NAME

Fcntl - various flag constants and helper functions from C's fcntl.h

SYNOPSIS

use Fcntl;
use Fcntl qw(:DEFAULT :flock);
use Fcntl qw(F_GETFD F_SETFD FD_CLOEXEC);

DESCRIPTION

This module provides flags and helper functions for use with "chmod" in perlfunc (S_*), "fcntl" in perlfunc (F_*), "flock" in perlfunc (LOCK_*), "seek" in perlfunc (SEEK_*), "stat" in perlfunc (S_*), "sysopen" in perlfunc (O_*), and "sysseek" in perlfunc (SEEK_*). They correspond to the C macros defined in fcntl.h.

Not all symbols are available on all systems. Except where noted otherwise, the constants and functions provided by this module will throw a runtime exception if the corresponding C macro is not available. Consult your system documentation to see the full description of each symbol and whether it is available on your platform: chmod(2), fcntl(2), flock(2), lseek(2), open(2), stat(2).

(In particular, some of the F_* symbols are highly non-portable because they only exist on a single platform or require system-specific C data structures to be passed as the third argument to fcntl, which can't be portably constructed in pure Perl.)

EXPORTED SYMBOLS

Default exports and export tags

The full list of default exports can be found below in "APPENDIX A".

In addition, the following export tags are available (see Exporter for more information on export tags):

:DEFAULT: Equivalent to the list of default export symbols (see "APPENDIX A").
:flock: Equivalent to all LOCK_* symbols listed below.
:mode: Equivalent to all S_* symbols listed below.
:seek: Equivalent to all SEEK_* symbols listed below.
:Fcompat: Equivalent to qw(FAPPEND FASYNC FCREAT FDEFER FDSYNC FEXCL FLARGEFILE FNDELAY FNONBLOCK FRSYNC FSYNC FTRUNC). These only exist for compatibility with old code (if your platform defines them at all) and should not be used in new code.

Symbols for use with `fcntl`

F_ALLOCSP

File storage manipulation.

F_ALLOCSP64

File storage manipulation.

F_DUP2FD

Duplicate a file descriptor to the number specified in the third argument to fcntl (if it refers to an open file, it is automatically closed first).

F_DUPFD

Duplicate a file descriptor to the lowest unused number greater than or equal to the third argument of fcntl.

F_FREESP

File storage manipulation.

F_FREESP64

File storage manipulation.

F_FSYNC

Synchronize file data to disk.

F_FSYNC64

Synchronize file data to disk.

F_GETFD

Return (as a number) the set of file descriptor flags, in which the following bits may be set:

FD_CLOEXEC: During a successful exec call, the file descriptor will be closed automatically.

F_GETFL

Return (as a number) the set of file description status flags (O_*) as set by open and fcntl. To determine the file access mode, perform a bitwise AND with "O_ACCMODE" and see whether the result is equal to O_RDONLY, O_WRONLY, or O_RDWR.

F_GETLEASE

Indicate the type of lease associated with the filehandle (if any) by returning one of the following flags:

F_RDLCK: A read lease.
F_WRLCK: A write lease.
F_UNLCK: No lease.

F_GETLK

Test for the existence of record locks on the file.

F_GETLK64

Test for the existence of record locks on the file.

F_GETOWN

Return the ID of the process (as a positive number) or group (as a negative number) that is currently receiving signals for events on the file descriptor.

F_GETPIPE_SZ

Return the capacity of the pipe associated with the filehandle.

F_GETSIG

Return the number of the signal sent when input or output becomes possible on the filehandle. A return value of 0 means SIGIO.

F_NOTIFY

File and directory change notification with signals.

DN_ACCESS
DN_ATTRIB
DN_CREATE
DN_DELETE
DN_MODIFY
DN_MULTISHOT
DN_RENAME

F_SETFD

Set the file descriptor flags. See "F_GETFD" for the list of available flags.

F_SETFL

Set the file description status flags (O_*). Only some flags can be changed this way.

F_SETLEASE

Set a file lease as specified by the third fnctl argument, which must be one of the following:

F_RDLCK: Set a read lease.
F_WRLCK: Set a write lease.
F_UNLCK: Remove a lease.

F_SETLK

Acquire a record lock.

F_SETLK64

Acquire a record lock.

F_SETLKW

Acquire a record lock and wait for conflicting locks to be released.

F_SETLKW64

Acquire a record lock and wait for conflicting locks to be released.

F_SETOWN

Set the ID of the process (as a positive number) or group (as a negative number) that will receive signals for events on the file descriptor.

F_SETPIPE_SZ

Set the capacity of the pipe associated with the filehandle. Return the actual capacity reserved for the pipe, which may be higher than requested.

F_SETSIG

Set the number of the signal sent when input or output becomes possible on the filehandle. An argument of 0 means SIGIO.

F_SHARE

Set share reservation.

F_UNSHARE

Remove share reservation.

F_COMPAT

F_EXLCK

F_NODNY

F_POSIX

F_RDACC

F_RDDNY

F_RWACC

F_RWDNY

F_SHLCK

F_WRACC

F_WRDNY

Symbols for use with `flock`

LOCK_EX: Request an exclusive lock.
LOCK_MAND: Request a mandatory lock.
LOCK_NB: Make lock request non-blocking (can be combined with other LOCK_* flags using bitwise OR).
LOCK_READ: With LOCK_MAND: Allow concurrent reads.
LOCK_RW: With LOCK_MAND: Allow concurrent reads and writes.
LOCK_SH: Request a shared lock.
LOCK_UN: Release a held lock.
LOCK_WRITE: With LOCK_MAND: Allow concurrent writes.

Symbols for use with `sysopen`

O_ACCMODE: Bit mask for extracting the file access mode (read-only, write-only, or read/write) from the other flags. This is mainly useful in combination with "F_GETFL".
O_ALIAS: (Mac OS) Open alias file (instead of the file that the alias refers to).
O_ALT_IO: (NetBSD) Use alternative I/O semantics.
O_APPEND: Open the file in append mode. Writes always go to the end of the file.
O_ASYNC: Enable signal-based I/O. When the file becomes readable or writable, a signal is sent.
O_BINARY: (Windows) Open the file in binary mode.
O_CREAT: If the file to be opened does not exist yet, create it.
O_DEFER: (AIX) Changes to the file are kept in memory and not written to disk until the program performs an explicit $fh->sync().
O_DIRECT: Perform direct I/O to/from user-space buffers; avoid caching at the OS level.
O_DIRECTORY: Fail if the filename to be opened does not refer to a directory.
O_DSYNC: Synchronize file data immediately, like calling fdatasync(2) after each write.
O_EVTONLY: (Mac OS) Open the file for event notifications, not reading or writing.
O_EXCL: If the file already exists, fail and set $! to EEXIST (this only makes sense in combination with O_CREAT).
O_EXLOCK: When the file is opened, atomically obtain an exclusive lock.
O_IGNORE_CTTY: (Hurd) If the file to be opened is the controlling terminal for this process, don't recognize it as such. Operations on this filehandle won't trigger job control signals.
O_LARGEFILE: On 32-bit platforms, allow opening files whose size exceeds 2 GiB (2,147,483,647 bytes).
O_NDELAY: Compatibility symbol. Use O_NONBLOCK instead.
O_NOATIME: Don't update the access time of the file when reading from it.
O_NOCTTY: If the process does not have a controlling terminal and the file to be opened is a terminal device, don't make it the controlling terminal of the process.
O_NOFOLLOW: If the final component of the filename is a symbolic link, fail and set $! to ELOOP.
O_NOINHERIT: (Windows) Don't let child processes inherit the opened file descriptor.
O_NOLINK: (Hurd) If the file to be opened is a symbolic link, don't follow it; open the link itself.
O_NONBLOCK: Open the file in non-blocking mode. Neither the open itself nor any read/write operations on the filehandle will block. (This is mainly useful for pipes and sockets. It has no effect on regular files.)
O_NOSIGPIPE: If the file to be opened is a pipe, then don't raise SIGPIPE for write operations when the read end of the pipe is closed; make the write fail with EPIPE instead.
O_NOTRANS: (Hurd) If the file to be opened is specially translated, don't invoke the translator; open the bare file itself.
O_RANDOM: (Windows) Indicate that the program intends to access the file contents randomly (without a predictable pattern). This is an optimization hint for the file cache (but may cause excessive memory use on large files).
O_RAW: (Windows) Same as O_BINARY.
O_RDONLY: Open the file for reading (only).
O_RDWR: Open the file for reading and writing.
O_RSRC: (Mac OS) Open the resource fork of the file.
O_RSYNC: Extend the effects of O_SYNC and O_DSYNC to read operations. In particular, reading from a filehandle opened with O_SYNC | O_RSYNC will wait until the access time of the file has been modified on disk.
O_SEQUENTIAL: (Windows) Indicate that the program intends to access the file contents sequentially. This is an optimization hint for the file cache.
O_SHLOCK: When the file is opened, atomically obtain a shared lock.
O_SYMLINK: If the file to be opened is a symbolic link, don't follow it; open the link itself.
O_SYNC: Synchronize file data and metadata immediately, like calling fsync(2) after each write.
O_TEMPORARY: (Windows) Delete the file when its last open file descriptor is closed.
O_TEXT: (Windows) Open the file in text mode.
O_TMPFILE: Create an unnamed temporary file. The filename argument specifies the directory the unnamed file should be placed in.
O_TRUNC: If the file already exists, truncate its contents to length 0.
O_TTY_INIT: If the file to be opened is a terminal that is not already open in any process, initialize its termios parameters.
O_WRONLY: Open the file for writing (only).
FAPPEND: Compatibility symbol. Use O_APPEND instead.
FASYNC: Compatibility symbol. Use O_ASYNC instead.
FCREAT: Compatibility symbol. Use O_CREAT instead.
FDEFER: Compatibility symbol. Use O_DEFER instead.
FDSYNC: Compatibility symbol. Use O_DSYNC instead.
FEXCL: Compatibility symbol. Use O_EXCL instead.
FLARGEFILE: Compatibility symbol. Use O_LARGEFILE instead.
FNDELAY: Compatibility symbol. Use O_NDELAY instead.
FNONBLOCK: Compatibility symbol. Use O_NONBLOCK instead.
FRSYNC: Compatibility symbol. Use O_RSYNC instead.
FSYNC: Compatibility symbol. Use O_SYNC instead.
FTRUNC: Compatibility symbol. Use O_TRUNC instead.

Symbols for use with `seek` and `sysseek`

SEEK_CUR: File offsets are relative to the current position in the file.
SEEK_END: File offsets are relative to the end of the file (i.e. mostly negative).
SEEK_SET: File offsets are absolute (i.e. relative to the beginning of the file).

Symbols for use with `stat` and `chmod`

S_ENFMT: Enforce mandatory file locks. (This symbol typically shares its value with S_ISGID.)
S_IEXEC: Compatibility symbol. Use S_IXUSR instead.
S_IFBLK: File type: Block device.
S_IFCHR: File type: Character device.
S_IFDIR: File type: Directory.
S_IFIFO: File type: Fifo/pipe.
S_IFLNK: File type: Symbolic link.
S_IFMT: Bit mask for extracting the file type bits. This symbol can also be used as a function: S_IFMT($mode) acts like $mode & S_IFMT. The result will be equal to one of the other S_IF* constants.
_S_IFMT: Bit mask for extracting the file type bits. This symbol is an actual constant and cannot be used as a function; otherwise it is identical to S_IFMT.
S_IFREG: File type: Regular file.
S_IFSOCK: File type: Socket.
S_IFWHT: File type: Whiteout file (used to mark the absence/deletion of a file in overlays).
S_IMODE: Function for extracting the permission bits from a file mode.
S_IREAD: Compatibility symbol. Use S_IRUSR instead.
S_IRGRP: Permissions: Readable by group.
S_IROTH: Permissions: Readable by others.
S_IRUSR: Permissions: Readable by owner.
S_IRWXG: Bit mask for extracting group permissions.
S_IRWXO: Bit mask for extracting other permissions.
S_IRWXU: Bit mask for extracting owner ("user") permissions.
S_ISBLK: Convenience function to check for block devices: S_ISBLK($mode) is equivalent to S_IFMT($mode) == S_IFBLK.
S_ISCHR: Convenience function to check for character devices: S_ISCHR($mode) is equivalent to S_IFMT($mode) == S_IFCHR.
S_ISDIR: Convenience function to check for directories: S_ISDIR($mode) is equivalent to S_IFMT($mode) == S_IFDIR.
S_ISFIFO: Convenience function to check for fifos: S_ISFIFO($mode) is equivalent to S_IFMT($mode) == S_IFIFO.
S_ISGID: Permissions: Set effective group ID from file (when running executables); mandatory locking (on non-group-executable files); new files inherit their group from the directory (on directories).
S_ISLNK: Convenience function to check for symbolic links: S_ISLNK($mode) is equivalent to S_IFMT($mode) == S_IFLNK.
S_ISREG: Convenience function to check for regular files: S_ISREG($mode) is equivalent to S_IFMT($mode) == S_IFREG.
S_ISSOCK: Convenience function to check for sockets: S_ISSOCK($mode) is equivalent to S_IFMT($mode) == S_IFSOCK.
S_ISTXT: Compatibility symbol. Use S_ISVTX instead.
S_ISUID: Permissions: Set effective user ID from file (when running executables).
S_ISVTX: Permissions: Files in this directory can only be deleted/renamed by their owner (or the directory's owner), even if other users have write permissions to the directory ("sticky bit").
S_ISWHT: Convenience function to check for whiteout files: S_ISWHT($mode) is equivalent to S_IFMT($mode) == S_IFWHT.
S_IWGRP: Permissions: Writable by group.
S_IWOTH: Permissions: Writable by others.
S_IWRITE: Compatibility symbol. Use S_IWUSR instead.
S_IWUSR: Permissions: Writable by owner.
S_IXGRP: Permissions: Executable/searchable by group.
S_IXOTH: Permissions: Executable/searchable by others.
S_IXUSR: Permissions: Executable/searchable by owner.

APPENDIX A

By default, if you say use Fcntl;, the following symbols are exported:

FD_CLOEXEC
F_ALLOCSP
F_ALLOCSP64
F_COMPAT
F_DUP2FD
F_DUPFD
F_EXLCK
F_FREESP
F_FREESP64
F_FSYNC
F_FSYNC64
F_GETFD
F_GETFL
F_GETLK
F_GETLK64
F_GETOWN
F_NODNY
F_POSIX
F_RDACC
F_RDDNY
F_RDLCK
F_RWACC
F_RWDNY
F_SETFD
F_SETFL
F_SETLK
F_SETLK64
F_SETLKW
F_SETLKW64
F_SETOWN
F_SHARE
F_SHLCK
F_UNLCK
F_UNSHARE
F_WRACC
F_WRDNY
F_WRLCK
O_ACCMODE
O_ALIAS
O_APPEND
O_ASYNC
O_BINARY
O_CREAT
O_DEFER
O_DIRECT
O_DIRECTORY
O_DSYNC
O_EXCL
O_EXLOCK
O_LARGEFILE
O_NDELAY
O_NOCTTY
O_NOFOLLOW
O_NOINHERIT
O_NONBLOCK
O_RANDOM
O_RAW
O_RDONLY
O_RDWR
O_RSRC
O_RSYNC
O_SEQUENTIAL
O_SHLOCK
O_SYNC
O_TEMPORARY
O_TEXT
O_TRUNC
O_WRONLY

To install less, copy and paste the appropriate command in to your terminal.

cpanm

cpanm less

CPAN shell

perl -MCPAN -e shell
install less

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

SYNOPSIS

DESCRIPTION

EXPORTED SYMBOLS

Default exports and export tags

Symbols for use with fcntl

Symbols for use with flock

Symbols for use with sysopen

Symbols for use with seek and sysseek

Symbols for use with stat and chmod

SEE ALSO

APPENDIX A

Module Install Instructions

Symbols for use with `fcntl`

Symbols for use with `flock`

Symbols for use with `sysopen`

Symbols for use with `seek` and `sysseek`

Symbols for use with `stat` and `chmod`