NAME
Physics::Ellipsometry::VASE::Anisotropy - Anisotropic optical models and 4×4 Berreman transfer matrix
SYNOPSIS
use PDL;
use Physics::Ellipsometry::VASE::Anisotropy qw(
uniaxial_epsilon biaxial_epsilon tensor_epsilon berreman_4x4
);
my $lambda = sequence(100) * 10 + 300;
# Uniaxial crystal (e.g., sapphire, quartz, TiO2 rutile)
my $eps_o = pdl(3.1) + i() * pdl(0.0); # ordinary
my $eps_e = pdl(3.4) + i() * pdl(0.0); # extraordinary
my $tensor = uniaxial_epsilon($eps_o, $eps_e, theta => 45);
# Compute Psi/Delta for anisotropic film
my $result = berreman_4x4($lambda, 70, $tensor, 100,
1.0, pdl(3.94)+i()*pdl(0.02));
my $psi = $result->{psi};
my $delta = $result->{delta};
DESCRIPTION
This module provides tools for modeling optically anisotropic thin films where the dielectric response depends on the direction of the electric field. In isotropic media, the permittivity is a scalar; in anisotropic media it becomes a 3×3 tensor:
D = epsilon_0 * epsilon_tensor * E
The module supports three levels of anisotropy:
- Uniaxial - Two independent constants (ordinary and extraordinary). The material has one optic axis. Examples: sapphire, quartz, TiO2, calcite, liquid crystals.
- Biaxial - Three independent constants along three principal axes. Examples: mica, aragonite, orthorhombic crystals, organic films.
- General tensor - Arbitrary 3×3 complex tensor with off-diagonal elements. Required for magneto-optic materials, tilted crystals, or materials under stress.
The Berreman 4×4 formalism extends the standard 2×2 transfer matrix to handle anisotropic layers. Instead of treating s- and p-polarizations independently, it uses a 4-component field vector [Ex, Hy, Ey, -Hx] and 4×4 transfer matrices. This naturally handles polarization conversion (rps, rsp ≠ 0) that occurs in anisotropic systems.
FUNCTIONS
uniaxial_epsilon
my $tensor = uniaxial_epsilon($eps_ordinary, $eps_extraordinary,
theta => $tilt_deg,
phi => $azimuth_deg);
Constructs the dielectric tensor for a uniaxial crystal. In the principal frame:
epsilon = diag(eps_o, eps_o, eps_e)
Optional rotation parameters tilt the optic axis (c-axis) away from the surface normal:
theta- tilt angle of c-axis from surface normal [deg] (default 0)phi- azimuthal rotation about surface normal [deg] (default 0)
Returns a hashref {xx, yy, zz, xy, xz, yz} representing the tensor in the laboratory frame.
# TiO2 rutile, c-axis perpendicular to surface
my $t = uniaxial_epsilon(pdl(6.0)+i()*0, pdl(8.4)+i()*0);
# Same crystal, c-axis tilted 30° from normal
my $t = uniaxial_epsilon(pdl(6.0)+i()*0, pdl(8.4)+i()*0, theta=>30);
biaxial_epsilon
my $tensor = biaxial_epsilon($eps_x, $eps_y, $eps_z,
phi => $phi, theta => $theta, psi => $psi);
Constructs the dielectric tensor for a biaxial crystal with three distinct principal values. Optional ZYZ Euler angles rotate from the crystal frame to the laboratory frame.
# Mica (orthorhombic)
my $t = biaxial_epsilon(
pdl(2.56)+i()*0, # eps_x
pdl(2.62)+i()*0, # eps_y
pdl(2.60)+i()*0, # eps_z
);
tensor_epsilon
my $tensor = tensor_epsilon(
xx => $exx, yy => $eyy, zz => $ezz,
xy => $exy, xz => $exz, yz => $eyz,
);
Constructs a general 3×3 dielectric tensor from explicit components. Off-diagonal elements enable modeling of magneto-optic effects, chirality, or non-reciprocal media. The tensor is assumed symmetric unless separate yx, zx, zy components are provided.
berreman_4x4
my $result = berreman_4x4($lambda_nm, $theta_deg,
$eps_tensor, $d_nm,
$N_ambient, $N_substrate);
Calculates the reflection of a single anisotropic layer on an isotropic substrate using the 4×4 Berreman transfer matrix method.
Returns: hashref with keys:
rpp- p-to-p reflection coefficient (complex PDL)rss- s-to-s reflection coefficient (complex PDL)rps- s-to-p cross-polarization (complex PDL)rsp- p-to-s cross-polarization (complex PDL)psi- standard ellipsometric Ψ [degrees]delta- standard ellipsometric Δ [degrees]
Example — liquid crystal cell:
my $lambda = sequence(200) * 5 + 400;
my $eps_o = pdl(2.25) + i()*pdl(0);
my $eps_e = pdl(3.06) + i()*pdl(0);
# LC director tilted 45° from normal
my $tensor = uniaxial_epsilon($eps_o, $eps_e, theta => 45);
my $r = berreman_4x4($lambda, 60, $tensor, 5000,
1.0, pdl(1.52)+i()*pdl(0));
printf "Psi at 600nm: %.2f deg\n", $r->{psi}->at(40);
printf "Cross-pol |rps| at 600nm: %.4f\n", abs($r->{rps})->at(40);
SEE ALSO
Physics::Ellipsometry::VASE::TMM, Physics::Ellipsometry::VASE::MagnetoOptic, Physics::Ellipsometry::VASE::Dispersion
M. Schubert, "Polarization-dependent optical parameters of arbitrarily anisotropic homogeneous layered systems", Phys. Rev. B 53, 4265 (1996).
D.W. Berreman, "Optics in Stratified and Anisotropic Media: 4×4-Matrix Formulation", J. Opt. Soc. Am. 62, 502 (1972).