/ 
Moose-1.9906-TRIAL
River stage four • 2950 direct dependents • 4061 total dependents
/ Moose::Util::TypeConstraints

NAME

Moose::Util::TypeConstraints - Type constraint system for Moose

VERSION

version 1.9906

SYNOPSIS

use Moose::Util::TypeConstraints;

subtype 'Natural'
    => as 'Int'
    => where { $_ > 0 };

subtype 'NaturalLessThanTen'
    => as 'Natural'
    => where { $_ < 10 }
    => message { "This number ($_) is not less than ten!" };

coerce 'Num'
    => from 'Str'
      => via { 0+$_ };

enum 'RGBColors' => qw(red green blue);

no Moose::Util::TypeConstraints;

DESCRIPTION

This module provides Moose with the ability to create custom type constraints to be used in attribute definition.

Important Caveat

This is NOT a type system for Perl 5. These are type constraints, and they are not used by Moose unless you tell it to. No type inference is performed, expressions are not typed, etc. etc. etc.

A type constraint is at heart a small "check if a value is valid" function. A constraint can be associated with an attribute. This simplifies parameter validation, and makes your code clearer to read, because you can refer to constraints by name.

Slightly Less Important Caveat

It is always a good idea to quote your type names.

This prevents Perl from trying to execute the call as an indirect object call. This can be an issue when you have a subtype with the same name as a valid class.

For instance:

subtype DateTime => as Object => where { $_->isa('DateTime') };

will just work, while this:

use DateTime;
subtype DateTime => as Object => where { $_->isa('DateTime') };

will fail silently and cause many headaches. The simple way to solve this, as well as future proof your subtypes from classes which have yet to have been created, is to quote the type name:

use DateTime;
subtype 'DateTime' => as 'Object' => where { $_->isa('DateTime') };

Default Type Constraints

This module also provides a simple hierarchy for Perl 5 types, here is that hierarchy represented visually.

Any
Item
    Bool
    Maybe[`a]
    Undef
    Defined
        Value
            Str
                Num
                    Int
                ClassName
                RoleName
        Ref
            ScalarRef[`a]
            ArrayRef[`a]
            HashRef[`a]
            CodeRef
            RegexpRef
            GlobRef
                FileHandle
            Object

NOTE: Any type followed by a type parameter [`a] can be parameterized, this means you can say:

ArrayRef[Int]    # an array of integers
HashRef[CodeRef] # a hash of str to CODE ref mappings
ScalarRef[Int]   # a reference to an integer
Maybe[Str]       # value may be a string, may be undefined

If Moose finds a name in brackets that it does not recognize as an existing type, it assumes that this is a class name, for example ArrayRef[DateTime].

NOTE: Unless you parameterize a type, then it is invalid to include the square brackets. I.e. ArrayRef[] will be treated as a new type name, not as a parameterization of ArrayRef.

NOTE: The Undef type constraint for the most part works correctly now, but edge cases may still exist, please use it sparingly.

NOTE: The ClassName type constraint does a complex package existence check. This means that your class must be loaded for this type constraint to pass.

NOTE: The RoleName constraint checks a string is a package name which is a role, like 'MyApp::Role::Comparable'.

Type Constraint Naming

Type name declared via this module can only contain alphanumeric characters, colons (:), and periods (.).

Since the types created by this module are global, it is suggested that you namespace your types just as you would namespace your modules. So instead of creating a Color type for your My::Graphics module, you would call the type My::Graphics::Types::Color instead.

Use with Other Constraint Modules

This module can play nicely with other constraint modules with some slight tweaking. The where clause in types is expected to be a CODE reference which checks it's first argument and returns a boolean. Since most constraint modules work in a similar way, it should be simple to adapt them to work with Moose.

For instance, this is how you could use it with Declare::Constraints::Simple to declare a completely new type.

type 'HashOfArrayOfObjects',
    {
    where => IsHashRef(
        -keys   => HasLength,
        -values => IsArrayRef(IsObject)
    )
};

For more examples see the t/200_examples/004_example_w_DCS.t test file.

Here is an example of using Test::Deep and it's non-test related eq_deeply function.

type 'ArrayOfHashOfBarsAndRandomNumbers'
    => where {
        eq_deeply($_,
            array_each(subhashof({
                bar           => isa('Bar'),
                random_number => ignore()
            })))
      };

For a complete example see the t/200_examples/005_example_w_TestDeep.t test file.

FUNCTIONS

Type Constraint Constructors

The following functions are used to create type constraints. They will also register the type constraints your create in a global registry that is used to look types up by name.

See the "SYNOPSIS" for an example of how to use these.

subtype 'Name' => as 'Parent' => where { } ...

This creates a named subtype.

If you provide a parent that Moose does not recognize, it will automatically create a new class type constraint for this name.

When creating a named type, the subtype function should either be called with the sugar helpers (where, message, etc), or with a name and a hashref of parameters:

subtype( 'Foo', { where => ..., message => ... } );

The valid hashref keys are as (the parent), where, message, and optimize_as.

subtype as 'Parent' => where { } ...

This creates an unnamed subtype and will return the type constraint meta-object, which will be an instance of Moose::Meta::TypeConstraint.

When creating an anonymous type, the subtype function should either be called with the sugar helpers (where, message, etc), or with just a hashref of parameters:

subtype( { where => ..., message => ... } );
class_type ($class, ?$options)

Creates a new subtype of Object with the name $class and the metaclass Moose::Meta::TypeConstraint::Class.

role_type ($role, ?$options)

Creates a Role type constraint with the name $role and the metaclass Moose::Meta::TypeConstraint::Role.

maybe_type ($type)

Creates a type constraint for either undef or something of the given type.

duck_type ($name, \@methods)

This will create a subtype of Object and test to make sure the value can() do the methods in \@methods.

This is intended as an easy way to accept non-Moose objects that provide a certain interface. If you're using Moose classes, we recommend that you use a requires-only Role instead.

duck_type (\@methods)

If passed an ARRAY reference as the only parameter instead of the $name, \@methods pair, this will create an unnamed duck type. This can be used in an attribute definition like so:

has 'cache' => (
    is  => 'ro',
    isa => duck_type( [qw( get_set )] ),
);
enum ($name, \@values)

This will create a basic subtype for a given set of strings. The resulting constraint will be a subtype of Str and will match any of the items in \@values. It is case sensitive. See the "SYNOPSIS" for a simple example.

NOTE: This is not a true proper enum type, it is simply a convenient constraint builder.

enum (\@values)

If passed an ARRAY reference as the only parameter instead of the $name, \@values pair, this will create an unnamed enum. This can then be used in an attribute definition like so:

has 'sort_order' => (
    is  => 'ro',
    isa => enum([qw[ ascending descending ]]),
);
as 'Parent'

This is just sugar for the type constraint construction syntax.

It takes a single argument, which is the name of a parent type.

where { ... }

This is just sugar for the type constraint construction syntax.

It takes a subroutine reference as an argument. When the type constraint is tested, the reference is run with the value to be tested in $_. This reference should return true or false to indicate whether or not the constraint check passed.

message { ... }

This is just sugar for the type constraint construction syntax.

It takes a subroutine reference as an argument. When the type constraint fails, then the code block is run with the value provided in $_. This reference should return a string, which will be used in the text of the exception thrown.

optimize_as { ... }

This can be used to define a "hand optimized" version of your type constraint which can be used to avoid traversing a subtype constraint hierarchy.

NOTE: You should only use this if you know what you are doing. All the built in types use this, so your subtypes (assuming they are shallow) will not likely need to use this.

type 'Name' => where { } ...

This creates a base type, which has no parent.

The type function should either be called with the sugar helpers (where, message, etc), or with a name and a hashref of parameters:

type( 'Foo', { where => ..., message => ... } );

The valid hashref keys are where, message, and optimize_as.

Type Constraint Utilities

match_on_type $value => ( $type => \&action, ... ?\&default )

This is a utility function for doing simple type based dispatching similar to match/case in OCaml and case/of in Haskell. It is not as featureful as those languages, nor does not it support any kind of automatic destructuring bind. Here is a simple Perl pretty printer dispatching over the core Moose types.

sub ppprint {
    my $x = shift;
    match_on_type $x => (
        HashRef => sub {
            my $hash = shift;
            '{ '
                . (
                join ", " => map { $_ . ' => ' . ppprint( $hash->{$_} ) }
                    sort keys %$hash
                ) . ' }';
        },
        ArrayRef => sub {
            my $array = shift;
            '[ ' . ( join ", " => map { ppprint($_) } @$array ) . ' ]';
        },
        CodeRef   => sub {'sub { ... }'},
        RegexpRef => sub { 'qr/' . $_ . '/' },
        GlobRef   => sub { '*' . B::svref_2object($_)->NAME },
        Object    => sub { $_->can('to_string') ? $_->to_string : $_ },
        ScalarRef => sub { '\\' . ppprint( ${$_} ) },
        Num       => sub {$_},
        Str       => sub { '"' . $_ . '"' },
        Undef     => sub {'undef'},
        => sub { die "I don't know what $_ is" }
    );
}

Or a simple JSON serializer:

sub to_json {
    my $x = shift;
    match_on_type $x => (
        HashRef => sub {
            my $hash = shift;
            '{ '
                . (
                join ", " =>
                    map { '"' . $_ . '" : ' . to_json( $hash->{$_} ) }
                    sort keys %$hash
                ) . ' }';
        },
        ArrayRef => sub {
            my $array = shift;
            '[ ' . ( join ", " => map { to_json($_) } @$array ) . ' ]';
        },
        Num   => sub {$_},
        Str   => sub { '"' . $_ . '"' },
        Undef => sub {'null'},
        => sub { die "$_ is not acceptable json type" }
    );
}

The matcher is done by mapping a $type to an \&action. The $type can be either a string type or a Moose::Meta::TypeConstraint object, and \&action is a subroutine reference. This function will dispatch on the first match for $value. It is possible to have a catch-all by providing an additional subroutine reference as the final argument to match_on_type.

Type Coercion Constructors

You can define coercions for type constraints, which allow you to automatically transform values to something valid for the type constraint. If you ask your accessor to coerce, then Moose will run the type-coercion code first, followed by the type constraint check. This feature should be used carefully as it is very powerful and could easily take off a limb if you are not careful.

See the "SYNOPSIS" for an example of how to use these.

coerce 'Name' => from 'OtherName' => via { ... }

This defines a coercion from one type to another. The Name argument is the type you are coercing to.

To define multiple coercions, supply more sets of from/via pairs:

coerce 'Name' =>
  from 'OtherName' => via { ... },
  from 'ThirdName' => via { ... };
from 'OtherName'

This is just sugar for the type coercion construction syntax.

It takes a single type name (or type object), which is the type being coerced from.

via { ... }

This is just sugar for the type coercion construction syntax.

It takes a subroutine reference. This reference will be called with the value to be coerced in $_. It is expected to return a new value of the proper type for the coercion.

Creating and Finding Type Constraints

These are additional functions for creating and finding type constraints. Most of these functions are not available for importing. The ones that are importable as specified.

find_type_constraint($type_name)

This function can be used to locate the Moose::Meta::TypeConstraint object for a named type.

This function is importable.

register_type_constraint($type_object)

This function will register a Moose::Meta::TypeConstraint with the global type registry.

This function is importable.

normalize_type_constraint_name($type_constraint_name)

This method takes a type constraint name and returns the normalized form. This removes any whitespace in the string.

create_type_constraint_union($pipe_separated_types | @type_constraint_names)

This can take a union type specification like 'Int|ArrayRef[Int]', or a list of names. It returns a new Moose::Meta::TypeConstraint::Union object.

create_parameterized_type_constraint($type_name)

Given a $type_name in the form of 'BaseType[ContainerType]', this will create a new Moose::Meta::TypeConstraint::Parameterized object. The BaseType must exist already exist as a parameterizable type.

create_class_type_constraint($class, $options)

Given a class name this function will create a new Moose::Meta::TypeConstraint::Class object for that class name.

The $options is a hash reference that will be passed to the Moose::Meta::TypeConstraint::Class constructor (as a hash).

create_role_type_constraint($role, $options)

Given a role name this function will create a new Moose::Meta::TypeConstraint::Role object for that role name.

The $options is a hash reference that will be passed to the Moose::Meta::TypeConstraint::Role constructor (as a hash).

create_enum_type_constraint($name, $values)

Given a enum name this function will create a new Moose::Meta::TypeConstraint::Enum object for that enum name.

create_duck_type_constraint($name, $methods)

Given a duck type name this function will create a new Moose::Meta::TypeConstraint::DuckType object for that enum name.

find_or_parse_type_constraint($type_name)

Given a type name, this first attempts to find a matching constraint in the global registry.

If the type name is a union or parameterized type, it will create a new object of the appropriate, but if given a "regular" type that does not yet exist, it simply returns false.

When given a union or parameterized type, the member or base type must already exist.

If it creates a new union or parameterized type, it will add it to the global registry.

find_or_create_isa_type_constraint($type_name)
find_or_create_does_type_constraint($type_name)

These functions will first call find_or_parse_type_constraint. If that function does not return a type, a new type object will be created.

The isa variant will use create_class_type_constraint and the does variant will use create_role_type_constraint.

get_type_constraint_registry

Returns the Moose::Meta::TypeConstraint::Registry object which keeps track of all type constraints.

list_all_type_constraints

This will return a list of type constraint names in the global registry. You can then fetch the actual type object using find_type_constraint($type_name).

list_all_builtin_type_constraints

This will return a list of builtin type constraints, meaning those which are defined in this module. See the "Default Type Constraints" section for a complete list.

export_type_constraints_as_functions

This will export all the current type constraints as functions into the caller's namespace (Int(), Str(), etc). Right now, this is mostly used for testing, but it might prove useful to others.

get_all_parameterizable_types

This returns all the parameterizable types that have been registered, as a list of type objects.

add_parameterizable_type($type)

Adds $type to the list of parameterizable types

BUGS

See "BUGS" in Moose for details on reporting bugs.

AUTHOR

Stevan Little <stevan@iinteractive.com>

COPYRIGHT AND LICENSE

This software is copyright (c) 2011 by Infinity Interactive, Inc..

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.