NAME

Win32API::Registry - Low-level access to Win32 system API calls from WINREG.H

SYNOPSIS

  use Win32API::Registry 0.21 qw( :ALL );

  RegOpenKeyEx( HKEY_LOCAL_MACHINE, "SYSTEM\\Disk", 0, KEY_READ, $key );
    or  die "Can't open HKEY_LOCAL_MACHINE\\SYSTEM\\Disk: ",
	    regLastError(),"\n";
  RegQueryValueEx( $key, "Information", [], $type, $data, [] );
    or  die "Can't read HKEY_L*MACHINE\\SYSTEM\\Disk\\Information: ",
	    regLastError(),"\n";
  [...]
  RegCloseKey( $key )
    or  die "Can't close HKEY_LOCAL_MACHINE\\SYSTEM\\Disk: ",
	    regLastError(),"\n";

DESCRIPTION

This provides fairly low-level access to the Win32 System API calls dealing with the Registry [mostly from WINREG.H]. This is mostly intended to be used by other modules such as Win32::TieRegistry [which provides an extremely Perl-friendly method for using the Registry].

For a description of the logical structure of the Registry, see the documentation for the Win32::TieRegistry module.

To pass in NULL as the pointer to an optional buffer, pass in an empty list reference, [].

Beyond raw access to the API calls and related constants, this module handles smart buffer allocation and translation of return codes.

All calls return a true value for success and a false value for failure. After any failure, $^E should automatically be set to indicate the reason. However, current versions of Perl often overwrite $^E too quickly, so you can use regLastError() instead, which is only set by Win32API::Registry routines. regLastError() is also good if you have a really old version of Perl that does not connect $^E to GetLastError() on Win32.

Note that $! is not set by these routines except by Win32API::Registry::constant() when a constant is not defined.

Exports

Nothing is exported by default. The following tags can be used to have sets of symbols exported.

[Note that much of the following documentation refers to the behavior of the underlying API calls which may vary in current and future versions of the Win32 API without any changes to this module. Therefore you should check the Win32 API documentation directly when needed.]

:Func

The basic function names:

AllowPriv

AllowPriv( $sPrivName, $bEnable )

Not a Win32 API call. Enables or disables a specific privilege for the current process. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure. This routine does not provide a way to tell if a privilege is currently enabled.

$sPrivname is a Win32 privilege name [see ":SE_"]. For example, "SeBackupPrivilege" [a.k.a. SE_BACKUP_NAME] controls whether you can use RegSaveKey() and "SeRestorePrivilege" [a.k.a. SE_RESTORE_NAME] controls whether you can use RegLoadKey().

If $bEnable is true, then AllowPriv() tries to enable the privilege. Otherwise it tries to disable the privilege.

AbortSystemShutdown

AbortSystemShutdown( $sComputerName )

Tries to abort a remote shutdown request previously made via InitiateSystemShutdown(). Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

InitiateSystemShutdown

InitiateSystemShutdown( $sComputer, $sMessage, $uTimeoutSecs, $bForce, $bReboot )

Requests that a [remote] computer be shutdown or rebooted. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$sComputer is the name [or address] of the computer to be shutdown or rebooted. You can use [] [for NULL] or "" to indicate the local computer.

$sMessage is the message to be displayed in a pop-up window on the desktop of the computer to be shutdown or rebooted until the timeout expires or the shutdown is aborted via AbortSystemShutdown(). With $iTimeoutSecs == 0, the message will never be visible.

$iTimeoutSecs is the number of seconds to wait before starting the shutdown.

If $bForce is false, then any applications running on the remote computer get a chance to prompt the remote user whether they want to save changes. Also, for any applications that do not exit quickly enough, the operating system will prompt the user whether they wish to wait longer for the application to exit or force it to exit now. At any of these prompts the user can press CANCEL to abort the shutdown but if no applications have unsaved data, they will likely all exit quickly and the shutdown will progress with the remote user having no option to cancel the shutdown.

If $bForce is true, all applications are told to exit immediately and so will not prompt the user even if there is unsaved data. Any applications that take too long to exit will be forcibly killed after a short time. The only way to abort the shutdown is to call AbortSystemShutdown() before the timeout expires and there is no way to abort the shutdown once it has begun.

If $bReboot is true, the computer will automatically reboot once the shutdown is complete. If $bReboot is false, then when the shutdown is complete the computer will halt at a screen indicating that the shutdown is complete and offering a way for the user to start to boot the computer.

You must have the "SeRemoteShutdownPrivilege" privilege on the remote computer for this call to succeed. If shutting down the local computer, then the calling process must have the "SeShutdownPrivilege" privilege and have it enabled.

RegCloseKey

RegCloseKey( $hKey )

Closes the handle to a Registry key returned by RegOpenKeyEx(), RegConnectRegistry(), RegCreateKeyEx(), or a few other routines. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

RegConnectRegistry

RegConnectRegistry( $sComputer, $hRootKey, $ohKey )

Connects to one of the root Registry keys of a remote computer. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$sComputer is the name [or address] of a remote computer whose Registry you wish to access.

$hKey must be either HKEY_LOCAL_MACHINE or HKEY_USERS and specifies which root Registry key on the remote computer you wish to have access to.

$phKey will be set to the handle to be used to access the remote Registry key if the call succeeds.

regConstant

$value= regConstant( $sConstantName )

Fetch the value of a constant. Returns undef if $sConstantName is not the name of a constant supported by this module. Never sets $! nor $^E.

This function is rarely used since you will usually get the value of a constant by having that constant imported into your package by listing the constant name in the use Win32API::Registry statement and then simply using the constant name in your code [perhaps followed by ()]. This function is useful for verifying constant names not in Perl code, for example, after prompting a user to type in a constant name.

RegCreateKey

RegCreateKey( $hKey, $sSubKey, $ohSubKey )

This routine is meant only for compatibility with Windows version 3.1. Use RegCreateKeyEx() instead.

RegCreateKeyEx

RegCreateKeyEx( $hKey, $sSubKey, $uZero, $sClass, $uOpts, $uAccess, $pSecAttr, $ohNewKey, $ouDisp )

Creates a new Registry subkey. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sSubKey is the name of the new subkey to be created.

$iZero is reserved for future use and should always be specified as 0.

$sClass is a string to be used as the class for the new subkey. We are not aware of any current use for Registry key class information so the empty string, "", should usually be used here.

$iOpts is a numeric value containing bits that control options used while creating the new subkey. REG_OPTION_NON_VOLATILE is the default. REG_OPTION_VOLATILE [which is ignored on Windows 95] means the data stored under this key is not kept in a file and will not be preserved when the system reboots. REG_OPTION_BACKUP_RESTORE [also ignored on Windows 95] means ignore the $iAccess parameter and try to open the new key with the access required to backup or restore the key.

$iAccess is a numeric mask of bits specifying what type of access is desired when opening the new subkey. See RegOpenKeyEx().

$pSecAttr is a SECURITY_ATTRIBUTES structure packed into a Perl string which controls whether the returned handle can be inherited by child processes. Normally you would pass [] for this parameter to have NULL passed to the underlying API indicating that the handle cannot be inherited. If not under Windows95, then $pSecAttr also allows you to specify SECURITY_DESCRIPTOR that controls which users will have what type of access to the new key -- otherwise the new key inherits its security from its parent key.

$phKey will be set to the handle to be used to access the new subkey if the call succeeds.

$piDisp will be set to either REG_CREATED_NEW_KEY or REG_OPENED_EXISTING_KEY to indicate for which reason the call succeeded. Can be specified as [] if you don't care.

If $phKey and $piDisp start out as integers, then they will probably remain unchanged if the call fails.

RegDeleteKey

RegDeleteKey( $hKey, $sSubKey )

Deletes a subkey of an open Registry key provided that the subkey contains no subkeys of its own [but the subkey may contain values]. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sSubKey is the name of the subkey to be deleted.

RegDeleteValue

RegDeleteValue( $hKey, $sValueName )

Deletes a value from an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sValueKey is the name of the value to be deleted.

RegEnumKey

RegEnumKey( $hKey, $uIndex, $osName, $ilNameSize )

This routine is meant only for compatibility with Windows version 3.1. Use RegEnumKeyEx() instead.

RegEnumKeyEx

RegEnumKeyEx( $hKey, $uIndex, $osName, $iolName, $pNull, $osClass, $iolClass, $opftLastWrite )

Lets you enumerate the names of all of the subkeys directly under an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$iIndex is the sequence number of the immediate subkey that you want information on. Start with this value as 0 then repeat the call incrementing this value each time until the call fails with $^E/regLastError() numerically equal to ERROR_NO_MORE_ITEMS.

$sName will be set to the name of the subkey. Can be [] if you don't care about the name.

$plName initially specifies the [minimum] buffer size to be allocated for $sName. Will be set to the length of the subkey name if the requested subkey exists even if $sName isn't successfully set to the subkey name. See "Buffer sizes" for more information.

$pNull is reserved for future used and should be passed as [].

$sClass will be set to the class name for the subkey. Can be [] if you don't care about the class.

$plClass initially specifies the [minimum] buffer size to be allocated for $sClass and will be set to the length of the subkey class name if the requested subkey exists. See "Buffer sizes" for more information.

$pftLastWrite will be set to a FILETIME structure packed into a Perl string and indicating when the subkey was last changed. Can be [].

You may omit both $plName and $plClass to get the same effect as passing in [] for each of them.

RegEnumValue

RegEnumValue( $hKey, $uIndex, $osValName, $iolValName, $pNull, $ouType, $opValData, $iolValData )

Lets you enumerate the names of all of the values contained in an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$iIndex is the sequence number of the value that you want information on. Start with this value as 0 then repeat the call incrementing this value each time until the call fails with ERROR_NO_MORE_ITEMS.

$sValName will be set to the name of the value. Can be [] if you don't care about the name.

$plValName initially specifies the [minimum] buffer size to be allocated for $sValName. Will be set to the length of the value name if the requested value exists even if $sValName isn't successfully set to the value name. See "Buffer sizes" for more information.

$pNull is reserved for future used and should be passed as [].

$piType will be set to the type of data stored in the value data. If the call succeeds, it will be set to a REG_* value unless passed in as [].

$pValData will be set to the data [packed into a Perl string] that is stored in the requested value. Can be [] if you don't care about the value data.

$plValData initially specifies the [minimum] buffer size to be allocated for $sValData and will be set to the length of the value data if the requested value exists. See "Buffer sizes" for more information.

You may omit both $plValName and $plValData to get the same effect as passing in [] for each of them.

RegFlushKey

RegFlushKey( $hKey )

Forces the data stored under an open Registry key to be flushed to the disk file where the data is preserved between reboots. Forced flushing is not guaranteed to be efficient so this routine should almost never be called. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

RegGetKeySecurity

RegGetKeySecurity( $hKey, $uSecInfo, $opSecDesc, $iolSecDesc )

Retrieves one of the SECURITY_DESCRIPTOR structures describing part of the security for an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$iSecInfo is a numeric SECURITY_INFORMATION value that specifies which parts of the SECURITY_DESCRIPTOR structure to retrieve. Should be OWNER_SECURITY_INFORMATION, GROUP_SECURITY_INFORMATION, DACL_SECURITY_INFORMATION, or or SACL_SECURITY_INFORMATION or two or more of these bits combined using |.

$pSecDesc will be set to the requested SECURITY_DESCRIPTOR structure [packed into a Perl string].

$plSecDesc initially specifies the [minimum] buffer size to be allocated for $sSecDesc and will be set to the length of the security descriptor. See "Buffer sizes" for more information. You may omit this parameter to get the same effect as passing in [] for it.

regLastError

$svError= regLastError();

regLastError( $uError );

Returns the last error encountered by a routine from this module. It is just like $^E except it isn't changed by anything except routines from this module. Ideally you could just use $^E, but current versions of Perl often overwrite $^E before you get a chance to check it and really old versions of Perl don't really support $^E under Win32.

Just like $^E, in a numeric context regLastError() returns the numeric error value while in a string context it returns a text description of the error [actually it returns a Perl scalar that contains both values so $x= regLastError() causes $x to give different values in string vs. numeric contexts]. On old versions of Perl where $^E isn't tied to GetLastError(), regLastError simply returns the number of the error and you'll need to use <Win32::FormatMessage> to get the error string.

The last form sets the error returned by future calls to regLastError() and should not be used often. $uError must be a numeric error code. Also returns the dual-valued version of $uError.

RegLoadKey

RegLoadKey( $hKey, $sSubKey, $sFileName )

Loads a hive file. That is, it creates a new subkey in the Registry and associates that subkey with a disk file that contains a Registry hive so that the new subkey can be used to access the keys and values stored in that hive. Hives are usually created via RegSaveKey(). Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key that can have hives loaded to it. This must be HKEY_LOCAL_MACHINE, HKEY_USERS, or a remote version of one of these from a call to RegConnectRegistry().

$sSubKey is the name of the new subkey to created and associated with the hive file.

$sFileName is the name of the hive file to be loaded. This file name is interpretted relative to the %SystemRoot%/System32/config directory on the computer where the $hKey key resides. If $sFileName is on a FAT file system, then its name must not have an extension.

You must have the SE_RESTORE_NAME privilege to use this routine.

WARNING: Loading of hive files via a network share may silently corrupt the hive and so should not be attempted [this is a problem in at least some versions of the underlying API which this module does not try to fix or avoid]. To access a hive file located on a remote computer, connect to the remote computer's Registry and load the hive via that.

RegNotifyChangeKeyValue

RegNotifyChangeKeyValue( $hKey, $bWatchSubtree, $uNotifyFilter, $hEvent, $bAsync )

Arranges for your process to be notified when part of the Registry is changed. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call] for which you wish to be notified when any changes are made to it.

If $bWatchSubtree is true, then changes to any subkey or descendant of $hKey are also reported.

$iNotifyFilter controllers what types of changes are reported. It is a numeric value containing one or more of the following bit masks:

REG_NOTIFY_CHANGE_NAME

Notify if a subkey is added or deleted to a monitored key.

REG_NOTIFY_CHANGE_LAST_SET

Notify if a value in a monitored key is added, deleted, or modified.

REG_NOTIFY_CHANGE_SECURITY

Notify if a security descriptor of a monitored key is changed.

REG_NOTIFY_CHANGE_ATTRIBUTES

Notify if any attributes of a monitored key are changed [class name or security descriptors].

$hEvent is ignored unless $bAsync is true. Otherwise, $hEvent is a handle to a Win32 event that will be signaled when changes are to be reported.

If $bAsync is true, then RegNotifyChangeKeyValue() returns immediately and uses $hEvent to notify your process of changes. If $bAsync is false, then RegNotifyChangeKeyValue() does not return until there is a change to be notified of.

This routine does not work with Registry keys on remote computers.

RegOpenKey

RegOpenKey( $hKey, $sSubKey, $ohSubKey )

This routine is meant only for compatibility with Windows version 3.1. Use RegOpenKeyEx() instead.

RegOpenKeyEx

RegOpenKeyEx( $hKey, $sSubKey, $uOptions, $uAccess, $ohSubKey )

Opens an existing Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sSubKey is the name of an existing subkey to be opened. Can be "" or [] to open an additional handle to the key specified by $hKey.

$iOptions is a numeric value containing bits that control options used while opening the subkey. There are currently no supported options so this parameter should be specified as 0.

$iAccess is a numeric mask of bits specifying what type of access is desired when opening the new subkey. Should be a combination of one or more of the following bit masks:

KEY_ALL_ACCESS

KEY_READ | KEY_WRITE | KEY_CREATE_LINK

KEY_READ

KEY_QUERY_VALUE | KEY_ENUMERATE_SUBKEYS | KEY_NOTIFY | STANDARD_RIGHTS_READ

KEY_WRITE

KEY_SET_VALUE | KEY_CREATE_SUB_KEY | STANDARD_RIGHTS_WRITE

KEY_QUERY_VALUE

KEY_SET_VALUE

KEY_ENUMERATE_SUB_KEYS

KEY_CREATE_SUB_KEY

KEY_NOTIFY

Allows you to use RegNotifyChangeKeyValue() on the opened key.

KEY_EXECUTE

Same as KEY_READ.

KEY_CREATE_LINK

Gives you permission to create a symbolic link like HKEY_CLASSES_ROOT and HKEY_CURRENT_USER, though the method for doing so is not documented [and probably requires use of the mostly undocumented "native" routines, Nt*() a.k.a. Zw*()].

$phKey will be set to the handle to be used to access the new subkey if the call succeeds.

RegQueryInfoKey

RegQueryInfoKey( $hKey, $osClass, $iolClass, $pNull, $ocSubKeys, $olSubKey, $olSubClass, $ocValues, $olValName, $olValData, $olSecDesc, $opftTime )

Gets miscellaneous information about an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sClass will be set to the class name for the key. Can be [] if you don't care about the class.

$plClass initially specifies the [minimum] buffer size to be allocated for $sClass and will be set to the length of the key's class name. See "Buffer sizes" for more information. You may omit this parameter to get the same effect as passing in [] for it.

$pNull is reserved for future use and should be passed as [].

$pcSubKeys will be set to the count of the number of subkeys directly under this key. Can be [].

$plSubKey will be set to the length of the longest subkey name. Can be [].

$plSubClass will be set to the length of the longest class name used with an immediate subkey of this key. Can be [].

$pcValues will be set to the count of the number of values in this key. Can be [].

$plValName will be set to the length of the longest value name in this key. Can be [].

$plValData will be set to the length of the longest value data in this key. Can be [].

$plSecDesc will be set to the length of this key's full security descriptor.

$pftTime will be set to a FILETIME structure packed into a Perl string and indicating when this key was last changed. Can be [].

RegQueryMultipleValues

RegQueryMultipleValues( $hKey, $ioarValueEnts, $icValueEnts, $opBuffer, $iolBuffer )

Allows you to use a single call to query several values from a single open Registry key to maximize efficiency. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$pValueEnts should contain a list of VALENT structures packed into a single Perl string. Each VALENT structure should have the ve_valuename entry [the first 4 bytes] pointing to a string containing the name of a value stored in this key. The remaining fields are set if the function succeeds.

$cValueEnts should contain the count of the number of VALENT structures contained in $pValueEnts.

$pBuffer will be set to the data from all of the requested values concatenated into a single Perl string.

$plBuffer initially specifies the [minimum] buffer size to be allocated for $sBuffer and will be set to the total length of the data to be written to $sBuffer. See "Buffer sizes" for more information. You may omit this parameter to get the same effect as passing in [] for it.

Here is sample code to populate $pValueEnts:

# @ValueNames= ...list of value name strings...;
$cValueEnts= @ValueNames;
$pValueEnts= pack( " p x4 x4 x4 " x $cValueEnts, @ValueNames );

Here is sample code to retrieve the data type and data length returned in $pValueEnts:

@Lengths= unpack( " x4 L x4 x4 " x $cValueEnts, $pValueEnts );
@Types=   unpack( " x4 x4 x4 L " x $cValueEnts, $pValueEnts );

Given the above, and assuming you haven't modified $sBuffer since the call, you can also extract the value data strings from $sBuffer by using the pointers returned in $pValueEnts:

@Data=    unpack(  join( "", map {" x4 x4 P$_ x4 "} @Lengths ),
		$pValueEnts  );

Much better is to use the lengths and extract directly from $sBuffer using unpack() [or substr()]:

@Data= unpack( join("",map("P$_",@Lengths)), $sBuffer );

RegQueryValue

RegQueryValue( $hKey, $sSubKey, $osValueData, $iolValueData )

This routine is meant only for compatibility with Windows version 3.1. Use RegQueryValueEx() instead. This routine can only query unamed values [a.k.a. "default values"], that is, values with a name of "".

RegQueryValueEx

RegQueryValueEx( $hKey, $sValueName, $pNull, $ouType, $opValueData, $iolValueData )

Lets you look up value data stored in an open Registry key by specifying the value name. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sValueName is the name of the value whose data you wish to retrieve.

$pNull this parameter is reserved for future use and should be specified as [].

$piType will be set to indicate what type of data is stored in the named value. Will be set to a REG_* value if the function succeeds.

$pValueData will be set to the value data [packed into a Perl string] that is stored in the named value. Can be [] if you don't care about the value data.

$plValueData initially specifies the [minimum] buffer size to be allocated for $sValueData and will be set to the size [always in bytes] of the data to be written to $sValueData, even if $sValueData is not successfully written to. See "Buffer sizes" for more information.

RegReplaceKey

RegReplaceKey( $hKey, $sSubKey, $sNewFile, $sOldFile )

Lets you replace an entire hive when the system is next booted. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key that has hive(s) loaded in it. This must be HKEY_LOCAL_MACHINE, HKEY_USERS, or a remote version of one of these from a call to RegConnectRegistry().

$sSubKey is the name of the subkey of $hKey whose hive you wish to have replaced on the next reboot.

$sNewFile is the name of a file that will replace the existing hive file when the system reboots.

$sOldFile is the file name to save the current hive file to when the system reboots.

$sNewFile and $sOldFile are interpretted relative to the %SystemRoot%/System32/config directory on the computer where the $hKey key resides [I think]. If either file is [would be] on a FAT file system, then its name must not have an extension.

You must have the SE_RESTORE_NAME privilege to use this routine.

RegRestoreKey

RegRestoreKey( $hKey, $sFileName, $uFlags )

Reads in a hive file and copies its contents over an existing Registry tree. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sFileName is the name of the hive file to be read. For each value and subkey in this file, a value or subkey will be added or replaced in $hKey.

$uFlags is usally 0. It can also be REG_WHOLE_HIVE_VOLATILE which, rather than copying the hive over the existing key, replaces the existing key with a temporary, memory-only Registry key and then copies the hive contents into it. This option only works if $hKey is HKEY_LOCAL_MACHINE, HKEY_USERS, or a remote version of one of these from a call to RegConnectRegistry().

RegRestoreKey does not delete values nor keys from the existing Registry tree when there is no corresponding value/key in the hive file.

RegSaveKey

RegSaveKey( $hKey, $sFileName, $pSecAttr )

Dumps any open Registry key and all of its subkeys and values into a new hive file. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sFileName is the name of the file that the Registry tree should be saved to. It is interpretted relative to the %SystemRoot%/System32/config directory on the computer where the $hKey key resides. If $sFileName is on a FAT file system, then it must not have an extension.

$pSecAttr contains a SECURITY_ATTRIBUTES structure that specifies the permissions to be set on the new file that is created. This can be [].

You must have the SE_RESTORE_NAME privilege to use this routine.

RegSetKeySecurity

RegSetKeySecurity( $hKey, $uSecInfo, $pSecDesc )

Sets [part of] the SECURITY_DESCRIPTOR structure describing part of the security for an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$uSecInfo is a numeric SECURITY_INFORMATION value that specifies which SECURITY_DESCRIPTOR structure to set. Should be OWNER_SECURITY_INFORMATION, GROUP_SECURITY_INFORMATION, DACL_SECURITY_INFORMATION, or SACL_SECURITY_INFORMATION or two or more of these bits combined using |.

$pSecDesc contains the new SECURITY_DESCRIPTOR structure packed into a Perl string.

RegSetValue

RegSetValue( $hKey, $sSubKey, $uType, $sValueData, $lValueData )

This routine is meant only for compatibility with Windows version 3.1. Use RegSetValueEx() instead. This routine can only set unamed values [a.k.a. "default values"].

RegSetValueEx

RegSetValueEx( $hKey, $sName, $uZero, $uType, $pData, $lData )

Adds or replaces a value in an open Registry key. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key [either HKEY_* or from a previous call].

$sName is the name of the value to be set.

$uZero is reserved for future use and should be specified as 0.

$uType is the type of data stored in $pData. It should be a REG_* value.

$pData is the value data packed into a Perl string.

$lData is the length of the value data that is stored in $pData. You will usually omit this parameter or pass in 0 to have length($pData) used. In both of these cases, if $iType is REG_SZ or REG_EXPAND_SZ, RegSetValueEx() will append a trailing '\0' to the end of $pData [unless there is already one].

RegUnLoadKey

RegUnLoadKey( $hKey, $sSubKey )

Unloads a previously loaded hive file. That is, closes the hive file then deletes the subkey that was providing access to it. Returns a true value if successful and a false value [and sets $^E/regLastError()] on failure.

$hKey is the handle to a Registry key that has hives loaded in it. This must be HKEY_LOCAL_MACHINE, HKEY_USERS, or a remote version of one of these from a call to RegConnectRegistry().

$sSubKey is the name of the subkey whose hive you wish to have unloaded.

:FuncA

The ASCII-specific function names.

Each of these is identical to the version listed above without the trailing "A":

AbortSystemShutdownA	InitiateSystemShutdownA
RegConnectRegistryA	RegCreateKeyA		RegCreateKeyExA
RegDeleteKeyA		RegDeleteValueA		RegEnumKeyA
RegEnumKeyExA		RegEnumValueA		RegLoadKeyA
RegOpenKeyA		RegOpenKeyExA		RegQueryInfoKeyA
RegQueryMultipleValuesA	RegQueryValueA		RegQueryValueExA
RegReplaceKeyA		RegRestoreKeyA		RegSaveKeyA
RegSetValueA		RegSetValueExA		RegUnLoadKeyA

:FuncW

The UNICODE-specific function names. These are the same as the versions listed above without the trailing "W" except that string parameters are UNICODE strings rather than ASCII strings, as indicated.

AbortSystemShutdownW

AbortSystemShutdownW( $swComputerName )

$swComputerName is UNICODE.

InitiateSystemShutdownW

InitiateSystemShutdownW( $swComputer, $swMessage, $uTimeoutSecs, $bForce, $bReboot )

$swComputer and $swMessage are UNICODE.

RegConnectRegistryW

RegConnectRegistryW( $swComputer, $hRootKey, $ohKey )

$swComputer is UNICODE.

RegCreateKeyW

RegCreateKeyW( $hKey, $swSubKey, $ohSubKey )

$swSubKey is UNICODE.

RegCreateKeyExW

RegCreateKeyExW( $hKey, $swSubKey, $uZero, $swClass, $uOpts, $uAccess, $pSecAttr, $ohNewKey, $ouDisp )

$swSubKey and $swClass are UNICODE.

RegDeleteKeyW

RegDeleteKeyW( $hKey, $swSubKey )

$swSubKey is UNICODE.

RegDeleteValueW

RegDeleteValueW( $hKey, $swValueName )

$swValueName is UNICODE.

RegEnumKeyW

RegEnumKeyW( $hKey, $uIndex, $oswName, $ilwNameSize )

$oswName is UNICODE and $ilwNameSize is measured as number of WCHARs.

RegEnumKeyExW

RegEnumKeyExW( $hKey, $uIndex, $oswName, $iolwName, $pNull, $oswClass, $iolwClass, $opftLastWrite )

$swName and $swClass are UNICODE and $iolwName and $iolwClass are measured as number of WCHARs.

RegEnumValueW

RegEnumValueW( $hKey, $uIndex, $oswName, $iolwName, $pNull, $ouType, $opData, $iolData )

$oswName is UNICODE and $iolwName is measured as number of WCHARs.

$opData is UNICODE if $piType is REG_SZ, REG_EXPAND_SZ, or REG_MULTI_SZ. Note that $iolData is measured as number of bytes even in these cases.

RegLoadKeyW

RegLoadKeyW( $hKey, $swSubKey, $swFileName )

$swSubKey and $swFileName are UNICODE.

RegOpenKeyW

RegOpenKeyW( $hKey, $swSubKey, $ohSubKey )

$swSubKey is UNICODE.

RegOpenKeyExW

RegOpenKeyExW( $hKey, $swSubKey, $uOptions, $uAccess, $ohSubKey )

$swSubKey is UNICODE.

RegQueryInfoKeyW

RegQueryInfoKeyW( $hKey, $oswClass, $iolwClass, $pNull, $ocSubKeys, $olwSubKey, $olwSubClass, $ocValues, $olwValName, $olValData, $olSecDesc, $opftTime )

$swClass is UNICODE. $iolwClass, $olwSubKey, $olwSubClass, and $olwValName are measured as number of WCHARs. Note that $olValData is measured as number of bytes.

RegQueryMultipleValuesW

RegQueryMultipleValuesW( $hKey, $ioarValueEnts, $icValueEnts, $opBuffer, $iolBuffer )

The ve_valuename fields of the VALENT [actually VALENTW] structures in $ioarValueEnts are UNICODE. Values of type REG_SZ, REG_EXPAND_SZ, and REG_MULTI_SZ are written to $opBuffer in UNICODE. Note that $iolBuffer and the ve_valuelen fields of the VALENT [VALENTW] structures are measured as number of bytes.

RegQueryValueW

RegQueryValueW( $hKey, $swSubKey, $oswValueData, $iolValueData )

$swSubKey and $oswValueData are UNICODE. Note that $iolValueData is measured as number of bytes.

RegQueryValueExW

RegQueryValueExW( $hKey, $swName, $pNull, $ouType, $opData, $iolData )

$swName is UNICODE.

$opData is UNICODE if $ouType is REG_SZ, REG_EXPAND_SZ, or REG_MULTI_SZ. Note that $iolData is measured as number of bytes even in these cases.

RegReplaceKeyW

RegReplaceKeyW( $hKey, $swSubKey, $swNewFile, $swOldFile )

$swSubKey, $swNewFile, and $swOldFile are UNICODE.

RegRestoreKeyW

RegRestoreKeyW( $hKey, $swFileName, $uFlags )

$swFileName is UNICODE.

RegSaveKeyW

RegSaveKeyW( $hKey, $swFileName, $pSecAttr )

$swFileName is UNICODE.

RegSetValueW

RegSetValueW( $hKey, $swSubKey, $uType, $swValueData, $lValueData )

$swSubKey and $swValueData are UNICODE. Note that $lValueData is measured as number of bytes even though $swValueData is always UNICODE.

RegSetValueExW

RegSetValueExW( $hKey, $swName, $uZero, $uType, $pData, $lData )

$swName is UNICODE.

$pData is UNICODE if $uType is REG_SZ, REG_EXPAND_SZ, or REG_MULTI_SZ. Note that $lData is measured as number of bytes even in these cases.

RegUnLoadKeyW

RegUnLoadKeyW( $hKey, $swSubKey )

$swSubKey is UNICODE.

:HKEY_

All HKEY_* constants:

HKEY_CLASSES_ROOT	HKEY_CURRENT_CONFIG	HKEY_CURRENT_USER
HKEY_DYN_DATA		HKEY_LOCAL_MACHINE	HKEY_PERFORMANCE_DATA
HKEY_USERS

:KEY_

All KEY_* constants:

KEY_QUERY_VALUE		KEY_SET_VALUE		KEY_CREATE_SUB_KEY
KEY_ENUMERATE_SUB_KEYS	KEY_NOTIFY		KEY_CREATE_LINK
KEY_READ		KEY_WRITE		KEY_EXECUTE
KEY_ALL_ACCESS

:REG_

All REG_* constants:

REG_CREATED_NEW_KEY		REG_OPENED_EXISTING_KEY

REG_LEGAL_CHANGE_FILTER		REG_NOTIFY_CHANGE_ATTRIBUTES
REG_NOTIFY_CHANGE_NAME		REG_NOTIFY_CHANGE_LAST_SET
REG_NOTIFY_CHANGE_SECURITY	REG_LEGAL_OPTION

REG_OPTION_BACKUP_RESTORE	REG_OPTION_CREATE_LINK
REG_OPTION_NON_VOLATILE		REG_OPTION_OPEN_LINK
REG_OPTION_RESERVED		REG_OPTION_VOLATILE

REG_WHOLE_HIVE_VOLATILE		REG_REFRESH_HIVE
REG_NO_LAZY_FLUSH

REG_NONE			REG_SZ
REG_EXPAND_SZ			REG_BINARY
REG_DWORD			REG_DWORD_LITTLE_ENDIAN
REG_DWORD_BIG_ENDIAN		REG_LINK
REG_MULTI_SZ			REG_RESOURCE_LIST
REG_FULL_RESOURCE_DESCRIPTOR	REG_RESOURCE_REQUIREMENTS_LIST

:ALL

All of the above.

:SE_

The strings for the following privilege names:

SE_ASSIGNPRIMARYTOKEN_NAME	SE_AUDIT_NAME
SE_BACKUP_NAME			SE_CHANGE_NOTIFY_NAME
SE_CREATE_PAGEFILE_NAME		SE_CREATE_PERMANENT_NAME
SE_CREATE_TOKEN_NAME		SE_DEBUG_NAME
SE_INCREASE_QUOTA_NAME		SE_INC_BASE_PRIORITY_NAME
SE_LOAD_DRIVER_NAME		SE_LOCK_MEMORY_NAME
SE_MACHINE_ACCOUNT_NAME		SE_PROF_SINGLE_PROCESS_NAME
SE_REMOTE_SHUTDOWN_NAME		SE_RESTORE_NAME
SE_SECURITY_NAME		SE_SHUTDOWN_NAME
SE_SYSTEMTIME_NAME		SE_SYSTEM_ENVIRONMENT_NAME
SE_SYSTEM_PROFILE_NAME		SE_TAKE_OWNERSHIP_NAME
SE_TCB_NAME			SE_UNSOLICITED_INPUT_NAME

It can be difficult to successfully build this module in a way that makes these constants available. So some builds of this module may not make them available. For such builds, trying to export any of these constants will cause a fatal error. For this reason, none of these symbols are currently included in the ":ALL" grouping.

The Win32API:: heirarchy

This and the other Win32API:: modules are meant to expose the nearly raw API calls so they can be used from Perl code in any way they might be used from C code. This provides the following advantages:

Many modules can be written by people that don't have a C compiler.

Encourages more module code to be written in Perl [not C].

Perl code is often much easier to inspect, debug, customize, and enhance than XS code.

Allows those already familiar with the Win32 API to get off to a quick start.

Provides an interactive tool for exploring even obscure details of the Win32 API.

It can be very useful to interactively explore ad-hoc calls into parts of the Win32 API using:

perl -de 0

Ensures that native Win32 data structures can be used.

This allows maximum efficiency. It also allows data from one module [for example, time or security information from the Win32API::Registry or Win32API::File modules] to be used with other modules [for example, Win32API::Time and Win32API::SecDesc].

Provides a single version of the XS interface to each API call where improvements can be collected.

Buffer sizes

For each parameter that specifies a buffer size, a value of 0 can be passed. For parameter that are pointers to buffer sizes, you can also pass in NULL by specifying an empty list reference, []. Both of these cases will ensure that the variable has E<some> buffer space allocated to it and pass in that buffer's allocated size. Many of the calls indicate, via ERROR_MORE_DATA, that the buffer size was not sufficient and the Registry.xs code will automatically enlarge the buffer to the required size and repeat the call.

Numeric buffer sizes are used as minimum initial sizes for the buffers. The larger of this size and the size of space already allocated to the scalar will be passed to the underlying routine. If that size was insufficient, and the underlying call provides an easy method for determining the needed buffer size, then the buffer will be enlarged and the call repeated as above.

The underlying calls define buffer size parameter as unsigned, so negative buffer sizes are treated as very large positive buffer sizes which usually cause malloc() to fail.

To force the Registry.xs code to pass in a specific value for a buffer size, preceed the size with an equals sign via "=".. Buffer sizes that are passed in as strings starting with an equals sign will have the equal sign stripped and the remainder of the string interpretted as a number [via C's strtoul() using only base 10] which will be passed to the underlying routine [even if the allocated buffer is actually larger]. The Registry.xs code will enlarge the buffer to the specified size, if needed, but will not enlarge the buffer based on the underlying routine requesting more space.

Some Reg*() calls may not currently set the buffer size when they return ERROR_MORE_DATA. But some that are not documented as doing so, currently do so anyway. So the code assumes that any routine E<might> do this and resizes any buffers and repeats the call. We hope that eventually all routines will provide this feature.

When you use [] for a buffer size, you can still find the length of the data returned by using length($buffer). Note that this length will be in bytes while a few of the buffer sizes would have been in units of wide characters.

Note that the RegQueryValueEx*() and RegEnumValue*() calls will trim the trailing '\0' [if present] from the returned data values of type REG_SZ or REG_EXPAND_SZ but only if the value data length parameter is omitted [or specified as []].

The RegSetValueEx*() calls will add a trailing '\0' [if missing] to the supplied data values of type REG_SZ and REG_EXPAND_SZ but only if the value data length parameter is omitted [or specified as 0].

Hungarian Notation

The following abbreviations are used at the start of each parameter name to hint at aspects of how the parameter is used. The prefix is always in lower case and followed by a capital letter that starts the descriptive part of the parameter name. Several of the following abbreviations can be combined into a single prefix.

Probably not all of these prefix notations are used by this module. This document section may be included in any Win32API module and so covers some notations not used by this specific module.

s

A string. In C, a '\0'-terminated char *. In Perl, just a string except that it will be truncated at the first "\0", if it contains one.

sw

A wide [UNICODE] string. In C, a L'\0'-terminated WCHAR *. In Perl, a string that contains UNICODE data. You can convert a string to UNICODE in Perl via:

$string= "This is an example string";
$unicode= pack( "S*", unpack("C*",$string), 0 );

Note how , 0 above causes an explicit L'\0' to be added since Perl's implicit '\0' that it puts after each of its strings is not wide enough to terminate a UNICODE string. So UNICODE strings are different than regular strings in that the Perl version of a regular string will not include the trialing '\0' while the Perl version of a UNICODE string must include the trailing L'\0'.

If a UNICODE string contains no non-ASCII characters, then you can convert it back into a normal string via:

$string= pack( "C*", unpack("S*",$unicode) );
$string =~ s/\0$//;

p

A pointer to some buffer [usually containing some struct]. In C, a void * or some other pointer type. In Perl, a string that is usually manipulated using pack and unpack. The "p" is usually followed by more prefix character(s) to indicate what type of data is stored in the bufffer.

a

A packed array. In C, an array [usually of structs]. In Perl, a string containing the packed data. The "a" is usually followed by more prefix character(s) to indicate the data type of the elements.

These packed arrays are also called "vectors" in places to avoid confusion with Perl arrays.

n

A generic number. In C, any of the integer or floating point data types. In Perl, a number; either an integer, unsigned, or double [IV, UV, or NV, respectively]. Usually an integer.

iv

A signed integral value. In C, any of the signed integer data types. In Perl, an integer [IV].

u

An unsigned integral value. In C, any of the unsigned integer data types. In Perl, an unsigned integer [UV].

d

A floating-point number. In C, a float or double or, perhaps, a long double. In Perl, a double-precision floating-point number [NV].

b

A Boolean value. In C, any integer data type, though usually via a type alias of bool or BOOL, containing either a 0 [false] or non-zero [true] value. In Perl, a scalar containing a Boolean value [0, "", or undef for "false" and anything else for "true"].

c

A count of items. In C, any integer data type. In Perl, an unsigned integer [UV]. Usually used in conjunction with a "vector" parameter [see "a" above] to indicate the number of elements.

l

A length [in bytes]. In C, any integer data type. In Perl, an unsigned integer [UV]. Usually used in conjunction with a "string" or "pointer" parameter [see "s" and "p" above] to indicate the buffer size or the size of the value stored in the buffer.

For strings, there is no general rule as to whether the trailing '\0' is included in such sizes. For this reason, the Win32API modules follow the Perl rule of always allocating one extra byte and reporting buffer sizes as being one smaller than allocated in case the '\0' is not included in the size.

lw

A length measured as number of UNICODE characters. In C, a count of WCHARs. In Perl, an unsigned integer [UV] counting "shorts" [see "s" and "S" in pack and unpack].

For UNICODE strings, the trailing L'\0' may or may not be included in a length so, again, we always allocate extra room for one and don't report that extra space.

h

A handle. In C, a HANDLE or more-specific handle data type. In Perl, an unsigned integer [UV]. In C, these handles are often actually some type of pointer, but Perl just treats them as opaque numbers, as it should. This prefix is also used for other pointers that are treated as integers in Perl code.

r

A record. In C, almost always a struct or perhaps union. Note that C structs are rarely passed by value so the "r" is almost always preceeded by a "p" or "a" [see "p" and "a" above]. For the very rare unadorned "r", Perl stores the record in the same way as a "pr", that is, in a string. For the very rare case where Perl explicitly stores a pointer to the struct rather than storing the struct directly in a Perl string, the prefix "pp" or "ppr" or even "par" is used.

sv

rv

hv

av

cv

A Perl data type. Respectively, a scalar value [SV], a reference [RV] [usually to a scalar], a hash [HV], a Perl array [AV], or a Perl code reference [PVCV]. For the "hv", "av", and "cv" prefixes, a leading "rv" is usually assumed. For a parameter to an XS subroutine, a prefix of "sv" means the parameter is a scalar and so may be a string or a number [or undef] or even both at the same time. So "sv" doesn't imply a leading "rv".

Input or Output

Whether a parameter is for input data, output data, or both is usually not reflected by the data type prefix. In cases where this is not obvious nor reflected in the parameter name proper, we may use the following in front of the data type prefix.

i

An input parameter given to the API [usually omitted].

o

An output-only parameter taken from the API. You should not get a warning if such a parameter is undef when you pass it into the function. You should get an error if such a parameter is read-only. You can [usually] pass in [] for such a parameter to have the parameter silently ignored.

The output may be written directly into the Perl variable passed to the subroutine, the same way the buffer parameter to Perl's sysread(). This method is often avoided in Perl because the call then lacks any visual cue that some parameters are being overwritten. But this method closely matches the C API which is what we are trying to do.

io

Input given to the API then overwritten with output taken from the API. You should get a warning [if -w is in effect] if such a parameter is undef when you pass it into the function [unless it is a buffer or buffer length parameter]. If the value is read-only, then [for most parameters] the output is silently not written. This is because it is often convenient to pass in read-only constants for many such parameters. You can also usually pass in [] for such parameters.

pp

ppr

par

pap

These are just unusual combinations of prefix characters described above.

For each, a pointer is stored in a [4-byte] Perl string. You can usually use unpack "P" to access the real data from Perl.

For "ppr" [and often for "pp"], the pointer points directly at a C struct. For "par", the pointer points to the first element of a C [packed] array of structs. For "pap", the pointer points to a C [packed] array of pointers to other things.

ap

Here we have a list of pointers packed into a single Perl string.

BUGS

The old ActiveState ports of Perl for Win32 [but not, ActivePerl, the ActiveState distributions of standard Perl 5.004 and beyond] do not support the tools for building extensions and so do not support this extension.

No routines are provided for using the data returned in the FILETIME buffers. Those are in the Win32API::Time module.

No routines are provided for dealing with UNICODE data effectively. See ":FuncW" above for some simple-minded UNICODE methods.

Parts of the module test will fail if used on a version of Perl that does not yet set $^E based on GetLastError().

On NT 4.0 [at least], the RegEnum*() calls do not set the required buffer sizes when returning ERROR_MORE_DATA so this module will not grow the buffers in such cases. Win32::TieRegistry overcomes this by using values from RegQueryInfoKey() for buffer sizes in RegEnum* calls.

On NT 4.0 [at least], RegQueryInfoKey() on HKEY_PERFORMANCE_DATA never succeeds. Also, RegQueryValueEx() on HKEY_PERFORMANCE_DATA never returns the required buffer size. To access HKEY_PERFORMANCE_DATA you will need to keep growing the data buffer until the call succeeds.

Because goto &subroutine seems to be buggy under Win32 Perl, it is not used in the stubs in Registry.pm.

AUTHOR

Tye McQueen, tye@metronet.com, http://www.metronet.com/~tye/.

SEE ALSO

Win32::TieRegistry

Win32::Registry

cpanm Win32

perl -MCPAN -e shell
install Win32