Revision history for Perl module Module::Release
2.123_01 2017-04-18T09:24:25Z
* Fix the relative path requires. v5.26 will remove the . from
@INC.
2.123 2016-12-05T18:39:56Z
* Catch up with latest Test::More and perl behavior
2.122_01 2016-11-16T01:15:00Z
* Try harder to find out what's going on with Dan Collins's
testers setup.
2.122 2016-03-04T23:38:14Z
* RT #112252 - fix for changes in version.pm
* RT #44492 - add ignore_prereqs config option
* RT #44529 - fix some tests on Windows
* RT #78442 - add explicit pod encoding
* RT #72845 - parse three part version
2.121_02 2016-02-26T13:33:24Z
* Don't support underscores in v-strings. version 0.991201
changed this behavior according to the Lyon Compromise:
https://gist.github.com/dagolden/9559280
RT # 112252
2.12 2016-01-26T19:00:52Z
* Freshen distro and fix a few things under the hood.
2.11_01 2015-04-06T14:06:35Z
* Add the CA cert with the right Mojo::UserAgent method
2.11 - 2014-09-18
* Update the data to 20140910.
2.11 - 2014-09-14
* Add RELEASE_OPTS
* various small fixups
2.09 - 2014-08-26
* Release the Andriod fix
2.08 - 2014-01-06
* Add a vcs_exit() at the end so a repository can do
post-release tasks (such as a `git push`)
2.07_01 - 2014-01-04
* Update Mojo::UserAgent for transactor changes in 4.50
2.07 - 2013-12-17
* Bump to a release version
2.06_06 - 2013-12-14
* Update for Mojo 4 (not that big of a change :)
2.06_05 - 2013-12-12
* Don't try so hard to check perl on Windows
2.06_04 - 2013-02-10
* PAUSE turned off FTP, so I switch to using a Mojo web uploader
2.06_02 - 2012-07-18
* Add =encoding to Pod sections to avoid new Pod::Simple warnings
2.06_01 - 2011-12-19
* Quash some warnings while loading mixins
2.06 - 2011-12-19
* Bumping to a stable release
2.05_07 - 2011-11-30
* Handle point versions RT #72845 (WULEE)
2.05_06 - 2011-07-24
* Handle the latest in LWP, using LWP::Protocol::https and
the new CACertOrg::CA to supply the cert for PAUSE.
* Add a -C command-line option to skip updating the Changes
file, it the case of a failed upload.
2.05_05 - 2011-07-16
* Handle Module::Build
* Some Windows stuff is still broken
2.05_04 - 2011-04-18
* Add LWP::UserAgent prereq: now not in the same distro
as HTTP::*!
2.05_02 - 2011-04-16
* Two features from H.Merijn Brand: if a test fails under
debugging, try harder with prove
* Add the allow_glob_in_perls to specify a pattern for paths
for the perls option.
2.05_01 - 2009-09-22
* Let's start checking MANIFEST to ensure we didn't forget
anything. This might be annoying the first time since
make manifest might re-order your file and you have to
recommit it.
2.05 - 2009-06-15
* Fixes to SVN status pattern matching
* Set build file names in config, if you like
2.04_03 - 2009-06-10
* RT 46696: Fix parsing of SVN output, handle makefile config
directives as documented.
2.04_01 - 2009-03-24
* Add experimental ignore_prereqs option to pass on to Test::Prereqs
2.04 - 2009-03-24
* Use a platform-specific version of devnull
2.03 - 2009-03-22
* Treat Test::Prereq and Module::CPANTS::Analysse as
optional dependencies. They were before, but now you get
a nicer error message.
2.02 - 2009-02-07
* Fix the command runner for the SVN.pm. SVN.pm is otherwise
neglected since I've stopped using SVN but I will accept
patches.
* The run.t patch undefs PATH before it looks for commands
2.01 - 2008-11-25
A bump to a release version
2.00_07 - 2008-11-06
* Changes the methods with "cvs" in the name to be "vcs" instead.
The old names came from the time I used CVS, but no one does
that anymore. "vcs" is for Version Control System.
2.00_06 - 2008-11-05
* Fix up a test to work even if the system error message isn't
english.
2.00_05 - 2008-11-04
* Added the -a switch to turn on $ENV{AUTOMATED_TESTING}
* Added the -p switch to turn off prereq tests
* Added automated_testing to possible config directives
* The kwalitee directive is now skip_kwalitee
* There's a skip_prereqs directive
2.00_03 - 2008-08-15
* Distro cleanup, no big whoop
2.00_02 - 2008-08-09
* The beginning of the new Module::Release. Lots of stuff
moved into separate modules to act as mixins. There is a
lot more testing.
* This is still a developer release, so don't get too
attached to anything just yet.
1.22 - 2008-04-06
* BUG FIX: Move kwalitee testing after normal testing, and have
the kwalitee tests make their own dist to ensure that they
have it.
1.21 - 2008-04-05
* NEW FEATURE: Now test with multiple perls!
1.20 - 2007-11-20
* fix dist_version to handle dev versions. Previously it was
ignoring the _\d+, so the version that showed up in changes
didn't have the _\d+.
1.19 - 2007-11-11
* Sagar Shah noticed I tried to call _die() before I used bless().
Oops. Fixed.
* If you have older versions before I started using _die(), you don't
need to rush to get this version. If you got the latest to use
Module::Release::Git, you need to upgrade.
1.18 - 2007-10-27
* distro cleanups after moving from CVS to SVN
* Changes from Torsten Schoenfeld to make get_readme and get_changes
subclassable (that is, call them as methods like everything else)
* Require Perl 5.006. I haven't done anything intentional to not
use Perl 5.005, but I don't want to support that. With CPAN Testers
going back farther in time now, I have to draw the line somewhere
just to manage my time well. :)
1.17_01 - 2007-10-03
* The output and debugging filehandles come from methods now.
This makes it easier to move the output around, or even turn
it off. I wanted this for Module::Release::Git. The interface
has some new features, but should be compatible with the older
stuff.
* Added some git support to release(1). This should refactor
itself out in various ways, but I just need the support right
now without going through all the work to make it nice nice.
1.17 - 2007-08-13
* distro cleanups - no need to upgrade
1.16 - 2007-05-03
* Fix for test suite problem
1.14 - 2007-03-16
* use a temp file for cookies
* don't test script if M::R::Subversion isn't installed
1.13 - 2007-02-22
* Updated the distro for PAUSE indexing problems (my fault)
* release(1) now detects SVN and loads Module::Release::Subversion
to handle it (that's a separate distro, though).
* release(1) now uses Module::CPANTS::Analyze's cpants_lint.pl
to check kwalitee. That's also a separate distro.
1.12 - 2006-09-25
* Changes from Ken Williams
* New 'makefile_PL' and 'makefile' parameters to the new()
method allow Module::Build-based distributions to work more
smoothly - set them to 'Build.PL' and 'Build', respectively.
* The 'release_subclass' parameter to new() is un-deprecated
again.
* Subclasses previously could not override the new() method
when invoked via the 'release_subclass' mechanism, now they can.
* When running under a passive FTP mode, we were telling the
server to go into passive mode twice, which causes some
servers to bomb out. This is fixed.
* The error message when an FTP PUT operation failed has been
improved.
* System calls made during the release process will now read
their underlying STDOUT and STDERR using read(), which helps
you see what's going on when there are interactive steps.
* The getpass() method will now check for CPAN_PASS and
SF_PASS values previously set as member variables. This
helps users who might want to, for example, look their
values up in the OS X keychain using a custom subclass.
* Fixed a couple of minor POD formatting errors.
1.10 - 2006-06-08
* Distro cleanup (removed sf_login.t test), fixed doc bug about
PAUSE, cleansed POD. No need to upgrade.
1.08 - 2006-05-20
* Added MANIFEST checking feature. If `make manifest` has to change
MANIFEST, check_manifest() dies. You'll have to check in MANIFEST
before you can go on anyway, so you might as well stop and take a
look at it (and maybe update MANIFEST.SKIP too). I needed this
because although I had a lot of pod_coverage tests lying about,
they never made it into the dists because I never added them to
MANIFEST. Stoopid me.
* This updates the release(1) script too. Make sure you want this
feature before you overwrite your old release(1).
1.07 - 2006-05-17
* Minor updates to the distro - no code changes. No need to upgrade
0.25 - 2004-12-17
* No changes to functionality.
* Released only because I (Andy) deleted the latest version,
because I thought brian had newer ones, when he didn't.
This meant that the indexer got all confused. I hope this
stops people from now wondering "Where did Module::Release go?"
* Modernized t/pod.t
* Made tests in t/load.t more inclusive
* Updated the Makefile.PL
0.24 - 2003-11-29
* fixed a problem in Module::Release's check_cvs routine where
it was not checking each line of output
0.23 - 2003-06-22
* All output now goes to the screen if --debug is on. Thanks to
Ken Williams. "High school students."
0.23 - 1899-12-31
* release will show the user all STDOUT of the subprocesses
whenever debug is on. This will prevent the machine from waiting
for a response from you because you don't know it's there.
0.22 - 2003-04-09
* release will not run if there are any switch errors
* Added many error checks in ftp_upload.
* Added some docs on how to find sf_group_id and sf_release_id.
* Removed a "last CVS" in cvs() method. It would have
blown up if someone didn't have a CVS directory.
* Renamed perl() method to build_makefile()
* Renamed cvs() to check_cvs()
* Added basic POD docs for the functions
0.21 - 2003-03-29
Many more patches, thanks to Ken Williams. I fear it won't be
long until Module::Release is sending & receiving mail.
* release only checks for passwords if they're necessary.
This means you don't have to have a password if you're running
"release -t" to test.
* A more complete dependency list in Makefile.PL
* A new 'release_subclass' config file entry lets you subclass
Module::Release. There's an example in the docs.
* After FTP upload, we check to see whether the two versions of
the file have the same size. This should catch my FTP-ing bug.
* The cvs_tag() method now calls make_cvs_tag() to make the
tag string. This lets me override make_cvs_tag() in a subclass.
0.20 - 2003-03-26
* Moved all the real work into Module::Release. Thanks to
Ken Williams for doing all the dirty work on this.
* Fixed the Test::Pod dependency
0.16 - 2003-03-19
* No new features
* Removed the dependency on Test::Pod
0.15 - 2003-03-14
* Support for the PERL environment variable.
* Cleaned up tabs 'n' spaces in the source. Shouldn't
affect anything in how you use the program.
0.14 - 2003-03-12
* 0.13 is an incorrect distro. This is what you want.
0.13 - 2003-03-12
Most of these changes are from Max Maischein. Cross-platform
compatibility should be a lot better. Thanks, Max!
* Prompts for passwords that are not set in the environment.
* Fixed a bug in checking for required fields
* Uses "$Config{make}" instead of "make".
* Moved all backticks into a subroutine "run", that also echoes
the command if "-d" is set.
* Added a check whether the file-to-distribute actually exists,
before making the ftp connection.
* The regex to guess the distname from the tardist output
needed some whitespace added to work with Win32.
* Added support for passive FTP.
0.12 - 2003-03-06
Most of the changes in this revision are from Chris Nandor:
* Add basic help page
* Add more debugging information (dump `` output)
* Add command-line switches for help, debug, and test (exits after
testing phase)
* Allow not using either the CPAN or SourceForge.net (but not both)
* Check cvs exit status
* Do not update CVS automatically; release will exit if it sees a U
anyway, so might as well just let the developer handle it
* Allow modification of "release name" via regex in .releaserc
* Update docs
* General cleanup
0.11 - 2003-03-03
* Patches to make this less brian-specific. Thanks to Chris
Nandor for taking it upon himself to do so.
* Removed a lot of dependencies on external modules.
0.10 - 2002-12-11
* prompt for comments to put in Changes, commit Changes, and
use comments in SourceForge change log notes
* guess the release file name from 'make dist' so the first
argument is now optional
* put the right date in the SourceForge release date