NAME
Physics::Ellipsometry::VASE::MagnetoOptic - Magneto-optic Kerr effect (MOKE) models for spectroscopic ellipsometry
SYNOPSIS
use PDL;
use Physics::Ellipsometry::VASE::MagnetoOptic qw(
magneto_optic_tensor kerr_rotation
);
my $lambda = sequence(100) * 10 + 400;
# Construct MO dielectric tensor for a ferromagnet
my $eps_d = pdl(-13.8) + i()*pdl(15.7); # diagonal (Fe at 633nm)
my $eps_od = pdl(0.74) + i()*pdl(0.21); # off-diagonal (Q*N)
my $tensor = magneto_optic_tensor($eps_d, $eps_od,
geometry => 'polar');
# Kerr rotation from a semi-infinite magnetic layer
my ($theta_K, $eta_K) = kerr_rotation($lambda, 65,
eps_diag => pdl(-13.8)+i()*pdl(15.7),
Q => pdl(0.04)+i()*pdl(0.006),
geometry => 'polar',
);
DESCRIPTION
The magneto-optic Kerr effect (MOKE) describes the change in polarization state of light upon reflection from a magnetized material. It is widely used for magnetic thin film characterization and has three geometries:
- Polar MOKE - Magnetization perpendicular to the surface (along z). Produces Kerr rotation in the reflected beam for both s- and p-polarized light. Typically the largest signal.
- Longitudinal MOKE - Magnetization in the surface plane, within the plane of incidence (along x). Produces rotation proportional to cos(θ).
- Transverse MOKE - Magnetization in the surface plane, perpendicular to the plane of incidence (along y). Changes only the p-polarized reflectance amplitude (no rotation; changes Δ only).
The magneto-optic response is described by the Voigt parameter Q, which quantifies the ratio of off-diagonal to diagonal permittivity:
epsilon_xy = i * Q * epsilon_xx
The full dielectric tensor for polar geometry:
⎡ ε_xx iQε 0 ⎤
ε = ⎢-iQε ε_yy 0 ⎥
⎣ 0 0 ε_zz ⎦
For longitudinal geometry, the off-diagonal elements appear in the xz and zx positions.
FUNCTIONS
magneto_optic_tensor
my $tensor = magneto_optic_tensor($eps_diag, $eps_offdiag,
geometry => 'polar');
Constructs the 3×3 dielectric tensor with magneto-optic off-diagonal elements.
Parameters:
$eps_diag- diagonal permittivity component(s) (complex PDL or scalar)$eps_offdiag- off-diagonal permittivity (= i*Q*eps_diag for polar)geometry- 'polar', 'longitudinal', or 'transverse'
Returns: hashref {xx, yy, zz, xy, xz, yz} suitable for use with berreman_4x4.
# Fe at 633 nm (polar magnetization)
my $t = magneto_optic_tensor(
pdl(-13.8) + i()*pdl(15.7),
pdl(0.74) + i()*pdl(0.21),
geometry => 'polar',
);
# $t->{xy} contains the off-diagonal element
kerr_rotation
my ($theta_K, $eta_K) = kerr_rotation($lambda_nm, $theta_deg, %params);
Calculates the complex Kerr angle (rotation + ellipticity) for reflection from a semi-infinite magnetized medium.
For polar MOKE at oblique incidence:
θ_K + i*η_K = -i * Q * N * cos(θ_t)
/ ((ε - 1) * cos(θ_m))
where θ_t is the refraction angle inside the medium and θ_m depends on the geometry.
Parameters:
eps_diag- diagonal dielectric constant (complex)Q- Voigt magneto-optic parameter (complex)geometry- 'polar' (default), 'longitudinal', or 'transverse'
Returns: two PDL piddles:
Example — spectral Kerr rotation of iron:
use Physics::Ellipsometry::VASE::MagnetoOptic qw(kerr_rotation);
my $lambda = sequence(50) * 20 + 400; # 400-1380 nm
# Fe optical and MO constants (energy-dependent)
my $E = 1240.0 / $lambda; # eV
my $eps = pdl(-13.8) + i()*pdl(15.7); # simplified constant
my $Q = pdl(0.04) + i()*pdl(0.006);
my ($theta, $eta) = kerr_rotation($lambda, 0,
eps_diag => $eps,
Q => $Q,
geometry => 'polar',
);
printf "Kerr rotation at 633nm: %.1f mdeg\n", $theta->at(11);
printf "Kerr ellipticity at 633nm: %.1f mdeg\n", $eta->at(11);
NOTES
Kerr rotation angles are typically small (0.01-1°), requiring sensitive detection (modulation techniques, lock-in amplifiers).
For multilayer magnetic structures, combine with "berreman_4x4" in Physics::Ellipsometry::VASE::Anisotropy using the tensor from
magneto_optic_tensor.Typical Voigt parameters: Fe Q≈0.04, Co Q≈0.05, Ni Q≈0.02 at visible wavelengths.
SEE ALSO
Physics::Ellipsometry::VASE::Anisotropy, Physics::Ellipsometry::VASE::TMM
P.M. Oppeneer, "Magneto-optical Kerr spectra", Handbook of Magnetic Materials 13, 229 (2001).
Z.Q. Qiu and S.D. Bader, "Surface magneto-optic Kerr effect", Rev. Sci. Instrum. 71, 1243 (2000).