Changes for 0.9110 Thu Sep 1 13:43:06 2011
================================================
* CPANPLUS::Dist::MM now ensures that Makefile.PL
is older than any generated Makefile
* When resolving dependencies ignore any @INC-hook
when finding installed modules
* Updated the META.yml in the dist to specify
'dynamic_config' as true.
Changes for 0.9109 Tue Jul 19 22:44:53 2011
================================================
* Fix support for v-strings and x.y.z versions with v5.8.4
Changes for 0.9108 Fri Jul 15 15:15:06 2011
================================================
* Always use INSTALLER_MM for Module-Build
Changes for 0.9107 Tue Jul 12 15:22:14 2011
================================================
* Add support for v-strings and x.y.z versions, using the version module.
* Resolve [rt.cpan.org #69420] "type checking for CPANPLUS::Backend::RV::new is incorrect"
* Resolve [rt.cpan.org #69203] "custom sources ignores timeout config option"
Changes for 0.9106 Wed Jul 6 09:53:44 2011
================================================
* synchronisation with blead to remove profanity
from the source. No other changes.
Changes for 0.9105 Thu May 5 21:47:45 2011
================================================
* remove any pointers to the sourceforge mailing list
* point to the github repo instead
* Only enable custom sources in the tests where it is actually
required for testing
* Added support to parse_module() for 'Module/Type.pm' parsing
Changes for 0.9104 Tue Apr 19 15:13:57 2011
================================================
* Force Parse::CPAN::Meta to use a sane default for JSON backend
* Make sure that test failures aren't reported twice to the terminal
Changes for 0.9103 Sun Mar 20 00:38:05 2011
================================================
* Fixed the logic not sending NA reports when
'perl' is expressed as a prereq
Changes for 0.9102 Mon Feb 28 11:35:43 2011
================================================
* Only send NAs for a 'perl' prereq when it actually is
Not Applicable
Changes for 0.9101 Tue Feb 15 20:58:30 2011
================================================
* Only a version change for downstream maintainers
Changes for 0.91 Fri Feb 11 22:43:31 2011
================================================
* Making a stable release
Changes for 0.90_13 Mon Feb 7 10:26:35 2011
================================================
* Fix Parse::CPAN::Meta prereq version
Changes for 0.90_12 Sun Feb 6 19:48:49 2011
================================================
* Remove more trailing whitespace spotted by Nicholas Clark
with patch to fix, RT #64976
* Added META.json and MYMETA.json support. Requires a more
recent Parse::CPAN::Meta
* Switch to Digest::SHA and SHA256 checksums instead of
Digest::MD5 and MD5, which has dropped v5.6.x support.
Changes for 0.9011 Fri Jan 7 22:01:56 2011
================================================
* Remove reporting $! after make test fails. It is misleading
in test reports
* Don't unset PERL_MM_USE_DEFAULT if it is already set
in cpan2dist
* Apply blead patches from Peter Acklam
CHanges for 0.9010 Thu Oct 28 23:20:19 2010
================================================
* Added PERL_MM_OPT to the CPANPLUS-Dist-MM test to hopefully
resolve RT#57241 which relates to local::lib and cpanm
Changes for 0.9009 Mon Oct 25 21:03:39 2010
================================================
* Resolve issues with the SQLite source engine
Changes for 0.9008 Mon Oct 25 17:01:34 2010
================================================
* Normalise prereqs version strings before resolving prereqs
Changes for 0.9007 Tue Jul 13 10:44:30 2010
================================================
* Fix the shell test to skip if test is not being run under a
terminal, reported by Justin Case RT #59254
Changes for 0.9006 Fri Jul 9 13:44:22 2010
================================================
* Finally resolved the issue where a prereq on Config would not be
recognised as a core module
Changes for 0.9005 Tue Jun 29 22:42:25 2010
================================================
* Corrected spelling mistakes in POD, pointed out by H.Merijn Brand
* Amend SQLite source engine to set SYNCHRONOUS pragma to OFF
* Make sure that Selfupdate checks if CPANPLUS::Dist::Build is
installed or not and update it if it is. Spotted by Ilmari
* Apply a patch from Peter Ludikovsky RT #55782 that adds indexes
to Source::SQLite
Changes for 0.9004 Sat May 8 22:21:04 2010
================================================
* Applied a patch from Schwern RT #53133 "test failure occurs if
the build directory is symlinked"
* Explicitly set the location of cpanp-run-perl when under PERL_CORE
in t/inc/conf.pl
* Make sure that we find cpanp-run-perl in ../../utils when PERL_CORE
* Apply a patch from Barbie [RT #56768], that fixes regex in
RELEVANT_TEST_RESULT
* Fixed a typo in the POD for cpan2dist, pointed out by Babar
(Olivier Raginel) on irc.
* Add a BEGIN {} block to cpanp-run-perl this resolves RT #55964
and RT #57106
Changes for 0.9003 Mon Mar 15 13:51:12 2010
================================================
* Resolve warnings when using blead perl, reported by Apocalypse RT #55501
* Applied patch from Apocalypse RT #55541 that changes the
behviour when a prereq on a core-only module is detected. We
raise a warning now, but will proceed with the installation.
This is how CPAN.pm handles it.
* Removed one duff mirror and an out-of-date mirror from
our default mirror list. Replaced with fast-sync mirrors.
Changes for 0.9002 Fri Mar 12 13:11:00 2010
================================================
* Added support for CPAN Testers 2.0 (David Golden)
Changes for 0.9001 Thu Dec 24 10:21:11 2009
================================================
* RT #52988 Regression in Internals::Utils, reported by CRAKRJACK
* Fix a regression with dist_type not being propagated
Changes for 0.90 Thu Dec 17 21:40:13 2009
================================================
* Version bump
Changes for 0.89_12 Mon Dec 7 13:33:16 2009
================================================
* Resolve RT #52348 Duplicate test output, reported by Apocalypse
* Fixed typo in Shell::Default, RT #52376, reported by Apocalypse
Changes for 0.89_11 Tue Dec 1 13:14:24 2009
================================================
* Fixed RT #52287 reported by Apocalypse regarding
Test::Reporter barfing on send()
* Change SQLite to AutoCommit, resolves RT #52308,
reported by Apocalypse
Changes for 0.89_10 Sat Nov 28 23:20:09 2009
================================================
* Resolve RT #51516 setting conf options which
include spaces.
* Explicitly use Cwd's chdir in _chdir()
Changes for 0.89_09 Thu Nov 12 21:54:01 2009
================================================
* Only look for missing prereqs in the output of the last
set of tests that were run. This resolves RT #51408,
reported by Andreas Koenig
Changes for 0.89_08 Tue Nov 10 23:29:06 2009
================================================
* Make the default config prefer Build.PL if perl version is
greater than or equal to 5.10.1
* Fix a problem with parse_module() where it would not
resolve some edge-case distributions, addresses
http://perlmonks.org/?node_id=805957
Changes for 0.89_07 Thu Nov 5 14:05:11 2009
================================================
* MYMETA.yml support added from Jos' branch
Changes for 0.89_06 Thu Oct 29 14:55:25 2009
================================================
* Fool the installer into replacing our scripts that were installed
by core with versiononly set.
* Handle PREREQS being mentioned twice in Makefile. Use _vcmp()
to compare the versions, take the highest.
Changes for 0.89_05 Tue Oct 27 09:24:55 2009
================================================
* Change the way editing config files is called. This fixes RT #50832,
reported by Dave Golden
* Issue a warning in the shell if we are on MSWin32, don't have IPC::Run
installed and are writing a log file.
* Apply several patches from Alexandr Ciornii (CHORNY) RT #48636 that
add toolchain versions listing to tester reports.
Changes for 0.89_04 Fri Oct 23 11:12:57 2009
================================================
* Added deprecated dual-life module support which
requires newer versions of Module::CoreList and
Module::Load::Conditional
Changes for 0.89_03 Mon Oct 19 20:06:03 2009
================================================
* Work out if a prereq is a core module and only warn if we can't
satisfy the required version.
Changes for 0.89_02 Sat Oct 17 13:04:59 2009
================================================
* Core module prereqs should be dealt with correctly now.
Changes for 0.89_01 Fri Oct 16 10:22:43 2009
================================================
* Corrected spelling mistake in CPANPLUS::Configure documentation
* Fixed a problem with the core module detection when sending
NA reports
* Internals::Report will use Parse::CPAN::Meta instead of
YAML::Tiny for parsing CPAN Test report data
* Address #50428 Fixed edge-case in the arbitary paths support in
parse_module(), reported by Robert Krimen
* Address #49104 Fixed the SYNOPSIS in CPANPLUS::Module::Author::Fake
reported by Tyler MacDonald
* Address #47820 Don't try to update custom sources if they are disabled
in configuration, reported by Curtis Jewell
Changes for 0.88 Tue Jul 7 12:47:08 2009
================================================
* Adress #47640: [PATCH] [Documentation] Add links to the CPANPLUS
Subversion repository
* Address #47543: Snapshot installation instructions are incorrect
* Add support for $mod->install( target => init ), which only creates
a dist object and stops after the $dist->init stage.
* CPANPLUS::Dist::MM was using an incorrect capture argument for
passing tests. Spotted by Mst.
Changes for 0.87_03 Sat Jun 27 16:27:34 2009
================================================
* Apply VMS patches from Craig Berry
* Address #47250: cpanp always returns true when run in batch mode
$shell->dispatch_on_input now returns a failure indicator if run in
noninteractive mode (which is what cpanp does)
* With the new cpantesters, the yaml files got redone which broke
the ->fetch_report code
Changes for 0.87_02 Sat Jun 13 13:13:58 2009
================================================
* Fix typo in the help message for the default shell
Changes for 0.87_01 Fri Jun 12 18:54:27 2009
================================================
* CPANPLUS now supports installing a directory as well. From the shell,
try: 'i /path/to/module' or 'i .' for the current directory.
Thanks to Chris Williams for the feature.
* Skip EU::I tests due to #46890: ExtUtils::Installed + EU::MM
PREFIX= don't always work well together
* Address #46249: Upgrade requires 'x' because of change in .stored
format CPANPLUS now stores it's own version + that of storable in the
.stored files to ensure the .stored file is compatible with your CPANPLUS.
Additionally, all .stored files are whiped when you update your CPANPLUS
* Address #46055: CPANPLUS::Dist::MM::prepare fails when directory
has spaces. Thanks to James Mastros for the additional patch
* Address #45644: detect broken index. CPANPLUS now checks the header for
02packages.details to see if the file contains at least the amount of entries
specified in the header.
* Find_configure_requires should return an empty hashref on parse
errors, DateTime::Format::Pg triggers this for example
Changes for 0.8601 Mon Apr 27 18:07:34 2009
================================================
* Older versions of CPANPLUS::Dist::Build use the (private) module
CPANPLUS::inc, which got removed in the 0.86 release.
C::D::Build versions of 0.24 and higher are not affected by this,
and CPANPLUS now specifies 0.24 as a minimum requirement.
Users of C::D::Build of version 0.24 or higher need not upgrade.
Changes for 0.86 Sun Apr 26 17:27:54 2009
================================================
* Promote 0.85_09 to stable
* Update bundled modules
Changes for 0.85_09 Thu Apr 23 15:32:49 2009
================================================
* ExtUtils::Installed functions wouldn't work properly if the install
prefix was set to something containing ~, like for example '~/perl'.
If we encounter this, substitute the ~ for the real home dir so
EU::Installed's path lookups work properly.
* Work around a bug in version.pm which causes 64bit 5.8.x installs
to fail big version comparisons. See here for details:
https://rt.cpan.org/Ticket/Display.html?id=45241
Changes for 0.85_08 Mon Apr 20 18:54:49 2009
================================================
* Fix issues with $mod->package_is_perl_core; The conditionals were
the wrong way around, thanks to BingOS for spotting
Changes for 0.85_07 Tue Feb 24 18:27:37 2009
================================================
* Address: #44562: $mod->package_is_perl_code: problem comparing version
strings. The method would warn when a version contained a non-numeric
character. This is now fixed.
* Address #43355: (possibly harmless) Warning in CPANPLUS-Dist-MM
Make sure to quell the warning when 'makemakerflags' is set to
undef instead of the empty string.
* ExtUtils::Installed methods were not handed all possible include directories
to scan, as they were found to vary on non-Unix OS's. All possible paths
are now added for scanning.
* Make sure we don't overwrite $mod->status->dist/dist_cpan so ->save_state
will DTRT upon restore.
* Make sure we call $mod->add_to_include_path again, just in case we came
from ->save_state, at which point we need to restore @INC/$PERL5LIB
* t/20 now uses global verbosity settings
* Avoid duplicates in PERL5LIB, just like we do for @INC when calling
$mod->add_to_includepath and add tests for it.
* Get rid of CPANPLUS::inc; it's not used anywhere anymore
* Remove deleted files from manifest
* Update bundled modules
Changes for 0.85_06 Tue Feb 24 18:27:37 2009
================================================
* This is a test suite fix. Users of 0.85_05 need not upgrade.
* With configure_requires/C::D::Build bootstrapping, the tests in
t/21_CPANPLUS-Dist-No-Build.t were no longer correct and caused test
failures on machines without C::D::Build installed.
Changes for 0.85_05 Mon Feb 16 12:13:18 2009
================================================
* Address: #39399: configure_requires doesn't quite work yet; CPANPLUS now
bootstraps CPANPLUS::Dist::Build and Module::Build if the module-to-be-
installed requires it. Used 't CPAN::Test::Dummy::Perl5::Build' to verify
against a pristine 5.8.8 as well as adding tests to t/21 to make sure this
mechanism works.
* Address #43128: Fixes 'no such module perl on CPAN' errors:
when 'perl' is listed as a prerequisite, its version should be checked,
but should not be checked against the index of modules on CPAN
* Address: #40255: Special case for 'perl' requirement: if a requirement for
'perl' is specified in the META.yml/PREREQ_PM/Build.PL, it is now special
cased and CPANPLUS will verify the version of perl you are using is uptodate.
This is equivalent to the more traditional 'require 5.x.y' at the top of a
Makefile.PL
* Address #41760: [PATCH] Add 'build_dir_reuse' option. This adds
$cb->save_state as an API call, which makes it possible to save
state between two sessions.
* Inspired by: #39095: Multiple modules with different version
numbers in one release go wrong: CPANPLUS now adds the version numbers of the
modules in the Contains: line in the default shell
* Add all the return values from the CPAN Testers report to $mod->fetch_report,
not just selected fields.
* Add $module->installed_dir as a feature; this requires a newer
Module::Load::Conditional
* When a user generated config.pm changes the base dir, CPANPLUS will now rescan
for config files in that base dir too
* New edge case in package naming discovered; adapt regex and add tests
* Address: #41756 (Prerequisite Lists Inconsistent) by using
$cb->_version_to_number for Bundle::* modules as well
* Address: #41157: Module::module_is_supplied_with_perl_core()
broken for perl 5.10
* Address #39948: Test warnings in 0.85_04; quell more warnings
* Address #40892: Fix CPANPLUS::Config docs to be more clear on how
to set/change configs
* Remove independant version statements; all versions are now derived
from CPANPLUS::Internals::Version
* Mention the sqlite backend in a tip
* Test fix to set makeflags as we intended to do. required to deal with IPC::Cmd
0.42, which parses whitespace slightly different on win32
* Updated bundled modules
Changes for 0.85_04 Mon Sep 8 15:37:01 2008
================================================
* Updated CPAN Testers reporting to follow new project guidelines:
modules authors are no longer copied on reports (the dontcc config option
has been removed); failures during *.PL or make stages are now reported
as UNKNOWN instead of FAIL; output buffer now included in NA reports
* Set $ENV{MAILDOMAIN} so that T::R does not try to resolve our maildomain,
which can lead to large timeouts for *every* invocation in T::R < 1.51_01
see: http://code.google.com/p/test-reporter/issues/detail?id=15
* Address #38324: no caching of CHECKSUMS
Checksum files are now cached for 3600 seconds by default to avoid
refetching to often. This can be overrided by force or setting a lower ttl.
* Address #38290: CPANPLUS::Backend->install() always reindexes
Params::Check::NO_DUPLICATES was enabled, and that meant an empty
hash lookup. Use the assigned scalar instead
* Some speed ups for the sqlite engine. turns out dbix::simple's (??)
expansion is very expensive
* Address: #38643: CPANPLUS::Backend methods are not $_ safe.
Make sure all while( <$fh> ) is written as while( local $_ = <$fh>)
* Address #34345: Should be able to send reports via system
add 'cpantest_reporter_args' so you can add extra arguments to
test::reporter's new method sendmail
* Address: #37652: Infinite loop in Setup.pm
This was merely a wording issue; made the help text more clear
Changes for 0.85_03 Wed Jul 23 02:07:11 2008
================================================
* Add experimental SQLite backend for sources. This can be
used instead of the normal memory/storable implementation.
You can enable it by running by starting the default shell
and typing:
's conf source_engine CPANPLUS::Internals::Source::SQLite; s save'
* Selfupdate now understands the SQLite dependencies
* Setup knows how to ask you about SQLite
* CPANPLUS::Dist::new() is now implemented as a properly inherited
method, with no additional magic. Now, dists are instantiated as:
use base 'CPANPLUS::Dist::Base';
CPANPLUS::Dist::YourDist->new;
* Add diagnostic to 's mirrors' to show how to edit the list
This address #37651: Explain the best way to add mirrors
Changes for 0.85_02 Sun May 18 17:40:56 2008
================================================
* Speed up search slightly be not checking the template
* Speed up $author->distributions call a *lot* by not using clone (which
in the end scans through the entire module tree for dslip info)
* Make the package_* functions take an argument for parsing
* Speed up clone() a bit
* Meta files were showing up in the $author->distributions call. These
are now filtered out.
Changes for 0.85_01 Sun Apr 6 15:22:43 2008
================================================
* Address #34519 Getting Wrong File with SENGER/NET-IPFilterSimple_V1.1.tar.gz
The delimiter (_) was being replaced by - after parsing. This is now fixed.
* Depend on a newer EU::Installed (1.42), so we can now install into a non-site
wide dir and actually do uninstalls properly. Requires a few clever dir
manipulations from our side, but it works.
* Change tests in 20.t accordingly so test suite no longer needs to install
site wide for testing purposes.
* When changing the 'lib' param in your config using 's edit' from the default
shell, it wouldn't propagate to the current process. The same applied to
changing the @INC or $ENV{PERL5LIB}. This is now fixed.
* Address: #12355: Add an 'all' option when asking about dependencies.
Users can now select 'yes to all' or 'no to all' when asked about
installing prerequisites.
* Implement the META.yml directive 'configure_requires:', which states a
package needs to be installed before running Makefile.PL. This uses the
new module Parse::CPAN::Meta, which is now bundled and part of the core
prerequisites.
* Address: #31279: CPANPLUS should automatically install Module::Build and
necessary tools. We now automatically add CPANPLUS::Dist::Build to
'configure_requires' when it's needed to install a module and not present
* Address #32248 to make it possible to turn off custom sources by doing:
's conf enables_custom_sources 0' from the default shell or config file.
* Address: #32064: NA reports generated for failing tests where core
prereqs are specified. Use CPANPLUS::Module::module_is_supplied_with_perl_core
to detect if a module is part of perl core or not.
* Add proper support for installing autobundles. $mod->is_bundle recognizes
autobundle snapshots too now.
* Quell 'non numeric' warnings when loading modules that have a non-float as
version numbers.
* In the default shell, show version numbers in loaded plugin overview.
Changes for 0.84 Fri Dec 14 13:31:39 2007
================================================
* Promote 0.83_10 to stable.
Changes for 0.83_10 Wed Nov 14 12:57:45 2007
================================================
* Various VMS patches from John M.
* Skip tests for custom sources on Win32 if the full file
path is longer than 260 chars (longest file size supported
on Win32).
* Depend on File::Fetch 0.13_04 for Win32 & VMS file:// support
* Depend on Term::UI 0.18 for default shell option parsing
Changes for 0.83_09 Fri Nov 9 14:17:14 2007
================================================
* Make sure to use $Config{path_sep} to create
environment variables portably. This addresses
a test failure on VMS.
* Update 'use sudo' heuristics; if you have $ENV{PERL_MM_OPT}
set with an INSTALL, LIB or PREFIX option, we assume you
have write permissions to your install location, and you
do not need sudo. This can of course be overriden using
your config.
Changes for 0.83_08 Sat Nov 3 18:35:54 2007
================================================
* Apply adapted version of dmq's Win32 fixes for fetching
file:// URIs. This depends on File::Fetch 0.13_01 or greater.
Changes for 0.83_07 Wed Oct 24 17:42:43 2007
================================================
* VMS patch from John M:
_safe_path must be called before catdir because catdir on
VMS currently will not handle the extra dots in the directories.
* Make sure we clean up tempdirs when writing custom index files.
Changes for 0.83_06 Tue Oct 23 11:31:10 2007
================================================
More VMS fixes from John M:
* C::I::Utils->_safe_path should do nothing if it is given a path
in VMS format already.
* In 15_CPANPLUS-Shell.t, two regex's needed to be case insensitive.
* In C::Dist::MM, do the _safe_path on the $dir path, not the path with
a file. The _safe_path must be done before the catfile() builds the path.
* In C::Shell::Default::Plugins::CustomSource, try the hash lookup with a
lower case key on VMS if the exact case key failed.
Changes for 0.83_05 Wed Oct 17 15:21:01 2007
================================================
* Address #29904: make test should not use sudo. Don't try to install if
the configuration thinks sudo is needed -- that's no guarantee it will work
* More VMS fixes from John M:
* Make sure file look ups are done case insensitively for custom sources
* Make ->module_tree work case insensitive on VMS by calling ->search
under the hood
* Revert back to old behaviour in ->_all_installed now that ->module_tree
is fixed for vms
* Depend on version 0.73, for ~0 bugfixes
* Don't depend on File::Fetch for test reporting -- it's already part of
the core cpanplus chain
* Update bundled modules
Changes for 0.83_04 Mon Oct 15 14:18:40 2007
================================================
* Set ENV COLUMNS & LINES to make sure Term::ReadKey can figure
out dimensions and stop it from dying in the test suite.
* More VMS fixes from John Malmberg
Changes for 0.83_03 Mon Oct 15 11:38:39 2007
================================================
* Make $mod->dslip() query other modules in the same package if there's no
dslip entry for this particular module.
* Add an --install option to cpan2dist
* More VMS fixes from John Malmberg
Changes for 0.83_02 Tue Oct 9 13:46:48 2007
================================================
* Add a /cs plugin to CPANPLUS::Shell::Default allowing you to add custom
sources from outside the CPAN. These custom sources are attributed to the
author 'LOCAL' -- See '/cs --help' from the default shell.
* Improved parsing for URI targets to parse_module: try to determine module
name and version contained in the tarball if posible
* Address #29796 (error with funktion 'o' after installing Alien::wxWidgets)
File::Find dies when it encounters a dir or symlink twice, which is what
A::wxWidgets does. Use follow_skip => 2 to get around this.
* Address bug #29716: 20_CPANPLUS-Dist-MM.t fails (and leaves test files
installed) when EUMM options include INSTALL_BASE
* Address #29430: Remove LWP as a dependency for CPANPLUS::Internals::Report
it now uses File::Fetch, like the rest of CPANPLUS. Thanks to BingOS for
reporting
* Apply patch #29218: Patch to use YAML::Tiny instead of YAML for
test reporting
* Apply Change 31800 by rgs@stcosmo to recognize 5.10 as a valid perl version
* Require Module::Load::Conditional 0.18 -- this uses version.pm for
version comparisons
* Depend on T::Reporter 1.34 due to many bug fixes
* Enable verbose mode in tests if ENV{PERL5_CPANPLUS_TEST_VERBOSE} is true
* Load the module tree before attempting to write a bundle, just in case
we chdir and things go haywire
* Allow passing of a $Conf to C::S::Default->new
* Delay plugin initialization until C::S::Default->new time
* Delay loading of CPANPLUS::Configure as long as we can, so we can still
pass our own $Conf iif possible
* Add test cases for CPANPLUS::Shell::Default->dispatch_on_input
* Disable pager during tests
* Use absolute path to our dummy-cpan dir, as some of the underlying code
may chdir
* Add constant for author name to be used in tests
* Replace 'print' and 'printf' calls with '$self->__print' and '->__printf',
so we can do proper tests on the output
* Don't use ~0 as a max version number, but divide by two, so we don't
get integer overflows in version.pm
* Add C::I::Utils->_uri_decode and C::I::Utils->_uri_encode for URI encoding
to be used by the 'custom sources' code.
* Make C::I::Utils->_host_to_uri properly unixify a path
* Make sure $cb->installed works on vms by dealing with filenames and
case sensitivity correctly. This is another patch from John M.
* Fix up _safe_path for VMS, this can now be released
* Move all distributions under dummy-CPAN down two levels (from
authors/id/E/EU/EUNOXS to authors/id/EUNOXS) to get around VMS/VAX 8
directoy level depth
* Another vms fix by John M: 'Makefile' is called 'DESCRIP.MMS' on VMS,
depending on what 'make' was used to build perl
* Weird Unix vs VMS file type issues on VMS, add a work around provided
by John M.
* Use a search on VMS when figuring out what moduels are installed, as the OS
doesn't retain case, so we can't do a direct lookup in the module tree
* 1 while unlink fixes from John M. for VMS
* Proper %ENV restore fix on VMS from John M.
* Apply a VMS patch from John Malmber as offered in his mail to p5p
3rd of Sept. 2007 [patch@31780] fixes for cpanplus on VMS:
In lib/CPANPLUS/Internals/Extract.pm, catdir on VMS can not deal
with directory components with dots in them. Need to translate
them as VMS.C in the default mode expects them. This is a temporary
hack that will need to be revised as ODS-5 support is integrated in to Perl.
* Reset %ENV explicitly on VMS. John Malmberg reports (on 3/9/07) that
changes to %ENV persist on VMS, causing an overflow after a few runs,
since we append to it.
* Be case tolerant -- especially VMS seems to suffer from this. In
the end, almost all FS, except some UNIX ones are case tolerant,
so just use a qr//i
* Apply Change 31776 by craigb@craigb-brianor on 2007/08/31 22:42:43
catdir was used where catfile was meant in C::I::Extract
Changes for 0.82 Wed Aug 15 15:36:57 2007
================================================
* Address [perl #43629] Perl 5.9.5. cpanp-run-perl not present
as reported by Michael Cartmell. When running the tests, don't
scan your include dirs/home dir for other CPANPLUS::Config::*
entries, as they might contain data not correct for this test
run.
* Search the path paralel to your $^X explicitly for cpanp-run-perl
(suggested by david cantrell)
* Various clean ups in the CPANPLUS::Shell::Default::Plugin::Remote
plugin.
* Small documentation fixes.
Changes for 0.81_01 Sat Jul 7 10:45:37 2007
================================================
* Add a callback to the CPANPLUS core for munging metafiles
* Address #27562 (A way to specify external dependencies would be
grand) by adding a --edit-metafile option to cpan2dist to allow
you to edit generated metafiles, if your ::Dist::* plugin supports it
* Make common shell options clearer in both hints and help message
* Address #27914: Make the instructions in the Makefile.PL clearer
as to how to install prerequisites. Patch submitted by Andy
Dougherty
* Address #27910: we didnt check for Module::Signature being
present, just it's prereqs when heuristically configuring CPANPLUS
for signature checking. Now, we also check for Module::Signature
* Address #27913 documentation error in Makefile.PL that incorrectly
showed how to invoke interactive configuration after installation
* Clearer diagnostic when cpanp-run-perl can't be found
* Apply steveh's patch to scan for .bat files as well on win32 when
looking for installed programs
* Whitespace patch from audreyt
Changes for 0.80 Sun Jun 17 13:50:01 2007
================================================
* Promote 0.79_04 to stable
* apply patch to fix win32 short path fixing when arguments are
given (thanks to steve hay for tracking it down)
* Print header diagnostic during tests to show how to run
tests in verbose mode for added debug output
* Update bundled modules
Changes for 0.79_04 Tue May 29 08:50:07 2007
================================================
* Removed a fatal debug statement from cpan2dist. Users of
cpan2dist should upgrade to this release. No other users
should be affected.
Changes for 0.79_03 Fri May 18 19:44:35 2007
================================================
* address: #27057: Dry runs and dep tree. Make it possible to view
which modules will be updated for what reasons when running
'selfupdate'. 's selfupdate' in the shell now prints this
dependency tree out and also offers a --dryrun option
* address: #27174: No way to pass case-insensitive patterns to
ignorelist; All --ignore/--ban options for cpan2dist are now case
insensitive
* address: #26583: display of installed/required in report is
confusing; Add a header to the columns generated for clarity
* tweak test conf to play nicer with perl core
* show version number when testing/installing
* add callback to allow to continue after a failed 'make test'
or 'build test'
* reapply core patch #31028 -- it got lost somehow
this fixes test setups under perl_core
* add --set-config and --set-program to cpan2dist to overwrite
random config entries for this invocation only
* document all the options in CPANPLUS::Config
* make saving cpanp-boxed config Just Work and add a banner to
cpanp-boxed to tell you how to
* expand the help text for 's' with options where applicable
* clarify * and .. hint in default shell
* silence warning in config.pm when a path to an .exe is not defined
* The test suite now adds the '/nologo' option when the user
has 'nmake.exe' configured as their 'make' program, to limit
the amount of noise on the terminal.
Changes for 0.79_02 Tue May 8 13:14:12 2007
================================================
* address #26914 : CPANPLUS depending on Crypt::OpenPGP even when gpg
is available. Change heuristics so we always use gpg when it's there
and don't suggest to install Crypt::OpenPGP, as it's quite broken on
a lot of platforms. This may cause a warning or 2, but all will
continue to work
* Logic bug in 'selfupdate --latest=0' is now fixed, with --latest=0
selfupdate should no longer be picking the newest version from CPAN
if the current version is good enough
* let perlwrapper be '' as well -- '-P' actually changes the format
of some generated Makefiles
* perlwrapper is no longer required to have Dist::MM to be available
* apply Change 31121 by steveh@mugwump on 2007/05/03 07:51:17
this gets around the 'read only' issue of some files in perl-core
when rsynced/extracted from uupacktool under win32
* cleanup t/.cpanplus dir when doing 'make clean' as well.
* make sure we pass 'prereq_format' along, so prereqs get packaged
properly as well. This addresses a mail from Hans Dieter Pearcey (hdp@icgroup.com) raising the issue.
Changes for 0.79_01 Sun Apr 22 09:57:45 2007
================================================
* Updates to integrate perl-core integration. Regular users
do not need to upgrade.
* Add clean up calls at the end of the tests as well if
we're run from perl core. this is because perl core
doesn't invoke our 'make clean', and files will be
left that aren't in the manifest.
* Make the scan for 'cpanp-run-perl' also consider cpanp-run-
perl5.X.Y as it may be installed with the perl version as
suffix explicitly
* address: 26077: dependency on itself; CPANPLUS had a
depenendency on the shell class you set as a default, even
if that was a shell provided with CPANPLUS itself.
This caused CPAN.pm to throw a fatal error, as it did not
know how to resolve this dependency. CPANPLUS users were
unaffected. Now, no dependency is added if the selected
shell is bundled with CPANPLUS itself.
* Add simple loadtest for CPANPLUS::Shell
Changes for 0.78 Sat Mar 31 18:26:13 CEST 2007
=====================================================
* Promote 0.77_07 to stable
* Update license & contact information
* Make sure we don't install 'cpanp-boxed' when running
'make install'.
* Update bundled version of Module::Install
* Set install target to 'perl' for perl5.9.5 and higher
Changes for 0.77_07 Fri Mar 23 17:19:07 CET 2007
=====================================================
* Smoke test revealed issue that PERL5_CPANPLUS_IS_VERSION
may not be formatted identically as $CPANPLUS::VERSION
if certain versions of 'version.pm' are loaded. This is
now addressed.
* Tests for CPANPLUS::Dist::MM would fail on Win32 if the
path to the Makefile.PL contains spaces. This is now
addressed by calling Win32::GetShortPathName() if run
on Win32.
Changes for 0.77_06 Fri Mar 23 13:29:54 CET 2007
=====================================================
* Various test reporting fixes;
* Add the leading '!' to missing prereqs, inspired by CPAN::Reporter
* Address bug #25327: do not count as FAIL modules where prereqs are
not filled. Now, when tests fail and:
* version of prereqs installed is too low, send NA
* prereq is not available on CPAN, send NA
* Address: #25410: cpan2dist needs posibility for passing arbitary
parameters to $obj->install; cpan2dist now accepts --dist-opts foo=bar
* Add PERL5_CPANPLUS_IS_VERSION as environment variable. It's set to
the version of CPANPLUS running. Requested by Adam Kennedy <cpan@ali.as>.
* Last statement evaluated in a Makefile.PL may be undef -- so don't die
on that case in cpanp-run-perl
* Some users add '.pm' to their package tarballs. fix the package
string parser to recognize this and deal with it.
* Address #25038 (Wrong platforms for MSDOS) and actually
test modules in the MSDOS:: namespace on dos|os2|MSWin32|cygwin
Changes for 0.77_05 Sun Feb 25 17:17:44 CET 2007
=====================================================
* Set $ENV{PERL5_CPANPLUS_IS_EXECUTING} to the full path of the
Makefile.PL file when running 'perl Makefile.PL'.
Requested by Adam Kennedy <cpan@ali.as>.
Changes for 0.77_04 Mon Feb 19 08:05:52 CET 2007
=====================================================
* CPAN testers reported test counter mismatches when test reporting
was enabled vs disabled. This is purely a test counter issue. No
functional code has been replaced.
If you have installed 0.77_03, there is no need to upgrade to
0.77_04.
Changes for 0.77_03 Sun Feb 18 17:35:12 CET 2007
=====================================================
* Rework the parse_module code; regex is more complex, but also more correct
* Allow for more lenient parsing of module names, when the module name
and package name do not match
* Extend parse_module documentation to include URI
* Patch Module.pm->package_name regex to also parse 'perl5.6.1' style packages
* The package_[name, version, extension] subroutines are also reworked
and use the same regular expression as parse_module does now
* Add 'name' to the list of accessors returned by $mod->accessors (it's
an alias to ->module)
* 'installsiteman3dir' is a 5.8'ism which causes warnings under 5.6
so only check it if it is defined
* Add the version number to the install log file name
* Add "rescan" option to $conf->init to re-check your path for valid
CPANPLUS::Config::* files
* Warn if you're using the old "PERL5_CPANPLUS_CONFIG" env var to point
to specific config files ( rt #23721 )
* Make $conf->save return the file name it saved to
* Apply the suggested patch from Grant Mclean that calls $cb->flush(lib)
just before 'make install' is called, so the blib/ dir is no longer at
the front of the path. XML::SAX was writing a file dynamically based on
@INC.
* address RT #22962 Funky error messages when command-line args are missed:
the default shell now has increased parsing logic
* The check to see if the 'storable' feature was enabled was faulty. This
has now been fixed.
* Use the full path to a module's Makefile.PL when installing a module, so
we don't pick up another Makefile.PL that happens to be in your @INC path.
* No longer use can_run() to find cpanp-run-perl, as it's not an executable.
Scan path manually in CPANPLUS::Config.
* Document details() items properly
* Show installed file in the details section
* Fix documentation error for $cb->_home_dir (#rt 23196)
* Log which configs are loaded at startup time; The shell default's banner
shows you how to view these logs.
* Make /showtips a plugin command
* Extend CPANPLUS::Shell::Default synopsis with --xxx style options
* Move to dummy modules for our tests, rather than bundled real modules.
* All .t files now use t/inc/conf.pl exclusively for changes in the
PATH/ENV/etc settings. This fix allows CPANPLUS to test cleanly with
bleadperl (5.9.5)
* Clean up the .cpanplus dir in the dummy-cpanplus directory at the
start of every test to make sure we're running with a clean cache
* Test fixes for Win32
* Disable IPC::Run on Win32 during 'make test'. IPC::Run gets unhappy
about having 'odd' FDs allocated to it under Win32.
* Update bundled modules
* update bundled modules, includes version.pm for the first time
* Add realclean targets for our dummy perl directory
Changes for 0.077_02 Fri Oct 20 15:28:22 CEST 2006
=====================================================
* Implemented selfupdate functionality. You can use
's selfupdate' from the default shell. This will also
work for bootstrapping purposes
* Hints to use 'Bundle::CPANPLUS::Dependencies' have
been removed in favour of 's selfupdate'
* The default shell now shows tips at start up
* Dont throw an error if a core module has the same
version as it's duallifed counterpart on CPAN --
we can still install from CPAN
* Update bundled modules
* Remove cpanplus inc dir from @INC once we dispatch to
cpanp from cpanp-boxed
* Depend on newer versions of Object::Accessor and IPC::Cmd
Changes for 0.076 Fri Oct 13 14:37:27 CEST 2006
=====================================================
* run external perl commands using cpanp-run-perl to enable
autoflushing cross-platform, cross-ipc-module.
* separate formats for printing 'conf' and 'program' sections
* Add Module::ThirdParty support [rt #12131], see
'CPANPLUS::Module' documentation for usage
* add cpantest_mx config option [rt #21346], see
'CPANPLUS::Internals::Report' documentation for usage.
* update bundled modules, most notably IPC::Cmd, which should
improve executing sub-commands significantly.
Changes for 0.075_01 Thu Oct 5 17:08:27 CEST 2006
=====================================================
* Various small fixes to make CPANPLUS work better on Win32
Most of these fixes are done in the bundled modules or
dependencies of CPANPLUS
* update bundled modules from CPAN
* no longer bundle IPC::Run, it's too unreliable
* delete failed requires from %INC in cpanp-boxed
* make sure we use 4-arg substr to avoid warning in default shell
* skip undefined messages to error()/msg()
Changes for 0.074 Fri Sep 8 13:12:37 CEST 2006
=====================================================
* remove the requires: section in META.yml; CPAN.pm
thinks it's authoritive for requirement declarations
and therefor gets our prereqs wrong.
* replace CPANPLUS::Dist::Sample with the actual
functional CPANPLUS::Dist::Base
* increase the number of digits after the comma displayed
in version numbers from 4 to 6, so that stringified x.y.z
versions display properly in the Default shell.
* add the writing of intsall-logs automatically from the
default shell
* update bundled modules
Changes for 0.073_01 Wed Aug 2 15:40:38 CEST 2006
=====================================================
* 'install Bundle::CPANPLUS::Dependencies' should
now work properly from cpanp-boxed, even without
a --force option
* Up requirements to more recent versions of among
others Archive::Extract, CPANPLUS::Dist::Build,
File::Fetch & Module::Load::Conditional.
* Update bundled modules for cpanp-boxed
* Don't change versions of bundled modules, this
breaks 'use Foo 1.0' statements in our dependencies
Uptodate check is now done with a new feature in
Module::Load::Conditional that can check %INC.
* Rework cpanp-boxed to deal better with bundled
modules and their uptodateness
* Move module::pluggable code to runtime rather than
compiletime this makes 'require CPANPLUS' not run
around the FS looking for config files until they
are needed
* Address #20737 (Failed to Setup CLI Programs with
Arguments) where the interactive configuration
wouldn't let you specify options to CLI programs
* Address #20640: Always Sent 'pass' Report With
'force' => 1. Test reports are now marked as
'fail' when they fail, even when 'force' is true.
* sent mail to module-build@perl.org with the
patch for C::D::Build to have the same behaviour
Changes for 0.072 Fri Jun 23 18:17:00 CEST 2006
=====================================================
* This is a major release of CPANPLUS. It includes
all the changes from release 0.070_01, including
the following changes made after the beta was
released:
* The POD text of CPANPLUS.pm has been revamped to
be more of a guide than a technical reference.
* $module->status is now lazily initialized, lowering
overall RAM usage and startup time at the cost of
a runtime penalty. Overall, this improves performance
significantly.
* Address #20005: CPANPLUS does not check size of
downloaded module this adds code that checks if
the downloaded size is equal to the size specified
by the checksums file
* Fix file fetching testing issue on Win32 (#18702)
Changes for 0.070_01 Mon Jun 19 17:23:38 CEST 2006
=====================================================
* This is a major beta release of CPANPLUS, revamping
the configuration mechanism. From now on, CPANPLUS
no longer requires a setup to be run at installation
time and should work 'out of the box' on most
systems using a pre-built configuration file.
* CPANPLUS now supports stacked configuration files:
* CPANPLUS::Config is the heuristic config file
which will always be installed sytemwide.
* CPANPLUS::Config::System is the systemwide
config file which can be installed by an admin
in your perl installation path. This file will
be available for everyone and override settings
from CPANPLUS::Config
* CPANPLUS::Config::User is the per-user config
which can be installed by any user in their
$HOME/.cpanplus directory. This file will be
available for the user only and override settings
from CPANPLUS::Config and CPANPLUS::Config::System
* $HOME/.cpanplus/lib gets added automatically to your
config search path.
* All configuration types can be created and saved
via the interactive Setup. You can invoke it from
the default shell as follows:
CPAN Terminal> s conf user # per user config
CPAN Terminal> s conf system # system wide config
or during installation time like this:
$ perl Makefile.PL --setup
* Makefile.PL has been stripped from all it's magic
* Setup is now menu based for a better user experience.
* make loading plugin configs work, with priority
for system & user configs before the rest
* address #19438: Key 'file' is of invalid type
Turns out it's a bug in Module::Build, reported as
#19741, which creates a 'Build' file when running
'perl Makefile.PL' on a M::B generated Makefile.PL
Add a patch that detects this situation and informs
the user
* Demand Test::Harness 2.62 to be installed due to
bug #19505 in earlier versions
* IPC::Run is now required for Win32 & Cygwin
* use $Config{path_ext} instead of hardcoded ':' to
seperate $PATH in cpanp-boxed
* Small test changes in 20.t to make sure no test output
counter mismatches occur.
* remove all 'clever' code from CPANPLUS::inc, as the
new config methodology makes it obsolete. Basic
functionality is retained only for backwards compat.
* remove CPANPLUS config version checks back and forth
-- should work without from now on
* make cpanp-boxed work from others dirs than just bin/..
* make use of package::constants
* Make sure Bundle-Foo.tgz also gets recognized as bundle
* Data::Dumper indenting style set to '1' in default shell
* make constants for libdir etc accept a list, not just
a single param
* address #19738: bogus entry in @INC
* address: #18270: cpan2dist --archive breaks with
relative path
* address #18121: invalid value for 'checksum_value'
which showed that old .stored files can mess up CPANPLUS
untill they are rebuilt. From now on, Makefile.PL will
delete old .stored files when installing a new version
* mark all the versions of inc/ modules as -1, so we
are always 'not uptodate' when asked to install them
* remove old api that lets you set values in configure
object via backend->new or configure->new, which was
impractical and unused.
* updated our bugreporting address to point at the
rt.cpan.org queue.
* Clean up source tree from obsolete files
* Have 'make clean' clean up all the generated files
Changes for 0.061 Wed Mar 15 16:09:03 CET 2006
=====================================================
* The template for the original configuration got shipped
with a few default values that will not work on every
system. Anyone who manually configures should not be
affected, but the automated configuration may draw
the wrong conclusion.
For safetey sake, and to minimize possible issues for
users, this release ships a template with sensible
cross-platform defaults again
Changes for 0.060 Fri Mar 10 17:19:06 CET 2006
=====================================================
* This is a major release of CPANPLUS, supporting
3rd party package creation and shell plugins
* include bin/cpanp-boxed for a bootstrapped version of cpanp;
this allows you to use cpanp without configuring/installing
anything.
* Include clear installation instructions in the README, beyond
the simple 'perl Makefile.PL; make; make install'
* save sources to disk after creating the trees, not at end of script
this should speed up closing the application, at a one time overhead
when parsing the sourcefiles
* add more diagnostics on updating source files
* Make CPANPLUS::inc redundant -- bundled modules required for boot
strapping no longer get installed.
* Update bundled modules for bootstrapping to most recent versions
* Various tweaks to Makefile.PL to make installing friendlier
* perl Makefile.PL AUTOINSTALL=1 now no longer requires any user
input (just like $ENV{PERL_MM_USE_DEFAULT} already did).
* Filter out .meta files from the CHECKSUMS file
* apply patch from yperl@club-internet.fr to stop Makefile.PL
from dying if user doesn't want to configure now, and doesn't
have an existing config.pm
* fix typo introduced in 0.052 that broke Classic.pm
* fix cpan2dist's ungraceful dying if the dist object was undefined
(fixes part of [#17568] bad diagnostics from checksum errors/cpan2dist)
* address #17655: [WISHLIST] Report bad signature send out a fail test
report when a signature check fails
* address #17984: (Two Problems in Makefile.PL)
Changes for 0.059_01 Sat Oct 15 14:20:16 CEST 2005
=====================================================
* This is a development release supporting 3rd party
package creation and shell plugins
* Add new callback to filter prereqs
* Add plugin support to the default shell
* Add a howto on writing plugins:
CPANPLUS::Shell::Default::Plugins::HOWTO
* Set Data::Dumper::Indent to 1 in the default shell
* Document --update_source switch in the default shell
* Add 's mirrors' to the default shell documentation
* Improve Internals.pm documentation
* Add basic documentation to undocumented functions
in Utils.pm
* Implement proper 'ignore' option for cpan2dist and
rename old 'ignore' to 'ban'
* Allow the --*list options to cpan2dist to be given
more than once.
* Fix typo in cpan2dist that wasn't setting the makefile
preference correctly
* Add an option to redirect output to cpan2dist
* Add alarm functionality to cpan2dist
* The 'sudo' setting is now being defaulted to its
previous setting during setup
* Attempt to show what previous config was found during
setup if possible.
* Disable checksums fetch when downloading readme
* Store found prereqs in the dist object when we can
* Use constants for strings where possible.
* Determine installer type in CPANPLUS::Module::dist()
if we haven't already
* Support both cp_error/error and cp_msg/msg as
diagnostic functions
* When extracting files, make sure +x is set on directories
* When extracting files, store their names
* Renamed vcmp() to _vcmp() to mark it's privateness.
* Add a seperate method in Dist.pm to check if a prereq
has been satisfied, so modules subclassing Dist.pm may
override it (thanks to Ken Williams).
* Add an 'add_to_includepath' method to Module.pm, so
modules can add their build paths to @INC.
* Module::Build's 'perl version too low' diagnostic changed
between releases. Make sure our test reporter understands
both (fixes [#15197], thanks to Barbie)
* t/01_CPANPLUS-Configure.t doesn't load CPANPLUS::Config
directly anymore, as there may be an %ENV setting
* Fix t/05_CPANPLUS-Internals-Fetch.t to compensate
when being on non-unixy platforms [#1455]
pointing to the config file instead
* Update bundled modules to their latest version
Changes for 0.0561 Sat Aug 20 19:57:15 CEST 2005
=====================================================
* This release holds no functional changes over 0.056
* The META.yml did not get included in this distribution,
meaning the PAUSE indexer indexed our include modules as
well.
Changes for 0.056 Sat Aug 20 13:31:17 CEST 2005
=====================================================
* This release is identical to 0.056_01 but no longer
marked as 'development release'.
Changes for 0.056_01 Thu Aug 18 16:26:52 CEST 2005
=====================================================
* This is a development release testing the splitting
off of CPANPLUS::Dist::Buid into it's own package.
* CPANPLUS::Dist::Deb got branched into it's own package
* Make 'i URI' work from the default shell, enabling commands
like 'i http://example.com/module.tgz'. parse_module()
understands this as well (for API users) -- #11479
* Add test cases for lack of CPANPLUS::Dist::Deb
* Add new test tarballs that provide the simples possible
distributions
* Add prereq to CPANPLUS::Dist::Deb if the user prefers
to use Build.PL over Makefile.PL
* Add a depencendency on Win32::Process on Win32 (bundled
with AS perl, needed by IPC::Run)
* Quell warnings about empty prerequisite lists (#13111)
* Quell warnings about beta-versions being non-numeric (#14106)
* Platform dependant modules were /always/ getting an NA grade
regardless whether they failed or not (#13224)
* Config keys are now sorted when printed in the default shell
(as requested by Tux)
* Extracted files now only get +w for the owner, not '755',
as this interferes with some modules test suite ([#13358])
* Some modules uses module_name_version.ext rather than the
usual module-name-version.ext. CPANPLUS now parses both
correctly (#13367)
* 's mirrors' in the default shell now lists your mirrors.
To alter them you must still edit the config using 's edit'
* Buffers are now autoflushed while invoking 'perl Makefile.PL';
Modules that asked questions during interactive install
sometimes had their output held back in the buffer. Since not
all modules do $|++ in their Makefile.PL, we do it for them
(#12121)
* The diagnostic reporting functions 'msg' and 'error' from
CPANPLUS::Error got renamed to 'cp_msg' and 'cp_error'
respectively, to avoid conflicts with Log::Message::Simple.
(This only affects API developers).
* All bundled modules are updated to their most recent version.
Changes for 0.055 Sat Jun 4 15:53:37 CEST 2005
=====================================================
* This release just affects users of the Test::Reporter
and 'cpantest' utilities.
* The 'munge_test_report' callback was getting the
grade passed as of 0.054, but the default callback
was now returning the wrong item. [#13086]
Changes for 0.054 Fri Jun 3 17:44:40 CEST 2005
=====================================================
* This release paves the way for the CPANPLUS::Dist::*
plugins, providing a framework from which to
automatically create distributions from CPAN packages
* Redo the 'cpan2dist' commandline tool, adding many
new options
* Record all messages from the 'make' command on the
stack regardless.
* Use the word 'test' when testing modules, not 'create'
* Note in test reports that we skipped tests [#11587]
* Fix some small documentation error [#11570]
* Double check if a module is uptodate before asking
the user -- another prereq may have installed it
already [#11840]
* Do a 'grep unique' on missing prerequisites, so we
dont list them more than once, even if the test output
does -- fixes bug [#11637]
* Make sure we use an empty 'dist_type' in the tests in
case the user set on in his config
* Add a _copy function to Utils.pm
* Make sure the 'force' flag is propagated properly to
the 'resolve_prereqs' function
* Add build_prereq flag to indicate prereqs should be
built even when uptodate when run under a packagemanager
* When running CPANPLUS from a path not (absolutely) in
your @INC, we add our own path to 'original_inc' which
we restore on shell outs
* Pass the grade to the 'munge_report' handler
* Many test report improvements as provided by Barbie
in ticket #12302
* Not all prereqs live on CPAN -- skip noting them as a
loaded prereq if we can't find it in the module tree
(as reported in #12723)
* Bundled a version of T::H that does supports the 'no_plan'
feature of Test::More (#13019):
We can't automatically do 'the right thing' as 'make test'
invokes 'test_harness' which loads T::H before we can even
interfere so we add a msg about too low version to the
Makefile.PL instead and fall back to basic tests
* Tell users why their sudo password might be asked during
'make test'
Changes for 0.053 Fri Feb 11 10:07:08 CET 2005
====================================================
* 0.052 did not ship with its META.yml, causing a few
of the bundles modules to be indexed. This release is
only relevant to the PAUSE indexer, and changes nothing
on the client side whatsoever.
Changes for 0.052 Wed Feb 9 18:44:13 CET 2005
====================================================
* Make auto-installation work (with some guess work) if
$ENV{PERL_MM_USE_DEFAULT} is set.
* Setup decent defaults for the callbacks, so scripts
don't have to set them unless they want actual callback
behaviour (This helps ExtUtils::AutoInstall greatly).
* chmod() extracted files to 755 so we do not get permission
denied errors when trying to remove them or copy over them
if they were not +w for the user.
* Don't use sudo, even if it's configured, if the user is
root already.
* Default to 'prefer binary programs' if Compress::Zlib is
not installed.
* Make 'parse_module' deal better with paths that have sub
directories in them.
* Make 'parse_module' deal better with version numbers
that have letters in them.
* Don't shell out to get the perl version if the perl we
looking for is $^X;
* Improve finding a proper homedir for cpanplus on VMS
* Accept the perl version as an optional argument to
'module_is_supplied_with_perl_core'
* Require Test::Reporter 1.27 for test reporting; it fixes
many bugs.
* Only load Module::Build when we really needed it, not on
any installation.
* Fix a bug that made 's reconfigure' not use the defaults
from your current config.
* RedHat 9.0's stock perl has a few serious bugs in it
(they applied custom patches) and will break CPANPLUS
badly. Add a note to the makefile.pl that redhat users
should upgrade their perl.
* CPANPLUS::inc was encountering 'use' calls that had windows
paths rather than unix paths (???). Patch to compensate
for this.
* Module::Load::Conditional cache is being flushed in standard
flush runs now, allowing use of LWP (and similar) when it
becomes available, even if it previously wasn't.
* Don't copy 'Config.pm-orig' to 'Config.pm' during Makefile.PL
stage -- if the user has a custom config and forgets to set
the environment var, CPANPLUS' tests will use the wrong config.
* Some tarballs have '.' as directory, rather than project sub
directory. Guess first for extraction dir and verify, only
then try the actual extract path.
* Improve documentation in the Default shell
* Improve test reporting texts as supplied by Barbie
* Add a callback to munge test reports before they are sent
* Add versions of loaded dependencies to the test reports.
* Make limited tests on skipped configuration work properly.
* Don't use sudo to install into our own sandbox for
Module::Build tests
* Skip module::build tests if we're under PERL_CORE and
M::B is not available (not yet integrated)
* Skip install tests if run under PERL_CORE
* Adjust include paths and paths to perl when tests are
run under PERL_CORE
* Update bundled IPC::Run to version 0.80
* Update bundled Module::Build to version 0.26081
* Improve tests
Changes for 0.051 Fri Jan 14 15:10:02 CET 2005
====================================================
* First official release in the ground-up rewrite '0.05x'
series
* When determining installed versions, don't parse
commented out versions
* Version numbers of 'undef' aren't really versions, they
are now treated as '0.0'
* Split out 'create' into 'prepare' and 'create' so that
package manager plugins can provide an option to alter
metadata before actually building the package
* Add convenience methods for 'prepare' and 'create'
* Update CPANPLUS::Dist::Sample docs to reflect new
prepare functionality
* Use constants where possible
* Add new methods 'contains' to get a list of modules
contained in a package
* Update to bundle Module::Build 0.2607
* Return to prefering Build.PL over Makefile.PL
* Update various other bundled modules
* Bundle Module::Pluggable for Dist:: plugin support
* Missing test suites of module was not detected
properly, resultings in undeserved 'pass' grade
* dslip data with ';' in it caused parse errors
* Mark a fatal error when loading the shell and not being
able to load a valid config file
* Various spelling fixes
* Improve tests
Changes for 0.050_04 Sun Dec 26 16:54:46 CET 2004
====================================================
* Add rsync support to CPANPLUS
* List rsync mirrors during setup
* Default to the email mentioned in Config.pm during setup
* Add timeout support for fetching files from mirrors
* Config version has gone up because of new timeout version
-- reconfiguration required
* Mention Bundle::CPANPLUS::Dependencies in the Makefile.PL
* Add license information to dslip output
* Send N/A Grade to cpantesters when your perl version is
too low according to the Makefile.PL
* Drop dependancy on Mail::Send for test reporting, use a
fixed version of Test::Reporter instead
* Alias $modobj->name to $modobj->module for more DWIMery
* cpan2dist now allows creation of distributions from local
tarballs as well
* cpan2dist now uses the newly defined dist standard to find
out where distributions were created
* cpan2dist (and CPANPLUS::Dist) plugin detection is now regex
based
* Specifying CPANPLUS object id's when creating fake module
or author objects is now optional
* Small backward-compat hack to make sure old versions of
ExtUtils::AutoInstall keep working with the new CPANPLUS
* Various documentation patches
* Update various bundled modules
Changes for 0.050_03 Fri Dec 17 13:54:48 CET 2004
====================================================
* Move to Module::Pluggable to find CPANPLUS::Dist::*
plugins.
* Make CPANPLUS::Dist::* generate a few required accessors
itself, rather than making all submodules do it themselves
* Rename cpan2dist.pl to cpan2dist to be more 'unixish'
* Improve cpan2dist diagnostics
* Add pod to cpan2dist
* Change config layout for distribution types (incompatible
change -- will require reconfiguration)
* Add 2-way version checking so cpanplus + its config can
both verify if their counterparts are compatible
* Move logic for 'best_path_to_module_build' to Module.pm
* Make logic to detect installed modules follow symlinks
(required for among others, debian)
* 'force install' will try even harder to install a module
if it can, even if it previously failed.
* Make test reports report the version of CPANPLUS, not the
version of the constants file the headers are in.
* Update various bundled modules to their newest versions
* Stringify '$@' to avoid clobbering by sub routine calls
* Various documentation improvements
* Various spelling fixes
* Clean up trailing whitespace from sources
* Add more files to MANIFEST.skip
* Update MANIFEST
Changes for 0.050_02 Fri Dec 10 15:03:39 CET 2004
====================================================
* Move CPANPLUS::Dist::(Deb|Ports) to it's own repository
* Fix error when Test::Reporter is unavaliable
* Various spelling fixes
* Added CPANPLUS::Hacking pod with instructions how to hack on
CPANPLUS
* Added an environment variable 'PERL5_CPANPLUS_IS_RUNNING' which
will be set to the current process id, so subprocesses can
recognize that they are running under CPANPLUS
* Some wordings have changed for the setup, to make things a bit
clearer
* Add 'do we have test::reporter support' probing code (used in
test suite)
* Add Mail::Send as a prerequisite for test::reporter support
* Don't attempt to actually send test reports from our test suite
-- Test::Reporter doesn't do that itself either, we might have
failed tests due to Test::Reporter rather than ourselves
* Mention 'bundle::cpanplus::test::reporter' which has all the
modules needed to have test::reporter support enabled
* Improved accuracy for core module detection logic and errors
* More support for connecting to remote machines using
CPANPLUS::Daemon (not yet released, but will be soon)
* Add extra clean up arguments to our own Makefile to remove temp
files
* Extensive overhaul of CPANPLUS::Dist::Build to get Module::Build
support working properly (lots of workarounds for bugs in the M::B
API -- we now bundle a custom patched M::B (0.26061) to cope)
* Module::Build now accepts buildflags
* Seperate inc path for installers (defacto only Module::Build
right now)
* Update various bundled modules like Object::Accessor, IPC::Cmd,
Archive::Extract.
* Smarter loading of bundled modules
* Various speed optimizations
* 't --force' can send a new test::report now
* Don't force current installer format onto prereqs, unless it's
explicitly requested
* Make the default shell be aware when it's running in noninteractive
mode, making sure it makes no suggestions with require interactivity
* Add a message about where the module was extracted to in verbose mode
Changes for 0.050_1 Fri Dec 3 21:07:12 CET 2004
====================================================
* Initial beta release of CPANPLUS 0.050
* Complete ground up rewrite