NAME
whim - A Webmention multitool
SYNOPSIS
Listen for webmentions at port 3000, and store any that arrive.
$ whim listen start # Also launches a webserver for displaying webmentions!Verify recently arrived webmentions
$ whim verifySee summaries of received, valid webmentions
$ whim query --after=2020-01-01
$ whim query --target=my-site.example.com/some/articleBlock a domain from further consideration
$ whim query --block=trollface.exampleSend one webmention
$ whim send https://my-site.example.com/some/article \
https://another-site.example/target/articleSend webmentions to all valid targets found in a page's content
$ whim send https://my-site.example.com/some/articleDESCRIPTION
Whim is a "webmention multitool" that lets you receive, send, view, and display webmentions for your website.
Its main interface is the whim command-line program, which has various sub-commands. You can run whim help (or just whim, with no arguments) at any time to see a summary of available commands.
Concepts
Concepts to understand to get the most out of Whim:
Whim's home directory
Whim keeps its data, logs, and other important information in a home directory. By default, this is .whim/ within your own home directory. Whim will try to create it if it doesn't already exist, and will complain if it can't.
You can set this location to something other than the default via the WHIM_HOME environment variable.
Webmention
Webmention is a W3C standard that -- especially when combined with semantic markup through microformats -- allows for surprisingly rich interactions among the authors of otherwise unconnected websites, running at different domains.
For introductory information and resources about Webmention, see https://jmac.org/webmention/.
Blocklist
Whim lets you maintain a blocklist against which it filters every webmention's source prior to displaying it, or returning it as part of any other query. An entry in Whim's blocklist is a simple string, and Whim will block any webmention whose source contains that string.
For example, if the blocklist contains "https://foobar.example.com/blah" as an element, Whim will block a webmention with the source `https://foobar.example.com/blah/bazzle.html`, but not `https://foobar.example.com/baz`.
Blocklist elements needn't be full URLs like this; you could block every webmention whose source URL contained the substring `foo` at all, if you wished.
Whim will continue to store, verify, and perform other actions as needed with blocked webmentions. It just won't display them to you, until and unless you remove the relevant blocks from its blocklist.
Commands
listen
whim listen start whim listen -l http://*:8080 start
whim listen -l 'https://*:3000?cert=./server.crt&key=./server.key' \
start
whim listen stopRuns a daemon that listens for webmentions, and also displays stored webmentions on request.
By default, the daemon listens on port 3000, but you can adjust this with command-line options. See whim help listen for a more complete list of options available.
Its required final argument is a typical daemon-control directive: start, stop, restart, or status. Whim's listener daemon will log to log/listen.log within Whim's home directory.
Storing webmentions
The listener will automatically store all received well-formed webmentions in its database, but will not process them. You must call whim verify as a separate step to do that. (This all happens in accordance with W3C's Webmention spec, which recommends that receipt and processing take place asynchronously.)
The listener will respond to GET requests at the path / with a simple message that it's up and running. (Actual webmentions arrive via POST at /.)
Displaying webmentions
Furthermore, the listener sets up GET endpoints at /display_wms and /summarize_wms that will return HTML representations of webmentions whose source matches the value of a given url query-string argument. These two endpoints return a detailed list of webmentions akin to a comments section, and a very small numeric summary of reactions received, respectively.
For example:
https://my-site.example:3000/display_wms?url=http://source.exampleWhim has its own default templates for displaying webmentions like this. You can override them in whole or in part with custom template files, as described in "Templates", below.
query
# See summaries of received, valid webmentions
whim query --after=2020-01-01
whim query --target=my-site.example.com/some/article
# Block a domain from further consideration
whim query --block=trollface.exampleDisplay, as human-readable summaries printed to standard output, verified webmentions that match the given criteria. (If no criteria are given, then Whim prints every verified webmention it knows about.)
For a full list of options, type `whim help query`.
The `query` command also gives you controls to view and update Whim's blocklist.
send
# Try to send one webmention
whim send http://source.example/path/to/page \
http://target.example/path/to/another/page
# Try to send many webmentions
whim send http://source.example/path/to/pageTry to send webmentions, based on the one or two URLs given as arguments. It prints a short description of what it did to standard output.
(Note that attempts to send webmentions often end in failure, simply because the target URL does not advertise a webmention endpoint, leaving Whim with no place to actually send it. This is not unusual, and thus all the rather passive-sounding "try to send" language used here.)
If you call whim send with two arguments, it will try to send a single webmention, using the two URLs as the webmention's source and target, respectively.
If called with one argument, it will attempt to load the document at that URL, and then try to determine which part of that document represents the content (as opposed to comments, headers and sidebars, and the like). If it gets this far, then it will attempt to send a webmention for every webmention-valid hyperlink found within.
Whim tries to determine content by locating an h-entry microformat with an e-content property within the document's HTML. If it can't find anything like that, then it will send no webmentions.
verify
whim verifyAttempt to verify all unprocessed webmentions in Whim's database -- those with no validation attempts made on them. This is the initial state of every webmention that Whim receives and stores; you can think of the collection of unprocessed webmentions as Whim's "inbox".
Whim will try to load the content from every unprocessed webmention's source, and confirm that it really does link to the target URL. If it does, it will mark it as verified. Otherwise, it will mark it as unverified. In either case, Whim will consider the webmention "processed", and not subject to future verification attempts.
This command is suitable for calling as a cron task, or through some other method asynchronous from the initial receipt and storage of webmentions, as recommended in the Webmention standard. Note that it might take a while to run, depending upon the size of the unprocessed-webmention queue.
Templates
Whim will check for templates in templates/ within its home directory before falling back to its built-in default templates. At this time, Whim expects templates to be Mojo "embedded Perl" template files.
Whim directly calls only one template, which it expects to find at webmentions.html.ep. It passes this template the following Perl variables:
webmention_count, the total number of verified webmentions the given URL has received.
webmentions, a hash reference containing object representations of all the webmentions the given URL has received, sorted under hash-keys named after webmention types.
Possible keys include:
mention
like
repost
rsvp
quotation
reply
The webmentions are Web::Mention objects, as described at that manual page.
My best advice for starting custom templates, at this time, involves looking at the default templates in Whim's source code, found in lib/Whim/templates, and seeing how it works there. Yes, this is not very good advice. I really do want to make this easier! But, it's all we have for now.
Notes
Project status
At the time of this writing (summer 2020), this project is very young, and under active development as its author and other contributors work to find its desired shape.
While Whim works right now, it is still rough around the edges, and probably full of both bugs and fundamental design flaws. Details about the commands below are subject to change dramatically in future releases.
Support
The
#whimchannel on Libera Chat
The author very much welcomes questions, bug reports, and other communication about Whim via any of these channels.
AUTHOR
Jason McIntosh <jmac@jmac.org>