NAME

Linux::CDROM - Perl extension for accessing the CDROM-drive on Linux

SYNOPSIS

use Linux::CDROM;

my $cd = Linux::CDROM->new("/dev/cdrom") or die $Linux::CDROM::error;

$cd->play_ti( -from => 1, -to => 3 );

while ((my $p = $cd->poll)->status == CDROM_AUDIO_PLAY) {
    my $track = $p->track;
    my ($min, $sec) = $p->rel_addr;
    print "Playing track $track at $min:$sec\n";
}

DESCRIPTION

This module gives you access to your CDROM drive as granted by your kernel. You can use it for playing audio, grabbing the content off the CD in various formats etc.

Unless otherwise stated, all methods return an undefined value to indicate an error. You can then check the content of $! to see what went wrong. Please also see "ERROR REPORTING" that explains how to work with $Linux::CDROM::error.

Each method states which ioctl it implements. This should help people familiar with the various ioctls of the CDROM-drive to find their way around.

You should probably start with reading Linux::CDROM::Cookbook. It explains and exemplifies the concepts behind this module. After that you can return to this document as a reference for the countless methods and objects it provides.

METHODS FOR Linux::CDROM

The top-level object is always a Linux::CDROM. The object is created per-drive so you can have as many of these objects at the same time as you have CDROM-drives.

new(device)

Creates a new Linux::CDROM instance. device is the string pointing to your drive, such as "/dev/cdrom" or "/dev/hdd". This method does a non-blocking read-only open of the device. If opening the device was successfull, it ultimately does a CDROM_GET_CAPABILITY ioctl to check whether the device is in fact a CDROM drive.

Returns undef and sets $! if something goes wrong. You should check $Linux::CDROM::error in such a case to distinguish between the above two cases (device couldn't be opened at all or device could be opened but is not a CDROM drive):
```
my $cd = Linux::CDROM->new("/dev/hdc") or die $Linux::CDROM::error;
```
Please note that the constructor opens your CDROM-drive and not the disc inside it. That means that you do not really need a disc inside your drive to open it. You only need one when you intend to carry out operations relating to a disc, such as playing audio, grabbing data, etc.

Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR, LINUX_CDROM_NO_OPEN or LINUX_CDROM_NO_CDROM.
close

Shuts down the link from your program to the CDROM-drive by doing a close(2). This does not destroy your object but quite naturally any subsequent operation on it will fail.

You can use this to temporarily release your drive and at some other point reopen it using reopen.

Returns a true value on success, undef otherwise.

reopen

Reopens your drive after it has been shut-down using close:

$cd->close;
# now your CDROM is released and now interference with any
# other application accessing the drive can happen
...
$cd->reopen;
# continue with normal operation

Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR or LINUX_CDROM_NO_OPEN.

capabilities

Returns the capabilities of this drive as an integer by issuing the CDROM_GET_CAPABILITY ioctl. This integer is the bit-wise ORing of the various capability-flags:
```
# checks whether drive can play audio and has programmable speed
if ($cd->capabilities & (CDC_PLAY_AUDIO | CDC_SELECT_SPEED)) {
    ...
}
```
The available flags:

CDC_CLOSE_TRAY

Drive can close tray.

CDC_OPEN_TRAY

Drive can open tray.

CDC_LOCK

Drive is locked.

CDC_SELECT_SPEED

Drive has programmable speed.

CDC_SELECT_DISC

Drive is a juke-box.

CDC_MULTI_SESSIONS

Drive can read multi-session discs.

CDC_MCN

Drive can read medium-catalog-number.

CDC_MEDIA_CHANGED

Drive reports on changed media.

CDC_PLAY_AUDIO

Drive can play audio.

CDC_RESET

Drive can be reset.

CDC_IOCTLS

Drive has non-standard ioctls.

CDC_DRIVE_STATUS

Drive can report its status.

CDC_GENERIC_PACKET

Drive can be further controlled through generic packet commands.

CDC_CD_R

Drive can write CD-Rs.

CDC_CD_RW

Drive can write CD-RWs.

CDC_DVD

Drive can read DVDs.

CDC_DVD_R

Drive can write DVD-Rs.

CDC_DVD_RW

Drive can write DVD_RWs.
drive_status

Returns the current drive-status as an integer by issuing the CDROM_DRIVE_STATUS ioctl. This integer is the bit-wise ORing of the various status-flags:
```
if ($cd->drive_status & CDS_TRAY_OPEN) {
    print "Please close the tray of your drive.";
}
```
The available flags:

CDS_NO_INFO

Drive doesn't return any info.

CDS_NO_DISC

There is no disc in the drive.

CDS_TRAY_OPEN

CDS_DRIVE_NOT_READY

CDS_DISC_OK
disc_status

Returns the current disc-status as an integer by issuing the CDROM_DISC_STATUS ioctl. Quite naturally, you need to have a disc inside your drive:
```
if ($cd->disc_status == CDS_AUDIO) {
    print "Disc is an audio CD";
}
```
The possible return-values:

CDS_AUDIO

Audio CD (red book).

CDS_DATA_1

Yellow book form 1.

CDS_DATA_2

Yellow book form 2.

CDS_XA_2_1

Green book form 1.

CDS_XA_2_2

Green book form 2.

CDS_MIXED

Often used for CDs of games. One track is data, and some other tracks are Audio.
num_frames

Returns the total number of frames on the CD (CDROM_LAST_WRITTEN ioctl).
next_writable

Returns the index of the next writable frame of the CD (CDROM_NEXT_WRITABLE ioctl).
get_spindown

Returns the spindown time of your CDROM drive (CDROMGETSPINDOWN ioctl).
set_spindown(val)

Sets the spindown time of your drive to val which should be between 0 and 255. Your drive may not support this.

reset

Tries to hard-reset the drive by issuing the CDROMRESET ioctl:

if ($cd->reset) {
    print "reset ok";
} else {
    print "reset failed: $!;
}

eject

Eject the CD from the drive (CDROMEJECT ioctl).
auto_eject(0|1)

Turns on/off auto-ejecting of your drive (CDROMEJECT_SW ioctl). Auto-eject means the disc is ejected when the drive is shut down.

Auto-ejecting can be disabled again with $cd->auto_eject(0).
close_tray

Closes the tray of the drive if possible (CDROMCLOSETRAY ioctl).
lock_door(0|1)

Locks (1) or unlocks (0) the door of the drive (CDROM_LOCKDOOR ioctl).

Be aware that you can no longer open the tray of your drive when you locked your drive and your program ends before you've done a $cd->lock_door(0).

Of course, this might be what you want if you want to prevent your kid from accessing the CDs with your downloaded porn-collection.
media_changed

Returns a true value if the disc inside the drive has been changed ever since you opened the drive. False otherwise, undef on errors (CDROM_MEDIA_CHANGED ioctl).
mcn

Returns the medium catalog number of the CD. (CDROM_GET_MCN ioctl, formerly CDROM_GET_UPC).
get_vol

Returns a list with four items being the volume of channel 0 throughout channel 3 (CDROMVOLREAD ioctl).
set_vol(ch0, ch1, ch2, ch3)

Sets the volume of the four channels to the respective values of ch0 to ch3 (CDROMVOLCTRL ioctl). The values must be between 0 and 255.

As always, returns a true value on success, undef otherwise (check $! in this case).
play_msf(addr1, addr2)

Plays the audio on the CD starting at addr1 and ending with addr2 by issuing the CDROMPLAYMSF ioctl. Both parameters must be instances of Linux::CDROM::Addr:
```
# start with frame 1
my $addr1 = Linux::CDROM::Addr->new(CDROM_LBA, 1);
# end at 2 minutes, 2 seconds, first frame 
my $addr2 = Linux::CDROM::Addr->new(CDROM_MSF, 2, 2, 1);

if ( $cd->play_msf($addr1, $addr2) ) {
    print "ok, will play";
} else {
    print "Can't play: $!";
}
```
Note that any flavour (either CDROM_LBA or CDROM_MSF) of a Linux::CDROM::Addr object will do. See METHODS FOR Linux::CDROM::Addr.

Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR, LINUX_CDROM_NO_DISC_STATUS, LINUX_CDROM_NO_AUDIO or LINUX_CDROM_IOCTL_ERROR.
play_ti(-from => start, -to => end, [ -fromidx => startidx, -toidx => endidx ])

Plays the audio on a CD starting with track start up to (and including) end. The arguments startidx and endidx are optional and refer to an offset in the start and end track respectively. It must be a value between 0 and 255.

If called with no arguments at all, it plays the whole CD.

Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR, LINUX_CDROM_NO_DISC_STATUS, LINUX_CDROM_NO_AUDIO, LINUX_CDROM_NO_TOCHDR or LINUX_CDROM_IOCTL_ERROR.
pause

Pauses playback of your CD (CDROMPAUSE ioctl).
resume

Resumes playback of your CD (CDROMRESUME ioctl).
start

Starts the CDROM drive (CDROMSTART ioctl).
stop

Stops the CDROM drive (CDROMSTOP ioctl). This can be used to stop audio playback.
read1(addr)

Reads the frame at address addr which must be a Linux::CDROM::Addr object and returns the data as one string (CDROMREADMODE1 ioctl).

The returned string is always 2048 bytes long or undef in case of errors.

See also Linux::CDROM::Cookbook, Recipe 9 to find out how to make ISOs from your CD.
read2(addr)

Reads the frame at address addr which must be a Linux::CDROM::Addr object and returns the data as one string (CDROMREADMODE2 ioctl). This assumes that the CD in the drive is in the Yellow Book Form 2 format.

The returned string is always 2336 bytes long or undef in case of errors.
read_audio(addr, nframes)

Treats the CD as an Audio-CD (Red Book) and reads nframes beginning at the address addr (CDROMREADAUDIO ioctl). addr must be a Linux::CDROM::Addr object.

It returns the data as one string or undef in case of errors.

This can be used to grab an Audio-CD. See Recipe 8 in Linux::CDROM::Cookbook on how to do it the right way.

This method partially implements the upper bound checking not yet done by the kernel (as of 2.4.21). The case that the start-address addr is bigger than the number of frames on the CD is detected. If addr is smaller but nframes would cause reading beyond the last frame, no error is returned. Instead, the method will read the data up to the last frame and return it.

Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR or DEVICE_IDX_OUT_OF_BOUNDS.

See also Linux::CDROM::Cookbook and the entries on get_datasize and reset_datasize.
read_raw(addr)

Reads the frame at address addr in raw mode. addr must be a <Linux::CDROM::Addr> object.
reset_datasize

Resets the internal counter of bytes read managed by a Linux::CDROM drive. This counter only counts bytes produced by read_audio.
get_datasize

Returns the value of the internal counter of bytes read.

The existance of reset_datasize and get_datasize is purely for convenience reason. It will save you from counting the number of bytes yourself. Also, it is more efficient doing it this way.

Usage is simple:
```
$cd->reset_datasize;

# now read some audio 
$data = $cd->read_audio(...);
...

my $bytes = $cd->get_datasize;
```
poll

This queries the current state of the CDROM-drive by issuing the CDROMSUBCHNL ioctl. It returns an Linux::CDROM::Subchannel object.

You will need this method if you want to write a CD-player that updates its output accordingly to what it currently does. For instance, you can use it to find out at which minute/second/frame the drive currently is at:
```
$| = 1; # turn on auto-flush

my $cd = Linux::CDROM->new("/dev/cdrom") or die $Linux::CDROM::error;
$cd->play_ti( -from => 1, -to => 3 );

while (my $poll = $cd->poll) {
    last if $poll->status != CDROM_AUDIO_PLAY;
    printf "\r%02i:%02i:%02i [min:sec:frame]", $poll->abs_addr->as_msf;
    select undef, undef, undef, 0.2; # sleep around 0.2 secs
}
```
This method only makes sense for Audio-CD.
toc

Reads the TOC-header of the inserted CD (CDROMREADTOCHDR ioctl). It returns a list with two items. The first element being the start-track (most often this will be 1) and the second item being the index of the last track.

This is the ultra-correct way of finding the number of tracks on a CD:
```
my ($first, $last) = $cd->toc;
my $num_tracks = $last - $first + 1;
```
toc_entry(track)

Reads the TOC-entry of track track and returns it as a Linux::CDROM::TocEntry object by issuing the CDROMREADTOCENTRY ioctl.

You will need this method when you want to find out the offset of a particular track on a disc or when trying to figure out whether a track is data or audio:
```
my $entry = $cd->toc_entry(2);
print "Track 2 is ", $entry->is_data ? "data\n" : "audio\n";
printf "Offset: %02i:%02i:%02i\n", $entry->addr->as_msf;
```
Sets $Linux::CDROM::error to one of LINUX_CDROM_NO_ERROR, LINUX_CDROM_NO_TOCHDR, LINUX_CDROM_IDX_OUT_OF_BOUNDS or LINUX_CDROM_IOCTL_ERROR.
is_multisession

Returns a true value if the inserted CD is a multisession CD. False if not or undef when some error occured (CDROMMULTISESSION ioctl).

METHODS FOR Linux::CDROM::Addr

Specifying positions on a CD always happens through Linux::CDROM::Addr objects. There are two addressing modes that can be easily transformed into each other so you can use whichever mode of addressing you prefer:

MSF

This stands for Minute/Second/Frame and you specify a position on the CD by providing these three values. This is probably the more natural addressing for Audio-CDs. One second consists of CD_FRAMES frames. This value is currently 75.
LBA

This stands for Logical Block Addressing. You specify a position by providing the frame number which starts at 0. Next frame is 1 etc. This is what makes it so logical.

This class overloads '+' and '-' so you may simply add or substract addresses. Here's how to figure out the length of a track on a CD in number of frames:

my $entry1 = $cd->toc_entry(2);
my $entry2 = $cd->toc_entry(3);

my $length  = ($entry2->addr - $entry1->addr)->lba;

new(CDROM_MSF, minute, second, frame)
new(CDROM_LBA, frame)

Creates a new Linux::CDROM::Addr instance in one of the two addressings. Note that internally addressing always happens through LBA.

Note how MSF can be transformed into LBA easily:
```
my $lba = ($minute * CD_SECS + $seconds) * CD_FRAMES + $frames;
```
But you don't have to do that manually. This class provides the appropriate conversion routines.
frame

Returns the frame of this address. This is not the absolute frame but the frame in the range of 0 and 74 according to MSF addressing.
second

Returns the second of this address. This is not the absolute second but the second according to MSF addressing (in the range 0 and 59).
minute

Returns the minute of this address.
as_lba

Returns the absolete frame number.
as_msf

Returns the address broken into minute, second and frame as a list of three values.

METHODS FOR Linux::CDROM::TocEntry

This kind of object is returned by Linux::CDROM::toc_entry(num). It represents one track on the CD. There is no separate constructor for these objects.

addr

Returns the position of this track on the disc as a Linux::CDROM::Addr object.
is_data

Returns a true value if this track is a data track.
is_audio

Returns a true value if this track is an audio track.

METHODS FOR Linux::CDROM::Subchannel

These objects represent the state of your drive in the moment you call $cd->poll. Some operations (most notably playing Audio) on the drive are non-blocking and your program therefore continues with the execution while your drive is busy carrying out the desired operation. You can now ask the drive what it is currently doing in a tight loop. The information your drives returns to you are Linux::CDROM::Subchannel objects.

status

The basic status of your drive. It returns one of the following values:
- CDROM_AUDIO_INVALID
  
  Audio status not supported.
- CDROM_AUDIO_PLAY
  
  Your drive is right now busy playing back an Audio track.
- CDROM_AUDIO_PAUSED
  
  Audio playback is paused. You can use $cd->resume to continue it.
- CDROM_AUDIO_COMPLETED
  
  Audio playback successfully completed.
- CDROM_AUDIO_ERROR
  
  Audio playback stopped due to an error.
- CDROM_AUDIO_NO_STATUS
  
  No current audio status to return.
abs_addr

Returns a Linux::CDROM::Addr object representing the absolute position where your drive is currently playing audio.
rel_addr

Returns a Linux::CDROM::Addr object representing the relative position (relative to the current track) where your drive is playing audio.
track

The current track your drive is playing back.
index

Yet another positional information. Returns an offset within the currently playing track, probably in the range of 0 and 255.

METHODS FOR Linux::CDROM::Format

This class offers some utility methods that are useful when working with CDROMs on a low level. All methods are class-methods so there is no object here.

wav_header(bytes)

This returns a WAV header suitable for bytes audio data. If you put this at the end of a file and stuff the data as returned by Linux::CDROM::read_audio behind it, you'll get a valid WAV file that can be played back by any sane wave-player:
```
# create a header for 30 million bytes of data
my $header = Linux::CDROM::Format->wav_header( 30_000_000 );
print WAVFILE $header;
print WAVFILE $data;
```
The header specifies that the data will have a sample-rate of 44100Hz, 16 bit resolution and two channels (which is the format of a Red Book Audio-CD).
raw2yellow1(data)

When data was produced by a call to Linux::CDROM::read_raw, this method can be used to break down the chunk into its components according to Yellow Book Form 1 layout. It returns them as a list six values:
```
my ($sync, $head, $data, $edc, $zero, $ecc) = 
    Linux::CDROM::Format->raw2yellow1($raw_data);
```
raw2yellow2(data)

Breaks down data into its components according to Yellow Book Form 2 layout. It returns a list of three values:
```
my ($sync, $head, $data) =
    Linux::CDROM::Format->raw2yellow2($raw_data);
```
raw2green1(data)

Breaks down data into its components according to Green Book Form 1 layout. It returns a list of six values:
```
my ($sync, $head, $sub, $data, $edc, $ecc) =
    Linux::CDROM::Format->raw2green1($raw_data);
```
raw2green2(data)

Breaks down data into its components according to Green Book Form 2 layout. It returns a list of five values:
```
my ($sync, $head, $sub, $data, $edc) =
    Linux::CDROM::Format->raw2green2($raw_data);
```

ERROR REPORTING

All methods return undef when an error occured. Furthermore, Linux::CDROM uses a simple package variable $Linux::CDROM::error to give you details on the errors that occured.

This variable is a double-typed value so it returns a string with the error description in string context. This is useful when you want to immediately let your script die on errors:

my $cd = Linux::CDROM->new("/dev/hdd") 
    or die $Linux::CDROM::error;

However, you can also use symbolic constants to check which error occured in order to roll your own error-handling:

my $cd = Linux::CDROM->new("/dev/hdd");

if ($Linux::CDROM::error == LINUX_CDROM_NO_ERROR) {
    print "operation successful";
}
elsif ($Linux::CDROM::error == LINUX_CDROM_NO_OPEN) {
    print "open failed: $!";
    # custom error handling follows
    ...
}
elsif ($Linux::CDROM::error == LINUX_CDROM_NO_CDROM) {
    print "device is no CDROM drive";
    # custom error handling follows
    ...
}

$Linux::CDROM::error is guaranteed to have a false value when no error occured. So you could also write:

my $cd = Linux::CDROM->new("/dev/hdd");
if (! $Linux::CDROM::error) {
    print "No error occured";
} else {
    die $!;
}

There is a connection between this variable and $! in that in case of errors, the string stored in $Linux::CDROM::error has the format "error-description: $!".

The reason why this module doesn't only rely on $! is because the errors in $! are usually those returned from the ioctl system-call. This is very often "Input/Output error" so the content of $! maybe of limited help.

See the description for each method to find out whether it sets $Linux::CDROM::error.

The possible numerical values of $Linux::CDROM::error are those:

LINUX_CDROM_NO_ERROR: No error occured.
LINUX_CDROM_NO_OPEN: Opening the drive (not the tray!) failed.
LINUX_CDROM_NO_CDROM: Drive is no CDROM drive.
LINUX_CDROM_NO_TOCHDR: Couldn't read the TOC header of the CD.
LINUX_CDROM_NO_AUDIO: CD is not an Audio-CD.
LINUX_CDROM_NO_DISC_STATUS: Couldn't retrieve the disc-status of the CD.
LINUX_CDROM_IDX_OUT_OF_BOUNDS: The index was out of bounds. Can for instance happen when you request to look at a non-existent TOC-entry.
LINUX_CDROM_IOCTL_ERROR: This is a generic error. It means that although the circumstances for the desired operation were ok (for instance: an Audio-CD was in the drive when you wanted to play the audio) the ioctl failed (which can happen when you request to play beginning with minute 60 but the CD only has 40 minutes of audio).

EXPORT

Constants exported by default

CDC_CD_R
CDC_CD_RW
CDC_CLOSE_TRAY
CDC_DRIVE_STATUS
CDC_DVD
CDC_DVD_R
CDC_DVD_RAM
CDC_GENERIC_PACKET
CDC_IOCTLS
CDC_LOCK
CDC_MCN
CDC_MEDIA_CHANGED
CDC_MULTI_SESSION
CDC_OPEN_TRAY
CDC_PLAY_AUDIO
CDC_RESET
CDC_SELECT_DISC
CDC_SELECT_SPEED
CDROM_AUDIO_COMPLETED
CDROM_AUDIO_ERROR
CDROM_AUDIO_INVALID
CDROM_AUDIO_NO_STATUS
CDROM_AUDIO_PAUSED
CDROM_AUDIO_PLAY
CDROM_DATA_TRACK
CDROM_LBA
CDROM_LEADOUT
CDROM_MAX_SLOTS
CDROM_MSF
CDROM_PACKET_SIZE
CDSL_CURRENT
CDSL_NONE
CDS_AUDIO
CDS_DATA_1
CDS_DATA_2
CDS_DISC_OK
CDS_DRIVE_NOT_READY
CDS_MIXED
CDS_NO_DISC
CDS_NO_INFO
CDS_TRAY_OPEN
CDS_XA_2_1
CDS_XA_2_2
CD_CHUNK_SIZE
CD_ECC_SIZE
CD_EDC_SIZE
CD_FRAMES
CD_FRAMESIZE
CD_FRAMESIZE_RAW
CD_FRAMESIZE_RAW0
CD_FRAMESIZE_RAW1
CD_FRAMESIZE_RAWER
CD_FRAMESIZE_SUB
CD_HEAD_SIZE
CD_MINS
CD_MSF_OFFSET
CD_NUM_OF_CHUNKS
CD_PART_MASK
CD_PART_MAX
CD_SECS
CD_SUBHEAD_SIZE
CD_SYNC_SIZE
CD_XA_HEAD
CD_XA_SYNC_HEAD
CD_XA_TAIL
CD_ZERO_SIZE
CGC_DATA_NONE
CGC_DATA_READ
CGC_DATA_UNKNOWN
CGC_DATA_WRITE
EDRIVE_CANT_DO_THIS

Additional constants

Those (plus the default constants) can be imported on request by doing a

use Linux::CDROM qw(:all);

I strongly doubt you will need them.

CDROMAUDIOBUFSIZ
CDROMCLOSETRAY
CDROMEJECT
CDROMEJECT_SW
CDROMGETSPINDOWN
CDROMMULTISESSION
CDROMPAUSE
CDROMPLAYBLK
CDROMPLAYMSF
CDROMPLAYTRKIND
CDROMREADALL
CDROMREADAUDIO
CDROMREADCOOKED
CDROMREADMODE1
CDROMREADMODE2
CDROMREADRAW
CDROMREADTOCENTRY
CDROMREADTOCHDR
CDROMRESET
CDROMRESUME
CDROMSEEK
CDROMSETSPINDOWN
CDROMSTART
CDROMSTOP
CDROMSUBCHNL
CDROMVOLCTRL
CDROMVOLREAD
CDROM_CHANGER_NSLOTS
CDROM_CLEAR_OPTIONS
CDROM_DEBUG
CDROM_DISC_STATUS
CDROM_DRIVE_STATUS
CDROM_GET_CAPABILITY
CDROM_GET_UPC
CDROM_LAST_WRITTEN
CDROM_LOCKDOOR
CDROM_MEDIA_CHANGED
CDROM_NEXT_WRITABLE
CDROM_SELECT_DISC
CDROM_SELECT_SPEED
CDROM_SEND_PACKET
CDROM_SET_OPTIONS
DVD_AUTH
DVD_AUTH_ESTABLISHED
DVD_AUTH_FAILURE
DVD_CGMS_RESTRICTED
DVD_CGMS_SINGLE
DVD_CGMS_UNRESTRICTED
DVD_CPM_COPYRIGHTED
DVD_CPM_NO_COPYRIGHT
DVD_CP_SEC_EXIST
DVD_CP_SEC_NONE
DVD_HOST_SEND_CHALLENGE
DVD_HOST_SEND_KEY2
DVD_HOST_SEND_RPC_STATE
DVD_INVALIDATE_AGID
DVD_LAYERS
DVD_LU_SEND_AGID
DVD_LU_SEND_ASF
DVD_LU_SEND_CHALLENGE
DVD_LU_SEND_KEY1
DVD_LU_SEND_RPC_STATE
DVD_LU_SEND_TITLE_KEY
DVD_READ_STRUCT
DVD_STRUCT_BCA
DVD_STRUCT_COPYRIGHT
DVD_STRUCT_DISCKEY
DVD_STRUCT_MANUFACT
DVD_STRUCT_PHYSICAL
DVD_WRITE_STRUCT
GPCMD_BLANK
GPCMD_CLOSE_TRACK
GPCMD_FLUSH_CACHE
GPCMD_FORMAT_UNIT
GPCMD_GET_CONFIGURATION
GPCMD_GET_EVENT_STATUS_NOTIFICATION
GPCMD_GET_MEDIA_STATUS
GPCMD_GET_PERFORMANCE
GPCMD_INQUIRY
GPCMD_LOAD_UNLOAD
GPCMD_MECHANISM_STATUS
GPCMD_MODE_SELECT_10
GPCMD_MODE_SENSE_10
GPCMD_PAUSE_RESUME
GPCMD_PLAYAUDIO_TI
GPCMD_PLAY_AUDIO_10
GPCMD_PLAY_AUDIO_MSF
GPCMD_PLAY_AUDIO_TI
GPCMD_PLAY_CD
GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL
GPCMD_READ_10
GPCMD_READ_12
GPCMD_READ_CD
GPCMD_READ_CDVD_CAPACITY
GPCMD_READ_CD_MSF
GPCMD_READ_DISC_INFO
GPCMD_READ_DVD_STRUCTURE
GPCMD_READ_FORMAT_CAPACITIES
GPCMD_READ_HEADER
GPCMD_READ_SUBCHANNEL
GPCMD_READ_TOC_PMA_ATIP
GPCMD_READ_TRACK_RZONE_INFO
GPCMD_REPAIR_RZONE_TRACK
GPCMD_REPORT_KEY
GPCMD_REQUEST_SENSE
GPCMD_RESERVE_RZONE_TRACK
GPCMD_SCAN
GPCMD_SEEK
GPCMD_SEND_DVD_STRUCTURE
GPCMD_SEND_EVENT
GPCMD_SEND_KEY
GPCMD_SEND_OPC
GPCMD_SET_READ_AHEAD
GPCMD_SET_SPEED
GPCMD_SET_STREAMING
GPCMD_START_STOP_UNIT
GPCMD_STOP_PLAY_SCAN
GPCMD_TEST_UNIT_READY
GPCMD_VERIFY_10
GPCMD_WRITE_10
GPCMD_WRITE_AND_VERIFY_10
GPMODE_ALL_PAGES
GPMODE_AUDIO_CTL_PAGE
GPMODE_CAPABILITIES_PAGE
GPMODE_CDROM_PAGE
GPMODE_FAULT_FAIL_PAGE
GPMODE_POWER_PAGE
GPMODE_R_W_ERROR_PAGE
GPMODE_TO_PROTECT_PAGE
GPMODE_WRITE_PARMS_PAGE
mechtype_caddy
mechtype_cartridge_changer
mechtype_individual_changer
mechtype_popup
mechtype_tray

LIMITATIONS

This one most definitely only works for Linux so far.

All the DVD-related controls are unimplemented.

Other unimplemented ioctls are:

CDROMREADCOOKED
CDROMSEEK
CDROMPLAYBLK
CDROMREADALL
CDROM_SET_OPTIONS
CDROM_CLEAR_OPTIONS
CDROM_DEBUG
CDROM_SEND_PACKET

See Linux::CDROM::Cookbook, Recipe 10 on how to circumvent this limitation.

BUGS

Possibly. One problem is that there's no sensible way to equip the module with tests and so there are none when you install it.

AUTHOR

Tassilo von Parseval, <tassilo.von.parseval@rwth-aachen.de>

COPYRIGHT AND LICENSE

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.2 or, at your option, any later version of Perl 5 you may have available.

To install Linux::CDROM, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Linux::CDROM

CPAN shell

perl -MCPAN -e shell
install Linux::CDROM

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)