NAME

Physics::Ellipsometry::VASE::MagnetoOptic - Magneto-optic Kerr effect (MOKE) models for spectroscopic ellipsometry

SYNOPSIS

use PDL;
use Physics::Ellipsometry::VASE::MagnetoOptic qw(
    magneto_optic_tensor kerr_rotation
);

my $lambda = sequence(100) * 10 + 400;

# Construct MO dielectric tensor for a ferromagnet
my $eps_d  = pdl(-13.8) + i()*pdl(15.7);   # diagonal (Fe at 633nm)
my $eps_od = pdl(0.74)  + i()*pdl(0.21);   # off-diagonal (Q*N)
my $tensor = magneto_optic_tensor($eps_d, $eps_od,
                                   geometry => 'polar');

# Kerr rotation from a semi-infinite magnetic layer
my ($theta_K, $eta_K) = kerr_rotation($lambda, 65,
    eps_diag => pdl(-13.8)+i()*pdl(15.7),
    Q        => pdl(0.04)+i()*pdl(0.006),
    geometry => 'polar',
);

DESCRIPTION

The magneto-optic Kerr effect (MOKE) describes the change in polarization state of light upon reflection from a magnetized material. It is widely used for magnetic thin film characterization and has three geometries:

Polar MOKE - Magnetization perpendicular to the surface (along z). Produces Kerr rotation in the reflected beam for both s- and p-polarized light. Typically the largest signal.
Longitudinal MOKE - Magnetization in the surface plane, within the plane of incidence (along x). Produces rotation proportional to cos(θ).
Transverse MOKE - Magnetization in the surface plane, perpendicular to the plane of incidence (along y). Changes only the p-polarized reflectance amplitude (no rotation; changes Δ only).

The magneto-optic response is described by the Voigt parameter Q, which quantifies the ratio of off-diagonal to diagonal permittivity:

epsilon_xy = i * Q * epsilon_xx

The full dielectric tensor for polar geometry:

       ⎡ ε_xx   iQε    0  ⎤
ε  =   ⎢-iQε   ε_yy    0  ⎥
       ⎣  0      0    ε_zz ⎦

For longitudinal geometry, the off-diagonal elements appear in the xz and zx positions.

FUNCTIONS

magneto_optic_tensor

my $tensor = magneto_optic_tensor($eps_diag, $eps_offdiag,
                                   geometry => 'polar');

Constructs the 3×3 dielectric tensor with magneto-optic off-diagonal elements.

Parameters:

$eps_diag - diagonal permittivity component(s) (complex PDL or scalar)
$eps_offdiag - off-diagonal permittivity (= i*Q*eps_diag for polar)
geometry - 'polar', 'longitudinal', or 'transverse'

Returns: hashref {xx, yy, zz, xy, xz, yz} suitable for use with berreman_4x4.

# Fe at 633 nm (polar magnetization)
my $t = magneto_optic_tensor(
    pdl(-13.8) + i()*pdl(15.7),
    pdl(0.74) + i()*pdl(0.21),
    geometry => 'polar',
);
# $t->{xy} contains the off-diagonal element

kerr_rotation

my ($theta_K, $eta_K) = kerr_rotation($lambda_nm, $theta_deg, %params);

Calculates the complex Kerr angle (rotation + ellipticity) for reflection from a semi-infinite magnetized medium.

For polar MOKE at oblique incidence:

θ_K + i*η_K = -i * Q * N * cos(θ_t)
              / ((ε - 1) * cos(θ_m))

where θ_t is the refraction angle inside the medium and θ_m depends on the geometry.

Parameters:

eps_diag - diagonal dielectric constant (complex)
Q - Voigt magneto-optic parameter (complex)
geometry - 'polar' (default), 'longitudinal', or 'transverse'

Returns: two PDL piddles:

$theta_K - Kerr rotation angle [millidegrees]
$eta_K - Kerr ellipticity [millidegrees]

Example — spectral Kerr rotation of iron:

use Physics::Ellipsometry::VASE::MagnetoOptic qw(kerr_rotation);

my $lambda = sequence(50) * 20 + 400;  # 400-1380 nm

# Fe optical and MO constants (energy-dependent)
my $E = 1240.0 / $lambda;  # eV
my $eps = pdl(-13.8) + i()*pdl(15.7);  # simplified constant
my $Q = pdl(0.04) + i()*pdl(0.006);

my ($theta, $eta) = kerr_rotation($lambda, 0,
    eps_diag => $eps,
    Q        => $Q,
    geometry => 'polar',
);
printf "Kerr rotation at 633nm: %.1f mdeg\n", $theta->at(11);
printf "Kerr ellipticity at 633nm: %.1f mdeg\n", $eta->at(11);

NOTES

  • Kerr rotation angles are typically small (0.01-1°), requiring sensitive detection (modulation techniques, lock-in amplifiers).

  • For multilayer magnetic structures, combine with "berreman_4x4" in Physics::Ellipsometry::VASE::Anisotropy using the tensor from magneto_optic_tensor.

  • Typical Voigt parameters: Fe Q≈0.04, Co Q≈0.05, Ni Q≈0.02 at visible wavelengths.

SEE ALSO

Physics::Ellipsometry::VASE::Anisotropy, Physics::Ellipsometry::VASE::TMM

P.M. Oppeneer, "Magneto-optical Kerr spectra", Handbook of Magnetic Materials 13, 229 (2001).

Z.Q. Qiu and S.D. Bader, "Surface magneto-optic Kerr effect", Rev. Sci. Instrum. 71, 1243 (2000).