/ 
SNMP-Info-3.61
River stage one • 1 direct dependent • 1 total dependent
/ SNMP::Info::Layer3::C3550

NAME

SNMP::Info::Layer3::C3550 - SNMP Interface to Cisco Catalyst 3550 Layer 2/3 Switches running IOS

AUTHOR

Max Baker

SYNOPSIS

# Let SNMP::Info determine the correct subclass for you. 
my $c3550 = new SNMP::Info(
                       AutoSpecify => 1,
                       Debug       => 1,
                       # These arguments are passed directly to SNMP::Session
                       DestHost    => 'myswitch',
                       Community   => 'public',
                       Version     => 2
                       ) 
   or die "Can't connect to DestHost.\n";

my $class      = $c3550->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

Abstraction subclass for Cisco Catalyst 3550 Layer 2/3 Switches.

These devices run IOS but have some of the same characteristics as the Catalyst WS-C family (5xxx,6xxx). For example, forwarding tables are held in VLANs, and extended interface information is gleaned from CISCO-SWITCH-MIB.

For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.

my $c3550 = new SNMP::Info::Layer3::C3550(...);

Inherited Classes

SNMP::Info::CiscoStack
SNMP::Info::Layer3::CiscoSwitch

Required MIBs

Inherited Classes' MIBs

See "Required MIBs" in SNMP::Info::CiscoStack for its own MIB requirements.

See "Required MIBs" in SNMP::Info::Layer3::CiscoSwitch for its own MIB requirements.

GLOBALS

These are methods that return scalar value from SNMP

$c3550->vendor()

Returns 'cisco'

$c3550->model()

Will take the translated model number and try to format it better.

355048 -> 3550-48
355012G -> 3550-12G
$c3550->ports()

Tries to cull the number of ports from the model number.

Globals imported from SNMP::Info::CiscoStack

See documentation in "GLOBALS" in SNMP::Info::CiscoStack for details.

Globals imported from SNMP::Info::Layer3::CiscoSwitch

See documentation in "GLOBALS" in SNMP::Info::Layer3::CiscoSwitch for details.

TABLE METHODS

These are methods that return tables of information in the form of a reference to a hash.

Overrides

$c3550->i_duplex()

Returns reference to hash of iid to current link duplex setting.

Software version 12.1(22)EA1a or greater returns duplex based upon the result of $c3550->el_duplex(). Otherwise it uses the result of the call to CiscoStack::i_duplex().

See SNMP::Info::Etherlike for el_duplex() method and SNMP::Info::CiscoStack for its i_duplex() method.

$c3550->i_duplex_admin()

Returns reference to hash of iid to administrative duplex setting.

Software version 12.1(22)EA1a or greater returns duplex based upon the result of $c3550->p_duplex(). Otherwise it uses the result of the call to CiscoStack::i_duplex().

See SNMP::Info::CiscoStack for its i_duplex() and p_duplex() methods.

$c3550->set_i_duplex_admin(duplex, ifIndex)

Sets port duplex, must be supplied with duplex and port ifIndex.

Speed choices are 'auto', 'half', 'full'.

Crosses $c3550->p_port() with $c3550->p_duplex() to utilize port ifIndex.

Example:
my %if_map = reverse %{$c3550->interfaces()};
$c3550->set_i_duplex_admin('auto', $if_map{'FastEthernet0/1'}) 
    or die "Couldn't change port duplex. ",$c3550->error(1);

Table Methods imported from SNMP::Info::CiscoStack

See documentation in "TABLE METHODS" in SNMP::Info::CiscoStack for details.

Table Methods imported from SNMP::Info::Layer3::CiscoSwitch

See documentation in "TABLE METHODS" in SNMP::Info::Layer3::CiscoSwitch for details.