/ 
OpenInteract-1.99_01
River stage zero No dependents
/ OpenInteract2::Manual::LDAP

NAME

OpenInteract2::Manual::LDAP - OpenInteract and LDAP

SYNOPSIS

Discussion of how you can use LDAP with OpenInteract.

DESCRIPTION

With OpenInteract 1.2+ and SPOPS 0.50+, you can now use LDAP not only as a datastore for your objects, but also for authenticating users and determining group membership. This document explains how.

If you can, read this document and follow its instructions before you install and use OpenInteract. Otherwise actions like schema changes can become more difficult.

The Pieces

Additionally, two packages (base_group and base_user) offer options for storing users and groups in LDAP and doing authentication from there. See below for more.

Overall Configuration

First, install SPOPS version 0.50 or higher and run its tests to ensure that the LDAP portion (SPOPS::LDAP) is functioning properly with your LDAP server.

Next, install OpenInteract 1.2 or higher. This includes functionality to manage multiple datasources and connect to LDAP directories.

Next, make the following modifications to the server configuration file:

  • Add relevant connection information to the ldap_info key. This describes one or more LDAP datasources you will use with your system. The usual suspects -- host, port, base DN -- are there, and you can provide a standard bind DN and password as well. (Examples below.)

  • Set the key datasource.default_connection_ldap to the connection to be used when an LDAP object doesn't specify a datasource.

You can test your connection information from oi2_manage:

$ oi2_manage test_ldap --website_dir=/path/to/mysite

This will go through each of the defined datasources and try to connect and bind given the information in the server configuration file.

User/Group Storage and Authentication

Storing users and groups for use in OpenInteract authentication makes things a little trickier. This is supported but still in its infancy, so you might scare up a few gotchas here and there.

You should only need to do the following:

  • Modify the SPOPS configuration files for both users (base_user-x.xx/conf/spops_user.ini) and groups (base_group-x.xx/conf/spops_group.ini) or use and tweak the ones supplied under the same path but named ldap_spops_user.ini and ldap_spops_group.ini.

  • Change the key login.crypt_password to '0' (LDAP takes care of this for you)

  • Modify the server configuration file to set the values for both the id.user_type and id.group_type keys to 'char'. Do this before installing OpenInteract since these keys inform the datatypes of other tables, such as sys_error which stores errors.

  • Modify the server configuration file to set the values for the system users and groups. You can map these to existing users or create new ones. The keys you'll need to modify are:

    default_objects.superuser
default_objects.supergroup
default_objects.public_group
default_objects.site_admin_group<

    See the discussion about 'Object Security' below for more information about this.

  • Note that the 'sasl' key in the ldap_info.$datasource entry has not yet been tested, primarily because we need to setup a development server that has SASL/CRAM-MD5 support properly compiled in..

If you're having issues authenticating, try the following simple script, setting the variables to appropriate values:

 1: #!/usr/bin/perl
 2: 
 3: use strict;
 4: use Net::LDAP;
 5: 
 6: my $host          = 'localhost';
 7: my $port          = 389;
 8: my $bind_dn       = 'cn=Manager,dc=MyCompany,dc=com';
 9: 
10: my $bind_password = 'password';
11: 
12: my $ldap = Net::LDAP->new( $host, port => 389 );
13: die "Cannot make LDAP connection\n" unless ( $ldap );
14: 
15: my $ldap_msg = $ldap->bind( dn => $bind_dn, password => $bind_password );
16: if ( my $code = $ldap_msg->code ) {
17:     die "Error during bind (Code: $code)\n", $ldap_msg->error, "\n";
18: }
19: print "Connect/bind ok.";

OBJECT SECURITY

Security for Existing Data

You might be using LDAP because you have a directory of existing information. If you are doing this, then you need to tell OpenInteract about the security for the objects already in the system.

The base_security package has a script for automating this fairly common action. You'll need to run the script create_object_security.pl found in that package. Here's a sample:

 1: $ export OPENINTERACT2=/path/to/mysite
 2: $ cd pkg/base_security-2.xx/script
 3: $ perl create_object_security.pl \
 4:     --class=OpenInteract2::User \
 5:     --scope=world \
 6:     --level=read
 7: $ perl create_object_security.pl \
 8:     --class=OpenInteract2::User \
 9:     --scope=group \
10:     --scope_id='site admin' \
11:     --level=write
12: $ perl create_object_security.pl \
13:     --class=OpenInteract2::Group \
14:     --scope=world \
15:     --level=read
16: $ perl create_object_security.pl \
17:     --class=OpenInteract2::Group \
18:     --scope=group \
19:     --scope_id='site admin' \
20:     --level=write

You will have to modify 'site admin' to the ID of your site admin group -- whatever you set in the 'default_objects.site_admin_group' key of your server configuration.

These commands will create entries in the security table so that the 'world' security for all users and groups is 'read' and that the site admin group has read/write privileges to all users and groups.

Run the script with the parameter '--help' to get more information about how to run it.

Object Creation Security

As opposed to OI 1.x you should not need to modify the entry in 'creation_security' for every secured SPOPS object. Instead of hardcoding object IDs you can list a key pointing to the 'default_objects' area of the server configuration. For instance, you'll often see a creation security policy declared like this:

1: [object creation_security]
2: user  =
3: group = site_admin_group:WRITE
4: world = READ

The 'site_admin_group' gets replaced at server startup by the server configuration entry 'default_objects.site_admin_group'. So no matter whether you use LDAP or DBI you just need to change that value and restart.

EXAMPLES

Server Configuration

The following defines two connections: 'main_ldap' and 'auth_ldap'. The first describes a connection using an anonymous bind, while the second specifies a bind DN and password. The second also uses a different port than the first.

 1: [datasource_type LDAP]
 2: connection_manager = OpenInteract2::Datasource::LDAP
 3: spops_config       = OpenInteract2::SPOPS::LDAP
 4: 
 5: [datasource main_ldap]
 6: type          = LDAP
 7: spops         = SPOPS::LDAP
 8: host          = ldap.myco.com
 9: port          = 389
10: bind_dn       =
11: bind_password =
12: base_dn       = dc=MyCo,dc=com
13: timeout       = 120
14: version       = 2
15: sasl          = 0
16: debug         = 0
17: 
18: [datasource auth_ldap]
19: type          = LDAP
20: spops         = SPOPS::LDAP
21: host          = ldap.myco.com
22: port          = 3890
23: bind_dn       = cn=Manager,dc=MyCo,dc=com
24: bind_password = crystalline
25: base_dn       = dc=MyCo,dc=com
26: timeout       = 120
27: version       = 2
28: sasl          = 0
29: debug         = 0

Object Configuration

Here's a sample configuration, from the 'base_user' package. One important thing to note: you do not need to use a full DN for ldap_base_dn -- OpenInteract2::SPOPS::LDAP overrides the method base_dn() and prepends the value from ldap_base_dn to the value from base_dn in your datasource.

So if we were to use the example below with the 'main' datasource, the base DN of these objects would be:

1:                ou=People --> From the object
2:         + dc=MyCo,dc=com --> From the 'main' datasource
3:         ================
4: ou=People,dc=MyCo,dc=com --> Base DN used

If you're using multiple datasources, ldap_base_dn needs to be a hashref with the keys as datasources and the values as the partial base DN for that datasource. See SPOPS::LDAP::MultiDatasource for more information.

 1: [user]
 2: class                   = OpenInteract2::User
 3: code_class              = OpenInteract2::User::LDAP
 4: isa                     = OpenInteract2::User
 5: is_secure               = yes
 6: field                   = cn
 7: field                   = sn
 8: field                   = givenname
 9: field                   = mail
10: field                   = userpassword
11: field                   = uid
12: field                   = objectclass
13: multivalue              = objectclass
14: id_field                = cn
15: ldap_base_dn            = ou=People
16: ldap_object_class       = top
17: ldap_object_class       = person
18: ldap_object_class       = inetOrgPerson
19: ldap_object_class       = organizationalPerson
20: ldap_fetch_object_class = person
21: name                    = full_name
22: object_name             = User
23: 
24: [user field_map]
25: last_name  = sn
26: first_name = givenname
27: password   = userpassword
28: login_name = uid
29: email      = mail
30: user_id    = uid
31: 
32: [user links_to]
33: OpenInteract::Group = uniquemember
34: 
35: [user creation_security]
36: user  = 
37: group = site_admin_group:WRITE
38: world = READ
39: 
40: [user track]
41: create = 0
42: update = 1
43: remove = 1
44: 
45: [user display]
46: ACTION = user
47: TASK   = display

MULTIPLE DATASOURCES

You can use multiple datasources in two different ways

  • Use multiple datasources for the same class. This enables you to search for an entry once and have the search get executed on multiple directories. Read about how this works and how you set it up in SPOPS::LDAP::MultiDatasource

  • Use a single datasource per a class but have multiple directories available. For instance, you might run one LDAP directory for all equipment in your organization and another for all employees and groups.

    For this, you simply need to configure all datasources in your server configuration, then tell each SPOPS class which datasource it should use. To tell a class, you need to use the datasource key in its configuration:

    1: [myequipment]
2: class      = My::Equipment
3: datasource = equipment
4: ...

    This class would use the connection information stored under the key 'equipment' in your server configuration.

    There are other configuration details to be aware of -- please see SPOPS::LDAP::MultiDatasource for more infromation.

COPYRIGHT

Copyright (c) 2001-2003 Chris Winters. All rights reserved.

AUTHORS

Chris Winters <Chris@cwinters.com>