/ 
Chart-Plotly-0.042
River stage one • 2 direct dependents • 2 total dependents
/ Chart::Plotly::Trace::Scattersmith

NAME

Chart::Plotly::Trace::Scattersmith - The scattersmith trace type encompasses line charts, scatter charts, text charts, and bubble charts in smith coordinates. The data visualized as scatter point or lines is set in `real` and `imag` (imaginary) coordinates Text (appearing either on the chart or on hover only) is via `text`. Bubble charts are achieved by setting `marker.size` and/or `marker.color` to numerical arrays.

VERSION

version 0.042

SYNOPSIS

use Chart::Plotly;
use Chart::Plotly::Plot;
use Chart::Plotly::Trace::Scattersmith;

my $smith = Chart::Plotly::Trace::Scattersmith->new(imag=>[0.5, 1, 2, 3], real=>[0.5, 1, 2, 3]);
my $plot = Chart::Plotly::Plot->new(traces => [$smith]);

Chart::Plotly::show_plot($plot);

DESCRIPTION

The scattersmith trace type encompasses line charts, scatter charts, text charts, and bubble charts in smith coordinates. The data visualized as scatter point or lines is set in `real` and `imag` (imaginary) coordinates Text (appearing either on the chart or on hover only) is via `text`. Bubble charts are achieved by setting `marker.size` and/or `marker.color` to numerical arrays.

Screenshot of the above example:

Screenshot of the above example

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#scattersmith

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

type

Trace type.

ATTRIBUTES

  • cliponaxis

    Determines whether or not markers and text nodes are clipped about the subplot axes. To show markers and text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*.

  • connectgaps

    Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

  • customdata

    Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, *scatter* traces also appends customdata items in the markers DOM elements

  • customdatasrc

    Sets the source reference on Chart Studio Cloud for `customdata`.

  • fill

    Sets the area to fill with a solid color. Use with `fillcolor` if not *none*. scattersmith has a subset of the options available to scatter. *toself* connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape. *tonext* fills the space between two traces if one completely encloses the other (eg consecutive contour lines), and behaves like *toself* if there is no trace before it. *tonext* should not be used if one trace does not enclose the other.

  • fillcolor

    Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

  • hoverinfo

    Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

  • hoverinfosrc

    Sets the source reference on Chart Studio Cloud for `hoverinfo`.

  • hoverlabel

  • hoveron

    Do the hover effects highlight individual points (markers or line points) or do they highlight filled regions? If the fill is *toself* or *tonext* and there are no markers or text, then the default is *fills*, otherwise it is *points*.

  • hovertemplate

    Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, *xother* will be added to those with different x positions from the first point. An underscore before or after *(x|y)other* will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

  • hovertemplatesrc

    Sets the source reference on Chart Studio Cloud for `hovertemplate`.

  • hovertext

    Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a *text* flag.

  • hovertextsrc

    Sets the source reference on Chart Studio Cloud for `hovertext`.

  • ids

    Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • idssrc

    Sets the source reference on Chart Studio Cloud for `ids`.

  • imag

    Sets the imaginary component of the data, in units of normalized impedance such that real=1, imag=0 is the center of the chart.

  • imagsrc

    Sets the source reference on Chart Studio Cloud for `imag`.

  • legendgroup

    Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

  • legendgrouptitle

  • legendrank

    Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `*reversed* `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.

  • line

  • marker

  • pmeta

    Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

  • metasrc

    Sets the source reference on Chart Studio Cloud for `meta`.

  • mode

    Determines the drawing mode for this scatter trace. If the provided `mode` includes *text* then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is *lines+markers*. Otherwise, *lines*.

  • name

    Sets the trace name. The trace name appear as the legend item and on hover.

  • opacity

    Sets the opacity of the trace.

  • real

    Sets the real component of the data, in units of normalized impedance such that real=1, imag=0 is the center of the chart.

  • realsrc

    Sets the source reference on Chart Studio Cloud for `real`.

  • selected

  • selectedpoints

    Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

  • showlegend

    Determines whether or not an item corresponding to this trace is shown in the legend.

  • stream

  • subplot

    Sets a reference between this trace's data coordinates and a smith subplot. If *smith* (the default value), the data refer to `layout.smith`. If *smith2*, the data refer to `layout.smith2`, and so on.

  • text

    Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a *text* flag and *hovertext* is not set, these elements will be seen in the hover labels.

  • textfont

  • textposition

    Sets the positions of the `text` elements with respects to the (x,y) coordinates.

  • textpositionsrc

    Sets the source reference on Chart Studio Cloud for `textposition`.

  • textsrc

    Sets the source reference on Chart Studio Cloud for `text`.

  • texttemplate

    Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variables `real`, `imag` and `text`.

  • texttemplatesrc

    Sets the source reference on Chart Studio Cloud for `texttemplate`.

  • transforms

  • uid

    Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

  • uirevision

    Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

  • unselected

  • visible

    Determines whether or not this trace is visible. If *legendonly*, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2022 by Pablo Rodríguez González.

This is free software, licensed under:

The MIT (X11) License