NAME
Paws::ElasticTranscoder::VideoParameters
USAGE
This class represents one of two things:
Arguments in a call to a service
Use the attributes of this class as arguments to methods. You shouldn't make instances of this class. Each attribute should be used as a named argument in the calls that expect this type of object.
As an example, if Att1 is expected to be a Paws::ElasticTranscoder::VideoParameters object:
$service_obj->Method(Att1 => { AspectRatio => $value, ..., Watermarks => $value });
Results returned from an API call
Use accessors for each attribute. If Att1 is expected to be an Paws::ElasticTranscoder::VideoParameters object:
$result = $service_obj->Method(...);
$result->Att1->AspectRatio
DESCRIPTION
The VideoParameters
structure.
ATTRIBUTES
AspectRatio => Str
To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth
, MaxHeight
, SizingPolicy
, PaddingPolicy
, and DisplayAspectRatio
instead of Resolution
and AspectRatio
. The two groups of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto
, 1:1
, 4:3
, 3:2
, 16:9
If you specify auto
, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
BitRate => Str
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of Level
and Profile
. If you specify auto
, Elastic Transcoder uses the detected bit rate of the input source. If you specify a value other than auto
, we recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
Codec => Str
The video codec for the output file. Valid values include gif
, H.264
, mpeg2
, vp8
, and vp9
. You can only specify vp8
and vp9
when the container type is webm
, gif
when the container type is gif
, and mpeg2
when the container type is mpg
.
CodecOptions => Paws::ElasticTranscoder::CodecOptions
Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline
: The profile most commonly used for videoconferencing and for mobile applications.main
: The profile used for standard-definition digital TV broadcasts.high
: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1
, 1b
, 1.1
, 1.2
, 1.3
, 2
, 2.1
, 2.2
, 3
, 3.1
, 3.2
, 4
, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or Resolution. Maximum decoded picture buffer in macroblocks depends on the value of the Level
object. See the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by BufferSize
. Specify a value between 16 and 62,500. You can reduce the bandwidth required to stream a video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the standard segment duration when you're using FMP4 or MPEG-TS for the container type of the output video. Specify an integer greater than 0. If you specify MaxBitRate
and omit BufferSize
, Elastic Transcoder sets BufferSize
to 10 times the value of MaxBitRate
.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive
(no interlacing, top to bottom), TopFirst
(top field first), BottomFirst
(bottom field first), and Auto
.
If InterlaceMode
is not specified, Elastic Transcoder uses Progressive
for the output. If Auto
is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms used by the computer to store information about how to render color. Bt.601
is the standard for standard definition video, while Bt.709
is the standard for high definition video.
Valid values include None
, Bt709toBt601
, Bt601toBt709
, and Auto
.
If you chose Auto
for ColorSpaceConversionMode
and your output is interlaced, your frame rate is one of 23.97
, 24
, 25
, 29.97
, 50
, or 60
, your SegmentDuration
is null, and you are using one of the resolution changes from the list below, Elastic Transcoder applies the following color space conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies
Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies
Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies
Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies
Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode
Auto
mode in the future. All outputs in a playlist must use the same ColorSpaceConversionMode
.
If you do not specify a ColorSpaceConversionMode
, Elastic Transcoder does not change the color space of a file. If you are unsure what ColorSpaceConversionMode
was applied to your output file, you can check the AppliedColorSpaceConversion
parameter included in your job response. If your job does not have an AppliedColorSpaceConversion
in its response, no ColorSpaceConversionMode
was applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include yuv420p
and yuv422p
.
yuv420p
samples the chroma information of every other horizontal and every other vertical line, yuv422p
samples the color information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite
and integers between 0
and 100
, inclusive.
DisplayAspectRatio => Str
The value that Elastic Transcoder adds to the metadata in the output file.
FixedGOP => Str
Applicable only when the value of Video:Codec is one of H.264
, MPEG2
, or VP8
.
Whether to use a fixed value for FixedGOP
. Valid values are true
and false
:
true
: Elastic Transcoder uses the value ofKeyframesMaxDist
for the distance between key frames (the number of frames in a group of pictures, or GOP).false
: The distance between key frames can vary.
FixedGOP
must be set to true
for fmp4
containers.
FrameRate => Str
The frames per second for the video stream in the output file. Valid values include:
auto
, 10
, 15
, 23.97
, 24
, 25
, 29.97
, 30
, 60
If you specify auto
, Elastic Transcoder uses the detected frame rate of the input source. If you specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
KeyframesMaxDist => Str
Applicable only when the value of Video:Codec is one of H.264
, MPEG2
, or VP8
.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth
outputs, the FrameRate
must have a constant ratio to the KeyframesMaxDist
. This allows Smooth
playlists to switch between different quality levels while the file is being played.
For example, an input file can have a FrameRate
of 30 with a KeyframesMaxDist
of 90. The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist
of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate
to auto and having the same values for MaxFrameRate
and KeyframesMaxDist
.
MaxFrameRate => Str
If you specify auto
for FrameRate
, Elastic Transcoder uses the frame rate of the input video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic Transcoder to use when the frame rate of the input video is greater than the desired maximum frame rate of the output video. Valid values include: 10
, 15
, 23.97
, 24
, 25
, 29.97
, 30
, 60
.
MaxHeight => Str
The maximum height of the output video in pixels. If you specify auto
, Elastic Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.
MaxWidth => Str
The maximum width of the output video in pixels. If you specify auto
, Elastic Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.
PaddingPolicy => Str
When you set PaddingPolicy
to Pad
, Elastic Transcoder may add black bars to the top and bottom and/or left and right sides of the output video to make the total size of the output video match the values that you specified for MaxWidth
and MaxHeight
.
Resolution => Str
To better control resolution and aspect ratio of output videos, we recommend that you use the values MaxWidth
, MaxHeight
, SizingPolicy
, PaddingPolicy
, and DisplayAspectRatio
instead of Resolution
and AspectRatio
. The two groups of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto
and width x height:
auto
: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the following rules.width x height
: The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
SizingPolicy => Str
Specify one of the following values to control scaling of the output video:
Fit
: Elastic Transcoder scales the output video so it matches the value that you specified in eitherMaxWidth
orMaxHeight
without exceeding the other value.Fill
: Elastic Transcoder scales the output video so it matches the value that you specified in eitherMaxWidth
orMaxHeight
and matches or exceeds the other value. Elastic Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.Stretch
: Elastic Transcoder stretches the output video to match the values that you specified forMaxWidth
andMaxHeight
. If the relative proportions of the input video and the output video are different, the output video will be distorted.Keep
: Elastic Transcoder does not scale the output video. If either dimension of the input video exceeds the values that you specified forMaxWidth
andMaxHeight
, Elastic Transcoder crops the output video.ShrinkToFit
: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one ofMaxWidth
andMaxHeight
without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.ShrinkToFill
: Elastic Transcoder scales the output video down so that its dimensions match the values that you specified for at least one ofMaxWidth
andMaxHeight
without dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.
Watermarks => ArrayRef[Paws::ElasticTranscoder::PresetWatermark]
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
SEE ALSO
This class forms part of Paws, describing an object used in Paws::ElasticTranscoder
BUGS and CONTRIBUTIONS
The source code is located here: https://github.com/pplu/aws-sdk-perl
Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues