NAME

Dancer2::Manual::Migration - Migrating from Dancer to Dancer2

VERSION

version 1.0.0

Migration from Dancer 1 to Dancer2

This document covers some changes that users will need to be aware of while upgrading from Dancer (version 1) to Dancer2.

Launcher script

The default launcher script bin/app.pl in Dancer looked like this:

#!/usr/bin/env perl
use Dancer;
use MyApp;
dance;

In Dancer2 it is available as bin/app.psgi and looks like this:

#!/usr/bin/env perl

use strict;
use warnings;
use FindBin;
use lib "$FindBin::Bin/../lib";

use MyApp;
MyApp->to_app;

So you need to remove the use Dancer; part, replace the dance; command by MyApp->to_app; (where MyApp is the name of your application), and add the following lines:

use strict;
use warnings;
use FindBin;
use lib "$FindBin::Bin/../lib";

There is a Dancer Advent Calendar article covering the to_app keyword and its usage.

Configuration

You specify a different location to the directory used for serving static (public) content by setting the public_dir option. In that case, you have to set static_handler option also.

Apps

1. In Dancer2, each module is a separate application with its own namespace and variables. You can set the application name in each of your Dancer2 application modules. Different modules can be tied into the same app by setting the application name to the same value.

For example, to set the appname directive explicitly:

MyApp:

package MyApp;
use Dancer2;
use MyApp::Admin

hook before => sub {
    var db => 'Users';
};

get '/' => sub {...};

1;

MyApp::Admin:

package MyApp::Admin;
use Dancer2 appname => 'MyApp';

# use a lexical prefix so we don't override it globally
prefix '/admin' => sub {
    get '/' => sub {...};
};

1;

Without the appname directive, MyApp::Admin would not have access to variable db. In fact, when accessing /admin, the before hook would not be executed.

See Dancer2::Cookbook for details.

2. To speed up an app in Dancer2, install the recommended modules listed in the "Performance Improvements" in Dancer2::Manual::Deployment section.

Request

The request object (Dancer2::Core::Request) is now deferring much of its code to Plack::Request to be consistent with the known interface to PSGI requests.

Currently the following attributes pass directly to Plack::Request:

address, remote_host, protocol, port, method, user, request_uri, script_name, content_length, content_type, content_encoding, referer, and user_agent.

If previous attributes returned undef for no value beforehand, they will return whatever Plack::Request defines now, which just might be an empty list.

For example:

my %data = (
    referer    => request->referer,
    user_agent => request->user_agent,
);

should be replaced by:

my %data = (
    referer    => request->referer    || '',
    user_agent => request->user_agent || '',
);

Plugins: plugin_setting

plugin_setting returns the configuration of the plugin. It can only be called in register or on_plugin_import.

Routes

Dancer2 requires all routes defined via a string to begin with a leading slash /.

For example:

get '0' => sub {
    return "not gonna fly";
};

would return an error. The correct way to write this would be to use get '/0'

Route parameters

The params keyword which provides merged parameters used to allow body parameters to override route parameters. Now route parameters take precedence over query parameters and body parameters.

We have introduced route_parameters to retrieve parameter values from the route matching. Please refer to Dancer2::Manual for more information.

Tests

Dancer2 recommends the use of Plack::Test.

For example:

use strict;
use warnings;
use Test::More tests => 2;
use Plack::Test;
use HTTP::Request::Common;

{
    package App::Test; # or whatever you want to call it
    get '/' => sub { template 'index' };
}

my $test = Plack::Test->create( App::Test->to_app );
my $res  = $test->request( GET '/' );

ok( $res->is_success, '[GET /] Successful' );
like( $res->content, qr{<title>Test2</title>}, 'Correct title' );

Other modules that could be used for testing are:

Logs

The logger_format in the Logger role (Dancer2::Core::Role::Logger) is now log_format.

read_logs can no longer be used, as with Dancer2::Test. Instead, Dancer2::Logger::Capture could be used for testing, to capture all logs to an object.

For example:

use strict;
use warnings;
use Test::More import => ['!pass'];
use Plack::Test;
use HTTP::Request::Common;
use Ref::Util qw<is_coderef>;

{
    package App;
    use Dancer2;

    set log       => 'debug';
    set logger    => 'capture';

    get '/' => sub {
        debug 'this is my debug message';
        return 1;
    };
}

my $app = Dancer2->psgi_app;
ok( is_coderef($app), 'Got app' );

test_psgi $app, sub {
    my $cb = shift;

    my $res = $cb->( GET '/' );
    is $res->code, 200;

    my $trap = App->dancer_app->logger_engine->trapper;

    is_deeply $trap->read, [
        { level => 'debug', message => 'this is my debug message' }
    ];
};

Exports: Tags

The following tags are not needed in Dancer2:

use Dancer2 qw(:syntax);
use Dancer2 qw(:tests);
use Dancer2 qw(:script);

The plackup command should be used instead. It provides a development server and reads the configuration options in your command line utilities.

Engines

Engines receive a logging callback

Engines now receive a logging callback named log_cb. Engines can use it to log anything in run-time, without having to worry about what logging engine is used.

This is provided as a callback because the logger might be changed in run-time and we want engines to be able to always reach the current one without having a reference back to the core application object.

The logger engine doesn't have the attribute since it is the logger itself.
Engines handle encoding consistently

All engines are now expected to handle encoding on their own. User code is expected to be in internal Perl representation.

Therefore, all serializers, for example, should deserialize to the Perl representation. Templates, in turn, encode to UTF-8 if requested by the user, or by default.

One side-effect of this is that from_yaml will call YAML's Load function with decoded input.

Templating engine changes

Whereas in Dancer1, the following were equivalent for Template::Toolkit:

template 'foo/bar'
template '/foo/bar'

In Dancer2, when using Dancer2::Template::TemplateToolkit, the version with the leading slash will try to locate /foo/bar relative to your filesystem root, not relative to your Dancer application directory.

The Dancer2::Template::Simple engine is unchanged in this respect.

Whereas in Dancer1, template engines have the methods:

$template_engine->view('foo.tt')
$template_engine->view_exists('foo.tt')

In Dancer2, you should instead write:

$template_engine->view_pathname('foo.tt')
$template_engine->pathname_exists($full_path)

You may not need these unless you are writing a templating engine.

Serializers

You no longer need to implement the loaded method. It is simply unnecessary.

Sessions

Now the Simple session engine is turned on by default, unless you specify a different one.

Configuration

`public_dir`

You cannot set the public directory with setting now. Instead you will need to call config:

# before
setting( 'public_dir', 'new_path/' );

# after
config->{'public_dir'} = 'new_path';

warnings

The warnings configuration option, along with the environment variable DANCER_WARNINGS, have been removed and have no effect whatsoever.

They were added when someone requested to be able to load Dancer without the warnings pragma, which it adds, just like Moose, Moo, and other modules provide.

If you want this to happen now (which you probably shouldn't be doing), you can always control it lexically:

use Dancer2;
no warnings;

You can also use Dancer2 within a narrower scope:

{ use Dancer2 }
use strict;
# warnings are not turned on

However, having warnings turned it is very recommended.

server_tokens

The configuration server_tokens has been introduced in the reverse (but more sensible, and Plack-compatible) form as no_server_tokens.

DANCER_SERVER_TOKENS changed to DANCER_NO_SERVER_TOKENS.

engines

If you want to use Template::Toolkit instead of the built-in simple templating engine you used to enable the following line in the config.yml file.

template: "template_toolkit"

That was enough to get started. The start_tag and end_tag it used were the same as in the simple template <% and %> respectively.

If you wanted to further customize the Template::Toolkit you could also enable or add the following:

engines:
  template_toolkit:
     encoding:  'utf8'
     start_tag: '[%'
     end_tag:   '%]'

In Dancer 2 you can also enable Template::Toolkit with the same configuration option:

template: "template_toolkit"

But the default start_tag and end_tag are now [% and %], so if you used the default in Dancer 1 now you will have to explicitly change the start_tag and end_tag values. The configuration also got an extra level of depth. Under the engine key there is a template key and the template_toolkit key comes below that. As in this example:

engines:
  template:
    template_toolkit:
      start_tag: '<%'
      end_tag:   '%>'

In a nutshell, if you used to have

template: "template_toolkit"

You need to replace it with

template: "template_toolkit"
engines:
  template:
    template_toolkit:
      start_tag: '<%'
      end_tag:   '%>'

Session engine

The session engine is configured in the engine section.

session_name changed to cookie_name.
session_domain changed to cookie_domain.
session_expires changed to cookie_duration.
session_secure changed to is_secure.
session_is_http_only changed to is_http_only.

Dancer2 also adds two attributes for session:

cookie_path The path of the cookie to create for storing the session key. Defaults to "/".
session_duration Duration in seconds before sessions should expire, regardless of cookie expiration. If set, then SessionFactories should use this to enforce a limit on session validity.

See Dancer2::Core::Role::SessionFactory for more detailed documentation for these options, or the particular session engine for other supported options.

session: Simple

engines:
  session:
    Simple:
      cookie_name: dance.set
      cookie_duration: '24 hours'
      is_secure: 1
      is_http_only: 1

Plack Middleware

In Dancer1 you could set up Plack Middleware using a plack_middlewares key in your config.yml file. Under Dancer2 you will instead need to invoke middleware using Plack::Builder, as demonstrated in Dancer2::Manual::Deployment.

Keywords

Calling Keywords Explicitly

In Dancer1, keywords could be imported individually into a package:

package MyApp;
use Dancer qw< get post params session >;

get '/foo' { ... };

Any keywords you did't export could be called explicitly:

package MyApp;
use Dancer qw< get post params session >;
use List::Util qw< any >;

Dancer::any sub { ... };

Dancer2's DSL is implemented differently. Keywords only exist in the namespace of the package which uses Dancer2, i.e. there is no Dancer2::any, only e.g. MyApp::any.

If you only want individual keywords, you can write a shim as follows:

package MyApp::DSL;
use Dancer2 appname => 'MyApp';

use Exporter qw< import >;

our @EXPORT = qw< get post ... >

Then in other packages:

package MyApp;

use MyApp::DSL qw< get post >;

MyApp::DSL::any sub { ... };

appdir

This keyword does not exist in Dancer2. However, the same information can be found in config->{'appdir'}.

load

This keyword is no longer required. Dancer2 loads the environment automatically and will not reload any other environment when called with load. (It's a good thing.)

param_array

This keyword doesn't exist in Dancer2.

session

In Dancer a session was created and a cookie was sent just by rendering a page using the template function. In Dancer2 one needs to actually set a value in a session object using the session function in order to create the session and send the cookie.

The session keyword has multiple states:

No arguments

Without any arguments, the session keyword returns a Dancer2::Core::Session object, which has methods for read, write, and delete.
```
my $session = session;
$session->read($key);
$session->write( $key => $value );
$session->delete($key);
```
Single argument (key)

If a single argument is provided, it is treated as the key, and it will retrieve the value for it.
```
my $value = session $key;
```
Two arguments (key, value)

If two arguments are provided, they are treated as a key and a value, in which case the session will assign the value to the key.
```
session $key => $value;
```
Two arguments (key, undef)

If two arguments are provided, but the second is undef, the key will be deleted from the session.
```
session $key => undef;
```

In Dancer 1 it wasn't possible to delete a key, but in Dancer2 we can finally delete:

# these two are equivalent
session $key => undef;

my $session = session;
$session->delete($key);

You can retrieve the whole session hash with the data method:

$session->data;

To destroy a session, instead of writing:

session->destroy

In Dancer2, we write:

app->destroy_session if app->has_session

If you make changes to the session in an after hook, your changes will not be written to storage, because writing sessions to storage also takes place in an (earlier) after hook.

AUTHOR

Dancer Core Developers

COPYRIGHT AND LICENSE

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.

To install Dancer2, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Dancer2

CPAN shell

perl -MCPAN -e shell
install Dancer2

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

VERSION

Migration from Dancer 1 to Dancer2

Launcher script

Configuration

Apps

Request

Plugins: plugin_setting

Routes

Route parameters

Tests

Logs

Exports: Tags

Engines

Templating engine changes

Serializers

Sessions

Configuration

public_dir

warnings

server_tokens

engines

Session engine

Plack Middleware

Keywords

Calling Keywords Explicitly

appdir

load

param_array

session

AUTHOR

COPYRIGHT AND LICENSE

Module Install Instructions

`public_dir`