3.0.0 24. Nov 2023
- Final 3.0.0 version, no changes since 3.0.0-rc.2
3.0.0-rc.2 7. Oct 2023
- Add missing test files to MANIFEST
- Documentation updates
3.0.0-rc.1 3. Oct 2023
- Apply debian patches
(https://sources.debian.org/patches/libembperl-perl/2.5.0-17/).
Thanks to the Debian Perl Group, especially Dominic Hargreaves,
Florian Schlichting and Axel Beckert
- Apply patches for fedora
(https://rt.cpan.org/Public/Bug/Display.html?id=148621 and
https://rt.cpan.org/Public/Bug/Display.html?id=148702)
Thanks to Marcus Doemling
- Fixed compilation/Makefile of/for libxml2 and libxslt
- Fixed warnings about undefined values in log. Note this
is done by goning back to the old behaviour, were
using uninitialized values were not a warning. So if
you like to have warnings about uninitialized values
add [* use warnings "uninitialized" *] to your code.
- Add a lot of enhancements to Embperl::Form
2.5.0 16. March 2014
- Do not clear old code before compiling a Embperl page
in Perl >= 5.14.x because it causes seg faults. This
leads to "subroutine redifined" warings, when a
page was changed and is reloaded.
- Corrected use of G_KEEPERR when calling eval, because
of changed meaning, which cause the message "Compiling
error" instead of the real error message.
- Adapted tests to Perl 5.14 & 5.16
- Fixed a refcounting problem cause message "Attempt to
free unreferenced scalar" during mod_perl startup
with Perl 5.14.x
- Fix some dependencies on hash order inside the parser
which causes Embperl to fail with Perl >= 5.18 because
of hash randomisation.
- Changed the way exit passed through internaly, so it
works with Perl >= 5.18
- Adapted tests to Perl 5.18
- Adapted test httpd.conf to Apache 2.4. Embperl fully supports
Apache 2.4
- Makefile.PL now uses apache2 or httpd2 as Apache binary
- Makefile.PL now autodetects if mpm needs to loaded as
module for tests.
- Fix output inside of Registry script for mod_perl 2.0.4+
- Fix problem with error output on stderr for Windows 64Bit
- removed support for XALAN XML parser. It was outdated
anyway. libxml2 is still supported.
- Fixed a C type declaration which caused RTF files to not
correctly escaped with newer GCC's.
- Embperl::Form is totally overhauled with many new features.
It uses now jQuery as javascript library, instead
of prototype. NOTE: This is an incompatible change. If
you are using Embperl::Form before, you need to
adapt your html code!
- Fix some Unicode issues in Embperl::Form::Validate
- Embperl::Form::Validate is now able to highlight input
fields with wrong input
- Applied the following debian patches: delay.patch,
fix-string-typo.patch, fix-pod-errors.patch, fix-whatis.patch,
new_process_group.patch, fix-pod-unescaped-unicode.patch,
german.patch and utf8.patch which mainly corrects
spelling and typo errors. NOTE: modperl.patch and
Makefile.PL.patch are not applied, because they are
debian specific. Thanks to Florian Schlichting for
providing uptodate information about the patches
and adaptions for Embperl 2.5.
- Applied further spell corrections from Florian Schlichting.
- Log Errors form Embperl::Syntax::Mail to error log
- Fix compile problem on non intel plattforms due to missing
-m32 flag.
- Added support for utf8 sourcefiles. By setting
input_charset => 'utf8' sponsored by Perlover.
- Added optChdirToSource = 0x10000000 which will cause
Embperl to change to the directory of the source file
prior to execution.
Adaptions to Perl 5.14/16 were sponsored by NUREG GmbH
2.4.0 4. Oct 2010
- Support for CGI.pm 3.43 (included within Perl 5.10.1)
for file uplaods. CGI.pm < 2.43 is not supported anymore.
- A lot of enhancements for Embperl::Form
- Add example for usage of Embperl::Form. See
eg/forms/README.txt. Can be viewed used using "make start"
- Increased size limit for errormessage from 1024 to 4096
- Makefile.PL can now handle compiling 32Bit code on 64Bit
sytsem if Perl was compiled as 32Bit application
- Adaption of tests to changed error messages of perl 5.10
- Makefile.PL can now cope with OpenSuSE 11.2, if perl,
mod_perl and apache are installed from OpenSuSE packages.
- Fix make test error for Perl compiled with DEBUGGING on
- Support for internationalization in Emberl::Form
- Do not link against unused libz
- Supports now Perl 5.12: Cope with changed flags G_ARRAY
and G_SCALAR, SVt_RV is now SVt_IV
- Fix Execute parameter app_name (was appname, but app_name
is correct, appname is still accepted, but might not always
work)
- Add parameter checks for Execute parameters to avoid segfaults
in case of non refs where refs are expected.
- Add more controls to Embperl::Form
2.3.0 30. Sept. 2007
- Added support for Code ref in language message lookup hash.
That allows for internationalization to call a sub instead
of only looking up keys in a hash.
- Added UTF-8 messages to Embperl::Form::Validate.
- Include patch from Mark D. Anderson to make SSI syntax
behave more like mod_include.
- Make component -> curr_esc_mode available in Perl, requested
by Robert.
- Improve XHTML/XML support. Tags that are parsed by Embperl
like input, are now only have one slash at the end, if there
is already a slash in the source and output_mode is set to
xml. In addition checked attributes for input tags are now
added as checked="checked" to be valid xml.
Spotted by Villu Roogna.
- A lot of code was written for Embperl::Form a sophisticated
form creation/handling framework, which also contains some
nice AJAX and JS stuff like autocomplete input boxes,
grids and tabbed dialogs. Also the framework itself is ready
to use, there is not much documentation yet...
- Fixed wrong version numbers in make test files,
which caused make test to fail. Spotted by Matt Bockol.
- Use _stat() instead of stat() on Win32 to work around the problem
that Perl redefines stat() in an incompatibel way.
Spotted by Randy Korbes.
- Documented all options of embpexec.pl.
- Fixed default_language handling in Embperl::Form::Validate.
Patch from Kathryn Andersen.
- In Makefile.PL check for mod_perl2.pm instead of mod_perl
when mod_perl 2.x is used. Spotted by Dan Clawson.
- Included patch from Andrew O'Brian to correctly retrieve
Cookie header when running under Apache 2.
- Fixed timezone compiletime error on Mac OS-X. Patch from
Wolfgang Kinkeldei.
- Fixed segfault that might occur when an value of an input
attribute is removed. Spotted by Andrew Sitnikov.
- Fixed missing Perl Stack setup which causes memory errors on
BSD systems. Patch from Doug Rayner.
- Added internal check and error message when, due to a syntax
error in the source, a node is parsed as attribute.
Spotted by Kato M. Yoshiro.
- Fix segfault that occured during output of an error message
when not inside an Embperl request.
2.2.0 8. Apr. 2006
- Added new command [$ dump $] which can be used
to dump variables to logfiles or to the output
for debugging purpose.
- [$ sub $] return value is handled now corretly
in scalar and array context
- Added support for Apache 2.2
- Added Table of Content pod file, which lists
all available Embperl documentation, to get
a better overview. Thanks to Axel Beckert.
- Additional checked and notchecked Validationrules
- Fixed Cookie expire calculation, because
relative exipre times where only calculated
once at server startup. Spotted by Derrick Spell.
- Fixed parsing of Cache configuration functions in
httpd.conf. Spotted by Carl Eklof.
- Added better handling of Out Of Memory condition,
i.e. log error end try to clean up instead of
segfault.
- Fixed segfault that could occur because a non
string value is passed as string index, which
crashed if such a string index doesn't exists.
Spotted by Carl Eklof.
2.1.0 15. Nov 2005
- Added better UTF-8 support:
- Output escaping now takes Perl's UTF-8 flags into
account and will not escape UTF-8 chars anymore
- Diretive Embperl_Output_Esc_Charset allows to
generaly switch between Latin1, Latin2 and UTF-8.
(For UTF-8 this is not necessary when Perl's UTF-8
Flag is correctly set, but this is not the case
for all datasources)
- Form data that is send to Embperl and put into %fdat
get now Perl's internal UTF8 flags set, in case
the data posted contains a valid UTF8 string.
This can be disabled with the option
optFormDataNoUtf8.
- Added Module Embperl::Inline, which allows to embed
Embperl code in an ordinary Perl module. This makes
is easy to install system wide libraries, which need
to contain Embperl code/markup. See perldoc Embperl::Inline
- [$ sub $] now can takes arguments and inital code like:
[$ sub foo ($self, $a, $b) my $c = $self -> {bar} $]
- Embperl subroutines are now called in array context, to
allow to return multiple return values.
- Added validate type TimeValue, which is a numeric value
followed by s, m, h, d or w.
- Added validate type PosInteger, which is a positiv integer
value
- Added Support for calling Embperl::Object::Execute inside
an Embperl page. (Allow to nest new requests)
- Corrected HTML/XML escaping inside from <textarea> tags.
- Fixed Segfault that could occur when a Embperl sub does
not contain anything.
- Fixed compile problem with timezone on BSD systems
- Fixed URLs in website to work correctly on static mirrors
- Embperl development has been moved from CVS to SVN.
See L<"SVN.pod"|SVN.pod> .
2.0.1 3. October 2005
- Turn off Apache maintainer mode symbols, so it works with SuSE Apache
- Integrated KWiki into Embperl website (available under eg/web)
- Don't croak if Apache request record is not available (e.g. during startup)
- Fixed wrong setup of $epreq -> param -> filename, when a Embperl offline
processing is made inside an Embperl page. Reported by Gavin Carr.
- Return correct http status codes 403 and 404 if access to a file is
forbidden or the file was not found. Reported by Cliff Rayman.
- Added Date header for Embperl::Mail, Suggested by Robert.
2.0.0 14. August 2005
- http headers from %http_headers_out will now also be send when the
init method of an application object return non zero (e.g. 302 for redirect).
- Updated xsl stylesheet and css styles of website for better display
of code sections.
- Updated db/epwebapp.pl to make it more robust and fix some minor bugs
and also allows to set edit and view_level (anonymous, login, admin)
for every table.
2.0rc5 7. August 2005
- Added attribute content-type to mail:send tag (Syntax Mail).
Patch from Axel Beckert.
- Added preloadfiles parameter to %initparam, which allows to
preload files in the parent process, when running under mod_perl.
See perldoc Config.pod for details.
- Fixed unresolved symbol when compiling under SuSE 9.3 (because SuSE
compiles Apache 2 in maintainer mode)
- Fixed strange output when Perl code inside of [$ sub $] returns
before any output.
- Fixed mail:send tag (Syntax Mail), so that Perl code inside the tag
for example to set an attribute, is now executed correctly.
- Fixed incorrect quoting of single quotes inside of <textarea> values,
reported by Axel Beckert.
- Fixed a potential segfault in cache handling. Patch from Yatin Chawathe.
- Documentation cleanup
- Added test for optKeepSpaces.
- Added test for application object in Execute tests.
- Make sure Embperl is listed after Apache itself in the server signature.
2.0rc4 19. Juni 2005
- Adapted to new mod_perl namespace. Embperl now works correctly
with mod_perl version >= 2.0rc5 (older version are still supported)
NOTE: For file uploads to work you also need to upgrade CGI.pm
- Fixed problem with Execute when GlobalRequestRec option is not
set in mod_perl config.
- use gmtime_r instead of gmtime for time calculation to be thread safe
2.0rc3 14. March 2005
- Handle warnings the same way under Embperl and Embperl::Object, so they
are in both cases log to embperl.log and the Apache error log and show
up on the error page. Reported by Dirk Melchers.
- Report line number and file name in unstructures jump error messages.
Requested by Michael Smith.
- Fixed sigsegv under solaris cause by NULL point in debug output.
- Applied patches from Angus Lees to make Embperl compile and test on
64Bit machines and avoid some compiler warnings.
- Add pod for embpmsgid.pl from Angus Lees.
- Fix [= =] with included spaces in embpmsgid.pl. Reported by Robert.
- Make undef values for translation hashs treat as the same as
non exists. Requested by Robert.
- Let embpmsgid.pl parse out language tags of gettext, sort output
and don't convert chars > 128 to octal values. Requested by Robert.
- Fixed make test module load problem for mod_perl tests, when
mod_perl is staticly linked into Apache
- Documentation updates and cleanup
- Output an error message when an Embperl sub is called and no
Embperl request is active.
- Do not use method call to output in send_error_page to avoid
trouble with overloaded output function.
- Fixed segfault which occured sometimes randomly after compile
of Embperl page source.
- Reimplemented SetupSession, CleanupSession and SetSessionCookie
which can be used to access Embperl session data from outside,
for example from mod_perl Authentication handler.
- Fixed problem with undefined $req_rec when Embperl::Execute
is called from a registry script. Reported by Martin Moss.
- If an object is passed to die inside Execute the errors array
will receive this object and will not be stringified.
Requested by Robert Noris.
- $epreq -> errobj holds the last object passed to die during
the request.
- Added documentaion of Embperl's error handling and trapping.
- If optReturnError is set in the httpd.conf it is now reseted
for all sub components, to make sure all errors are reported
back. (It can still be set via the options argument of
Execute).
- Using ErrorDocument by setting optReturnError now also works
under EmbperlObject. Reported by Robert Noris.
- Fixed problem when calling Embperl sub via Execute inside a
file that is called via Execute. Reported by Michael Smith.
- Fixed segfault when requesting symbol tables informations
via Apache::Status, reported by Dan Wilga.
- Find apr.h if it is not in same directory as httpd.h in
Makefile.PL. (Necessary for RedHat)
2.0rc2 21. November 2004
- Flush output to client and send final chuck, before cleanup runs.
- Fix compiler error when compiling with Perl 5.005.
- Fix html input tag value set, when %fdat value is 0. Reported
by Torsten Luettgert.
- Fix test, for Apache 1.3 with static mod_perl and other dynamic
modules, by loading Embperl first. Reported by Christophe Le Bars.
- Fix FastCGI read of POST data, reported by Doug Rayner.
- Readded tests for CGI mode.
2.0rc1 24. August 2004
- Addeded configuration directive Embperl_Object_Reqpath, which allows to
search serveral directories for the file of the initial request.
- Added $epreq -> param -> cgi method to access the CGI.pm object. CGI.pm
object is only available in case of a file upload
- Fixed make test problem on RedHat, which reported wrong number of errors
due to escaping in Apache error log.
- Fixed test and compile problems on Windows with Perl 5.8.3
- Added more verbose error informations for PerlHash error
- Fixed problem when unloading Embperl.so under Apache, which cause
Perl Hash error and/or segfault.
- Fixed SegFault that occured when a Perl warning should be logged during
initialisation.
- Added single quotes arround xslt paramenters that are automaticly
generated from %fdat to avoid security problems.
- Fixed some memory leaks
- Fixed problem that checkboxes or options or not correctly selected
on the second request when value was html escaped
- Fixed Segfault under Apache 1.3 when doing a syntax check
- use Apache::ServerRec when mod_perl version is 1.99_15 or above.
Spotted by Aare Vesi.
- Fixed endless loop on 64Bit Alpha and ia64.
- Fixed make test problem on Windows.
2.0b11 15. March 2004
- Fixed problem with JavaScript code in Form::Validate, when fields names
are non JavaScript Identifier.
- Fixed endless loop with call sub inside table under some circumstances,
reported by Neil Gunton.
- Fixed problem with select and dynamic options when no name attribute is
given in select tag. Reported by Michael Stepanov.
- Fixed problem with nesting of dynamic table and dynamic select.
Reported by Doug Rayner.
- Fixed problem with CGI.pm 3.01+, which deletes uploaded files, when
CGI object is destroyed.
- Fixed problem with encrypted source files and Perl 5.8.3 IO layers.
Reported by Edwin Ramirez.
- Fixed problem with encrypted source files and set key length.
Reported by Edwin Ramirez.
- Fixed problem with <a />, <form /> and <option /> in xml output mode.
Reported by Jochen Topf.
- Fixed problem with relativ cookie expires time.
Patch from Torsten Luettgert.
- Fixed problem with <a> tag without href attribute when session ids
are embedded into the url. Reported by Torsten Luettgert.
- Added sanity checks to epcrypto.c
- Added posibility to pass fdat&ffld parameter to
Embperl::Object::Execute.
- Fixed problem with print OUT and call of subroutines as first statement
of a subroutine. Reported by various people.
2.0b10 23. Jan 2004
- Added -break parameter for haveing precondition to
Embperl::Form::Validate
- Added $epreq and $epapp for the request and application object, so
$r = shift isn't needed anymore on every page.
- Default for EMBPERL_DEBUG is now zero, which mean, that Embperl does
not write anymore to /tmp/embperl.log unless requested. Suggested by
Angus Lees and others.
- Added Embperl_Top_Include configuratin directive, which allows to add
Perl code to the top of every file, for example for doing a use Module.
- fixed various compiler warnings reported by Angus Lees.
- Added missing Form/Validate modules to distribution.
- fixed missing $req_rec in base template call from Embperl::Object.
Reported by Neil Gunton.
- Fixed include path for non standart apr directories.
- Fixed epchar.c.min and epchar.c.iso-latin-2 to conatin char2xml table
- Fixed problem with mod_perl 1.99_12 which reports wrong return value from
handler when some variable inside them Embperl page get tainted.
- Fixed tests for Perl 5.8.2 & 5.8.3
- Fixed a bug with print OUT at the end of a nested tag inside a loop reported
by Neil Gunton
- Documented exit with argument behaviour.
- Remved use Apache::Constats from Embperl::Mail so it works without mod_perl
installed.
2.0b9 10. Juni 2003
- libxml now searchs through Embperl search path when includeing external entities,
so for example <xsl:include> directives searchs files the same way as Execute
does under Embperl::Object.
- fixed typo in JavaScript code for Form::Validate reported by Axel Beckert
- fixed typo in Embperl::Mail reported by Axel Beckert.
- fixed small bugs in Embperl::Form::Validate test code reported by Axel Beckert.
- charcters 128-160 are now escaped in URLs to avoid problems with Mozilla.
- fixed missing escaping of '/' in Embperl::Form::Validate JS routines.
Patch from Axel Beckert.
- fixed spelling: CACKE_KEY -> CACHE_KEY. Reported by Andre Landwehr.
- URL escaping now fully conforms to RFC 2396. This mainly solves some problems
where IE interpreted characters in URLs as UTF8.
- Embperl::Form::Validate JavaScript code can now handle fieldnames that
aren't correct JavaScript identifier.
- Fix SIGSEGV when printing to Embperl::LOG before Embperl log file is setup.
- Fix problem when session id is given to Embperl, but session management
was not setup
- Added 'same' validation to check if two fileds have the same input enterd
- Fixed memory leak. Patch from Joshua Chamas.
- Use MP_AP_PREFIX as source for APache 2. Patch from Paul Dyer.
- Fixed a initialisation bug which caused under special conditions a segfault
when compiling a select tag.
- Fixed compiler warnings and errors when compiling with Perl 5.8.0.
- Replaced PL_sv_undef with ep_sv_undef (which is a copy of PL_sv_undef),
because storing PL_sv_undef in a Perl 5.8.0 hash is treated as a placeholder
and doesn't work as before.
- Fixed problem with [$ sub $] when running under Perl 5.8.0.
- Fixed problem when STDOUT is tied, because storage has changed in Perl 5.8.0.
- Fixed problem when single quote or backslash is inside of option or input value.
Bug reported by Saadiq Rodgers-King.
- Added [$last$], [$next$], [$redo$] and documented [* next *] etc.
- Readdeded missing MailFormTo and added test for it.
- Fixed escaping inside of html attributes of Embperl generated tags like input
and [$ hidden $]. Reported by Axel Beckert.
- checked and selected attributes are now correctly set when values contains
entities (e.g. <)
- Fixed segfault when cleanup is called to early. Reported by Neil Gunton.
- If no name is given for a key, Form::Validate now tries to lookup the correct
text via Embperl's gettext method.
- Fixed problem with message ids that are Perl keywords. Reported by Jaak.
- Added EMBPERL_COOKIE_SECURE option to transfer cookie only over a secure
connection.
- Added EMBPERL_OUTPUT_MODE that allows to change to XML output, which cause
generated tags to contains a closing slash, so they are valid XML/XHTML.
- Fixed make test to ignore different idention of newer versions of
libxslt.
- Added server_addr to the request param object.
- Keep spaces and newlines in <mail:send> tag.
- Embperl::Mail now encodes all header fields that contains characters between
128 and 255. Use headerencoding parameter to turn of or tell Embperl your charset.
- Fixed mod_perl 2 detection when mod_perl is build with MP_INST_APACHE2.
- Fixed problem with reseting $escmode, when using print OUT. Reported by
David Hull.
- Fixed compiling problem on FreeBSD.
- Added function XML::Embperl::DOM::iSetText to change name of Tag.
Requested by Yatin Chawathe.
- EMBPERL_COOKIE_EXPIRES now again accepts relatives times like +2h.
- embpexec.pl now correctly takes config values from environment
for application object.
- Added -type => Integer, IPAddr, IPAddr_Net, FQDN_IPAddr, TimeHHMM, TimeHHMMSS,
EMail and EMailRFC to Embperl::Form::Validate.
- Fixed problem with [$var$] and select reported by Joshua Spoerri.
- Embperl compiles and tests now correctly if mod_perl installed
under Apache2 namespace.
- Added tests for epform and subreq.
- Added patch from David Hull, which let you specify the status-code
when doing a redirect via %http_headers_out.
- Fix SIGSEGV on sparc in cleanup. Patch from Angus Lees.
- Apply patch from Angus Lees which avoids a lot of (harmless) compiler
warnings.
- %idat is now also populated for checkboxes and radiobuttons where no matching
value in %fdat is found. This avoid duplicate submission of formdata
when using [$ hidden $].
- fixed memory allocation problem that had occured when mod_perl was
staticly linked into Apache.
- removed old Embperl 1 test files from distribution
- corrected initialization of ap_filter_rec structure which had lead to random
segfaults when using the subreq parameter.
2.0b8 (BETA) 25. Juni 2002
- exit can now exit the whole request. When called without argument
it exits the current component, like before, when called with argument
it exits the whole request.
- Added support for Apache 2.0 / mod_perl 2.0 (prefork MPM).
- Added the possibility to catch the output of a sub-request
(e.g. a CGI script, Java or PHP output) when running under Apache 2.0
- when setting $r -> param -> filename in an application object
to a relativ path it is interpreted relativ to original request
- Start to catch up with new features of Embperl 2 in the docs. Added
Config.pod for configuration and calling.
- Lots of improvments in the new Embperl website, which serves as best
example for using the new Embperl 2 features. It's part of the distribution
and can be found under eg/web. See eg/web/README.
- fixed bug with setting of escmode and print Out reported by
Eric-Olivier Le Bigot.
- fixed incorrected escaping inside of an URL when expanding an hash
or array reference. Reported by Axel Beckert.
- fixed possible endless loop when expanding hash or array inside of
an URL.
- fixed a segfault that occured when source file encryption was enabled.
Reported by Edwin Ramirez.
- fixed a segfault that occured when no input file is given. Reported by
Edwin Ramirez.
- fixed a segfault that occured on solaris when input comes from memory.
Reported by Mike Wesemann.
- readd possibility to build version with and without Apache support
on windows.
- Remove Content-Length: 0 HTTP-Header in CGI Mode
- Fixed segfault when replacing an attribute. Reported by Michael Stevens.
- Fixed random segfaults, that had occured when Perl had reallocated it's
internal Stack.
- When apache is started with -D EMBPERL_APDEBUG, it outputs a
configuration trace.
- When file is not found, Embperl::Object now returns status 404, instead
of 500. Reported by Cameron McBride.
- When optReturnError is set, Embperl::Object now really returns the error code.
Reported by Cameron McBride.
- Fixed a reference count error when using the import parameter. Reported
by Michael Smith.
- Fixed string reference counting problem in RTF&POD syntax.
- Fixed a segfault that had occured when a file with a syntax error is
compiled the second time within the same process. Reported by
Michael Smith.
- removed do { } around expressions of [+ +] blocks inside urls, because
this cost performance and now all [+ +] behaves the same. Reported by
Michael Smith.
- make stop now works also on windows.
- make start, which can be used to view/test the Embperl website localy,
now displays the URL how to request the site.
- libxslt does correct error reporting now.
- libxslt output encoding is now recognized correctly.
- set Content-Length when sending error page, so Internet Explorer won't show
his own error page.
2.0b7 (BETA) 21. Mar. 2002
- Changed default for EMBPERL_ESCMODE from 3 to 7. This disables
by default the possibilty use the backslash to not escape a piece
of output. This increases the security, because it by default
avoids the interpretation of the backslash in any user input that
is redisplayed.
- Fixed bug in mail syntax and Embperl::Mail reported by Jan Kyncl.
- Removed LogFormat and CustsomLog from test config, so mod_log_config
is not required for make test. Reported by Jochen Topf.
- Removed EmbperlObject.pm from MANIFEST, since it was replaced by
Embperl/Object.pm.
- Make symbolsnames unique so they don't clash with 1.3.4. Reported
by Kee Hinckley.
- Fixed a problem that ocurred when a reference to some of the Embperl
objects was kept after the end of it's lifetime, which caused a
segfault.
- Don't do a path search when the filename starts with './'.
- Fixed a segfault that occured when many nested sub's are used,
but only a low number of strings.
- Fixed a problem that <option> tags are not correctly selected, when
the <option> tag was inside a loop and the name of the <select>
tag was dynamicly generated.
- Added test for config directives inside of VirtualHost
2.0b6 (BETA) 13. Mar. 2002
- Embperl have move from the namespace HTML::Embperl to Embperl.
This is because Embperl is no longer only a HTML framework,
but is suitable for other formats like XML too. Also this allows
to install Embperl 1.x and 2.x on the same machine without
conflicts, to make a smooth upgrade.
- Rewrote Embperl internal data structures. The Embperl request
structure is now splitted into thread, application, request
and component structure.
- Moved nearly all of the per request/component initialization code
from Perl to C. Together with the optimized data structures, this
speeds up request/component initialization, which is especialy a
performance improvement for pages that do a lot calls to
Execute (up to 50% for small includes).
- All members of these structures now available form Perl
which avoids using mod_perl Apache object and enviroment
variables in most cases, makeing the resulting pages more
independend from the environment they run under. On the other
side this gives quite a few new possibilities to influence
what Embperl is doing, especialy together with Embperl::Object.
- Introduced new application object which holds together a set
of pages and allows to configure the Embperl logfile and session
handling different for each application.
- Added Embperl::Object application object, which is invoked during
request initialization. Any application code can now go there.
This allows a proper separation of Code and Design and building of
MVC (Model, Controller, View), 2-Tier and 3-Tier applications
with Embperl.
- Added EMBPERL_APP_HANDLER_CLASS to set the application object
for Embperl pages, when not using Embperl::Object
- Embperl now uses nativ Apache configuration directives instead
of enviroment variables when running under mod_perl. You need to
load Embperl before you can use any of them, either via
"PerlModule Embperl" or via "use Embperl" inside of a startup script.
"Embperl_UseEnv on" is provided to get the old behaviour of using
environment variables for configuration.
- The default for input unescaping is now set to off. So people which are
working with an text editor should be happy, people who are using any
sort of HTML editor should use EMBPERL_INPUT_ESCMODE to set the way
Embperl interprets the input.
- Added new configuration directives EMBPERL_INPUT_ESCMODE which controls
the unescaping of the input. This superseds the old optRawInput and
allows a more differentiated control.
- Added form data validation. Embperl is now capable to do server-side
and client-side validation of form input. You just have to define
a set of rules and Embperl generates the correct JavaScript code and
does the validation when the form data is posted to the server. By
writing or overriding class, the validatior could be extented.
See Embperl::Form::Validate for details.
- Added [= foo =] block and $r -> gettext method for page localization.
When the page is executed the 'foo' is replaced with a localizied
message for the current language.
- Added methods r -> messages and r -> default_messages to define
current message set for current language during application init.
- Added embpmsgid.pl utility to extrcat message ids from Embperl pages
and put them in a Data::Dumper or dbm file.
- Simplified the definition of the recipe structure. This allows much
more intuitiv definition of a new recipe.
- A recipe struture can now also be passed directly to the Execute
function as parameter.
- The get_recipe function now can be overriden by a custom application
object.
- Enhanced POD parser. Now generates a similar output as pod2xml,
which is better suitable for XSLT processing. Also the POD
parser now can pasers POD out of other Embperl files.
- Fixed problem with parameter passing to xslt processors, which
were always ignored on the first request.
- Renamed configuration directive EMBPERL_FILESMATCH to
EMBPERL_URIMATCH to better describe what it is doing.
- exit works now outside of [$ sub $]
- New configuration directive EMBPERL_SESSION_MODE allows
to configure to pass session inside of the QUERY_STRING
- Embperl doesn't add's a \r\n at the end of textfiles
anymore.
- Moved send_error_page and mail_errors into Embperl::App, so they can
be overridden by a custom application object.
- Added configuration directives EMBPERL_MAIL_ERRORS_LIMIT,
EMBPERL_MAIL_ERRORS_RESET_TIME and EMBPERL_MAIL_ERRORS_RESEND_TIME
to limit the number of errors send in a small time.
- When running under Embperl::Object all sourcefiles including for
example xsl stylesheets are now search throught the searchpath.
- Fixed a bug that causes input fields and textarea field to not
autofilled anymore after a sub was called. Reported by Kee Hinckley.
2.0b5 (BETA) 27. Nov. 2001
- Add xsltparam parameter which takes a hashref and is used to
pass parameters to the xslt processor. If not given defaults
to %fdat.
- Add require URI::URL to test.pl so make test work with newer LWP.
Patch from Jonathan Stowe.
- Fixed problem in registry/tied test, which failed for some Apache
versions because of addtional http header. Patch from Jonathan Stowe.
- Fixed problem with comments inside [! !] blocks. Reported by
Alan Milligan.
- Fixed compiling problem with very recent versions of libxslt.
Reported by Michael Stevens and Jonathan Stowe.
- Fixed make test so it skips session tests if Apache::SessionX isn't
installed. Reported by from Jonathan Stowe.
- Fixed path problem with Execute ({sub => foo,... }) on win32.
- Fixed a problem with duplicate subroutine names when running
multiple pages in the same package.
- Fixed problem with reloading when file changed, which sometimes
didn't reload correctly in 2.0b4
- Fixed memory leak which occured when using libxslt.
- Fixed MakeMaker problem with Perl 5.7.1.
- Removed some uninitialized value warnings.
- Added "make start" and "make stop" to start and stop test httpd
2.0b4 (BETA) 20. Nov. 2001
- Enhancements for RTF syntax, allowing no IF fields and passes
thru any unkown fields.
- Fixed problem when loading syntax. Spotted by Michael Stevens.
- Allow Perl code inside of HTML attributes in ASP syntax, together with
EmbperlHTML syntax. Spotted by Ivan G. Shevchenko.
- Added POD syntax, which converts POD to XML, which can transformed to
any other output format using XSLT.
- Enhanced Makefile.PL to support plugins for linking of extra libraries.
- Added support for libxslt
- Added support for Xalan-C XSLT
- Added the concept of recipes which allows to dynamicly tell Embperl
how to process a request. A recipe is basicly a tree structure
with put different providers together. Every provider can act
upon the output of the preceeding providers. See README.v2
and perldoc HTML::Embperl::Recipe for more details.
- Added new configuration directive EMBPERL_RECIPE/Execute parameter
recipe, which tells Embperl how a file should be processed.
- Added recipes for XSLT transformation.
- Rebuild cache management to work together with recipes. Now every
intermediate step could be cached.
- Add new debug flags dbgOutput, dbgRun, dbgCache, dbgCompile, dbgXML,
dbgXSLT, dbgCheckpoint, dbgDOM to have a more fine control what's
going into the log file
- Changes in Embperl's internal tree representation, to fix serveral
small problems and in preparation for proper XML handling.
- print OUT inside loop works now correctly
- Added new escmode 8/15 which generates correct XML escaping.
- $row_foo will no longer treated as $row. Bug reported by Dave Fischer.
- Add patch from Wim Kerkhoff so SSI syntax works together with
EmbperlObject, i.e. included files are searched in the same way as
normal Embperl files.
- Add new method AddTagInside in HTML::Embperl::Syntax::HTML to allow
tags inside of other tags.
2.0b3 (BETA) 9. July 2001
- correct package handling in EP1COMPAT mode
- compiles now with sun-cc. Patches from Michael Stevens.
- fixed several bugs that caused weired behaviour with nested subs
and tables.
- fixed a bug that caused Embperl to stop when it sees a checkbox
inside a loop, for which no value is in %fdat.
- fixed a bug that caused Embperl alias a value in %fdat and %idat
- Execute work now also on the very first line of a file. Spotted
by Michael Smith.
- [- -] can now contain Perl comments. Spotted by Michael Stevens.
- [- -] can now start with =pod. Spotted by Jonny Cavell.
- fixed a parser error so <[+ $foo +]> generates the correct result.
Spotted by Michael Stevens.
- fixed bug in Node_insertAfter which may cause a single Execute
on the second line of a file to loop endless. Spotted by
Janny Cavell.
- Embperl doesn't search for attributes inside of quotes inside of
html tags anymore. Spotted by Ian Van der Poel.
- type=checkbox|radio is now case insensitiv as it should. Spotted
by Jonny Cavell.
- print OUT and Execute now works together. Spotted by Jonny Cavell.
- Embperl doesn't insert a linefeed after an Execute anymore.
- Embperl now keeps single or double quote the same as in the source
file. Requested by Jonny Cavell.
- [$hidden$] works now correctly inside of loops. Spotted by Jonny Cavell.
- The parser now checks for the correct end of an html tag. Spotted
by Jonny Cavell.
- Added RTF syntax. This allows you for example to create serial letters
with your favorite word processing program, save them as RTF and process
them with Embperl. See HTML::Embperl::Syntax::RTF for docs.
2.0b2 (BETA) 29. Mar 2001
- Embperl files can now debugged via the interavtive debugger.
The debugger shows the Embperl page source along with the
correct linenumbers.
This works in various ways:
# perl interacive command line debugger
perl -d embpexec.pl file.epl
# ddd graphical debugger (https://www.gnu.org/software/ddd/)
ddd --debugger 'perl -d embpexec.pl file.epl'
or via Apache::DB under mod_perl
- Embperl has now a defined API for creating/adding a new
syntax. See perldoc HTML::Embperl::Syntax for details.
- Which syntax (also multiple at the same time)
a given page uses can be defined via EMBPERL_SYNTAX configuration
directive.
- Added Syntax definitions for SSI, Perl and plain Text
- New [$ syntax $] metacommand can switch the syntax of the file
on the fly. It's also usefull to load addtional taglibs.
- print OUT works again
- HTML comments are not touched anymore
- Embperl doesn't log a warning if a undefined value is in %ENV and
dbgEnv is on.
- 2.0b2 now contains all contains all changes up to 1.3.2 .
2.0b1 (BETA) 22. Dec 2000
- Syntax of Embperl is now defined in module HTML::Embperl::Syntax
- Processing of Embperl is now divided in smaller steps:
1 reading the source
2 parseing
3 compiling
4 executing
5 outputing
Since steps 1-3 has only to take place for the first time a file
is processed, Embperl is about 50-100% faster the Embperl 1.x.
(Embperl 1.x has also precompiled the Perl code, but Embperl
goes much further and stores also a precompiled structure of
the document)
This modularisation will also allow to replace single steps
with other modules and to cascade multiple processors, that
work on one document.
- The following options can currently only set from the httpd.conf:
optRawInput, optKeepSpaces
- The following options are currently not supported:
optDisableHtmlScan, optDisableTableScan,
optDisableInputScan, optDisableMetaScan
- Nesting must be properly. I.e. you cannot put a <table> tag (for an
dynamic table) inside an if and the </table> inside another if.
(That still works for static tables)
- optUndefToEmptyValue is always set and cannot be disabled.
- [$ foreach $x (@x) $] requires now the bracket around the
array (like Perl)
- [* *] blocks works now as expected.
- option tag can take value optional from html text, so
<option value="foo"> and <option>foo</option> are the same
- Execute ('file.htm#subname') works now without a previous
import
- Added cacheing of output. There are serveral parameters that
controls the caching. They can be either given as configuration
directives in httpd.conf, as parameters to Execute or as
Perl vars/subs inside a [! !] of the page itself.
- [+ +] blocks must now contain a valid Perl expression. Embperl 1.x
allows you to put multiple statements into such a block. For performance
reasons this is not possible anymore. Also the expression must _not_
terminated with a semikolon. To let old code work, just wrap it into a do
e.g. [+ do { my $a = $b + 5 ; $a } +]
1.3.4 (RELEASE) 5. Dec 2001
- Added method $r -> Espace for html & url escaping
- URL escpage # to %23
- use Content-Length HTTP Header instead of $ENV{CONTENT_LENGTH}
when running under mod_perl and win32. This fixes a bug
with POSTed data reported by Lukas Zapletal.
- Display correct Apache module name in Makefile.PL when
requesting path for Apache module. Patch from James Lee.
- New session handling using Apache::SessionX. (This also
fixes problem with MD5 and Perl 5.6.1)
- Fixed a bug that cause file-uploads to fail for the first
request to a file when running under EmbperlObject. Reported
by Thoren Johne.
- Added possibilities to add the session id as argument to any URL,
instead of using cookies.
- Added new hash %sdat which holds temporary sessins data.
- Added options optAddUserSessionToLinks, optAddStatusSessionToLinks
and optNoSessionCookies to control how the session id is passed.
- Make sure the HTML::Embperl::Mail generates correct line endings
- If Perl's STDOUT and/or STDIN are tied to any package, Embperl now
calls the Perl methods PRINT and READ for doing I/O. This currently
only works when not running under mod_perl.
- Embperl can now run under FastCGI. Use embpfastcgi.pl instead of
embpcgi.pl.
- Delete unnecessary PerlFixupHandler from httpd.conf.src for make test.
Reported by David Merberg.
- Add undef to %idat for select tag with nothing selected if
optAllFormdata is set.
- Cleanup of DBIx::Recordset objects now honors the setting in %CLEANUP.
Problem reported by Kee Hinckley.
- Embperl can now use encrypted sourcefiles. See crypto/README for
details.
- Embperl can now be installed as Apache and non Apache version on the
same system. This is neccessary to work on Windows in- and outside of
Apache.
- Fixed a linkage problem with symbol embperl_module, first reported
by GustavKristoffer Ek.
- error message now always contain a filename.
- Added optShowBacktrace to enable backtrace of filename in error messages
- Removed obsolete debug flags dbgDisableCache, dbgWatchScalar,
dbgEarlyHttpHeader
- Fixed problem with changing to page directory on win32. Reported by
Hans de Groot.
- Fixed problems with mod_perl environement handling with ActiveState Perl
on win32.
1.3.3 (RELEASE) 6. Juni 2001
- fixes problem with cleanup and Perl 5.6.0+ which broke
session management. Spotted by Lukas Zapletal and Andy Lim.
- Improved Makefile.PL to catche more setup situation on
Win 32.
- Make $r -> Error settable to be able to reset Embperl's
internal error flag.
- workaround for $r -> chdir_file not working correctly inside
of Apache::Registry with ActiveState Perl, which caused
make test to fail.
- fixed SIGSEGVs that could occur on rare situations when
multiple file not found errors are reported.
- fixed problem with wrong setup of Content-Length header
when running in CGI mode, with escmode = 0. Spotted by
Edwin Ramirez.
- fixed problem with nested dynamic tables and Execute.
- added correct errror message for rcNotCompiledForModPerl.
Spotted by Scott Chapman.
1.3.2 (RELEASE) 16 May. 2001
- Emulate the syntax => Text parameter of Embperl 2.0, which allows
to include pure text files any without interpretation. Requested
by Kee Hinckley.
- Fixed problem with corrupted @ISA, that had occured when a page was
first requested without EmbperlObject and then with EmbperlObject.
- Catch exceptions inside of Embperl.pm and correctly cleanup the
request. This avoids problems in further request in case anything
was really going wrong.
- If the base template in an EmbperlObject request is requested
directly the Execute ('*') does nothing, to avoid
endless recursion.
- Fixed bug in SetSessionCookie which had called undefined method
getinitalid. Spotted by Sun Choi.
- Removed wrong expire setting from SetSessionCookie, spotted
by Michael Stevens.
- Additions to IntroEmbperlObject.pod by Neil Gunton.
- ';' is now accepcted as separator for query strings addtionaly
to the '&' character. Patch from Brent A. Ellingson.
- ';' is now escaped to %3B when outputed inside a URL.
- Embperl is now added to the Serversoftware identification when
preloaded under mod_perl.
- adapted make test to Perl 5.6.1 and 5.7.1 so now it passes sucessfully.
- fixed problem with cleanup in threaded Perl 5.6.1 and higher
- added pod documentation to embperl.pl. Patch from Angus Lees.
- %http_headers_out can take now array refs as elements to set multiple
headers of the same value. Patch from Maxwell Krohn.
- Non module-documenations (like Intro.pod Faq.pod etc) now gets copied under
the correct directory and man pages are generated with the correct name
(e.g. perldoc HTML::Embperl::Intro works now after installation). Based
on an idea from Angus Lees.
- Makefile.PL enhancements for Apache/ActiveState binary distribution
- quote pathnames in Makefile to allow directories like "Program Files".
Spotted by Lukas Zapletal.
- Added epocgi.pl which allow use of EmbperlObject as CGI script.
- Added a dTHR to function CmdVar to make Embperl compile with threaded
Perl 5.005. Patch from Michael George III.
- EMBPERL_SESSION_ARGS can now accept pathes with spaces inside by quoteing
an argument e.g. PerlSetEnv EMBPERL_SESSION_ARGS "'Directory=/Session Files/'".
Spotted by Lukas Zapletal.
- Perl search path (@INC) in make test is set to abosulte paths to be independend
of directory changes that Apache might issue. Spotted by Randy Korbes.
1.3.1 (RELEASE) 13 Feb. 2001
- Added new Introduction to EmbperlObject written by
Neil Gunton. See perldoc IntroEmbperlObject
- Added new Tips and Tricks pod written by
Neil Gunton. See perldoc TipsAndTricks. Anybody is invited
to send me their own Tips and Tricks!
- Added object and isa parameters to Execute, which allows to get an
object reference for a certain file and set the Perl inherence
hierachive. Ideas from Neil Gunton and Angus Lees.
- Corrected a problem that leads to very strange errors when an
Embperl sub is called from an in memory source (that is passed
via the Execute input parameter). Spotted by Neil Gunton.
- Make EmbperlObject work better with relative paths and drive letters
on Windows. Based on a patch from Freddy Vulto.
- Fixed a problem with the cache key, which could cause that the same
file is compiled within different packages.
- Fixed a problem that Embperl are in a wired state after an file upload
has been interrupted. Spotted by Dirk Lutzebaeck.
- Fixed a problem set @ISA is not correctly setup in case a file is
compiled in the same package as the base file of EmbperlObject.
Spotted by Neil Gunton.
- Fixed problem with including ../foo.html in EmbperlObject. Spotted
by Neil Gunton.
- Added warning if @ISA is not correctly setup/corrupted.
- Fixed a SIGSEGV that occurs when an reference to undef is returned
from a [+ +] inside a URL.
- Added warning to Makefile.PL, if File::Spec 0.82 isn't installed, which is
required by EmbperlObject.
- Fixed "use of undefined value" warning in make test
1.3.0 (RELEASE) 4 Dec. 2000
- Corrected a wrong test, that let make test fail. Spotted by Eddie Lau.
- Added a Line Feed at the end of epnames.h, which has caused some problems
with on old SunOS compiler. Spotted by Roman Maeder.
- Fixed a problem that Perl generated an error when $req_rec and [$ var $] was
used. Spotted by Michael Stevens.
1.3b7 (BETA) 15. Nov 2000
- Fixed problem that the call to close triggers error in Session.pm when using
Store::File. Spotted by Alvar Freude.
- Fixed problem that GetSession doesn't return a value for new session.
Spotted by Angus Lees.
- Added new function SetSessionCookie, which can be used to set the session cookie
header in case you use Embperl session management, but don't use a
Embperl page in that request. Suggested by Alex Schmelkin.
- Fixed problem that DeleteSession does not work outside the base template, when
used with EmbperlObject. Spotted by Angus Lees.
- Fixed problem when use multiple nested ../foo.htm inside EmbperlObject.
Spotted by Neil Gunton.
- Included patch from Angus Lees to ease building on debian.
- make test now works again with BEN-SSL httpsd. With help from Neil Gunton.
- Included grammaticaly updated Embperl.pod. Many thanks to Ilia Lobsanov
for doing the proof reading.
- removed dbgDisableCache to avoid problems with this "feature" that isn't working
anymore for a long time.
- Added validaten for session cookie. If Apache::Session 1.53+ is installed
it uses the validate method from Apache::Session::Generate::xxx. If a invalid
session id is found a new one is generated. Spotted by Angus Lees.
- If a not existing session id is received, Embperl generates now a new one.
- Enhancements of Cookie resending logic. To make sure cookies are send when
neccessary, but not more often. (Handles now write to session data, after
a delete in the same request correctly).
- Added more tests for Sessionhandling.
- Fixed a bug that Content-Lenght was 2 to much, when escmode was set to zero.
Spotted by Michael Smith.
- Added patches from Randy Korbes for ActiveState Support. Most tests with
Embperl under mod_perl nows passes. The few remaining ones that doesn't pass
seems to be due to problems of mod_perl's enironment handling.
- Droped support for Apache::Session 0.17. Embperl now support only
Apache::Session 1.00 and higher.
- Added new option: optDisableSelectScan, to allow processing of SELECT tags,
while processing of TABLE tags is disabled. Suggested by Robert.
- Carridge Returns are only removed for Perl 5.004. This makes using of
HERE documents possible on Perl 5.005+, even if the documents has CRLF
as lineendings.
1.3b6 (BETA) 18. Oct 2000
- Embperl now runs on ActiveState Perl. (At least in offline mode,
mod_perl mode seems to still have some problems). With a lot of help
from Randy Korbes.
- Changed EmbperlObject search order:
* If EMBPERL_OBJECT_STOPDIR is set, this directory is taken as
the last directory in the normal search path, instead of the
directory where the base template (EMBPERL_OBJECT_BASE) is found.
* EMBPERL_OBJECT_ADDPATH is _always_ added to the search path
* Now Embperl also searches the path for files like
../foo.html, or bar/foo.html, which includes a relative path.
- ../* is now a shortcut for the requested file, but in the
parent directory (or upper depending on the search path)
- Added access to Embperl session handling for modules and
calling scripts (see SetupSession and GetSession)
- Embperl is now able to output binary data if EMBPERL_ESCMODE
and/or $escmode is zero. This also include that no CRLF is
added at the end of the file, if escmode is zero.
- Added method for deleting session data and cookie
- Added method for triggering resend of session cookie.
- Added Test for pnotes ('EMBPERL_ERRORS')
- Added hash %CLEANUPFILE. All variables defined into the files given
in this hash, are also cleanup at the end of the request.
Patch from Todd Eigenschink.
- Changed the way the C Requestobject is attached to the Perlobject,
so it should now also work on 64Bit Processor like Alpha.
Spotted by Andre Landwehr.
- Fixed a problem with importing files that contains foreach and
do until loops, which may caused a syntax error or endless
loop. Spotted by Steffen Geschke.
- embpcgi* and embpexec* are now geratated out of *.templ instead
of editied in place to avoid problems with cvs conflicts
and lower/uppercase on Win32. Suggest by Jens-Uwe Mager.
- make test works with Apache that has mod_jserv compiled in
- Embperl now cache same files with relative path, which are located
in different directories correctly.
1.3b5 (BETA) 20. Aug 2000
- Embperl now supports Apache::Session 1.52. See "Session handling"
in the docs, how the setup has changed.
- Fixed a problem with POSTed data, which had got lost for the first,
request when using EmbperlObject handler. Spotted by
Kaare Rasmussen.
- Fixed a typo in HTML::Embperl::Mail, spotted by Robert.
- changed require to use HTML::Embperl in EmbperlObject to avoid problems
with dynamic loading. Spotted by Robert.
- Embperl takes the cookie for session handling from the Apache
request record to make it available in earlier phases then the
content handler. Suggested by Jack Cushman.
- added entity decoding for value attribute of radio/checkboxes.
Spotted by Chris Thorman.
- %fdat is not resetup when already done and formtype is
multipart/formdata. Spotted by Michael Slade.
- Embperl inserts & instead of a signle & inside query strings
when expaned from array or hash refs.
- Embperl now also accepts hashref inside a url and expand it
to a query_string i.e. <a href="foo.html?[+ { a=>1, b=>2 }+]"> will become
<a href="foo.html?a=1&b=>2">.
- EMBPERL_COOKIE_EXPIRES now also supports relativ times like:
+30s +10m +1h -1d +3M +10y
- $req_rec -> pnotes ('EMBPERL_ERRORS') could be used to retrieve
error message inside a error document
- make Embperl compile and run with threaded Perl 5.6. With help
from Jason Bodnar. NOTE: That doesn't mean that Embperl is
threadsafe!
1.3b4 (BETA) 17.07.2000
- New $escmode (or EMBPERL_ESCMODE) to disable the possiblilty
to turn off escaping with a leading backslash. Adding 4 to
any escmode will cause Embperl to do no special processing
on the backslash. This is mainly to avoid problems with
cross site scripting issuse, where people are able to enter
aribtary HTML. Spotted by Dirk Lutzebaeck.
- Characters between 128 and 159 are all HTML escaped now to
avoid problems with buggy browser, which were reported to
treat the chars 139 and 141 as < and >. Spotted by Dirk Lutzebaeck.
- If a requested file is not found when using EmbperlObject as handler,
the file given by C<EMBPERL_OBJECT_FALLBACK> is displayed instead.
If C<EMBPERL_OBJECT_FALLBACK> isn't set a staus 404, NOT_FOUND is
returned as usual.
- "perl Makefile.PL debug" will build debugging information for
gdb/ms-vc++ into Embperl library.
- test.pl can take a bunch of new options for debugging Embperl itself.
See make test TESTARGS="--help".
- Embperl 1.x and 2.x share now the same Makefile.PL and test.pl
- Added new debug flag dbgObjectSerach which logs the EmbperlObjects
work when searching the correct file.
- If import parameter is given to Execute, Perl code is compiled, but
only [! !] blocks are executed (to allow sub definitions on import)
- Space is converted to %20 instead of +, because that is more generic.
Suggested by Michael Blakely.
- EmbperlObject now automaticly defines all subs that are declared
inside the base template and inside the requested page, so it isn't
neccessary anymore to call Execute with import => 0 for them.
- Every Embperl Page now get passed a request object (which can be obtained
from $_[0]). The request object is a hash reference which is blessed
into the package HTML::Embperl::Req. Embperl itself don't uses the hash, so
you are free to populate it and pass data between different pages of one request.
- EmbperlObject now setup the inherence so that
request page -ISA->
base template -ISA->
EMBPERL_OBJECT_HANDLER_CLASS (if defined) -ISA->
HTML::Embperl::Req
and the Embperl request object is blessed into the packages of the
requested page, so you can do methods calls to subs that are defined
inside the requested page.
- correct spelling error and renamed ScanEnvironement to ScanEnvironment.
(ScanEnvironement still works).
- EmbperlObject can now be used also offline (via HTML::EmbperlObject::Execute)
- MailFormTo and HTML::Embperl::Mail::Execute now have a configuration
directive EMBPERL_MAILHELO, can be used to specify the host/domain for the
HELO/EHLO command. Suggested by Remco Brink.
- Fixed a bug that caused the default drive to be incorrectly set on Win 32.
1.3b3 (BETA) 25.04.2000
- Fixed SIGSEGV which occurs in cleanup with Perl 5.6. Spotted by
Aaron Johnson.
- Changed make test so it works correctly with new error messages of
Perl 5.6.
- Fixed a bug that Execute will always fail when $@ was set before.
Patch from Francis J. Lacoste.
- Changed test so it accpects charset in Content-Type header from
Apache 1.3.12
- The outputfile parameter now also works when running under
mod_perl. Spotted by Ilia Lobsanov.
- Makefile.PL warns if you build with a DSO mod_perl < 1.22
- make test checks that test files are readable by Apache.
- Applied a patch from Jens-Uwe Magner to make Embperl work
with mod_perl 1.22 on AIX. We now require mod_perl 1.22,
but I should now work as DSO and staticly linked.
- Applied a patch from Francis J. Lacoste that makes sure
that when a package name is given the file is always compiled
into this package. Note: This means that if you specify a
packagename and the packagename differs from request to
request, the page is compiled for every package and therfore
consuming memory on every request.
- Added EMBPERL_SESSION_HANDLER_CLASS which allows you to overwrite
Embperl defaults session handling. Idea form Barrie Slaymaker.
- Added EmbperlLogo.gif to the distribution, which contains
"Powered by Embperl".
- Added Patch from Randy Kobes that makes Embperl compile with
Apache 1.3.12 and Perl 5.6 on Win32.
- Removed some -w warnings form EmbperlObject
- Added tests for EmbperlObject
- Fixed a SIGSEGV that occured when Embperl found [*] inside
a page. Spotted by Barrie Slaymaker.
- Added epchar.c.min which contains translation tables which
let's all chars above 128 untouched. This is usefull for
processing two byte charsets. Patch from Sangmook Yi.
- The searchpath (EMBPERL_PATH) now uses semikolons (';') instead
of colons (':') to avoid problems with Windows drive letters.
Colons still work on Unix.
1.3b2 (BETA) 11. Feb 2000
- added new mod_perl handler EmbperlObject, which helps to build whole
pages out of small objects, which can be overwritten in "derived"
pages.
EmbperlObject allows you to define the standard layout of your site just
once and includes the neccessary components based on the uri. Your HTML
documents just have to contain the unique stuff and not the common stuff
like headers/footers or navigation bars. Also these common elements can
be overwritten in each subdirectory.
- added EMBPERL_PATH (and path parameter to Execute), which can contain
a colon separated search path. Embperl uses it when a file, which does
not contain a path, is executed.
- added new module HTML::Embperl::Mail which sends a file processed via
Embperl by email.
- Fixed a bug, that the logfile if opened also EMBPERL_DEBUG is set
to zero. Now if debug is zero, no logfile will be opened. Spotted
by Jason Bodnar and Christian Gilmore.
1.2.1 5. Jan 2000
- fdat parameter of Execute function isn´t honoured when
call from CGI script which has received multipart/formdata.
Spotted by NHan H. Trinh.
- @ffld was not correctly setup, when only fdat parameter is
given in calls to Execute.
- if mtime parameter is undef or 0, now the pcode really isn't
cached. Spotted by Neeme Vool.
- EMBPERL_OPTIONS and EMBPERL_DEBUG (debug, options) accepts
now decimal, binary, octal and hex values.
- fix a SIGSEGV that could occur under rare conditions in
cleanup. With help from Todd Eigenschink and Gary Shea.
- fix a problem that $req_rec is not correctly setup inside
imported subs. Reported by Cliff Rayman.
- specify domain/hostname when sending mail via MailFormTo
- add EMBPERL_MAILFROM config, to make sender used by
MailFormTo configurable
- add EMBPERL_MAILDEBUG config, to allow debugging of email
problems in MailFormTo
- ProxyInput now handles posted form data. Spotted by
Neeme Vool.
- EMBPERL_INPUT_FUNC now allows to also give the name
under which the source should cached, to allow correct
cacheing of data read via EMBPERL_INPUT_FUNC. Spotted by
Neeme Vool.
- Fixed a SIGSEGV in OPTION tag which occurs due to
different integer sizes on 64Bit systems. With help
from David Waldo.
1.2.0 17 Nov 1999
- test script had failed in cgi mode on win32. Spotted by
Randy Korbes.
1.2b11 (BETA) 4 Nov 1999
- Added the "Status:" header and error message to embpcgi.pl to
let Apache return the correct status line. Patch from Jason Holt.
- Fixed problem that Apache SIGSEGVs when an error message contains
a %x. Spotted by Ed Park.
- Added missing BEGIN block in docs for Session handling.
- Fixed an endless loop that occured when tainting is on and
the same document is called two times via Execute. With help
from Jason Holt.
- Changed access to addtional upload fileinfo. The old syntax
(${${$fdat{<name_of_field>}}}) isn't available anymore, because
it doesn't work with filenames that are not a vaild perl
variable name. Now there is a second field which start with a
dash that's holds a hash ref to the file info. Spotted by
Huang-Ming Pan.
- The Embperl specific part of Apache session (former
Apache::Session::Embperl) is now part of the Embperl distribution
(as HTML::Embperl::Session). This makes Embperl independ of
new releases of Apache::Session. Embperl now works with
Apache::Session version 1.00 and higher. Apache::Session 0.17 is still
supported, but the documentation is removed, because it should no
longer be used.
- Apache::Session must not be preloaded prior to Embperl. It's
enought to set EMBPERL_SESSION_CLASSES and Embperl will bring
the right modules in memory for you.
- Removed the call to mod_perl_sent_header, which was an workaround
for an problem with (very) old mod_perl version, because it doesn't
resolve on (every) IRIX. Spotted by Jearanai Vongsaard.
- NOT_FOUND, FORBIDDEN now also logged thru Apache, so the LogLevel is
honoured and log message in Apache error log get a time stamp.
Spotted by Christian Gilmore.
- Removed warings that apears when compiling with -Wall.
- Added URL of better emacs mode for Embperl from Erik Arneson.
- Added new paramter 'errors' to Execute function which takes an
array ref, that returns any error messages. Suggested by
James Elson.
- Fixed that serveral options where not settable inside an Embperl page.
Spotted by Ilya Ketris.
1.2b10 (BETA) 7 Oct. 1999
- Fixed a great security whole in CGI mode. Because Apache passes
anything after the first '?' to the cgi script as commandline
arguments, embpexec.pl could be tricked into offline mode, where
it returned any file that is readable by the httpd! So if you are
using CGI mode, I strongly recommend to update to 1.2b10.
Now you must use embpcgi.pl instead of embpexec.pl in CGI mode.
Spotted by Jason Holt.
- Added EMBPERL_ALLOW. If the file doesn't EMBPERL_ALLOW Embperl
will return forbidden. This is primarly another security
feature, because dependig on the way you use Embperl in CGI mode,
it will not honour all Apache access restrictions. With
EMBPERL_ALLOW, you can now force it to serve only certain
files. Suggested by Jason Holt.
- Fixed a problem that had occured with magic SVs (tied scalar)
as source for the Execute function. Spotted by Todd Eigenschink.
- Embperl works now with Apache::Session 0.17, 1.02 and 1.04
(1.03 is errornous)
- Fixed a SIGSEGV that occurs when the req_rec parameter of the
Execute functions gets a Apache::Request object instead of a
Apache object, which occured due to the different ways the
Apache internal request_rec is stored inside the object.
Spotted by Francis J. Lacoste.
- Fixed a SIGSEGV that occured when outputting to a scalar and
optReturnError is set. Spotted by Francis J. Lacoste.
- Added a ; after the begin block in startup.pl, which seems had
cause a syntax error in some situations. Spotted by Oyvind Gjerstad.
- exit now works the same in offline, mod_perl and cgi mode, it
ends the execution of the page, but not the programm itself.
- exit inside a sub will now really exit the page. (but exit inside
a file called via Execute will only exit this file, not the whole
request) Spotted by Cliff Rayman.
- Added new hash %http_headers_out which could be used to set arbitary
http header under mod_perl _and_ in cgi mode. "Location" header will
automaticly set status to 301.
- setting http headers and <META HTTP-EQUIV=..> now works also
in cgi mode.
- Session Handling now also works in CGI mode (needs
Apache::Session >= 1.04)
- ACTION attribute of Formtag is now URL en/decoded. Spotted by
Hartmut Palm.
1.2b9 (BETA) 10. Sept 1999
- Fixed a problem with loading Apache::Session 1.01, when
Apache::Session 0.17 is not installed. Spotted by Volker Hess.
1.2b8 (BETA) 9. Sept 1999
- Fixed behaviour of <INPUT>. <INPUT> now does not overide
VALUE="" with the value from %fdat. This seems to has been
broken, since a couple of versions and the fix may break
pages that depends on that wrong behaviour. Anyway I have
to fix it before the release version is out!
- Added a patch (and a FAQ) from Jens-Uwe Mager, so Embperl compiles
and links on AIX.
- Fixed error in URL unescaping, spotted by Hartmut Palm.
- _WINSOCK2API_ gets defined on Win32, when compiling with
Apache 1.3.9. Spotted by Randy Korbes.
- Win32 test uses also embpexec.test.pl (instead of .bat),
so cgi test runs also with Apache 1.3.9. Spotted by Randy Korbes.
- Fixed problem with EMBPERL_SESSION_ARGS that splits the arguments
wrong when, for example, the DataSource contains a '='. Spotted by
Vince Galloway.
- Fix a memory leak which eats one SV per <OPTION> tag, introduced
in 1.2b6.
- Fix a problem that meta commands also recognized as html tags, i.e.
now <if x> is no longer the same as [$ if x $]. Spotted by Danielle Gallo.
- German documentation (IntroD.pod, FeaturesD.pod and EmbperlD.pod)
are now included in the distribution.
1.2b7 (BETA) 30 Aug 1999
- Embperl works now with Apache::Session 1.01
(1.01 _not_ 1.00 or below!)
- Cookie for session id is only send the first time and not
resend if it's already known by the browser. Suggested
by Roman Maeder.
- Fixed a SIGSEGV that occurs with $optRawInput = 1 and a
value is in %fdat, but not in the input html tag. Spotted
by Robert.
1.2b6 (BETA) 19 Aug 1999
- When call another page via Execute EMBPERL_VIRTLOG will
automaticly set to the same value as the in the calling page
- Add parameter 'firstline' to specify the linenumber of the
first line in the input
- Defined missing DECLINED constant for non mod_perl environement
Spotted by James Elson.
- Inside of an A tag URL escaped characters are translated back
to their ascii aquivalent inside of perl code, before the code
is executed. This avoid problems with HTML editors, which
changes space to %20 inside an URL.
- '%' is escaped to %25 inside of URLs
- Inside the A tag only the HREF attribute is URL escaped, instead
of the whole tag.
- The SRC attribute of embed, frame, iframe, img, layer now are
also URL escaped.
- Giving a an array refernce inside an URL, cause Embperl expand
it to URL parameter syntax (i.e. [+ \@A +] becomes A=1&B=2, when
@A = (A, 1, B, 2) ).
- Embperl checks now for unclosed metacommands (if, while etc.) and
unclosed HTML tags (table etc.). Suggest by Todd Eigenschink.
- Fixed a problem when file was not found, which causes in some cases
a SIGSEGV.
- Added new configuration directive EMBPERL_MAIL_ERRORS_TO. If set
all error messages will be send to the given address.
- input_/output_func parameter can take a code reference as
argument. Based on a patch from Jon Tobey.
- Set force PERL_DL_NONLAZY to zero, so make test does not fail
if dynaloader was initialized with PERL_DL_NONLAZY set.
Patch from John Tobey.
- [$ foreach $i(x..y) $] does not require a space before the (
anymore. Suggested by Jonny Cavell.
- select <option value="a & b"> works now correctly. Spotted by
Rick Welykochy.
- Fixed SegFault when parameter input => is numeric. Spotted by
Cliff Rayman.
- Added option optNoUncloseWarn, which disables the warnings
about unclosed if, while, table etc.
1.2b5 (BETA) 5 July 1999
- Renamed __strdup and __strndup so there are no duplicate
symbols when compiling with glibc. Spotted by Michael Hall.
- Removed some debugging message from the logfile output.
- Correct some wrong table entries for html escaping of some
characters like §
- Added optReturnError which causes Embperl to return an
error code and let the calling programm (i.e. Apache)
handle the error. This is necessary to use the
ErrorDocument directive together with Embperl. Spotted by
Michael Smith.
- Fixed the problem that the output of Execute inside a table
didn't come out when optEarlyHttpHeader was set. Spotted by
Chris Alexander.
- %fdat of a Execute will not be overwritten anymore when the
%fdat of the main request was empty. Spotted by Chris Alexander.
- fixed a small memory leak which was caused by not releasing
memory space for the cookie-name/-domain etc.
- added the missing -T switch to embpexec.test.bat, which caused the
taint test in cgi mode to fail on win32
- Added epchar.c.iso-latin-2 from Jiri Novak, which contains the correct
escaping for the iso-8859-2 (iso-latin-2) character set. You may use it
to replace the standard epchar.c
- Added new metacommand [$ sub <name> $] and [$ endsub $] which allows
you to define blocks of code an call them mulitple times inside a page,
either a creating a subrequest Execute('#<name>') or by calling them
directly as a perl subroutine [- <name> -]. Read the docs for more
information on the details and differences.
- Added new parameter "import" to Execute, which let's you import subs
(defined with [$sub <name>$]) into the current page.
- @ffld is filled with 'values %fdat' if the ffld parameter in the call
to the Execute funtion is missing.
- Filedata will held into memory until the end of the request, so a
second call to Execute for the same file will not reread the data
from disk.
- Added emacs/embperl.el. It's a emacs minor mode for Embperl written
by Erik Arneson
- Output of dbgShowCleanup is now sorted by name
- Update the Faq.pod with new Q&A and removed obsolete Q&A
- Made Makefile.PL more smarter in DSO situations. It detecteds now
which of the needed Apache modules are linked staticly and places
neccessary LoadModule statements in the httpd.conf for make test.
This way make test should work also where all modules linked at
runtime, like on RedHat 6. With help form James H. Thompson.
- Makefile.PL ask´s now if it can´t find any modules. On win32
it will not try to guess (the maybe wrong) path anymore.
- Added possibility to get the the uploadInfo from CGI.pm
(e.g. ${${$fdat{upload}}} -> {'Content-Type'} will return the
content type). Requested by Brian Reichert.
- Catch die of CGI.pm when it hit's a 'Malformed multipart POST'.
Spooted by Chris Alexander.
- Add optKeepSrcInMemory which tells Embperl to keep the source
file in memory and not reload it on every request
- Added the possibility to use recursive calls to Execute.
NOTE: You can create local variables via [* local $foo ; *]
- Reworked the cleanup. Now imported values from other modules
left unchanged. This solves problems with using modules
inside Embperl pages, which exports some global variables.
- Added the %CLEANUP hash. Put variables into with should be
additional cleaned up ($CLEANUP{'var'} = 1) or which shouldn't
cleaned up ($CLEANUP{'var'} = 0)
- Special handling for DBIx::Recordset objects, so it's sure
they are really get destroyed
- fixed a problem with dynamic tables, that occurs when you
had tried to repeat multiple table rows
- Embperl compiles now with perl5.005_57+. Patch from Ask Bjoern Hansen
- Cleanup now logs any errors that occurs when calling object
destructors and makes sure errors inside object destructors do
not break Embperl itself.
- Embperl now returns DECLINED when called for a directory. This
way Apache can handle diretories the correct way. This will make
DiretoryIndex (e.g. index.html) work again with Embperl.
- Fixed a problem that @ffld contains the same field more then
one time if posted from a select multiple with multiple items
selected. This caused problems with [$hidden$]. Spotted by
Martin Leja.
- Double quotes (") will be url-encoded to %22 inside URLs.
- Embperl now never writes to the logfile if EMBPERL_DEBUG is zero
- make test now runs with newest version of mod_ssl (2.3.5)
- Added option optKeepSpaces which will disable the removing of spaces
and empty lines from the output. Suggested from Gary Shea.
- Added option optOpenLogEarly, which will cause Embperl to open the
logfile as soon as it is loaded into memory. You can use this when
you loaded Embperl via PerlModule under Apache, to open the log
as root instead of the non-privileged user Apache runs as.
1.2b4 (BETA) 15 Feb 1999
- fixed a problem that $req_rec was sometimes invalid on the
second call to the same page causing Embperl to SIGSEGV.
With help of Todd Eigenschink.
- Cleanup the variable space inside Embperl pages. Before this
fix many of the internal my variables were visible to the
Embperl page. Spotted by Todd Eigenschink.
- multiple form values with the same name are handled now
correctly (concated in a tab delimited string) when send
in a multipart/form-data (file-upload). Spotted by Dirk
Lutzebaeck.
- The dbgForm flag works now also for multipart/form-data
- a missing right *] will be reported as an error.
- [[* is correctly output as [* and not interpreted as a
starting of a perl block. Spotted by Dirk Lutzebaeck.
- fixed a bug that causes the html after an endforeach to be
skiped, when the foreach loop gets an empty array as argument.
Spotted by Dirk Lutzebaeck.
- Makefile.PL checks now for required modules and versions and
generates warnings if necessary
- Do not CLEAR %udat and %mdat in cleanup, so Apache::Session
will not warn anymore about unsupported CLEAR operation.
- Added tests for session management (%udat, %mdat)
- Added more tests to see that $req_rec is correctly setup
- Added module Apache::Session::epDBI which is a subclass of
Apache::Session::DBI and corrects a problem with locking and
cares of serializing requests, so %mdat works correctly.
Please read IMPORTANT NOTE under Session Management in
Embperl.pod
- Added the dbgProfile flag which cause the display of the time
since the request start for every source line in the logfile.
- Correct a problem that the escape character ('\') was not removed
when unescaping the input. Now '<' is correctly translated
to '<' and '\<' is translated to '<' .
- When requesting to view the logfile via the browser now all
lines which does not start with a pid ([<pid>]) are displayed.
- fixed a problem, that sometimes not all errors are shown in the
error page, in conjunction with dynamic tables
- When running under perl 5.005 or higher, the cleanup after the
every request, now not only cleans up scalars, array and hashs,
but also closes all open file- and directoryhandles and undef's
all typglob (which causes for example DBIx::Recordset objects to
DESTROY correctly)
NOTE: This also causes imported variables from other packages/modules
not to be cleanedup anymore!!
NOTE: That the cleanup behaveiour under perl 5.004 and 5.005 is
slightly differnt! The new cleanup doesn't work with 5.004 because
of a bug, which should be corrected in 5.004_05 as soon as available.
- EMail adress from the form is insert as Reply-To header instead of
From header in MailFormTo to avoid problems with unresolvable
EMail adresses.
- Fixed the problem that session management (%udat, %mdat) didn't
work when Execute is used in the same page. Spotted by by Simon Lindgren.
- Fixed a path problem in Makefile.PL. Now pathes on Win32 Systems uses
blackslash instead of slash. Spotted by Randy Kobes.
- Win32 batch files will no longer contain path to perl after the #!,
so cgi tests passes on systems with 4DOS shell. Spotted by Randy Kobes.
- Added ; as terminator for cookie to correctly parse multiple cookies.
Patch from Tim Carrol.
- Changed table_set to table_add when setting the cookie for session data
to avoid problems with other modules setting also cookies.
- Corrected the %ENV problem that mod_perl-1.18 introduced, so both
work together again.
- Added dbgSession flag to enable/disable logging of session handling
- Added configuration diretives EMBPERL_COOKIE_NAME, EMBPERL_COOKIE_DOMAIN,
EMBPERL_COOKIE_PATH and EMBPERL_COOKIE_EXPIRES to configure the cookie
which holds the session id. Suggested by Cliff Rayman.
1.2b3 (BETA) 22 Nov 1998
- fixed an undefined pointer which occurs when using precompiled
[* ... *] blocks. Spotted by Bruce W. Holyman and Paul J. Schinder
- removed unwanted 0xa0 characters from tagscan.htm which causes
the test to fail on sunos. Spotted by Paul J. Schnider.
- Enhanced the detection of Stronghold, Apache SSL and mod_ssl
so they are found if they are not in a standard path. Spotted
by Brad Cox.
- Convert relativ path for apache source to absolute to avoid
problems within test script. Spotted by Brad Cox.
- Make Embperl compile with useperio=defined. Spotted by Todd
Eigenschink.
- Makefile.PL does now check if mod_perl is compiled into apache
and don't create a config for USE_DSO situtation even if
libperl.so exists.
- Added a workarround in the Execute('foo.htm') call, to avoid a
bug in perl5.004 which causes a SIGSEGV. Spotted by Michael J.
Schout and Chris Alexander.
1.2b2 (BETA) 9 Nov 1998
- There is now a short form of the Execute function. You can
now include a sub page in an Embperl page by simply writing
[- Execute ('filename.html') -] or use
[- Execute ('filename.html', 1, 2, 3) -] to pass additional
parameters
- Added new block [* ... *]. This block compiles code to an
outer subroutine which surounds the whole page. This makes
it possible to define "local" variables with a scope of the
whole page, which would be necessary for recursive calls
to Execute.
Also this let you use perl control structures inside Embperl
pages: e.g.
[* foreach $v (1..5) { *] Cnt = [+ $v +] [* } *]
NOTE: [* ... *] blocks _must_ always end with a ;,{ or }
[* ... *] cannot apear inside html tags that are
interpreted by Embperl (unless you disable the
interpretation of such tags like table, input etc.)
- Added a comment block: Everything between [# and #] is a
comment and is removed from the output.
NOTE: [* ... *] blocks also interpreted inside of a
[# ... #] block, all other blocks [+/-/$ $/-/+] are not.
- Added magic hash %mdat, which can be used to store persitent
data on a per module basis (needs Apache::Session, with
path in session.patch applied)
- Done more tests on session handling, seems to work fine now.
- Added new option dbgNoHiddenEmptyValue which suppresses
empty hidden input fields in the [$hidden$] meta command.
Patch from Steve Willer.
- Whitespaces after [...] blocks are removed in the output, so
there will be less empty lines, makeing the output shorter and
more readable, based on a patch from Todd Eigenschink.
- Embperl compiles now with mod_ssl (from Ralf Engelschall).
Spotted by Dirk Lutzebaeck and Randel Schwartz.
- Added a patch from Todd Eigenschink to build Embperl with
Stronghold 2.4.1
- Added patch from Gerald McLarnon so Embperl compiles on AIX
- Added optAllowZeroFileSize to accept files of length 0,
without that option Embperl will report NOT_FOUND.
Suggested by Doug Bagley
- fixed a wrong call to logerror when OPT_EXECCGI is not on,
spotted by Dirk Lutzebaeck.
- fixed the problem that reloads only takes place at the next day,
because mtime was an int instead of a double (introduced in1.2b1.
Spotted by Michael Smith and Roman Maeder.
- fixed a problem that changing of the filesize was ignored, when
a documents is reloaded (introducted in 1.2b1)
- cleanup for all subpages are disabled if main request has
disabled cleanup and subpages does not specify otherwise
- dbgShowCleanup works again
- Every package is only cleanuped once, also it's included multiple
times in one page
- %fdat and @ffld are setup correctly when optDisableVarCleanup
is set
- DEFS=-DEPDEBUGALL compiles again, spotted by Michael Smith
- fixed that cleanup is never called with Execute nesting, when
req_rec was not set. Now the parameter req_rec isn't necessary
anymore. Spotted by Michael J.Schout
- Changes of $escmode inside a HTML-A tag now handled correctly,
spotted by Michael Smith
- fixed problems with links to the logfile and the line break
in the html log file display
- fixed a problem with blocks that expand to nothing inside of Embperl
interpreted HTML tags.
- Adapted test script to modified error output of Apache 1.3.4.
Spotted by Eric Cholet.
- Empty values (VALUE="") in input tags will not be overridden by
value in %fdat
1.2b1 (BETA) 8 Oct 1998
- I have reworked the whole source code so Embperl is now
going to be an object. This means Embperl is reentrant, you
can call Execute within an Embperl page, for example to include
the same header on each page.
- Addeded Session handling via Apache::Session. Simply store data
to %udat and let Embperl do the rest for you. Experimental!
NOTE: You need Apache-Session-0.16.1 or higher and must apply
the patch from session.patch to it.
- Added test for calling Execute inside a Embperl page
- Errors of Input/Output function now also log to the httpd error log
- Added an test for input file not found
1.1.1 15 Sep 1998
- A lot of documentation updates. Now Embperl ships with most of
the documentation which is also available on
https://perl.apache.org/embperl/
This includes:
- Intro.pod an introduction to Embperl
- Faq.pod an new very much extented version of the FAQ
and a lot of spell checking, gramar checking and so on
Thanks very much to Nora Mikes for putting together the FAQ
and doing a lot of proof reading.
- eg/x/upload.htm an example for file upload within Embperl
- splited documentation out of Embperl.pm into Embperl.pod
to make it load a little bit faster (Embperl.pm is now 30K
instead of 90K)
- Optimized the loading of other modules. Other modules are now
only loaded when really necessary. This make Embperl in CGI mode
about 2 times faster then version 1.1.0 was.
- Added a test for file-upload
- Embperl compiles and works now with threaded perl, but Embperl
is currently B<not> threadsafe. So you can use Embperl in a
threaded environement, but you have to make sure that only one
thread useses Embperl at a time.
- Fixed a memory leak which has occured in checkboxes and selects
- Enhanced test.pl
- MailFormTo: Send \n after mail header to work correctly with all
mail servers, added EMBPERL_MAILHOST to specify mail server hostname,
MailFormTo dies when it can't connect to mailserver. Spotted by
Steffen Geschke.
1.1.0 28 Jul 98
- Added support for perl5.005 (currently only without threads!)
- Nesting of metacommands and HTML tags are now independent of
each other.
- Added examples in eg/x for do .. until, foreach, if,
DBI datbase access, DBIx::Recordset database access and a
input- / confirmation form.
- Added optUndefToEmptyValue which will cause Embperl to treat non-
existent values in %fdat as an empty string in input tags, as suggested
by Steve Willer.
- Catch "die" within EMBPERL_INPUT/OUTPUT_FUNC and write error
message to the logfile
- Write error message of LWP::UserAgent in ProxyInput to logfile
if any
- Added test for POST Requests
- Added support for tests when mod_perl is built with USE_DSO.
Spotted by Christian Oyarzun.
- Selects and checkboxes are setup correctly if state is set via %fdat.
Spotted by Todd Eigenschink and Steve Willer.
- Changes URL escaping so that only space, '+', '&', '=' and chars < 0x20
will be escaped to avoid problems with older netscape browsers.
- Added missing documentation for req_rec parameter of the Execute
function. Spotted by Eric Cholet.
- Send correct http header for error page, spotted by Steve Willer
- Fixed a memory leak in foreach metacommand
- Removed limit of 2048 Bytes for GET request data (there is no
limit anymore). Spotted by Steve Willer
- Read all POSTed data (not just the first 1024 Bytes). Patch from
Steve Willer.
- Removed some compiler warnings spotted by Tarang Kumar Patel
- Make sure all data is flushed to the logfile at the end of
each request
- Fixed a bug that causes Init to set DebugFlags to 1 instead of 0.
Spotted by Eric Cholet.
1.1b2 27 Jun 98
- Added an additional note for input- and output- escaping
which is described in "Inside Embperl" section.
It's very important to understand this if you have any
problems with HTML tags or filehandles in your Perl code.
- Embperl will recognize Apache::exit. If called inside an
Embperl page or in a module called from an Embperl page,
the processing of the document is immediately aborted.
Everything processed so far is output/sent to the browser.
Based on a patch from Steve Willer.
- When running under mod_perl, 'exit' is an alias for Apache::exit
in every document.
- Enhanced the format of the Errorpage. Thanks for the patch
from Steve Willer
- Added a [$ foreach $] and a [$ do $] ... [$ until $]
metacommand
- Now multiple checkboxes with the same name will be set
correctly, to the values posted to the document. Spotted
by Todd Eigenschink and Nathan Krislock.
- [+ local $escmode = 0 .... +] works now. The first setting
of $escmode in a [+ ... +] block will now applied to the
whole block. You cannot change $escmode inside a [+ ... +]
block. Spotted by Chris Thormann.
- Fixed the return path setting in MailFormFields
- ProxyInput now passes http headers, so authentification
will be passed thru.
- Removed the limit 2048 for the length of HTML tags when [+ ... +]
are included. Now there is no limit anymore. Spotted by Doug Bagley
1.1b1 14 Jun 98
- Now you can set custom input and/or output functions via
EMBPERL_INPUT_FUNC and EMBPERL_OUTPUT_FUNC. This can be
used to chain modules together or to get the input from
(or put the output to) non-standard locations.
- Added a function ProxyInput which can be used to fetch
the input from another URL instead of the disk. One possible
usage for this is to let mod_include parse the document first
and then let Embperl process it. Suggested by Steffen Geschke.
- Added a function LogOutput, which will write every generated
document to a unique file in addition to sending it to the
browser. Suggested by Dan Peterson.
- EMBPERL_FILESMATCH allows you to select which files in
a Location should be processed by Embperl. The rest are handled
by the Apache default handler. This allows you to have
Embperl and non-Embperl documents (like gifs etc.) in
the same directory.
- Logfile was displayed at the wrong position when requested via the
browser the first time after the httpd was started.
1.0.0 12 Jun 98
- Make test runs with Apache 1.3.0, spotted by Eric Cholet
- Added a definition for MAX_PATH, which is not there on SunOS 4.1.4.
Spotted by Dan Peterson
- Fixed a bug that causes Makefile.PL to interpret MakeMaker parameters
spotted by Jason Bodnar
- Fixed a bug that caused EMBPERL_PACKAGE not to be recognized.
- Fixed a bug that caused optDisableFormData not to be recognized for
multipart formdata.
0.28-beta 19 May 1998
- I have added a chapter "Inside Embperl" to the docs, I hope this
will make it clearer how escaping and unescaping works and how you
can get desired results. Highly recommended! (Thanks for spell- and
grammar-checking to Todd Eigenschink)
- make test now runs under win32 (You need to install LWP and libwin32)
IMPORTANT: You need a mod_perl version > 1.11 or you get a deadlock.
- Compiles with apache_1.3b6
- Added support for Stronghold and Apache_SSL to Makefile.PL and test.pl
- Changed dbgEarlyHttpHeader to optEarlyHttpHeader because it's not a
debugging option. dbgEarlyHttpHeader still persists, but will be removed
in one of the following versions
- Embperl does not change the current working directory when optDisableChdir
is set, this saves some milliseconds per request, also the cwd is moved
to the c code, so it runs faster then Cwd::fastwd.
Thanks to Doug Bagley for the profile which has shown how much time
Cwd::fastcwd consumes
- You can set optDisableHtmlScan in EMBPERL_OPTIONS. If set, Embperl only
recongizes [+/-/$/! ... !/$/-/+], but will not do anything with HTML tags,
as suggested by Randy Harmon.
- optDisableInputScan, optDisableTableScan and optDisableMetaScan can be
used to disable only some of the HTML tag processing
- You can set optDisableFormData in EMBPERL_OPTIONS. If set, Embperl
will not setup the %fdat and @ffld, as suggested by Doug Bagley
- If you use Execute, the explicit call to Init/Term isn't needed anymore,
because Embperl performs the Init automatically when it is loaded. The
Init function can still be used to change the path of logfile. Suggested
by Honza Jirousek
- All options and debugging flags can now be read/set at runtime. For
example $optRawInput = 1 sets the optRawInputFlag. Some of the options
are read-only, because they must be known before the request.
- Added more tests
- Embperl discards all errors which occur in an expression after the end
of a dynamic table, and which are only evaluated to detect the table end and
never displayed. This allows usage of object methods in dynamic tables,
where the table end is caused by an undefined object. (see
test/html/object.htm for an example). Spotted by Jason Bodnar.
- Printing to filehandle OUT has the same effect as using [+ .. +]
(including html-escaping)
- Setting optRedirectStdout causes Embperl to tie STDOUT to the Embperl
output stream (same as print OUT ...), suggested by Jason Bodar
- Setting optAllFormData will make empty formfields occur in %fdat and @ffld
with an empty string value, suggested by Dan Peterson
- Embperl now handles SELECT MULTIPLE correct. All OPTIONs which are
posted to the document will now be selected by Embperl, spotted by
Todd Eigenschink
- Fixed a bug that caused a '>' inside a [$/! ... !/$] block to be
interpreted as the end of a HTML tag, spotted by Todd Eigenschink.
- Fixed a bug which caused the SELECT/OPTIONS tag to not insert their
values in %idat and therefore made [$hidden$] work incorrectly, spotted by
Dave Paris [aka Spider]
- Fixed a bug that caused the INPUT CHECKBOX tag to not insert its
value in %idat when the value wasn't in %fdat and therefore made [$hidden$]
work incorrectly.
- Fixed a problem that caused magical variables to be handled as if they
were undefined, which caused dynamic tables to end, sometimes prematurely.
- Closing HTML tags will be correctly removed form Perl source again
(when optRawInput is not set)
- will be translated to space (0x20) instead of 0xf0
- When EMBPERL_DEBUG is set 0, only errors and warnings will be written to
the logfile
- MailFormTo will generate the correct TO header and insert a Return-Path
from the posted e-mail address
- Changed detection of mod_perl to $ENV{MOD_PERL}. This makes sure that
it will work correctly, even if Apache.pm isn't loaded.
- Re-entered the optDisableEmbperlErrorPage, which was lost in one of the last
releases, spotted by Doug Bagley.
- The content_length of the Apache request_rec will only be set when a http
header is sent.
- If, Elsif and While metacommands now use SvTRUE instead of a != 0 to test the
evaluated expression, so they now behave like the Perl ones do. Spotted by Jason
Bondar
0.27-beta not available
0.26-beta 16 Mar 98
- Adapt include pass to compile with apache_1.3b5
- Applied patch from Dan Walters to make Embperl compile with
apache_1.3b3 and mod_perl on Win 32
- Changed the order of included c headers and undef some macros
inbetween (copied from mod_perl.c) to compile with Apache on Win 32
- Embperl works with apache_1.3b5 on Win NT ('make test' does not yet)
(You need the Apache source and must compile Perl with the vc++)
- Added the 'param' parameter to the 'Execute' function to pass parameters
from and to the Embperl document.
- Added the 'fdat' and 'ffld' parameter to the 'Execute' function to
setup %fdat and @ffld
- Fixed a problem which displayed tables a second time after the end of
the document, if dbgEarly HttpHeaders was on, thanks to Ask Bjorn Hansen
for spotting this.
- Fixed the return values of CheckFile, which was not correct after a change
from 0.24 to 0.25. Thanks to Todd Eigenschrink for spotting this.
- Fixed an error which was causing Embperl to crash on an HTML input tag without
the 'type' parameter. Thanks to Todd Eigenschrink for the hint.
- Fixed a problem that caused Embperl to not recognize errors correctly
when reading the sourcefile
0.25-beta 17 Feb 1998
- Included the "translation" of the Embperl POD to a human-readable
form done by Todd Eigenschink
- Started a FAQ file from the questions I answered by e-mail
- Added the function Execute, which can be called from Perl programs
(or Apache::Registry scripts), and can take input from (and/or
output to) memory, as suggested by Doug Bagley and Randy Harmon
(Look at test/html/registry/Execute.htm for an example)
- Changed the source so that it will compile on aix, spotted by
Patrick McAuliffe
- Access sys_errlist via perl macro Strerror to avoid errors with
redeclaration, thanks for spotting this to Honza Jirousek
- Changed the tab size from 4 to 8 in my editor to be compatible with
Unix standard
- Added warning if dbgLogLink is set and EMBPERL_VIRTLOG is not
- Changed the delimiter of metacommand from space to any non-alpha char
to allow writing [$while(a==b)$] as suggested by Michael D. Dowling
- Added config variable EMBPERL_ESCMODE to set inital values of $escmode
as suggested by Todd Eigenschink
- Added [! ... !]. Does just the same as [- ... -] but will only execute
on the first request for that document. This can be used to do one-time
initialization and to define subroutines.
- Changed push_handlers to register_cleanup, so PERL_STACKED_HANDLERS and
PERL_CLEANUP aren't necessary anymore, as suggested by Doug MacEachern
- If it exists, the function CLEANUP of the processed document will be called
before the variable cleanup, but after the connection to the client is closed
- Added a closing </font> in the logfile which is sent to the browser, otherwise
MS IE 4 can't handle it
- Changed Perl constants in Perl part from subroutines to "real" constants
- Did some general rearranging of code
- Fixed a memory leak which caused Embperl to lose one sv per Perl
block when a document is reloaded
- Fixed a bug which caused [+... +] within the Textarea tag to be ignored,
spotted by Todd Eigenschink
- Fixed a bug in sorting hidden fields
- Fixed a wrong argument to MakeMaker, which was causing Embperl to not be able
to build statically, spotted by Anatoli Belomestnov (and added a
description to the Faq on how to build a copy of Embperl which is statically-
linked to mod_perl)
- Fixed a problem which was causing the LOG filehandle to not be imported in
the documents package, this was causing everything printed to LOG to sort
of disappear
0.24-beta 13 Jan 1998
- Added the option optRawInput which causes Embperl not to pre-process the
source for a Perl expression (the only exception is that CR will be removed).
This option should be set when you are writing your code with an ascii editor.
If you are using a WYSIWYG editor, which inserts unwanted HTML tags in your
Perl expressions and escapes special characters automatically (i.e.
< will occur as < in the source), you should not set this option, and
Embperl will automatically convert the HTML input back to the Perl
expression you have written. (Thanks to Todd R. Eigenschink for a patch)
- $0 is set to the filename of the HTML source
- Change Current Working Directory to directory of HTML source
- Warning messages are now also logged in logfile at the correct
position, next to the source line
- Perl error and warning messages contain the filename and correct
linenumber of the HTML source
- Sourcelines in logfile contain linenumbers
- Output via [+ ... +] of undefined values at the end of a dynamic table
(which must be there to end the table) do not generate a warning anymore
NOTE: If you use them in an expression (such as $a = $arr[$row] or simply
inside " ", you will still get a warning)
- Open HTML source in binary mode on Win32 to avoid overhead of crlf -> lf
translation.
- Use aplog_error for apache_1.3 to avoid senseless os errors written to
httpd error log
- Removed some uninitializied value messages when running with
-w / PerlWarn on, spotted by Todd R. Eigenschink
- Fixed a bug which has caused nested 'while' loops to execute incorrectly
if the condition of the outer one is false
0.23-beta 31 Dec 1997
- Fixed a bug which caused $req_rec to be not defined anymore (Thanks to
Todd R. Eigenschink for the hint and debugging)
- Fixed a bug in escaping special HTML char to normal ascii (Thanks to
Todd R. Eigenschink for the hint)
- Makefile.PL now sets the path to your Perl binary in embpexec.pl and
embpexec.test.pl, so that it works regardless of where your Perl is located
(Thanks to Randall Schwartz for the hint)
- Added the SSLDisable to the test config when running an httpsd. (Thanks
to David Scott for the hint and Ralf S. Engelschall for the Syntax)
- Fixed a bug in <META> tag interpretation which was causing random errors
when not compiled for mod_perl
0.22-beta 28 Dec 1997
- Changed include path generated in Makefile.PL so Embperl also
compiles with apache_1.3b3 (Thanks to Doug Bagley for the hint)
0.21-beta 25 Dec 1997
- Embperl offline mode now works under Win 32 (mod_perl and cgi mode
not tested under Win 32 yet, but maybe it works too)
- Totally reworked safenamespace and operatormask handling. Works now
without memory leak, is fully configurable and also does p-code
caching. If you use it, please look at the documentation, because
the configuration has changed.
- Embperl now sends its own error document if it detects an error.
The page contains all the error messages and if you have the
dbgLogLink enabled, all errors are links to the corresponding
line in the logfile. (this can be disabled with optDisableEmbperlErrorPage)
- Added new metacommand [$VAR ... $], which can be used to declare
variables and apply the strict pragma (same as use strict ; use vars )
- Added debug flag dbgHeadersIn which causes Embperl to log all http
headers which are received from the client
- Don't change any unknown HTML Escapes (i.e. && has been translated
to ? in versions < 0.21)
- dbgShowCleanup logs all variables which are automatically undefined at the
end of a request (for scalars the value is also shown)
- Error messages will also be cached, so that the compiling of the code
only takes place once, because erroneous Perl code will cause memory
leaks in Perl itself if it's compiled on and on and on.
- Optimized the compiling of the embedded Perl code
- Changed use Apache::Constants to conform with the new default exports
introduced in mod_perl-1.07_01
- Output of the 'hidden' metacommand is sorted in the same order as the input
from the formfields (sorting order can also be supplied as third argument)
- <meta http-equiv= ... > will override the corresponding http header
(this keeps netscape from asking the user to reload the document
when the content-type differs between the http header and the
meta http-equiv)
This can also be used to set http headers
- Fixed a problem that Embperl magic variables do not work when
the package exists before the first call to Embperl
- Fixed a problem that caused a SIGSEGV when retrieving the same document
containing a Perl error for the second time from the same child
- Fixed a problem that caused Embperl to terminate in offline/cgi-mode
when the file was not found or when access was forbidden
- Fixed a problem with the 'hidden' metacommand, which came up when
arguments were supplied with surrounding spaces
- Fixed a problem that Embperl did not handle metacommands correctly
when HTML tags (e.g. <br>) were embedded
0.20-beta 15 Nov 97
- Every file is executed in a separate package (don't confuse this
with safe namespaces) to reduce unwanted effects on each other
- Added the configuration directive EMBPERL_PACKAGE which can be used to override
the automatically-generated package name
- The namespace (package) used by a request is cleaned up afterwards.
That means that every scalar, hash or array is undef'ed after the
request to make sure nothing is lying around to possibly make the next request
misbehave.
This requires mod_perl with PERL_CLEANUP=1 and PERL_STACKED_HANDLER=1!
NOTE: To get persistent variables, place them in another namespace i.e.
write $persistent::x instead of $x
- Added configuration directive EMBPERL_OPTIONS to configure various runtime
options. Now only the scalar cleanup can be disabled.
- use log_error for writing to Apache error log to get timestamp
- Escaping inside an <A> tag is changed from an HTML escape to a URL escape
i.e. the space is translated to + and & is translated to %26 and so on
- Escaping can now be turned on and off via $escmode
- Concats ENV and cgi_env under mod_perl so that PerlSetEnv can be used
instead of SetEnv for configuration. In contrast to SetEnv, PerlSetEnv
allows different values per directory/virtual host
- Added two links to show source-loglines and eval-loglines when dbgLogLink
is enabled to have a quick jump to the logfile
- Reget pid for every request, so the correct one will be written to the
logfile, also when Embperl is loaded at server startup
- Check error log in make test, added test for error output
- Fixed a bug which causes Embperl to cause a SIGSEGV when a Perl syntax
error occurred
- Fixed a bug so that a '>' inside of [+/- ... -/+] is not detected as the end
of an HTML tag (Thanks to Todd R. Eigenschink)
0.19-beta 29 Oct 97
- Rewrote the code for the LOG handle. Now the handle LOG is tied so that every
print/printf is written to embperl.log at the right position. Use this to
do logging from your embedded code or modules
- Fixed a bug which caused garbage to be displayed in dynamic tables (or made
parts of the table disappear)
0.18-beta 25 Oct 97
- Added caching of p-code. Now all Perl code is compiled only once. On the
second request, the compiled p-code is used. This makes, for example, the
table.htm from the test about 4 times faster on the second run then it was in
previous versions of Embperl. Also, tables and loops are faster in the first
request, because the code is only compiled in the first iteration.
- <Select>/<option> is now handled like <input>, this means that if a value
for the select exists in %fdat, the corresponding option is automatically
selected.
- Added support for table heading (<th> tag). If all cells in a row are surrounded
by <th>/</th> instead of <td>/</td> the row is interpreted as column headings and
printed only once. Row headings are not supported yet, but in one of the next versions...
- Added support for multipart/formdata to support fileupload. Embperl automatically
detects multipart/formdata and lets CGI.pm handle it. The results are also
present in @ffld and %fdat like for normal formdata. See CGI.pm for more docs.
(Thanks to eigenstr@mixi.net for the idea and material)
- Now all the output is kept in memory and the http-header are sent when the
processing is finish. This gives the ability to set http-headers (only under mod_perl)
within the page. Also now the Content-Length can be sent in the http-header.
(Thanks to eigenstr@mixi.net for the idea and material)
- Added tests for mod_perl mode and running as cgi-script, if compilation
for mod_perl is enabled (Thanks to Doug MacEachern for lots of ideas
and code I have borrowed from his mod_perl)
- Removed "= true" in MailFormTo which caused a warning and didn't declare
syserr_list in ep.h on FreeBSD (Thanks to Michael Fuhr for the hints)
- Added SYSNOPSIS section to docs to avoid pod2man warning and changed
apache/src/regx to apache/src/regex in Makefile.PL (Thanks to Bob Wilkinson)
- Splitted C-sources in some more source files
- Fixed two minor memory leaks. Now the Embperl test suite can run 1000 times and
more without making the httpd grow!
0.17-beta 30 Aug 97
- Removed some Compiler Warnings (Thanks to Ian Kallen for reporting them)
0.16-beta 29 Aug 97
- Added more restrictive access check when running under mod_perl
* Option ExecCGI must be set
* must not be a directory
- Added a (few) more docs about how to view the Embperl logfile with
your browser
- Added a declaration for error-dependent stuff to compile on Solaris, check errno before
accessing sys_errlist to avoid SIGSEVs, Fixed another warning from Sun Pro C Compiler
(Thanks to Dan Peterson)
- Switched I/O to PerlIO if supported by installed Perl version.
Should now work with sfio (not tested yet)
- Added possibilty to include Embperl commands in all HTML tags
(did not work for body, table and tr tags in previous versions)
- Will now preserve case of HTML tags
- Do not interpret unknown HTML tags in any way, so as to handle "<" characters
which do not start a HTML tag better
- Do not display the time needed for the request if CLOCKS_PER_SEC not
defined (e.g. SunOS - Thanks to Dan Peterson)
- Added apache_xx/src/regx to include path, to avoid problems when
Apache was built with its own regx library
- Now Embperl shows which tags don't match in error message (table, dir, select etc.)
- Fixed a bug which caused "[" characters to be printed even in a false
if path
0.15-beta 11 July 1997
- Added interpretation of SELECT Tag to generate dynamic listboxes
from an arrary
- Fixed a problem with dynamic lists
- Fixed some warnings displayed by the Sun Pro C Compiler (Thanks to Dan Peterson)
- Fixed an error message about missing IO::Handle
- Changed all // comments to /* */ to be more compatible with compilers other
than the gnu-c compiler
- Inserted a missing return in oputc which caused a SIGSEV on Solaris (Thanks
to Dan Peterson)
- Checked return code of Logfile open, to prevent a SIGSEV when Embperl cannot
write to the logfile (it now writes an error message in server's errorlog)
(Thanks to Dan Peterson)
- Errors will also be logged to the server's error log (written to stderr)
0.14-beta 30 Juni 1997
- adding 8192 to EMBPERL_DEBUG and setting EMBPERL_VIRTLOG will add a link
to Embperl output, so you can directly view the right part of the logfile
with your browser
- Added the LOG filehandle to print to the Embperl logfile
- Added the possibility to handle multiple form fields with same name
- chars which are a result of a Perl expression will not be escaped to HTML if
they are prefixed with a backslash
- Added support for scanning the parameters of input tags for Perl code i.e.
[- -] and [+ +] substitution takes place
- Replaced carriage return in Perl expression with space to avoid Perl 5.004 error
about carriage return
- added $req_rec to access the Apache server api when running under mod_perl
- Fixed a bug in Safe namespace handling which was always causing ERR: 17 Namespace unknown
- Fixed a bug which caused dynamic tables to end, if a 'if', 'while' and etc. was included
- Fixed a bug that caused [$cmd$] to be executed only in the first iteration of a 'while'
or a table
- Fixed some bugs in input tag interpretation
- Fixed a bug which occurred when Embperl encountered an input tag with value="" and %ffld=""
- Fixed a bug in embpexec.pl that caused the options to be ignored when running offline
0.13-beta April 26 1997
- Moved EPENTRY (embperl_init) down to avoid crashing when compiled with
-DEPDEBUGALL
- Added #undefs for stdio function to compile with Perl > 5.003
NOTE: This is a quick hack, and will be changed to use PerlIO in
one of the next releases, so we can tie stdout of Embperl
- Added pids (to distinguish between muliplite requests) and time to
logfile output
- Made many functions static and names of externals more unique to
avoid conflicts of symbolnames with other modules
- If file not found return status 404 instead of 500
- Add Apache::Embperl so the module shows at CPAN also under
module/by-module/Apache/ as suggested by Doug MacEachern
0.12-beta not publicly released
- The mask has been removed from namespace option so it can be used
with safe.pm > 2
- Embperl works with -T / PerlTaintCheck on
- Add function MailFormTo to send form contents via email
- The dbgSource option displays only one line for better overview
- Fixed a bug which caused the Perl operator '<' to be interpreted
as an HTML tag in tables or while loops after the first iteration
- Added ffld array for mod_perl mode to get the order of form fields
- Removed vsnprintf since its not available on all platforms
- Corrected handling of empty dynamic tables
- Fixed a bug which was causing a Segmentaion Fault when the first
table is empty
- Added a script for make test
- Fixed Error with nested if
- Log compilation errors of embedded Perl code
- Avoid some warnings in Embperl.pm
0.11-beta March 25 1997
- Name changed from Embperl to HTML::Embperl!!!!!!!!
- FORM & ENV debug output now available in all modes
- Output from [+ +] and INPUT fields are escaped
(e.g. < is send as < )
- Added two-dimensional tables
- Fixed a bug which caused an endless loop when using a \
- Fixed escaping of special HTML chars above ascii code 128
- Added support for list tags (dir, menu, ol, ul, dl)
- Added support for textarea tag
- Fixed some errors
0.10b-beta Jan 23 1997
- fixed some errors
0.10beta Jan 18 1997
- first public beta release