/ 
feedgnuplot-1.38
River stage zero No dependents
/ feedgnuplot

NAME

feedgnuplot - General purpose pipe-oriented plotting tool

SYNOPSIS

Simple plotting of piped data:

$ seq 5 | awk '{print 2*$1, $1*$1}'
2 1
4 4
6 9
8 16
10 25

$ seq 5 | awk '{print 2*$1, $1*$1}' |
  feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1
              --terminal 'dumb 80,40' --exit

                                 Test plot

 10 ++------+--------+-------+-------+-------+--------+-------+------*A 25
    +       +        +       +       +       +        +       +    **#+
    |       :        :       :       :       :        : data 0+**A*** |
    |       :        :       :       :       :        :       :** #   |
  9 ++.......................................................**.##....|
    |       :        :       :       :       :        :    ** :#      |
    |       :        :       :       :       :        :  **   #       |
    |       :        :       :       :       :        :**   ##:      ++ 20
  8 ++................................................A....#..........|
    |       :        :       :       :       :      **:   #   :       |
    |       :        :       :       :       :    **  : ##    :       |
    |       :        :       :       :       :  **    :#      :       |
    |       :        :       :       :       :**      B       :       |
  7 ++......................................**......##................|
    |       :        :       :       :    ** :    ##  :       :      ++ 15
    |       :        :       :       :  **   :   #    :       :       |
    |       :        :       :       :**     : ##     :       :       |
  6 ++..............................*A.......##.......................|
    |       :        :       :    ** :     ##:        :       :       |
    |       :        :       :  **   :    #  :        :       :       |
    |       :        :       :**     :  ##   :        :       :      ++ 10
  5 ++......................**........##..............................|
    |       :        :    ** :      #B       :        :       :       |
    |       :        :  **   :    ## :       :        :       :       |
    |       :        :**     :  ##   :       :        :       :       |
  4 ++...............A.......###......................................|
    |       :      **:     ##:       :       :        :       :       |
    |       :    **  :   ##  :       :       :        :       :      ++ 5
    |       :  **    : ##    :       :       :        :       :       |
    |       :**    ##B#      :       :       :        :       :       |
  3 ++.....**..####...................................................|
    |    **####      :       :       :       :        :       :       |
    |  **## :        :       :       :       :        :       :       |
    B**     +        +       +       +       +        +       +       +
  2 A+------+--------+-------+-------+-------+--------+-------+------++ 0
    1      1.5       2      2.5      3      3.5       4      4.5      5

Simple real-time plotting example: plot how much data is received on the wlan0 network interface in bytes/second (uses bash, awk and Linux):

$ while true; do sleep 1; cat /proc/net/dev; done |
  gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
  feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds

DESCRIPTION

This is a flexible, command-line-oriented frontend to Gnuplot. It creates plots from data coming in on STDIN or given in a filename passed on the commandline. Various data representations are supported, as is hardcopy output and streaming display of live data. A simple example:

$ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot

You should see a plot with two curves. The awk command generates some data to plot and the feedgnuplot reads it in from STDIN and generates the plot. The awk invocation is just an example; more interesting things would be plotted in normal usage. No commandline-options are required for the most basic plotting. Input parsing is flexible; every line need not have the same number of points. New curves will be created as needed.

The most commonly used functionality of gnuplot is supported directly by the script. Anything not directly supported can still be done with options such as --set, --extracmds --style, etc. Arbitrary gnuplot commands can be passed in with --extracmds. For example, to turn off the grid, you can pass in --extracmds 'unset grid'. Commands --set and --unset exists to provide nicer syntax, so this is equivalent to passing --unset grid. As many of these options as needed can be passed in. To add arbitrary curve styles, use --style curveID extrastyle. Pass these more than once to affect more than one curve.

To apply an extra style to all the curves that lack an explicit --style, pass in --styleall extrastyle. In the most common case, the extra style is with something. To support this more simply, you can pass in --with something instead of --styleall 'with something'. --styleall and --with are mutually exclusive. Furthermore any curve-specific --style overrides the global --styleall or --with setting.

Data formats

By default, each value present in the incoming data represents a distinct data point, as demonstrated in the original example above (we had 10 numbers in the input and 10 points in the plot). If requested, the script supports more sophisticated interpretation of input data

Domain selection

If --domain is passed in, the first value on each line of input is interpreted as the X-value for the rest of the data on that line. Without --domain the X-value is the line number, and the first value on a line is a plain data point like the others. Default is --nodomain. Thus the original example above produces 2 curves, with 1,2,3,4,5 as the X-values. If we run the same command with --domain:

$ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --domain

we get only 1 curve, with 2,4,6,8,10 as the X-values. As many points as desired can appear on a single line, but all points on a line are associated with the X-value at the start of that line.

Curve indexing

By default, each column represents a separate curve. This is fine unless sparse data is to be plotted. With the --dataid option, each point is represented by 2 values: a string identifying the curve, and the value itself. If we add --dataid to the original example:

$ seq 5 | awk '{print 2*$1, $1*$1}' | feedgnuplot --dataid --autolegend

we get 5 different curves with one point in each. The first column, as produced by awk, is 2,4,6,8,10. These are interpreted as the IDs of the curves to be plotted. The --autolegend option adds a legend using the given IDs to label the curves. The IDs need not be numbers; generic strings are accepted. As many points as desired can appear on a single line. --domain can be used in conjunction with --dataid.

Multi-value style support

Depending on how gnuplot is plotting the data, more than one value may be needed to represent the range of a single point. Basic 2D plots have 2 numbers representing each point: 1 domain and 1 range. But if plotting with --circles, for instance, then there's an extra range value: the radius. A similar situation exists with --colormap where each point contains the position and the color. There are other gnuplot styles that require more data (such as error bars), but none of these are directly supported by the script. They can still be used, however, by specifying the specific style with --style, and specifying how many values are needed for each point with --rangesizeall or --rangesize or --extraValuesPerPoint. Those options that specify the range size are required only for styles not explicitly supported by feedgnuplot; supported styles do the right thing automatically.

More examples: if making a 2d plot of y error bars where gnuplot expects a (x,y,ydelta) tuple for each point, you want --rangesizeall 2 because you have one domain value (x) and 2 range values (y,ydelta). Gnuplot can also plot lopsided y errorbars by giving a tuple (x,y,ylow,yhigh). This is similar as before, but you want --rangesizeall 3 instead.

3D data

To plot 3D data, pass in --3d. --domain MUST be given when plotting 3D data to avoid domain ambiguity. If 3D data is being plotted, there are by definition 2 domain values instead of one (Z as a function of X and Y instead of Y as a function of X). Thus the first 2 values on each line are interpreted as the domain instead of just 1. The rest of the processing happens the same way as before.

Time/date data

If the input data domain is a time/date, this can be interpreted with --timefmt. This option takes a single argument: the format to use to parse the data. The format is documented in 'set timefmt' in gnuplot, although the common flags that strftime understands are generally supported. The backslash sequences in the format are not supported, so if you want a tab, put in a tab instead of \t. Whitespace in the format is supported. When this flag is given, some other options act a little bit differently:

  • --xlen is an integer in seconds

  • --xmin and --xmax must use the format passed in to --timefmt

Using this option changes both the way the input is parsed and the way the x-axis tics are labelled. Gnuplot tries to be intelligent in this labelling, but it doesn't always do what the user wants. The labelling can be controlled with the gnuplot set format command, which takes the same type of format string as --timefmt. Example:

$ sar 1 -1 |
  awk '$1 ~ /..:..:../ && $8 ~/^[0-9\.]*$/ {print $1,$8; fflush()}' |
  feedgnuplot --stream --domain
               --lines --timefmt '%H:%M:%S'
               --set 'format x "%H:%M:%S"'

This plots the 'idle' CPU consumption against time.

Note that while gnuplot supports the time/date on any axis, feedgnuplot currently supports it only as the x-axis domain. This may change in the future.

Real-time streaming data

To plot real-time data, pass in the --stream [refreshperiod] option. Data will then be plotted as it is received. The plot will be updated every refreshperiod seconds. If the period isn't specified, a 1Hz refresh rate is used. To refresh at specific intervals indicated by the data, set the refreshperiod to 0 or to 'trigger'. The plot will then only be refreshed when a data line 'replot' is received. This 'replot' command works in both triggered and timed modes, but in triggered mode, it's the only way to replot. Look in "Special data commands" for more information.

To plot only the most recent data (instead of all the data), --xlen windowsize can be given. This will create an constantly-updating, scrolling view of the recent past. windowsize should be replaced by the desired length of the domain window to plot, in domain units (passed-in values if --domain or line numbers otherwise). If the domain is a time/date via --timefmt, then windowsize is and integer in seconds.

Special data commands

If we are reading streaming data, the input stream can contain special commands in addition to the raw data. Feedgnuplot looks for these at the start of every input line. If a command is detected, the rest of the line is discarded. These commands are

replot

This command refreshes the plot right now, instead of waiting for the next refresh time indicated by the timer. This command works in addition to the timed refresh, as indicated by --stream [refreshperiod].

clear

This command clears out the current data in the plot. The plotting process continues, however, to any data following the clear.

exit

This command causes feedgnuplot to exit.

Hardcopy output

The script is able to produce hardcopy output with --hardcopy outputfile. The output type can be inferred from the filename, if .ps, .eps, .pdf, .svg or .png is requested. If any other file type is requested, --terminal must be passed in to tell gnuplot how to make the plot.

Self-plotting data files

This script can be used to enable self-plotting data files. There are 2 ways of doing this: with a shebang (#!) or with inline perl data.

Self-plotting data with a #!

A self-plotting, executable data file data is formatted as

$ cat data
#!/usr/bin/feedgnuplot --lines --points
2 1
4 4
6 9
8 16
10 25
12 36
14 49
16 64
18 81
20 100
22 121
24 144
26 169
28 196
30 225

This is the shebang (#!) line followed by the data, formatted as before. The data file can be plotted simply with

$ ./data

The caveats here are that on Linux the whole #! line is limited to 127 characters and that the full path to feedgnuplot must be given. The 127 character limit is a serious limitation, but this can likely be resolved with a kernel patch. I have only tried on Linux 2.6.

Self-plotting data with perl inline data

Perl supports storing data and code in the same file. This can also be used to create self-plotting files:

$ cat plotdata.pl
#!/usr/bin/perl
use strict;
use warnings;

open PLOT, "| feedgnuplot --lines --points" or die "Couldn't open plotting pipe";
while( <DATA> )
{
  my @xy = split;
  print PLOT "@xy\n";
}
__DATA__
2 1
4 4
6 9
8 16
10 25
12 36
14 49
16 64
18 81
20 100
22 121
24 144
26 169
28 196
30 225

This is especially useful if the logged data is not in a format directly supported by feedgnuplot. Raw data can be stored after the __DATA__ directive, with a small perl script to manipulate the data into a useable format and send it to the plotter.

ARGUMENTS

  • --[no]domain

    If enabled, the first element of each line is the domain variable. If not, the point index is used

  • --[no]dataid

    If enabled, each data point is preceded by the ID of the data set that point corresponds to. This ID is interpreted as a string, NOT as just a number. If not enabled, the order of the point is used.

    As an example, if line 3 of the input is "0 9 1 20" then

    • --nodomain --nodataid would parse the 4 numbers as points in 4 different curves at x=3

    • --domain --nodataid would parse the 4 numbers as points in 3 different curves at x=0. Here, 0 is the x-variable and 9,1,20 are the data values

    • --nodomain --dataid would parse the 4 numbers as points in 2 different curves at x=3. Here 0 and 1 are the data IDs and 9 and 20 are the data values

    • --domain --dataid would parse the 4 numbers as a single point at x=0. Here 9 is the data ID and 1 is the data value. 20 is an extra value, so it is ignored. If another value followed 20, we'd get another point in curve ID 20

  • --[no]3d

    Do [not] plot in 3D. This only makes sense with --domain. Each domain here is an (x,y) tuple

  • --timefmt [format]

    Interpret the X data as a time/date, parsed with the given format

  • --colormap

    Show a colormapped xy plot. Requires extra data for the color. zmin/zmax can be used to set the extents of the colors. Automatically sets the --rangesize.

  • --stream [period]

    Plot the data as it comes in, in realtime. If period is given, replot every period seconds. If no period is given, replot at 1Hz. If the period is given as 0 or 'trigger', replot only when the incoming data dictates this. See the "Real-time streaming data" section of the man page.

  • --[no]lines

    Do [not] draw lines to connect consecutive points

  • --[no]points

    Do [not] draw points

  • --circles

    Plot with circles. This requires a radius be specified for each point. Automatically sets the --rangesize. Not supported for 3d plots.

  • --title xxx

    Set the title of the plot

  • --legend curveID legend

    Set the label for a curve plot. Use this option multiple times for multiple curves. With --dataid, curveID is the ID. Otherwise, it's the index of the curve, starting at 0

  • --autolegend

    Use the curve IDs for the legend. Titles given with --legend override these

  • --xlen xxx

    When using --stream, sets the size of the x-window to plot. Omit this or set it to 0 to plot ALL the data. Does not make sense with 3d plots. Implies --monotonic

  • --xmin/xmax/ymin/ymax/y2min/y2max/zmin/zmax xxx

    Set the range for the given axis. These x-axis bounds are ignored in a streaming plot. The y2-axis bound do not apply in 3d plots. The z-axis bounds apply only to 3d plots or colormaps.

  • --xlabel/ylabel/y2label/zlabel xxx

    Label the given axis. The y2-axis label does not apply to 3d plots while the z-axis label applies only to 3d plots.

  • --y2 xxx

    Plot the data specified by this curve ID on the y2 axis. Without --dataid, the ID is just an ordered 0-based index. Does not apply to 3d plots. Can be passed multiple times, or passed a comma-separated list. By default the y2-axis curves look the same as the y-axis ones. I.e. the viewer of the resulting plot has to be told which is which via an axes label, legend, etc. Prior to version 1.25 of feedgnuplot the curves plotted on the y2 axis were drawn with a thicker line. This is no longer the case, but that behavior can be brought back by passing something like

    --y2 curveid --style curveid 'linewidth 3'

  • --histogram curveID

    Set up a this specific curve to plot a histogram. The bin width is given with the --binwidth option (assumed 1.0 if omitted). If a drawing style is not specified for this curve (--curvestyle) or all curves (--with, --curvestyleall) then the default histogram style is set: filled boxes with borders. This is what the user generally wants. This works with --domain and/or --stream, but in those cases the x-value is used only to cull old data because of --xlen or --monotonic. I.e. the x-values are not drawn in any way. Can be passed multiple times, or passed a comma- separated list

  • --binwidth width

    The width of bins when making histograms. This setting applies to ALL histograms in the plot. Defaults to 1.0 if not given.

  • --histstyle style

    Normally, histograms are generated with the 'smooth frequency' gnuplot style. --histstyle can be used to select different smooth settings (see the gnuplot help smooth page for more info). Allowed values are 'frequency' (the default), 'fnormal' (available in very recent gnuplots), 'unique', 'cumulative' and 'cnormal'. 'fnormal' is a normalized histogram. 'unique' indicates whether a bin has at least one item in it: instead of counting the items, it'll always report 0 or 1. 'cumulative' is the integral of the 'frequency' histogram. 'cnormal' is like 'cumulative', but rescaled to end up at 1.0.

  • --style curveID style

    Additional styles per curve. With --dataid, curveID is the ID. Otherwise, it's the index of the curve, starting at 0. Use this option multiple times for multiple curves. --styleall does not apply to curves that have a --style

  • --curvestyle curveID

    Synonym for --style

  • --styleall xxx

    Additional styles for all curves that have no --style. This is overridden by any applicable --style. Exclusive with --with.

  • --curvestyleall xxx

    Synonym for --styleall

  • --with xxx

    Same as --styleall, but prefixed with "with". Thus

    --with boxes

    is equivalent to

    --styleall 'with boxes'

    Exclusive with --styleall.

  • --extracmds xxx

    Additional commands to pass on to gnuplot verbatim. These could contain extra global styles for instance. Can be passed multiple times.

  • --set xxx

    Additional 'set' commands to pass on to gnuplot verbatim. --set 'a b c' will result in gnuplot seeing a set a b c command. Can be passed multiple times.

  • --unset xxx

    Additional 'unset' commands to pass on to gnuplot verbatim. --unset 'a b c' will result in gnuplot seeing a unset a b c command. Can be passed multiple times.

  • --equation xxx

    Gnuplot can plot both data and symbolic equations. feedgnuplot generally plots data, but with this option can plot symbolic equations also. This is generally intended to augment data plots, since for equation-only plots you don't need feedgnuplot. --equation can be passed multiple times for multiple equations. The given strings are passed to gnuplot directly without any thing added or removed, so styling and such should be applied in the string. A basic example:

    seq 100 | awk '{print $1/10, $1/100}' |
  feedgnuplot --with 'lines lw 3' --domain --ymax 1
              --equation 'sin(x)/x' --equation 'cos(x)/x with lines lw 4'

    Here I plot the incoming data (points along a line) with the given style (a line with thickness 3), and I plot two damped sinusoids on the same plot. The sinusoids are not affected by feedgnuplot styling, so their styles are set separately, as in this example. More complicated example:

    seq 360 | perl -nE '$th=$_/360 * 3.14*2; $c=cos($th); $s=sin($th); say "$c $s"' |
  feedgnuplot --domain --square
              --set parametric --set "trange [0:2*3.14]" --equation "sin(t),cos(t)"

    Here the data I generate is points along the unit circle. I plot these as points, and I also plot a true circle as a parametric equation.

  • --square

    Plot data with aspect ratio 1. For 3D plots, this controls the aspect ratio for all 3 axes

  • --square_xy

    For 3D plots, set square aspect ratio for ONLY the x,y axes

  • --hardcopy xxx

    If not streaming, output to a file specified here. Format inferred from filename, unless specified by --terminal

  • --terminal xxx

    String passed to 'set terminal'. No attempts are made to validate this. --hardcopy sets this to some sensible defaults if --hardcopy is given .png, .pdf, .ps, .eps or .svg. If any other file type is desired, use both --hardcopy and --terminal

  • --maxcurves xxx

    The maximum allowed number of curves. This is 100 by default, but can be reset with this option. This exists purely to prevent perl from allocating all of the system's memory when reading bogus data

  • --monotonic

    If --domain is given, checks to make sure that the x- coordinate in the input data is monotonically increasing. If a given x-variable is in the past, all data currently cached for this curve is purged. Without --monotonic, all data is kept. Does not make sense with 3d plots. No --monotonic by default. The data is replotted before being purged

  • --rangesize curveID xxx

    The options --rangesizeall, --rangesize and --extraValuesPerPoint set the number of values are needed to represent each point being plotted (see "Multi-value style support" above). These options are only needed if unknown styles are used, with --styleall or --with for instance.

    --rangesize is used to set how many values are needed to represent the range of a point for a particular curve. This overrides any defaults that may exist for this curve only.

  • --rangesizeall xxx

    Like --rangesize, but applies to all the curves.

    --extraValuesPerPoint xxx

    Like --rangesizeall, but instead of overriding the default, adds to it. For example, if plotting non-lopsided y errorbars gnuplot wants (x,y,ydelta) tuples. These can be specified both with --rangesizeall 2 (because there are 2 range values) or --extraValuesPerPoint 1 (because there's 1 more value than usual).

    This option is only needed if unknown styles are used, with --styleall or --with for instance.

  • --dump

    Instead of printing to gnuplot, print to STDOUT. Very useful for debugging. It is possible to send the output produced this way to gnuplot directly.

  • --exit

    This controls the details of what happens when the input data is exhausted, or when some part of the feedgnuplot pipeline is killed. This option does different things depending on whether --stream is active, so read this closely.

    With interactive gnuplot terminals (qt, x11, wxt), the plot windows live in a separate process from the main gnuplot process. It is thus possible for the main gnuplot process to exit, while leaving the plot windows up (a caveat is that such decapitated windows aren't interactive). To be clear, there are 3 possible states:

    Alive: feedgnuplot, gnuplot alive, plot window process alive, no shell prompt (shell busy with feedgnuplot)
    Half-alive: feedgnuplot, gnuplot dead, plot window process alive (but non-interactive), shell prompt available
    Dead: feedgnuplot, gnuplot dead, plot window process dead, shell prompt available

    The --exit option controls the details of this behavior. The possibilities are:

    No --stream, input pipe is exhausted (all data read in)
    default; no --exit

    Alive. Need to Ctrl-C to get back into the shell

    --exit

    Half-alive. Non-interactive prompt up, and the shell accepts new commands. Without --stream the goal is to show a plot, so a Dead state is not useful here.

    --stream, input pipe is exhausted (all data read in) or the feedgnuplot process terminated
    default; no --exit

    Alive. Need to Ctrl-C to get back into the shell

    --exit

    Dead. No plot is shown, and the shell accepts new commands. With --stream the goal is to show a plot as the data comes in, which we have been doing. Now that we're done, we can clean up everything.

    Note that one usually invokes feedgnuplot as a part of a shell pipeline:

    $ write_data | feedgnuplot

    If the user terminates this pipeline with ^C, then all the processes in the pipeline receive SIGINT. This normally kills feedgnuplot and all its gnuplot children, and we let this happen unless --stream and no --exit. If --stream and no --exit, then we ignore the first ^C. The data feeder dies, and we behave as if the input data was exhausted. A second ^C kills us also.

  • --geometry

    If using X11, specifies the size, position of the plot window

  • --version

    Print the version and exit

RECIPES

Basic plotting of piped data

$ seq 5 | awk '{print 2*$1, $1*$1}'
2 1
4 4
6 9
8 16
10 25

$ seq 5 | awk '{print 2*$1, $1*$1}' |
  feedgnuplot --lines --points --legend 0 "data 0" --title "Test plot" --y2 1

Realtime plot of network throughput

Looks at wlan0 on Linux.

$ while true; do sleep 1; cat /proc/net/dev; done |
  gawk '/wlan0/ {if(b) {print $2-b; fflush()} b=$2}' |
  feedgnuplot --lines --stream --xlen 10 --ylabel 'Bytes/sec' --xlabel seconds

Realtime plot of battery charge in respect to time

Uses the result of the acpi command.

$ while true; do acpi; sleep 15; done |
  perl -nE 'BEGIN{ $| = 1; } /([0-9]*)%/; say join(" ", time(), $1);' |
  feedgnuplot --stream --ymin 0 --ymax 100 --lines --domain --xlabel 'Time' --timefmt '%s' --ylabel "Battery charge (%)"

Realtime plot of temperatures in an IBM Thinkpad

Uses /proc/acpi/ibm/thermal, which reports temperatures at various locations in a Thinkpad.

$ while true; do cat /proc/acpi/ibm/thermal | awk '{$1=""; print}' ; sleep 1; done |
  feedgnuplot --stream --xlen 100 --lines --autolegend --ymax 100 --ymin 20 --ylabel 'Temperature (deg C)'

Plotting a histogram of file sizes in a directory, granular to 10MB

$ ls -l | awk '{print $5/1e6}' |
  feedgnuplot --histogram 0
    --binwidth 10
    --ymin 0 --xlabel 'File size (MB)' --ylabel Frequency

ACKNOWLEDGEMENT

This program is originally based on the driveGnuPlots.pl script from Thanassis Tsiodras. It is available from his site at http://users.softlab.ece.ntua.gr/~ttsiod/gnuplotStreaming.html

REPOSITORY

https://github.com/dkogan/feedgnuplot

AUTHOR

Dima Kogan, <dima@secretsauce.net>

LICENSE AND COPYRIGHT

Copyright 2011-2012 Dima Kogan.

This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License.

See http://dev.perl.org/licenses/ for more information.