NAME

Net::SSLeay - Perl extension for using OpenSSL

SYNOPSIS

  use Net::SSLeay qw(get_https post_https sslcat make_headers make_form);

  ($page) = get_https('www.bacus.pt', 443, '/');                 # Case 1

  ($page, $response, %reply_headers)
	 = get_https('www.bacus.pt', 443, '/',                   # Case 2
	 	make_headers(User-Agent => 'Cryptozilla/5.0b1',
			     Referer    => 'https://www.bacus.pt'
		));

  ($page, $result, %headers) =                                   # Case 2b
         = get_https('www.bacus.pt', 443, '/protected.html',
	      make_headers(Authorization =>
			   'Basic ' . MIME::Base64::encode("$user:$pass",''))
	      );

  ($page, $response, %reply_headers)
	 = post_https('www.bacus.pt', 443, '/foo.cgi', '',       # Case 3
		make_form(OK   => '1',
			  name => 'Sampo'
		));

  $reply = sslcat($host, $port, $request);                       # Case 4

  ($reply, $err, $server_cert) = sslcat($host, $port, $request); # Case 5

  $Net::SSLeay::trace = 2;  # 0=no debugging, 1=ciphers, 2=trace, 3=dump data

  Net::SSLeay::initialize(); # Initialize ssl library once

DESCRIPTION

Net::SSLeay module contains perl bindings to openssl (http://www.openssl.org) library.

COMPATIBILITY NOTE: Net::SSLeay cannot be built with pre-0.9.3 openssl. It is strongly recommended to use at least 0.9.7 (as older versions are not tested during development). Some low level API functions may be available with certain openssl versions.

Net::SSLeay module basically comprise of:

High level functions for accessing web servers (by using HTTP/HTTPS)
Low level API (mostly mapped 1:1 to openssl's C functions)
Convenience functions (related to low level API but with more perl friendly interface)

There is also a related module called Net::SSLeay::Handle included in this distribution that you might want to use instead. It has its own pod documentation.

High level functions for accessing web servers

This module offers some high level convenience functions for accessing web pages on SSL servers (for symmetry, the same API is offered for accessing http servers, too), an sslcat() function for writing your own clients, and finally access to the SSL api of the SSLeay/OpenSSL package so you can write servers or clients for more complicated applications.

For high level functions it is most convenient to import them into your main namespace as indicated in the synopsis.

Basic set of functions

get_https
post_https
put_https
head_https
do_https
sslcat
https_cat
make_form
make_headers

Case 1 (in SYNOPSIS) demonstrates the typical invocation of get_https() to fetch an HTML page from secure server. The first argument provides the hostname or IP in dotted decimal notation of the remote server to contact. The second argument is the TCP port at the remote end (your own port is picked arbitrarily from high numbered ports as usual for TCP). The third argument is the URL of the page without the host name part. If in doubt consult the HTTP specifications at http://www.w3c.org.

Case 2 (in SYNOPSIS) demonstrates full fledged use of get_https(). As can be seen, get_https() parses the response and response headers and returns them as a list, which can be captured in a hash for later reference. Also a fourth argument to get_https() is used to insert some additional headers in the request. make_headers() is a function that will convert a list or hash to such headers. By default get_https() supplies Host (to make virtual hosting easy) and Accept (reportedly needed by IIS) headers.

Case 2b (in SYNOPSIS) demonstrates how to get a password protected page. Refer to the HTTP protocol specifications for further details (e.g. RFC-2617).

Case 3 (in SYNOPSIS) invokes post_https() to submit a HTML/CGI form to a secure server. The first four arguments are equal to get_https() (note that the empty string ('') is passed as header argument). The fifth argument is the contents of the form formatted according to CGI specification. In this case the helper function make_https() is used to do the formatting, but you could pass any string. post_https() automatically adds Content-Type and Content-Length headers to the request.

Case 4 (in SYNOPSIS) shows the fundamental sslcat() function (inspired in spirit by the netcat utility :-). It's your swiss army knife that allows you to easily contact servers, send some data, and then get the response. You are responsible for formatting the data and parsing the response - sslcat() is just a transport.

Case 5 (in SYNOPSIS) is a full invocation of sslcat() which allows the return of errors as well as the server (peer) certificate.

The $trace global variable can be used to control the verbosity of the high level functions. Level 0 guarantees silence, level 1 (the default) only emits error messages.

Alternate versions of high-level API

get_https3
post_https3
put_https3
get_https4
post_https4
put_https4

The above mentioned functions actually return the response headers as a list, which only gets converted to hash upon assignment (this assignment looses information if the same header occurs twice, as may be the case with cookies). There are also other variants of the functions that return unprocessed headers and that return a reference to a hash.

  ($page, $response, @headers) = get_https('www.bacus.pt', 443, '/');
  for ($i = 0; $i < $#headers; $i+=2) {
      print "$headers[$i] = " . $headers[$i+1] . "\n";
  }

  ($page, $response, $headers, $server_cert)
    = get_https3('www.bacus.pt', 443, '/');
  print "$headers\n";

  ($page, $response, %headers_ref, $server_cert)
    = get_https4('www.bacus.pt', 443, '/');
  for $k (sort keys %{headers_ref}) {
      for $v (@{$headers_ref{$k}}) {
	  print "$k = $v\n";
      }
  }

All of the above code fragments accomplish the same thing: display all values of all headers. The API functions ending in "3" return the headers simply as a scalar string and it is up to the application to split them up. The functions ending in "4" return a reference to a hash of arrays (see perlref and perllol if you are not familiar with complex perl data structures). To access a single value of such a header hash you would do something like

print $headers_ref{COOKIE}[0];

Variants 3 and 4 also allow you to discover the server certificate in case you would like to store or display it, e.g.

  ($p, $resp, $hdrs, $server_cert) = get_https3('www.bacus.pt', 443, '/');
  if (!defined($server_cert) || ($server_cert == 0)) {
      warn "Subject Name: undefined, Issuer  Name: undefined";
  } else {
      warn 'Subject Name: '
	  . Net::SSLeay::X509_NAME_oneline(
		 Net::SSLeay::X509_get_subject_name($server_cert))
	      . 'Issuer  Name: '
		  . Net::SSLeay::X509_NAME_oneline(
                         Net::SSLeay::X509_get_issuer_name($server_cert));
  }

Beware that this method only allows after the fact verification of the certificate: by the time get_https3() has returned the https request has already been sent to the server, whether you decide to trust it or not. To do the verification correctly you must either employ the OpenSSL certificate verification framework or use the lower level API to first connect and verify the certificate and only then send the http data. See the implementation of ds_https3() for guidance on how to do this.

Using client certificates

Secure web communications are encrypted using symmetric crypto keys exchanged using encryption based on the certificate of the server. Therefore in all SSL connections the server must have a certificate. This serves both to authenticate the server to the clients and to perform the key exchange.

Sometimes it is necessary to authenticate the client as well. Two options are available: HTTP basic authentication and a client side certificate. The basic authentication over HTTPS is actually quite safe because HTTPS guarantees that the password will not travel in the clear. Never-the-less, problems like easily guessable passwords remain. The client certificate method involves authentication of the client at the SSL level using a certificate. For this to work, both the client and the server have certificates (which typically are different) and private keys.

The API functions outlined above accept additional arguments that allow one to supply the client side certificate and key files. The format of these files is the same as used for server certificates and the caveat about encrypting private keys applies.

  ($page, $result, %headers) =                                   # 2c
         = get_https('www.bacus.pt', 443, '/protected.html',
	      make_headers(Authorization =>
			   'Basic ' . MIME::Base64::encode("$user:$pass",'')),
	      '', $mime_type6, $path_to_crt7, $path_to_key8);

  ($page, $response, %reply_headers)
	 = post_https('www.bacus.pt', 443, '/foo.cgi',           # 3b
	      make_headers('Authorization' =>
			   'Basic ' . MIME::Base64::encode("$user:$pass",'')),
	      make_form(OK   => '1', name => 'Sampo'),
	      $mime_type6, $path_to_crt7, $path_to_key8);

Case 2c (in SYNOPSIS) demonstrates getting a password protected page that also requires a client certificate, i.e. it is possible to use both authentication methods simultaneously.

Case 3b (in SYNOPSIS) is a full blown POST to a secure server that requires both password authentication and a client certificate, just like in case 2c.

Note: The client will not send a certificate unless the server requests one. This is typically achieved by setting the verify mode to VERIFY_PEER on the server:

Net::SSLeay::set_verify(ssl, Net::SSLeay::VERIFY_PEER, 0);

See perldoc ~openssl/doc/ssl/SSL_CTX_set_verify.pod for a full description.

Working through a web proxy

set_proxy

Net::SSLeay can use a web proxy to make its connections. You need to first set the proxy host and port using set_proxy() and then just use the normal API functions, e.g:

Net::SSLeay::set_proxy('gateway.myorg.com', 8080);
($page) = get_https('www.bacus.pt', 443, '/');

If your proxy requires authentication, you can supply a username and password as well

  Net::SSLeay::set_proxy('gateway.myorg.com', 8080, 'joe', 'salainen');
  ($page, $result, %headers) =
         = get_https('www.bacus.pt', 443, '/protected.html',
	      make_headers(Authorization =>
			   'Basic ' . MIME::Base64::encode("susie:pass",''))
	      );

This example demonstrates the case where we authenticate to the proxy as "joe" and to the final web server as "susie". Proxy authentication requires the MIME::Base64 module to work.

HTTP (without S) API

get_http
post_http
tcpcat
get_httpx
post_httpx
tcpxcat

Over the years it has become clear that it would be convenient to use the light-weight flavour API of Net::SSLeay for normal HTTP as well (see LWP for the heavy-weight object-oriented approach). In fact it would be nice to be able to flip https on and off on the fly. Thus regular HTTP support was evolved.

  use Net::SSLeay qw(get_http post_http tcpcat
                      get_httpx post_httpx tcpxcat
                      make_headers make_form);

  ($page, $result, %headers)
         = get_http('www.bacus.pt', 443, '/protected.html',
	      make_headers(Authorization =>
			   'Basic ' . MIME::Base64::encode("$user:$pass",''))
	      );

  ($page, $response, %reply_headers)
	 = post_http('www.bacus.pt', 443, '/foo.cgi', '',
		make_form(OK   => '1',
			  name => 'Sampo'
		));

  ($reply, $err) = tcpcat($host, $port, $request);

  ($page, $result, %headers)
         = get_httpx($usessl, 'www.bacus.pt', 443, '/protected.html',
	      make_headers(Authorization =>
			   'Basic ' . MIME::Base64::encode("$user:$pass",''))
	      );

  ($page, $response, %reply_headers)
	 = post_httpx($usessl, 'www.bacus.pt', 443, '/foo.cgi', '',
		make_form(OK   => '1',  name => 'Sampo'	));

  ($reply, $err, $server_cert) = tcpxcat($usessl, $host, $port, $request);

As can be seen, the "x" family of APIs takes as the first argument a flag which indicates whether SSL is used or not.

Certificate verification and Certificate Revocation Lists (CRLs)

OpenSSL supports the ability to verify peer certificates. It can also optionally check the peer certificate against a Certificate Revocation List (CRL) from the certificates issuer. A CRL is a file, created by the certificate issuer that lists all the certificates that it previously signed, but which it now revokes. CRLs are in PEM format.

You can enable Net::SSLeay CRL checking like this:

    &Net::SSLeay::X509_STORE_set_flags
	(&Net::SSLeay::CTX_get_cert_store($ssl),
	 &Net::SSLeay::X509_V_FLAG_CRL_CHECK);

After setting this flag, if OpenSSL checks a peer's certificate, then it will attempt to find a CRL for the issuer. It does this by looking for a specially named file in the search directory specified by CTX_load_verify_locations. CRL files are named with the hash of the issuer's subject name, followed by .r0, .r1 etc. For example ab1331b2.r0, ab1331b2.r1. It will read all the .r files for the issuer, and then check for a revocation of the peer certificate in all of them. (You can also force it to look in a specific named CRL file., see below). You can find out the hash of the issuer subject name in a CRL with

openssl crl -in crl.pem -hash -noout

If the peer certificate does not pass the revocation list, or if no CRL is found, then the handshaking fails with an error.

You can also force OpenSSL to look for CRLs in one or more arbitrarily named files.

my $bio = Net::SSLeay::BIO_new_file($crlfilename, 'r');
my $crl = Net::SSLeay::PEM_read_bio_X509_CRL($bio);
if ($crl) {
    Net::SSLeay::X509_STORE_add_crl(Net::SSLeay::CTX_get_cert_store($ssl, $crl);
} else {
    error reading CRL....
}

Using Net::SSLeay in multi-threaded applications

IMPORTANT: versions 1.42 or earlier are not thread-safe!

Net::SSLeay module implements all necessary stuff to be ready for multi-threaded environment - it requires openssl-0.9.7 or newer. The implementation fully follows thread safety related requirements of openssl library(see http://www.openssl.org/docs/crypto/threads.html).

If you are about to use Net::SSLeay (or any other module based on Net::SSLeay) in multi-threaded perl application it is recommended to follow this best-practice:

Initialization

Load and initialize Net::SSLeay module in the main thread:

use threads;
use Net::SSLeay;

Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

sub do_master_job {
  #... call whatever from Net::SSLeay
}

sub do_worker_job {
  #... call whatever from Net::SSLeay
}

#start threads
my $master  = threads->new(\&do_master_job, 'param1', 'param2');
my @workers = threads->new(\&do_worker_job, 'arg1', 'arg2') for (1..10);

#waiting for all threads to finish
$_->join() for (threads->list);

NOTE: Openssl's int SSL_library_init(void) function (which is also aliased as SSLeay_add_ssl_algorithms, OpenSSL_add_ssl_algorithms and add_ssl_algorithms) is not re-entrant and multiple calls can cause a crash in threaded application. Net::SSLeay implements flags preventing repeated calls to this function, therefore even multiple initialization via Net::SSLeay::SSLeay_add_ssl_algorithms() should work without trouble.

Using callbacks

Do not use callbacks across threads (the module blocks cross-thread callback operations and throws a warning). Allways do the callback setup, callback use and callback destruction within the same thread.

Using openssl elements

All openssl elements (X509, SSL_CTX, ...) can be directly passed between threads.

use threads;
use Net::SSLeay;

Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

sub do_job {
  my $context = shift;
  Net::SSLeay::CTX_set_default_passwd_cb($context, sub { "secret" });
  #...
}

my $c = Net::SSLeay::CTX_new();
threads->create(\&do_job, $c);

Or:

use threads;
use Net::SSLeay;

my $context; #does not need to be 'shared'

Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

sub do_job {
  Net::SSLeay::CTX_set_default_passwd_cb($context, sub { "secret" });
  #...
}

$context = Net::SSLeay::CTX_new();
threads->create(\&do_job);

Using other perl modules based on Net::SSLeay

It should be fine to use any other module based on Net::SSLeay (like IO::Socket::SSL) in multi-threaded applications. It is generally recommended to do any global initialization of such a module in the main thread before calling threads->new(..) or threads->create(..) but it might differ module by module.

To be play safe you can load and init Net::SSLeay explicitely in the main thread:

use Net::SSLeay;
use Other::SSLeay::Based::Module;

Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();Net::SSLeay::initialize();
Net::SSLeay::initialize();

Or even safer:

use Net::SSLeay;
use Other::SSLeay::Based::Module;

BEGIN {
  Net::SSLeay::load_error_strings();
  Net::SSLeay::SSLeay_add_ssl_algorithms();
  Net::SSLeay::randomize();Net::SSLeay::initialize();
}

Combining Net::SSLeay with other modules linked with openssl

BEWARE: This might be a big trouble! This is not guaranteed be thread-safe!

There are many other (XS) modules linked directly to openssl library (like Crypt::SSLeay).

As it is expected that also "another" module will call SSLeay_add_ssl_algorithms at some point we have again a trouble with multiple openssl initialization by Net::SSLeay and "another" module.

As you can expect Net::SSLeay is not able to avoid multiple initialization of openssl library called by "another" module, thus you have to handle this on your own (in some cases it might not be possible at all to avoid this).

Threading with get_https and friends

The convenience functions get_https, post_https etc all initialize the SSL library by calling Net::SSLeay::initialize which does the conventional library initialization:

Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

Net::SSLeay::initialize initializes the SSL library at most once. You can override the Net::SSLeay::initialize function if you desire some other type of initialization behaviour by get_https and friends. You can call Net::SSLeay::initialize from your own code if you desire this conventional library initialization.

Convenience routines

To be used with Low level API

Net::SSLeay::randomize($rn_seed_file,$additional_seed);
Net::SSLeay::set_cert_and_key($ctx, $cert_path, $key_path);
$cert = Net::SSLeay::dump_peer_certificate($ssl);
Net::SSLeay::ssl_write_all($ssl, $message) or die "ssl write failure";
$got = Net::SSLeay::ssl_read_all($ssl) or die "ssl read failure";

$got = Net::SSLeay::ssl_read_CRLF($ssl [, $max_length]);
$got = Net::SSLeay::ssl_read_until($ssl [, $delimit [, $max_length]]);
Net::SSLeay::ssl_write_CRLF($ssl, $message);

randomize

seeds the openssl PRNG with /dev/urandom (see the top of SSLeay.pm for how to change or configure this) and optionally with user provided data. It is very important to properly seed your random numbers, so do not forget to call this. The high level API functions automatically call randomize() so it is not needed with them. See also caveats.
set_cert_and_key

takes two file names as arguments and sets the certificate and private key to those. This can be used to set either server certificates or client certificates.
dump_peer_certificate

allows you to get a plaintext description of the certificate the peer (usually the server) presented to us.
ssl_read_all

see ssl_write_all (below)
ssl_write_all

ssl_read_all() and ssl_write_all() provide true blocking semantics for these operations (see limitation, below, for explanation). These are much preferred to the low level API equivalents (which implement BSD blocking semantics). The message argument to ssl_write_all() can be a reference. This is helpful to avoid unnecessary copying when writing something big, e.g:
```
$data = 'A' x 1000000000;
Net::SSLeay::ssl_write_all($ssl, \$data) or die "ssl write failed";
```
ssl_read_CRLF

uses ssl_read_all() to read in a line terminated with a carriage return followed by a linefeed (CRLF). The CRLF is included in the returned scalar.
ssl_read_until

uses ssl_read_all() to read from the SSL input stream until it encounters a programmer specified delimiter. If the delimiter is undefined, $/ is used. If $/ is undefined, \n is used. One can optionally set a maximum length of bytes to read from the SSL input stream.
ssl_write_CRLF

writes $message and appends CRLF to the SSL output stream.

Initialization

In order to use the low level API you should start your programs with the following incantation:

	use Net::SSLeay qw(die_now die_if_ssl_error);
	Net::SSLeay::load_error_strings();
	Net::SSLeay::SSLeay_add_ssl_algorithms();    # Important!
        Net::SSLeay::ENGINE_load_builtin_engines();  # If you want built-in engines
        Net::SSLeay::ENGINE_register_all_complete(); # If you want built-in engines
        Net::SSLeay::randomize();

Error handling functions

I can not emphasize the need to check for error enough. Use these functions even in the most simple programs, they will reduce debugging time greatly. Do not ask questions on the mailing list without having first sprinkled these in your code.

die_now

die_if_ssl_error

die_now() and die_if_ssl_error() are used to conveniently print the SSLeay error stack when something goes wrong:

Net::SSLeay::connect($ssl) or die_now("Failed SSL connect ($!)");


Net::SSLeay::write($ssl, "foo") or die_if_ssl_error("SSL write ($!)");

print_errs

You can also use Net::SSLeay::print_errs() to dump the error stack without exiting the program. As can be seen, your code becomes much more readable if you import the error reporting functions into your main name space.

Sockets

Perl uses file handles for all I/O. While SSLeay has a quite flexible BIO mechanism and perl has an evolved PerlIO mechanism, this module still sticks to using file descriptors. Thus to attach SSLeay to a socket you should use fileno() to extract the underlying file descriptor:

Net::SSLeay::set_fd($ssl, fileno(S));   # Must use fileno

You should also set $| to 1 to eliminate STDIO buffering so you do not get confused if you use perl I/O functions to manipulate your socket handle.

If you need to select(2) on the socket, go right ahead, but be warned that OpenSSL does some internal buffering so SSL_read does not always return data even if the socket selected for reading (just keep on selecting and trying to read). Net::SSLeay is no different from the C language OpenSSL in this respect.

Callbacks

You can establish a per-context verify callback function something like this:

sub verify {
    my ($ok, $x509_store_ctx) = @_;
    print "Verifying certificate...\n";
	...
    return $ok;
}

It is used like this:

Net::SSLeay::set_verify ($ssl, Net::SSLeay::VERIFY_PEER, \&verify);

Per-context callbacks for decrypting private keys are implemented.

        Net::SSLeay::CTX_set_default_passwd_cb($ctx, sub { "top-secret" });
        Net::SSLeay::CTX_use_PrivateKey_file($ctx, "key.pem",
					     Net::SSLeay::FILETYPE_PEM)
            or die "Error reading private key";
        Net::SSLeay::CTX_set_default_passwd_cb($ctx, undef);

If Hello Extensions are supported by your OpenSSL, a session secret callback can be set up to be called when a session secret is set by openssl.

Establish it like this: Net::SSLeay::set_session_secret_cb($ssl, \&session_secret_cb, $somedata);

It will be called like this:

sub session_secret_cb
{
    my ($secret, \@cipherlist, \$preferredcipher, $somedata) = @_;
}

No other callbacks are implemented. You do not need to use any callback for simple (i.e. normal) cases where the SSLeay built-in verify mechanism satisfies your needs.

It is required to reset these callbacks to undef immediately after use to prevent memory leaks, thread safety problems and crashes on exit that can occur if different threads set different callbacks.

If you want to use callback stuff, see examples/callback.pl! It's the only one I am able to make work reliably.

Low level API

In addition to the high level functions outlined above, this module contains straight-forward access to CRYPTO and SSL parts of OpenSSL C API.

See the *.h headers from OpenSSL C distribution for a list of low level SSLeay functions to call (check SSLeay.xs to see if some function has been implemented). The module strips the initial "SSL_" off of the SSLeay names. Generally you should use Net::SSLeay:: in its place.

Note that some functions are prefixed with "P_" - these are very close to the original API however contain some kind of a wrapper making its interface more perl friendly.

For example:

In C:

#include <ssl.h>

err = SSL_set_verify (ssl, SSL_VERIFY_CLIENT_ONCE,
			   &your_call_back_here);

In Perl:

use Net::SSLeay;

$err = Net::SSLeay::set_verify ($ssl,
				Net::SSLeay::VERIFY_CLIENT_ONCE,
				\&your_call_back_here);

If the function does not start with SSL_ you should use the full function name, e.g.:

$err = Net::SSLeay::ERR_get_error;

The following new functions behave in perlish way:

	$got = Net::SSLeay::read($ssl);
                                    # Performs SSL_read, but returns $got
                                    # resized according to data received.
                                    # Returns undef on failure.

	Net::SSLeay::write($ssl, $foo) || die;
                                    # Performs SSL_write, but automatically
                                    # figures out the size of $foo

SSLeay

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

Gives version number (numeric) of underlaying openssl library.

my $ver_number = Net::SSLeay::SSLeay();
# returns: the number identifying the openssl release
#
# 0x00903100 => openssl-0.9.3
# 0x00904100 => openssl-0.9.4
# 0x00905100 => openssl-0.9.5
# 0x0090600f => openssl-0.9.6
# 0x0090601f => openssl-0.9.6a
# 0x0090602f => openssl-0.9.6b
# ...
# 0x009060df => openssl-0.9.6m
# 0x0090700f => openssl-0.9.7
# 0x0090701f => openssl-0.9.7a
# 0x0090702f => openssl-0.9.7b
# ...
# 0x009070df => openssl-0.9.7m
# 0x0090800f => openssl-0.9.8
# 0x0090801f => openssl-0.9.8a
# 0x0090802f => openssl-0.9.8b
# ...
# 0x0090814f => openssl-0.9.8t
# 0x1000000f => openssl-1.0.0
# 0x1000004f => openssl-1.0.0d
# 0x1000007f => openssl-1.0.0g

You can use it like this:

if (Net::SSLeay::SSLeay() < 0x0090800f) {
  die "you need openssl-0.9.8 or higher";
}

SSLeay_version

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

Gives version number (string) of underlaying openssl library.

my $ver_string = Net::SSLeay::SSLeay_version($type);
# $type
#   0 (=SSLEAY_VERSION) - e.g. 'OpenSSL 1.0.0d 8 Feb 2011'
#   2 (=SSLEAY_CFLAGS)  - e.g. 'compiler: gcc -D_WINDLL -DOPENSSL_USE_APPLINK .....'
#   3 (=SSLEAY_BUILT_ON)- e.g. 'built on: Fri May  6 00:00:46 GMT 2011'
#   4 (=SSLEAY_PLATFORM)- e.g. 'platform: mingw'
#
# returns: string

Net::SSLeay::SSLeay_version();
#is equivalent to
Net::SSLeay::SSLeay_version(0);

Check openssl doc http://www.openssl.org/docs/crypto/SSLeay_version.html

library_init

Initialize SSL library by registering algorithms.
```
my $rv = Net::SSLeay::library_init();
#
# returns: always 1
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_library_init.html
add_ssl_algorithms

The alias for "library_init"
```
Net::SSLeay::add_ssl_algorithms();
```
OpenSSL_add_ssl_algorithms

The alias for "library_init"
```
Net::SSLeay::OpenSSL_add_ssl_algorithms();
```
SSLeay_add_ssl_algorithms

The alias for "library_init"
```
Net::SSLeay::SSLeay_add_ssl_algorithms();
```
load_error_strings

Registers the error strings for all libcrypto + libssl related functions.
```
Net::SSLeay::load_error_strings();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_load_crypto_strings.html
ERR_load_crypto_strings

Registers the error strings for all libcrypto functions. No need to call this function if you have already called "load_error_strings".
```
Net::SSLeay::ERR_load_crypto_strings();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_load_crypto_strings.html
ERR_load_RAND_strings

Registers the error strings for RAND related functions. No need to call this function if you have already called "load_error_strings".
```
Net::SSLeay::ERR_load_RAND_strings();
#
# returns: no return value
```
ERR_load_SSL_strings

Registers the error strings for SSL related functions. No need to call this function if you have already called "load_error_strings".
```
Net::SSLeay::ERR_load_SSL_strings();
#
# returns: no return value
```
OpenSSL_add_all_algorithms

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Add algorithms to internal table.
```
Net::SSLeay::OpenSSL_add_all_algorithms();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/OpenSSL_add_all_algorithms.html
OPENSSL_add_all_algorithms_conf

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Similar to "OpenSSL_add_all_algorithms" - will ALWAYS load the config file
```
Net::SSLeay::OPENSSL_add_all_algorithms_conf();
#
# returns: no return value
```
OPENSSL_add_all_algorithms_noconf

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Similar to "OpenSSL_add_all_algorithms" - will NEVER load the config file
```
Net::SSLeay::OPENSSL_add_all_algorithms_noconf();
#
# returns: no return value
```

NOTE: Please note that SSL_alert_* function have "SSL_" part stripped from their names.

ERR_clear_error

Clear the error queue.
```
Net::SSLeay::ERR_clear_error();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_clear_error.html
ERR_error_string

Generates a human-readable string representing the error code $error.
```
my $rv = Net::SSLeay::ERR_error_string($error);
# $error - (unsigned integer) error code
#
# returns: string
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_error_string.html
ERR_get_error

Returns the earliest error code from the thread's error queue and removes the entry. This function can be called repeatedly until there are no more error codes to return.
```
my $rv = Net::SSLeay::ERR_get_error();
#
# returns: (unsigned integer) error code
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_get_error.html
ERR_peek_error

Returns the earliest error code from the thread's error queue without modifying it.
```
my $rv = Net::SSLeay::ERR_peek_error();
#
# returns: (unsigned integer) error code
```
Check openssl doc http://www.openssl.org/docs/crypto/ERR_get_error.html

ERR_put_error

Adds an error code to the thread's error queue. It signals that the error of $reason code reason occurred in function $func of library $lib, in line number $line of $file.

Net::SSLeay::ERR_put_error($lib, $func, $reason, $file, $line);
# $lib - (integer) library id (check openssl/err.h for constants e.g. ERR_LIB_SSL)
# $func - (integer) function id (check openssl/ssl.h for constants e.g. SSL_F_SSL23_READ)
# $reason - (integer) reason id (check openssl/ssl.h for constants e.g. SSL_R_SSL_HANDSHAKE_FAILURE)
# $file - (string) file name
# $line - (integer) line number in $file
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/ERR_put_error.html and http://www.openssl.org/docs/crypto/err.html

alert_desc_string

Returns a two letter string as a short form describing the reason of the alert specified by value.
```
my $rv = Net::SSLeay::alert_desc_string($value);
# $value - (integer) allert id (check openssl/ssl.h for SSL3_AD_* and TLS1_AD_* constants)
#
# returns: description string (2 letters)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_alert_type_string.html

alert_desc_string_long

Returns a string describing the reason of the alert specified by value.

my $rv = Net::SSLeay::alert_desc_string_long($value);
# $value - (integer) allert id (check openssl/ssl.h for SSL3_AD_* and TLS1_AD_* constants)
#
# returns: description string

Check openssl doc http://www.openssl.org/docs/ssl/SSL_alert_type_string.html

alert_type_string

Returns a one letter string indicating the type of the alert specified by value.
```
my $rv = Net::SSLeay::alert_type_string($value);
# $value - (integer) allert id (check openssl/ssl.h for SSL3_AD_* and TLS1_AD_* constants)
#
# returns: string (1 letter)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_alert_type_string.html
alert_type_string_long

Returns a string indicating the type of the alert specified by value.
```
my $rv = Net::SSLeay::alert_type_string_long($value);
# $value - (integer) allert id (check openssl/ssl.h for SSL3_AD_* and TLS1_AD_* constants)
#
# returns: string
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_alert_type_string.html

SSLv2_method

Returns SSL_METHOD structure corresponding to SSLv2 method, the return value can be later used as a param of "CTX_new_with_method".
```
my $rv = Net::SSLeay::SSLv2_method();
#
# returns: value corresponding to openssl's SSL_METHOD structure (0 on failure)
```
SSLv3_method

Returns SSL_METHOD structure corresponding to SSLv3 method, the return value can be later used as a param of "CTX_new_with_method".
```
my $rv = Net::SSLeay::SSLv3_method();
#
# returns: value corresponding to openssl's SSL_METHOD structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_new.html
TLSv1_method

Returns SSL_METHOD structure corresponding to TLSv1 method, the return value can be later used as a param of "CTX_new_with_method".
```
my $rv = Net::SSLeay::TLSv1_method();
#
# returns: value corresponding to openssl's SSL_METHOD structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_new.html

ENGINE_load_builtin_engines

Load all bundled ENGINEs into memory and make them visible.
```
Net::SSLeay::ENGINE_load_builtin_engines();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/engine.html
ENGINE_register_all_complete

Register all loaded ENGINEs for every algorithm they collectively implement.
```
Net::SSLeay::ENGINE_register_all_complete();
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/engine.html

ENGINE_set_default

Set default engine to $e + set its flags to $flags.

my $rv = Net::SSLeay::ENGINE_set_default($e, $flags);
# $e - value corresponding to openssl's ENGINE structure
# $flags - (integer) engine flags
#          flags value can be made by bitwise "OR"ing:
#          0x0001 - ENGINE_METHOD_RSA
#          0x0002 - ENGINE_METHOD_DSA
#          0x0004 - ENGINE_METHOD_DH
#          0x0008 - ENGINE_METHOD_RAND
#          0x0010 - ENGINE_METHOD_ECDH
#          0x0020 - ENGINE_METHOD_ECDSA
#          0x0040 - ENGINE_METHOD_CIPHERS
#          0x0080 - ENGINE_METHOD_DIGESTS
#          0x0100 - ENGINE_METHOD_STORE
#          0x0200 - ENGINE_METHOD_PKEY_METHS
#          0x0400 - ENGINE_METHOD_PKEY_ASN1_METHS
#          Obvious all-or-nothing cases:
#          0xFFFF - ENGINE_METHOD_ALL
#          0x0000 - ENGINE_METHOD_NONE
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/engine.html

ENGINE_by_id

Get ENGINE by its identification $id.

my $rv = Net::SSLeay::ENGINE_by_id($id);
# $id - (string) engine identification e.g. "dynamic"
#
# returns: value corresponding to openssl's ENGINE structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/engine.html

EVP_PKEY_copy_parameters

Copies the parameters from key $from to key $to.

my $rv = Net::SSLeay::EVP_PKEY_copy_parameters($to, $from);
# $to - value corresponding to openssl's EVP_PKEY structure
# $from - value corresponding to openssl's EVP_PKEY structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/EVP_PKEY_cmp.html

EVP_PKEY_new

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Creates a new EVP_PKEY structure.
```
my $rv = Net::SSLeay::EVP_PKEY_new();
#
# returns: value corresponding to openssl's EVP_PKEY structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/EVP_PKEY_new.html
EVP_PKEY_free

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Free an allocated EVP_PKEY structure.
```
Net::SSLeay::EVP_PKEY_free($pkey);
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/EVP_PKEY_new.html
EVP_PKEY_assign_RSA

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Set the key referenced by $pkey to $key

NOTE: In accordance with the OpenSSL naming convention the $key assigned to the $pkey using the "1" functions must be freed as well as $pkey.
```
my $rv = Net::SSLeay::EVP_PKEY_assign_RSA($pkey, $key);
# $pkey - value corresponding to openssl's EVP_PKEY structure
# $key - value corresponding to openssl's RSA structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/crypto/EVP_PKEY_set1_RSA.html

EVP_PKEY_bits

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns the size of the key $pkey in bits.

my $rv = Net::SSLeay::EVP_PKEY_bits($pkey);
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: size in bits

EVP_PKEY_size

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns the maximum size of a signature in bytes. The actual signature may be smaller.
```
my $rv = Net::SSLeay::EVP_PKEY_size($pkey);
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: the maximum size in bytes
```
Check openssl doc http://www.openssl.org/docs/crypto/EVP_SignInit.html

EVP_PKEY_id

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-1.0.0

Returns $pkey type (integer value of corresponding NID).

my $rv = Net::SSLeay::EVP_PKEY_id($pkey);
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: (integer) key type

Example:

my $pubkey = Net::SSLeay::X509_get_pubkey($x509);
my $type = Net::SSLeay::EVP_PKEY_id($pubkey);
print Net::SSLeay::OBJ_nid2sn($type);             #prints e.g. 'rsaEncryption'

Check openssl doc http://www.openssl.org/docs/crypto/pem.html

PEM_read_bio_X509

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads PEM formated X509 certificate via given BIO structure.

my $rv = Net::SSLeay::PEM_read_bio_X509($bio);
# $bio - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509 structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'r');
my $x509 = Net::SSLeay::PEM_read_bio_X509($bio);
Net::SSLeay::BIO_free($bio);

PEM_read_bio_X509_REQ

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads PEM formated X509_REQ object via given BIO structure.

my $rv = Net::SSLeay::PEM_read_bio_X509_REQ($bio, $x=NULL, $cb=NULL, $u=NULL);
# $bio - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509_REQ structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'r');
my $x509_req = Net::SSLeay::PEM_read_bio_X509_REQ($bio);
Net::SSLeay::BIO_free($bio);

PEM_read_bio_DHparams

Reads DH structure from BIO.

my $rv = Net::SSLeay::PEM_read_bio_DHparams($bio);
# $bio - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's DH structure (0 on failure)

PEM_read_bio_X509_CRL

Reads X509_CRL structure from BIO.

my $rv = Net::SSLeay::PEM_read_bio_X509_CRL($bio);
# $bio - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509_CRL structure (0 on failure)

PEM_read_bio_PrivateKey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads PEM formated private key via given BIO structure.

my $rv = Net::SSLeay::PEM_read_bio_PrivateKey($bio, $cb, $data);
# $bio - value corresponding to openssl's BIO structure
# $cb - reference to perl callback function
# $data - data that will be passed to callback function (see examples below)
#
# returns: value corresponding to openssl's EVP_PKEY structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'r');
my $privkey = Net::SSLeay::PEM_read_bio_PrivateKey($bio); #ask for password if needed
Net::SSLeay::BIO_free($bio);

To use password you have the following options:

$privkey = Net::SSLeay::PEM_read_bio_PrivateKey($bio, \&callback_func); # use callback func for getting password
$privkey = Net::SSLeay::PEM_read_bio_PrivateKey($bio, \&callback_func, $data); # use callback_func + pass $data to callback_func
$privkey = Net::SSLeay::PEM_read_bio_PrivateKey($bio, undef, "secret"); # use password "secret"
$privkey = Net::SSLeay::PEM_read_bio_PrivateKey($bio, undef, "");       # use empty password

Callback function signature:

sub callback_func {
  my ($max_passwd_size, $rwflag, $data) = @_;
  # $max_passwd_size - maximum size of returned password (longer values will be discarded)
  # $rwflag - indicates whether we are loading (0) or storing (1) - for PEM_read_bio_PrivateKey always 0
  # $data - the data passed to PEM_read_bio_PrivateKey as 3rd parameter

  return "secret";
}

PEM_get_string_X509

NOTE: Does not exactly correspond to any low level API function

Converts/exports X509 certificate to string (PEM format).

Net::SSLeay::PEM_get_string_X509($x509);
# $x509 - value corresponding to openssl's X509 structure
#
# returns: string with $x509 in PEM format

PEM_get_string_PrivateKey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Converts public key $pk into PEM formated string (optionally protected with password).

my $rv = Net::SSLeay::PEM_get_string_PrivateKey($pk, $passwd, $enc_alg);
# $pk - value corresponding to openssl's EVP_PKEY structure
# $passwd - [optional] (string) password to use for key encryption
# $enc_alg - [optional] algorithm to use for key encryption (default: DES_CBC) - value corresponding to openssl's EVP_CIPHER structure
#
# returns: PEM formated string

Examples:

$pem_privkey = Net::SSLeay::PEM_get_string_PrivateKey($pk);
$pem_privkey = Net::SSLeay::PEM_get_string_PrivateKey($pk, "secret");
$pem_privkey = Net::SSLeay::PEM_get_string_PrivateKey($pk, "secret", Net::SSLeay::EVP_get_cipherbyname("DES-EDE3-CBC"));

PEM_get_string_X509_CRL

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Converts X509_CRL object $x509_crl into PEM formated string.

Net::SSLeay::PEM_get_string_X509_CRL($x509_crl);
# $x509_crl - value corresponding to openssl's X509_CRL structure
#
# returns: no return value

PEM_get_string_X509_REQ

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Converts X509_REQ object $x509_crl into PEM formated string.

Net::SSLeay::PEM_get_string_X509_REQ($x509_req);
# $x509_req - value corresponding to openssl's X509_REQ structure
#
# returns: no return value

d2i_X509_bio

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads DER formated X509 certificate via given BIO structure.

my $rv = Net::SSLeay::d2i_X509_bio($bp);
# $bp - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509 structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'rb');
my $x509 = Net::SSLeay::d2i_X509_bio($bio);
Net::SSLeay::BIO_free($bio);

Check openssl doc http://www.openssl.org/docs/crypto/d2i_X509.html

d2i_X509_CRL_bio

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads DER formated X509_CRL object via given BIO structure.

my $rv = Net::SSLeay::d2i_X509_CRL_bio($bp);
# $bp - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509_CRL structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'rb');
my $x509_crl = Net::SSLeay::d2i_X509_CRL_bio($bio);
Net::SSLeay::BIO_free($bio);

d2i_X509_REQ_bio

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads DER formated X509_REQ object via given BIO structure.

my $rv = Net::SSLeay::d2i_X509_REQ_bio($bp);
# $bp - value corresponding to openssl's BIO structure
#
# returns: value corresponding to openssl's X509_REQ structure (0 on failure)

Example:

my $bio = Net::SSLeay::BIO_new_file($filename, 'rb');
my $x509_req = Net::SSLeay::d2i_X509_REQ_bio($bio);
Net::SSLeay::BIO_free($bio);

P_PKCS12_load_file

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Loads X509 certificate + private key + certificates of CA chain (if present in PKCS12 file).

my ($privkey, $cert, @cachain) = Net::SSLeay::P_PKCS12_load_file($filename, $load_chain, $password);
# $filename - name of PKCS12 file
# $load_chain - [optional] whether load (1) or not(0) CA chain (default: 0)
# $password - [optional] password for private key
#
# returns: triplet ($privkey, $cert, @cachain)
#          $privkey - value corresponding to openssl's EVP_PKEY structure
#          $cert - value corresponding to openssl's X509 structure
#          @cachain - array of values corresponding to openssl's X509 structure (empty if no CA chain in PKCS12)

IMPORTANT NOTE: after you do the job you need to call X509_free() on $privkey + all members of @cachain and EVP_PKEY_free() on $privkey.

Examples:

my ($privkey, $cert) = Net::SSLeay::P_PKCS12_load_file($filename);
#or
my ($privkey, $cert) = Net::SSLeay::P_PKCS12_load_file($filename, 0, $password);
#or
my ($privkey, $cert, @cachain) = Net::SSLeay::P_PKCS12_load_file($filename, 1);
#or
my ($privkey, $cert, @cachain) = Net::SSLeay::P_PKCS12_load_file($filename, 1, $password);

#BEWARE: THIS IS WRONG - MEMORY LEAKS! (you cannot free @cachain items)
my ($privkey, $cert) = Net::SSLeay::P_PKCS12_load_file($filename, 1, $password);

d2i_SSL_SESSION

Transforms the external ASN1 representation of an SSL/TLS session, stored as binary data at location pp with length length, into an SSL_SESSION object.

??? (does this function really work?)
```
my $rv = Net::SSLeay::d2i_SSL_SESSION($a, $pp, $length);
# $a - value corresponding to openssl's SSL_SESSION structure
# $pp - pointer/buffer ???
# $length - ???
#
# returns: ???
```
Check openssl doc http://www.openssl.org/docs/ssl/d2i_SSL_SESSION.html
i2d_SSL_SESSION

Transforms the SSL_SESSION object in into the ASN1 representation and stores it into the memory location pointed to by pp. The length of the resulting ASN1 representation is returned.

??? (does this function really work?)
```
my $rv = Net::SSLeay::i2d_SSL_SESSION($in, $pp);
# $in - value corresponding to openssl's SSL_SESSION structure
# $pp - pointer/data ???
#
# returns: 1 on success, 0
```
Check openssl doc http://www.openssl.org/docs/ssl/d2i_SSL_SESSION.html

SESSION_new

Creates a new SSL_SESSION structure.

my $rv = Net::SSLeay::SESSION_new();
#
# returns: value corresponding to openssl's SSL_SESSION structure (0 on failure)

SESSION_free

Free an allocated SSL_SESSION structure.

Net::SSLeay::SESSION_free($ses);
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_free.html

SESSION_cmp

Compare two SSL_SESSION structures.

my $rv = Net::SSLeay::SESSION_cmp($sesa, $sesb);
# $sesa - value corresponding to openssl's SSL_SESSION structure
# $sesb - value corresponding to openssl's SSL_SESSION structure
#
# returns: 0 if the two structures are the same

NOTE: Not available in openssl 1.0 or later

SESSION_get_app_data

Can be used to get application defined value/data.

my $rv = Net::SSLeay::SESSION_get_app_data($ses);
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: string/buffer/pointer ???

SESSION_set_app_data

Can be used to set some application defined value/data.

my $rv = Net::SSLeay::SESSION_set_app_data($s, $a);
# $s - value corresponding to openssl's SSL_SESSION structure
# $a - (string/buffer/pointer ???) data
#
# returns: ???

SESSION_get_ex_data

Is used to retrieve the information for $idx from session $ses.

my $rv = Net::SSLeay::SESSION_get_ex_data($ses, $idx);
# $ses - value corresponding to openssl's SSL_SESSION structure
# $idx - (integer) index for application specific data
#
# returns: pointer to ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_ex_new_index.html

SESSION_set_ex_data

Is used to store application data at arg for idx into the session object.

my $rv = Net::SSLeay::SESSION_set_ex_data($ss, $idx, $data);
# $ss - value corresponding to openssl's SSL_SESSION structure
# $idx - (integer) ???
# $data - (pointer) ???
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_ex_new_index.html

SESSION_get_ex_new_index

Is used to register a new index for application specific data.

my $rv = Net::SSLeay::SESSION_get_ex_new_index($argl, $argp, $new_func, $dup_func, $free_func);
# $argl - (long) ???
# $argp - (pointer) ???
# $new_func - function pointer ??? (CRYPTO_EX_new *)
# $dup_func - function pointer ??? (CRYPTO_EX_dup *)
# $free_func - function pointer ??? (CRYPTO_EX_free *)
#
# returns: (integer) ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_ex_new_index.html

SESSION_get_master_key

NOTE: Does not exactly correspond to any low level API function

Returns 'master_key' value from SSL_SESSION structure $s

Net::SSLeay::SESSION_get_master_key($s);
# $s - value corresponding to openssl's SSL_SESSION structure
#
# returns: master key (binary data)

SESSION_set_master_key

Sets 'master_key' value for SSL_SESSION structure $s

Net::SSLeay::SESSION_set_master_key($s, $key);
# $s - value corresponding to openssl's SSL_SESSION structure
# $key - master key (binary data)
#
# returns: no return value

SESSION_get_time

Returns the time at which the session s was established. The time is given in seconds since 1.1.1970.
```
my $rv = Net::SSLeay::SESSION_get_time($s);
# $s - value corresponding to openssl's SSL_SESSION structure
#
# returns: timestamp (seconds since 1.1.1970)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_time.html
get_time

Technically the same functionality as "SESSION_get_time".
```
my $rv = Net::SSLeay::get_time($s);
```
SESSION_get_timeout

Returns the timeout value set for session $s in seconds.
```
my $rv = Net::SSLeay::SESSION_get_timeout($s);
# $s - value corresponding to openssl's SSL_SESSION structure
#
# returns: timeout (in seconds)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_time.html
get_timeout

Technically the same functionality as "SESSION_get_timeout".
```
my $rv = Net::SSLeay::get_timeout($s);
```

SESSION_print

NOTE: Does not exactly correspond to any low level API function

Prints session details (e.g. protocol version, ciprher, session-id ...) to BIO.

my $rv = Net::SSLeay::SESSION_print($fp, $ses);
# $fp - value corresponding to openssl's BIO structure
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: 1 on success, 0 on failure

You have to use necessary BIO functions like this:

# let us have $ssl corresponding to openssl's SSL structure
my $ses = Net::SSLeay::get_session($ssl);
my $bio = Net::SSLeay::BIO_new(&Net::SSLeay::BIO_s_mem);
Net::SSLeay::SESSION_print($bio, $ses);
print Net::SSLeay::BIO_read($bio);

SESSION_print_fp

Prints session details (e.g. protocol version, ciprher, session-id ...) to file handle.

my $rv = Net::SSLeay::SESSION_print_fp($fp, $ses);
# $fp - perl file handle
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: 1 on success, 0 on failure

Example:

# let us have $ssl corresponding to openssl's SSL structure
my $ses = Net::SSLeay::get_session($ssl);
open my $fh, ">", "output.txt";
Net::SSLeay::SESSION_print_fp($fh,$ses);

SESSION_set_time

Replaces the creation time of the session s with the chosen value $t (seconds since 1.1.1970).
```
my $rv = Net::SSLeay::SESSION_set_time($ses, $t);
# $ses - value corresponding to openssl's SSL_SESSION structure
# $t - time value
#
# returns: 1 on success
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_time.html
set_time

Technically the same functionality as "SESSION_set_time".
```
my $rv = Net::SSLeay::set_time($ses, $t);
```

SESSION_set_timeout

Sets the timeout value for session s in seconds to $t.

my $rv = Net::SSLeay::SESSION_set_timeout($s, $t);
# $s - value corresponding to openssl's SSL_SESSION structure
# $t - timeout (in seconds)
#
# returns: 1 on success

Check openssl doc http://www.openssl.org/docs/ssl/SSL_SESSION_get_time.html

set_timeout

Technically the same functionality as "SESSION_set_timeout".
```
my $rv = Net::SSLeay::set_timeout($ses, $t);
```

NOTE: Please note that the function described in this chapter have "SSL_" part stripped from their original openssl names.

CTX_add_client_CA

Adds the CA name extracted from $cacert to the list of CAs sent to the client when requesting a client certificate for $ctx.
```
my $rv = Net::SSLeay::CTX_add_client_CA($ctx, $cacert);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $cacert - value corresponding to openssl's X509 structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_client_CA_list.html

CTX_add_extra_chain_cert

Adds the certificate $x509 to the certificate chain presented together with the certificate. Several certificates can be added one after the other.

my $rv = Net::SSLeay::CTX_add_extra_chain_cert($ctx, $x509);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $x509 - value corresponding to openssl's X509 structure
#
# returns: 1 on success, check out the error stack to find out the reason for failure otherwise

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_add_extra_chain_cert.html

CTX_add_session

Adds the session $ses to the context $ctx.

my $rv = Net::SSLeay::CTX_add_session($ctx, $ses);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_add_session.html

CTX_callback_ctrl

??? (more info needed)

my $rv = Net::SSLeay::CTX_callback_ctrl($ctx, $cmd, $fp);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $cmd - (integer) command id
# $fp - (function pointer) ???
#
# returns: ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_ctrl.html

CTX_check_private_key

Checks the consistency of a private key with the corresponding certificate loaded into $ctx.

my $rv = Net::SSLeay::CTX_check_private_key($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_ctrl

Internal handling function for SSL_CTX objects.

BEWARE: openssl doc says: This function should never be called directly!

my $rv = Net::SSLeay::CTX_ctrl($ctx, $cmd, $larg, $parg);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $cmd - (integer) command id
# $larg - (integer) long ???
# $parg - (string/pointer) ???
#
# returns: (long) result of given command ???

#valid $cmd values
 1 - SSL_CTRL_NEED_TMP_RSA
 2 - SSL_CTRL_SET_TMP_RSA
 3 - SSL_CTRL_SET_TMP_DH
 4 - SSL_CTRL_SET_TMP_ECDH
 5 - SSL_CTRL_SET_TMP_RSA_CB
 6 - SSL_CTRL_SET_TMP_DH_CB
 7 - SSL_CTRL_SET_TMP_ECDH_CB
 8 - SSL_CTRL_GET_SESSION_REUSED
 9 - SSL_CTRL_GET_CLIENT_CERT_REQUEST
10 - SSL_CTRL_GET_NUM_RENEGOTIATIONS
11 - SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS
12 - SSL_CTRL_GET_TOTAL_RENEGOTIATIONS
13 - SSL_CTRL_GET_FLAGS
14 - SSL_CTRL_EXTRA_CHAIN_CERT
15 - SSL_CTRL_SET_MSG_CALLBACK
16 - SSL_CTRL_SET_MSG_CALLBACK_ARG
17 - SSL_CTRL_SET_MTU
20 - SSL_CTRL_SESS_NUMBER
21 - SSL_CTRL_SESS_CONNECT
22 - SSL_CTRL_SESS_CONNECT_GOOD
23 - SSL_CTRL_SESS_CONNECT_RENEGOTIATE
24 - SSL_CTRL_SESS_ACCEPT
25 - SSL_CTRL_SESS_ACCEPT_GOOD
26 - SSL_CTRL_SESS_ACCEPT_RENEGOTIATE
27 - SSL_CTRL_SESS_HIT
28 - SSL_CTRL_SESS_CB_HIT
29 - SSL_CTRL_SESS_MISSES
30 - SSL_CTRL_SESS_TIMEOUTS
31 - SSL_CTRL_SESS_CACHE_FULL
32 - SSL_CTRL_OPTIONS
33 - SSL_CTRL_MODE
40 - SSL_CTRL_GET_READ_AHEAD
41 - SSL_CTRL_SET_READ_AHEAD
42 - SSL_CTRL_SET_SESS_CACHE_SIZE
43 - SSL_CTRL_GET_SESS_CACHE_SIZE
44 - SSL_CTRL_SET_SESS_CACHE_MODE
45 - SSL_CTRL_GET_SESS_CACHE_MODE
50 - SSL_CTRL_GET_MAX_CERT_LIST
51 - SSL_CTRL_SET_MAX_CERT_LIST
52 - SSL_CTRL_SET_MAX_SEND_FRAGMENT
53 - SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
54 - SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
55 - SSL_CTRL_SET_TLSEXT_HOSTNAME
56 - SSL_CTRL_SET_TLSEXT_DEBUG_CB
57 - SSL_CTRL_SET_TLSEXT_DEBUG_ARG
58 - SSL_CTRL_GET_TLSEXT_TICKET_KEYS
59 - SSL_CTRL_SET_TLSEXT_TICKET_KEYS
60 - SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT
61 - SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB
62 - SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB_ARG
63 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB
64 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB_ARG
65 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_TYPE
66 - SSL_CTRL_GET_TLSEXT_STATUS_REQ_EXTS
67 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_EXTS
68 - SSL_CTRL_GET_TLSEXT_STATUS_REQ_IDS
69 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_IDS
70 - SSL_CTRL_GET_TLSEXT_STATUS_REQ_OCSP_RESP
71 - SSL_CTRL_SET_TLSEXT_STATUS_REQ_OCSP_RESP
72 - SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB
73 - DTLS_CTRL_GET_TIMEOUT
74 - DTLS_CTRL_HANDLE_TIMEOUT
75 - DTLS_CTRL_LISTEN
76 - SSL_CTRL_GET_RI_SUPPORT
77 - SSL_CTRL_CLEAR_OPTIONS
78 - SSL_CTRL_CLEAR_MODE

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_ctrl.html

CTX_flush_sessions

Causes a run through the session cache of $ctx to remove sessions expired at time $tm.

Net::SSLeay::CTX_flush_sessions($ctx, $tm);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $tm - specifies the time which should be used for the expiration test (seconds since 1.1.1970)
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_flush_sessions.html

CTX_free

Free an allocated SSL_CTX object.

Net::SSLeay::CTX_free($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_free.html

CTX_get_app_data

Can be used to get application defined value/data.

my $rv = Net::SSLeay::CTX_get_app_data($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: string/buffer/pointer ???

CTX_set_app_data

Can be used to set some application defined value/data.

my $rv = Net::SSLeay::CTX_set_app_data($ctx, $arg);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $arg - (string/buffer/pointer ???) data
#
# returns: ???

CTX_get_cert_store

Returns the current certificate verification storage.

my $rv = Net::SSLeay::CTX_get_cert_store($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's X509_STORE structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cert_store.html

CTX_get_client_CA_list

Returns the list of client CAs explicitly set for $ctx using "CTX_set_client_CA_list".

my $rv = Net::SSLeay::CTX_get_client_CA_list($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's X509_NAME_STACK structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_client_CA_list.html

CTX_get_ex_data

Is used to retrieve the information for index $idx from $ctx.

my $rv = Net::SSLeay::CTX_get_ex_data($ssl, $idx);
# $ssl - value corresponding to openssl's SSL_CTX structure
# $idx - (integer) index for application specific data
#
# returns: pointer to ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_ex_new_index.html

CTX_get_ex_new_index

Is used to register a new index for application specific data.

my $rv = Net::SSLeay::CTX_get_ex_new_index($argl, $argp, $new_func, $dup_func, $free_func);
# $argl - (long) ???
# $argp - (pointer) ???
# $new_func - function pointer ??? (CRYPTO_EX_new *)
# $dup_func - function pointer ??? (CRYPTO_EX_dup *)
# $free_func - function pointer ??? (CRYPTO_EX_free *)
#
# returns: (integer) ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_ex_new_index.html

CTX_get_mode

Returns the mode set for ctx.

my $rv = Net::SSLeay::CTX_get_mode($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: mode (bitmask)

#to decode the return value (bitmask) use:
0x00000001 corresponds to SSL_MODE_ENABLE_PARTIAL_WRITE
0x00000002 corresponds to SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER
0x00000004 corresponds to SSL_MODE_AUTO_RETRY
0x00000008 corresponds to SSL_MODE_NO_AUTO_CHAIN
0x00000010 corresponds to SSL_MODE_RELEASE_BUFFERS
(note: some of the bits might not be supported by older openssl versions)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_mode.html

CTX_set_mode

Adds the mode set via bitmask in $mode to $ctx. Options already set before are not cleared.
```
my $rv = Net::SSLeay::CTX_set_mode($ctx, $mode);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $mode - mode bitmask
#
# returns: the new mode bitmask after adding $mode
```
For bitmask details see "CTX_get_mode" (above).

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_mode.html

CTX_get_options

Returns the options (bitmask) set for $ctx.

my $rv = Net::SSLeay::CTX_get_options($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: options (bitmask)

#to decode the return value (bitmask) use:
0x00000001 corresponds to SSL_OP_MICROSOFT_SESS_ID_BUG
0x00000002 corresponds to SSL_OP_NETSCAPE_CHALLENGE_BUG
0x00000004 corresponds to SSL_OP_LEGACY_SERVER_CONNECT
0x00000008 corresponds to SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
0x00000010 corresponds to SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG
0x00000020 corresponds to SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER
0x00000040 corresponds to SSL_OP_MSIE_SSLV2_RSA_PADDING
0x00000080 corresponds to SSL_OP_SSLEAY_080_CLIENT_DH_BUG
0x00000100 corresponds to SSL_OP_TLS_D5_BUG
0x00000200 corresponds to SSL_OP_TLS_BLOCK_PADDING_BUG
0x00000800 corresponds to SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
0x80000FFF corresponds to SSL_OP_ALL
0x00001000 corresponds to SSL_OP_NO_QUERY_MTU
0x00002000 corresponds to SSL_OP_COOKIE_EXCHANGE
0x00004000 corresponds to SSL_OP_NO_TICKET
0x00008000 corresponds to SSL_OP_CISCO_ANYCONNECT
0x00010000 corresponds to SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
0x00020000 corresponds to SSL_OP_NO_COMPRESSION
0x00040000 corresponds to SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
0x00080000 corresponds to SSL_OP_SINGLE_ECDH_USE
0x00100000 corresponds to SSL_OP_SINGLE_DH_USE
0x00200000 corresponds to SSL_OP_EPHEMERAL_RSA
0x00400000 corresponds to SSL_OP_CIPHER_SERVER_PREFERENCE
0x00800000 corresponds to SSL_OP_TLS_ROLLBACK_BUG
0x01000000 corresponds to SSL_OP_NO_SSLv2
0x02000000 corresponds to SSL_OP_NO_SSLv3
0x04000000 corresponds to SSL_OP_NO_TLSv1
0x08000000 corresponds to SSL_OP_PKCS1_CHECK_1
0x10000000 corresponds to SSL_OP_PKCS1_CHECK_2
0x20000000 corresponds to SSL_OP_NETSCAPE_CA_DN_BUG
0x40000000 corresponds to SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG
0x80000000 corresponds to SSL_OP_CRYPTOPRO_TLSEXT_BUG
(note: some of the bits might not be supported by older openssl versions)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_options.html

CTX_set_options

Adds the options set via bitmask in $options to ctx. Options already set before are not cleared.
```
Net::SSLeay::CTX_set_options($ctx, $options);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $options - options bitmask
#
# returns: the new options bitmask after adding $options
```
For bitmask details see "CTX_get_options" (above).

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_options.html

CTX_get_quiet_shutdown

Returns the 'quiet shutdown' setting of $ctx.

my $rv = Net::SSLeay::CTX_get_quiet_shutdown($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: (integer) the current setting

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_quiet_shutdown.html

CTX_get_read_ahead

my $rv = Net::SSLeay::CTX_get_read_ahead($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: (integer) read_ahead value

CTX_get_session_cache_mode

Returns the currently used cache mode (bitmask).

my $rv = Net::SSLeay::CTX_get_session_cache_mode($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: mode (bitmask)

#to decode the return value (bitmask) use:
0x0000 corresponds to SSL_SESS_CACHE_OFF
0x0001 corresponds to SSL_SESS_CACHE_CLIENT
0x0002 corresponds to SSL_SESS_CACHE_SERVER
0x0080 corresponds to SSL_SESS_CACHE_NO_AUTO_CLEAR
0x0100 corresponds to SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
0x0200 corresponds to SSL_SESS_CACHE_NO_INTERNAL_STORE
(note: some of the bits might not be supported by older openssl versions)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_session_cache_mode.html

CTX_set_session_cache_mode

Enables/disables session caching by setting the operational mode for $ctx to $mode.
```
my $rv = Net::SSLeay::CTX_set_session_cache_mode($ctx, $mode);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $mode - mode (bitmask)
#
# returns: previously set cache mode
```
For bitmask details see "CTX_get_session_cache_mode" (above).

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_session_cache_mode.html
CTX_get_timeout

Returns the currently set timeout value for $ctx.
```
my $rv = Net::SSLeay::CTX_get_timeout($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: timeout in seconds
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_timeout.html
CTX_get_verify_depth

Returns the verification depth limit currently set in $ctx. If no limit has been explicitly set, -1 is returned and the default value will be used.",
```
my $rv = Net::SSLeay::CTX_get_verify_depth($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: depth limit currently set in $ctx, -1 if no limit has been explicitly set
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_verify_mode.html

CTX_get_verify_mode

Returns the verification mode (bitmask) currently set in $ctx.

my $rv = Net::SSLeay::CTX_get_verify_mode($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: mode (bitmask)

#to decode the return value (bitmask) use:
0x00 corresponds to SSL_VERIFY_NONE
0x01 corresponds to SSL_VERIFY_PEER
0x02 corresponds to SSL_VERIFY_FAIL_IF_NO_PEER_CERT
0x04 corresponds to SSL_VERIFY_CLIENT_ONCE
(note: some of the bits might not be supported by older openssl versions)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_verify_mode.html

CTX_set_verify

Sets the verification flags for $ctx to be $mode and specifies the verify_callback function to be used.
```
Net::SSLeay::CTX_set_verify($ctx, $mode, $callback);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $mode - mode (bitmask)
# $callback - [optional] reference to perl callback function
#
# returns: no return value
```
For bitmask details see "CTX_get_verify_mode" (above).

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_verify.html

CTX_load_verify_locations

Specifies the locations for $ctx, at which CA certificates for verification purposes are located. The certificates available via $CAfile and $CApath are trusted.

my $rv = Net::SSLeay::CTX_load_verify_locations($ctx, $CAfile, $CApath);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $CAfile - (string) file of CA certificates in PEM format, the file can contain several CA certificates (or '')
# $CApath - (string) directory containing CA certificates in PEM format (or '')
#
# returns: 1 on success, 0 on failure (check the error stack to find out the reason)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_load_verify_locations.html

CTX_need_tmp_RSA

Return the result of SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL)

my $rv = Net::SSLeay::CTX_need_tmp_RSA($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: result of SSL_CTRL_NEED_TMP_RSA command

CTX_new

The same as "CTX_v23_new"

my $rv = Net::SSLeay::CTX_new();
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_new.html

CTX_v2_new

Creates a new SSL_CTX object - based on SSLv2_method() - as framework to establish TLS/SSL enabled connections.
```
my $rv = Net::SSLeay::CTX_v2_new();
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)
```
CTX_v23_new

Creates a new SSL_CTX object - based on SSLv23_method() - as framework to establish TLS/SSL enabled connections.
```
my $rv = Net::SSLeay::CTX_v23_new();
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)
```
CTX_v3_new

Creates a new SSL_CTX object - based on SSLv3_method() - as framework to establish TLS/SSL enabled connections.
```
my $rv = Net::SSLeay::CTX_v3_new();
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)
```
CTX_tlsv1_new

Creates a new SSL_CTX object - based on TLSv1_method() - as framework to establish TLS/SSL enabled connections.
```
my $rv = Net::SSLeay::CTX_tlsv1_new();
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)
```

CTX_new_with_method

Creates a new SSL_CTX object based on $meth method

my $rv = Net::SSLeay::CTX_new_with_method($meth);
# $meth - value corresponding to openssl's SSL_METHOD structure
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)

#example
my $ctx = Net::SSLeay::CTX_new_with_method(&Net::SSLeay::TLSv1_method);

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_new.html

CTX_remove_session

Removes the session $ses from the context $ctx.

my $rv = Net::SSLeay::CTX_remove_session($ctx, $ses);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_add_session.html

CTX_sess_accept

my $rv = Net::SSLeay::CTX_sess_accept($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of started SSL/TLS handshakes in server mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_accept_good

my $rv = Net::SSLeay::CTX_sess_accept_good($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of successfully established SSL/TLS sessions in server mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_accept_renegotiate

my $rv = Net::SSLeay::CTX_sess_accept_renegotiate($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of start renegotiations in server mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_cache_full

my $rv = Net::SSLeay::CTX_sess_cache_full($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of sessions that were removed because the maximum session cache size was exceeded

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_cb_hits

my $rv = Net::SSLeay::CTX_sess_cb_hits($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of successfully retrieved sessions from the external session cache in server mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_connect

my $rv = Net::SSLeay::CTX_sess_connect($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of started SSL/TLS handshakes in client mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_connect_good

my $rv = Net::SSLeay::CTX_sess_connect_good($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of successfully established SSL/TLS sessions in client mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_connect_renegotiate

my $rv = Net::SSLeay::CTX_sess_connect_renegotiate($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of start renegotiations in client mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_get_cache_size

Returns the currently valid session cache size.
```
my $rv = Net::SSLeay::CTX_sess_get_cache_size($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: current size
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_set_cache_size.html

CTX_sess_hits

my $rv = Net::SSLeay::CTX_sess_hits($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of successfully reused sessions

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_misses

my $rv = Net::SSLeay::CTX_sess_misses($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of sessions proposed by clients that were not found in the internal session cache in server mode

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_number

my $rv = Net::SSLeay::CTX_sess_number($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: current number of sessions in the internal session cache

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sess_set_cache_size

Sets the size of the internal session cache of context $ctx to $size.

Net::SSLeay::CTX_sess_set_cache_size($ctx, $size);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $size - cache size (0 = unlimited)
#
# returns: previously valid size

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_set_cache_size.html

CTX_sess_timeouts

Returns the number of sessions proposed by clients and either found in the internal or external session cache in server mode, but that were invalid due to timeout. These sessions are not included in the SSL_CTX_sess_hits count.
```
my $rv = Net::SSLeay::CTX_sess_timeouts($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: number of sessions
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sess_number.html

CTX_sessions

Returns a pointer to the lhash databases containing the internal session cache for ctx.

my $rv = Net::SSLeay::CTX_sessions($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's LHASH structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_sessions.html

CTX_set1_param

Applies X509 verification parameters $vpm on $ctx

my $rv = Net::SSLeay::CTX_set1_param($ctx, $vpm);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $vpm - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

CTX_set_cert_store

Sets/replaces the certificate verification storage of $ctx to/with $store.

Net::SSLeay::CTX_set_cert_store($ctx, $store);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $store - value corresponding to openssl's X509_STORE structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cert_store.html

CTX_set_cert_verify_callback

Sets the verification callback function for $ctx. SSL objects that are created from $ctx inherit the setting valid at the time when Net::SSLeay::new($ctx) is called.

Net::SSLeay::CTX_set_cert_verify_callback($ctx, $func, $data);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $func - perl reference to callback function
# $data - [optional] data that will be passed to callback function when invoked
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cert_verify_callback.html

CTX_set_cipher_list

Sets the list of available ciphers for $ctx using the control string $str. The list of ciphers is inherited by all ssl objects created from $ctx.
```
my $rv = Net::SSLeay::CTX_set_cipher_list($s, $str);
# $s - value corresponding to openssl's SSL_CTX structure
# $str - (string) cipher list e.g. '3DES:+RSA'
#
# returns: 1 if any cipher could be selected and 0 on complete failure
```
The format of $str is described in http://www.openssl.org/docs/apps/ciphers.html

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cipher_list.html

CTX_set_client_CA_list

Sets the list of CAs sent to the client when requesting a client certificate for $ctx.

Net::SSLeay::CTX_set_client_CA_list($ctx, $list);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $list - value corresponding to openssl's X509_NAME_STACK structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_client_CA_list.html

CTX_set_default_passwd_cb

Sets the default password callback called when loading/storing a PEM certificate with encryption.
```
Net::SSLeay::CTX_set_default_passwd_cb($ctx, $func);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $func - perl reference to callback function
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_default_passwd_cb.html

CTX_set_default_passwd_cb_userdata

Sets a pointer to userdata which will be provided to the password callback on invocation.

Net::SSLeay::CTX_set_default_passwd_cb_userdata($ctx, $userdata);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $userdata - data that will be passed to callback function when invoked
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_default_passwd_cb.html

CTX_set_default_verify_paths

??? (more info needed)

my $rv = Net::SSLeay::CTX_set_default_verify_paths($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: 1 on success, 0 on failure

CTX_set_ex_data

Is used to store application data at $data for $idx into the $ctx object.

my $rv = Net::SSLeay::CTX_set_ex_data($ssl, $idx, $data);
# $ssl - value corresponding to openssl's SSL_CTX structure
# $idx - (integer) ???
# $data - (pointer) ???
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_ex_new_index.html

CTX_set_purpose

my $rv = Net::SSLeay::CTX_set_purpose($s, $purpose);
# $s - value corresponding to openssl's SSL_CTX structure
# $purpose - (integer) purpose identifier
#
# returns: 1 on success, 0 on failure

#avainable purpose identifier
1 - X509_PURPOSE_SSL_CLIENT
2 - X509_PURPOSE_SSL_SERVER
3 - X509_PURPOSE_NS_SSL_SERVER
4 - X509_PURPOSE_SMIME_SIGN
5 - X509_PURPOSE_SMIME_ENCRYPT
6 - X509_PURPOSE_CRL_SIGN
7 - X509_PURPOSE_ANY
8 - X509_PURPOSE_OCSP_HELPER
9 - X509_PURPOSE_TIMESTAMP_SIGN

#or use corresponding constants
$purpose = &Net::SSLeay::X509_PURPOSE_SSL_CLIENT;
...
$purpose = &Net::SSLeay::X509_PURPOSE_TIMESTAMP_SIGN;

CTX_set_quiet_shutdown

Sets the 'quiet shutdown' flag for $ctx to be mode. SSL objects created from $ctx inherit the mode valid at the time Net::SSLeay::new($ctx) is called.
```
Net::SSLeay::CTX_set_quiet_shutdown($ctx, $mode);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $mode - 0 or 1
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_quiet_shutdown.html

CTX_set_read_ahead

my $rv = Net::SSLeay::CTX_set_read_ahead($ctx, $val);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $val - read_ahead value to be set
#
# returns: the original read_ahead value

CTX_set_session_id_context

Sets the context $sid_ctx of length $sid_ctx_len within which a session can be reused for the $ctx object.

my $rv = Net::SSLeay::CTX_set_session_id_context($ctx, $sid_ctx, $sid_ctx_len);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $sid_ctx - data buffer
# $sid_ctx_len - lenght of data in $sid_ctx
#
# returns: 1 on success, 0 on failure (the error is logged to the error stack)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_session_id_context.html

CTX_set_ssl_version

Sets a new default TLS/SSL method for SSL objects newly created from this $ctx. SSL objects already created with Net::SSLeay::new($ctx) are not affected, except when Net::SSLeay:clear($ssl) is being called.
```
my $rv = Net::SSLeay::CTX_set_ssl_version($ctx, $meth);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $meth - value corresponding to openssl's SSL_METHOD structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_ssl_version.html
CTX_set_timeout

Sets the timeout for newly created sessions for $ctx to $t. The timeout value $t must be given in seconds.
```
my $rv = Net::SSLeay::CTX_set_timeout($ctx, $t);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $t - timeout in seconds
#
# returns: previously set timeout value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_timeout.html

CTX_set_tmp_dh

Sets DH parameters to be used to be $dh. The key is inherited by all ssl objects created from $ctx.

my $rv = Net::SSLeay::CTX_set_tmp_dh($ctx, $dh);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $dh - value corresponding to openssl's DH structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_dh_callback.html

CTX_set_tmp_dh_callback

Sets the callback function for $ctx to be used when a DH parameters are required to $tmp_dh_callback.
```
Net::SSLeay::CTX_set_tmp_dh_callback($ctx, $tmp_dh_callback);
# $ctx - value corresponding to openssl's SSL_CTX structure
# tmp_dh_callback - (function pointer) ???
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_dh_callback.html

CTX_set_tmp_rsa

Sets the temporary/ephemeral RSA key to be used to be $rsa.

my $rv = Net::SSLeay::CTX_set_tmp_rsa($ctx, $rsa);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $rsa - value corresponding to openssl's RSA structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_rsa_callback.html

CTX_set_tmp_rsa_callback

Sets the callback function for ctx to be used when a temporary/ephemeral RSA key is required to $tmp_rsa_callback.

??? (does this function really work?)
```
Net::SSLeay::CTX_set_tmp_rsa_callback($ctx, $tmp_rsa_callback);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $tmp_rsa_callback - (function pointer) ???
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_rsa_callback.html

CTX_set_trust

my $rv = Net::SSLeay::CTX_set_trust($s, $trust);
# $s - value corresponding to openssl's SSL_CTX structure
# $trust - (integer) trust identifier
#
# returns: the original value

#available trust identifiers
1 - X509_TRUST_COMPAT
2 - X509_TRUST_SSL_CLIENT
3 - X509_TRUST_SSL_SERVER
4 - X509_TRUST_EMAIL
5 - X509_TRUST_OBJECT_SIGN
6 - X509_TRUST_OCSP_SIGN
7 - X509_TRUST_OCSP_REQUEST
8 - X509_TRUST_TSA

#or use corresponding constants
$trust = &Net::SSLeay::X509_TRUST_COMPAT;
...
$trust = &Net::SSLeay::X509_TRUST_TSA;

CTX_set_verify_depth

Sets the maximum depth for the certificate chain verification that shall be allowed for ctx.
```
Net::SSLeay::CTX_set_verify_depth($ctx, $depth);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $depth - max. depth
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_verify.html

CTX_use_PKCS12_file

Adds the certificate and private key from PKCS12 file $p12filename to $ctx.

my $rv = Net::SSLeay::CTX_use_PKCS12_file($ctx, $p12filename, $password);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $p12filename - (string) filename
# $password - (string) password to decrypt private key
#
# returns: 1 on success, 0 on failure

CTX_use_PrivateKey

Adds the private key $pkey to $ctx.

my $rv = Net::SSLeay::CTX_use_PrivateKey($ctx, $pkey);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_use_PrivateKey_file

Adds the first private key found in $file to $ctx.

my $rv = Net::SSLeay::CTX_use_PrivateKey_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_use_RSAPrivateKey

Adds the RSA private key $rsa to $ctx.

my $rv = Net::SSLeay::CTX_use_RSAPrivateKey($ctx, $rsa);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $rsa - value corresponding to openssl's RSA structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_use_RSAPrivateKey_file

Adds the first RSA private key found in $file to $ctx.

my $rv = Net::SSLeay::CTX_use_RSAPrivateKey_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

CTX_use_certificate

Loads the certificate $x into $ctx

my $rv = Net::SSLeay::CTX_use_certificate($ctx, $x);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $x - value corresponding to openssl's X509 structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_use_certificate_chain_file

Loads a certificate chain from $file into $ctx. The certificates must be in PEM format and must be sorted starting with the subject's certificate (actual client or server certificate), followed by intermediate CA certificates if applicable, and ending at the highest level (root) CA.
```
my $rv = Net::SSLeay::CTX_use_certificate_chain_file($ctx, $file);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $file - (string) file name
#
# returns: 1 on success, otherwise check out the error stack to find out the reason
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

CTX_use_certificate_file

Loads the first certificate stored in $file into $ctx.

my $rv = Net::SSLeay::CTX_use_certificate_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

NOTE: Please note that the function described in this chapter have "SSL_" part stripped from their original openssl names.

new

Creates a new SSL structure which is needed to hold the data for a TLS/SSL connection. The new structure inherits the settings of the underlying context $ctx: connection method (SSLv2/v3/TLSv1), options, verification settings, timeout settings.
```
my $rv = Net::SSLeay::new($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's SSL structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_new.html
accept

Waits for a TLS/SSL client to initiate the TLS/SSL handshake. The communication channel must already have been set and assigned to the ssl by setting an underlying BIO.
```
my $rv = Net::SSLeay::accept($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 = success, 0 = handshake not successfull, <0 = fatal error during handshake
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_accept.html
add_client_CA

Adds the CA name extracted from cacert to the list of CAs sent to the client when requesting a client certificate for the chosen ssl, overriding the setting valid for ssl's SSL_CTX object.
```
my $rv = Net::SSLeay::add_client_CA($ssl, $x);
# $ssl - value corresponding to openssl's SSL structure
# $x - value corresponding to openssl's X509 structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_client_CA_list.html

callback_ctrl

??? (more info needed)

my $rv = Net::SSLeay::callback_ctrl($ssl, $cmd, $fp);
# $ssl - value corresponding to openssl's SSL structure
# $cmd - (integer) command id
# $fp - (function pointer) ???
#
# returns: ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_ctrl.html

check_private_key

Checks the consistency of a private key with the corresponding certificate loaded into $ssl

my $rv = Net::SSLeay::check_private_key($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

clear

Reset SSL object to allow another connection.
```
Net::SSLeay::clear($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_clear.html

connect

Initiate the TLS/SSL handshake with an TLS/SSL server.

my $rv = Net::SSLeay::connect($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 = success, 0 = handshake not successfull, <0 = fatal error during handshake

Check openssl doc http://www.openssl.org/docs/ssl/SSL_connect.html

copy_session_id

Copies the session structure fro $from to $to (+ also the private key and certificate associated with $from).

Net::SSLeay::copy_session_id($to, $from);
# $to - value corresponding to openssl's SSL structure
# $from - value corresponding to openssl's SSL structure
#
# returns: no return value

ctrl

Internal handling function for SSL objects.

BEWARE: openssl doc says: This function should never be called directly!

my $rv = Net::SSLeay::ctrl($ssl, $cmd, $larg, $parg);
# $ssl - value corresponding to openssl's SSL structure
# $cmd - (integer) command id
# $larg - (integer) long ???
# $parg - (string/pointer) ???
#
# returns: (long) result of given command ???

For more details about valid $cmd values check "CTX_ctrl".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_ctrl.html

do_handshake

Will wait for a SSL/TLS handshake to take place. If the connection is in client mode, the handshake will be started. The handshake routines may have to be explicitly set in advance using either SSL_set_connect_state or SSL_set_accept_state(3).
```
my $rv = Net::SSLeay::do_handshake($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 = success, 0 = handshake not successfull, <0 = fatal error during handshake
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_do_handshake.html

dup

Returns a duplicate of $ssl.

my $rv = Net::SSLeay::dup($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL structure (0 on failure)

free

Free an allocated SSL structure.

Net::SSLeay::free($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_free.html

get_SSL_CTX

Returns a pointer to the SSL_CTX object, from which $ssl was created with Net::SSLeay::new.

my $rv = Net::SSLeay::get_SSL_CTX($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL_CTX structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_SSL_CTX.html

get_app_data

Can be used to get application defined value/data.

my $rv = Net::SSLeay::get_app_data($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: string/buffer/pointer ???

set_app_data

Can be used to set some application defined value/data.

my $rv = Net::SSLeay::set_app_data($ssl, $arg);
# $ssl - value corresponding to openssl's SSL structure
# $arg - (string/buffer/pointer ???) data
#
# returns: ???

get_certificate

Gets X509 certificate from an established SSL connection.

my $rv = Net::SSLeay::get_certificate($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's X509 structure (0 on failure)

get_cipher

Obtains the name of the currently used cipher.

my $rv = Net::SSLeay::get_cipher($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (string) cipher name e.g. 'DHE-RSA-AES256-SHA' or '', when no session has been established.

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_current_cipher.html

get_cipher_bits

Obtain the number of secret/algorithm bits used.
```
my $rv = Net::SSLeay::get_cipher_bits($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: number of secret bits used by current cipher
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_current_cipher.html and http://www.openssl.org/docs/ssl/SSL_CIPHER_get_name.html

get_cipher_list

Returns the name (string) of the SSL_CIPHER listed for $ssl with priority $n.

my $rv = Net::SSLeay::get_cipher_list($ssl, $n);
# $ssl - value corresponding to openssl's SSL structure
# $n - (integer) priority
#
# returns: (string) cipher name e.g. 'EDH-DSS-DES-CBC3-SHA' or '' in case of error

Call Net::SSLeay::get_cipher_list with priority starting from 0 to obtain the sorted list of available ciphers, until '' is returned:

my $priority = 0;
while (my $c = Net::SSLeay::get_cipher_list($ssl, $priority)) {
  print "cipher[$priority] = $c\n";
  $priority++;
}

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_ciphers.html

get_client_CA_list

Returns the list of client CAs explicitly set for $ssl using Net::SSleay::set_client_CA_list or $ssl's SSL_CTX object with Net::SSLeay::CTX_set_client_CA_list, when in server mode.

In client mode, returns the list of client CAs sent from the server, if any.
```
my $rv = Net::SSLeay::get_client_CA_list($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's STACK_OF(X509_NAME) structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_client_CA_list.html

get_current_cipher

Returns the cipher actually used.

my $rv = Net::SSLeay::get_current_cipher($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL_CIPHER structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_current_cipher.html

get_default_timeout

Returns the default timeout value assigned to SSL_SESSION objects negotiated for the protocol valid for $ssl.
```
my $rv = Net::SSLeay::get_default_timeout($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (long) timeout in seconds
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_default_timeout.html

get_error

Returns a result code for a preceding call to connect, accept, do_handshake, read, peek or write on $ssl.

my $rv = Net::SSLeay::get_error($ssl, $ret);
# $ssl - value corresponding to openssl's SSL structure
# $ret - return value of preceeding TLS/SSL I/O operation
#
# returns: result code, which is one of the following values:
#  0 - SSL_ERROR_NONE
#  1 - SSL_ERROR_SSL
#  2 - SSL_ERROR_WANT_READ
#  3 - SSL_ERROR_WANT_WRITE
#  4 - SSL_ERROR_WANT_X509_LOOKUP
#  5 - SSL_ERROR_SYSCALL
#  6 - SSL_ERROR_ZERO_RETURN
#  7 - SSL_ERROR_WANT_CONNECT
#  8 - SSL_ERROR_WANT_ACCEPT

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_error.html

get_ex_data

Is used to retrieve the information for $idx from $ssl.

my $rv = Net::SSLeay::get_ex_data($ssl, $idx);
# $ssl - value corresponding to openssl's SSL structure
# $idx - (integer) index for application specific data
#
# returns: pointer to ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_ex_new_index.html

set_ex_data

Is used to store application data at $data for $idx into the $ssl object.

my $rv = Net::SSLeay::set_ex_data($ssl, $idx, $data);
# $ssl - value corresponding to openssl's SSL structure
# $idx - (integer) ???
# $data - (pointer) ???
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_ex_new_index.html

get_ex_new_index

Is used to register a new index for application specific data.

my $rv = Net::SSLeay::get_ex_new_index($argl, $argp, $new_func, $dup_func, $free_func);
# $argl - (long) ???
# $argp - (pointer) ???
# $new_func - function pointer ??? (CRYPTO_EX_new *)
# $dup_func - function pointer ??? (CRYPTO_EX_dup *)
# $free_func - function pointer ??? (CRYPTO_EX_free *)
#
# returns: (integer) ???

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_ex_new_index.html

get_fd

Returns the file descriptor which is linked to $ssl.

my $rv = Net::SSLeay::get_fd($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: file descriptor (>=0) or -1 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_fd.html

get_finished

Obtains the latest 'Finished' message sent to the peer.

??? (does this function really work?)

my $rv = Net::SSLeay::get_finished($ssl, $buf, $count);
# $ssl - value corresponding to openssl's SSL structure
# $buf - buffer where the returned data will be stored (pointer ???, pre-allocated ???)
# $count - max. size of return data
#
# returns: actual size of the returned data in $buf

get_peer_finished

Obtains the latest 'Finished' message expected from the peer.

??? (does this function really work?)

my $rv = Net::SSLeay::get_peer_finished($ssl, $buf, $count);
# $ssl - value corresponding to openssl's SSL structure
# $buf - buffer where the returned data will be stored (pointer ???, pre-allocated ???)
# $count - max. size of the return data
#
# returns: actual size of the returned data in $buf

get_keyblock_size

NOTE: Does not exactly correspond to any low level API function.

??? (more info needed)

my $rv = Net::SSLeay::get_keyblock_size($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: keyblock size, -1 on error

get_mode

Returns the mode (bitmask) set for $ssl.
```
my $rv = Net::SSLeay::get_mode($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: mode (bitmask)
```
To decode the return value (bitmask) see documentation for "CTX_get_mode".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_mode.html
set_mode

Adds the mode set via bitmask in $mode to $ssl. Options already set before are not cleared.
```
my $rv = Net::SSLeay::set_mode($ssl, $mode);
# $ssl - value corresponding to openssl's SSL structure
# $mode - mode (bitmask)
#
# returns: the new mode bitmask after adding $mode
```
For $mode bitmask details see "CTX_get_mode".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_mode.html
get_options

Returns the options (bitmask) set for $ssl.
```
my $rv = Net::SSLeay::get_options($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: options (bitmask)
```
To decode the return value (bitmask) see documentation for "CTX_get_options".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_options.html
set_options

Adds the options set via bitmask in $options to $ssl. Options already set before are not cleared!
```
Net::SSLeay::set_options($ssl, $options);
# $ssl - value corresponding to openssl's SSL structure
# $options - options (bitmask)
#
# returns: the new options bitmask after adding $options
```
For $options bitmask details see "CTX_get_options".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_options.html

get_peer_certificate

Get the X509 certificate of the peer.

my $rv = Net::SSLeay::get_peer_certificate($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's X509 structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_peer_certificate.html

get_quiet_shutdown

Returns the 'quiet shutdown' setting of ssl.

my $rv = Net::SSLeay::get_quiet_shutdown($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer) current 'quiet shutdown' value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_quiet_shutdown.html

get_rbio

Get 'read' BIO linked to an SSL object $ssl.

my $rv = Net::SSLeay::get_rbio($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_rbio.html

get_read_ahead

my $rv = Net::SSLeay::get_read_ahead($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer) read_ahead value

set_read_ahead

Net::SSLeay::set_read_ahead($ssl, $val);
# $ssl - value corresponding to openssl's SSL structure
# $val - read_ahead value to be set
#
# returns: the original read_ahead value

get_server_random

Returns internal SSLv3 server_random value.

Net::SSLeay::get_server_random($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: server_random value (binary data)

get_client_random

NOTE: Does not exactly correspond to any low level API function

Returns internal SSLv3 client_random value.

Net::SSLeay::get_client_random($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: client_random value (binary data)

get_session

Retrieve TLS/SSL session data used in $ssl. The reference count of the SSL_SESSION is NOT incremented.
```
my $rv = Net::SSLeay::get_session($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL_SESSION structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_session.html
SSL_get0_session

The alias for "get_session" (note that the name is SSL_get0_session NOT get0_session).
```
my $rv = Net::SSLeay::SSL_get0_session();
```
get1_session

Returns a pointer to the SSL_SESSION actually used in $ssl. The reference count of the SSL_SESSION is incremented by 1.
```
my $rv = Net::SSLeay::get1_session($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL_SESSION structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_session.html

get_shared_ciphers

Returns string with a list (colon ':' separated) of ciphers shared between client and server within SSL session $ssl.

my $rv = Net::SSLeay::get_shared_ciphers()
#
# returns: string like 'ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:...'

get_shutdown

Returns the shutdown mode of $ssl.

my $rv = Net::SSLeay::get_shutdown($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: shutdown mode (bitmask) of ssl

#to decode the return value (bitmask) use:
0 - No shutdown setting, yet
1 - SSL_SENT_SHUTDOWN
2 - SSL_RECEIVED_SHUTDOWN

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_shutdown.html

get_ssl_method

Returns a function pointer to the TLS/SSL method set in $ssl.

my $rv = Net::SSLeay::get_ssl_method($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's SSL_METHOD structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_ssl_version.html

get_state

Returns the SSL connection state.

my $rv = Net::SSLeay::get_state($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer) state value
#          to decode the returned state check:
#          SSL_ST_* constants in openssl/ssl.h
#          SSL2_ST_* constants in openssl/ssl2.h
#          SSL23_ST_* constants in openssl/ssl23.h
#          SSL3_ST_* + DTLS1_ST_* constants in openssl/ssl3.h

state

Exactly the same as "get_state".
```
my $rv = Net::SSLeay::state($ssl);
```

get_verify_depth

Returns the verification depth limit currently set in $ssl.

my $rv = Net::SSLeay::get_verify_depth($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: current depth or -1 if no limit has been explicitly set

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_verify_mode.html

set_verify_depth

Sets the maximum depth for the certificate chain verification that shall be allowed for $ssl.
```
Net::SSLeay::set_verify_depth($ssl, $depth);
# $ssl - value corresponding to openssl's SSL structure
# $depth - (integer) depth
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_verify.html
get_verify_mode

Returns the verification mode (bitmask) currently set in $ssl.
```
my $rv = Net::SSLeay::get_verify_mode($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: mode (bitmask)
```
To decode the return value (bitmask) see documentation for "CTX_get_verify_mode".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_get_verify_mode.html
set_verify

Sets the verification flags for $ssl to be $mode and specifies the $verify_callback function to be used.
```
Net::SSLeay::set_verify($ssl, $mode, $callback);
# $ssl - value corresponding to openssl's SSL structure
# $mode - mode (bitmask)
# $callback - [optional] reference to perl callback function
#
# returns: no return value
```
For $mode bitmask details see "CTX_get_verify_mode".

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_verify.html

get_verify_result

Returns the result of the verification of the X509 certificate presented by the peer, if any.

my $rv = Net::SSLeay::get_verify_result($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer)
#      0 - X509_V_OK: ok
#      2 - X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: unable to get issuer certificate
#      3 - X509_V_ERR_UNABLE_TO_GET_CRL: unable to get certificate CRL
#      4 - X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: unable to decrypt certificate's signature
#      5 - X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE: unable to decrypt CRL's signature
#      6 - X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY: unable to decode issuer public key
#      7 - X509_V_ERR_CERT_SIGNATURE_FAILURE: certificate signature failure
#      8 - X509_V_ERR_CRL_SIGNATURE_FAILURE: CRL signature failure
#      9 - X509_V_ERR_CERT_NOT_YET_VALID: certificate is not yet valid
#     10 - X509_V_ERR_CERT_HAS_EXPIRED: certificate has expired
#     11 - X509_V_ERR_CRL_NOT_YET_VALID: CRL is not yet valid
#     12 - X509_V_ERR_CRL_HAS_EXPIRED: CRL has expired
#     13 - X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: format error in certificate's notBefore field
#     14 - X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD: format error in certificate's notAfter field
#     15 - X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: format error in CRL's lastUpdate field
#     16 - X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: format error in CRL's nextUpdate field
#     17 - X509_V_ERR_OUT_OF_MEM: out of memory
#     18 - X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT: self signed certificate
#     19 - X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN: self signed certificate in certificate chain
#     20 - X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate
#     21 - X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: unable to verify the first certificate
#     22 - X509_V_ERR_CERT_CHAIN_TOO_LONG: certificate chain too long
#     23 - X509_V_ERR_CERT_REVOKED: certificate revoked
#     24 - X509_V_ERR_INVALID_CA: invalid CA certificate
#     25 - X509_V_ERR_PATH_LENGTH_EXCEEDED: path length constraint exceeded
#     26 - X509_V_ERR_INVALID_PURPOSE: unsupported certificate purpose
#     27 - X509_V_ERR_CERT_UNTRUSTED: certificate not trusted
#     28 - X509_V_ERR_CERT_REJECTED: certificate rejected
#     29 - X509_V_ERR_SUBJECT_ISSUER_MISMATCH: subject issuer mismatch
#     30 - X509_V_ERR_AKID_SKID_MISMATCH: authority and subject key identifier mismatch
#     31 - X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH: authority and issuer serial number mismatch
#     32 - X509_V_ERR_KEYUSAGE_NO_CERTSIGN:key usage does not include certificate signing
#     50 - X509_V_ERR_APPLICATION_VERIFICATION: application verification failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_verify_result.html

set_verify_result

Override result of peer certificate verification.
```
Net::SSLeay::set_verify_result($ssl, $v);
# $ssl - value corresponding to openssl's SSL structure
# $v - (integer) result value
#
# returns: no return value
```
For more info about valid return values see "get_verify_result"

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_verify_result.html

get_wbio

Get 'write' BIO linked to an SSL object $ssl.

my $rv = Net::SSLeay::get_wbio($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_get_rbio.html

load_client_CA_file

Load X509 certificates from file (PEM formated).

my $rv = Net::SSLeay::load_client_CA_file($file);
# $file - (string) file name
#
# returns: value corresponding to openssl's STACK_OF(X509_NAME) structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_load_client_CA_file.html

clear_num_renegotiations

Executes SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS command on $ssl.

my $rv = Net::SSLeay::clear_num_renegotiations($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: command result

need_tmp_RSA

Executes SSL_CTRL_NEED_TMP_RSA command on $ssl.

my $rv = Net::SSLeay::need_tmp_RSA($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: command result

num_renegotiations

Executes SSL_CTRL_GET_NUM_RENEGOTIATIONS command on $ssl.

my $rv = Net::SSLeay::num_renegotiations($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: command result

total_renegotiations

Executes SSL_CTRL_GET_TOTAL_RENEGOTIATIONS command on $ssl.

my $rv = Net::SSLeay::total_renegotiations($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: command result

peek

Copies $max bytes from the specified $ssl into the returned value. In constrast to the Net::SSLeay::read() function, the data in the SSL buffer is unmodified after the SSL_peek() operation.

Net::SSLeay::peek($ssl, $max);
# $ssl - value corresponding to openssl's SSL structure
# $max - [optional] max bytes to peek (integer) - default is 32768
#
# returns: read data, undef on error

pending

Obtain number of readable bytes buffered in $ssl object.

my $rv = Net::SSLeay::pending($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: the number of bytes pending

Check openssl doc http://www.openssl.org/docs/ssl/SSL_pending.html

read

Tries to read $max bytes from the specified $ssl.

my $rv = Net::SSLeay::read($ssl, $max);
# $ssl - value corresponding to openssl's SSL structure
# $max - [optional] max bytes to read (integer) - default is 32768
#
# returns: data read from a TLS/SSL connection, undef on error

Check openssl doc http://www.openssl.org/docs/ssl/SSL_read.html

renegotiate

Turn on flags for renegotiation so that renegotiation will happen

my $rv = Net::SSLeay::renegotiate($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 on success, 0 on failure

rstate_string

Returns a 2 letter string indicating the current read state of the SSL object $ssl.
```
my $rv = Net::SSLeay::rstate_string($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 2-letter string
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_rstate_string.html
rstate_string_long

Returns a string indicating the current read state of the SSL object ssl.
```
my $rv = Net::SSLeay::rstate_string_long($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: string with current state
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_rstate_string.html

session_reused

Query whether a reused session was negotiated during handshake.

my $rv = Net::SSLeay::session_reused($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 0 - new session was negotiated; 1 - session was reused.

Check openssl doc http://www.openssl.org/docs/ssl/SSL_session_reused.html

set1_param

Applies X509 verification parameters $vpm on $ssl

my $rv = Net::SSLeay::set1_param($ssl, $vpm);
# $ssl - value corresponding to openssl's SSL structure
# $vpm - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

set_accept_state

Sets $ssl to work in server mode.
```
Net::SSLeay::set_accept_state($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_connect_state.html

set_bio

Connects the BIOs $rbio and $wbio for the read and write operations of the TLS/SSL (encrypted) side of $ssl.

Net::SSLeay::set_bio($ssl, $rbio, $wbio);
# $ssl - value corresponding to openssl's SSL structure
# $rbio - value corresponding to openssl's BIO structure
# $wbio - value corresponding to openssl's BIO structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_bio.html

set_cipher_list

Sets the list of ciphers only for ssl.

my $rv = Net::SSLeay::set_cipher_list($ssl, $str);
# $ssl - value corresponding to openssl's SSL structure
# $str - (string) cipher list e.g. '3DES:+RSA'
#
# returns: 1 if any cipher could be selected and 0 on complete failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cipher_list.html

set_client_CA_list

Sets the list of CAs sent to the client when requesting a client certificate for the chosen $ssl, overriding the setting valid for $ssl's SSL_CTX object.
```
my $rv = Net::SSLeay::set_client_CA_list($ssl, $list);
# $ssl - value corresponding to openssl's SSL structure
# $list - value corresponding to openssl's STACK_OF(X509_NAME) structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_client_CA_list.html
set_connect_state

Sets $ssl to work in client mode.
```
Net::SSLeay::set_connect_state($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_connect_state.html
set_fd

Sets the file descriptor $fd as the input/output facility for the TLS/SSL (encrypted) side of $ssl, $fd will typically be the socket file descriptor of a network connection.
```
my $rv = Net::SSLeay::set_fd($ssl, $fd);
# $ssl - value corresponding to openssl's SSL structure
# $fd - (integer) file handle (got via perl's fileno)
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_fd.html

set_rfd

Sets the file descriptor $fd as the input (read) facility for the TLS/SSL (encrypted) side of $ssl.

my $rv = Net::SSLeay::set_rfd($ssl, $fd);
# $ssl - value corresponding to openssl's SSL structure
# $fd - (integer) file handle (got via perl's fileno)
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_fd.html

set_wfd

my $rv = Net::SSLeay::set_wfd($ssl, $fd);
# $ssl - value corresponding to openssl's SSL structure
# $fd - (integer) file handle (got via perl's fileno)
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_fd.html

set_info_callback

Sets the callback function, that can be used to obtain state information for $ssl during connection setup and use. When callback is 0 (NULL), the callback setting currently valid for ctx is used.

??? (does this function really work?)
```
Net::SSLeay::set_info_callback($ssl, $cb);
# $ssl - value corresponding to openssl's SSL structure
# $cb - pointer to function ???
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_info_callback.html

set_pref_cipher

Sets the list of available ciphers for $ssl using the control string $str.

my $rv = Net::SSLeay::set_pref_cipher($ssl, $str);
# $ssl - value corresponding to openssl's SSL structure
# $str - (string) cipher list e.g. '3DES:+RSA'
#
# returns: 1 if any cipher could be selected and 0 on complete failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_cipher_list.html

set_purpose

my $rv = Net::SSLeay::set_purpose($ssl, $purpose);
# $ssl - value corresponding to openssl's SSL structure
# $purpose - (integer) purpose identifier
#
# returns: 1 on success, 0 on failure

For more info about available $purpose identifiers see "CTX_set_purpose".

set_quiet_shutdown

Sets the 'quiet shutdown' flag for $ssl to be $mode.
```
Net::SSLeay::set_quiet_shutdown($ssl, $mode);
# $ssl - value corresponding to openssl's SSL structure
# $mode - 0 or 1
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_quiet_shutdown.html

set_session

Set a TLS/SSL session to be used during TLS/SSL connect.

my $rv = Net::SSLeay::set_session($to, $ses);
# $to - value corresponding to openssl's SSL structure
# $ses - value corresponding to openssl's SSL_SESSION structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_session.html

set_session_id_context

Sets the context $sid_ctx of length $sid_ctx_len within which a session can be reused for the $ssl object.

my $rv = Net::SSLeay::set_session_id_context($ssl, $sid_ctx, $sid_ctx_len);
# $ssl - value corresponding to openssl's SSL structure
# $sid_ctx - data buffer
# $sid_ctx_len - lenght of data in $sid_ctx
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_session_id_context.html

set_session_secret_cb

Setup pre-shared secret session resumption function.

Net::SSLeay::set_session_secret_cb($ssl, $func, $data);
# $ssl - value corresponding to openssl's SSL structure
# $func - perl reference to callback function
# $data - [optional] data that will be passed to callback function when invoked
#
# returns: no return value

set_shutdown

Sets the shutdown state of $ssl to $mode.

Net::SSLeay::set_shutdown($ssl, $mode);
# $ssl - value corresponding to openssl's SSL structure
# $mode - (integer) shutdown mode:
#         0 - No shutdown
#         1 - SSL_SENT_SHUTDOWN
#         2 - SSL_RECEIVED_SHUTDOWN
#         3 - SSL_RECEIVED_SHUTDOWN+SSL_SENT_SHUTDOWN
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/ssl/SSL_set_shutdown.html

set_ssl_method

Sets a new TLS/SSL method for a particular $ssl object.

my $rv = Net::SSLeay::set_ssl_method($ssl, $method);
# $ssl - value corresponding to openssl's SSL structure
# $method - value corresponding to openssl's SSL_METHOD structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_ssl_version.html

set_tmp_dh

Sets DH parameters to be used to be $dh.

my $rv = Net::SSLeay::set_tmp_dh($ssl, $dh);
# $ssl - value corresponding to openssl's SSL structure
# $dh - value corresponding to openssl's DH structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_dh_callback.html

set_tmp_dh_callback

Sets the callback function for $ssl to be used when a DH parameters are required to $dh_cb.

??? (does this function really work?)
```
Net::SSLeay::set_tmp_dh_callback($ssl, $dh);
# $ssl - value corresponding to openssl's SSL structure
# $dh_cb - pointer to function ???
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_dh_callback.html

set_tmp_rsa

Sets the temporary/ephemeral RSA key to be used in $ssl to be $rsa.

my $rv = Net::SSLeay::set_tmp_rsa($ssl, $rsa);
# $ssl - value corresponding to openssl's SSL structure
# $rsa - value corresponding to openssl's RSA structure
#
# returns: 1 on success, 0 on failure

Example:

$rsakey = Net::SSLeay::RSA_generate_key();
Net::SSLeay::set_tmp_rsa($ssl, $rsakey);
Net::SSLeay::RSA_free($rsakey);

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_rsa_callback.html

set_tmp_rsa_callback

Sets the callback function for $ssl to be used when a temporary/ephemeral RSA key is required to $tmp_rsa_callback.

??? (does this function really work?)
```
Net::SSLeay::set_tmp_rsa_callback($ssl, $tmp_rsa_callback);
# $ssl - value corresponding to openssl's SSL structure
# $tmp_rsa_callback - (function pointer) ???
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_set_tmp_rsa_callback.html

set_trust

my $rv = Net::SSLeay::set_trust($ssl, $trust);
# $ssl - value corresponding to openssl's SSL structure
# $trust - (integer) trust identifier
#
# returns: the original value

For more details about $trust values see "CTX_set_trust".

shutdown

Shuts down an active TLS/SSL connection. It sends the 'close notify' shutdown alert to the peer.

my $rv = Net::SSLeay::shutdown($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 1 - shutdown was successfully completed
#          0 - shutdown is not yet finished,
#         -1 - shutdown was not successful

Check openssl doc http://www.openssl.org/docs/ssl/SSL_shutdown.html

state_string

Returns a 6 letter string indicating the current state of the SSL object $ssl.
```
my $rv = Net::SSLeay::state_string($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: 6-letter string
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_state_string.html
state_string_long

Returns a string indicating the current state of the SSL object $ssl.
```
my $rv = Net::SSLeay::state_string_long($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: state strings
```
Check openssl doc http://www.openssl.org/docs/ssl/SSL_state_string.html

use_PrivateKey

Adds $pkey as private key to $ssl.

my $rv = Net::SSLeay::use_PrivateKey($ssl, $pkey);
# $ssl - value corresponding to openssl's SSL structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_PrivateKey_ASN1

Adds the private key of type $pk stored in $data to $ssl.

my $rv = Net::SSLeay::use_PrivateKey_ASN1($pk, $ssl, $d, $len);
# $pk - (integer) key type, NID of corresponding algorithm
# $ssl - value corresponding to openssl's SSL structure
# $data - key data (binary)
# $len - length of $data
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_PrivateKey_file

Adds the first private key found in $file to $ssl.

my $rv = Net::SSLeay::use_PrivateKey_file($ssl, $file, $type);
# $ssl - value corresponding to openssl's SSL structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_RSAPrivateKey

Adds $rsa as RSA private key to $ssl.

my $rv = Net::SSLeay::use_RSAPrivateKey($ssl, $rsa);
# $ssl - value corresponding to openssl's SSL structure
# $rsa - value corresponding to openssl's RSA structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_RSAPrivateKey_ASN1

Adds RSA private key stored in $data to $ssl.

my $rv = Net::SSLeay::use_RSAPrivateKey_ASN1($ssl, $data, $len);
# $ssl - value corresponding to openssl's SSL structure
# $data - key data (binary)
# $len - length of $data
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_RSAPrivateKey_file

Adds the first RSA private key found in $file to $ssl.

my $rv = Net::SSLeay::use_RSAPrivateKey_file($ssl, $file, $type);
# $ssl - value corresponding to openssl's SSL structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_certificate

Loads the certificate $x into $ssl.

my $rv = Net::SSLeay::use_certificate($ssl, $x);
# $ssl - value corresponding to openssl's SSL structure
# $x - value corresponding to openssl's X509 structure
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_certificate_ASN1

Loads the ASN1 encoded certificate from $data to $ssl.

my $rv = Net::SSLeay::use_certificate_ASN1($ssl, $data, $len);
# $ssl - value corresponding to openssl's SSL structure
# $data - certificate data (binary)
# $len - length of $data
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

use_certificate_file

Loads the first certificate stored in $file into $ssl.

my $rv = Net::SSLeay::use_certificate_file($ssl, $file, $type);
# $ssl - value corresponding to openssl's SSL structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, otherwise check out the error stack to find out the reason

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CTX_use_certificate.html

version

Returns SSL/TLS protocol version

my $rv = Net::SSLeay::version($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer) protocol version
#          0x0002 - SSL2_VERSION  (SSLv2)
#          0x0300 - SSL3_VERSION  (SSLv3)
#          0x0301 - TLS1_VERSION  (TLSv1)
#          0xFEFF - DTLS1_VERSION (DTLSv1)

want

Returns state information for the SSL object $ssl.

my $rv = Net::SSLeay::want($ssl);
# $ssl - value corresponding to openssl's SSL structure
#
# returns: state
#          1 - SSL_NOTHING
#          2 - SSL_WRITING
#          3 - SSL_READING
#          4 - SSL_X509_LOOKUP

Check openssl doc http://www.openssl.org/docs/ssl/SSL_want.html

write

Writes data from the buffer $data into the specified $ssl connection.

my $rv = Net::SSLeay::write($ssl, $data);
# $ssl - value corresponding to openssl's SSL structure
# $data - data to be written
#
# returns: >0 - (success) number of bytes actually written to the TLS/SSL connection
#           0 - write not successful, probably the underlying connection was closed
#          <0 - error

Check openssl doc http://www.openssl.org/docs/ssl/SSL_write.html

write_partial

NOTE: Does not exactly correspond to any low level API function

Writes a fragment of data data from the buffer $data into the specified $ssl connection.

my $rv = Net::SSLeay::write_partial($ssl, $from, $count, $data);
# $ssl - value corresponding to openssl's SSL structure
# $from - (integer) offset from the beginning of $data
# $count - (integer) length of data to be written
# $data - data buffer
#
# returns: >0 - (success) number of bytes actually written to the TLS/SSL connection
#           0 - write not successful, probably the underlying connection was closed
#          <0 - error

set_tlsext_host_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.8f

Sets TLS servername extension on SLL object $ssl to value $name.
```
my $rv = set_tlsext_host_name($ssl, $name);
# $ssl - value corresponding to openssl's SSL structure
# $name - (string) name to be set
#
# returns: 1 on success, 0 on failure
```

Check openssl doc related to RAND stuff http://www.openssl.org/docs/crypto/rand.html

RAND_add

Mixes the $num bytes at $buf into the PRNG state.

Net::SSLeay::RAND_add($buf, $num, $entropy);
# $buf - buffer with data to be mixed into the PRNG state
# $num - number of bytes in $buf
# $entropy - estimate of how much randomness is contained in $buf (in bytes)
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/RAND_add.html

RAND_seed

Equivalent to "RAND_add" when $num == $entropy.

Net::SSLeay::RAND_seed($buf);   # Perlishly figures out buf size
# $buf - buffer with data to be mixed into the PRNG state
# $num - number of bytes in $buf
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/RAND_add.html

RAND_status

Gives PRNG status (seeded enough or not).
```
my $rv = Net::SSLeay::RAND_status();
#returns: 1 if the PRNG has been seeded with enough data, 0 otherwise
```
Check openssl doc http://www.openssl.org/docs/crypto/RAND_add.html

RAND_bytes

Puts $num cryptographically strong pseudo-random bytes into $buf.

my $rv = Net::SSLeay::RAND_bytes($buf, $num);
# $buf - buffer where the random data will be stored
# $num - the size (in bytes) of requested random data
#
# returns: 1 on success, 0 otherwise

Check openssl doc http://www.openssl.org/docs/crypto/RAND_bytes.html

RAND_pseudo_bytes

Puts $num pseudo-random (not necessarily unpredictable) bytes into $buf.

my $rv = Net::SSLeay::RAND_pseudo_bytes($buf, $num);
# $buf - buffer where the random data will be stored
# $num - the size (in bytes) of requested random data
#
# returns: 1 if the bytes generated are cryptographically strong, 0 otherwise

Check openssl doc http://www.openssl.org/docs/crypto/RAND_bytes.html

RAND_cleanup

Erase the PRNG state.
```
Net::SSLeay::RAND_cleanup();
# no args, no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/RAND_cleanup.html

RAND_egd

Queries the entropy gathering daemon EGD on socket $path for 255 bytes.

my $rv = Net::SSLeay::RAND_egd($path);
# $path - path to a socket of entropy gathering daemon EGD
#
# returns: the number of bytes read from the daemon on success, and -1 on failure

Check openssl doc http://www.openssl.org/docs/crypto/RAND_egd.html

RAND_egd_bytes

Queries the entropy gathering daemon EGD on socket $path for $bytes bytes.

my $rv = Net::SSLeay::RAND_egd_bytes($path, $bytes);
# $path - path to a socket of entropy gathering daemon EGD
# $bytes - number of bytes we want from EGD
#
# returns: the number of bytes read from the daemon on success, and -1 on failure

Check openssl doc http://www.openssl.org/docs/crypto/RAND_egd.html

RAND_file_name

Generates a default path for the random seed file.

my $file = Net::SSLeay::RAND_file_name($num);
# $num - maximum size of returned file name
#
# returns: string with file name on success, '' (empty string) on failure

Check openssl doc http://www.openssl.org/docs/crypto/RAND_load_file.html

RAND_load_file

Reads $max_bytes of bytes from $file_name and adds them to the PRNG.

my $rv = Net::SSLeay::RAND_load_file($file_name, $max_bytes);
# $file_name - the name of file
# $max_bytes - bytes to read from $file_name; -1 => the complete file is read
#
# returns: the number of bytes read

Check openssl doc http://www.openssl.org/docs/crypto/RAND_load_file.html

RAND_write_file

Writes 1024 random bytes to $file_name which can be used to initialize the PRNG by calling "RAND_load_file" in a later session.
```
my $rv = Net::SSLeay::RAND_write_file($file_name);
# $file_name - the name of file
#
# returns: the number of bytes written, and -1 if the bytes written were generated without appropriate seed
```
Check openssl doc http://www.openssl.org/docs/crypto/RAND_load_file.html

RAND_poll

Collects some entropy from operating system and adds it to the PRNG.

my $rv = Net::SSLeay::RAND_poll();
# returns: 1 on success, 0 on failure (unable to gather reasonable entropy)

OBJ_cmp

Compares ASN1_OBJECT $a to ASN1_OBJECT $b.

my $rv = Net::SSLeay::OBJ_cmp($a, $b);
# $a - value corresponding to openssl's ASN1_OBJECT structure
# $b - value corresponding to openssl's ASN1_OBJECT structure
#
# returns: if the two are identical 0 is returned

Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_dup

Returns a copy/duplicate of $o.

my $rv = Net::SSLeay::OBJ_dup($o);
# $o - value corresponding to openssl's ASN1_OBJECT structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_nid2ln

Returns long name for given NID $n.
```
my $rv = Net::SSLeay::OBJ_nid2ln($n);
# $n - (integer) NID
#
# returns: (string) long name e.g. 'commonName'
```
Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_ln2nid

Returns NID corresponding to given long name $n.

my $rv = Net::SSLeay::OBJ_ln2nid($s);
# $s - (string) long name e.g. 'commonName'
#
# returns: (integer) NID

OBJ_nid2sn

Returns short name for given NID $n.

my $rv = Net::SSLeay::OBJ_nid2sn($n);
# $n - (integer) NID
#
# returns: (string) short name e.g. 'CN'

Example:

print Net::SSLeay::OBJ_nid2sn(&Net::SSLeay::NID_commonName);

OBJ_sn2nid

Returns NID corresponding to given short name $s.

my $rv = Net::SSLeay::OBJ_sn2nid($s);
# $s - (string) short name e.g. 'CN'
#
# returns: (integer) NID

Example:

print "NID_commonName constant=", &Net::SSLeay::NID_commonName;
print "OBJ_sn2nid('CN')=", Net::SSLeay::OBJ_sn2nid('CN');

OBJ_nid2obj

Returns ASN1_OBJECT for given NID $n.

my $rv = Net::SSLeay::OBJ_nid2obj($n);
# $n - (integer) NID
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_obj2nid

Returns NID corresponding to given ASN1_OBJECT $o.
```
my $rv = Net::SSLeay::OBJ_obj2nid($o);
# $o - value corresponding to openssl's ASN1_OBJECT structure
#
# returns: (integer) NID
```
Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html
OBJ_txt2obj

Converts the text string s into an ASN1_OBJECT structure. If $no_name is 0 then long names (e.g. 'commonName') and short names (e.g. 'CN') will be interpreted as well as numerical forms (e.g. '2.5.4.3'). If $no_name is 1 only the numerical form is acceptable.
```
my $rv = Net::SSLeay::OBJ_txt2obj($s, $no_name);
# $s - text string to be converted
# $no_name - (integer) 0 or 1
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_obj2txt

Converts the ASN1_OBJECT a into a textual representation.

Net::SSLeay::OBJ_obj2txt($a, $no_name);
# $a - value corresponding to openssl's ASN1_OBJECT structure
# $no_name - (integer) 0 or 1
#
# returns: textual representation e.g. 'commonName' ($no_name=0), '2.5.4.3' ($no_name=1)

Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

OBJ_txt2nid

Returns NID corresponding to text string $s which can be a long name, a short name or the numerical respresentation of an object.
```
my $rv = Net::SSLeay::OBJ_txt2nid($s);
# $s - (string) e.g. 'commonName' or 'CN' or '2.5.4.3'
#
# returns: (integer) NID
```
Example:
```
my $nid = Net::SSLeay::OBJ_txt2nid('2.5.4.3');
Net::SSLeay::OBJ_nid2sn($n);
```
Check openssl doc http://www.openssl.org/docs/crypto/OBJ_nid2obj.html

ASN1_INTEGER_new

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Creates a new ASN1_INTEGER structure.

my $rv = Net::SSLeay::ASN1_INTEGER_new();
#
# returns: value corresponding to openssl's ASN1_INTEGER structure (0 on failure)

ASN1_INTEGER_free

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Free an allocated ASN1_INTEGER structure.

Net::SSLeay::ASN1_INTEGER_free($i);
# $i - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: no return value

ASN1_INTEGER_get

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns integer value of given ASN1_INTEGER object.

BEWARE: If the value stored in ASN1_INTEGER is greater than max. integer that can be stored in 'long' type (usually 32bit but may vary according to platform) then this function will return -1. For getting large ASN1_INTEGER values consider using "P_ASN1_INTEGER_get_dec" or "P_ASN1_INTEGER_get_hex".
```
my $rv = Net::SSLeay::ASN1_INTEGER_get($a);
# $a - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: integer value of ASN1_INTEGER object in $a
```
ASN1_INTEGER_set

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets value of given ASN1_INTEGER object to value $val

BEWARE: $val has max. limit (= max. integer that can be stored in 'long' type). For setting large ASN1_INTEGER values consider using "P_ASN1_INTEGER_set_dec" or "P_ASN1_INTEGER_set_hex".
```
my $rv = Net::SSLeay::ASN1_INTEGER_set($i, $val);
# $i - value corresponding to openssl's ASN1_INTEGER structure
# $val - integer value
#
# returns: 1 on success, 0 on failure
```
P_ASN1_INTEGER_get_dec

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns string with decimal representation of integer value of given ASN1_INTEGER object.
```
Net::SSLeay::P_ASN1_INTEGER_get_dec($i);
# $i - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: string with decimal representation
```
P_ASN1_INTEGER_get_hex

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns string with hexadecimal representation of integer value of given ASN1_INTEGER object.
```
Net::SSLeay::P_ASN1_INTEGER_get_hex($i);
# $i - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: string with hexadecimal representation
```

P_ASN1_INTEGER_set_dec

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets value of given ASN1_INTEGER object to value $val (decimal string, suitable for large integers)

Net::SSLeay::P_ASN1_INTEGER_set_dec($i, $str);
# $i - value corresponding to openssl's ASN1_INTEGER structure
# $str - string with decimal representation
#
# returns: 1 on success, 0 on failure

P_ASN1_INTEGER_set_hex

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets value of given ASN1_INTEGER object to value $val (hexadecimal string, suitable for large integers)

Net::SSLeay::P_ASN1_INTEGER_set_hex($i, $str);
# $i - value corresponding to openssl's ASN1_INTEGER structure
# $str - string with hexadecimal representation
#
# returns: 1 on success, 0 on failure

P_ASN1_STRING_get

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns string value of given ASN1_STRING object.

Net::SSLeay::P_ASN1_STRING_get($s, $utf8_decode);
# $s - value corresponding to openssl's ASN1_STRING structure
# $utf8_decode - [optional] 0 or 1 whether the returned value should be utf8 decoded (default=0)
#
# returns: string

$string = Net::SSLeay::P_ASN1_STRING_get($s);
#is the same as:
$string = Net::SSLeay::P_ASN1_STRING_get($s, 0);

ASN1_TIME_new

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

my $time = ASN1_TIME_new();
# returns: value corresponding to openssl's ASN1_TIME structure

ASN1_TIME_free

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

ASN1_TIME_free($time);
# $time - value corresponding to openssl's ASN1_TIME structure

ASN1_TIME_set

COMPATIBILITY: not available in Net-SSLeay-1.42 and before
```
ASN1_TIME_set($time, $t);
# $time - value corresponding to openssl's ASN1_TIME structure
# $t - time value in seconds since 1.1.1970
```
BEWARE: It is platform dependent how this function will handle dates after 2038. Although perl's integer is large enough the internal implementation of this function is dependant on the size of time_t structure (32bit time_t has problem with 2038).

If you want to safely set date and time after 2038 use function "P_ASN1_TIME_set_isotime".
P_ASN1_TIME_get_isotime

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7e

NOTE: Does not exactly correspond to any low level API function

Gives ISO-8601 string representation of ASN1_TIME structure.
```
my $datetime_string = P_ASN1_TIME_get_isotime($time);
# $time - value corresponding to openssl's ASN1_TIME structure
#
# returns: datetime string like '2033-05-16T20:39:37Z' or '' on failure
```
The output format is compatible with module DateTime::Format::RFC3339
P_ASN1_TIME_set_isotime

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7e

NOTE: Does not exactly correspond to any low level API function

Sets time and date value of ANS1_time structure.
```
my $rv = P_ASN1_TIME_set_isotime($time, $string);
# $time - value corresponding to openssl's ASN1_TIME structure
# $string - ISO-8601 timedate string like '2033-05-16T20:39:37Z'
#
# returns: 1 on success, 0 on failure
```
The $string parameter has to be in full form like "2012-03-22T23:55:33" or "2012-03-22T23:55:33Z" or "2012-03-22T23:55:33CET". Short forms like "2012-03-22T23:55" or "2012-03-22" are not supported.
P_ASN1_TIME_put2string

COMPATIBILITY: not available in Net-SSLeay-1.42 and before, has bugs with openssl-0.9.8i

NOTE: Does not exactly correspond to any low level API function

Gives string representation of ASN1_TIME structure.
```
my $str = P_ASN1_TIME_put2string($time);
# $time - value corresponding to openssl's ASN1_TIME structure
#
# returns: datetime string like 'May 16 20:39:37 2033 GMT'
```
P_ASN1_UTCTIME_put2string

NOTE: deprecated function, only for backward compatibility, just an alias for "P_ASN1_TIME_put2string"

X509_new

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Allocates and initializes a X509 structure.
```
my $rv = Net::SSLeay::X509_new();
#
# returns: value corresponding to openssl's X509 structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_new.html

X509_free

Frees up the X509 structure.

Net::SSLeay::X509_free($a);
# $a - value corresponding to openssl's X509 structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/X509_new.html

X509_certificate_type

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns bitmask with type of certificate $x.

my $rv = Net::SSLeay::X509_certificate_type($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: (integer) bitmask with certificate type

#to decode bitmask returned by this function use these constants:
&Net::SSLeay::EVP_PKS_DSA
&Net::SSLeay::EVP_PKS_EC
&Net::SSLeay::EVP_PKS_RSA
&Net::SSLeay::EVP_PKT_ENC
&Net::SSLeay::EVP_PKT_EXCH
&Net::SSLeay::EVP_PKT_EXP
&Net::SSLeay::EVP_PKT_SIGN
&Net::SSLeay::EVP_PK_DH
&Net::SSLeay::EVP_PK_DSA
&Net::SSLeay::EVP_PK_EC
&Net::SSLeay::EVP_PK_RSA

X509_digest

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Computes digest/fingerprint of X509 $data using $type hash function.

my $digest_value = Net::SSLeay::X509_digest($data, $type);
# $data - value corresponding to openssl's X509 structure
# $type - value corresponding to openssl's EVP_MD structure - e.g. got via EVP_get_digestbyname()
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);

X509_issuer_and_serial_hash

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sort of a checksum of issuer name and serial number of X509 certificate $x. The result is not a full hash (e.g. sha-1), it is kind-of-a-hash truncated to the size of 'unsigned long' (32 bits). The resulting value might differ accross different openssl versions for the same X509 certificate.
```
my $rv = Net::SSLeay::X509_issuer_and_serial_hash($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: number representing checksum
```
X509_issuer_name_hash

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sort of a checksum of issuer name of X509 certificate $x. The result is not a full hash (e.g. sha-1), it is kind-of-a-hash truncated to the size of 'unsigned long' (32 bits). The resulting value might differ accross different openssl versions for the same X509 certificate.
```
my $rv = Net::SSLeay::X509_issuer_name_hash($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: number representing checksum
```
X509_subject_name_hash

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sort of a checksum of subject name of X509 certificate $x. The result is not a full hash (e.g. sha-1), it is kind-of-a-hash truncated to the size of 'unsigned long' (32 bits). The resulting value might differ accross different openssl versions for the same X509 certificate.
```
my $rv = Net::SSLeay::X509_subject_name_hash($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: number representing checksum
```

X509_pubkey_digest

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Computes digest/fingerprint of public key from X509 certificate $data using $type hash function.

my $digest_value = Net::SSLeay::X509_pubkey_digest($data, $type);
# $data - value corresponding to openssl's X509 structure
# $type - value corresponding to openssl's EVP_MD structure - e.g. got via EVP_get_digestbyname()
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);

X509_set_issuer_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets issuer of X509 certificate $x to $name.

my $rv = Net::SSLeay::X509_set_issuer_name($x, $name);
# $x - value corresponding to openssl's X509 structure
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: 1 on success, 0 on failure

X509_set_pubkey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets public key of X509 certificate $x to $pkey.

my $rv = Net::SSLeay::X509_set_pubkey($x, $pkey);
# $x - value corresponding to openssl's X509 structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: 1 on success, 0 on failure

X509_set_serialNumber

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets serial number of X509 certificate $x to $serial.

my $rv = Net::SSLeay::X509_set_serialNumber($x, $serial);
# $x - value corresponding to openssl's X509 structure
# $serial - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: 1 on success, 0 on failure

#to create $serial value use one of these:
$serial = Net::SSLeay::P_ASN1_INTEGER_set_hex('45ad6f');
$serial = Net::SSLeay::P_ASN1_INTEGER_set_dec('7896541238529631478');
$serial = Net::SSLeay::ASN1_INTEGER_set(45896);

X509_set_subject_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets subject of X509 certificate $x to $name.

my $rv = Net::SSLeay::X509_set_subject_name($x, $name);
# $x - value corresponding to openssl's X509 structure
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: 1 on success, 0 on failure

X509_set_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Set 'version' value for X509 certificate $ to $version.

my $rv = Net::SSLeay::X509_set_version($x, $version);
# $x - value corresponding to openssl's X509 structure
# $version - (integer) version number
#
# returns: 1 on success, 0 on failure

X509_sign

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sign X509 certificate $x with private key $pkey (using digest algorithm $md).

my $rv = Net::SSLeay::X509_sign($x, $pkey, $md);
# $x - value corresponding to openssl's X509 structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
# $md - value corresponding to openssl's EVP_MD structure
#
# returns: 1 on success, 0 on failure

X509_verify

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Verifies X509 object $a using public key $r (pubkey of issuing CA).

my $rv = Net::SSLeay::X509_verify($x, $r);
# $x - value corresponding to openssl's X509 structure
# $r - value corresponding to openssl's EVP_PKEY structure
#
# returns: 0 - verify failure, 1 - verify OK, <0 - error

X509_get_ext_count

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns the total number of extensions in X509 object $x.

my $rv = Net::SSLeay::X509_get_ext_count($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: count of extensions

X509_get_pubkey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns public key corresponding to given X509 object $x.

my $rv = Net::SSLeay::X509_get_pubkey($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's EVP_PKEY structure (0 on failure)

X509_get_serialNumber

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns serial number of X509 certificate $x.
```
my $rv = Net::SSLeay::X509_get_serialNumber($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's ASN1_INTEGER structure (0 on failure)
```
See "P_ASN1_INTEGER_get_dec", "P_ASN1_INTEGER_get_hex" or "ASN1_INTEGER_get" to decode ASN1_INTEGER object.

X509_get_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'version' value of given X509 certificate $x.

my $rv = Net::SSLeay::X509_get_version($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: (integer) version

X509_get_ext

Returns X509_EXTENSION from $x509 based on given position/index.

my $rv = Net::SSLeay::X509_get_ext($x509, $index);
# $x509 - value corresponding to openssl's X509 structure
# $index - (integer) position/index of extension within $x509
#
# returns: value corresponding to openssl's X509_EXTENSION structure (0 on failure)

X509_get_ext_by_NID

Returns X509_EXTENSION from $x509 based on given NID.

my $rv = Net::SSLeay::X509_get_ext_by_NID($x509, $nid, $loc);
# $x509 - value corresponding to openssl's X509 structure
# $nid - (integer) NID value
# $loc - (integer) position to start lookup at
#
# returns: position/index of extension, negative value on error
#          call Net::SSLeay::X509_get_ext($x509, $rv) to get the actual extension

X509_get_fingerprint

Returns fingerprint of certificate $cert.

NOTE: Does not exactly correspond to any low level API function. The implementation is basen on openssl's X509_digest().

Net::SSLeay::X509_get_fingerprint($x509, $type);
# $x509 - value corresponding to openssl's X509 structure
# $type - (string) digest type, currently supported values:
#         "md5"
#         "sha1"
#         "sha256"
#         "ripemd160"
#
# returns: certificate digest - hexadecimal string (NOT binary data!)

X509_get_issuer_name

Return an X509_NAME object representing the issuer of the certificate $cert.

my $rv = Net::SSLeay::X509_get_issuer_name($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's X509_NAME structure (0 on failure)

X509_get_notAfter

Return an object giving the time after which the certificate $cert is not valid.

my $rv = Net::SSLeay::X509_get_notAfter($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's ASN1_TIME structure (0 on failure)

To get human readable/printable form the return value you can use:

my $time = Net::SSLeay::X509_get_notAfter($cert);
print "notAfter=", Net::SSLeay::P_ASN1_TIME_get_isotime($time), "\n";

X509_get_notBefore

Return an object giving the time before which the certificate $cert is not valid

my $rv = Net::SSLeay::X509_get_notBefore($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's ASN1_TIME structure (0 on failure)

To get human readable/printable form the return value you can use:

my $time = Net::SSLeay::X509_get_notBefore($cert);
print "notBefore=", Net::SSLeay::P_ASN1_TIME_get_isotime($time), "\n";

X509_get_subjectAltNames

NOTE: Does not exactly correspond to any low level API function.

Returns the list of alternative subject names from X509 certificate $cert.

my @rv = Net::SSLeay::X509_get_subjectAltNames($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: list containing pairs - name_type (integer), name_value (string)
#          where name_type can be:
#          0 - GEN_OTHERNAME
#          1 - GEN_EMAIL
#          2 - GEN_DNS
#          3 - GEN_X400
#          4 - GEN_DIRNAME
#          5 - GEN_EDIPARTY
#          6 - GEN_URI
#          7 - GEN_IPADD
#          8 - GEN_RID

X509_get_subject_name

Returns the subject of the certificate $cert.

my $rv = Net::SSLeay::X509_get_subject_name($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's X509_NAME structure (0 on failure)

X509_gmtime_adj

Adjust th ASN1_TIME object to the timestamp (in GMT).
```
my $rv = Net::SSLeay::X509_gmtime_adj($s, $adj);
# $s - value corresponding to openssl's ASN1_TIME structure
# $adj - timestamp (seconds since 1.1.1970)
#
# returns: value corresponding to openssl's ASN1_TIME structure (0 on failure)
```
BEWARE: this function may fail for dates after 2038 as it is dependant on time_t size on your system (32bit time_t does not work after 2038). Consider using "P_ASN1_TIME_set_isotime" instead).

X509_load_cert_crl_file

Takes PEM file and loads all X509 certificates and X509 CRLs from that file into X509_LOOKUP structure.

my $rv = Net::SSLeay::X509_load_cert_crl_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's X509_LOOKUP structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#                          if not FILETYPE_PEM then behaves as Net::SSLeay::X509_load_cert_file()
#
# returns: 1 on success, 0 on failure

X509_load_cert_file

Loads/adds X509 certificate from $file to X509_LOOKUP structure

my $rv = Net::SSLeay::X509_load_cert_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's X509_LOOKUP structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, 0 on failure

X509_load_crl_file

Loads/adds X509 CRL from $file to X509_LOOKUP structure

my $rv = Net::SSLeay::X509_load_crl_file($ctx, $file, $type);
# $ctx - value corresponding to openssl's X509_LOOKUP structure
# $file - (string) file name
# $type - (integer) type - use constants &Net::SSLeay::FILETYPE_PEM or &Net::SSLeay::FILETYPE_ASN1
#
# returns: 1 on success, 0 on failure

X509_policy_level_get0_node

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_level_get0_node($level, $i);
# $level - value corresponding to openssl's X509_POLICY_LEVEL structure
# $i - (integer) index/position
#
# returns: value corresponding to openssl's X509_POLICY_NODE structure (0 on failure)

X509_policy_level_node_count

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_level_node_count($level);
# $level - value corresponding to openssl's X509_POLICY_LEVEL structure
#
# returns: (integer) node count

X509_policy_node_get0_parent

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_node_get0_parent($node);
# $node - value corresponding to openssl's X509_POLICY_NODE structure
#
# returns: value corresponding to openssl's X509_POLICY_NODE structure (0 on failure)

X509_policy_node_get0_policy

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_node_get0_policy($node);
# $node - value corresponding to openssl's X509_POLICY_NODE structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

X509_policy_node_get0_qualifiers

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_node_get0_qualifiers($node);
# $node - value corresponding to openssl's X509_POLICY_NODE structure
#
# returns: value corresponding to openssl's STACK_OF(POLICYQUALINFO) structure (0 on failure)

X509_policy_tree_free

??? (more info needed)

Net::SSLeay::X509_policy_tree_free($tree);
# $tree - value corresponding to openssl's X509_POLICY_TREE structure
#
# returns: no return value

X509_policy_tree_get0_level

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_tree_get0_level($tree, $i);
# $tree - value corresponding to openssl's X509_POLICY_TREE structure
# $i - (integer) level index
#
# returns: value corresponding to openssl's X509_POLICY_LEVEL structure (0 on failure)

X509_policy_tree_get0_policies

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_tree_get0_policies($tree);
# $tree - value corresponding to openssl's X509_POLICY_TREE structure
#
# returns: value corresponding to openssl's X509_POLICY_NODE structure (0 on failure)

X509_policy_tree_get0_user_policies

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_tree_get0_user_policies($tree);
# $tree - value corresponding to openssl's X509_POLICY_TREE structure
#
# returns: value corresponding to openssl's X509_POLICY_NODE structure (0 on failure)

X509_policy_tree_level_count

??? (more info needed)

my $rv = Net::SSLeay::X509_policy_tree_level_count($tree);
# $tree - value corresponding to openssl's X509_POLICY_TREE structure
#
# returns: (integer) count

X509_verify_cert_error_string

Returns a human readable error string for verification error $n.
```
my $rv = Net::SSLeay::X509_verify_cert_error_string($n);
# $n - (long) numeric error code
#
# returns: error string
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_get_error.html

P_X509_add_extensions

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Adds one or more X509 extensions to X509 object $x.

my $rv = Net::SSLeay::P_X509_add_extensions($x, $ca_cert, $nid, $value);
# $x - value corresponding to openssl's X509 structure
# $ca_cert - value corresponding to openssl's X509 structure (issuer's cert - necessary for sertting NID_authority_key_identifier)
# $nid - NID identifying extension to be set
# $value - extension value
#
# returns: 1 on success, 0 on failure

You can set more extensions at once:

my $rv = Net::SSLeay::P_X509_add_extensions($x509, $ca_cert,
               &Net::SSLeay::NID_key_usage => 'digitalSignature,keyEncipherment',
               &Net::SSLeay::NID_subject_key_identifier => 'hash',
               &Net::SSLeay::NID_authority_key_identifier => 'keyid',
               &Net::SSLeay::NID_authority_key_identifier => 'issuer',
               &Net::SSLeay::NID_basic_constraints => 'CA:FALSE',
               &Net::SSLeay::NID_ext_key_usage => 'serverAuth,clientAuth',
               &Net::SSLeay::NID_netscape_cert_type => 'server',
               &Net::SSLeay::NID_subject_alt_name => 'DNS:s1.dom.com,DNS:s2.dom.com,DNS:s3.dom.com',
         );

P_X509_copy_extensions

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Copies X509 extensions from X509_REQ object to X509 object - handy when you need to turn X509_REQ into X509 certificate.

Net::SSLeay::P_X509_copy_extensions($x509_req, $x509, $override);
# $x509_req - value corresponding to openssl's X509_REQ structure
# $x509 - value corresponding to openssl's X509 structure
# $override - (integer) flag indication whether to override already existing items in $x509 (default 1)
#
# returns: 1 on success, 0 on failure

P_X509_get_crl_distribution_points

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Get the list of CRL distribution points from X509 certificate.
```
my @cdp = Net::SSLeay::P_X509_get_crl_distribution_points($x509);
# $x509 - value corresponding to openssl's X509 structure
#
# returns: list of distribution points (usually URLs)
```

P_X509_get_ext_key_usage

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Gets the list of extended key usage of given X509 certificate $cert.

my @ext_usage = Net::SSLeay::P_X509_get_ext_key_usage($cert, $format);
# $cert - value corresponding to openssl's X509 structure
# $format - choose type of return values: 0=OIDs, 1=NIDs, 2=shortnames, 3=longnames
#
# returns: list of values

Examples:

my @extkeyusage_oid = Net::SSLeay::P_X509_get_ext_key_usage($x509,0);
# returns for example: ("1.3.6.1.5.5.7.3.1", "1.3.6.1.5.5.7.3.2")

my @extkeyusage_nid = Net::SSLeay::P_X509_get_ext_key_usage($x509,1);
# returns for example: (129, 130)

my @extkeyusage_sn  = Net::SSLeay::P_X509_get_ext_key_usage($x509,2);
# returns for example: ("serverAuth", "clientAuth")

my @extkeyusage_ln  = Net::SSLeay::P_X509_get_ext_key_usage($x509,3);
# returns for example: ("TLS Web Server Authentication",  "TLS Web Client Authentication")

P_X509_get_key_usage

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Gets the list of key usage of given X509 certificate $cert.

my @keyusage = Net::SSLeay::P_X509_get_key_usage($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: list of key usage values which can be none, one or more from the following list:
#          "digitalSignature"
#          "nonRepudiation"
#          "keyEncipherment"
#          "dataEncipherment"
#          "keyAgreement"
#          "keyCertSign"
#          "cRLSign"
#          "encipherOnly"
#          "decipherOnly"

P_X509_get_netscape_cert_type

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Gets the list of Netscape cert types of given X509 certificate $cert.

Net::SSLeay::P_X509_get_netscape_cert_type($cert);
# $cert - value corresponding to openssl's X509 structure
#
# returns: list of Netscape type values which can be none, one or more from the following list:
#          "client"
#          "server"
#          "email"
#          "objsign"
#          "reserved"
#          "sslCA"
#          "emailCA"
#          "objCA"

P_X509_get_pubkey_alg

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns ASN1_OBJECT corresponding to X509 certificate public key algorithm.

my $rv = Net::SSLeay::P_X509_get_pubkey_alg($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

To get textual representation use:

my $alg = Net::SSLeay::OBJ_obj2txt(Net::SSLeay::P_X509_get_pubkey_alg($x509));
# returns for example: "rsaEncryption"

P_X509_get_signature_alg

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns ASN1_OBJECT corresponding to X509 signarite key algorithm.

my $rv = Net::SSLeay::P_X509_get_signature_alg($x);
# $x - value corresponding to openssl's X509 structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

To get textual representation use:

my $alg = Net::SSLeay::OBJ_obj2txt(Net::SSLeay::P_X509_get_signature_alg($x509))
# returns for example: "sha1WithRSAEncryption"

X509_REQ_new

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Creates a new X509_REQ structure.

my $rv = Net::SSLeay::X509_REQ_new();
#
# returns: value corresponding to openssl's X509_REQ structure (0 on failure)

X509_REQ_free

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Free an allocated X509_REQ structure.

Net::SSLeay::X509_REQ_free($x);
# $x - value corresponding to openssl's X509_REQ structure
#
# returns: no return value

X509_REQ_add1_attr_by_NID

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Adds an attribute whose name is defined by a NID $nid. The field value to be added is in $bytes.

my $rv = Net::SSLeay::X509_REQ_add1_attr_by_NID($req, $nid, $type, $bytes);
# $req - value corresponding to openssl's X509_REQ structure
# $nid - (integer) NID value
# $type - (integer) type of data in $bytes (see below)
# $bytes - data to be set
#
# returns: 1 on success, 0 on failure

# values for $type - use constants:
&Net::SSLeay::MBSTRING_UTF8     - $bytes contains utf8 encoded data
&Net::SSLeay::MBSTRING_ASC      - $bytes contains ASCII data

X509_REQ_digest

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Computes digest/fingerprint of X509_REQ $data using $type hash function.

my $digest_value = Net::SSLeay::X509_REQ_digest($data, $type);
# $data - value corresponding to openssl's X509_REQ structure
# $type - value corresponding to openssl's EVP_MD structure - e.g. got via EVP_get_digestbyname()
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);

X509_REQ_get_attr_by_NID

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Retrieve the next index matching $nid after $lastpos ($lastpos should initially be set to -1).

my $rv = Net::SSLeay::X509_REQ_get_attr_by_NID($req, $nid, $lastpos=-1);
# $req - value corresponding to openssl's X509_REQ structure
# $nid - (integer) NID value
# $lastpos - [optional] (integer) index where to start search (default -1)
#
# returns: index (-1 if there are no more entries)

Note: use "P_X509_REQ_get_attr" to get the actual attribute value - e.g.

my $index = Net::SSLeay::X509_REQ_get_attr_by_NID($req, $nid);
my @attr_values = Net::SSLeay::P_X509_REQ_get_attr($req, $index);

X509_REQ_get_attr_by_OBJ

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Retrieve the next index matching $obj after $lastpos ($lastpos should initially be set to -1).

my $rv = Net::SSLeay::X509_REQ_get_attr_by_OBJ($req, $obj, $lastpos=-1);
# $req - value corresponding to openssl's X509_REQ structure
# $obj - value corresponding to openssl's ASN1_OBJECT structure
# $lastpos - [optional] (integer) index where to start search (default -1)
#
# returns: index (-1 if there are no more entries)

Note: use "P_X509_REQ_get_attr" to get the actual attribute value - e.g.

my $index = Net::SSLeay::X509_REQ_get_attr_by_NID($req, $nid);
my @attr_values = Net::SSLeay::P_X509_REQ_get_attr($req, $index);

X509_REQ_get_attr_count

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns the total number of attributes in $req.

my $rv = Net::SSLeay::X509_REQ_get_attr_count($req);
# $req - value corresponding to openssl's X509_REQ structure
#
# returns: (integer) items count

X509_REQ_get_pubkey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns public key corresponding to given X509_REQ object $x.

my $rv = Net::SSLeay::X509_REQ_get_pubkey($x);
# $x - value corresponding to openssl's X509_REQ structure
#
# returns: value corresponding to openssl's EVP_PKEY structure (0 on failure)

X509_REQ_get_subject_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns X509_NAME object corresponding to subject name of given X509_REQ object $x.

my $rv = Net::SSLeay::X509_REQ_get_subject_name($x);
# $x - value corresponding to openssl's X509_REQ structure
#
# returns: value corresponding to openssl's X509_NAME structure (0 on failure)

X509_REQ_get_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'version' value for given X509_REQ object $x.

my $rv = Net::SSLeay::X509_REQ_get_version($x);
# $x - value corresponding to openssl's X509_REQ structure
#
# returns: (integer) version e.g. 0 = "version 1"

X509_REQ_set_pubkey

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets public key of given X509_REQ object $x to $pkey.

my $rv = Net::SSLeay::X509_REQ_set_pubkey($x, $pkey);
# $x - value corresponding to openssl's X509_REQ structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
#
# returns: 1 on success, 0 on failure

X509_REQ_set_subject_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets subject name of given X509_REQ object $x to X509_NAME object $name.

my $rv = Net::SSLeay::X509_REQ_set_subject_name($x, $name);
# $x - value corresponding to openssl's X509_REQ structure
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: 1 on success, 0 on failure

X509_REQ_set_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sets 'version' of given X509_REQ object $x to $version.

my $rv = Net::SSLeay::X509_REQ_set_version($x, $version);
# $x - value corresponding to openssl's X509_REQ structure
# $version - (integer) e.g. 0 = "version 1"
#
# returns: 1 on success, 0 on failure

X509_REQ_sign

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sign X509_REQ object $x with private key $pk (using digest algorithm $md).

my $rv = Net::SSLeay::X509_REQ_sign($x, $pk, $md);
# $x - value corresponding to openssl's X509_REQ structure
# $pk - value corresponding to openssl's EVP_PKEY structure (requestor's private key)
# $md - value corresponding to openssl's EVP_MD structure
#
# returns: 1 on success, 0 on failure

X509_REQ_verify

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Verifies X509_REQ object $x using public key $r (pubkey of requesting party).

my $rv = Net::SSLeay::X509_REQ_verify($x, $r);
# $x - value corresponding to openssl's X509_REQ structure
# $r - value corresponding to openssl's EVP_PKEY structure
#
# returns: 0 - verify failure, 1 - verify OK, <0 - error

P_X509_REQ_add_extensions

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Adds one or more X509 extensions to X509_REQ object $x.

my $rv = Net::SSLeay::P_X509_REQ_add_extensions($x, $nid, $value);
# $x - value corresponding to openssl's X509_REQ structure
# $nid - NID identifying extension to be set
# $value - extension value
#
# returns: 1 on success, 0 on failure

You can set more extensions at once:

my $rv = Net::SSLeay::P_X509_REQ_add_extensions($x509_req,
           &Net::SSLeay::NID_key_usage => 'digitalSignature,keyEncipherment',
           &Net::SSLeay::NID_basic_constraints => 'CA:FALSE',
           &Net::SSLeay::NID_ext_key_usage => 'serverAuth,clientAuth',
           &Net::SSLeay::NID_netscape_cert_type => 'server',
           &Net::SSLeay::NID_subject_alt_name => 'DNS:s1.com,DNS:s2.com',
           &Net::SSLeay::NID_crl_distribution_points => 'URI:http://pki.com/crl1,URI:http://pki.com/crl2',
         );

P_X509_REQ_get_attr

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Returns attribute value for X509_REQ's attribute at index $n.

Net::SSLeay::P_X509_REQ_get_attr($req, $n);
# $req - value corresponding to openssl's X509_REQ structure
# $n - (integer) attribute index
#
# returns: value corresponding to openssl's ASN1_STRING structure

X509_CRL_new

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Creates a new X509_CRL structure.

my $rv = Net::SSLeay::X509_CRL_new();
#
# returns: value corresponding to openssl's X509_CRL structure (0 on failure)

X509_CRL_free

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Free an allocated X509_CRL structure.

Net::SSLeay::X509_CRL_free($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: no return value

X509_CRL_digest

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Computes digest/fingerprint of X509_CRL $data using $type hash function.

my $digest_value = Net::SSLeay::X509_CRL_digest($data, $type);
# $data - value corresponding to openssl's X509_CRL structure
# $type - value corresponding to openssl's EVP_MD structure - e.g. got via EVP_get_digestbyname()
#
# returns: hash value (binary)

Example:

my $x509_crl
my $md = Net::SSLeay::EVP_get_digestbyname("sha1");
my $digest_value = Net::SSLeay::X509_CRL_digest($x509_crl, $md);
#to get printable (hex) value of digest use:
print "digest=", unpack('H*', $digest_value), "\n";

X509_CRL_get_issuer

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns X509_NAME object corresponding to the issuer of X509_CRL $x.
```
my $rv = Net::SSLeay::X509_CRL_get_issuer($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: value corresponding to openssl's X509_NAME structure (0 on failure)
```
See other X509_NAME_* functions to get more info from X509_NAME structure.

X509_CRL_get_lastUpdate

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'lastUpdate' date-time value of X509_CRL object $x.

my $rv = Net::SSLeay::X509_CRL_get_lastUpdate($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: value corresponding to openssl's ASN1_TIME structure (0 on failure)

X509_CRL_get_nextUpdate

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'nextUpdate' date-time value of X509_CRL object $x.

my $rv = Net::SSLeay::X509_CRL_get_nextUpdate($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: value corresponding to openssl's ASN1_TIME structure (0 on failure)

X509_CRL_get_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'version' value of given X509_CRL structure $x.

my $rv = Net::SSLeay::X509_CRL_get_version($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: (integer) version

X509_CRL_set_issuer_name

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sets the issuer of X509_CRL object $x to X509_NAME object $name.

my $rv = Net::SSLeay::X509_CRL_set_issuer_name($x, $name);
# $x - value corresponding to openssl's X509_CRL structure
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: 1 on success, 0 on failure

X509_CRL_set_lastUpdate

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sets 'lastUpdate' value of X509_CRL object $x to $tm.

my $rv = Net::SSLeay::X509_CRL_set_lastUpdate($x, $tm);
# $x - value corresponding to openssl's X509_CRL structure
# $tm - value corresponding to openssl's ASN1_TIME structure
#
# returns: 1 on success, 0 on failure

X509_CRL_set_nextUpdate

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sets 'nextUpdate' value of X509_CRL object $x to $tm.

my $rv = Net::SSLeay::X509_CRL_set_nextUpdate($x, $tm);
# $x - value corresponding to openssl's X509_CRL structure
# $tm - value corresponding to openssl's ASN1_TIME structure
#
# returns: 1 on success, 0 on failure

X509_CRL_set_version

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sets 'version' value of given X509_CRL structure $x to $version.
```
my $rv = Net::SSLeay::X509_CRL_set_version($x, $version);
# $x - value corresponding to openssl's X509_CRL structure
# $version - (integer) version number (1 = version 2 CRL)
#
# returns: 1 on success, 0 on failure
```
Note that if you want to use any X509_CRL extension you need to set "version 2 CRL" - Net::SSLeay::X509_CRL_set_version($x, 1).

X509_CRL_sign

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Sign X509_CRL object $x with private key $pkey (using digest algorithm $md).

my $rv = Net::SSLeay::X509_CRL_sign($x, $pkey, $md);
# $x - value corresponding to openssl's X509_CRL structure
# $pkey - value corresponding to openssl's EVP_PKEY structure
# $md - value corresponding to openssl's EVP_MD structure
#
# returns: 1 on success, 0 on failure

X509_CRL_sort

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sorts the data of X509_CRL object so it will be written in serial number order.
```
my $rv = Net::SSLeay::X509_CRL_sort($x);
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: 1 on success, 0 on failure
```

X509_CRL_verify

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Verifies X509_CRL object $a using public key $r (pubkey of issuing CA).

my $rv = Net::SSLeay::X509_CRL_verify($a, $r);
# $a - value corresponding to openssl's X509_CRL structure
# $r - value corresponding to openssl's EVP_PKEY structure
#
# returns: 0 - verify failure, 1 - verify OK, <0 - error

P_X509_CRL_add_revoked_serial_hex

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Adds given serian number $serial_hex to X509_CRL object $crl.

Net::SSLeay::P_X509_CRL_add_revoked_serial_hex($crl, $serial_hex, $rev_time, $reason_code, $comp_time);
# $crl - value corresponding to openssl's X509_CRL structure
# $serial_hex - string (hexadecimal) representation of serial number
# $rev_time - (revocation time) value corresponding to openssl's ASN1_TIME structure
# $reason_code - [optional] (integer) reason code (see below) - default 0
# $comp_time - [optional] (compromise time) value corresponding to openssl's ASN1_TIME structure
#
# returns: no return value

reason codes:
0 - unspecified
1 - keyCompromise
2 - CACompromise
3 - affiliationChanged
4 - superseded
5 - cessationOfOperation
6 - certificateHold
7 - removeFromCRL

P_X509_CRL_get_serial

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Returns serial number of X509_CRL object.

my $rv = Net::SSLeay::P_X509_CRL_get_serial($crl);
# $crl - value corresponding to openssl's X509_CRL structure
#
# returns: value corresponding to openssl's ASN1_INTEGER structure (0 on failure)

P_X509_CRL_set_serial

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.7

Sets serial number of X509_CRL object to $crl_number.

my $rv = Net::SSLeay::P_X509_CRL_set_serial($crl, $crl_number);
# $crl - value corresponding to openssl's X509_CRL structure
# $crl_number - value corresponding to openssl's ASN1_INTEGER structure
#
# returns: 1 on success, 0 on failure

X509_EXTENSION_get_critical

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns 'critical' flag of given X509_EXTENSION object $ex.

my $rv = Net::SSLeay::X509_EXTENSION_get_critical($ex);
# $ex - value corresponding to openssl's X509_EXTENSION structure
#
# returns: (integer) 1 - critical, 0 - noncritical

X509_EXTENSION_get_data

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns value (raw data) of X509_EXTENSION object $ne.
```
my $rv = Net::SSLeay::X509_EXTENSION_get_data($ne);
# $ne - value corresponding to openssl's X509_EXTENSION structure
#
# returns: value corresponding to openssl's ASN1_OCTET_STRING structure (0 on failure)
```
Note: you can use "P_ASN1_STRING_get" to convert ASN1_OCTET_STRING into perl scalar variable.

X509_EXTENSION_get_object

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns OID (ASN1_OBJECT) of X509_EXTENSION object $ne.

my $rv = Net::SSLeay::X509_EXTENSION_get_object($ex);
# $ex - value corresponding to openssl's X509_EXTENSION structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)

X509V3_EXT_print

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns string representation of given X509_EXTENSION object $ext.

Net::SSLeay::X509V3_EXT_print($ext, $flags, $utf8_decode);
# $ext - value corresponding to openssl's X509_EXTENSION structure
# $flags - [optional] (integer) Currently the flag argument is unused and should be set to 0
# $utf8_decode - [optional] 0 or 1 whether the returned value should be utf8 decoded (default=0)
#
# returns: no return value

X509V3_EXT_d2i

Parses an extension and returns its internal structure.

my $rv = Net::SSLeay::X509V3_EXT_d2i($ext);
# $ext - value corresponding to openssl's X509_EXTENSION structure
#
# returns: pointer ???

X509_NAME_ENTRY_get_data

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Retrieves the field value of $ne in and ASN1_STRING structure.
```
my $rv = Net::SSLeay::X509_NAME_ENTRY_get_data($ne);
# $ne - value corresponding to openssl's X509_NAME_ENTRY structure
#
# returns: value corresponding to openssl's ASN1_STRING structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_ENTRY_get_object.html
X509_NAME_ENTRY_get_object

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Retrieves the field name of $ne in and ASN1_OBJECT structure.
```
my $rv = Net::SSLeay::X509_NAME_ENTRY_get_object($ne);
# $ne - value corresponding to openssl's X509_NAME_ENTRY structure
#
# returns: value corresponding to openssl's ASN1_OBJECT structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_ENTRY_get_object.html

X509_NAME_add_entry_by_txt

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.5

Adds a field whose name is defined by a string $field. The field value to be added is in $bytes.

my $rv = Net::SSLeay::X509_NAME_add_entry_by_txt($name, $field, $type, $bytes, $len, $loc, $set);
# $name - value corresponding to openssl's X509_NAME structure
# $field - (string) field definition (name) - e.g. "organizationName"
# $type - (integer) type of data in $bytes (see below)
# $bytes - data to be set
# $loc - [optional] (integer) index where the new entry is inserted: if it is -1 (default) it is appended
# $set - [optional] (integer) determines how the new type is added. If it is 0 (default) a new RDN is created
#
# returns: 1 on success, 0 on failure

# values for $type - use constants:
&Net::SSLeay::MBSTRING_UTF8     - $bytes contains utf8 encoded data
&Net::SSLeay::MBSTRING_ASC      - $bytes contains ASCII data

Unicode note: when passing non-ascii (unicode) string in $bytes do not forget to set $flags = &Net::SSLeay::MBSTRING_UTF8 and encode the perl $string via $bytes = encode('utf-8', $string).

Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_add_entry_by_txt.html

X509_NAME_add_entry_by_NID

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.5

Adds a field whose name is defined by a NID $nid. The field value to be added is in $bytes.

my $rv = Net::SSLeay::X509_NAME_add_entry_by_NID($name, $nid, $type, $bytes, $len, $loc, $set);
# $name - value corresponding to openssl's X509_NAME structure
# $nid - (integer) field definition - NID value
# $type - (integer) type of data in $bytes (see below)
# $bytes - data to be set
# $loc - [optional] (integer) index where the new entry is inserted: if it is -1 (default) it is appended
# $set - [optional] (integer) determines how the new type is added. If it is 0 (default) a new RDN is created
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_add_entry_by_txt.html

X509_NAME_add_entry_by_OBJ

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-0.9.5

Adds a field whose name is defined by a object (OID) $obj . The field value to be added is in $bytes.

my $rv = Net::SSLeay::X509_NAME_add_entry_by_OBJ($name, $obj, $type, $bytes, $len, $loc, $set);
# $name - value corresponding to openssl's X509_NAME structure
# $obj - field definition - value corresponding to openssl's ASN1_OBJECT structure
# $type - (integer) type of data in $bytes (see below)
# $bytes - data to be set
# $loc - [optional] (integer) index where the new entry is inserted: if it is -1 (default) it is appended
# $set - [optional] (integer) determines how the new type is added. If it is 0 (default) a new RDN is created
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_add_entry_by_txt.html

X509_NAME_cmp

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Compares two X509_NAME obejcts.

my $rv = Net::SSLeay::X509_NAME_cmp($a, $b);
# $a - value corresponding to openssl's X509_NAME structure
# $b - value corresponding to openssl's X509_NAME structure
#
# returns: 0 if $a matches $b; non zero otherwise

X509_NAME_digest

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Computes digest/fingerprint of X509_NAME $data using $type hash function.

my $digest_value = Net::SSLeay::X509_NAME_digest($data, $type);
# $data - value corresponding to openssl's X509_NAME structure
# $type - value corresponding to openssl's EVP_MD structure - e.g. got via EVP_get_digestbyname()
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);

X509_NAME_entry_count

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns the total number of entries in $name.
```
my $rv = Net::SSLeay::X509_NAME_entry_count($name);
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: (integer) entries count
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_get_index_by_NID.html
X509_NAME_get_entry

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Retrieves the X509_NAME_ENTRY from $name corresponding to index $loc. Acceptable values for $loc run from 0 to Net::SSLeay::X509_NAME_entry_count($name)- 1. The value returned is an internal pointer which must not be freed.
```
my $rv = Net::SSLeay::X509_NAME_get_entry($name, $loc);
# $name - value corresponding to openssl's X509_NAME structure
# $loc - (integer) index of wanted entry
#
# returns: value corresponding to openssl's X509_NAME_ENTRY structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_get_index_by_NID.html

X509_NAME_print_ex

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns a string with human readable version of $name.

Net::SSLeay::X509_NAME_print_ex($name, $flags, $utf8_decode);
# $name - value corresponding to openssl's X509_NAME structure
# $flags - [optional] conversion flags (default XN_FLAG_RFC2253) - see below
# $utf8_decode - [optional] 0 or 1 whether the returned value should be utf8 decoded (default=0)
#
# returns: string representation of $name

#available conversion flags - use constants:
&Net::SSLeay::XN_FLAG_COMPAT
&Net::SSLeay::XN_FLAG_DN_REV
&Net::SSLeay::XN_FLAG_DUMP_UNKNOWN_FIELDS
&Net::SSLeay::XN_FLAG_FN_ALIGN
&Net::SSLeay::XN_FLAG_FN_LN
&Net::SSLeay::XN_FLAG_FN_MASK
&Net::SSLeay::XN_FLAG_FN_NONE
&Net::SSLeay::XN_FLAG_FN_OID
&Net::SSLeay::XN_FLAG_FN_SN
&Net::SSLeay::XN_FLAG_MULTILINE
&Net::SSLeay::XN_FLAG_ONELINE
&Net::SSLeay::XN_FLAG_RFC2253
&Net::SSLeay::XN_FLAG_SEP_COMMA_PLUS
&Net::SSLeay::XN_FLAG_SEP_CPLUS_SPC
&Net::SSLeay::XN_FLAG_SEP_MASK
&Net::SSLeay::XN_FLAG_SEP_MULTILINE
&Net::SSLeay::XN_FLAG_SEP_SPLUS_SPC
&Net::SSLeay::XN_FLAG_SPC_EQ

Most likely you will be fine with default:

Net::SSLeay::X509_NAME_print_ex($name, &Net::SSLeay::XN_FLAG_RFC2253);

Or you might want RFC2253-like output without utf8 chars escaping:

use Net::SSLeay qw/XN_FLAG_RFC2253 ASN1_STRFLGS_ESC_MSB/;
my $flag_rfc22536_utf8 = (XN_FLAG_RFC2253) & (~ ASN1_STRFLGS_ESC_MSB);
my $result = Net::SSLeay::X509_NAME_print_ex($name, $flag_rfc22536_utf8, 1);

Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_print_ex.html

X509_NAME_get_text_by_NID

Retrieves the text from the first entry in name which matches $nid, if no such entry exists -1 is returned.

openssl note: this is a legacy function which has various limitations which makes it of minimal use in practice. It can only find the first matching entry and will copy the contents of the field verbatim: this can be highly confusing if the target is a muticharacter string type like a BMPString or a UTF8String.
```
Net::SSLeay::X509_NAME_get_text_by_NID($name, $nid);
# $name - value corresponding to openssl's X509_NAME structure
# $nid - NID value (integer)
#
# returns: text value
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_get_index_by_NID.html

X509_NAME_oneline

Return an ASCII version of $name.

Net::SSLeay::X509_NAME_oneline($name);
# $name - value corresponding to openssl's X509_NAME structure
#
# returns: (string) ASCII version of $name

Check openssl doc http://www.openssl.org/docs/crypto/X509_NAME_print_ex.html

sk_X509_NAME_free

Free an allocated STACK_OF(X509_NAME) structure.

Net::SSLeay::sk_X509_NAME_free($sk);
# $sk - value corresponding to openssl's STACK_OF(X509_NAME) structure
#
# returns: no return value

sk_X509_NAME_num

Return number of items in STACK_OF(X509_NAME)

my $rv = Net::SSLeay::sk_X509_NAME_num($sk);
# $sk - value corresponding to openssl's STACK_OF(X509_NAME) structure
#
# returns: number of items

sk_X509_NAME_value

Returns X509_NAME from position $index in STACK_OF(X509_NAME)

my $rv = Net::SSLeay::sk_X509_NAME_value($sk, $i);
# $sk - value corresponding to openssl's STACK_OF(X509_NAME) structure
# $i - (integer) index/position
#
# returns: value corresponding to openssl's X509_NAME structure (0 on failure)

add_file_cert_subjects_to_stack

Add a file of certs to a stack. All certs in $file that are not already in the $stackCAs will be added.

my $rv = Net::SSLeay::add_file_cert_subjects_to_stack($stackCAs, $file);
# $stackCAs - value corresponding to openssl's STACK_OF(X509_NAME) structure
# $file - (string) filename
#
# returns: 1 on success, 0 on failure

add_dir_cert_subjects_to_stack

Add a directory of certs to a stack. All certs in $dir that are not already in the $stackCAs will be added.

my $rv = Net::SSLeay::add_dir_cert_subjects_to_stack($stackCAs, $dir);
# $stackCAs - value corresponding to openssl's STACK_OF(X509_NAME) structure
# $dir - (string) the directory to append from. All files in this directory will be examined as potential certs. Any that are acceptable to SSL_add_dir_cert_subjects_to_stack() that are not already in the stack will be included.
#
# returns: 1 on success, 0 on failure

X509_STORE_CTX_get_current_cert

Returns the certificate in ctx which caused the error or 0 if no certificate is relevant.

my $rv = Net::SSLeay::X509_STORE_CTX_get_current_cert($x509_store_ctx);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
#
# returns: value corresponding to openssl's X509 structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_get_error.html

X509_STORE_CTX_get_error

Returns the error code of $ctx.
```
my $rv = Net::SSLeay::X509_STORE_CTX_get_error($x509_store_ctx);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
#
# returns: (integer) error code
```
For more info about erro code values check function "get_verify_result".

Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_get_error.html
X509_STORE_CTX_get_error_depth

Returns the depth of the error. This is a non-negative integer representing where in the certificate chain the error occurred. If it is zero it occured in the end entity certificate, one if it is the certificate which signed the end entity certificate and so on.
```
my $rv = Net::SSLeay::X509_STORE_CTX_get_error_depth($x509_store_ctx);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
#
# returns: (integer) depth
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_get_error.html

X509_STORE_CTX_get_ex_data

Is used to retrieve the information for $idx from $x509_store_ctx.

my $rv = Net::SSLeay::X509_STORE_CTX_get_ex_data($x509_store_ctx, $idx);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
# $idx - (integer) index for application specific data
#
# returns: pointer to ???

X509_STORE_CTX_set_ex_data

Is used to store application data at arg for idx into $x509_store_ctx.

my $rv = Net::SSLeay::X509_STORE_CTX_set_ex_data($x509_store_ctx, $idx, $data);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
# $idx - (integer) ???
# $data - (pointer) ???
#
# returns: 1 on success, 0 on failure

X509_STORE_CTX_set_cert

Sets the certificate to be vertified in $x509_store_ctx to $x.

Net::SSLeay::X509_STORE_CTX_set_cert($x509_store_ctx, $x);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
# $x - value corresponding to openssl's X509 structure
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_new.html

X509_STORE_CTX_set_error

Sets the error code of $ctx to $s. For example it might be used in a verification callback to set an error based on additional checks.
```
Net::SSLeay::X509_STORE_CTX_set_error($x509_store_ctx, $s);
# $x509_store_ctx - value corresponding to openssl's X509_STORE_CTX structure
# $s - (integer) error id
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_STORE_CTX_get_error.html

X509_STORE_add_cert

Adds X509 certificate $x into the X509_STORE $store.

my $rv = Net::SSLeay::X509_STORE_add_cert($store, $x);
# $store - value corresponding to openssl's X509_STORE structure
# $x - value corresponding to openssl's X509 structure
#
# returns: 1 on success, 0 on failure

X509_STORE_add_crl

Adds X509 CRL $x into the X509_STORE $store.

my $rv = Net::SSLeay::X509_STORE_add_crl($store, $x);
# $store - value corresponding to openssl's X509_STORE structure
# $x - value corresponding to openssl's X509_CRL structure
#
# returns: 1 on success, 0 on failure

X509_STORE_set1_param

??? (more info needed)

my $rv = Net::SSLeay::X509_STORE_set1_param($store, $pm);
# $store - value corresponding to openssl's X509_STORE structure
# $pm - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

X509_STORE_set_flags

Net::SSLeay::X509_STORE_set_flags($ctx, $flags);
# $ctx - value corresponding to openssl's X509_STORE structure
# $flags - (unsigned long) flags to be set (bitmask)
#
# returns: no return value

#to create $flags value use:
0x0001 - X509_V_FLAG_CB_ISSUER_CHECK - Send issuer+subject checks to verify_cb
0x0002 - X509_V_FLAG_USE_CHECK_TIME - Use check time instead of current time
0x0004 - X509_V_FLAG_CRL_CHECK - Lookup CRLs
0x0008 - X509_V_FLAG_CRL_CHECK_ALL - Lookup CRLs for whole chain
0x0010 - X509_V_FLAG_IGNORE_CRITICAL - Ignore unhandled critical extensions
0x0020 - X509_V_FLAG_X509_STRICT - Disable workarounds for broken certificates
0x0040 - X509_V_FLAG_ALLOW_PROXY_CERTS - Enable proxy certificate validation
0x0080 - X509_V_FLAG_POLICY_CHECK - Enable policy checking
0x0100 - X509_V_FLAG_EXPLICIT_POLICY - Policy variable require-explicit-policy
0x0200 - X509_V_FLAG_INHIBIT_ANY - Policy variable inhibit-any-policy
0x0400 - X509_V_FLAG_INHIBIT_MAP - Policy variable inhibit-policy-mapping
0x0800 - X509_V_FLAG_NOTIFY_POLICY - Notify callback that policy is OK
0x1000 - X509_V_FLAG_EXTENDED_CRL_SUPPORT - Extended CRL features such as indirect CRLs, alternate CRL signing keys
0x2000 - X509_V_FLAG_USE_DELTAS - Delta CRL support
0x4000 - X509_V_FLAG_CHECK_SS_SIGNATURE - Check selfsigned CA signature

#or use corresponding constants like
$flags = &Net::SSLeay::X509_V_FLAG_CB_ISSUER_CHECK;
...
$flags = &Net::SSLeay::X509_V_FLAG_CHECK_SS_SIGNATURE;

X509_STORE_set_purpose

Net::SSLeay::X509_STORE_set_purpose($ctx, $purpose);
# $ctx - value corresponding to openssl's X509_STORE structure
# $purpose - (integer) purpose identifier
#
# returns: no return value

For more details about $purpose identifier check "CTX_set_purpose".

X509_STORE_set_trust

Net::SSLeay::X509_STORE_set_trust($ctx, $trust);
# $ctx - value corresponding to openssl's X509_STORE structure
# $trust - (integer) trust identifier
#
# returns: no return value

For more details about $trust identifier check "CTX_set_trust".

X509_VERIFY_PARAM_add0_policy

Enables policy checking (it is disabled by default) and adds $policy to the acceptable policy set.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_add0_policy($param, $policy);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $policy - value corresponding to openssl's ASN1_OBJECT structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_add0_table

??? (more info needed)

my $rv = Net::SSLeay::X509_VERIFY_PARAM_add0_table($param);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

X509_VERIFY_PARAM_clear_flags

Clears the flags $flags in param.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_clear_flags($param, $flags);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $flags - (unsigned long) flags to be set (bitmask)
#
# returns: 1 on success, 0 on failure

For more details about $flags bitmask see "X509_STORE_set_flags".

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_free

Frees up the X509_VERIFY_PARAM structure.

Net::SSLeay::X509_VERIFY_PARAM_free($param);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: no return value

X509_VERIFY_PARAM_get_depth

Returns the current verification depth.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_get_depth($param);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: (ineger) depth

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_get_flags

Returns the current verification flags.
```
my $rv = Net::SSLeay::X509_VERIFY_PARAM_get_flags($param);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: (unsigned long) flags to be set (bitmask)
```
For more details about returned flags bitmask see "X509_STORE_set_flags".

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_set_flags

my $rv = Net::SSLeay::X509_VERIFY_PARAM_set_flags($param, $flags);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $flags - (unsigned long) flags to be set (bitmask)
#
# returns: 1 on success, 0 on failure

For more details about $flags bitmask see "X509_STORE_set_flags".

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_inherit

??? (more info needed)

my $rv = Net::SSLeay::X509_VERIFY_PARAM_inherit($to, $from);
# $to - value corresponding to openssl's X509_VERIFY_PARAM structure
# $from - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

X509_VERIFY_PARAM_lookup

Finds X509_VERIFY_PARAM by name.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_lookup($name);
# $name - (string) name we want to find
#
# returns: value corresponding to openssl's X509_VERIFY_PARAM structure (0 on failure)

X509_VERIFY_PARAM_new

Creates a new X509_VERIFY_PARAM structure.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_new();
#
# returns: value corresponding to openssl's X509_VERIFY_PARAM structure (0 on failure)

X509_VERIFY_PARAM_set1

Sets the name of X509_VERIFY_PARAM structure $to to the same value as the name of X509_VERIFY_PARAM structure $from.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_set1($to, $from);
# $to - value corresponding to openssl's X509_VERIFY_PARAM structure
# $from - value corresponding to openssl's X509_VERIFY_PARAM structure
#
# returns: 1 on success, 0 on failure

X509_VERIFY_PARAM_set1_name

Sets the name of X509_VERIFY_PARAM structure $param to $name.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_set1_name($param, $name);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $name - (string) name to be set
#
# returns: 1 on success, 0 on failure

X509_VERIFY_PARAM_set1_policies

Enables policy checking (it is disabled by default) and sets the acceptable policy set to policies. Any existing policy set is cleared. The policies parameter can be 0 to clear an existing policy set.
```
my $rv = Net::SSLeay::X509_VERIFY_PARAM_set1_policies($param, $policies);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $policies - value corresponding to openssl's STACK_OF(ASN1_OBJECT) structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html
X509_VERIFY_PARAM_set_depth

Sets the maximum verification depth to depth. That is the maximum number of untrusted CA certificates that can appear in a chain.
```
Net::SSLeay::X509_VERIFY_PARAM_set_depth($param, $depth);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $depth - (integer) depth to be set
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html
X509_VERIFY_PARAM_set_purpose

Sets the verification purpose in $param to $purpose. This determines the acceptable purpose of the certificate chain, for example SSL client or SSL server.
```
my $rv = Net::SSLeay::X509_VERIFY_PARAM_set_purpose($param, $purpose);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $purpose - (integer) purpose identifier
#
# returns: 1 on success, 0 on failure
```
For more details about $purpose identifier check "CTX_set_purpose".

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_set_time

Sets the verification time in $param to $t. Normally the current time is used.

Net::SSLeay::X509_VERIFY_PARAM_set_time($param, $t);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $t - (time_t) time in seconds since 1.1.1970
#
# returns: no return value

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_set_trust

Sets the trust setting in $param to $trust.

my $rv = Net::SSLeay::X509_VERIFY_PARAM_set_trust($param, $trust);
# $param - value corresponding to openssl's X509_VERIFY_PARAM structure
# $trust - (integer) trust identifier
#
# returns: 1 on success, 0 on failure

For more details about $trust identifier check "CTX_set_trust".

Check openssl doc http://www.openssl.org/docs/crypto/X509_VERIFY_PARAM_set_flags.html

X509_VERIFY_PARAM_table_cleanup

??? (more info needed)

Net::SSLeay::X509_VERIFY_PARAM_table_cleanup();
#
# returns: no return value

EVP_get_cipherbyname

COMPATIBILITY: not available in Net-SSLeay-1.45 and before

Returns an EVP_CIPHER structure when passed a cipher name.
```
my $rv = Net::SSLeay::EVP_get_cipherbyname($name);
# $name - (string) cipher name e.g. 'aes-128-cbc', 'camellia-256-ecb', 'des-ede', ...
#
# returns: value corresponding to openssl's EVP_CIPHER structure
```
Check openssl doc http://www.openssl.org/docs/crypto/EVP_EncryptInit.html

OpenSSL_add_all_digests

COMPATIBILITY: not available in Net-SSLeay-1.42 and before
```
Net::SSLeay::OpenSSL_add_all_digests();
# no args, no return value
```
http://www.openssl.org/docs/crypto/OpenSSL_add_all_algorithms.html
P_EVP_MD_list_all

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-1.0.0

NOTE: Does not exactly correspond to any low level API function
```
my $rv = Net::SSLeay::P_EVP_MD_list_all();
#
# returns: arrayref - list of available digest names
```
The returned digest names correspond to values expected by "EVP_get_digestbyname".

Note that some of the digets are available by default and some only after calling "OpenSSL_add_all_digests".

EVP_get_digestbyname

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

my $rv = Net::SSLeay::EVP_get_digestbyname($name);
# $name - string with digest name
#
# returns: value corresponding to openssl's EVP_MD structure

The $name param can be:

md2
md4
md5
mdc2
ripemd160
sha
sha1
sha224
sha256
sha512
whirlpool

Or better check the supported digests by calling "P_EVP_MD_list_all".

EVP_MD_type

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

my $rv = Net::SSLeay::EVP_MD_type($md);
# $md - value corresponding to openssl's EVP_MD structure
#
# returns: the NID (integer) of the OBJECT IDENTIFIER representing the given message digest

EVP_MD_size

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

my $rv = Net::SSLeay::EVP_MD_size($md);
# $md - value corresponding to openssl's EVP_MD structure
#
# returns: the size of the message digest in bytes (e.g. 20 for SHA1)

EVP_MD_CTX_md

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Net::SSLeay::EVP_MD_CTX_md($ctx);
# $ctx - value corresponding to openssl's EVP_MD_CTX structure
#
# returns: value corresponding to openssl's EVP_MD structure

EVP_MD_CTX_create

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Allocates, initializes and returns a digest context.

my $rv = Net::SSLeay::EVP_MD_CTX_create();
#
# returns: value corresponding to openssl's EVP_MD_CTX structure

The complete idea behind EVP_MD_CTX looks like this example:

Net::SSLeay::OpenSSL_add_all_digests();

my $md = Net::SSLeay::EVP_get_digestbyname("sha1");
my $ctx = Net::SSLeay::EVP_MD_CTX_create();
Net::SSLeay::EVP_DigestInit($ctx, $md);

while(my $chunk = get_piece_of_data()) {
  Net::SSLeay::EVP_DigestUpdate($ctx,$chunk);
}

my $result = Net::SSLeay::EVP_DigestFinal($ctx);
Net::SSLeay::EVP_MD_CTX_destroy($ctx);

print "digest=", unpack('H*', $result), "\n"; #print hex value

EVP_DigestInit_ex

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Sets up digest context $ctx to use a digest $type from ENGINE $impl, $ctx must be initialized before calling this function, type will typically be supplied by a function such as "EVP_get_digestbyname". If $impl is 0 then the default implementation of digest $type is used.
```
my $rv = Net::SSLeay::EVP_DigestInit_ex($ctx, $type, $impl);
# $ctx  - value corresponding to openssl's EVP_MD_CTX structure
# $type - value corresponding to openssl's EVP_MD structure
# $impl - value corresponding to openssl's ENGINE structure
#
# returns: 1 for success and 0 for failure
```
EVP_DigestInit

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Behaves in the same way as "EVP_DigestInit_ex" except the passed context $ctx does not have to be initialized, and it always uses the default digest implementation.
```
my $rv = Net::SSLeay::EVP_DigestInit($ctx, $type);
# $ctx - value corresponding to openssl's EVP_MD_CTX structure
# $type - value corresponding to openssl's EVP_MD structure
#
# returns: 1 for success and 0 for failure
```
EVP_MD_CTX_destroy

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Cleans up digest context $ctx and frees up the space allocated to it, it should be called only on a context created using "EVP_MD_CTX_create".
```
Net::SSLeay::EVP_MD_CTX_destroy($ctx);
# $ctx - value corresponding to openssl's EVP_MD_CTX structure
#
# returns: no return value
```

EVP_DigestUpdate

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

my $rv = Net::SSLeay::EVP_DigestUpdate($ctx, $data);
# $ctx  - value corresponding to openssl's EVP_MD_CTX structure
# $data - data to be hashed
#
# returns: 1 for success and 0 for failure

EVP_DigestFinal_ex

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Retrieves the digest value from $ctx. After calling "EVP_DigestFinal_ex" no additional calls to "EVP_DigestUpdate" can be made, but "EVP_DigestInit_ex" can be called to initialize a new digest operation.
```
my $digest_value = Net::SSLeay::EVP_DigestFinal_ex($ctx);
# $ctx - value corresponding to openssl's EVP_MD_CTX structure
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);
```

EVP_DigestFinal

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Similar to "EVP_DigestFinal_ex" except the digest context ctx is automatically cleaned up.

my $rv = Net::SSLeay::EVP_DigestFinal($ctx);
# $ctx - value corresponding to openssl's EVP_MD_CTX structure
#
# returns: hash value (binary)

#to get printable (hex) value of digest use:
print unpack('H*', $digest_value);

MD2

COMPATIBILITY: no supported by default in openssl-1.0.0

Computes MD2 from given $data (all data needs to be loaded into memory)
```
my $digest = Net::SSLeay::MD2($data);
print "digest(hexadecimal)=", unpack('H*', $digest);
```

MD4

Computes MD4 from given $data (all data needs to be loaded into memory)

my $digest = Net::SSLeay::MD4($data);
print "digest(hexadecimal)=", unpack('H*', $digest);

MD5

Computes MD5 from given $data (all data needs to be loaded into memory)

my $digest = Net::SSLeay::MD5($data);
print "digest(hexadecimal)=", unpack('H*', $digest);

RIPEMD160

Computes RIPEMD160 from given $data (all data needs to be loaded into memory)

my $digest = Net::SSLeay::RIPEMD160($data);
print "digest(hexadecimal)=", unpack('H*', $digest);

SHA1

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

Computes SHA1 from given $data (all data needs to be loaded into memory)
```
my $digest = Net::SSLeay::SHA1($data);
print "digest(hexadecimal)=", unpack('H*', $digest);
```
SHA256

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.8

Computes SHA256 from given $data (all data needs to be loaded into memory)
```
my $digest = Net::SSLeay::SHA256($data);
print "digest(hexadecimal)=", unpack('H*', $digest);
```
SHA512

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.8

Computes SHA512 from given $data (all data needs to be loaded into memory)
```
my $digest = Net::SSLeay::SHA512($data);
print "digest(hexadecimal)=", unpack('H*', $digest);
```
EVP_Digest

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.7

Computes "any" digest from given $data (all data needs to be loaded into memory)
```
my $md = Net::SSLeay::EVP_get_digestbyname("sha1"); #or any other algorithm
my $digest = Net::SSLeay::EVP_Digest($data, $md);
print "digest(hexadecimal)=", unpack('H*', $digest);
```

EVP_sha1

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

my $md = Net::SSLeay::EVP_sha1();
#
# returns: value corresponding to openssl's EVP_MD structure

EVP_sha256

COMPATIBILITY: requires at least openssl-0.9.8

my $md = Net::SSLeay::EVP_sha256();
#
# returns: value corresponding to openssl's EVP_MD structure

EVP_sha512

COMPATIBILITY: not available in Net-SSLeay-1.42 and before; requires at least openssl-0.9.8
```
my $md = Net::SSLeay::EVP_sha512();
#
# returns: value corresponding to openssl's EVP_MD structure
```

EVP_add_digest

my $rv = Net::SSLeay::EVP_add_digest($digest);
# $digest - value corresponding to openssl's EVP_MD structure
#
# returns: 1 on success, 0 otherwise

CIPHER_get_name

COMPATIBILITY: not available in Net-SSLeay-1.42 and before

Returns name of the cipher used.

my $rv = Net::SSLeay::CIPHER_description($cipher);
# $cipher - value corresponding to openssl's SSL_CIPHER structure
#
# returns: (string) cipher name e.g. 'DHE-RSA-AES256-SHA'

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CIPHER_get_name.html

Example:

my $ssl_cipher = Net::SSLeay::get_current_cipher($ssl);
my $cipher_name = Net::SSLeay::CIPHER_get_name($ssl_cipher);

CIPHER_description

Returns a textual description of the cipher used.

??? (does this function really work?)

my $rv = Net::SSLeay::CIPHER_description($cipher, $buf, $size);
# $cipher - value corresponding to openssl's SSL_CIPHER structure
# $bufer - (string/buffer) ???
# $size - (integer) ???
#
# returns: (string) cipher description e.g. 'DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1'

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CIPHER_get_name.html

CIPHER_get_bits

Returns the number of secret bits used for cipher.

my $rv = Net::SSLeay::CIPHER_get_bits($c);
# $c - value corresponding to openssl's SSL_CIPHER structure
#
# returns: (integert) number of secret bits, 0 on error

Check openssl doc http://www.openssl.org/docs/ssl/SSL_CIPHER_get_name.html

RSA_generate_key

Generates a key pair and returns it in a newly allocated RSA structure. The pseudo-random number generator must be seeded prior to calling RSA_generate_key.

my $rv = Net::SSLeay::RSA_generate_key($bits, $e, $perl_cb, $perl_cb_arg);
# $bits - (integer) modulus size in bits e.g. 512, 1024, 2048
# $e - (integer) public exponent, an odd number, typically 3, 17 or 65537
# $perl_cb - [optional] reference to perl callback function
# $perl_cb_arg - [optional] data that will be passed to callback function when invoked
#
# returns: value corresponding to openssl's RSA structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/RSA_generate_key.html

RSA_free

Frees the RSA structure and its components. The key is erased before the memory is returned to the system.
```
Net::SSLeay::RSA_free($r);
# $r - value corresponding to openssl's RSA structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/RSA_new.html

BIO_eof

Returns 1 if the BIO has read EOF, the precise meaning of 'EOF' varies according to the BIO type.
```
my $rv = Net::SSLeay::BIO_eof($s);
# $s - value corresponding to openssl's BIO structure
#
# returns: 1 if EOF has been reached 0 otherwise
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_ctrl.html
BIO_f_ssl

Returns the SSL BIO method. This is a filter BIO which is a wrapper round the OpenSSL SSL routines adding a BIO 'flavour' to SSL I/O.
```
my $rv = Net::SSLeay::BIO_f_ssl();
#
# returns: value corresponding to openssl's BIO_METHOD structure (0 on failure)
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html

BIO_free

Frees up a single BIO.

my $rv = Net::SSLeay::BIO_free($bio;);
# $bio; - value corresponding to openssl's BIO structure
#
# returns: 1 on success, 0 on failure

Check openssl doc http://www.openssl.org/docs/crypto/BIO_new.html

BIO_new

Returns a new BIO using method $type

my $rv = Net::SSLeay::BIO_new($type);
# $type - value corresponding to openssl's BIO_METHOD structure
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_new.html

BIO_new_buffer_ssl_connect

Creates a new BIO chain consisting of a buffering BIO, an SSL BIO (using ctx) and a connect BIO.

my $rv = Net::SSLeay::BIO_new_buffer_ssl_connect($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html

BIO_new_file

Creates a new file BIO with mode mode the meaning of mode is the same as the stdio function fopen(). The BIO_CLOSE flag is set on the returned BIO.

my $rv = Net::SSLeay::BIO_new_file($filename, $mode);
# $filename - (string) filename
# $mode - (string) opening mode (as mode by stdio function fopen)
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_s_file.html

BIO_new_ssl

Allocates an SSL BIO using SSL_CTX ctx and using client mode if client is non zero.

my $rv = Net::SSLeay::BIO_new_ssl($ctx, $client);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $client - (integer) 0 or 1 - indicates ssl client mode
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html

BIO_new_ssl_connect

Creates a new BIO chain consisting of an SSL BIO (using ctx) followed by a connect BIO.

my $rv = Net::SSLeay::BIO_new_ssl_connect($ctx);
# $ctx - value corresponding to openssl's SSL_CTX structure
#
# returns: value corresponding to openssl's BIO structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html

BIO_pending

Return the number of pending characters in the BIOs read buffers.
```
my $rv = Net::SSLeay::BIO_pending($s);
# $s - value corresponding to openssl's BIO structure
#
# returns: the amount of pending data
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_ctrl.html
BIO_wpending

Return the number of pending characters in the BIOs write buffers.
```
my $rv = Net::SSLeay::BIO_wpending($s);
# $s - value corresponding to openssl's BIO structure
#
# returns: the amount of pending data
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_ctrl.html

BIO_read

Read the underlying descriptor.

Net::SSLeay::BIO_read($s, $max);
# $s - value corresponding to openssl's BIO structure
# $max - [optional] max. bytes to read (if not specified, the value 32768 is used)
#
# returns: data

Check openssl doc http://www.openssl.org/docs/crypto/BIO_read.html

BIO_write

Attempts to write data from $buffer to BIO $b.

my $rv = Net::SSLeay::BIO_write($b, $buffer);
# $b - value corresponding to openssl's BIO structure
# $buffer - data
#
# returns: amount of data successfully written
#          or that no data was successfully read or written if the result is 0 or -1
#          or -2 when the operation is not implemented in the specific BIO type

Check openssl doc http://www.openssl.org/docs/crypto/BIO_read.html

BIO_s_mem

Return the memory BIO method function.

my $rv = Net::SSLeay::BIO_s_mem();
#
# returns: value corresponding to openssl's BIO_METHOD structure (0 on failure)

Check openssl doc http://www.openssl.org/docs/crypto/BIO_s_mem.html

BIO_ssl_copy_session_id

Copies an SSL session id between BIO chains from and to. It does this by locating the SSL BIOs in each chain and calling SSL_copy_session_id() on the internal SSL pointer.
```
my $rv = Net::SSLeay::BIO_ssl_copy_session_id($to, $from);
# $to - value corresponding to openssl's BIO structure
# $from - value corresponding to openssl's BIO structure
#
# returns: 1 on success, 0 on failure
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html
BIO_ssl_shutdown

Closes down an SSL connection on BIO chain bio. It does this by locating the SSL BIO in the chain and calling SSL_shutdown() on its internal SSL pointer.
```
Net::SSLeay::BIO_ssl_shutdown($ssl_bio);
# $ssl_bio - value corresponding to openssl's BIO structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/BIO_f_ssl.html

Simple approach for using NPN support looks like this:

### client side
use Net::SSLeay;
use IO::Socket::INET;

Net::SSLeay::initialize();
my $sock = IO::Socket::INET->new(PeerAddr=>'encrypted.google.com:443') or die;
my $ctx = Net::SSLeay::CTX_tlsv1_new() or die;
Net::SSLeay::CTX_set_options($ctx, &Net::SSLeay::OP_ALL);
Net::SSLeay::CTX_set_next_proto_select_cb($ctx, ['http1.1','spdy/2']);
my $ssl = Net::SSLeay::new($ctx) or die;
Net::SSLeay::set_fd($ssl, fileno($sock)) or die;
Net::SSLeay::connect($ssl);

warn "client:negotiated=",Net::SSLeay::P_next_proto_negotiated($ssl), "\n";
warn "client:last_status=", Net::SSLeay::P_next_proto_last_status($ssl), "\n";

### server side 
use Net::SSLeay;
use IO::Socket::INET;

Net::SSLeay::initialize();
my $ctx = Net::SSLeay::CTX_tlsv1_new() or die;
Net::SSLeay::CTX_set_options($ctx, &Net::SSLeay::OP_ALL);
Net::SSLeay::set_cert_and_key($ctx, "t/data/cert.pem", "t/data/key.pem");
Net::SSLeay::CTX_set_next_protos_advertised_cb($ctx, ['spdy/2','http1.1']);
my $sock = IO::Socket::INET->new(LocalAddr=>'localhost', LocalPort=>5443, Proto=>'tcp', Listen=>20) or die;

while (1) {
  my $ssl = Net::SSLeay::new($ctx);
  warn("server:waiting for incomming connection...\n");
  my $fd = $sock->accept();
  Net::SSLeay::set_fd($ssl, $fd->fileno);
  Net::SSLeay::accept($ssl);  
  warn "server:negotiated=",Net::SSLeay::P_next_proto_negotiated($ssl),"\n";
  my $got = Net::SSLeay::read($ssl);
  Net::SSLeay::ssl_write_all($ssl, "length=".length($got));
  Net::SSLeay::free($ssl);
  $fd->close();
}
# check with: openssl s_client -connect localhost:5443 -nextprotoneg http/1.1,spdy/2

Please note that the selection (negotiation) is performed by client side, the server side simply advertise the list of supported protocols.

Advanced approach allows you to implement your own negotiation algorithm.

#see below documentation for:
Net::SSleay::CTX_set_next_proto_select_cb($ctx, $perl_callback_function, $callback_data);
Net::SSleay::CTX_set_next_protos_advertised_cb($ctx, $perl_callback_function, $callback_data);

Detection of NPN support (works even in older Net::SSLeay versions):

use Net::SSLeay;

if (exists &Net::SSLeay::P_next_proto_negotiated) {
  # do NPN stuff
}

CTX_set_next_proto_select_cb

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-1.0.1

NOTE: You need CTX_set_next_proto_select_cb on client side of SSL connection.

Simple usage - in this case a "common" negotiation algoritm (as implemented by openssl's function SSL_select_next_proto) is used.

$rv = Net::SSleay::CTX_set_next_proto_select_cb($ctx, $arrayref);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $arrayref - list of accepted protocols - e.g. ['http1.0', 'http1.1']
#
# returns: 0 on success, 1 on failure

Advanced usage (you probably do not need this):

$rv = Net::SSleay::CTX_set_next_proto_select_cb($ctx, $perl_callback_function, $callback_data);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $perl_callback_function - reference to perl function
# $callback_data - [optional] data to passed to callback function when invoked
#
# returns: 0 on success, 1 on failure

# where callback function looks like
sub npn_advertised_cb_invoke {
  my ($ssl, $arrayref_proto_list_advertised_by_server, $callback_data) = @_;
  my $status;
  # ...
  $status = 1;   #status can be:
                 # 0 - OPENSSL_NPN_UNSUPPORTED
                 # 1 - OPENSSL_NPN_NEGOTIATED
                 # 2 - OPENSSL_NPN_NO_OVERLAP
  return $status, ['http1.1','spdy/2']; # the callback has to return 2 values
}

To undefine/clear this callback use:

Net::SSleay::CTX_set_next_proto_select_cb($ctx, undef);

CTX_set_next_protos_advertised_cb

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-1.0.1

NOTE: You need CTX_set_next_proto_select_cb on server side of SSL connection.

Simple usage:

$rv = Net::SSleay::CTX_set_next_protos_advertised_cb($ctx, $arrayref);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $arrayref - list of advertised protocols - e.g. ['http1.0', 'http1.1']
#
# returns: 0 on success, 1 on failure

Advanced usage (you probably do not need this):

$rv = Net::SSleay::CTX_set_next_protos_advertised_cb($ctx, $perl_callback_function, $callback_data);
# $ctx - value corresponding to openssl's SSL_CTX structure
# $perl_callback_function - reference to perl function
# $callback_data - [optional] data to passed to callback function when invoked
#
# returns: 0 on success, 1 on failure

# where callback function looks like
sub npn_advertised_cb_invoke {
  my ($ssl, $callback_data) = @_;
  # ...
  return ['http1.1','spdy/2']; # the callback has to return arrayref
}

To undefine/clear this callback use:

Net::SSleay::CTX_set_next_protos_advertised_cb($ctx, undef);

P_next_proto_negotiated

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-1.0.1

Returns the name of negotiated protocol for given SSL connection $ssl.

$rv = Net::SSLeay::P_next_proto_negotiated($ssl)
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (string) negotiated protocol name (or undef if no negotiation was done or failed with fatal error)

P_next_proto_last_status

COMPATIBILITY: not available in Net-SSLeay-1.45 and before; requires at least openssl-1.0.1

Returns the result of the last negotiation for given SSL connection $ssl.

$rv = Net::SSLeay::P_next_proto_last_status($ssl)
# $ssl - value corresponding to openssl's SSL structure
#
# returns: (integer) negotiation status
#          0 - OPENSSL_NPN_UNSUPPORTED
#          1 - OPENSSL_NPN_NEGOTIATED
#          2 - OPENSSL_NPN_NO_OVERLAP

Low level API: Other functions

COMP_add_compression_method

Adds the compression method cm with the identifier id to the list of available compression methods. This list is globally maintained for all SSL operations within this application. It cannot be set for specific SSL_CTX or SSL objects.

my $rv = Net::SSLeay::COMP_add_compression_method($id, $cm);
# $id - (integer) compression method id
#       0 to 63:    methods defined by the IETF
#       64 to 192:  external party methods assigned by IANA
#       193 to 255: reserved for private use
#
# $cm - value corresponding to openssl's COMP_METHOD structure
#
# returns: 0 on success, 1 on failure (check the error queue to find out the reason)

Check openssl doc http://www.openssl.org/docs/ssl/SSL_COMP_add_compression_method.html

DH_free

Frees the DH structure and its components. The values are erased before the memory is returned to the system.
```
Net::SSLeay::DH_free($dh);
# $dh - value corresponding to openssl's DH structure
#
# returns: no return value
```
Check openssl doc http://www.openssl.org/docs/crypto/DH_new.html

Constants

There are many openssl constants available in Net::SSLeay. You can use them like this:

use Net::SSLeay;
print &Net::SSLeay::NID_commonName;
#or
print Net::SSLeay::NID_commonName();

Or you can import them and use:

use Net::SSLeay qw/NID_commonName/;
print &NID_commonName;
#or
print NID_commonName();
#or
print NID_commonName;

The constants names are derived from openssl constants, however constants starting with SSL_ prefix have name with SSL_ part stripped - e.g. openssl's constant SSL_OP_ALL is available as Net::SSleay::OP_ALL

The list of all available constant names:

ASN1_STRFLGS_ESC_CTRL           NID_hmacWithSHA1                       OP_CRYPTOPRO_TLSEXT_BUG
ASN1_STRFLGS_ESC_MSB            NID_id_ad                              OP_DONT_INSERT_EMPTY_FRAGMENTS
ASN1_STRFLGS_ESC_QUOTE          NID_id_ce                              OP_EPHEMERAL_RSA
ASN1_STRFLGS_RFC2253            NID_id_kp                              OP_LEGACY_SERVER_CONNECT
CB_ACCEPT_EXIT                  NID_id_pbkdf2                          OP_MICROSOFT_BIG_SSLV3_BUFFER
CB_ACCEPT_LOOP                  NID_id_pe                              OP_MICROSOFT_SESS_ID_BUG
CB_CONNECT_EXIT                 NID_id_pkix                            OP_MSIE_SSLV2_RSA_PADDING
CB_CONNECT_LOOP                 NID_id_qt_cps                          OP_NETSCAPE_CA_DN_BUG
ERROR_NONE                      NID_id_qt_unotice                      OP_NETSCAPE_CHALLENGE_BUG
ERROR_SSL                       NID_idea_cbc                           OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG
ERROR_SYSCALL                   NID_idea_cfb64                         OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
ERROR_WANT_ACCEPT               NID_idea_ecb                           OP_NON_EXPORT_FIRST
ERROR_WANT_CONNECT              NID_idea_ofb64                         OP_NO_COMPRESSION
ERROR_WANT_READ                 NID_info_access                        OP_NO_QUERY_MTU
ERROR_WANT_WRITE                NID_initials                           OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
ERROR_WANT_X509_LOOKUP          NID_invalidity_date                    OP_NO_SSLv2
ERROR_ZERO_RETURN               NID_issuer_alt_name                    OP_NO_SSLv3
EVP_PKS_DSA                     NID_keyBag                             OP_NO_TICKET
EVP_PKS_EC                      NID_key_usage                          OP_NO_TLSv1
EVP_PKS_RSA                     NID_localKeyID                         OP_NO_TLSv1_1
EVP_PKT_ENC                     NID_localityName                       OP_NO_TLSv1_2
EVP_PKT_EXCH                    NID_md2                                OP_PKCS1_CHECK_1
EVP_PKT_EXP                     NID_md2WithRSAEncryption               OP_PKCS1_CHECK_2
EVP_PKT_SIGN                    NID_md5                                OP_SINGLE_DH_USE
EVP_PK_DH                       NID_md5WithRSA                         OP_SINGLE_ECDH_USE
EVP_PK_DSA                      NID_md5WithRSAEncryption               OP_SSLEAY_080_CLIENT_DH_BUG
EVP_PK_EC                       NID_md5_sha1                           OP_SSLREF2_REUSE_CERT_TYPE_BUG
EVP_PK_RSA                      NID_mdc2                               OP_TLS_BLOCK_PADDING_BUG
FILETYPE_ASN1                   NID_mdc2WithRSA                        OP_TLS_D5_BUG
FILETYPE_PEM                    NID_ms_code_com                        OP_TLS_ROLLBACK_BUG
F_CLIENT_CERTIFICATE            NID_ms_code_ind                        READING
F_CLIENT_HELLO                  NID_ms_ctl_sign                        RECEIVED_SHUTDOWN
F_CLIENT_MASTER_KEY             NID_ms_efs                             RSA_3
F_D2I_SSL_SESSION               NID_ms_ext_req                         RSA_F4
F_GET_CLIENT_FINISHED           NID_ms_sgc                             R_BAD_AUTHENTICATION_TYPE
F_GET_CLIENT_HELLO              NID_name                               R_BAD_CHECKSUM
F_GET_CLIENT_MASTER_KEY         NID_netscape                           R_BAD_MAC_DECODE
F_GET_SERVER_FINISHED           NID_netscape_base_url                  R_BAD_RESPONSE_ARGUMENT
F_GET_SERVER_HELLO              NID_netscape_ca_policy_url             R_BAD_SSL_FILETYPE
F_GET_SERVER_VERIFY             NID_netscape_ca_revocation_url         R_BAD_SSL_SESSION_ID_LENGTH
F_I2D_SSL_SESSION               NID_netscape_cert_extension            R_BAD_STATE
F_READ_N                        NID_netscape_cert_sequence             R_BAD_WRITE_RETRY
F_REQUEST_CERTIFICATE           NID_netscape_cert_type                 R_CHALLENGE_IS_DIFFERENT
F_SERVER_HELLO                  NID_netscape_comment                   R_CIPHER_TABLE_SRC_ERROR
F_SSL_CERT_NEW                  NID_netscape_data_type                 R_INVALID_CHALLENGE_LENGTH
F_SSL_GET_NEW_SESSION           NID_netscape_renewal_url               R_NO_CERTIFICATE_SET
F_SSL_NEW                       NID_netscape_revocation_url            R_NO_CERTIFICATE_SPECIFIED
F_SSL_READ                      NID_netscape_ssl_server_name           R_NO_CIPHER_LIST
F_SSL_RSA_PRIVATE_DECRYPT       NID_ns_sgc                             R_NO_CIPHER_MATCH
F_SSL_RSA_PUBLIC_ENCRYPT        NID_organizationName                   R_NO_PRIVATEKEY
F_SSL_SESSION_NEW               NID_organizationalUnitName             R_NO_PUBLICKEY
F_SSL_SESSION_PRINT_FP          NID_pbeWithMD2AndDES_CBC               R_NULL_SSL_CTX
F_SSL_SET_FD                    NID_pbeWithMD2AndRC2_CBC               R_PEER_DID_NOT_RETURN_A_CERTIFICATE
F_SSL_SET_RFD                   NID_pbeWithMD5AndCast5_CBC             R_PEER_ERROR
F_SSL_SET_WFD                   NID_pbeWithMD5AndDES_CBC               R_PEER_ERROR_CERTIFICATE
F_SSL_USE_CERTIFICATE           NID_pbeWithMD5AndRC2_CBC               R_PEER_ERROR_NO_CIPHER
F_SSL_USE_CERTIFICATE_ASN1      NID_pbeWithSHA1AndDES_CBC              R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE
F_SSL_USE_CERTIFICATE_FILE      NID_pbeWithSHA1AndRC2_CBC              R_PUBLIC_KEY_ENCRYPT_ERROR
F_SSL_USE_PRIVATEKEY            NID_pbe_WithSHA1And128BitRC2_CBC       R_PUBLIC_KEY_IS_NOT_RSA
F_SSL_USE_PRIVATEKEY_ASN1       NID_pbe_WithSHA1And128BitRC4           R_READ_WRONG_PACKET_TYPE
F_SSL_USE_PRIVATEKEY_FILE       NID_pbe_WithSHA1And2_Key_TripleDES_CBC R_SHORT_READ
F_SSL_USE_RSAPRIVATEKEY         NID_pbe_WithSHA1And3_Key_TripleDES_CBC R_SSL_SESSION_ID_IS_DIFFERENT
F_SSL_USE_RSAPRIVATEKEY_ASN1    NID_pbe_WithSHA1And40BitRC2_CBC        R_UNABLE_TO_EXTRACT_PUBLIC_KEY
F_SSL_USE_RSAPRIVATEKEY_FILE    NID_pbe_WithSHA1And40BitRC4            R_UNKNOWN_REMOTE_ERROR_TYPE
F_WRITE_PENDING                 NID_pbes2                              R_UNKNOWN_STATE
GEN_DIRNAME                     NID_pbmac1                             R_X509_LIB
GEN_DNS                         NID_pkcs                               SENT_SHUTDOWN
GEN_EDIPARTY                    NID_pkcs3                              SESSION_ASN1_VERSION
GEN_EMAIL                       NID_pkcs7                              ST_ACCEPT
GEN_IPADD                       NID_pkcs7_data                         ST_BEFORE
GEN_OTHERNAME                   NID_pkcs7_digest                       ST_CONNECT
GEN_RID                         NID_pkcs7_encrypted                    ST_INIT
GEN_URI                         NID_pkcs7_enveloped                    ST_OK
GEN_X400                        NID_pkcs7_signed                       ST_READ_BODY
MBSTRING_ASC                    NID_pkcs7_signedAndEnveloped           ST_READ_HEADER
MBSTRING_BMP                    NID_pkcs8ShroudedKeyBag                VERIFY_CLIENT_ONCE
MBSTRING_FLAG                   NID_pkcs9                              VERIFY_FAIL_IF_NO_PEER_CERT
MBSTRING_UNIV                   NID_pkcs9_challengePassword            VERIFY_NONE
MBSTRING_UTF8                   NID_pkcs9_contentType                  VERIFY_PEER
MIN_RSA_MODULUS_LENGTH_IN_BYTES NID_pkcs9_countersignature             WRITING
NID_OCSP_sign                   NID_pkcs9_emailAddress                 X509_LOOKUP
NID_SMIMECapabilities           NID_pkcs9_extCertAttributes            X509_PURPOSE_ANY
NID_X500                        NID_pkcs9_messageDigest                X509_PURPOSE_CRL_SIGN
NID_X509                        NID_pkcs9_signingTime                  X509_PURPOSE_NS_SSL_SERVER
NID_ad_OCSP                     NID_pkcs9_unstructuredAddress          X509_PURPOSE_OCSP_HELPER
NID_ad_ca_issuers               NID_pkcs9_unstructuredName             X509_PURPOSE_SMIME_ENCRYPT
NID_algorithm                   NID_private_key_usage_period           X509_PURPOSE_SMIME_SIGN
NID_authority_key_identifier    NID_rc2_40_cbc                         X509_PURPOSE_SSL_CLIENT
NID_basic_constraints           NID_rc2_64_cbc                         X509_PURPOSE_SSL_SERVER
NID_bf_cbc                      NID_rc2_cbc                            X509_PURPOSE_TIMESTAMP_SIGN
NID_bf_cfb64                    NID_rc2_cfb64                          X509_TRUST_COMPAT
NID_bf_ecb                      NID_rc2_ecb                            X509_TRUST_EMAIL
NID_bf_ofb64                    NID_rc2_ofb64                          X509_TRUST_OBJECT_SIGN
NID_cast5_cbc                   NID_rc4                                X509_TRUST_OCSP_REQUEST
NID_cast5_cfb64                 NID_rc4_40                             X509_TRUST_OCSP_SIGN
NID_cast5_ecb                   NID_rc5_cbc                            X509_TRUST_SSL_CLIENT
NID_cast5_ofb64                 NID_rc5_cfb64                          X509_TRUST_SSL_SERVER
NID_certBag                     NID_rc5_ecb                            X509_TRUST_TSA
NID_certificate_policies        NID_rc5_ofb64                          X509_V_FLAG_ALLOW_PROXY_CERTS
NID_client_auth                 NID_ripemd160                          X509_V_FLAG_CB_ISSUER_CHECK
NID_code_sign                   NID_ripemd160WithRSA                   X509_V_FLAG_CHECK_SS_SIGNATURE
NID_commonName                  NID_rle_compression                    X509_V_FLAG_CRL_CHECK
NID_countryName                 NID_rsa                                X509_V_FLAG_CRL_CHECK_ALL
NID_crlBag                      NID_rsaEncryption                      X509_V_FLAG_EXPLICIT_POLICY
NID_crl_distribution_points     NID_rsadsi                             X509_V_FLAG_EXTENDED_CRL_SUPPORT
NID_crl_number                  NID_safeContentsBag                    X509_V_FLAG_IGNORE_CRITICAL
NID_crl_reason                  NID_sdsiCertificate                    X509_V_FLAG_INHIBIT_ANY
NID_delta_crl                   NID_secretBag                          X509_V_FLAG_INHIBIT_MAP
NID_des_cbc                     NID_serialNumber                       X509_V_FLAG_NOTIFY_POLICY
NID_des_cfb64                   NID_server_auth                        X509_V_FLAG_POLICY_CHECK
NID_des_ecb                     NID_sha                                X509_V_FLAG_POLICY_MASK
NID_des_ede                     NID_sha1                               X509_V_FLAG_USE_CHECK_TIME
NID_des_ede3                    NID_sha1WithRSA                        X509_V_FLAG_USE_DELTAS
NID_des_ede3_cbc                NID_sha1WithRSAEncryption              X509_V_FLAG_X509_STRICT
NID_des_ede3_cfb64              NID_shaWithRSAEncryption               X509_V_OK
NID_des_ede3_ofb64              NID_stateOrProvinceName                XN_FLAG_COMPAT
NID_des_ede_cbc                 NID_subject_alt_name                   XN_FLAG_DN_REV
NID_des_ede_cfb64               NID_subject_key_identifier             XN_FLAG_DUMP_UNKNOWN_FIELDS
NID_des_ede_ofb64               NID_surname                            XN_FLAG_FN_ALIGN
NID_des_ofb64                   NID_sxnet                              XN_FLAG_FN_LN
NID_description                 NID_time_stamp                         XN_FLAG_FN_MASK
NID_desx_cbc                    NID_title                              XN_FLAG_FN_NONE
NID_dhKeyAgreement              NID_undef                              XN_FLAG_FN_OID
NID_dnQualifier                 NID_uniqueIdentifier                   XN_FLAG_FN_SN
NID_dsa                         NID_x509Certificate                    XN_FLAG_MULTILINE
NID_dsaWithSHA                  NID_x509Crl                            XN_FLAG_ONELINE
NID_dsaWithSHA1                 NID_zlib_compression                   XN_FLAG_RFC2253
NID_dsaWithSHA1_2               NOTHING                                XN_FLAG_SEP_COMMA_PLUS
NID_dsa_2                       OPENSSL_VERSION_NUMBER                 XN_FLAG_SEP_CPLUS_SPC
NID_email_protect               OP_ALL                                 XN_FLAG_SEP_MASK
NID_ext_key_usage               OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION   XN_FLAG_SEP_MULTILINE
NID_ext_req                     OP_CIPHER_SERVER_PREFERENCE            XN_FLAG_SEP_SPLUS_SPC
NID_friendlyName                OP_CISCO_ANYCONNECT                    XN_FLAG_SPC_EQ
NID_givenName                   OP_COOKIE_EXCHANGE

INTERNAL ONLY functions (do not use these)

The following functions are not intended for use from outside of Net::SSLeay module. They might be removed, renamed or changed without prior notice in future version.

Simply DO NOT USE THEM!

hello
blength
constant

EXAMPLES

One very good example to look at is the implementation of sslcat() in the SSLeay.pm file.

The following is a simple SSLeay client (with too little error checking :-(

#!/usr/local/bin/perl
use Socket;
use Net::SSLeay qw(die_now die_if_ssl_error) ;
Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

($dest_serv, $port, $msg) = @ARGV;      # Read command line
$port = getservbyname ($port, 'tcp') unless $port =~ /^\d+$/;
$dest_ip = gethostbyname ($dest_serv);
$dest_serv_params  = sockaddr_in($port, $dest_ip);

socket  (S, &AF_INET, &SOCK_STREAM, 0)  or die "socket: $!";
connect (S, $dest_serv_params)          or die "connect: $!";
select  (S); $| = 1; select (STDOUT);   # Eliminate STDIO buffering

# The network connection is now open, lets fire up SSL

$ctx = Net::SSLeay::CTX_new() or die_now("Failed to create SSL_CTX $!");
Net::SSLeay::CTX_set_options($ctx, &Net::SSLeay::OP_ALL)
     and die_if_ssl_error("ssl ctx set options");
$ssl = Net::SSLeay::new($ctx) or die_now("Failed to create SSL $!");
Net::SSLeay::set_fd($ssl, fileno(S));   # Must use fileno
$res = Net::SSLeay::connect($ssl) and die_if_ssl_error("ssl connect");
print "Cipher `" . Net::SSLeay::get_cipher($ssl) . "'\n";

# Exchange data

$res = Net::SSLeay::write($ssl, $msg);  # Perl knows how long $msg is
die_if_ssl_error("ssl write");
CORE::shutdown S, 1;  # Half close --> No more output, sends EOF to server
$got = Net::SSLeay::read($ssl);         # Perl returns undef on failure
die_if_ssl_error("ssl read");
print $got;

Net::SSLeay::free ($ssl);               # Tear down connection
Net::SSLeay::CTX_free ($ctx);
close S;

The following is a simple SSLeay echo server (non forking):

   #!/usr/local/bin/perl -w
   use Socket;
   use Net::SSLeay qw(die_now die_if_ssl_error);
   Net::SSLeay::load_error_strings();
   Net::SSLeay::SSLeay_add_ssl_algorithms();
   Net::SSLeay::randomize();

   $our_ip = "\0\0\0\0"; # Bind to all interfaces
   $port = 1235;
   $sockaddr_template = 'S n a4 x8';
   $our_serv_params = pack ($sockaddr_template, &AF_INET, $port, $our_ip);

   socket (S, &AF_INET, &SOCK_STREAM, 0)  or die "socket: $!";
   bind (S, $our_serv_params)             or die "bind:   $!";
   listen (S, 5)                          or die "listen: $!";
   $ctx = Net::SSLeay::CTX_new ()         or die_now("CTX_new ($ctx): $!");
   Net::SSLeay::CTX_set_options($ctx, &Net::SSLeay::OP_ALL)
        and die_if_ssl_error("ssl ctx set options");

   # Following will ask password unless private key is not encrypted
   Net::SSLeay::CTX_use_RSAPrivateKey_file ($ctx, 'plain-rsa.pem',
                                            &Net::SSLeay::FILETYPE_PEM);
   die_if_ssl_error("private key");
   Net::SSLeay::CTX_use_certificate_file ($ctx, 'plain-cert.pem',
				           &Net::SSLeay::FILETYPE_PEM);
   die_if_ssl_error("certificate");

   while (1) {
       print "Accepting connections...\n";
       ($addr = accept (NS, S))           or die "accept: $!";
       select (NS); $| = 1; select (STDOUT);  # Piping hot!

       ($af,$client_port,$client_ip) = unpack($sockaddr_template,$addr);
       @inetaddr = unpack('C4',$client_ip);
       print "$af connection from " .
       join ('.', @inetaddr) . ":$client_port\n";

       # We now have a network connection, lets fire up SSLeay...

       $ssl = Net::SSLeay::new($ctx)      or die_now("SSL_new ($ssl): $!");
       Net::SSLeay::set_fd($ssl, fileno(NS));

       $err = Net::SSLeay::accept($ssl) and die_if_ssl_error('ssl accept');
       print "Cipher `" . Net::SSLeay::get_cipher($ssl) . "'\n";

       # Connected. Exchange some data.

       $got = Net::SSLeay::read($ssl);     # Returns undef on fail
       die_if_ssl_error("ssl read");
       print "Got `$got' (" . length ($got) . " chars)\n";

       Net::SSLeay::write ($ssl, uc ($got)) or die "write: $!";
       die_if_ssl_error("ssl write");

       Net::SSLeay::free ($ssl);           # Tear down connection
       close NS;
   }

Yet another echo server. This one runs from /etc/inetd.conf so it avoids all the socket code overhead. Only caveat is opening an rsa key file - it had better be without any encryption or else it will not know where to ask for the password. Note how STDIN and STDOUT are wired to SSL.

#!/usr/local/bin/perl
# /etc/inetd.conf
#    ssltst stream tcp nowait root /path/to/server.pl server.pl
# /etc/services
#    ssltst		1234/tcp

use Net::SSLeay qw(die_now die_if_ssl_error);
Net::SSLeay::load_error_strings();
Net::SSLeay::SSLeay_add_ssl_algorithms();
Net::SSLeay::randomize();

chdir '/key/dir' or die "chdir: $!";
$| = 1;  # Piping hot!
open LOG, ">>/dev/console" or die "Can't open log file $!";
select LOG; print "server.pl started\n";

$ctx = Net::SSLeay::CTX_new()     or die_now "CTX_new ($ctx) ($!)";
$ssl = Net::SSLeay::new($ctx)     or die_now "new ($ssl) ($!)";
Net::SSLeay::set_options($ssl, &Net::SSLeay::OP_ALL)
     and die_if_ssl_error("ssl set options");

# We get already open network connection from inetd, now we just
# need to attach SSLeay to STDIN and STDOUT
Net::SSLeay::set_rfd($ssl, fileno(STDIN));
Net::SSLeay::set_wfd($ssl, fileno(STDOUT));

Net::SSLeay::use_RSAPrivateKey_file ($ssl, 'plain-rsa.pem',
                                     Net::SSLeay::FILETYPE_PEM);
die_if_ssl_error("private key");
Net::SSLeay::use_certificate_file ($ssl, 'plain-cert.pem',
                                   Net::SSLeay::FILETYPE_PEM);
die_if_ssl_error("certificate");

Net::SSLeay::accept($ssl) and die_if_ssl_err("ssl accept: $!");
print "Cipher `" . Net::SSLeay::get_cipher($ssl) . "'\n";

$got = Net::SSLeay::read($ssl);
die_if_ssl_error("ssl read");
print "Got `$got' (" . length ($got) . " chars)\n";

Net::SSLeay::write ($ssl, uc($got)) or die "write: $!";
die_if_ssl_error("ssl write");

Net::SSLeay::free ($ssl);         # Tear down the connection
Net::SSLeay::CTX_free ($ctx);
close LOG;

There are also a number of example/test programs in the examples directory:

sslecho.pl   -  A simple server, not unlike the one above
minicli.pl   -  Implements a client using low level SSLeay routines
sslcat.pl    -  Demonstrates using high level sslcat utility function
get_page.pl  -  Is a utility for getting html pages from secure servers
callback.pl  -  Demonstrates certificate verification and callback usage
stdio_bulk.pl       - Does SSL over Unix pipes
ssl-inetd-serv.pl   - SSL server that can be invoked from inetd.conf
httpd-proxy-snif.pl - Utility that allows you to see how a browser
                      sends https request to given server and what reply
                      it gets back (very educative :-)
makecert.pl  -  Creates a self signed cert (does not use this module)

LIMITATIONS

Net::SSLeay::read() uses an internal buffer of 32KB, thus no single read will return more. In practice one read returns much less, usually as much as fits in one network packet. To work around this, you should use a loop like this:

$reply = '';
while ($got = Net::SSLeay::read($ssl)) {
    last if print_errs('SSL_read');
    $reply .= $got;
}

Although there is no built-in limit in Net::SSLeay::write(), the network packet size limitation applies here as well, thus use:

$written = 0;

while ($written < length($message)) {
    $written += Net::SSLeay::write($ssl, substr($message, $written));
    last if print_errs('SSL_write');
}

Or alternatively you can just use the following convenience functions:

Net::SSLeay::ssl_write_all($ssl, $message) or die "ssl write failure";
$got = Net::SSLeay::ssl_read_all($ssl) or die "ssl read failure";

KNOWN BUGS AND CAVEATS

Autoloader emits a

Argument "xxx" isn't numeric in entersub at blib/lib/Net/SSLeay.pm'

warning if die_if_ssl_error is made autoloadable. If you figure out why, drop me a line.

Callback set using SSL_set_verify() does not appear to work. This may well be an openssl problem (e.g. see ssl/ssl_lib.c line 1029). Try using SSL_CTX_set_verify() instead and do not be surprised if even this stops working in future versions.

Callback and certificate verification stuff is generally too little tested.

Random numbers are not initialized randomly enough, especially if you do not have /dev/random and/or /dev/urandom (such as in Solaris platforms - but it's been suggested that cryptorand daemon from the SUNski package solves this). In this case you should investigate third party software that can emulate these devices, e.g. by way of a named pipe to some program.

Another gotcha with random number initialization is randomness depletion. This phenomenon, which has been extensively discussed in OpenSSL, Apache-SSL, and Apache-mod_ssl forums, can cause your script to block if you use /dev/random or to operate insecurely if you use /dev/urandom. What happens is that when too much randomness is drawn from the operating system's randomness pool then randomness can temporarily be unavailable. /dev/random solves this problem by waiting until enough randomness can be gathered - and this can take a long time since blocking reduces activity in the machine and less activity provides less random events: a vicious circle. /dev/urandom solves this dilemma more pragmatically by simply returning predictable "random" numbers. Some /dev/urandom emulation software however actually seems to implement /dev/random semantics. Caveat emptor.

I've been pointed to two such daemons by Mik Firestone <mik@@speed.stdio._com> who has used them on Solaris 8:

Entropy Gathering Daemon (EGD) at http://www.lothar.com/tech/crypto/
Pseudo-random number generating daemon (PRNGD) at http://www.aet.tu-cottbus.de/personen/jaenicke/postfix_tls/prngd.html

If you are using the low level API functions to communicate with other SSL implementations, you would do well to call

Net::SSLeay::CTX_set_options($ctx, &Net::SSLeay::OP_ALL)
     and die_if_ssl_error("ssl ctx set options");

to cope with some well know bugs in some other SSL implementations. The high level API functions always set all known compatibility options.

Sometimes sslcat() (and the high level HTTPS functions that build on it) is too fast in signaling the EOF to legacy HTTPS servers. This causes the server to return empty page. To work around this problem you can set the global variable

$Net::SSLeay::slowly = 1;   # Add sleep so broken servers can keep up

HTTP/1.1 is not supported. Specifically this module does not know to issue or serve multiple http requests per connection. This is a serious shortcoming, but using the SSL session cache on your server helps to alleviate the CPU load somewhat.

As of version 1.09 many newer OpenSSL auxiliary functions were added (from REM_AUTOMATICALLY_GENERATED_1_09 onwards in SSLeay.xs). Unfortunately I have not had any opportunity to test these. Some of them are trivial enough that I believe they "just work", but others have rather complex interfaces with function pointers and all. In these cases you should proceed wit great caution.

This module defaults to using OpenSSL automatic protocol negotiation code for automatically detecting the version of the SSL protocol that the other end talks. With most web servers this works just fine, but once in a while I get complaints from people that the module does not work with some web servers. Usually this can be solved by explicitly setting the protocol version, e.g.

$Net::SSLeay::ssl_version = 2;  # Insist on SSLv2
$Net::SSLeay::ssl_version = 3;  # Insist on SSLv3
$Net::SSLeay::ssl_version = 10; # Insist on TLSv1

Although the autonegotiation is nice to have, the SSL standards do not formally specify any such mechanism. Most of the world has accepted the SSLeay/OpenSSL way of doing it as the de facto standard. But for the few that think differently, you have to explicitly speak the correct version. This is not really a bug, but rather a deficiency in the standards. If a site refuses to respond or sends back some nonsensical error codes (at the SSL handshake level), try this option before mailing me.

On some systems, OpenSSL may be compiled without support for SSLv2. If this is the case, Net::SSLeay will warn if ssl_version has been set to 2.

The high level API returns the certificate of the peer, thus allowing one to check what certificate was supplied. However, you will only be able to check the certificate after the fact, i.e. you already sent your form data by the time you find out that you did not trust them, oops.

So, while being able to know the certificate after the fact is surely useful, the security minded would still choose to do the connection and certificate verification first and only then exchange data with the site. Currently none of the high level API functions do this, thus you would have to program it using the low level API. A good place to start is to see how the Net::SSLeay::http_cat() function is implemented.

The high level API functions use a global file handle SSLCAT_S internally. This really should not be a problem because there is no way to interleave the high level API functions, unless you use threads (but threads are not very well supported in perl anyway (as of version 5.6.1). However, you may run into problems if you call undocumented internal functions in an interleaved fashion. The best solution is to "require Net::SSLeay" in one thread after all the threads have been created.

DIAGNOSTICS

Random number generator not seeded!!!

(W) This warning indicates that randomize() was not able to read /dev/random or /dev/urandom, possibly because your system does not have them or they are differently named. You can still use SSL, but the encryption will not be as strong.

open_tcp_connection: destination host not found:`server' (port 123) ($!)

Name lookup for host named server failed.

open_tcp_connection: failed `server', 123 ($!)

The name was resolved, but establishing the TCP connection failed.

msg 123: 1 - error:140770F8:SSL routines:SSL23_GET_SERVER_HELLO:unknown proto

SSLeay error string. The first number (123) is the PID, the second number (1) indicates the position of the error message in SSLeay error stack. You often see a pile of these messages as errors cascade.

msg 123: 1 - error:02001002::lib(2) :func(1) :reason(2)

The same as above, but you didn't call load_error_strings() so SSLeay couldn't verbosely explain the error. You can still find out what it means with this command:

/usr/local/ssl/bin/ssleay errstr 02001002

Password is being asked for private key

This is normal behaviour if your private key is encrypted. Either you have to supply the password or you have to use an unencrypted private key. Scan OpenSSL.org for the FAQ that explains how to do this (or just study examples/makecert.pl which is used during make test to do just that).

BUGS AND SUPPORT

Please report any bugs or feature requests to bug-Net-SSLeay at rt.cpan.org, or through the web interface at http://rt.cpan.org/Public/Dist/Display.html?Name=Net-SSLeay. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.

Subversion access to the latest source code etc can be obtained at http://alioth.debian.org/projects/net-ssleay

The developer mailing list (for people interested in contributing to the source code) can be found at http://lists.alioth.debian.org/mailman/listinfo/net-ssleay-devel

You can find documentation for this module with the perldoc command.

perldoc Net::SSLeay

You can also look for information at:

AnnoCPAN: Annotated CPAN documentation

http://annocpan.org/dist/Net-SSLeay
CPAN Ratings

http://cpanratings.perl.org/d/Net-SSLeay
Search CPAN

http://search.cpan.org/dist/Net-SSLeay

Commercial support for Net::SSLeay may be obtained from

Symlabs (netssleay@symlabs.com)
Tel: +351-214.222.630
Fax: +351-214.222.637

AUTHOR

Maintained by Mike McCauley and Florian Ragwitz since November 2005

Originally written by Sampo Kellomäki <sampo@symlabs.com>

COPYRIGHT

Distribution and use of this module is under the same terms as the OpenSSL package itself (i.e. free, but mandatory attribution; NO WARRANTY). Please consult LICENSE file in the root of the OpenSSL distribution.

While the source distribution of this perl module does not contain Eric's or OpenSSL's code, if you use this module you will use OpenSSL library. Please give Eric and OpenSSL team credit (as required by their licenses).

And remember, you, and nobody else but you, are responsible for auditing this module and OpenSSL library for security problems, backdoors, and general suitability for your application.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

High level functions for accessing web servers

Basic set of functions

Alternate versions of high-level API

Using client certificates

Working through a web proxy

HTTP (without S) API

Certificate verification and Certificate Revocation Lists (CRLs)

Using Net::SSLeay in multi-threaded applications

Initialization

Using callbacks

Using openssl elements

Using other perl modules based on Net::SSLeay

Combining Net::SSLeay with other modules linked with openssl

Threading with get_https and friends

Convenience routines

Initialization

Error handling functions

Sockets

Callbacks

Low level API

Low level API: Version related functions

Low level API: Initialization related functions

Low level API: ERR_* and SSL_alert_* related functions

Low level API: SSL_METHOD_* related functions

Low level API: ENGINE_* related functions

Low level API: EVP_PKEY_* related functions

Low level API: PEM_* related functions

Low level API: d2i_* (DER format) related functions

Low level API: PKCS12 related functions

Low level API: SESSION_* related functions

Low level API: SSL_CTX_* related functions

Low level API: SSL_* related functions

Low level API: RAND_* related functions

Low level API: OBJ_* related functions

Low level API: ASN1_INTEGER_* related functions

Low level API: ASN1_STRING_* related functions

Low level API: ASN1_TIME_* related functions

Low level API: X509_* related functions

Low level API: X509_REQ_* related functions

Low level API: X509_CRL_* related functions

Low level API: X509_EXTENSION_* related functions

Low level API: X509_NAME_* related functions

Low level API: X509_STORE_* related functions

Low level API: X509_VERIFY_PARAM_* related functions

Low level API: Cipher (EVP_CIPHER_*) related functions

Low level API: Digest (EVP_MD_*) related functions

Low level API: CIPHER_* related functions

Low level API: RSA_* related functions

Low level API: BIO_* related functions

Low level API: NPN (next protocol negotiation) related functions

Low level API: Other functions

Constants

INTERNAL ONLY functions (do not use these)

EXAMPLES

LIMITATIONS

KNOWN BUGS AND CAVEATS

DIAGNOSTICS

BUGS AND SUPPORT

AUTHOR

COPYRIGHT

SEE ALSO

Module Install Instructions