/ 
perl5.004
River stage five • 12010 direct dependents • 33600 total dependents
/ File::Basename
Security Advisories (29)
CVE-2011-2728 (2012-12-21)

The bsd_glob function in the File::Glob module for Perl before 5.14.2 allows context-dependent attackers to cause a denial of service (crash) via a glob expression with the GLOB_ALTDIRFUNC flag, which triggers an uninitialized pointer dereference.

CVE-2020-12723 (2020-06-05)

regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls.

CVE-2020-10878 (2020-06-05)

Perl before 5.30.3 has an integer overflow related to mishandling of a "PL_regkind[OP(n)] == NOTHING" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection.

CVE-2020-10543 (2020-06-05)

Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow.

CVE-2018-6913 (2018-04-17)

Heap-based buffer overflow in the pack function in Perl before 5.26.2 allows context-dependent attackers to execute arbitrary code via a large item count.

CVE-2018-18314 (2018-12-07)

Perl before 5.26.3 has a buffer overflow via a crafted regular expression that triggers invalid write operations.

CVE-2018-18313 (2018-12-07)

Perl before 5.26.3 has a buffer over-read via a crafted regular expression that triggers disclosure of sensitive information from process memory.

CVE-2018-18312 (2018-12-05)

Perl before 5.26.3 and 5.28.0 before 5.28.1 has a buffer overflow via a crafted regular expression that triggers invalid write operations.

CVE-2018-18311 (2018-12-07)

Perl before 5.26.3 and 5.28.x before 5.28.1 has a buffer overflow via a crafted regular expression that triggers invalid write operations.

CVE-2015-8853 (2016-05-25)

The (1) S_reghop3, (2) S_reghop4, and (3) S_reghopmaybe3 functions in regexec.c in Perl before 5.24.0 allow context-dependent attackers to cause a denial of service (infinite loop) via crafted utf-8 data, as demonstrated by "a\x80."

CVE-2013-1667 (2013-03-14)

The rehash mechanism in Perl 5.8.2 through 5.16.x allows context-dependent attackers to cause a denial of service (memory consumption and crash) via a crafted hash key.

CVE-2010-4777 (2014-02-10)

The Perl_reg_numbered_buff_fetch function in Perl 5.10.0, 5.12.0, 5.14.0, and other versions, when running with debugging enabled, allows context-dependent attackers to cause a denial of service (assertion failure and application exit) via crafted input that is not properly handled when using certain regular expressions, as demonstrated by causing SpamAssassin and OCSInventory to crash.

CVE-2010-1158 (2010-04-20)

Integer overflow in the regular expression engine in Perl 5.8.x allows context-dependent attackers to cause a denial of service (stack consumption and application crash) by matching a crafted regular expression against a long string.

CVE-2009-3626 (2009-10-29)

Perl 5.10.1 allows context-dependent attackers to cause a denial of service (application crash) via a UTF-8 character with a large, invalid codepoint, which is not properly handled during a regular-expression match.

CVE-2008-1927 (2008-04-24)

Double free vulnerability in Perl 5.8.8 allows context-dependent attackers to cause a denial of service (memory corruption and crash) via a crafted regular expression containing UTF8 characters. NOTE: this issue might only be present on certain operating systems.

CVE-2005-3962 (2005-12-01)

Integer overflow in the format string functionality (Perl_sv_vcatpvfn) in Perl 5.9.2 and 5.8.6 Perl allows attackers to overwrite arbitrary memory and possibly execute arbitrary code via format string specifiers with large values, which causes an integer wrap and leads to a buffer overflow, as demonstrated using format string vulnerabilities in Perl applications.

CVE-2007-5116 (2007-11-07)

Buffer overflow in the polymorphic opcode support in the Regular Expression Engine (regcomp.c) in Perl 5.8 allows context-dependent attackers to execute arbitrary code by switching from byte to Unicode (UTF) characters in a regular expression.

CVE-2012-5195 (2012-12-18)

Heap-based buffer overflow in the Perl_repeatcpy function in util.c in Perl 5.12.x before 5.12.5, 5.14.x before 5.14.3, and 5.15.x before 15.15.5 allows context-dependent attackers to cause a denial of service (memory consumption and crash) or possibly execute arbitrary code via the 'x' string repeat operator.

CVE-2016-2381 (2016-04-08)

Perl might allow context-dependent attackers to bypass the taint protection mechanism in a child process via duplicate environment variables in envp.

CVE-2013-7422 (2015-08-16)

Integer underflow in regcomp.c in Perl before 5.20, as used in Apple OS X before 10.10.5 and other products, allows context-dependent attackers to execute arbitrary code or cause a denial of service (application crash) via a long digit string associated with an invalid backreference within a regular expression.

CVE-2011-1487 (2011-04-11)

The (1) lc, (2) lcfirst, (3) uc, and (4) ucfirst functions in Perl 5.10.x, 5.11.x, and 5.12.x through 5.12.3, and 5.13.x through 5.13.11, do not apply the taint attribute to the return value upon processing tainted input, which might allow context-dependent attackers to bypass the taint protection mechanism via a crafted string.

CVE-1999-1386 (1999-12-31)

Perl 5.004_04 and earlier follows symbolic links when running with the -e option, which allows local users to overwrite arbitrary files via a symlink attack on the /tmp/perl-eaXXXXX file.

CVE-2023-47039 (2023-10-30)

Perl for Windows relies on the system path environment variable to find the shell (cmd.exe). When running an executable which uses Windows Perl interpreter, Perl attempts to find and execute cmd.exe within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. An attacker with limited privileges can exploit this behavior by placing cmd.exe in locations with weak permissions, such as C:\ProgramData. By doing so, when an administrator attempts to use this executable from these compromised locations, arbitrary code can be executed.

CVE-2023-47100

In Perl before 5.38.2, S_parse_uniprop_string in regcomp.c can write to unallocated space because a property name associated with a \p{...} regular expression construct is mishandled. The earliest affected version is 5.30.0.

CVE-2024-56406 (2025-04-13)

A heap buffer overflow vulnerability was discovered in Perl. When there are non-ASCII bytes in the left-hand-side of the `tr` operator, `S_do_trans_invmap` can overflow the destination pointer `d`.    $ perl -e '$_ = "\x{FF}" x 1000000; tr/\xFF/\x{100}/;'    Segmentation fault (core dumped) It is believed that this vulnerability can enable Denial of Service and possibly Code Execution attacks on platforms that lack sufficient defenses.

CVE-1999-0462 (1999-03-17)

suidperl in Linux Perl does not check the nosuid mount option on file systems, allowing local users to gain root access by placing a setuid script in a mountable file system, e.g. a CD-ROM or floppy disk.

CVE-2000-0703 (2000-10-20)

suidperl (aka sperl) does not properly cleanse the escape sequence "~!" before calling /bin/mail to send an error report, which allows local users to gain privileges by setting the "interactive" environmental variable and calling suidperl with a filename that contains the escape sequence.

CVE-2016-1238 (2016-08-02)

(1) cpan/Archive-Tar/bin/ptar, (2) cpan/Archive-Tar/bin/ptardiff, (3) cpan/Archive-Tar/bin/ptargrep, (4) cpan/CPAN/scripts/cpan, (5) cpan/Digest-SHA/shasum, (6) cpan/Encode/bin/enc2xs, (7) cpan/Encode/bin/encguess, (8) cpan/Encode/bin/piconv, (9) cpan/Encode/bin/ucmlint, (10) cpan/Encode/bin/unidump, (11) cpan/ExtUtils-MakeMaker/bin/instmodsh, (12) cpan/IO-Compress/bin/zipdetails, (13) cpan/JSON-PP/bin/json_pp, (14) cpan/Test-Harness/bin/prove, (15) dist/ExtUtils-ParseXS/lib/ExtUtils/xsubpp, (16) dist/Module-CoreList/corelist, (17) ext/Pod-Html/bin/pod2html, (18) utils/c2ph.PL, (19) utils/h2ph.PL, (20) utils/h2xs.PL, (21) utils/libnetcfg.PL, (22) utils/perlbug.PL, (23) utils/perldoc.PL, (24) utils/perlivp.PL, and (25) utils/splain.PL in Perl 5.x before 5.22.3-RC2 and 5.24 before 5.24.1-RC2 do not properly remove . (period) characters from the end of the includes directory array, which might allow local users to gain privileges via a Trojan horse module under the current working directory.

CVE-2015-8608 (2017-02-07)

The VDir::MapPathA and VDir::MapPathW functions in Perl 5.22 allow remote attackers to cause a denial of service (out-of-bounds read) and possibly execute arbitrary code via a crafted (1) drive letter or (2) pInName argument.

NAME

fileparse - split a pathname into pieces

basename - extract just the filename from a path

dirname - extract just the directory from a path

SYNOPSIS

use File::Basename;

($name,$path,$suffix) = fileparse($fullname,@suffixlist)
fileparse_set_fstype($os_string);
$basename = basename($fullname,@suffixlist);
$dirname = dirname($fullname);

($name,$path,$suffix) = fileparse("lib/File/Basename.pm","\.pm");
fileparse_set_fstype("VMS");
$basename = basename("lib/File/Basename.pm",".pm");
$dirname = dirname("lib/File/Basename.pm");

DESCRIPTION

These routines allow you to parse file specifications into useful pieces using the syntax of different operating systems.

fileparse_set_fstype

You select the syntax via the routine fileparse_set_fstype().

If the argument passed to it contains one of the substrings "VMS", "MSDOS", "MacOS", "AmigaOS" or "MSWin32", the file specification syntax of that operating system is used in future calls to fileparse(), basename(), and dirname(). If it contains none of these substrings, UNIX syntax is used. This pattern matching is case-insensitive. If you've selected VMS syntax, and the file specification you pass to one of these routines contains a "/", they assume you are using UNIX emulation and apply the UNIX syntax rules instead, for that function call only.

If the argument passed to it contains one of the substrings "VMS", "MSDOS", "MacOS", "AmigaOS", "os2", "MSWin32" or "RISCOS", then the pattern matching for suffix removal is performed without regard for case, since those systems are not case-sensitive when opening existing files (though some of them preserve case on file creation).

If you haven't called fileparse_set_fstype(), the syntax is chosen by examining the builtin variable $^O according to these rules.

fileparse

The fileparse() routine divides a file specification into three parts: a leading path, a file name, and a suffix. The path contains everything up to and including the last directory separator in the input file specification. The remainder of the input file specification is then divided into name and suffix based on the optional patterns you specify in @suffixlist. Each element of this list is interpreted as a regular expression, and is matched against the end of name. If this succeeds, the matching portion of name is removed and prepended to suffix. By proper use of @suffixlist, you can remove file types or versions for examination.

You are guaranteed that if you concatenate path, name, and suffix together in that order, the result will denote the same file as the input file specification.

EXAMPLES

Using UNIX file syntax:

    ($base,$path,$type) = fileparse('/virgil/aeneid/draft.book7',
				    '\.book\d+');

would yield

$base eq 'draft'
$path eq '/virgil/aeneid/',
$type eq '.book7'

Similarly, using VMS syntax:

    ($name,$dir,$type) = fileparse('Doc_Root:[Help]Rhetoric.Rnh',
				   '\..*');

would yield

$name eq 'Rhetoric'
$dir  eq 'Doc_Root:[Help]'
$type eq '.Rnh'
basename

The basename() routine returns the first element of the list produced by calling fileparse() with the same arguments, except that it always quotes metacharacters in the given suffixes. It is provided for programmer compatibility with the UNIX shell command basename(1).

dirname

The dirname() routine returns the directory portion of the input file specification. When using VMS or MacOS syntax, this is identical to the second element of the list produced by calling fileparse() with the same input file specification. (Under VMS, if there is no directory information in the input file specification, then the current default device and directory are returned.) When using UNIX or MSDOS syntax, the return value conforms to the behavior of the UNIX shell command dirname(1). This is usually the same as the behavior of fileparse(), but differs in some cases. For example, for the input file specification lib/, fileparse() considers the directory name to be lib/, while dirname() considers the directory name to be .).