NAME
Lab::Instrument::Yokogawa7651 - Yokogawa 7651 DC source
SYNOPSIS
use Lab::Instrument::Yokogawa7651;
my $gate14=new Lab::Instrument::Yokogawa7651(
connection_type => 'LinuxGPIB',
gpib_address => 22,
gate_protecet => 1,
level => 0.5,
);
$gate14->set_voltage(0.745);
print $gate14->get_voltage();DESCRIPTION
The Lab::Instrument::Yokogawa7651 class implements an interface to the discontinued voltage and current source 7651 by Yokogawa. This class derives from Lab::Instrument::Source and provides all functionality described there.
CONSTRUCTORS
new( %configuration_HASH )
HASH is a list of tuples given in the format
key => value,
please supply at least the configuration for the connection: connection_type => "LinxGPIB" gpib_address =>
you might also want to have gate protect from the start (the default values are given):
gate_protect => 1,
gp_equal_level => 1e-5,
gp_max_units_per_second => 0.05,
gp_max_units_per_step => 0.005,
gp_max_step_per_second => 10,
gp_max_units_per_second => 0.05,
gp_max_units_per_step => 0.005,
max_sweep_time=>3600,
min_sweep_time=>0.1,If you want to use the sweep function without using gate protect, you should specify
stepsize=>0.01Additinally there is support to set parameters for the device "on init": If those values are not specified, defaults are supplied by the driver.
function => Voltage, # specify "Voltage" or "Current" mode, string is case insensitive
range => undef,
level => undef,
output => undef,If those values are not specified, the current device configuration is left unaltered.
METHODS
set_voltage($voltage)
Sets the output voltage to $voltage. Returns the newly set voltage.
get_voltage()
Returns the currently set $voltage. The value is read from the driver cache by default. Provide the option
device_cache => 1
to read directly from the device.
set_current($current)
Sets the output current to $current. Returns the newly set current.
get_current()
Returns the currently set $current. The value is read from the driver cache by default. Provide the option
device_cache => 1
to read directly from the device.
set_range($range)
Set the output range for the device. $range should be either in decimal or scientific notation. Returns the newly set range.
get_info()
Returns the information provided by the instrument's 'OS' command, in the form of an array with one entry per line. For display, use join(',',$yoko->get_info()); or similar.
set_output( $onoff )
Sets the output switch to "1" (on) or "0" (off). Returns the new output state;
get_output()
Returns the status of the output switch (0 or 1).
initialize()
set_voltage_limit($limit)
set_current_limit($limit)
get_status()
Returns a hash with the following keys:
CAL_switch
memory_card
calibration_mode
output
unstable
error
execution
settingThe value for each key is either 0 or 1, indicating the status of the instrument.
INSTRUMENT SPECIFICATIONS
DC voltage
The stability (24h) is the value at 23 +- 1°C. The stability (90days), accuracy (90days) and accuracy (1year) are values at 23 +- 5°C. The temperature coefficient is the value at 5 to 18°C and 28 to 40°C.
Range Maximum Resolution Stability 24h Stability 90d
Output +-(% of setting +-(% of setting
+ µV) + µV)
-------------------------------------------------------------
10mV +-12.0000mV 100nV 0.002 + 3 0.014 + 4
100mV +-120.000mV 1µV 0.003 + 3 0.014 + 5
1V +-1.20000V 10µV 0.001 + 10 0.008 + 50
10V +-12.0000V 100µV 0.001 + 20 0.008 + 100
30V +-32.000V 1mV 0.001 + 50 0.008 + 200
Range Accuracy 90d Accuracy 1yr Temperature
+-(% of setting +-(% of setting Coefficient
+µV) +µV) +-(% of setting
+µV)/°C
-----------------------------------------------------
10mV 0.018 + 4 0.025 + 5 0.0018 + 0.7
100mV 0.018 + 10 0.025 + 10 0.0018 + 0.7
1V 0.01 + 100 0.016 + 120 0.0009 + 7
10V 0.01 + 200 0.016 + 240 0.0008 + 10
30V 0.01 + 500 0.016 + 600 0.0008 + 30
Range Maximum Output Output Noise
Output Resistance DC to 10Hz DC to 10kHz
(typical data)
----------------------------------------------------------
10mV - approx. 2Ohm 3µVp-p 30µVp-p
100mV - approx. 2Ohm 5µVp-p 30µVp-p
1V +-120mA less than 2mOhm 15µVp-p 60µVp-p
10V +-120mA less than 2mOhm 50µVp-p 100µVp-p
30V +-120mA less than 2mOhm 150µVp-p 200µVp-pCommon mode rejection: 120dB or more (DC, 50/60Hz). (However, it is 100dB or more in the 30V range.)
DC current
Range Maximum Resolution Stability (24 h) Stability (90 days)
Output +-(% of setting +-(% of setting
+ µA) + µA)
-----------------------------------------------------------------------
1mA +-1.20000mA 10nA 0.0015 + 0.03 0.016 + 0.1
10mA +-12.0000mA 100nA 0.0015 + 0.3 0.016 + 0.5
100mA +-120.000mA 1µA 0.004 + 3 0.016 + 5
Range Accuracy (90 days) Accuracy (1 year) Temperature
+-(% of setting +-(% of setting Coefficient
+ µA) + µA) +-(% of setting
+ µA)/°C
----- ------------------------------------------------------
1mA 0.02 + 0.1 0.03 + 0.1 0.0015 + 0.01
10mA 0.02 + 0.5 0.03 + 0.5 0.0015 + 0.1
100mA 0.02 + 5 0.03 + 5 0.002 + 1
Range Maximum Output Output Noise
Output Resistance DC to 10Hz DC to 10kHz
(typical data)
-----------------------------------------------------------------
1mA +-30 V more than 100MOhm 0.02µAp-p 0.1µAp-p
10mA +-30 V more than 100MOhm 0.2µAp-p 0.3µAp-p
100mA +-30 V more than 10MOhm 2µAp-p 3µAp-pCommon mode rejection: 100nA/V or more (DC, 50/60Hz).
CAVEATS
probably many
SEE ALSO
Lab::Instrument
The Yokogawa7651 class is a Lab::Instrument (Lab::Instrument).
Lab::Instrument::Source
The Yokogawa7651 class is a Source (Lab::Instrument::Source)
AUTHOR/COPYRIGHT
(c) 2004-2006 Daniel Schröer
(c) 2007-2010 Daniel Schröer, Daniela Taubert, Andreas K. Hüttel, and others
(c) 2011 Florian Olbrich, Andreas K. HüttelThis library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.