NAME

PDL::Doc - support for PDL online documentation

SYNOPSIS

use PDL::Doc;
$onlinedc = new PDL::Doc ($docfile);
@match = $onlinedc->search('m/slice|clump/');

DESCRIPTION

An implementation of online docs for PDL.

PDL documentation conventions

For a package like PDL that has a lot of functions it is very desirable to have some form of online help to make it easy for the user to remind himself of names, calling conventions and typical usage of the multitude of functions at his disposal. To make it straightforward to extract the relevant information from the POD documentation in source files that make up the PDL distribution certain conventions have been adopted in formatting this documentation.

The first convention says that all documentation for PDL functions appears in the POD section introduced by one of the following:

=head1 FUNCTIONS
=head1 OPERATORS
=head1 METHODS
=head1 CONSTRUCTORS

If you're documenting an object-oriented interface to a class that your module defines, you should use METHODS and CONSTRUCTORS as appropriate. If you are simply adding functions to PDL, use FUNCTIONS and OPERATORS as appropriate.

Individual functions or methods in these section are introduced by

=head2 funcname

where signature is the argumentlist for a PP defined function as explained in PDL::PP. Generally, PDL documentation is in valid POD format (see perlpod) but uses the =for directive in a special way. The =for directive is used to flag to the PDL Pod parser that information is following that will be used to generate online help.

The PDL podparser is derived from the PDL::Pod::Parser class that had to be patched in a few places, partly to fix minor bugs, partly to enhance functionality for perusal by PDL::Doc. Since the PDL::Doc module is still experimental the patched Pod-Parser distribution is included with the current PDL-Doc distribution. Note that PDL::Doc will not work correctly with the released Pod-Parser distribution.

The PDL Pod parser recognises the following =for directives:

Ref

indicates that the one line reference for this function follows, e.g.,

=for ref

Returns a piddle of lags to parent.

Sig

the signature for the current function follows, e.g.,

=for sig

   Signature: (a(n), [o]b(), [t]tmp(n))

Usage

an indication of the possible calling conventions for the current function, e.g.,

=for usage

   wpic($pdl,$filename[,{ options... }])

Opt

lists options for the current function, e.g.,

=for options

   CONVERTER  => 'ppmtogif',   # explicitly specify pbm converter
   FLAGS      => '-interlaced -transparent 0',  # flags for converter
   IFORM      => 'PGM',        # explicitly specify intermediate format
   XTRAFLAGS  => '-imagename iris', # additional flags to defaultflags
   FORMAT     => 'PCX',        # explicitly specify output image format
   COLOR      => 'bw',         # specify color conversion
   LUT        => $lut,         # use color table information

Example

gives examples of typical usage for the current function:

=for example

    wpic $pdl, $file;
    $im->wpic('web.gif',{LUT => $lut});
    for (@images) {
      $_->wpic($name[0],{CONVERTER => 'ppmtogif'})
    }

Bad

provides information on how the function handles bad values (if $PDL:Config{WITH_BADVAL} is set to 1). The intention is to have this information automatically created for pp-compiled functions, although it can be over-ridden.

The PDL podparser is implemented as a simple state machine. Any of the above =for statements switches the podparser into a state where the following paragraph is accepted as information for the respective field (Ref, Usage, Opt, Example or Bad). Only the text up to the end of the current paragraph is accepted, for example:

=for example

       ($x,$y) = $a->func(1,3);  # this is part of the accepted info
       $x = func($a,0,1);        # this as well

       $x = func($a,$b);         # but this isn't

To make the resulting pod documentation also easily digestible for the existing pod filters (pod2man, pod2text, pod2html, etc) the actual textblock of information must be separated from the =for directive by at least one blank line. Otherwise, the textblock will be lost in the translation process when the "normal" podformatters are used. The general idea behind this format is that it should be easy to extract the information for online documentation, automatic generation of a reference card, etc but at the same time the documentation should be translated by the standard podformatters without loss of contents (and without requiring any changes in the existing POD format).

The preceding explanations should be further explained by the following example (extracted from PDL/IO/Misc/misc.pd):

=head2 rcols()

=for ref

Read ASCII whitespaced cols from file into piddles efficiently.

If no columns are specified all are assumed
Will optionally only process lines matching a pattern.
Can take file name or *HANDLE.

=for usage

 Usage: ($x,$y,...) = rcols(*HANDLE|"filename", ["/pattern/",$col1, $col2,] ...)

e.g.,

=for example

  ($x,$y)    = rcols 'file1'
  ($x,$y,$z) = rcols 'file2', "/foo/",3,4
  $x = PDL->rcols 'file1';

Note: currently quotes are required on the pattern.

which is translated by, e.g, the standard pod2text converter into:

rcols()

  Read ASCII whitespaced cols from file into piddles efficiently.

  If no columns are specified all are assumed Will optionally only
  process lines matching a pattern. Can take file name or *HANDLE.

    Usage: ($x,$y,...) = rcols(*HANDLE|"filename", ["/pattern/",$col1, $col2,] ...)

  e.g.,

    ($x,$y)    = rcols 'file1'
    ($x,$y,$z) = rcols 'file2', "/foo/",3,4
    $x = PDL->rcols 'file1';

  Note: currently quotes are required on the pattern.

It should be clear from the preceding example that readable output can be obtained from this format using the standard converters and the reader will hopefully get a feeling how he can easily intersperse the special =for directives with the normal POD documentation.

Which directives should be contained in the documentation

The module documentation should start with the

=head1 NAME

PDL::Modulename -- do something with piddles

section (as anyway required by pod2man) since the PDL podparser extracts the name of the module this function belongs to from that section.

Each function that is not only for internal use by the module should be documented, introduced with the =head2 directive in the =head1 FUNCTIONS section. The only field that every function documented along these lines should have is the Ref field preceding a one line description of its intended functionality (suitable for inclusion in a concise reference card). PP defined functions (see PDL::PP) should have a Sig field stating their signature. To facilitate maintainance of this documentation for such functions the 'Doc' field has been introduced into the definition of pp_def (see again PDL::PP) which will take care that name and signature of the so defined function are documented in this way (for examples of this usage see, for example, the PDL::Slices module, especially slices.pd and the resulting Slices.pm). Similarly, the 'BadDoc' field provides a means of specifying information on how the routine handles the presence of bad values: this will be autpmatically created if BadDoc is not supplied, or set to undef.

Furthermore, the documentation for each function should contain at least one of the Usage or Examples fields. Depending on the calling conventions for the function under consideration presence of both fields may be warranted.

If a function has options that should be given as a hash reference in the form

{Option => Value, ...}

then the possible options (and aproppriate values) should be explained in the textblock following the =for Opt directive (see example above and, e.g., PDL::IO::Pic).

It is well possible that some of these conventions appear to be clumsy at times and the author is keen to hear of any suggestions for better alternatives.

INSTANCE METHODS

new

$onlinedc = new PDL::Doc ('file.pdl',[more files]);

addfiles

add another file to the online database associated with this object.

outfile

set the name of the output file for this online db

ensuredb

Make sure that the database is slurped in

savedb

save the database (i.e., the hash of PDL symbols) to the file associated with this object.

gethash

Return the PDL symhash (e.g. for custom search operations)

The symhash is a multiply nested hash with the following structure:

$symhash = {
    function_name => {
            Module => 'module::name',
            Sig    => 'signature string',
            Bad    => 'bad documentation string',
            ...
        },
    function_name => {
            Module => 'module::name',
            Sig    => 'signature string',
            Bad    => 'bad documentation string',
            ...
        },
    };

The possible keys for each function include:

Module   - module name
Sig      - signature
Crossref - the function name for the documentation, if it has multiple
           names (ex: the documentation for zeros is under zeroes)
Names    - a comma-separated string of the all the function's names
Example  - example text (optional)
Ref      - one-line reference string
Opt      - options
Usage    - short usage explanation
Bad      - explanation of behavior when it encounters bad values

search

Search a PDL symhash

$onldc->search($regex, $fields [, $sort])

Searching is by default case insensitive. Other flags can be given by specifying the regexp in the form m/regex/ismx where / can be replaced with any other non-alphanumeric character. $fields is an array reference for all hash fields (or simply a string if you only want to search one field) that should be matched against the regex. Valid fields are

Name,    # name of the function
Module,  # module the function belongs to
Ref,     # the one-line reference description
Example, # the example for this function
Opt,     # options
File,    # the path to the source file this docs have been extracted from

If you wish to have your results sorted by function name, pass a true value for $sort.

The results will be returned as an array of pairs in the form

@results = (
 [funcname, {SYMHASH_ENTRY}],
 [funcname, {SYMHASH_ENTRY}],
 ...
);

See the example at the end of the documentation to see how you might use this.

scan

Scan a source file using the PDL podparser to extract information for online documentation

scantree

Scan whole directory trees for online documentation in .pm (module definition) and *.pod (general documentation) files (using the File::Find module).

funcdocs

extract the complete documentation about a function from its source file using the PDL::Pod::Parser filter.

FUNCTIONS

PDL::DOC EXAMPLE

Here's an example of how you might use the PDL Doc database in your own code.

use PDL::Doc;
# Find the pdl documentation
my ($dir,$file,$pdldoc);
DIRECTORY: for $dir (@INC) {
    $file = $dir."/PDL/pdldoc.db";
    if (-f $file) {
        print "Found docs database $file\n";
        $pdldoc = new PDL::Doc ($file);
        last DIRECTORY;
    }
}

die ("Unable to find docs database!\n") unless $pdldoc;

# Print the reference line for zeroes:
print $pdldoc->gethash->{zeroes}->{Ref};

# See which examples use zeroes
$pdldoc->search('zeroes', 'Examples', 1);

# All the functions that use zeroes in their example:
my @entries = $pdldoc->search('zeroes', 'Example', 1);
print "Functions that use 'zeroes' in their examples include:\n";
foreach my $entry (@entries) {
    # Unpack the entry
    my ($func_name, $sym_hash) = @$entry;
    print "$func_name\n";
}

print "\n";

# Let's look at the function 'mpdl'
@entries = $pdldoc->search('mpdl', 'Name');
# I know there's only one:
my $entry = $entries[0];
my ($func_name, $sym_hash) = @$entry;
print "mpdl info:\n";
foreach my $key (keys %$sym_hash) {
    # Unpack the entry
    print "---$key---\n$sym_hash->{$key}\n";
}

Finding Modules

How can you tell if you've gotten a module for one of your entries? The Ref entry will begin with 'Module:' if it's a module. In code:

# Prints:
#  Module: fundamental PDL functionality
my $sym_hash = $pdldoc->gethash;
print $pdldoc->gethash->{'PDL::Core'}->{Ref}, "\n"

BUGS

Quite a few shortcomings which will hopefully be fixed following discussions on the pdl-porters mailing list.

AUTHOR

Copyright 1997 Christian Soeller <c.soeller@auckland.ac.nz> and Karl Glazebrook <kgb@aaoepp.aao.gov.au>

Further contributions copyright 2010 David Mertens <dcmertens.perl@gmail.com>

All rights reserved. There is no warranty. You are allowed to redistribute this software / documentation under certain conditions. For details, see the file COPYING in the PDL distribution. If this file is separated from the PDL distribution, the copyright notice should be included in the file.

cpanm PDL

perl -MCPAN -e shell
install PDL