NAME

Sim::OPTS is a morphing and optimization program that manages parametric explorations by propagation of constraints through the ESP-r building performance simulation platform and performs multiobjective optimization by overlapping block coordinate descent.

SYNOPSIS

use Sim::OPTS;
opts;

DESCRIPTION

Sim::OPTS morphs models by propagation of constraints through the ESP-r building performance simulation platform and performs multiobjective optimization by overlapping block coordinate descent.

A working knowledge of ESP-r is necessary to use OPTS. Information about ESP-r can be found at http://www.esru.strath.ac.uk/Programs/ESP-r.htm.

To install OPTS, the command <cpanm Sim::OPTS> has to be issued. Perl will take care to install all dependencies. OPTS can be loaded through the command <use Sim::OPTS> in Perl. For that purpose, the "Devel::REPL" module may be used. As an alternative, the batch file "opt" (which can be found in the "example" folder in this distribution) may be copied in a work directory. In that case, to launch the program the command <opt> may be issued. That command will activate the OPTS functions, following the settings specified in a previously prepared configuration file. When launched, OPTS will ask the path to that file. Its activity will start after receiving that information.

The OPTS configuration file have to contain a suitable description of the operations to be accomplished. A great deal of instructions which are necessary to run OPTS will usually be specified in that file, which has to point to an existing ESP-r model. In this distribution there is a template file with explanations and an example of OPTS configuration file.

To run OPTS without making it act on files, the setting <$exeonfiles = "n";> should be specified in the configuration file. By setting the variable "$toshell" to the chosen path, the path for the text file that will receive the commands in place of the shell should be specified.

OPTS will give instruction to ESP-r via shell to make it modify the building model in different copies. Then, if asked, it will run simulations, retrieve the results, extract some information from them and order it as requested.

Besides an OPTS configuration file, also configuration files for propagation of constraints may be created. This will give to the morphing operations much greater flexibility. Propagation of constraints can regard the geometry of a model, solar shadings, mass/flow network, and/or controls; and also, how those pieces of information affect each other and daylighting (calculated through the Radiance lighting simulation program). To get some hints about what propagation on constraints can be used for in the program, an example file included in this distribution may be studied.

The ESP-r model folders and the result files that will be created in a parametric search will be named as the root model, followed by a "_" character, followed by a variable number referred to the first morphing phase, followed by a "-" character, followed by an iteration number for the variable in question, and so on for all morphing phases. For example, the model instance produced in the first iteration for a root model named "model" in a search constituted by 3 morphing phases and 5 iteration steps each will be named "model_1-1_2-1_3-1"; and the last one "model_1-5_2-5_3-5".

To describe a block search, the most important variables to be taken into account in a configuration file are "@varn" - which represents the sequence of design variables - and "@casegroup" - which represent the sequence of decompositions to be taken into account. After joining "@varn" with two copies of itself, OPTS will work in the middle of the so-obtained sequence. How "@varn" and "@casegroup" should be specified is more quickly described with a couple of examples.

1) If brute force optimization is sought for a case composed by 4 parameters, the following settings should be specified: <@varn = (1, 2, 3, 4);> and <@casegroup = ( [ [4, 4] ] ) ;>.

b) If a block search is sought on the basis of 3 parameters, with 2 overlapping active blocks composed by 2 parameters each having the leftmost parameters in position 3 and 4 of the mentioned joined list, the following settings should be specified: <@varn = ( [ [1, 2, 3] ] );> and <@casegroup = ( [ [3, 2], [4, 2] ] );>.

OPTS is a program I have written as a side project since 2008 with no funding. It was the first real program I attempted to write. From time to time I add some parts to it. The parts of it that have been written earlier are the ones that are coded in the strangest manner.

EXPORT

"opts".

SEE ALSO

The available documentation is mostly collected in the readme.txt file. An example of instruction for propagation of constraints in OPTS are uploaded in my page at the Politecnico di Milano (www.polimi.it). Its web address may vary, so I don't list it here. But it may be googled.

AUTHOR

Gian Luca Brunetti, <gianluca.brunetti@polimi.it>

COPYRIGHT AND LICENSE

Copyright (C) 2008-2014 by Gian Luca Brunetti and Politecnico di Milano. This is free software. You can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2 or later.