NAME

SPVM::Document::NativeAPI - SPVM Native APIs

DESCRIPTION

SPVM Native APIs is C APIs used in SPVM native method. This document describes the way to define native methods, and shows the all of SPVM Native APIs. If you want to know the list of Native APIs, see List of Native APIs.

Native method can be written by C language or C++, If the code is compatible with C language or C++(for example, CUDA/nvcc), it can be compiled into native method. If you see examples of SPVM Native APIs, see Examples using SPVM Native APIs. This contains the examples of C language, C++ and CUDA/nvcc.

Defintion of SPVM Native Method

Native Method Declaration

Native Method Declaration is written using Method Descriptor "native" in SPVM module file. SPVM Native Method Declaration ends with a semicolon without Sobroutine Block.

# SPVM/Foo/Bar.spvm
class Foo::Bar {
  native static method sum : int ($num1 : int, $num2 : int);
}

SPVM Native Config File

SPVM Native Config File must be created for SPVM Native Method. The base name without the extension of native config file must be same as SPVM module file and the extension must be ".config".

# Native configuration file for Foo::Bar module
SPVM/Foo/Bar.config

If native configuration file does not exist, an exception occurs.

Native Config File is Perl source code. Native Config File must return properly Builder::Config object, otherwise an exception occurs.

C99 Config File Example

# C99 Config File
use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_c99;

$config;

C11 Config File Example

# C11 Config File
use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_c;

$config->set_std('c11');

$config;

C++ Config File Example

# C++ Config File
use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_cpp;

$config;

C++11 Config File Example

# C++11 Config File
use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_cpp;

$config->set_std('c++11');

$config;

CUDA/nvcc Config File Example

use strict;
use warnings;

my $config = SPVM::Builder::Config->new;

# Compiler and Linker common
$config->set_cccdlflags(q(--compiler-options '-fPIC'));

# Compiler
$config->cc('nvcc');
$config->ccflags('');
$config->ext('cu');

# Linker
$config->ld('nvcc');
$config->ldflags('-shared');

$config;

Show the compile commands

# C99 Config File
use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_c99;

# Show the compile commands
$config->quiet(0);

$config;

Force the compiles

use strict;
use warnings;

use SPVM::Builder::Config;
my $config = SPVM::Builder::Config->new_c99;

# Show the compile commands
$config->force(1);

$config;

Native Method Definition

Native Method Definition is written in native source file. Native source file is basically C language source file which extension is ".c". This extension can be changed to ".cpp" for C++ source file, or ".cu" for CUDA source file, etc.

# Native source file for Foo::Bar module
SPVM/Foo/Bar.c

The following is natvie source file example written by C language.

#include "spvm_native.h"

int32_t SPVM__Foo__Bar__sum(SPVM_ENV* env, SPVM_VALUE* stack) {

  int32_t num1 = stack[0].ival;
  int32_t num2 = stakc[1].ival;

  int32_t total = num1 + num2;

  stack[0].ival = total;

  return 0;
}

Include spvm_native.h

Include "spvm_native.h" at the beginning of the native source file. This header file defines SPVM Native APIs and data structures for Native APIs.

spvm_native.h include the following types.

SPVM_ENV
SPVM_VALUE

See List of Native APIs about included SPVM Native APIs.

Return Value

The return type is "int32_t" type. If the method raises an exception, "1" is returned. If the method is succeed "0" is returned.

Function Name

Native Method Definition is a simple C language function such as

SPVM__Foo__Bar__sum

The function name starts with "SPVM__".

Followed by class name "Foo__Bar", which is replaced "::" in Foo::Bar.

Followed by "__".

Followed by method name "sum".

If Native Method Name is invalid, a compile error will occur.

There are two arguments, the first argument is "SPVM_ENV* env" which has the information of the execution environment, and the second argument is "SPVM_VALUE* stack" which is used for the argument and return value.

int32_t SPVM__Foo__Bar__sum(SPVM_ENV* env, SPVM_VALUE* stack) {

}

In the above sample, it takes two int type arguments of SPVM, calculates the sum, and returns the return value.

#include "spvm_native.h"

int32_t SPVM__Foo__Bar__sum(SPVM_ENV* env, SPVM_VALUE* stack) {

  int32_t num1 = stack[0].ival;
  int32_t num2 = stakc[1].ival;

  int32_t total = num1 + num2;

  stack[0].ival = total;

  return 0;
}

Compile Native Method

Native methods are compiled into a shared libraries. teay are shared libraries (.so) on Unix/Linux, dynamic link libraries (.dll) on Windows or etc corresponding to your os.

The compilation is done when SPVM is compiled. The build directory must exist, otherwise an exception occures.

The default build directory is the "~/.spvm_build" directory in the directory containing the executed Perl script, and can be changed with the environment variable "SPVM_BUILD_DIR".

If you want to use SPVM Native Method from Perl, create a "~/.spvm_build" directory in the directory where the executed Perl script exists.

~/.spvm_build

The generated object files exists under "work/object" under the build directory. The object file name is the name which the extension of the SPVM module name is changed to ".o".

~/.spvm_build/work/object/Foo/Bar.o

The generated shared libraries exists under "work/lib" under the build directory. The name of shared library is the name which the extension of the SPVM module name is changed to ".so", or etc corresponding to your os.

# Unix/Linux
~/.spvm_build/work/object/Foo/Bar.so

# Windows
~/.spvm_build/work/object/Foo/Bar.dll

Stack

The stack is the second argument of the definition of the Native Method. This is called stack. Stack is used getting arguments and return the value.

int32_t SPVM__Foo__Bar__sum(SPVM_ENV* env, SPVM_VALUE* stack) {

}

SPVM_VALUE is a union type of C language to store SPVM values. You can save integral value, floating point value, object value, and reference value to it.

For example, to get the value of the first argument(0th) of int type, write as follows.

int32_t args0 = stack[0].ival;

For example, to get the value of the second argument(1th) of long type, write as follows.

int64_t args1 = stack[1].lval;

For example, to return a value of double type, write as follows.

stack[0].dval = 0.5;

Getting Arguments

Get byte type argument

To get the SPVM byte argument, access the bval field. Assign to the C language int8_t type.

int8_t args0 = stack[0].bval;

Get short type argument

To get the short argument of SPVM, access the sval field. Assign it to the C language int16_t type.

int16_t args0 = stack[0].sval;

Get int type argument

To get the SPVM int type argument, access the ival field. Assign to the C language int32_t type.

int32_t args0 = stack[0].ival;

Get long type argument

To get the long argument of SPVM, access the lval field. Assign to the C language int64_t type.

int64_t args0 = stack[0].lval;

Get float type argument

To get the SPVM float type argument, access the fval field. Assign to float type of C language.

float args0 = stack[0].fval;

Get double type argument

To get the SPVM double argument, access the dval field. Assign to the C language double type.

double args0 = stack[0].dval;

Get object type argument

To get the SPVM object type argument, access the oval field. Assign it to void* type in C language.

void* args0 = stack[0].oval;

Get byte Reference Type Argument

If you get SPVM byte Reference Type argument, use "bref" field. it can be assinged to the value of C language int8_t* type.

int8_t* args0 = stack[0].bref;

Get short Reference Type Argument

If you get SPVM short Reference Type argument, use "sref" field. it can be assinged to the value of C language int16_t* type.

int16_t* args0 = stack[0].sref;

Get int Reference Type Argument

If you get SPVM int Reference Type argument, use "iref" field. it can be assinged to the value of C language int32_t* type.

int32_t* args0 = stack[0].iref;

Get long Reference Type Argument

If you get SPVM long Reference Type argument, use "lref" field. it can be assinged to the value of C language int64_t* type.

int64_t* args0 = stack[0].lref;

Get float Reference Type Argument

If you get SPVM float Reference Type argument, use "fref" field. it can be assinged to the value of C language float* type.

float* args0 = stack[0].fref;

Get double Reference Type Argument

If you get SPVM double Reference Type Argument, use "dref" field. it can be assinged to the value of C language double* type.

double* args0 = stack[0].dref;

Get multiple numeric type arguments

In a Native Method, multiple numeric type arguments are assigned to the coresponding multiple arguments.

For example, In the case of the argument values of Complex_2d type, you can get them by the following way.

double args_re = stack[0].dval;
double args_im = stack[1].dval;

Note that you cannot access the values by the field name of Complex_2d.

Return Value

Set return value of byte type

Use bval field of SPVM_VALUE to set a return value which type of SPVM is byte. This is corresponding to int8_t type of C language.

int8_t retval;
stack[0].bval = retval;

Set return value of short type

Use sval field of SPVM_VALUE to set a return value which type of SPVM is short. This is corresponding to int16_t type of C language.

int16_t retval;
stack[0].sval = retval;

Set return value of int type

Use ival field of SPVM_VALUE to set a return value which type of SPVM is int. This is corresponding to int32_t type of C language.

int32_t retval;
stack[0].ival = retval;

Set long type return value

Use lval field of SPVM_VALUE to set a return value which type of SPVM is long. This is corresponding to int64_t type of C language.

int64_t retval;
stack[0].lval = retval;

Set return value of float type

Use fval field of SPVM_VALUE to set a return value which type of SPVM is float. This is corresponding to float type of C language.

float retval;
stack[0].fval = retval;

Set return value of double type

Use dval field of SPVM_VALUE to set a return value which type of SPVM is double. This is corresponding to double type of C language.

double retval;
stack[0].dval = retval;

Set return value of object type

Use oval field of SPVM_VALUE to set a return value which type of SPVM is object. This is corresponding to void* type of C language.

void* retval;
stack[0].oval = retval;

Set multiple numeric return value

If you set multiple numeric return value in native method, set multiple return values.

For example, in the case of Complex_2d, do the following.

double retval_x;
double retval_y;
stack[0].dval = retval_x;
stack[1].dval = retval_y;

Call SPVM Method

If you want to call a method, you get a method id using get_class_method_id or get_instance_method_id.

get_class_method_id get a method id of a class method.

get_instance_method_id get a method id of a instance method.

// Get method id of class method
int32_t method_id = env->get_class_method_id(env, "Foo", "sum", "int(int,int)");

// Get method id of instance method
int32_t method_id = env->get_instance_method_id(env, object, "sum", "int(int,int)");

If method_id is less than 0, it means that the method was not found. It is safe to handle exceptions as follows.

if (method_id < 0) { return env->die(env, "Can't find method id", "Foo/Bar.c", __LINE__); }

Set the SPVM method argument to stack before calling the method.

stack[0].ival = 1;
stack[0].ival = 2;

To call a SPVM method, use the <a href="#native-api-native-sub-api-call_spvm_method">call_spvm_method</a> function.

int32_t exception_flag = env->call_spvm_method(env, method_id, stack);

Nonzero if the method raised an exception, 0 if no exception occurred.

The return value of the method is stored in the first element of the stack.

int32_t total = stack[0].ival;

Native Method Scope

Native method are entirely enclosed in scope.

Objects added to the mortal stack will automatically have their reference count decremented by 1 when the Native Method ends. When the reference count reaches 0, it is released.

Use push_mortal to add objects to the mortal stack.

env->push_mortal(env, object);

Native APIs that normally create an object such as "new_object" will add the automatically created object to the mortal stack so you don't need to use this.

Use "enter_scope" to create a scope. The return value is the ID of that scope.

int32_t scope_id = env->enter_scope (env);

Use "leave_scope" to leave the scope. For the argument, it is necessary to specify the scope ID obtained in "enter_scope".

env->leave_scope(env, scope_id);

Use "remove_mortal" to remove the object from the mortal stack. For the argument, specify the scope ID obtained by "enter_scope" and the object you want to remove. The object is removed from the mortal stack and the reference count is automatically decremented by 1. When the reference count reaches 0, it is released.

env->remove_mortal(env, scope_id, object);

Information about the mortal stack is stored in env.

Exception in Native Method

In the Native Method, it is the return value that indicates whether an exception has occurred.

return 0;

return 1;

If no exception occurs, "0" is returned. This is defined as "0".

If an exception occurs, "1" is returned. It is defined as a value other than "0".

If you want to set the exception message yourself, you can create an exception message with "new_string_nolen" and set it with "set_exception".

env->set_exception(env, env->new_string_nolen(env, "Exception occur");
return 1;

If no exception message is set, a default exception message will be set.

Usually, die is defined to make it easier to use, so it is better to use this.

return env->die("Error. Values must be %d and %d", 3, 5, "Foo/Bar.c", __LINE__);

die can be used in the same way as the C language sprintf function. Be sure to include this file name in the second from the end, and the line number in the last argument. If the message exceeds 255 bytes, the excess is truncated.

The exception is stored in env.

Pointer Type

There is a type called pointer type in SPVM, but I will explain how to use it.

The pointer type definition specifies the pointer_t descriptor in the SPVM class definition. Pointer types cannot have field definitions. This example describes how to use the C standard "struct tm" as a pointer type.

# SPVM/MyTimeInfo.spvm
class MyTimeInfo : pointer_t {

  # Constructor
  native static method new : MyTimeInfo ();

  # Get second
  native method sec : int ();

  # Destructor
  native method DESTROY : ();
}

It defines a new constructor, a method that takes seconds information called sec, and a destructor called DESTROY. These are Native Method.

Next is the definition on the C language side.

# SPVM/MyTimeInfo.c

int32_t SPVM__SPVM__MyTimeInfo__new(SPVM_ENV* env, SPVM_VALUE* stack) {

  // Alloc strcut tm
  void* tm_ptr = env->alloc_memory_block_zero (sizeof (struct tm));

  // Create strcut tm instance
  void* tm_obj = env->new_pointer(env, "MyTimeInfo", tm_ptr);

  stack[0].oval = tm_obj;

  return 0;
}

int32_t SPVM__SPVM__MyTimeInfo__sec(SPVM_ENV* env, SPVM_VALUE* stack) {
  void* tm_obj = stack[0].oval;

  strcut tm* tm_ptr = (struct tm*) env->get_pointer(env, tm_obj);

  stack[0].ival = tm_ptr-> tm_sec;

  return 0;
}

int32_t SPVM__SPVM__MyTimeInfo__DESTROY(SPVM_ENV* env, SPVM_VALUE* stack) {

  void* tm_obj = stack[0].oval;
  strcut tm* tm_ptr = (struct tm*) env->get_pointer(env, tm_obj);

  env->free_memory_block (tm_ptr);

  return 0;
}

In the constructor new, the memory of "struct tm" is first allocated by the alloc_memory_block_zero function. This is a function that reserves one memory block in SPVM. Similar to malloc, this function increments the memory block count by one, making it easier to spot memory leaks.

// Alloc strcut tm
void* tm_ptr = env->alloc_memory_block_zero (sizeof (struct tm));

Next, use the new_pointer function to create a new pointer type object with MyTimeInfo associated with it in the allocated memory.

// Create strcut tm instance
void* tm_obj = env->new_pointer(env, "MyTimeInfo", tm_ptr);

If you return this as a return value, the constructor is complete.

stack[0].ival = tm_ptr-> tm_sec;

return 0;

Next, let's get the value of tm_sec. sec method. The get_pointer function can be used to get a pointer to the memory allocated as a "struct tm" from a pointer type object.

void* tm_obj = stack[0].oval;

strcut tm* tm_ptr = (struct tm*) env->get_pointer(env, tm_obj);

stack[0].ival = tm_ptr-> tm_sec;

The last is the destructor. Be sure to define a destructor, as the allocated memory will not be released automatically.

int32_t SPVM__SPVM__MyTimeInfo__DESTROY(SPVM_ENV* env, SPVM_VALUE* stack) {

  void* tm_obj = stack[0].oval;

  strcut tm* tm_ptr = (struct tm*) env->get_pointer(env, tm_obj);

  env->free_memory_block (tm_ptr);

  return 0;
}

Execute the free_memory_block function to free the memory. Be sure to free the memory allocated by alloc_memory_block_zero with the free_memory_block function. Releases the memory and decrements the memory block count by one.

Call Native API

Native API can be called from "SPVM_ENV* env" passed as an argument. Note that you have to pass env as the first argument.

int32_t basic_type_id = env->get_basic_type_id(env, "Int");

List of Native APIs

class_vars_heap

void* class_vars_heap;

the pointer to the storage area of the class variables. This is used internally.

object_header_byte_size

void* object_header_byte_size;

The byte size of the object's header. This is used internally.

object_weaken_backref_head_offset

void* object_weaken_backref_head_offset;

Offset to a pointer to the back reference of the weak reference in the object structure. This is used internally.

object_ref_count_offset

void* object_ref_count_offset;

Reference count offset in the object structure. This is used internally.

object_basic_type_id_offset

void* object_basic_type_id_offset;

Offset of basic type ID in object structure. This is used internally.

object_type_dimension_offset

void* object_type_dimension_offset;

Offset of type dimension in object structure. This is used internally.

object_type_category_offset

void* object_type_category_offset;

Offset of runtime type category in object structure. This is used internally.

object_flag_offset

void* object_flag_offset;

Offset of flag in object structure. This is used internally.

object_length_offset

void* object_length_offset;

The length offset in the object structure. This is used internally.

byte_object_basic_type_id

void* byte_object_basic_type_id;

Basic type ID of Byte type. This is used internally.

short_object_basic_type_id

void* short_object_basic_type_id;

ID of the base type of Short type. This is used internally.

int_object_basic_type_id

void* int_object_basic_type_id;

ID of the base type of Int type. This is used internally.

long_object_basic_type_id

void* long_object_basic_type_id;

ID of the base type of Long type. This is used internally.

float_object_basic_type_id

void* float_object_basic_type_id;

ID of the base type of Float type. This is used internally.

double_object_basic_type_id

void* double_object_basic_type_id;

ID of the base type of Double type. This is used internally.

compiler

void* compiler;

A pointer to the SPVM compiler. This is used internally.

exception_object

void* exception_object;

Exception object. This is used internally.

native_mortal_stack

void* native_mortal_stack;

Mortal stack used for native calls. This is used internally.

native_mortal_stack_top

void* native_mortal_stack_top;

The top position of the mortal stack used for native calls. This is used internally.

native_mortal_stack_capacity

void* native_mortal_stack_capacity;

The amount of mortal stack used for native calls. This is used internally.

get_basic_type_id

int32_t (*get_basic_type_id)(SPVM_ENV* env, const char* basic_type_name);

Get the ID of the base type given the name of the base type. If it does not exist, a value less than 0 is returned.

Example:

int32_t basic_type_id = env->get_basic_type_id(env, "Int");

get_field_id

int32_t (*get_field_id)(SPVM_ENV* env, const char* class_name, const char* field_name, const char* signature);

Get the ID of the field given the class name, field name, and signature. If the field does not exist, a value less than 0 is returned.

The signature is the same as the field type name.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "int");

get_field_offset

int32_t (*get_field_offset)(SPVM_ENV* env, int32_t field_id);

Gets the offset of the field given the field ID. The field ID must be a valid field ID obtained with the field_id function.

get_class_var_id

int32_t (*get_class_var_id)(SPVM_ENV* env, const char* class_name, const char* class_var_name, const char* signature);

Get the class variable ID given the class name, class variable name and signature. If the class variable does not exist, a value less than 0 is returned.

The signature is the same as the class variable type name.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "int");

get_class_method_id

int32_t (*get_class_method_id)(SPVM_ENV* env, const char* class_name, const char* method_name, const char* signature);

Get a class method ID by the class name, the method name, and the method signature. If the class method does not exists, a negative value is returned.

This ID is used by "call_class_method".

The method signature has the following format.

ReturnValueType(ArgumentType1,ArgumentType2,...)

Example:

int32_t method_id = env->get_class_method_id(env, "Foo", "get", "int(long,string)");

get_instance_method_id

int32_t (*get_instance_method_id)(SPVM_ENV* env, void* object, const char* method_name, const char* signature);

Get a instance method ID by the object, the method name, and the method signatre. If the instance method does not exist, a negative value is returned.

This ID is used by "call_instance_method".

The method signature has the following format,

ReturnValueType(ArgumentType1,ArgumentType2,...)

Example:

int32_t method_id = env->get_instance_method_id(env, object, "get", "int(long,string)");

new_object_raw

void* (*new_object_raw)(SPVM_ENV* env, int32_t basic_type_id);

Create a new object with a basic type ID. The basic type ID must be the correct base type ID return by get_basic_type_id function.

new_object

void* (*new_object)(SPVM_ENV* env, int32_t basic_type_id);

Do the same as new_object_raw, and add the created object to the mortal stack of the environment. Use this function in normal use instead of new_object_raw.

Example:

int32_t basic_type_id = env->get_basic_type_id(env, "Int");
void* object = env->new_object(env, basic_type_id);

new_byte_array_raw

void* (*new_byte_array_raw)(SPVM_ENV* env, int32_t length);

Create a new byte[] type array by specifying the length.

new_byte_array

void* (*new_byte_array)(SPVM_ENV* env, int32_t length);

Do the same as new_byte_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_byte_array_raw.

Example:

void* byte_array = env->new_byte_array(env, 100);

new_short_array_raw

void* (*new_short_array_raw)(SPVM_ENV* env, int32_t length);

Create a new short[] type array by specifying the length.

new_short_array

void* (*new_short_array)(SPVM_ENV* env, int32_t length);

Do the same as new_short_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_short_array_raw.

Example:

void* short_array = env->new_short_array(env, 100);

new_int_array_raw

void* (*new_int_array_raw)(SPVM_ENV* env, int32_t length);

Create a new int[] type array by specifying the length.

new_int_array

void* (*new_int_array)(SPVM_ENV* env, int32_t length);

Do the same as new_int_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_int_array_raw.

Example:

void* int_array = env->new_int_array(env, 100);

new_long_array_raw

void* (*new_long_array_raw)(SPVM_ENV* env, int32_t length);

Create a new long[] type array by specifying the length.

new_long_array

void* (*new_long_array)(SPVM_ENV* env, int32_t length);

Do the same as new_long_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_long_array_raw.

Example:

void* long_array = env->new_long_array(env, 100);

new_float_array_raw

void* (*new_float_array_raw)(SPVM_ENV* env, int32_t length);

Create a new float[] type array by specifying the length.

new_float_array

void* (*new_float_array)(SPVM_ENV* env, int32_t length);

Do the same as new_float_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_float_array_raw.

Example:

void* float_array = env->new_float_array(env, 100);

new_double_array_raw

void* (*new_double_array_raw)(SPVM_ENV* env, int32_t length);

Create a new double[] type array by specifying the length.

new_double_array

void* (*new_double_array)(SPVM_ENV* env, int32_t length);

Do the same as new_double_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_double_array_raw.

Example:

void* double_array = env->new_double_array(env, 100);

new_object_array_raw

void* (*new_object_array_raw)(SPVM_ENV* env, int32_t basic_type_id, int32_t length);

Create a new object type array by specifying the basic type ID and the array length. The basic type ID must be the correct basic type ID got by get_basic_type_id function.

new_object_array

void* (*new_object_array)(SPVM_ENV* env, int32_t basic_type_id, int32_t length);

Do the same as new_object_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_object_array_raw.

Example:

int32_t basic_type_id = env->get_basic_type_id(env, "Int");
void* object_array = env->new_object_array(env, basic_type_id, 100);

new_muldim_array_raw

void* (*new_muldim_array_raw)(SPVM_ENV* env, int32_t basic_type_id, int32_t element_dimension, int32_t length);

Create a new multi dimension array by specifying the basic type ID, the type dimension of the element, and the array length. The basic type ID must be the correct basic type ID got bu get_basic_type_id function. the type dimension of the element must be less than or equals to 255.

new_muldim_array

void* (*new_muldim_array_raw)(SPVM_ENV* env, int32_t basic_type_id, int32_t element_dimension, int32_t length);

Do the same as new_muldim_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_muldim_array_raw.

Example:

// new Int[][][100]
int32_t basic_type_id = env->get_basic_type_id(env, "Int");
void* multi_array = env->new_muldim_array(env, basic_type_id, 2, 100);

new_mulnum_array_raw

void* (*new_mulnum_array_raw)(SPVM_ENV* env, int32_t basic_type_id, int32_t length);

Create a new multi-numeric array by specifying the basic type ID and the array length. The basic type ID must be the correct basic type ID got by basic_type_id function.

new_mulnum_array

void* (*new_mulnum_array)(SPVM_ENV* env, int32_t basic_type_id, int32_t length);

Do the same as new_mulnum_array_raw, and add the created array to the mortal stack of the environment. Use this function in normal use instead of new_mulnum_array_raw.

Example:

int32_t basic_type_id = env->get_basic_type_id(env, "Complex_2d");
void* value_array = env->new_mulnum_array(env, basic_type_id, 100);

new_string_nolen_raw

void* (*new_string_nolen_raw)(SPVM_ENV* env, const char* bytes);

Create a new string object by specifying C language char* type value. this value must end with "\0".

new_string_nolen

void* (*new_string_nolen)(SPVM_ENV* env, const char* bytes);

Do the same as new_string_nolen_raw, and add the created string object to the mortal stack of the environment. Use this function in normal use instead of new_string_nolen_raw.

Example:

void* str_obj = env->new_string_nolen(env, "Hello World");

new_string_raw

void* (*new_string_raw)(SPVM_ENV* env, const char* bytes, int32_t length);

Create a new string object by specifying C language char* type value and the length.

new_string

void* (*new_string)(SPVM_ENV* env, const char* bytes, int32_t length);

Do the same as new_string_raw, and add the created string object to the mortal stack of the environment. Use this function in normal use instead of new_string_raw.

Example:

void* str_obj = env->new_string(env, "Hello \0World", 11);

new_pointer_raw

void* (*new_pointer_raw)(SPVM_ENV* env, int32_t basic_type_id, void* pointer);

Create a pointer type object by specifying a basic type ID and a C language pointer. The basic type ID must be the correct basic type ID got by get_basic_type_id function.

new_pointer

void* (*new_pointer)(SPVM_ENV* env, int32_t basic_type_id, void* pointer);

Do the same as new_pointer_raw, and add the created string object to the mortal stack of the environment. Use this function in normal use instead of new_pointer_raw.

Example:

int32_t basic_type_id = env->get_basic_type_id(env, "MyTime");
void* pointer = malloc(sizeof (struct tm));
void* pointer_obj = env->new_pointer(env, basic_type_id, pointer);

concat_raw

void* (*concat_raw)(SPVM_ENV* env, void* string1, void* string2);

Concat two strings.

concat

void* (*concat)(SPVM_ENV* env, void* string1, void* string2);

Do the same as concat_raw, and add the created string object to the mortal stack of the environment. Use this function in normal use instead of concat_raw.

new_stack_trace_raw

void* (*new_stack_trace_raw)(SPVM_ENV* env, void* exception, const char* class_name, const char* method_name, const char* file, int32_t line);

If you specify a byte[] type exception message and a class name, method name, file name and line number, the character string of the class name, method name, file name and line number is added to the end of the byte[] type exception message. The added character string will be returned.

This function does not add objects to the mortal stack, use new_stack_trace to avoid memory leaks for normal use.

new_stack_trace

void* (*new_stack_trace)(SPVM_ENV* env, void* exception, const char* class_name, const char* method_name, const char* file, int32_t line);

When a byte[] type exception message and a class name, method name, file name and line number are specified, the string of the class name, method name, file name and line number is added to the end of the string type exception message. Returns a new string type object. Add the newly created object to the mortal stack.

length

int32_t (*length)(SPVM_ENV*, void* array);

If you specify an array, the length of the array is returned.

Example:

int32_t length = env->length(env, array);

get_elems_byte

int8_t* (*get_elems_byte)(SPVM_ENV* env, void* array);

If you specify a byte[] type array, the pointer at the beginning of the internally stored C language int8_t[] type array is returned.

Example:

int8_t* values = env->get_elems_byte(env, array);
values[3] = 5;

get_elems_short

int16_t* (*get_elems_short)(SPVM_ENV* env, void* array);

If a short[] type array is specified, the pointer at the beginning of the internally stored C language int16_t[] type array is returned.

Example:

int16_t* values = env->get_elems_short(env, array);
values[3] = 5;

get_elems_int

int32_t* (*get_elems_int)(SPVM_ENV* env, void* array);

When an int[] type array is specified, the pointer at the beginning of the internally stored C language int32_t[] type array is returned.

Example:

int32_t* values = env->get_elems_int(env, array);
values[3] = 5;

get_elems_long

int64_t* (*get_elems_long)(SPVM_ENV* env, void* array);

When a long[] type array is specified, the pointer at the beginning of the internally stored C language int64_t[] type array is returned.

Example:

int64_t* values = env->get_elems_long(env, array);
values[3] = 5;

get_elems_float

float* (*get_elems_float)(SPVM_ENV* env, void* array);

When a float[] type array is specified, the pointer at the beginning of the C language float[] type array internally held is returned.

Example:

float* values = env->get_elems_float(env, array);
values[3] = 1.5f;

get_elems_double

double* (*get_elems_double)(SPVM_ENV* env, void* array);

If a double[] type array is specified, the pointer at the beginning of the internally stored C double[] type array is returned.

Example:

double* values = env->get_elems_double(env, array);
values[3] = 1.5;

get_elem_object

void* (*get_elem_object)(SPVM_ENV* env, void* array, int32_t index);

Gets an object of an element given an array of object types and a methodscript. If the element is a weak reference, the weak reference is removed.

Example:

void* object = env->get_elem_object(env, array, 3);

set_elem_object

void (*set_elem_object)(SPVM_ENV* env, void* array, int32_t index, void* value);

If you specify an array of object type and methodscript and element objects, the element object is assigned to the corresponding methodscript position. If the element's object has a weak reference, the weak reference is removed. The reference count of the originally assigned object is decremented by 1.

Example:

env->get_elem_object(env, array, 3, object);

get_field_byte

int8_t (*get_field_byte)(SPVM_ENV* env, void* object, int32_t field_id);

If an object and field ID are specified, the byte field value will be returned as a C language int8_t type value. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "byte");
int8_t field_value = env->get_field_byte(env, object, field_id);

get_field_short

int16_t (*get_field_short)(SPVM_ENV* env, void* object, int32_t field_id);

If you specify the object and field ID, the value of the short type field will be returned as the int16_t type value of C language. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "short");
int16_t field_value = env->get_field_short(env, object, field_id);

get_field_int

int32_t (*get_field_int)(SPVM_ENV* env, void* object, int32_t field_id);

If an object and a field ID are specified, the value of the int type field will be returned as a C language int32_t type value. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "int");
int32_t field_value = env->get_field_int(env, object, field_id);

get_field_long

int64_t (*get_field_long)(SPVM_ENV* env, void* object, int32_t field_id);

If you specify the object and field ID, the value of the long type field will be returned as the value of int64_t type of C language. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "long");
int64_t field_value = env->get_field_long(env, object, field_id);

get_field_float

float (*get_field_float)(SPVM_ENV* env, void* object, int32_t field_id);

If you specify the object and field ID, the value of the float type field will be returned as a C language float type value. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "float");
float field_value = env->get_field_float(env, object, field_id);

get_field_double

double (*get_field_double)(SPVM_ENV* env, void* object, int32_t field_id);

If you specify the object and field ID, the value of the double type field will be returned as a double type value in C language. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "double");
double field_value = env->get_field_double(env, object, field_id);

get_field_object

void* (*get_field_object)(SPVM_ENV* env, void* object, int32_t field_id);

If you specify the object and field ID, the value of the object type field is returned as a void* type value in C language. The field ID must be a valid field ID obtained with the field_id function. If the field is a weak reference, it will be removed.

int32_t field_id = env->get_field_id(env, "Foo", "x", "Int");
void* field_value = env->get_field_object(env, object, field_id);

set_field_byte

void (*set_field_byte)(SPVM_ENV* env, void* object, int32_t field_id, int8_t value);

If you specify the object and field ID and the value of the field, the value is set to the byte type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "byte");
int8_t field_value = 5;
env->set_field_byte(env, object, field_id, field_value);

set_field_short

void (*set_field_short)(SPVM_ENV* env, void* object, int32_t field_id, int16_t value);

If you specify the object and field ID and the value of the field, the value is set to the short type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "short");
int16_t field_value = 5;
env->set_field_short(env, object, field_id, field_value);

set_field_int

void (*set_field_int)(SPVM_ENV* env, void* object, int32_t field_id, int32_t value);

If you specify the object and field ID and the value of the field, the value is set to the int type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "int");
int32_t field_value = 5;
env->set_field_int(env, object, field_id, field_value);

set_field_long

void (*set_field_long)(SPVM_ENV* env, void* object, int32_t field_id, int64_t value);

If you specify the object and field ID and the value of the field, the value is set to the long type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "long");
int64_t field_value = 5;
env->set_field_long(env, object, field_id, field_value);

set_field_float

void (*set_field_float)(SPVM_ENV* env, void* object, int32_t field_id, float value);

If you specify the object and field ID and the value of the field, the value is set to the float type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "float");
float field_value = 1.5f;
env->set_field_float(env, object, field_id, field_value);

set_field_double

void (*set_field_double)(SPVM_ENV* env, void* object, int32_t field_id, double value);

If you specify the object and field ID and the value of the field, the value is set to the double type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "double");
double field_value = 1.55;
env->set_field_double(env, object, field_id, field_value);

set_field_object

void (*set_field_object)(SPVM_ENV* env, void* object, int32_t field_id, void* value);

Object and field Specify the ID and the value of the field and set the value to the object type field. The field ID must be a valid field ID obtained with the field_id function. After setting, the reference count is incremented by 1. The original value has the reference count decremented by 1.

Example:

int32_t field_id = env->get_field_id(env, "Foo", "x", "Int");
int32_t basic_type_id = env->get_basic_type_id(env, "Int");
void* object = env->new_object(env, basic_type_id);
env->set_field_object(env, object, field_id, object);

get_class_var_byte

int8_t (*get_class_var_byte)(SPVM_ENV* env, int32_t pkgvar_id);

If an object and a class variable ID are specified, the value of the byte type class variable is returned as a C language int8_t type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "byte");
int8_t pkgvar_value = env->get_class_var_byte(env, object, pkgvar_id);

get_class_var_short

int16_t (*get_class_var_short)(SPVM_ENV* env, int32_t pkgvar_id);

If an object and a class variable ID are specified, the value of the short type class variable will be returned as a C language int16_t type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "short");
int16_t pkgvar_value = env->get_class_var_short(env, object, pkgvar_id);

get_class_var_int

int32_t (*get_class_var_int)(SPVM_ENV* env, int32_t pkgvar_id);

If an object and a class variable ID are specified, the value of the int type class variable will be returned as a C language int32_t type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "int");
int32_t pkgvar_value = env->get_class_var_int(env, object, pkgvar_id);

get_class_var_long

int64_t (*get_class_var_long)(SPVM_ENV* env, int32_t pkgvar_id);

If an object and a class variable ID are specified, the value of the long type class variable will be returned as a C language int64_t type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "long");
int64_t pkgvar_value = env->get_class_var_long(env, object, pkgvar_id);

get_class_var_float

float (*get_class_var_float)(SPVM_ENV* env, int32_t pkgvar_id);

If an object and a class variable ID are specified, the value of the float type class variable will be returned as a C language float type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "float");
float pkgvar_value = env->get_class_var_float(env, object, pkgvar_id);

get_class_var_double

double (*get_class_var_double)(SPVM_ENV* env, int32_t pkgvar_id);

If you specify an object and a class variable ID, the value of the double type class variable is returned as a C type double type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "double");
double pkgvar_value = env->get_class_var_double(env, object, pkgvar_id);

get_class_var_object

void* (*get_class_var_object)(SPVM_ENV* env, int32_t pkgvar_id);

When an object and a class variable ID are specified, the value of the object type class variable is returned as a C language void* type value. The class variable ID must be a valid class variable ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "Int");
void* pkgvar_value = env->get_class_var_byte(env, object, pkgvar_id);

set_class_var_byte

void (*set_class_var_byte)(SPVM_ENV* env, int32_t pkgvar_id, int8_t value);

If you specify the object and field ID and the value of the field, the value is set to the byte type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "byte");
int8_t pkgvar_value = 5;
env->set_class_var_byte(env, pkgvar_id, pkgvar_value);

set_class_var_short

void (*set_class_var_short)(SPVM_ENV* env, int32_t pkgvar_id, int16_t value);

If you specify the object and field ID and the value of the field, the value is set to the short type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "short");
int16_t pkgvar_value = 5;
env->set_class_var_short(env, pkgvar_id, pkgvar_value);

set_class_var_int

void (*set_class_var_int)(SPVM_ENV* env, int32_t pkgvar_id, int32_t value);

If you specify the object and field ID and the value of the field, the value is set to the int type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "int");
int32_t pkgvar_value = 5;
env->set_class_var_int(env, pkgvar_id, pkgvar_value);

set_class_var_long

void (*set_class_var_long)(SPVM_ENV* env, int32_t pkgvar_id, int64_t value);

If you specify the object and field ID and the value of the field, the value is set to the long type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "long");
int64_t pkgvar_value = 5;
env->set_class_var_long(env, pkgvar_id, pkgvar_value);

set_class_var_float

void (*set_class_var_float)(SPVM_ENV* env, int32_t pkgvar_id, float value);

If you specify the object and field ID and the value of the field, the value is set to the float type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "float");
float pkgvar_value = 5;
env->set_class_var_float(env, pkgvar_id, pkgvar_value);

set_class_var_double

void (*set_class_var_double)(SPVM_ENV* env, int32_t pkgvar_id, double value);

If you specify the object and field ID and the value of the field, the value is set to the double type field. The field ID must be a valid field ID obtained with the field_id function.

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "double");
double pkgvar_value = 5;
env->set_class_var_double(env, pkgvar_id, pkgvar_value);

set_class_var_object

void (*set_class_var_object)(SPVM_ENV* env, int32_t pkgvar_id, void* value);

Example:

int32_t pkgvar_id = env->get_class_var_id(env, "Foo", "$VAR", "Int");
int32_t basic_type_id = env->get_basic_type_id(env, "Int");
void* object = env->new_object(env, basic_type_id);
env->set_class_var_object(env, pkgvar_id, pkgvar_value);

get_pointer

void* (*get_pointer)(SPVM_ENV* env, void* pointer_object);

Specify a pointer type object and return the C language pointer stored inside the object.

Example:

strcut tm* tm_ptr = (struct tm*) env->get_pointer(env, tm_obj);

set_pointer

void (*set_pointer)(SPVM_ENV* env, void* pointer_object, void* pointer);

If you specify a pointer type object and a C language pointer, the C language pointer is saved in the internal data of the pointer type object.

call_spvm_method

int32_t (*call_spvm_method)(SPVM_ENV* env, int32_t method_id, SPVM_VALUE* args);

Call a method by specifying the method ID and argument. If an exception occurs in the method, The return value is 1. If not, return 0.

The return value of the method is set to args[0].

get_exception

void* (*get_exception)(SPVM_ENV* env);

Get a exception message which type is byte[].

set_exception

void (*set_exception)(SPVM_ENV* env, void* exception);

Set a exception message which type is byte[].

get_ref_count

int32_t (*get_ref_count)(SPVM_ENV* env, void* object);

Get the refernce count of the object.

inc_ref_count

void (*inc_ref_count)(SPVM_ENV* env, void* object);

Specifying an object increments the reference count of the object.

Use this method only if you have a specific reason to use it. Normally, the reference count is managed automatically.

dec_ref_count

void (*dec_ref_count)(SPVM_ENV* env, void* object);

Specifying an object decrements the object's reference count by 1. When the reference count reaches 0, the object is released.

Use this method only if you have a specific reason to use it. Normally, the reference count is managed automatically.

enter_scope

int32_t (*enter_scope)(SPVM_ENV* env);

Create a new scope and return the scope ID.

push_mortal

int32_t (*push_mortal)(SPVM_ENV* env, void* object);

Add an object to the mortal stack.

If this method succeed, return 0.

If this method don't alloc memory for new mortal information, return 1.

leave_scope

void (*leave_scope)(SPVM_ENV* env, int32_t scope_id);

Specify a scope ID to exit that scope and decrement the object's reference count stored in the mortal stack. Objects with a reference count of 0 are released. The scope ID must be the ID obtained by the enter_scope function.

remove_mortal

int32_t (*remove_mortal)(SPVM_ENV* env, int32_t scope_id, void* remove_object);

Given a scope ID and an object, delete the specified object from the mortal stack.

is_type

int32_t (*is_type)(SPVM_ENV* env, void* object, int32_t basic_type_id, int32_t type_dimension);

Given an object and a base type ID and a type dimension, returns a nonzero value if the object matches both the base type ID and the type dimension, and 0 otherwise.

has_callback

int32_t (*has_callback)(SPVM_ENV* env, void* object, int32_t callback_basic_type_id);

Given a base type id for the object and the callback type, returns a non-zero value if the object conforms to the callback type, and zero otherwise.

get_object_basic_type_id

int32_t (*get_object_basic_type_id)(SPVM_ENV* env, void* object);

Gets the base type ID of the object.

get_object_type_dimension

int32_t (*get_object_type_dimension)(SPVM_ENV* env, void* object);

Gets the dimension of the type of object.

weaken

int32_t (*weaken)(SPVM_ENV* env, void** object_address);

Create weak reference to the object which is specified by object address.

The reference count of the object is decrimented by 1 and weaken flag is added to the object address.

If the reference count is 1, "dec_ref_count" is called to the object.

If object_address is NULL, this method do nothing.

If the object is already weaken, this method do nothing.

This method allocate memory internally to add the back reference from the object to the object address.

This method success return 0.

If failing memory allocation of back reference, return 1.

isweak

int32_t (*isweak()SPVM_ENV* env, void** object);

Given the address of an object, returns non-zero if the object is a weak reference, 0 otherwise.

unweaken

void (*unweaken)(SPVM_ENV* env, void** object_address);

Specifying the address of the object releases the weak reference to the object.

alloc_memory_block_zero

void* (*alloc_memory_block_zero)(SPVM_ENV* env, int64_t byte_size);

If you specify the size in bytes, the memory block is allocated and the pointer of the allocated memory block is returned. If fail to alloc memory, return NULL. If success, all bits in the memory block are initialized with 0 and the memory block count (memory_blocks_count)is incremented by 1.

free_memory_block

void (*free_memory_block)(SPVM_ENV* env, void* block);

If block is not NULL, free the memory and memory blocks count(memory_blocks_count) is decremented by 1.

get_memory_blocks_count

int32_t (*get_memory_blocks_count)(SPVM_ENV* env);

Returns the current number of memory blocks.

The memory block is increased by 1 when an object is created, when the alloc_memory_block_zero function is called, and when a back reference is added by the weaken function.

get_type_name_raw

void* (*get_type_name_raw)(SPVM_ENV* env, void* object);

If you specify an object, a new byte[] type object that stores the type name is returned.

This function does not add objects to the mortal stack, so use type_name for normal use to avoid memory leaks.

get_type_name

void* (*get_type_name)(SPVM_ENV* env, void* object);

If you specify an object, a new byte[] type object that stores the type name is returned. Add the newly created object to the mortal stack.

new_env

SPVM_ENV* (*new_env)(SPVM_ENV* env);

Create a new execution environment based on the current execution environment.

Create a new SPVM runtime environment.

The exception object and mortal stack information will be initialized.

Share the class variables with the original execution environment.

The number of memory blocks is shared with the original execution environment.

If thie method can't allocate memory for SPVM runtime environment, return NULL.

free_env

void (*free_env)(SPVM_ENV* env);

Release the execution environment.

memory_blocks_count

void* memory_blocks_count;

Memory blocks count. This is used internally.

get_chars

const char* (*get_chars)(SPVM_ENV* env, void* string_object);

Get characters pointer in the string object.

Example:

const char* bytes = env->get_chars(env, string_object);

die

int32_t (*die)(SPVM_ENV* env, const char* message, ...);

Create a sprintf formatted message with file name and line number and set it to the exception.

Last two arguments are file name and line number.

Return value is always 1;

Example:

return env->die(env, "Value must be %d", 3, __FILE__, __LINE__);

new_object_by_name

void* (*new_object_by_name)(SPVM_ENV* env, const char* class_name, int32_t* exception_flag, const char* file, int32_t line);

This is same as new_object function, but you can specify class name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
void* minimal = env->new_object_by_name(env, "TestCase::Minimal", &e, __FILE__, __LINE__);
if (e) { return e; }

new_pointer_by_name

void* (*new_pointer_by_name)(SPVM_ENV* env, const char* class_name, void* pointer, int32_t* exception_flag, const char* file, int32_t line);

This is same as new_pointer function, but you can specify class name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

int32_t e;
void* minimal = env->new_pointer_by_name(env, "TestCase::Pointer", pointer, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_byte_by_name

void (*set_field_byte_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, int8_t value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_byte function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_byte_by_name(env, object, "TestCase::Simple", "byte_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_short_by_name

void (*set_field_short_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, int16_t value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_short function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_short_by_name(env, object, "TestCase::Simple", "short_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_int_by_name

void (*set_field_int_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, int32_t value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_int function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_int_by_name(env, object, "TestCase::Simple", "int_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_long_by_name

void (*set_field_long_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, int64_t value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_long function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_long_by_name(env, object, "TestCase::Simple", "long_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_float_by_name

void (*set_field_float_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, float value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_float function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_float_by_name(env, object, "TestCase::Simple", "float_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_double_by_name

void (*set_field_double_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, double value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_double function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_double_by_name(env, object, "TestCase::Simple", "double_value", 13, &e, __FILE__, __LINE__);
if (e) { return e; }

set_field_object_by_name

void (*set_field_object_by_name)(SPVM_ENV* env, void* object,
  const char* class_name, const char* field_name, const char* signature, void* value,
  int32_t* exception_flag, const char* file, int32_t line);

This is same as set_field_object function, but you can specify class name and field name directry.

If function is succeeded, exception_flag is set to 0. If a exception occurs, exception_flag is set to 1.

Example:

int32_t e;
env->set_field_object_by_name(env, object_simple, "TestCase::Simple", "object_value", "TestCase::Minimal", object_minimal, &e, __FILE__, __LINE__);
if (e) { return e; }