/ 
Bio-ToolBox-1.22
River stage zero No dependents
/ manipulate_datasets.pl

NAME

manipulate_datasets.pl

A progam to manipulate tab-delimited data files.

SYNOPSIS

manipulate_datasets.pl [--options ...] <input_filename>

Options:
--in <input_filename>
--func [ reorder | delete | rename | new | number | concatenate | split | 
         sort | gsort | null | duplicate | above | below | specific | keep
         coordinate | cnull | absolute | minimum | maximum | log | delog | 
         format | pr | add | subtract | multiply | divide | combine | scale | 
         zscore | ratio | diff | normdiff | center | rewrite | export | 
         treeview | summary | stat ]
--index <integers>
--exp | --num <integer>
--con | --den <integer>
--target <text> or <number>
--place [r | n]
--(no)zero
--dir [i | d]
--name <text>
--out <filename>
--log
--gz
--version
--help
--doc

OPTIONS

The command line flags and descriptions:

--in <input_filename>

Provide the name of an input file. The file must be a tab-delimited text file, with each row specifiying a genomic feature (gene) or region, and each column representing identifying information or a dataset value. The first row should include the name for each column, e.g. the name of the database dataset from which the values were collected.

If the file was generated using a BioToolBox script, then each column may have metadata stored in a header comment line at the beginning of the file. Manipulations on the data in a column dataset will be added to this metadata and recorded upon file write.

The input file may be compressed using the gzip program and recognized with the extension '.gz'.

--func <function>

The program is designed to be run interactively. However, single manipulations may be performed on single datasets by specifying a function name and any other required options. These functions include the following.

reorder delete rename new number concatenate split coordinate sort gsort null duplicate above below specific keep cnull absolute minimum maximum log delog format pr add subtract multiply divide combine scale zscore ratio diff normdiff center rewrite export treeview summary stat

Refer to the FUNCTIONS section for details.

--index <integers>

Provide the 0-based index number of the column(s) on which to perform the function(s). Multiple indices may also be specified using a comma delimited list without spaces. Ranges of contiguous indices may be specified using a dash between the start and stop. For example, '1,2,5-7,9' would indicate datasets '1, 2, 5, 6, 7, and 9'.

--exp <integer>
--num <integer>

Specify the 0-based index number to be used for the experiment or numerator column with the 'ratio' or 'difference' functions. Both flags are aliases for the same thing.

--con <integer>
--den <integer>

Specify the 0-based index number to be used for the control or denominator column with the 'ratio' or 'difference' functions. Both flags are aliases for the same thing.

--target <string> or <number>

Specify the target value when using various functions. This is a catch-all option for a number of functions. Please refer to the function description for more information.

--place [r | n]

Specify the placement of a transformed column. Two values are accepted ('r' or 'n'):

- (r)eplace the original column with new values
- add as a (n)ew column

Defaults to new placement when executed automatically using the --func option, or prompts the user when executed interactively.

--(no)zero

Specify that zero values should or should not be included when calculating statistics or converting null values on a column. The default is undefined, meaning the program may ask the user interactively whether to include zero values or not.

--dir [i | d]

Specify the direction of a sort:

- (i)ncreasing
- (d)ecreasing
--name <string>

Specify a new column name when re-naming a column using the rename function from the command line. Also, when generating a new column using a defined function (--func <function>) from the command line, the new column will use this name.

--out <filename>

Optionally provide an alternative output file name. If no name is provided, then the input file will be overwritten with a new file. Appropriate extensions will be appended as necessary.

--log

Indicate whether the data is (not) in log2 space. This is required to ensure accurate mathematical calculations in some manipulations. This is not necessary when the log status is appropriately recorded in the dataset metadata.

--gz

Indicate whether the output file should (not) be compressed. The appropriate extension will be added. If this option is not specified, then the compression status of the input file will be preserved.

--version

Print the version number.

--help

Display the POD documentation using perldoc.

DESCRIPTION

This program allows some common mathematical and other manipulations on one or more columns in a datafile. The program is designed as a simple replacement for common manipulations performed in a full featured spreadsheet program, e.g. Excel, particularly with datasets too large to be loaded, all in a conveniant command line program. The program is designed to be operated primarily as an interactive program, allowing for multiple manipulations to be performed. Alternatively, single manipulations may be performed as specified using command line options. As such, the program can be called in shell scripts.

Note that the datafile is loaded entirely in memory. For extremely large datafiles, e.g. binned genomic data, it may be best to first split the file into chunks (use split_data_file.pl), perform the manipulations, and recombine the file (use join_data_file.pl). This could be done through a simple shell script.

The program keeps track of the number of manipulations performed, and if any are performed, will write out to file the changed data. Unless an output file name is provided, it will overwrite the input file (NO backup is made!).

FUNCTIONS

This is a list of the functions available for manipulating columns. These may be selected interactively from the main menu (note the case sensitivity!), or specified on the command line using the --func option.

stat (menu option t)

Print some basic statistics for a column, including mean, median, standard deviation, min, and max. If 0 values are present, indicate whether to include them (y or n)

reorder (menu option R)

The column may be rewritten in a different order. The new order is requested as a string of index numbers in the desired order. Also, a column may be deleted by skipping its number or duplicated by including it twice.

delete (menu option D)

One or more column may be selected for deletion.

rename (menu option n)

Assign a new name to a column. For automatic execution, use the --name option to specify the new name. Also, for any automatically executed function (using the --func option) that generates a new column, the column's new name may be explicitly defined with this option.

number (menu option b)

Assign a number to each datapoint (or line), incrementing from 1 to the end. The numbered column will be inserted after the requested column index.

concatenate (menu option C)

Concatenate the values from two or more columns into a single new column. The character used to join the values may be specified interactively or by the command line option --target (default is '_' in automatic execution mode). The new column is appended at the end.

split (menu option T)

Split a column into two or more new columns using a specified character as the delimiter. The character may be specified interactively or with the --target command line option (default is '_' in automatic execution mode). The new columns are appended at the end. If the number of split items are not equal amongst the rows, absent values are appended with null values.

coordinate (menu option O)

Generate a coordinate string from the chromosome, start, and, if present, stop coordinate values as a new column. The string will have the format "chr:start-stop" or "chr:start". This is useful in making unique identifiers or working with genome browsers.

sort (menu option o)

The entire data table is sorted by a specific column. The first datapoint is checked for the presence of letters, and the data table is then sorted either asciibetically or numerically. If the sort method cannot be automatically determined, it will ask. The direction of sort, (i)ncreasing or (d)ecreasing, is requested.

gsort (menu option g)

The entire data table is sorted by increasing genomic position, first by chromosome then by start position. These columns must exist and have recognizable names (e.g. 'chromo', 'chromosome', 'start').

null (menu option N)

Delete rows that contain a null value in one or more columns. Some of the other functions may not work properly if a non-value is present. If 0 values are present, indicate whether to toss them (y or n). This may also be specified as a command line option using the --except flag.

duplicate (menu option P)

Delete rows with duplicate values. One or more columns may be selected to search for duplicate values. Values are simply concatenated when multiple columns are selected. Rows with duplicated values are deleted, always leaving the first row.

above (menu option A)

Delete rows with values that are above a certain threshold value. One or more columns may be selected to test values for the threshold. The threshold value may be requested interactively or specified with the --target option.

below (menu option B)

Delete rows with values that are below a certain threshold value. One or more columns may be selected to test values for the threshold. The threshold value may be requested interactively or specified with the --target option.

specific (menu option S)

Delete rows with values that contain a specific value, either text or number. One or more columns may be selected to check for values. The specific values may be selected interactively from a list or specified with the --target option.

keep (menu option K)

Keep only those rows with values that contain a specific value, either text or number. One or more columns may be selected to check for values. The specific values may be selected interactively from a list or specified with the --target option.

cnull (menu option U)

Convert null values to a specific value. One or more columns may be selected to convert null values. The new value may be requested interactively or defined with the --target option.

absolute (menu option G)

Convert signed values to their absolute value equivalents. One or more columns may be selected to convert.

minimum (menu option I)

Reset datapoints whose values are less than a specified minimum value to the minimum value. One or more columns may be selected to reset values to the minimum. The minimum value may be requested interactively or specified with the --target option.

maximum (menu option X)

Reset datapoints whose values are greater than a specified maximum value to the maximum value. One or more columns may be selected to reset values to the maximum. The maximum value may be requested interactively or specified with the --target option.

add (menu option a)

Add a value to a column. A real number may be supplied, or the words 'mean', 'median', or 'sum' may be entered as a proxy for those statistical values of the column. The column may either be replaced or added as a new one. For automatic execution, specify the number using the --target option.

subtract (menu option u)

Subtract a value from a column. A real number may be supplied, or the words 'mean', 'median', or 'sum' may be entered as a proxy for those statistical values of the column. The column may either be replaced or added as a new one. For automatic execution, specify the number using the --target option.

multiply (menu option y)

Multiply a column by a value. A real number may be supplied, or the words 'mean', 'median', or 'sum' may be entered as a proxy for those statistical values of the column. The column may either be replaced or added as a new one. For automatic execution, specify the number using the --target option.

divide (menu option v)

Divide a column by a value. A real number may be supplied, or the words 'mean', 'median', or 'sum' may be entered as a proxy for those statistical values of the column. The column may either be replaced or added as a new one. For automatic execution, specify the number using the --target option.

scale (menu option s)

A column may be a median scaled as a means of normalization with other columns. The current median of the column requested is presented, and a new median target is requested. The column may either be replaced with the median scaled values or added as a new column. For automatic execution, specify the new median target with the --target option.

pr (menu option p)

A column may be converted to a percentile rank, whereby the data values are sorted in ascending order and assigned a new value from 0..1 based on its rank in the sorted order. The column may either be replaced with the percentile rank or added as a new column. The original order of the column is maintained.

zscore (menu option Z)

Generate a Z-score or standard score for each value in a column. The Z-score is the number of standard deviations the value is away from the column's mean, such that the new mean is 0 and the standard deviation is 1. Provides a simple method of normalizing columns with disparate dynamic ranges.

log (menu option l)

A column may be converted to log values. The column may either be replaced with the log values or added as a new column. Use the --target option to specify the base (usually 2 or 10).

delog (menu option L)

A column that is currently in log space may be converted back to normal numbers. The column may either be replaced with the new values or added as a new column. Use the --target option to specify the base (usually 2 or 10). The base may be obtained from the metadata.

format (menu option f)

Format the numbers of a column to a given number of decimal places. An integer must be provided. The column may either be replaced or added as a new column. For automatic execution, use the --target option to specify the number decimal places.

combine (menu option c)

Mathematically combine the data values in two or more columns. The methods for combining the values include mean, median, min, max, stdev, or sum. The method may be specified on the command line using the --target option. The combined data values are added as a new column.

ratio (menu option r)

A ratio may be generated between two columns. The experiment and control columns are requested and the ratio is added as a new column. For log2 numbers, the control is subtracted from the experiment. The log2 status is checked in the metadata for the specified columns, or may be specified as a command line option, or asked of the user.

diff (menu option d)

A simple difference is generated between two existing columns. The values in the 'control' column are simply subtracted from the values in the 'experimental' column and recorded as a new column. For enumerated columns (e.g. tag counts from Next Generation Sequencing), the columns should be subsampled to equalize the sums of the two columns. The indices for the experimental and control columns may either requested from the user or supplied by the --exp and --con command line options.

normdiff (menu option z)

A normalized difference is generated between two existing columns. The difference between 'control' and 'experimental' column values is divided by the square root of the sum (an approximation of the standard deviation). This is supposed to yield fewer false positives than a simple difference (see Nix et al, BMC Bioinformatics, 2008). For enumerated datasets (e.g. tag counts from Next Generation Sequencing), the datasets should be subsampled to equalize the sums of the two datasets. The indices for the experimental and control columns may either requested from the user or supplied by the --exp and --con command line options.

center (menu option e)

Center normalize the datapoints in a row by subtracting the mean or median of the datapoints. The range of columns is requested or provided by the --index option. Old values are replaced by new values. This is useful for visualizing data as a heat map, for example.

new (menu option w)

Generate a new column which contains an identical value for each datapoint (row). The value may be either requested interactively or supplied using the --target option. This function may be useful for assigning a common value to all of the data points before joining the data file with another.

summary (menu option y)

Write out a summary of collected windowed data file, in which the mean for each of the data columns is calculated, transposed (columns become rows), and written to a new data file. This is essentially identical to the summary function from the biotoolbox analysis scripts map_relative_data.pl and pull_features.pl. It assumes that each column has start and stop metadata. The program will automatically identify available columns to summarize based on their name. In interactive mode, it will request the contiguous range of start and ending columns to summarize. The contiguous columns may also be indicated using the --index option. By default, a new file using the input file base name appended with '_summary' is written, or a filename may be specified using the --out option.

export (menu option x)

Export the data into a simple tab-delimited text file that contains no metadata or header information. Non-values '.' are converted to true nulls. If an output file name is specified using the --outfile option, it will be used. Otherwise, a possible filename will be suggested based on the input file name. If any modifications are made to the data structure, a normal data file will still be written. Note that this could overwrite the exported file if the output file name was specified on the command line, as both file write subroutines will use the same name!

treeview (menu option i)

Export the data to the CDT format compatible with both Treeview and Cluster programs for visualizing and/or generating clusters. Specify the columns containing a unique name and the columns to be analyzed (e.g. --index <name>,<start-stop>). Extraneous columns are removed. Additional manipulations on the columns may be performed prior to exporting. These may be chosen interactively or using the codes listed below and specified using the --target option.

su - decreasing sort by sum of row values
sm - decreasing sort by mean of row values
cg - median center features (rows)
cd - median center datasets (columns)
zd - convert columns to Z-scores
pd - convert columns to percentile ranks
L2 - convert values to log2
n0 - convert nulls to 0.0

A simple Cluster data text file is written (default file name "<basename>.cdt"), but without the GWEIGHT column or EWEIGHT row. The original file will not be rewritten.

rewrite (menu option W)

Force the data file contents to be re-written. Useful if you want to write an intermediate file during numerous interactive manipulations. Consider this as a 'Save as...'.

AUTHOR

Timothy J. Parnell, PhD
Howard Hughes Medical Institute
Dept of Oncological Sciences
Huntsman Cancer Institute
University of Utah
Salt Lake City, UT, 84112

This package is free software; you can redistribute it and/or modify it under the terms of the GPL (either version 1, or at your option, any later version) or the Artistic License 2.0.