NAME
Net::Packet::IGMPv4 - Internet Group Management Protocol v4 layer 4 object
SYNOPSIS
use Net::Packet::Consts qw(:igmpv4);
require Net::Packet::IGMPv4;
# Build a layer
my $layer = Net::Packet::IGMPv4->new(
version => 2,
type => NP_IGMPv4_v2_TYPE_QUERY,
maxRespTime => 10,
checksum => 0,
groupAddress => NP_IGMPv4_GROUP_ADDRESS_ALL_HOSTS,
);
$layer->pack;
print 'RAW: '.unpack('H*', $layer->raw)."\n";
# Read a raw layer
my $layer = Net::Packet::IGMPv4->new(raw => $raw);
print $layer->print."\n";
print 'PAYLOAD: '.unpack('H*', $layer->payload)."\n"
if $layer->payload;DESCRIPTION
This modules implements the encoding and decoding of the Internet Group Management Protocol v4 (version 1 and 2) layer.
RFC for version 1: ftp://ftp.rfc-editor.org/in-notes/rfc1112.txt
RFC for version 2: ftp://ftp.rfc-editor.org/in-notes/rfc2236.txt
See also Net::Packet::Layer and Net::Packet::Layer4 for other attributes and methods.
ATTRIBUTES
- version - 4 bits (or 0 for version 2)
- type - 4 bits (or 8 bits for version 2)
- unused - 8 bits (or 0 for version 2)
- maxRespTime - 8 bits (or 0 for version 1)
- checksum - 16 bits
- groupAddress - 32 bits
-
For version 1, you use the following attributes: version, type, unused, checksum, groupAddress.
For version 2, you use the following attributes: type, maxRespTime, checksum, groupAddress.
METHODS
- new
-
Object constructor. You can pass attributes that will overwrite default ones. Default values:
version: 2
type: NP_IGMPv4_v2_TYPE_QUERY
maxRespTime: 10
checksum: 0
groupAddress: NP_IGMPv4_GROUP_ADDRESS_ALL_HOSTS
- pack
-
Packs all attributes into a raw format, in order to inject to network. Returns 1 on success, undef otherwise.
- unpack
-
Unpacks raw data from network and stores attributes into the object. Returns 1 on success, undef otherwise.
CONSTANTS
Load them: use Net::Packet::Consts qw(:igmpv4);
- NP_IGMPv4_HDR_LEN
-
IGMPv4 header length.
- NP_IGMPv4_v1_TYPE_QUERY
- NP_IGMPv4_v1_TYPE_REPORT
-
Various types supported by version 1 of the protocol.
- NP_IGMPv4_v2_TYPE_QUERY
- NP_IGMPv4_v2_TYPE_QUERY_v1
- NP_IGMPv4_v2_TYPE_REPORT
- NP_IGMPv4_v2_TYPE_LEAVE_GROUP
-
Various types supported by version 2 of the protocol.
- NP_IGMPv4_GROUP_ADDRESS_NO_HOSTS
- NP_IGMPv4_GROUP_ADDRESS_ALL_HOSTS
- NP_IGMPv4_GROUP_ADDRESS_ALL_ROUTERS
-
Various group addresses supported by all versions of the protocol.
AUTHOR
Patrice <GomoR> Auffret
COPYRIGHT AND LICENSE
Copyright (c) 2004-2006, Patrice <GomoR> Auffret
You may distribute this module under the terms of the Artistic license. See LICENSE.Artistic file in the source distribution archive.