NAME

App::Dest - Deployment State Manager

VERSION

version 1.32

SYNOPSIS

dest COMMAND [OPTIONS]

dest init               # initialize dest for a project
dest add DIR            # add a directory to dest tracking list
dest rm DIR             # remove a directory from dest tracking list

dest watches            # returns a list of watched directories
dest putwatch FILE      # set watch list to be what's in a file
dest writewatch         # creates watch file in project root directory

dest make NAME [EXT]    # create a named template set (set of 3 files)
dest expand NAME        # dump a list of the template set (set of 3 files)
dest list [FILTER]      # list all actions in all watches
dest prereqs [FILTER]   # like "list" but include report of prereqs

dest status             # check status of tracked directories
dest diff [NAME]        # display a diff of any modified actions
dest clean [NAME]       # reset dest state to match current files/dirs
dest preinstall [NAME]  # set dest state so an update will deploy everything

dest deploy NAME [-d]   # deployment of a specific action
dest verify [NAME]      # verification of tracked actions or specific action
dest revert NAME [-d]   # revertion of a specific action
dest redeploy NAME [-d] # deployment of a specific action
dest revdeploy NAME     # revert and deployment of a specific action
dest update [INCS] [-d] # automaticall deploy or revert to cause currency

dest version            # dest current version
dest help               # display command synposis
dest man                # display man page

DESCRIPTION

dest is a simple "deployment state" change management tool. Inspired by what Sqitch does for databases, it provides a simple mechanism for writing deploy, verify, and revert parts of a change action. The typical use of dest is in a development context because it allows for simplified state changes when switching between branches (as an example).

Let's say you're working with a group of other software engineers on a particular software project using your favorite revision control system. Let's also say that you have a database that undergoes schema changes as features are developed, and you have various system activities like the installation of libraries or other applications. Then let's also say the team branches, works on stuff, shares those branches, reverts, merges, etc. And also from time to time you want to go back in time a bit so you can reproduce a bug. Maintaining the database state and the state of the system across all that activity can be problematic. dest tries to solve this in a very simple way, letting you be able to deploy, revert, and verify to any point in time in the development history.

See below for an example scenario that may help illustrate using dest in a pseudo real world situation.

Note that using dest for production deployment, provisioning, or configuration management is not advised. Use a full-featured configuration management tool instead.

COMMANDS

Typing just dest should bring up the usage instructions, which include a command list. You should be able to execute dest commands from any directory at or below your project's root directory once the project has been initiated in dest.

init

To start using dest, you need to initialize your project by calling init while in the root directory of your project. (If you are in a different directory, dest will assume that is your project's root directory.)

The initialization will result in a .dest directory being created. You'll almost certainly want to add ".dest" to your .gitignore file or similar revision control ignore file.

add DIR

Once a project has been initialized, you need to tell dest what directories you want to "track". Into these tracked directories you'll place subdirectories with recognizable names, and into each subdirectory a set of 3 files: deploy, revert, and verify.

For example, let's say you have a database. So you create db in your project's root directory. Then call dest add db from your root directory. Inside db, you might create the directory db/schema. And under that directory, add the files: deploy, revert, and verify.

The deploy file contains the instructions to create the database schema. The revert file contains the instructions to revert what the deploy file did. And the verify file let's you verify the deploy file worked.

rm DIR

This removes a directory from the dest tracking list.

watches

Returns a list of tracked or watched directories.

putwatch FILE

Sets the current list of tracked or watched directories to be what's in a file. For example, you could do this:

dest watches > dest.watch
echo 'new_dir_to_watch' >> dest.watch
dest putwatch dest.watch

writewatch

Creates (or overwrites) a watch file in the project root directory with the contents of the currently watched directories.

make NAME [EXT]

This is a helper command. Given a directory you've already added, it will create the subdirectory and deploy, revert, and verify files.

# given db, creates db/schema and the 3 files
dest make db/schema

As a nice helper bit, make will list the relative paths of the 3 new files. So if you want, you can do something like this:

vi `dest make db/schema`

Optionally, you can specify an extention for the created files. For example:

vi `dest make db/schema sql`
# this will create and open in vi:
#    db/schema/deploy.sql
#    db/schema/revert.sql
#    db/schema/verify.sql

expand NAME

This command lists out the relative paths and names of the 3 files of the action provided, so you can do stuff like:

vi `dest expand db/schema`

list [FILTER]

This command will list all tracked directories and every action within each directory. If provided a filter, it will limit what's displayed to actions containing the filter.

prereqs [FILTER]

This command will list every action within any tracked directory, then for each action, it will list any prereqs of that action. If provided a filter, it will limit what's displayed to actions containing the filter.

status

This command will tell you your current state compared to what the current code says your state should be. For example, you might see something like this:

diff - db
  + db/new_function
  - db/lolcats
  M db/schema/deploy
ok - etc

dest will report for each tracked directory what are new changes that haven't yet been deployed (marked with a "+"), features that have been deployed in your current system state but are missing from the code (marked with a "-"), and changes to previously existing files (marked with an "M").

diff [NAME]

This will display a diff delta of the differences of any modified action files. You can specify an optional name parameter that refers to a tracking directory, action name, or specific sub-action.

dest diff
dest diff db/schema
dest diff db/schema/deploy

clean [NAME]

Let's say that for some reason you have a delta between what dest thinks your system is and what your code says it ought to be, and you really believe your code is right. You can call clean to tell dest to just assume that what the code says is right.

You can optionally provide a specific action or even a step of an action to clean. For example:

dest clean db/schema
dest clean db/schema/deploy

preinstall [NAME]

Let's say you're setting up a new system or installing the project/application, so you start by creating yourself a working directory. At some point, you'll want to deploy all the deploy actions. You'll need to init and add the directories/paths you need. But dest will have a cache that matches the current working directory. At this point, you need to preinstall to remove that cache and be in a state where you can update.

Here's an example of what you might want:

dest init
dest add path_to/stuff
dest add path_to/other_stuff
dest preinstall
dest update

You can optionally provide a specific action or even a step of an action to preinstall similar to clean.

deploy NAME [-d]

This tells dest to deploy a specific action. For example, if you called status and got back results like in the status example above, you might then want to:

dest deploy db/new_function

Note that you shouldn't add "/deploy" to the end of that. Also note that a deploy call will automatically call verify when complete.

Adding a "-d" flag to the command will cause a "dry run" to run, which will not perform any actions but will instead report what actions would happen.

verify [NAME]

This will run the verify step on any given action, or if no action name is provided, all actions under directories that are tracked.

Unlike deploy and revert files, which can run the user through all sorts of user input/output, verify files must return some value that is either true or false. dest will assume that if it sees a true value, verification is confirmed. If it receives a false value, verification is assumed to have failed.

revert NAME [-d]

This tells dest to revert a specific action. For example, if you deployed db/new_function but then you wanted to revert it, you'd:

dest revert db/new_function

Adding a "-d" flag to the command will cause a "dry run" to run, which will not perform any actions but will instead report what actions would happen.

redeploy NAME [-d]

This is exactly the same as deploy, except that if you've already deployed an action, "redeploy" will let you deploy the action again, whereas "deploy" shouldn't.

Adding a "-d" flag to the command will cause a "dry run" to run, which will not perform any actions but will instead report what actions would happen.

revdeploy NAME

This is exactly the same as conducting a revert of an action followed by a deploy of the same action.

update [INCS] [-d]

This will automatically deploy or revert as appropriate to make your system match the code. This will likely be the most common command you run.

If there are actions in the code that have not been deployed, these will be deployed. If there are actions that have been deployed that are no longer in the code, they will be reverted.

If there are actions that are in the code that have been deployed, but the "deploy" file has changed, then update will revert the previously deployed "deploy" file then deploy the new "deploy" file. (And note that the deployment will automatically call verify.)

You can optionally add one or more "INCS" strings to the update command to restrict the update to only perform operations that include one of the "INCS" in its action file. So for example, let's say you have a "db/changes" directory with some actions and a "etc/changes" directory with some actions. If you were to specify "db/changes" as one of your "INCS", this would only update actions from that directory tree.

Adding a "-d" flag to the command will cause a "dry run" to run, which will not perform any actions but will instead report what actions would happen.

version

Displays the current dest version.

help

Displays a synposis of commands and their usage.

man

Displays the man page for dest.

DEPENDENCIES

Sometimes you may have deployments that have dependencies on other deployments. For example, if you want to add a column to a table in a database, that table (and the database) have to exist already.

To define a dependency, place the action's name after a dest.prereq marker in the deploy action file. This will likely need to be in the form of a comment. (The comment marker can be whatever the language of the deployment file is.) For example, in a SQL file that adds a column, you might have:

-- dest.prereq: db/schema

Dependencies are defined only in deploy actions. Reverting infers its dependency tree from the dependencies defined in deploy actions, just in reverse.

WRAPPERS

Unless a "wrapper" is used (and thus, by default), dest will assume that the action files (those 3 files under each action name) are self-contained executable files. Often if not almost always the action sub-files would be a lot simpler and contain less code duplication if they were executed through some sort of wrapper.

Given our database example, we'd likely want each of the action sub-files to be pure SQL. In that case, we'll need to write some wrapper program that dest will run that will then consume and run the SQL files as appropriate.

dest looks for wrapper files up the chain from the location of the action file. Specifically, it'll assume a file is a wrapper if the filename is "dest.wrap". If such a file is found, then that file is called, and the name of the action sub-file is passed as its only argument.

As an example, let's say I created an action set that looked like this

example/
    ls/
        deploy
        revert
        verify

Let's then also say that the example/ls/deploy file contains: ls

I could create a deployment file example/dest.wrap that looked like this:

#!/bin/sh
/bin/sh "$1"

Wrappers will only ever be run from the current code. For example, if you have a revert file for some action and you checkout your working directory to a point in time prior to the revert file existing, dest maintains a copy of the original revert file so it can revert the action. However, it will always rely on whatever wrapper is in the current working directory.

The dest.wrap is called with two parameters: first, the name of the change program, and second, the action type ("deploy", "revert", "verify").

WATCH FILE

Optionally, you can elect to use a watch file that can be committed to your favorite revision control system. In the root directory of your project, create a filed called "dest.watch" and list therein the directories (relative to the root directory of the project) to watch.

If this "dest.watch" file exists in the root directory of your project, dest will add the following behavior:

During an "init" action, the dest.watch file will be read to setup all watched directories (as though you manually called the "add" action on each).

During a "status" action, dest will report any differences between your current watch list and the dest.watch file.

During an "update" action, dest will automatically add (as if you manually called the "add" action) each directory in the dest.watch file that is currently not watched by dest prior to executing the update action.

EXAMPLE SCENARIO

To help illustrate what dest can do, consider the following example scenario. You start a new project that requires the use of a typical database. You want to control the schema of that database with progressively executed SQL files. You also have data operations that require more functionality than what SQL can provide, so you'd like to have data operations handled by progressively executed Perl programs.

Project Initiation

You could setup your changes and dest as follows (starting in your project's root directory):

mkdir db data     # create the directories
dest init         # initiate dest for your project
dest add db data  # add the directories to the dest watch list
dest writewatch   # write the watch list (so others can init without adding)
dest status       # show the current status (which is everything is OK)

Create Schema Action

The next step would probably be to create your database schema as a dest action. Actions include deploy, verify, and revert files. You can use the "make" command to create these files for you. The command will return the list of files created, so you can wrap the command to your favorite editor.

dest make db/schema sql       # create "schema" action as ".sql" files
vi `dest list db/schema`      # list the "schema" files into vi
vi `dest make db/schema sql`  # the previous 2 commands as 1 command

Your deploy file will be the SQL required to create your schema. The revert file reverts what the deploy file deploys. The verify file needs to return some positive value if and only if the deploy action worked.

Since your local CLI shell probably doesn't know how to execute SQL files natively, you'll likely need to create a dest.wrap file.

touch db/dest.wrap && chmod u+x db/dest.wrap && vi db/dest.wrap

This file if it exists will get executed instead of the deploy, verify, and revert files, and it will be passed the action file being executed.

Status and Deploying

Now, check the project's dest status:

dest s  # short for "dest status"

You should see:

ok - data
diff - db
  + db/schema

This indicates that the "schema" action exists in your code but has not been executed on your environment. To execute, you have a couple options:

dest deploy db/schema  # explicitly deploy the "schema" action
dest update            # make dest do whatever status says needs to be done

If you run dest update and there's nothing to do, dest will happily do nothing. If you run dest deploy db/schema after having already deployed "schema", dest will complain that "schema" has already been deployed. If you really, really want to run a deploy of "schema" again:

dest redeploy db/schema  # deploy "schema" even if you already did

Changing a Deployed Action

If you discover you made a mistake in a table definition inside your "schema" deploy action file, you could either create a second action to change that table or change the "schema" deploy and "revdeploy" to revert the old "schema" deploy action and deploy the new "schema" deploy action. Let's alter the deploy action already created, then check status.

vi db/schema/deploy.sql  # fix the table definition
dest status

You should see something like:

ok - data
diff - db
  db/schema/deploy.sql
    M db/schema/deploy.sql

This indicates that the schema/deploy action is different than what was deployed. You can revert the action and deploy it with the "revert" and "deploy" actions, or do it in a single "revdeploy" command:

dest revert db/schema     # revert old action
dest deploy db/schema     # deploy new action
dest revdeploy db/schema  # revert old action and deploy new action

Action with a Dependency

Now let's create a data action, a Perl program that will do things and stuff to insert data into the database. To work, this action obviously will require the schema action to have already been deployed.

vi `dest make data/stuff pl`  # create the action and edit the files

Inside the data/stuff/deploy.pl file, include the following line:

# dest.prereq: db/schema

Other Developers

Now let's say you invite a friend or coworker to the project. That person might do something like this:

git clone https://example.com/example_scenario project
cd project
dest init    # initiates dest and sets up watches from the watch file
dest update  # brings the local environment

With the "update" command, dest will notice that the "db/schema" and "data/stuff" actions haven't been deployed. It'll also notice that "data/stuff" depends on "db/schema", so it'll deploy the schema before it deploys the data.

What's especially fun now is that this other developer can branch and do all sorts of work requiring dest actions in parallel to you doing other dest actions in parallel on different branches. If this new developer wants you to help test some changes, you just checkout the developer's branch and run a dest update. dest will revert whatever changes you have in your environment that don't exist in the other developer's environment, and will then deploy the other developer's new actions.

git checkout other_branch && dest update
prove t
git checkout my_branch && dest update

AUTHOR

Gryphon Shafer <gryphon@cpan.org>

COPYRIGHT AND LICENSE

This is free software, licensed under:

The Artistic License 2.0 (GPL Compatible)

To install App::Dest, copy and paste the appropriate command in to your terminal.

cpanm

cpanm App::Dest

CPAN shell

perl -MCPAN -e shell
install App::Dest

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

NAME

VERSION

SYNOPSIS

DESCRIPTION

COMMANDS

init

add DIR

rm DIR

watches

putwatch FILE

writewatch

make NAME [EXT]

expand NAME

list [FILTER]

prereqs [FILTER]

status

diff [NAME]

clean [NAME]

preinstall [NAME]

deploy NAME [-d]

verify [NAME]

revert NAME [-d]

redeploy NAME [-d]

revdeploy NAME

update [INCS] [-d]

version

help

man

DEPENDENCIES

WRAPPERS

WATCH FILE

EXAMPLE SCENARIO

Project Initiation

Create Schema Action

Status and Deploying

Changing a Deployed Action

Action with a Dependency

Other Developers

SEE ALSO

AUTHOR

COPYRIGHT AND LICENSE

Module Install Instructions