Revision history for Perl extension RPi::WiringPi.
2.36.1 2017-01-14
- change versioning. The X.XX portion represents which version of
WiringPi::API and wiringPi we're compatible with
- cleaned up some tests due to previous changes
- added BMP180.pm module and all functionality of the barometric
pressure sensor per WiringPi::API
1.02 2017-01-13
- incorporated shift registers after adding to WiringPi::API
- added shift_register()
- updated documentation (POD and Tutorial)
1.01 2016-08-27
- no functional changes
- POD fixes, updates and clarifications (thanks 'jmlynesjr' from
PerlMonks for assisting)
1.00 2016-08-24
- SYS mode has been disabled and hidden until the PWM and interrupt
functionality can be sorted out for that mode
- cleaned up manual test help info as to be accurate
- POD editing
- test cleanup (all standard unit tests skip if not on a Pi)
- all manual tests pass (interrupts are a bit iffy still)
- bumped prereq of WiringPi::API to 1.04
0.99_06 2016-08-22
- POD cleanup
- cleanup() added, puts each registered pin in INPUT mode, and disables
PUD if set
- re-added register_pin(), we no longer keep track of objects, just the
GPIO scheme numbers for cleanup and error checking
- removed unregister_pin()
- we now die() if trying to use a pin that is already in use
- removed Interrupt::unset()
- removed Pin::unset_interrupt()
- software PWM is now implemented, but disabled due to issues yet to be
solved
- removed Board.pm from the distribution. The methods it used to handle
are now located directly in WiringPi.pm
- we now check for duplicate pins in $pi->pin() and in register_pin()
- added test for duplicate pin registration
- added system setup information in FAQ
0.99_05 2016-08-18
- added Util::_sys_mode() to determine if we need wrappers for certain
calls or not
- changed back to the default setup() call instead of setup_sys(), as
a lot of wrapping needs to be done (such as in pin_mode() and pwm())
to make things work properly
- fixed calls to _sys_mode() in new(). Didn't have the _ prefix
- we now check if something else has called a setup() routine
- new env var, RPI_SCHEME, set when a setup routine is called so that
if it's called twice, we'll know and be able to carry on
- added new RPI_MODE_* constants that contain pin modes. This replaces
_sys_mode() (removed) and cleans up other logic
- renamed gpio_map() and gpio_scheme() to pin_map() and pin_scheme()
respectively
- added CLI binary "pinmap", prints out pin mappings
- fixed return issue in pin_map()
- Pin: pwm() and pull() have been updated to work in setup_sys() mode
- Pin: pull() now automatically sets the pin into INPUT mode()
- we now default to SYS mode (ie. non-root) (documentation enhanced)
- when creating a new pin object in SYS mode, we now export() the pin
in new()
- rewrote register_pin() and unregister_pin(). They both translate the
pin number to GPIO no matter the scheme, then unexport() it
- added manual tests for all four modes in test/*
- slight edits in FAQ/Tutorial
- bumped req RPi::WiringPi::Constant to 0.02
- bumped req WiringPi::API to 1.03
0.99_04 2016-08-16
- added Tutorial/FAQ
0.99_02 2016-08-16
- bumped sub module versions so they'd show up on the CPAN
- began adding more elaborate tests
0.99_01 2016-08-16
- feature freeze. All work until 1.00 will be spent writing tests for
everything and ensuring documentation is accurate
- added Interrupt.pm, added associated methods in both WiringPi
and Pin
- Core::setup_sys() now exports all pins automatically with sudo. This
setup method is now the default if none is specified in new(),
meaning that by default, we now use the BCM pin numbering scheme
- renamed RPi::WiringPi::Core to WiringPi::API
- cleaned up code in Interrupt to deal with the much improved way we
now handle interrupts
- added pin_to_gpio() to Util, returns the BCM representation of a pin
number no matter what scheme is in use
- added interrupt_set() and interrupt_unset() to Pin
0.05 2016-08-13
- renamed WiringPi::pin_map() to gpio_scheme()
- added WiringPi::gpio_map()
- new()'s setup param now accepts 'none', allowing us to pypass the
wiringPi's initialization
- new Util.pm, moved all utility methods from WiringPi to Util.
WiringPi now only handles SIGs and component objects
- moved all param checking from Core into the respective modules here
to keep Core as close to the C code as possible
0.04 2016-08-11
- added LCD.pm module, for interfacing with LCD displays, along with
a massive update to Core
- changed LED::init() to just pass along the args hash, and let Core
deal with any issues
0.03 2016-08-11
- wrote RPi::WiringPi::Constant as a standalone module
- added $SIG{__DIE__} handler so we can clean up properly on die()
- added 'fatal_exit' new() param for testing
- we now catch $SIG{INT} as well, with a test
- new method pin_map(), returns the current pin mapping
- tests now work on non-Pi boards (if wiringPi lib is installed)
- implemented
- added Board.pm with methods rev(), wpi_to_gpio(), phys_to_gpio() and
pwm_range()
0.02 2016-08-10
- implemented getAlt() in Core, and in Pin, mode() with no params
now returns the current mode of the pin
- added cleanup()
0.01 2016-08-10
- initial prototype release
- added Pin.pm
- added error checking
- first round of tests
- NO_BOARD env var