NAME
UMLS::Interface README
SYNOPSIS
This package provides a Perl interface to the Unified Medical Language
System (UMLS). The UMLS is a knowledge representation framework encoded
designed to support broad scope biomedical research queries. There
exists three major sources in the UMLS. The Metathesaurus which is a
taxonomy of medical concepts, the Semantic Network which categorizes
concepts in the Metathesaurus, and the SPECIALIST Lexicon which contains
a list of biomedical and general English terms used in the biomedical
domain. The UMLS-Interface package is set up to access the Metathesaurus
and the Semantic Network present in a MySQL database.
INSTALL
To install the module, run the following magic commands:
perl Makefile.PL
make
make test
make install
This will install the module in the standard location. You will, most
probably, require root privileges to install in standard system
directories. To install in a non-standard directory, specify a prefix
during the 'perl Makefile.PL' stage as:
perl Makefile.PL PREFIX=/home/programs
It is possible to modify other parameters during installation. The
details of these can be found in the ExtUtils::MakeMaker documentation.
However, it is highly recommended not messing around with other
parameters, unless you know what you're doing.
DATABASE SETUP
The interface assumes that the UMLS is present as a mysql database. The
names of these databases can be passed as configuration options at
initialization. However, if the names of the database is not provided at
initialization, then default values are used -- the database for the
UMLS is called 'umls'. The UMLS database must contain six tables: 1.
MRREL 2. MRCONSO 3. MRSAB 4. MRDOC 5. MRDEF 6. SRDEF 7. MRSTY
All other tables in the databases will be ignored, and any of these
tables missing would raise an error.
The mysql server can be on the same machine as the module or could be on
a remotely accessible machine. The location of the server can be
provided during initialization of the module.
INITIALIZING THE MODULE
To create an instance of the interface object, using default values for
all configuration options:
use UMLS::Interface;
my $interface = UMLS::Interface->new();
The following configuration options are also provided though:
'driver' -> Default value 'mysql'. This option specifies the
Perl DBD driver that should be used to access the
database. This implies that the some other DBMS
system (such as PostgresSQL) could also be used,
as long as there exist Perl DBD drivers to
access the database.
'umls' -> Default value 'umls'. This option specifies the name
of the UMLS database.
'hostname' -> Default value 'localhost'. The name or the IP
address of the machine on which the database
server is running.
'socket' -> Default value '/tmp/mysql.sock'. The socket on
which the database server is using.
'port' -> The port number on which the database server
accepts connections.
'username' -> Username to use to connect to the database server.
If not provided, the module attempts to connect as
an anonymous user.
'password' -> Password for access to the database server. If not
provided, the module attempts to access the server
without a password.
'forcerun' -> This parameter will bypass any command prompts such
as asking if you would like to continue with the index
creation.
'realtime' -> This parameter will not create a database of path
information (what we refer to as the index) but obtain
the path information about a concept on the fly
'cuilist' -> This parameter contains a file containing a list
of CUIs in which the path information should be
store for - if the CUI isn't on the list the path
information for that CUI will not be stored
'verbose' -> This parameter will print out the table information
to a config file in the UMLSINTERFACECONFIG directory
'config' -> This parameter contains the location of the config
file
These are passed through a hash. For example:
my %options = ();
$options{'config'} = $config;
$options{'realtime'} = 1;
my $interface = UMLS::Interface->new(\%options);
Keep in mind that the database configuration options can be included in
the MySQL my.cnf file. This is preferable. The directions for this are
in the INSTALL file. It is Stage 5 Step D.
These options can be reconfigured during run time using the reConfig()
method.
$options{'config'} = $newconfig;
$interface->reConfig(\%options);
USING THE MODULE
Once the object of module is successfully created after following the
steps described in the previous section, a number of methods can be
called upon this object. The output of methods varies:
@array refers to an array
$array refers to a reference to an array
$hash refers to a reference to a hash
The methods are as follows:
my $root = $interface->root();
Returns the concept ID of the root of the tree.
my $depth = $interface->depth();
Returns the depth of the tree.
my $version = $interface->version();
Return the version of UMLS.
my $bool = $interface->exists($cui);
Determines if a CUI exists
my $bool = $interface->validCui($cui);
Checks if CUI is a valid concept
my $array = $interface->getSab($cui);
Returns the list of sources the concept exists in
my $array = $interface->getConceptList($term);
Returns the list of all CUIs of a given term
from the SAB parameter specified in the config
file or the default
my $array = $interface->getDefConceptList($term);
Returns the list of all CUIs of a given term
from the SABDEF parameter specified in the
config file or the default
my $array = $interface->getAllConcepts($term);
Returns the list of all CUIs of a given term
in the entire UMLS.
my $hash = $interface->getCuiList();
Returns a list of CUIs from the source(s) specified
in the configuration file
my $array = $interface->getCuisFromSource($sab);
Returns an list of CUIs in a specified source
my $array = $interface->getCuisFromSource($sab);
Returns a list of CUIs from a specific source
my $array = $interface->getTermList($cui);
Returns the list of terms and their sources using
the SAB parameter in the configuration file or the
default
my $array = $interface->getDefTermList($cui);
Returns the list of terms and their sources using
the SABDEF parameter in the configuration file or
the default
my $array = $interface->getAllTerms($cui);
Returns the list of terms corresponding to a CUI
for all sources
my $hash = $interface->getCompounds();
Returns all the compound terms in the sources specified in
the configuration file.
my $term = $interface->getPreferredTerms($cui);
Returns the preferred term of a CUI if that term
exists in the sources specified by the SAB parameter
in the configuration file or the default
my $term = $interface->getAllPreferredTerms($cui);
Returns the preferred term of a CUI regardless
of the source information in the configuration
file
my $array = $interface->getParents($cui);
Returns the parent of a given CUI
my $array = $interface->getChildren($cui);
Returns the children of a given CUI
my $array = $interface->getRelated($cui, $rel);
Returns the CUI relations of a given CUI and relation
my $array = $interface->getRelationsBetweenCuis($cui1, $cui2);
Returns the relations between two CUIs.
my $array$interface->getRelations($cui);
Returns all of the relations associated with a CUI in
the sources specified in the configuration file
my $array = $interface->getCuiDef($cui);
Returns the definition(s) of a given CUI
my $array = $interface->getExtendedDefinition($cui);
Returns the extended definition of a given CUI
my $array = $interface->getSt($cui);
Returns the TUI(s) of the semantic type(s) associated
with a CUI
my $abr = $interface->getStAbr($tui);
Returns the abbreviation of a semantic type of a TUI
my $tui = $interface->getStTui($abr);
Returns the TUI of an abbreviation of a semantic type
my $string = $interface->getStString($abr);
Returns the name of the semantic type given its
my $def = $interface->getStDef($abr);
Returns the definition of a semantic type given its
abbreviation
my $array = $interface->getSemanticRelation($st1, $st2);
Returns a list of semantic relation between the two
semantic types.
my $array = $interface->getSemanticGroup($cui1);
Returns a list of semantic groups of a given CUI
my $array = $interface->getSemanticGroupOfSt($st);
Returns a list of semantic groups of a given semantic type
my $array = $interface->pathsToRoot($cui);
Returns a list of concept IDs that denote the path from
the input CUI to the root using the source and relation
information in the configuration file
my $array = $interface->findShortestPath($cui1, $cui2);
Returns the shortest path between two CUIs
my $array = $interface->findLeastCommonSubsumer($cui1, $cui2);
Returns the least common subsumer between two CUIs
my $min = $interface->findMinimumDepth($cui);
Returns the minimum depth of a CUI given the sources
and relations specified in the configuration file
my $max = $interface->findMaximumDepth($cui);
Returns the maximum depth of a CUI given the sources
and relations specified in the configuration file
my $int = $interface->findNumberOfCloserConcepts($cui1, $cui2);
Returns the number of concepts closer to cui1 than cui2
my $double = $interface->getIC($cui);
Returns the information content of a CUI
my $double = $interface->getProbability($cui);
Returns the probability of a concept
my $int = $interface->getFrequency($cui);
Returns the frequency of a CUI that was used to calculate
its information content and probability
my $N = $interface->getN();
Returns the total number of CUIs the probabilities were
calculated with
my $hash = $interface->getPropagationCuis();
Returns a list of CUIs that the counts were propagated over
my $hash = $interface->propagateCounts(\%hash);
Returns the propagation counts of the input CUIs
my $array = $interface->stPathsToRoot($tui);
Returns all the path to the root information of the given
semantic type (TUI)
my $array = $interface->stFindShortestPath($tui1, $tui2);
Returns the shortest paths between the two semantic types
(TUIs)
my $double = $interface->getStIC($tui);
Returns the information content of a given semantic type (TUI)
my $double = $interface->getStProbability($tui);
Returns the probability of a given semantic type (TUI)
my $stN = $interface->getStN();
Returns the total number of semantic types used to
obtain the probability of a semantic type
$interface->setPropagationParameters(\%parameters);
Sets the propagation parameters
$interface->setStSmoothing();
Sets the smoothing parameter to smooth the input counts
my $hash = $interface->propagateStCounts(\%hash);
Returns the propagation counts of the input semantic types
$interface->loadStPropagationHash(\%hash);
Load the propagation hash with probability counts
my $hash = $interface->returnTableNames();
Returns the mysql database table names in human and hex form
created by the package for a given configuration
$interface->dropConfigTable();
Drops the temporary table created by the UMLS-Interface
module of path information for a specified set of sources
$interface->removeConfigFiles();
Removes the configuration files created by the
verbose option
These methods essentially expose an interface as required by the
UMLS::Similarity modules. The UMLS::Similarity modules require that any
interface to a taxonomy provide the above methods.
CONFIGURATION
UMLS-Interface allows information to be extracted from the UMLS given a
specified set of sources and relations through the use of a
configuration file.
There are six configuration options: SAB, REL, RELA, SABDEF, RELDEF, and
RELADEF.
The SAB and REL options are used to determine which sources and
relations the path information is to be obtained from. The RELA option
narrows down the relation even further. The RELA will only be applied to
the PAR/CHD and RB/RN relations.
The SABDEF and RELDEF options are used to determine which sources and
relations to use when creating the EXTENDED DEFINITION. The RELA option
narrows down the relation even further. The RELADEF will only be applied
to the PAR/CHD and RB/RN relations.
You can specify a single source, multiple sources or the entire UMLS
(using the UMLS_ALL option). Keep in mind that the greater the number of
sources the larger the search space so if you obtaining path information
about two concepts this will take longer. The names of the sources in
the configuration file are expected to be in the SAB (source
abbreviation) form. A listing of the sources and their SABs can be
found:
lease/source_vocabularies.html>
You can specify any relations that exist in the specified set of sources
that you defined. The directional (hierarchical) relations though are
PAR/CHD and RB/RN. The other relations (such as RO and SIB) are not
directional which means when obtaining path information when using these
relations may take much longer than obtaining path information using the
directional relations. A listing of the different relations can be found
here (scroll down to the REL table):
lease/abbreviations.html>
If you do plan on using a multiple sources or the entire UMLS, we would
advise you to use the --realtime option which is explained below, in the
Interface.pm documentation and the path programs in the utils/
directory. We also have a am UMLS_ALL option for this so you do not have
to specify each and every source and relation.
The format of the configuration file is as follows:
SAB :: <include|exclude> <source1, source2, ... sourceN>
REL :: <include|exclude> <relation1, relation2, ... relationN>
RELA :: <include|exclude> <rela1, rela2, ... relaN>
For example, if we wanted to use the MSH vocabulary with only the RB/RN
relations, the configuration file would be:
SAB :: include MSH
REL :: include RB, RN
or
SAB :: include MSH
REL :: exclude PAR, CHD
If we wanted to use the SNOMEDCT vocabulary with only the PAR/CHD
relations that are is-a relations, the configuration file would be:
SAB :: include SNOMEDCT
REL :: include PAR, CHD
RELA :: include isa, inverse_isa
The format for SABDEF and RELDEF is similar.
The SABDEF and RELDEF options are used to determine the sources and
relations the extended definition is to be obtained from.
The format of the configuration file is as follows:
SABDEF :: <include|exclude> <source1, source2, ... sourceN>
RELDEF :: <include|exclude> <relation1, relation2, ... relationN>
RELADEF :: <include|exclude> <rela1, rela2, ... relaN>
Note: RELDEF takes any of MRREL relations and two special 'relations':
1. CUI which refers to the CUIs definition
2. TERM which refers to the terms associated with the CUI
For example, if we wanted to use the definitions from MSH vocabulary and
we only wanted the definition of the CUI and the definitions of the CUIs
SIB relation, the configuration file would be:
SABDEF :: include MSH
RELDEF :: include CUI, SIB
If you wanted only the PAR/CHD definitions which are is-a relations.
SABDEF :: include MSH
RELDEF :: include PAR, CHD
RELADEF :: include isa, inverse_isa
For all of these options, there is an UMLS_ALL tag. If used with SAB or
SABDEF, it would include all of the UMLS sources. If used with the REL
or RELDEF, it would include all of the possible relations (as well as
CUI and TERM for RELDEF). If used with the RELA or RELADEF, it would
include all of the RELA relations including those with no RELA relation.
Note that this is also the default for this option which is why it is
optional. An example of using the UMLS_ALL option is as follows:
SAB :: include UMLS_ALL
REL :: include UMLS_ALL
and another is:
SABDEF :: include UMLS_ALL
RELDEF :: include UMLS_ALL
If you go to the configuration file directory, there will be example
configuration files for the different runs that you have performed.
For more information about the configuration options please see the
README.
PROPAGATION
The Information Content (IC) is defined as the negative log of the
probability of a concept. The probability of a concept, c, is determine
by summing the probability of the concept occurring in some text plus
the probability its descendants occurring in some text.
The following is an example of the method UMLS-Interface uses to
propagation counts to determine the probability of a concept in the
sources/relations specified in the configuration file. In this method,
we percolate the counts up the hierarchy, and in the case of multiple
inheritance, we send a full count up all the paths to the parent.
The icfrequency file contains the frequency of the following concepts
existing in some corpus. For example, our corpus consists of three
concepts, A B & C, each occurring five times:
SAB :: <sources>
N:15
A<>5
B<>5
C<>5
In this case, our sources and relations consist of the following
'graph': Notation....A->D means A is a child of D....
A->D
B->D
B->E
D->F
C->E
E->F
So A B and C are "leaf" nodes and F is the root.
Step 1: determine the descendants of each nodes
Descendants(A) = {}
Descendants(B) = {}
Descendants(C) = {}
Descendants(D) = {A, B}
Descendants(E) = {B, C}
Descendants(F) = {A, B, C, D, E, F}
Step 2: determine the probability of a concept, P(c), occurring by
summing the probability of each of descendants plus its probability.
P(A) = freq(A) / N = .33
P(B) = freq(B) / N = .33
P(C) = freq(C) / N = .33
P(D) = (freq(A)+freq(B)+freq(D)) / N = .66
P(E) = (freq(B)+freq(C)+freq(E)) / N = .66
P(F) = (freq(A)+freq(B)+freq(C)+freq(D)+freq(E)+freq(F)) / N = .99
Step 3: print the probability of the concept occurring, P(c), for each
node in the sources/relations defined in the configuration table.
SMOOTH :: 0 <- or 1 if smoothing was used
SAB :: <sources>
REL :: <relations>
RELA :: <relas> <- if any are specified in the config
A<>.33
B<>.33
C<>.33
D<>.66
E<>.66
F<>.99
The information content for the nodes is then calculated by taking -log
of this probability.
We have an option that incorporates Laplace smoothing. Laplace smoothing
is where the frequency count of each of the concepts in the taxonomy is
incremented by one. The advantage of doing this is that it avoids having
a concept that has a probability of zero. The disadvantage is that it
can shift the overall probability mass of the concepts from what is
actually seen in the corpus.
REFERENCING
If you write a paper that has used UMLS-Interface in some way, we'd
certainly be grateful if you sent us a copy and referenced UMLS-Interface.
We have a published paper that provides a suitable reference:
@inproceedings{McInnesPP09,
title={{UMLS-Interface and UMLS-Similarity : Open Source
Software for Measuring Paths and Semantic Similarity}},
author={McInnes, B.T. and Pedersen, T. and Pakhomov, S.V.},
booktitle={Proceedings of the American Medical Informatics
Association (AMIA) Symposium},
year={2009},
month={November},
address={San Fransisco, CA}
}
This paper is also found in
or
CONTACT US
If you have any trouble installing and using UMLS-Interface, please
contact us via the users mailing list :
umls-similarity@yahoogroups.com
You can join this group by going to:
You may also contact us directly if you prefer :
Bridget T. McInnes: bthomson at cs.umn.edu
Ted Pedersen : tpederse at d.umn.edu
SOFTWARE COPYRIGHT AND LICENSE
Copyright (C) 2004-2010 Bridget T McInnes, Siddharth Patwardhan, Serguei
Pakhomov, Ying Liu and Ted Pedersen
This suite of programs is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as published
by the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
Note: The text of the GNU General Public License is provided in the file
'GPL.txt' that you should have received with this distribution.