NAME
SNMP::Info::Layer2::Aironet - SNMP Interface to Cisco Aironet devices running IOS.
AUTHOR
Max Baker
SYNOPSIS
# Let SNMP::Info determine the correct subclass for you. 
my $aironet = new SNMP::Info(
                         AutoSpecify => 1,
                         Debug       => 1,
                         DestHost    => 'myswitch',
                         Community   => 'public',
                         Version     => 2
                       ) 
   or die "Can't connect to DestHost.\n";
my $class      = $aironet->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";DESCRIPTION
Provides interface to SNMP Data available on newer Aironet devices running Cisco IOS.
Note there are two classes for Aironet devices :
- SNMP::Info::Layer3::Aironet
- 
This class is for devices running Aironet software (older) 
- SNMP::Info::Layer2::Aironet
- 
This class is for devices running Cisco IOS software (newer) 
For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.
my $aironet = new SNMP::Info::Layer2::Aironet(...);
Inherited Classes
- SNMP::Info::Layer2
- SNMP::Info::Entity
- SNMP::Info::EtherLike
- SNMP::Info::CiscoStats
- SNMP::Info::CiscoConfig
Required MIBs
GLOBALS
These are methods that return scalar value from SNMP
- $aironet->vendor()
- 
Returns 'cisco' 
- $aironet->description()
- 
System description. Adds info from method e_descr() from SNMP::Info::Entity 
Globals imported from SNMP::Info::Layer2
See documentation in "GLOBALS" in SNMP::Info::Layer2 for details.
Globals imported from SNMP::Info::Entity
See documentation in "GLOBALS" in SNMP::Info::Entity for details.
Globals imported from SNMP::Info::EtherLike
See documentation in "GLOBALS" in SNMP::Info::EtherLike for details.
TABLE METHODS
- $aironet->cd11_port()
- 
Returns radio interfaces. 
- $aironet->cd11_mac()
- 
Returns client radio interface MAC addresses. 
- $aironet->cd11_ssid()
- 
Returns radio interface ssid. 
- $aironet->dot11_cur_tx_pwr_mw()
- 
Current transmit power, in milliwatts, of the radio interface. 
Overrides
- $aironet->interfaces()
- 
Uses the i_description() field. 
- $aironet->i_mac()
- 
MAC address of the interface. Note this is just the MAC of the port, not anything connected to it. 
- $aironet->i_duplex()
- 
Crosses information from SNMP::Info::EtherLike to get duplex info for interfaces. 
- $aironet->bp_index()
- 
Returns reference to hash of bridge port table entries map back to interface identifier (iid) 
- $aironet->fw_mac()
- 
Returns reference to hash of forwarding table MAC Addresses 
- $aironet->fw_port()
- 
Returns reference to hash of forwarding table entries port interface identifier (iid) 
- $aironet->i_vlan()
- 
Returns a mapping between ifIndexand the PVID or default VLAN.
- $aironet->v_index()
- 
Returns VLAN IDs 
- $aironet->v_name()
- 
Returns VLAN names 
- $aironet->i_ssidlist()
- 
Returns a list of SSIDs associated with interfaces. This function is MBSSIDaware, so when usingMBSSIDcan map SSIDs to the sub-interface to which they belong.
- $aironet->i_ssidbcast()
- 
With the same keys as i_ssidlist, returns whether the given SSID is being broadcast. 
- $aironet->i_ssidmac()
- 
With the same keys as i_ssidlist, returns the Basic service set identification (BSSID), MAC address, the AP is using for the SSID. 
- $aironet ps1_status()
- 
Returns the PoE injector status based on cpoePdSupportedPowerandcpoePdSupportedPowerMode.
Table Methods imported from SNMP::Info::Layer2
See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.
Table Methods imported from SNMP::Info::Entity
See documentation in "TABLE METHODS" in SNMP::Info::Entity for details.
Table Methods imported from SNMP::Info::EtherLike
See documentation in "TABLE METHODS" in SNMP::Info::EtherLike for details.