscription.

$stomper->unsubscribe(
  id          => 'foo',
  destination => '/queue/foo',

  sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      return;
    }

    # receipt handling...
  }
);

ack( [ %params ] [, $cb->( $receipt, $err ) ] )

The method is used to acknowledge consumption of a message from a subscription using client or client-individual acknowledgment. Any messages received from such a subscription will not be considered to have been consumed until the message has been acknowledged via an ack() method.

$stomper->ack( id => $ack_id );

$stomper->ack(
  id      => $ack_id,
  receipt => 'auto',

  sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      # error handling...
    }

    # receipt handling...
  }
);

nack( [ %params ] [, $cb->( $receipt, $err ) ] )

The nack method is the opposite of ack method. It is used to tell the server that the client did not consume the message.

$stomper->nack( id => $ack_id );

$stomper->nack(
  id      => $ack_id,
  receipt => 'auto',

  sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      # error handling...
    }

    # receipt handling...
  }
);

begin( [ %params ] [, $cb->( $receipt, $err ) ] )

The method begin is used to start a transaction.

commit( [ %params ] [, $cb->( $receipt, $err ) ] )

The method commit is used to commit a transaction.

abort([ %params ] [, $cb->( $receipt, $err ) ] )

The method abort is used to roll back a transaction.

disconnect( [ %params ] [, $cb->( $receipt, $err ) ] )

A client can disconnect from the server at anytime by closing the socket but there is no guarantee that the previously sent frames have been received by the server. To do a graceful shutdown, where the client is assured that all previous frames have been received by the server, you must call disconnect method and wait for the RECEIPT frame.

execute( $command, [ %params ] [, $cb->( $receipt, $err ) ] )

An alternative method to execute commands. In some cases it can be more convenient.

$stomper->execute( 'SEND',
  destination => '/queue/foo',
  receipt     => 'auto',
  body        => 'Hello, world!',

  sub {
    my $receipt = shift;
    my $err     = shift;

    if ( defined $err ) {
      my $err_msg   = $err->message;
      my $err_code  = $err->code;
      my $err_frame = $err->frame;

      # error handling...

      return;
    }

    # receipt handling...
  }
);

ERROR CODES

Every error object, passed to callback, contain error code, which can be used for programmatic handling of errors. AnyEvent::Stomper provides constants for error codes. They can be imported and used in expressions.

use AnyEvent::Stomper qw( :err_codes );

E_CANT_CONN: Can't connect to the server. All operations were aborted.
E_IO: Input/Output operation error. The connection to the STOMP server was closed and all operations were aborted.
E_CONN_CLOSED_BY_REMOTE_HOST: The connection closed by remote host. All operations were aborted.
E_CONN_CLOSED_BY_CLIENT: Connection closed by client prematurely. Uncompleted operations were aborted
E_OPRN_ERROR: Operation error. For example, missing required header.
E_UNEXPECTED_DATA: The client received unexpected data from the server. The connection to the STOMP server was closed and all operations were aborted.
E_READ_TIMEDOUT: Read timed out. The connection to the STOMP server was closed and all operations were aborted.

OTHER METHODS

host()

Gets current host of the client.

port()

Gets current port of the client.

connection_timeout( [ $fractional_seconds ] )

Gets or sets the connection_timeout of the client. The undef value resets the connection_timeout to default value.

reconnect_interval( [ $fractional_seconds ] )

Gets or sets reconnect_interval of the client.

on_connect( [ $callback ] )

Gets or sets the on_connect callback.

on_disconnect( [ $callback ] )

Gets or sets the on_disconnect callback.

on_error( [ $callback ] )

Gets or sets the on_error callback.

force_disconnect()

The method for forced disconnection. All uncompleted operations will be aborted.

CONNECTION POOL

If you have the cluster or set of STOMP servers, you can use AnyEvent::Stomper::Pool to work with them.

AUTHOR

Eugene Ponizovsky, <ponizovsky@gmail.com>

Sponsored by SMS Online, <dev.opensource@sms-online.com>

COPYRIGHT AND LICENSE

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

To install AnyEvent::Stomper, copy and paste the appropriate command in to your terminal.

cpanm

cpanm AnyEvent::Stomper

CPAN shell

perl -MCPAN -e shell
install AnyEvent::Stomper

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

CONSTRUCTOR

new( %params )

COMMAND METHODS

send( [ %params ] [, $cb->( $receipt, $err ) ] )

subscribe( [ %params ] [, $cb->( $msg ) ] )

unsubscribe( [ %params ] [, $cb->( $receipt, $err ) ] )

ack( [ %params ] [, $cb->( $receipt, $err ) ] )

nack( [ %params ] [, $cb->( $receipt, $err ) ] )

begin( [ %params ] [, $cb->( $receipt, $err ) ] )

commit( [ %params ] [, $cb->( $receipt, $err ) ] )

abort([ %params ] [, $cb->( $receipt, $err ) ] )

disconnect( [ %params ] [, $cb->( $receipt, $err ) ] )

execute( $command, [ %params ] [, $cb->( $receipt, $err ) ] )

ERROR CODES

OTHER METHODS

host()

port()

connection_timeout( [ $fractional_seconds ] )

reconnect_interval( [ $fractional_seconds ] )

on_connect( [ $callback ] )

on_disconnect( [ $callback ] )

on_error( [ $callback ] )

force_disconnect()

CONNECTION POOL

SEE ALSO

AUTHOR

COPYRIGHT AND LICENSE

Module Install Instructions