Revision history for Asm-X86
2021-06-05 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.50
Fixed some defects found by comparing new test results and GNU as
output. Significant rewrite of the unit tests.
* lib/Asm/X86.pm (is_valid_16bit_addr_intel): checking the sign in
more cases, corrected one regex
* lib/Asm/X86.pm (is_valid_16bit_addr_att): disallow %segreg:var(var)
%segreg:number(number) constructs. Check if %xxx names are registers
* lib/Asm/X86.pm (is_valid_16bit_addr_att, is_valid_32bit_addr_att,
is_valid_64bit_addr_att): check if %xxx names are registers in some
cases
* lib/Asm/X86.pm (is_valid_32bit_addr_att): disallow %esp as the index
register in more cases (following GNU as). Allow 16-bit addressing
in 32-bit mode.
* lib/Asm/X86.pm (is_valid_64bit_addr_att): disallow %rsp and %rip as
the index register in more cases (following GNU as).
* lib/Asm/X86.pm (is_reg_intel, is_reg_att, is_reg8_intel, is_reg8_att,
is_reg16_intel, is_reg16_att, is_segreg_intel, is_segreg_att,
is_reg32_intel, is_reg32_att, is_addressable32_intel,
is_addressable32_att, is_r32_in64_intel, is_r32_in64_att,
is_reg64_intel, is_reg64_att, is_reg_mm_intel, is_reg_mm_att,
is_reg_fpu_intel, is_reg_fpu_att, is_reg_opmask_intel,
is_reg_opmask_att, is_instr_intel, is_instr_att): added a pre-check
to check the syntax of the expression before checking the list
* lib/Asm/X86.pm (is_valid_32bit_addr_att, is_valid_64bit_addr_att):
allow '(, reg)' modes
* lib/Asm/X86.pm (add_percent, remove_duplicates, nopluses): made the
subroutines 'my' and removed them from the manual
* lib/Asm/X86.pm: layout fixes for the POD documentation and man page.
Added information that some of the subroutines work best on input
after all preprocessing.
* Makefile.PL: added a variable with the module name
* MANIFEST, KEY: added the GnuPG key used to sign the module
* t/*.t, Makefile.PL: fixed the interpreter line
* t/*.t: significant re-write of tests - using generating procedures,
arrays and loops
* t/zz_addr_mixed.t: partially merged into zz_addr_att.t and
zz_addr_intel.t with a possibility to extend
* t/zz_regs_mixed.t: merged into zz_regs_att.t and zz_regs_intel.t and
deleted the file
2021-05-09 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.40
Fixed many defects revealed by new unit tests. 100% code is now
covered by unit tests. Updated documentation and metadata.
* lib/Asm/X86.pm (is_valid_16bit_addr_att, is_valid_32bit_addr_att):
fixed accepting invalid addresses: 'zzz(yyy)' and 'zzz(-yyy)',
removed unnecessary conditions
* lib/Asm/X86.pm (is_valid_64bit_addr_intel): allowing valid 64-bit
addressing modes: '[r32]', 'segreg:[r32]', '[segreg:r32]'.
* lib/Asm/X86.pm (is_valid_64bit_addr_att): allowing valid 64-bit
addressing modes with only 32-bit registers.
* lib/Asm/X86.pm (add_att_suffix_instr): added suffixes for 64-bit
instructions
* lib/Asm/X86.pm (conv_intel_addr_to_att): fixed regular expressions
and substitutions
* lib/Asm/X86.pm (conv_att_instr_to_intel): removed unnecessary
conditions
* lib/Asm/X86.pm (conv_intel_instr_to_att): added a missing default
case for instruction suffixes, typo fix, improved changing the
argument order, moved processing MOV[Z/S]X before removing the size
keywords and changing the operand order, added more conditions to
processing MOV[Z/S]X, fixed replacing 'byte', 'word' and similar
size keywords, added 64-bit suffixes
* lib/Asm/X86.pm (is_valid_16bit_addr_att, is_valid_32bit_addr_att,
is_valid_64bit_addr_intel): removed unnecessary conditions
* lib/Asm/X86.pm (is_valid_16bit_addr_intel): added checking the sign
in some cases
* t/*.t: many more unit tests, much more complex and covering 100%
* README: updated the links and copyright
2020-07-19 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.33
* X86.pm: Updated the instruction list from NASM version 2.15.03.
* Makefile.PL: added the minimum Perl version of '5.006' (arbitrarily
chosen based on the version of the Exporter module on my system)
2020-05-20 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.32
Fix some build/distribution errors in the previous version (README,
missing META.*). Added a digital signature.
* Makefile.PL: added detecting the "tar" utility type. In case of
detecting BSD tar (default on some systems), use GNU tar mode.
Added a parameter to sign the package.
* CONTRIBUTING: added, for metacpan.
2020-05-13 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.31
* X86.pm: Updated the instruction list from FASM version 1.73.24.
2019-12-23 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.30
* X86.pm: Updated the instruction list from FASM version 1.73.21.
2019-11-24 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.29
* X86.pm: Updated the instruction list from FASM version 1.73.18.
2019-08-16 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.28
* X86.pm: Updated the instruction list from FASM version 1.73.16.
2019-01-03 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.27
* Makefile.PL: remove hardcoded INSTALLDIRS, allowing it to be set
during the RPM package build or manual installation.
* X86.pm: Updated copyright inside the module.
* README: updated copyright inside the file.
2018-11-18 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.26
* X86.pm: Updated the register and instruction list from NASM version
2.14. Updated copyright inside the module.
* README: updated copyright inside the file.
* Makefile.PL: fixed some rpmlint errors.
2017-05-06 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.25
* X86.pm: Updated the register and instruction list from NASM version
2.13.01. Updated copyright inside the module.
* README: updated copyright inside the file.
2016-03-22 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.24
* X86.pm: Updated the register and instruction list from FASM version
1.71.51 and NASM version 2.12.01. Updated copyright inside the
module.
* README: updated copyright inside the file, quoted module names.
2015-11-01 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.23
* X86.pm: Updated the register and instruction list from FASM version
1.71.46. Updated copyright inside the module.
2014-11-15 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.22
* X86.pm: Updated the register and instruction list from NASM version
2.11.06.
2014-03-01 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.21
* X86.pm: Updated the register and instruction list from NASM version
2.11.02.
2014-01-11 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.20
* X86.pm: Updated the register and instruction list from NASM version
2.11. Added more XMM and YMM registers, added ZMM and opmask
(K[0-7]) registers. Added subroutines to check for opmask registers.
Upgraded tests.
2013-12-07 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.16
* X86.pm: Updated the register list with YMM registers.
2012-09-16 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.15
* X86.pm: Updated the instruction list from NASM version 2.10.05.
2012-07-21 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.14
* X86.pm: Updated the instruction list from NASM version 2.10.02.
2012-03-31 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.13
* X86.pm: Updated the instruction list from NASM version 2.10 and
FASM version 1.69.50. Made is_addressable32_intel,
is_addressable32_att, is_addressable32, is_r32_in64_intel
is_r32_in64_att, is_r32_in64, is_att_suffixed_instr
is_att_suffixed_instr_fpu and add_att_suffix_instr public.
* X86.pm (conv_intel_instr_to_att): corrected removing double percent
character that may be created during the conversion.
* X86.pm (conv_intel_addr_to_att): removing double percent character
that may be created during the conversion.
2012-01-22 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.12
* X86.pm: Removed duplicates from the instruction and mnemonic list.
Fixed the private subroutine add_att_suffix_instr (some AT&T
instructions were not generated). Added one new register, CR8
(available only in 64-bit mode).
* X86.pm, README: Bump the year in the copyright notices.
* README: Update with external dependencies required during manual
installation.
* zz_duplicates.t: a new test to detect duplicate entries in all the
arrays exported by the module.
2011-12-30 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.11:
Updated the instruction and mnemonic list from FASM version 1.69.35.
2010-09-08 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.10:
Updated the instruction list from NASM version 2.09.01.
2010-04-18 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.09:
Updated the instruction list from NASM version 2.08.01. Minor
whitespace changes in the source, for better readability.
2009-07-05 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.08:
Updated the instruction list from NASM version 2.06. Changed one
private procedure's name.
2008-11-09 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.07:
Documentation fixes.
Verified instruction list to be complete with fasm-1.67.28 and
updated it from nasm-2.05.01.
2008-10-24 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.06:
Updated instruction list from fasm-1.67.27. Changed double to
single quotes in one place.
2008-05-18 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.05:
A bit better coding style.
Added the tests to the package.
2008-04-17 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.04:
Added functions checking if the given string represents a register
in AT&T syntax. Renamed the previous functions with an "_intel"
suffix and the new functions with an "_att" suffix. Old
functions (the ones with no suffixes) now check for either Intel
or AT&T syntax, so they remain valid.
Added return value to function descriptions.
Added arrays with AT&T-style register names.
Updated instruction list from the latest FASM source.
Added AT&T-style instruction mnemonic array.
Added functions for checking if a given string represents a
valid 16-/32-/64-bit addressing mode in AT&T syntax.
Renamed the previous functions with an "_intel" suffix and the
new functions with an "_att" suffix. Old functions (the ones
with no suffixes) now check for either Intel or AT&T syntax,
so they remain valid.
Changed Intel syntax addressing analysis to check if the whole given
string is correct (using ^ and $ in regular expressions).
Added functions to convert an addressing mode or instruction (with
all its operands) between AT&T and Intel syntaxes.
Added functions to convert an instruction or memory addressing mode
between Intel and AT&T syntaxes.
Converted subroutine names to prototypes.
Added the compile-once flag where applicable.
Added PRIVATE to documentation of private non-exported subroutines.
2008-03-29 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.03:
Fixed a bug with 64-bit addressing, where valid addresses of the
form [ebx+r10d] were not recognised properly.
Added the "SUPPORT AND DOCUMENTATION" section from the README file
to the module.
2008-03-27 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.02:
Fixed a bug with the 'fs' segment register.
Added a list of segment registers and a function for checking
if a given string represents a segment register.
Added functions for checking if a given string represents a
valid 16-/32-/64-bit addressing mode.
Added a list of FPU registers and a function for checking
if a given string represents an FPU register.
2008-03-08 Bogdan Drozdowski <bogdro@cpan.org>
* Version 0.01:
Includes all known by FASM instruction mnemonics and registers.
Includes functions that check if a given string is a register
(any type or explicit: 8-, 16-, 32-, 64-bit or multimedia) and
functions that check if a given string is a mnemonic.