NAME

Embperl::Form::Validate - Form validation with server- and client-side support.

DESCRIPTION

This modules is developed to do form validation for you. It works on the server side by checking the posted form data and it generates client side script functions, to validate the form values, as far as possible, before they are send to the server, to avoid another server roundtrip.

Also it has the best support for Embperl, it should also work outside of Embperl e.g. with CGI.pm or mod_perl.

It can be extended by new validation rules for additional syntaxes (e.g. US zip codes, German Postleitzahlen, number plates, iso-3166 2-digit language or country codes, etc.)

Each module has the ability to rely it's answer on parameters like e.g. the browser, which caused the request for or submitted the form.

The module fully supports internationalisation. Any message can be provided in multiple languages and it makes use of Embperl's multilanguage support.

SYNOPSIS

use Embperl::Form::Validate;

my $epf = new Embperl::Form::Validate($rules, $form_id);

$epf->add_rule('fnord', $fnord_rules);

# validate the form values and returns error information, if any
my $result = $epf -> validate ;

# Does the form content validate?
print 'Validate: ' . ($result?'no':'yes');

# validate the form values and reaturn all error messages, if any
my $errors = $epf->validate_messages($fdat, $pref);

# Get the code for a client-side form validation according to the
# rules given to new:
$epf -> get_script_code ;

METHODS

The following methods are available:

$epf = Embperl::Form::Validate -> new ($rules [, $form_id ], [$default_language]);

Constructor for a new form validator. Returns a reference to a Embperl::Form::Validate object.

$rules: should be a reference to an array of rules, see "RULES" elsewhere in this document for details.
$form_id: should be the name (im HTML) or id (in XHTML) parameter of the form tag, which has to be verified.It\'s e.g. used for generating the right path in the JavaScript DOM. It defaults to 'forms[0]' which should be the first form in your page.
$default_language: language to use when no messages are available in the desired language. Defaults to 'en'.

$epf->add_rules($field, $field_rules);

Adds rules $field_rules for a (new) field $field to the validator, e.g.

$epf->add_rule([ -key => 'fnord', -type => 'Number', -max => 1.3, -name => 'Fnord' ]);

The new rule will be appended to the end of the list of rules.

See "RULES" elsewhere in this document.

$epf -> validate ([$fdat, [$pref]]);

Does the server-side form validation.

$fdat: should be a hash reference to all postend form values. It defaults to %fdat of the current Embperl page.
$pref: can contain addtional information for the validation process. At the moment the keys language and default_language are recognized. language defaults to the language set by Embperl. default_language defaults to the one given with new.

The method verifies the content $fdat according to the rules given to the Embperl::Form::Validate constructor and added by the add_rule() method and returns an array refernce to error informations. If there is no error it returns undef. Each element of the returned array contains a hash with the following keys:

key: key into $fdat which caused the error
id: message id
typeobj: object reference to the Validate object which was used to validate the field
name: human readable name, if any. Maybe a hash with multiple languages.
msg: field specific messages, if any. Maybe a hash with multiple languages.
param: array with parameters which should subsituted inside the message

$epf -> error_message ($err, [ $pref ])

Converts one item returned by validate into a error message

$err: Item returned by validate
$pref: Preferences (see validate)

$epf -> validate_messages ($fdat, [ $pref ])

Validate the form content and returns the error messages as array ref if any. See validate for details.

$epf -> get_script_code ([$pref])

Returns the script code necessary to do the client-side validation. Put the result between <SCRIPT> and </SCRIPT> tags inside your page. It will contain a function that is named epform_validate_<name_of_your_form> where <name_of_your_form> is replaced by the form named you have passed to new. You should call this function in the onSubmit of your form. Example:

<script>
[+ do { local $escmode = 0 ; $epf -> get_script_code } +]
</script>

<form name="foo" action="POST" onSubmit="return epform_validate_foo()">
    ....
</form>

DATA STRUCTURES

The functions and methods expect the named data structures as follows:

RULES

The $rules array contains a list of tests to perform. Alls the given tests are process sequenzially. You can group tests together, so when one test fails the remaining tests of the same group are not processed and the processing continues in the next outer group with the next test.

[
  [
  -key        => 'lang',
  -name       => 'Language'
  required    => 1,
  length_max  => 5,
  ],
  [
  -key        => 'from',
  -type       => 'EMail',
  emptyok     => 1,
  ],

  -key        => ['foo', 'bar']
  required    => 1,
]

All items starting with a dash are control elements, while all items without a dash are tests to perform.

-key

gives the key in the passed form data hash which should be tested. -key is normaly the name given in the HTML name attribute within a form field. -key can also be a arrayref, in which case only one of the given keys must statisfy the following test to succeed.

-name

is a human readable name that should be used in error messages. Can be hash with multiple languages, e.g.

-name => { 'en' => 'date', 'de' => 'Datum' }

-type

specfify to not use the standard tests, but the ones for a special type. For example there is a type Number which will replaces all the comparsions by numeric ones instead of string comparisions. You may add your own types by writing a module that contains the necessary test and dropping it under Embperl::Form::Validate::<Typename>. The -type directive also can verfiy that the given data has a valid format for the type.

The following types are available:

Default: This one is used when no type is specified. It contains all the standart tests.
Number: Input must be a floating point number.
Integer: Input must be a integer number.
TimeHHMM: Input must be the time in the format hh::mm
TimeHHMMSS: Input must be the time in the format hh::mm:ss
EMail: Input must be a valid email address including a top level domain e.g. user@example.com
EMailRFC: Input must be a valid email adress, no top level domain is required, so user@foo is also valid.
IPAddr: Input must be an ip-address in the form nnn.nnn.nnn.nnn
IPAddr_Mask: Input must be an ip-address and network mask in the form nnn.nnn.nnn.nnn/mm
FQDN_IPAddr: Input must be an ip-address or an fqdn (host.domain)

If you write your own type package, make sure to send them back, so they can be part of the next distribution.

-msg

Used to give messages which should be used when the test fails. This message overrides the standart messages provided by Embperl::Form::Validate and by Embperls message management. Can also be a hash with messages for multiple languages. The -msg parameter must preceed the test for which it should be displayed. You can have multiple different messages for different tests, e.g.

       [
	-key        => 'email',
	-name       => 'E-Mail-Address',
	emptyok     => 1,                   # it's ok to leave this field empty (in this case the following tests are skiped)

	-msg => 'The E-Mail-Address is invalid.',
	matches_regex => '(^[^ <>()@¡-ÿ]+@[^ <>()@¡-ÿ]+\.[a-zA-Z]{2,3}$)', 
	
	-msg => 'The E-Mail address must contain a "@".',
	must_contain_one_of => '@',

	-msg => 'The E-Mail address must contain at least one period.',
	must_contain_one_of => '.',

	-msg => 'The E-Mail-Address is invalid. It must only not contain any special charaters.',
	must_not_contain => '¡¢£¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ',
       ],

-fail

stops further validation of any rule after the first error is found

-cont

continues validation in the same group, also a error was found

-break => 1

errors only break current block, but does not display any message. -break => 0 turns bak to normal behaviour. This can be used for preconditions:

[
-key => 'action',  emptyok => 1, -break => 1, ne => 0, -break => 0,
-key => 'input', 'required' => 1
]

The above example will only require the field "input", when the field "action" is not empty and is not zero.

[arrayref]

you can place a arrayref with tests at any point in the rules list. The array will be considered as a group and the default is the stop processing of a group as soon as the first error is found and continue with processing with the next rule in the next outer group.

The following test are currently defined:

required

emptyok

length_min

length_max

length_eq

eq

same

Value must be the same as in field given as argument. This is usefull if you want for example verify that two passwords are the same. The Text displayed to the user for the second field maybe added to the argument separeted by a colon. Example:

$epf = Embperl::Form::Validate -> new (
      [
          -key => 'pass',  -name => 'Password', required => 1, length_min => 4,
          -key => 'pass2', -name => 'Repeat Password', required => 1, length_min => 4,
                           same => 'pass:Password',
      ],
      'passform') ;

ne

lt

gt

le

ge

matches_regex

Value must match Perl regular expression. Only executed on server side.

matches_regex_js

Value must match JavaScript regular expression. Only executed on client side. IMPORTANT: If the user has disabled JavaScript in his browser this test will be never executed. Use a corresponding Perl Regex with matches_regex to get a server side validation. Use this with care, because different browser may have different support for regular expressions.

not_matches_regex

Value must not match Perl regular expression. Only executed on server side.

not_matches_regex_js

Value must not match JavaScript regular expression. Only executed on client side. IMPORTANT: If the user has disabled JavaScript in his browser this test will be never executed. Use a corresponding Perl Regex with not_matches_regex to get a server side validation. Use this with care, because different browser may have different support for regular expressions.

matches_wildcard

must_only_contain

must_not_contain

must_contain_one_of

PREFERENCES

The $pref hash (reference) contains information about a single form request or submission, e.g. the browser version, which made the request or submission and the language in which the error messages should be returned. See also validate

ERROR CODES

For a descriptions of the error codes, validate is returning see validate

FDAT

Example

This example simply validates the form input when you hit submit. If your input is correct, the form is redisplay with your input, otherwise the error message is shown. If you turn off JavaScript the validation is still done one the server-side. Any validation for which no JavaScript validation is defined (like regex matches), only the server-side validation is performed.

<html>
<head>
[-

use Embperl::Form::Validate ;

$epf = Embperl::Form::Validate -> new (
    [
        [
        -key => 'name',
        -name => 'Name',
        required => 1,
        length_min => 4,
        ],
        [
        -key => 'id',
        -name => 'Id',
        -type => 'Number',
        gt   => 0,
        lt   => 10,
        ],
        [
        -key => 'email',
        -msg => 'This is not a valid E-Mail address',
        must_contain_one_of => '@.',
        matches_regex => '..+@..+\\...+',
        length_min => 8,
        ],
        [
        -key => 'msg',
        -name => 'Message',
        emptyok => 1,
        length_min => 10,
        ]
    ]) ;

if ($fdat{check})
    {
    $errors = $epf -> validate_messages ;
    }

-]
<script>
[+ do { local $escmode = 0 ; $epf -> get_script_code } +]
</script>
</head>
<body>

<h1>Embperl Example - Input Form Validation</h1>

[$if @$errors $]
    <h3>Please correct the following errors</h3>
    [$foreach $e (@$errors)$]
        <font color="red">[+ $e +]</font><br>
    [$endforeach$]
[$else$]
    <h3>Please enter your data</h3>
[$endif$]

<form action="formvalidation.htm" method="GET" onSubmit="return epform_validate_forms_0_()">
  <table>
    <tr><td><b>Name</b></td> <td><input type="text" name="name"></td></tr>
    <tr><td><b>Id (1-9)</b></td> <td><input type="text" name="id"></td></tr>
    <tr><td><b>E-Mail</b></td> <td><input type="text" name="email"></td></tr>
    <tr><td><b>Message</b></td> <td><input type="text" name="msg"></td></tr>
    <tr><td colspan=2><input type="submit" name="check" value="send"></td></tr>
  </table>
</form>


<p><hr>

<small>Embperl (c) 1997-2004 G.Richter / ecos gmbh <a href="http://www.ecos.de">www.ecos.de</a></small>

</body>
</html>

AUTHOR

Axel Beckert (abe@ecos.de) Gerald Richter (richter@dev.ecos.de)

1 POD Error

The following errors were encountered while parsing the POD:

Around line 791:: Non-ASCII character seen before =encoding in '<>()@¡-ÿ]+@[^'. Assuming CP1252

To install Embperl, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Embperl

CPAN shell

perl -MCPAN -e shell
install Embperl

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)