NAME
Config::Model::models::LCDd::picolcd - Configuration class LCDd::picolcd
VERSION
version 2.004
DESCRIPTION
Configuration classes used by Config::Model
Elements
KeyTimeout
KeyTimeout is the time in ms that LCDd spends waiting for a key press before cycling through other duties. Higher values make LCDd use less CPU time and make key presses more detectable. Lower values make LCDd more responsive but a little prone to missing key presses. 500 (.5 second) is the default and a balanced value. Optional. Type integer. upstream_default: '500'.
Backlight
Sets the initial state of the backlight upon start-up.Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.
Brightness
Set the initial brightness . Works only with the 20x4 device. Optional. Type integer. upstream_default: '1000'.
OffBrightness
Set the brightness while the backlight is 'off' . Works only with the 20x4 device.Optional. Type integer. upstream_default: '0'.
Contrast
Set the initial contrast Optional. Type integer. upstream_default: '1000'.
Keylights
Light the keys? Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.
Key0Light
If Keylights is on, the you can unlight specific keys below: Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. There is no LED for the +/- keys. This is a handy way to indicate to users which keys are disabled. Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.
Key1Light
Optional. Type uniline. default: 'on'.
Key2Light
Optional. Type uniline. default: 'on'.
Key3Light
Optional. Type uniline. default: 'on'.
Key4Light
Optional. Type uniline. default: 'on'.
Key5Light
Optional. Type uniline. default: 'on'.
LircHost
Host name or IP address of the LIRC instance that is to receive IR codes If not set, or set to an empty value, IR support is disabled.Optional. Type uniline. default: '127.0.0.1'.
LircPort
UDP port on which LIRC is listening Optional. Type integer. upstream_default: '8765'.
LircFlushThreshold
Threshold in jiffies of synthesized gap that triggers flushing the IR data to lirc 100 means 6.1ms. legal: 16 - 32767; Use 0 to disable.Optional. Type integer. upstream_default: '100'.