/ 
perl-5.6.1-TRIAL2
River stage five • 11849 direct dependents • 33721 total dependents
/ pod/perlport.pod

NAME

perlport - Writing portable Perl

DESCRIPTION

Perl runs on numerous operating systems. While most of them share much in common, they also have their own unique features.

This document is meant to help you to find out what constitutes portable Perl code. That way once you make a decision to write portably, you know where the lines are drawn, and you can stay within them.

There is a tradeoff between taking full advantage of one particular type of computer and taking advantage of a full range of them. Naturally, as you broaden your range and become more diverse, the common factors drop, and you are left with an increasingly smaller area of common ground in which you can operate to accomplish a particular task. Thus, when you begin attacking a problem, it is important to consider under which part of the tradeoff curve you want to operate. Specifically, you must decide whether it is important that the task that you are coding have the full generality of being portable, or whether to just get the job done right now. This is the hardest choice to be made. The rest is easy, because Perl provides many choices, whichever way you want to approach your problem.

Looking at it another way, writing portable code is usually about willfully limiting your available choices. Naturally, it takes discipline and sacrifice to do that. The product of portability and convenience may be a constant. You have been warned.

Be aware of two important points:

Not all Perl programs have to be portable

There is no reason you should not use Perl as a language to glue Unix tools together, or to prototype a Macintosh application, or to manage the Windows registry. If it makes no sense to aim for portability for one reason or another in a given program, then don't bother.

Nearly all of Perl already is portable

Don't be fooled into thinking that it is hard to create portable Perl code. It isn't. Perl tries its level-best to bridge the gaps between what's available on different platforms, and all the means available to use those features. Thus almost all Perl code runs on any machine without modification. But there are some significant issues in writing portable code, and this document is entirely about those issues.

Here's the general rule: When you approach a task commonly done using a whole range of platforms, think about writing portable code. That way, you don't sacrifice much by way of the implementation choices you can avail yourself of, and at the same time you can give your users lots of platform choices. On the other hand, when you have to take advantage of some unique feature of a particular platform, as is often the case with systems programming (whether for Unix, Windows, Mac OS, VMS, etc.), consider writing platform-specific code.

When the code will run on only two or three operating systems, you may need to consider only the differences of those particular systems. The important thing is to decide where the code will run and to be deliberate in your decision.

The material below is separated into three main sections: main issues of portability ("ISSUES", platform-specific issues ("PLATFORMS", and built-in perl functions that behave differently on various ports ("FUNCTION IMPLEMENTATIONS".

This information should not be considered complete; it includes possibly transient information about idiosyncrasies of some of the ports, almost all of which are in a state of constant evolution. Thus, this material should be considered a perpetual work in progress (<IMG SRC="yellow_sign.gif" ALT="Under Construction">).

ISSUES

Newlines

In most operating systems, lines in files are terminated by newlines. Just what is used as a newline may vary from OS to OS. Unix traditionally uses \012, one type of DOSish I/O uses \015\012, and Mac OS uses \015.

Perl uses \n to represent the "logical" newline, where what is logical may depend on the platform in use. In MacPerl, \n always means \015. In DOSish perls, \n usually means \012, but when accessing a file in "text" mode, STDIO translates it to (or from) \015\012, depending on whether you're reading or writing. Unix does the same thing on ttys in canonical mode. \015\012 is commonly referred to as CRLF.

Because of the "text" mode translation, DOSish perls have limitations in using seek and tell on a file accessed in "text" mode. Stick to seek-ing to locations you got from tell (and no others), and you are usually free to use seek and tell even in "text" mode. Using seek or tell or other file operations may be non-portable. If you use binmode on a file, however, you can usually seek and tell with arbitrary values in safety.

A common misconception in socket programming is that \n eq \012 everywhere. When using protocols such as common Internet protocols, \012 and \015 are called for specifically, and the values of the logical \n and \r (carriage return) are not reliable.

print SOCKET "Hi there, client!\r\n";      # WRONG
print SOCKET "Hi there, client!\015\012";  # RIGHT

However, using \015\012 (or \cM\cJ, or \x0D\x0A) can be tedious and unsightly, as well as confusing to those maintaining the code. As such, the Socket module supplies the Right Thing for those who want it.

use Socket qw(:DEFAULT :crlf);
print SOCKET "Hi there, client!$CRLF"      # RIGHT

When reading from a socket, remember that the default input record separator $/ is \n, but robust socket code will recognize as either \012 or \015\012 as end of line:

while (<SOCKET>) {
    # ...
}

Because both CRLF and LF end in LF, the input record separator can be set to LF and any CR stripped later. Better to write:

use Socket qw(:DEFAULT :crlf);
local($/) = LF;      # not needed if $/ is already \012

while (<SOCKET>) {
    s/$CR?$LF/\n/;   # not sure if socket uses LF or CRLF, OK
#   s/\015?\012/\n/; # same thing
}

This example is preferred over the previous one--even for Unix platforms--because now any \015's (\cM's) are stripped out (and there was much rejoicing).

Similarly, functions that return text data--such as a function that fetches a web page--should sometimes translate newlines before returning the data, if they've not yet been translated to the local newline representation. A single line of code will often suffice:

$data =~ s/\015?\012/\n/g;
return $data;

Some of this may be confusing. Here's a handy reference to the ASCII CR and LF characters. You can print it out and stick it in your wallet.

LF  ==  \012  ==  \x0A  ==  \cJ  ==  ASCII 10
CR  ==  \015  ==  \x0D  ==  \cM  ==  ASCII 13

         | Unix | DOS  | Mac  |
    ---------------------------
    \n   |  LF  |  LF  |  CR  |
    \r   |  CR  |  CR  |  LF  |
    \n * |  LF  | CRLF |  CR  |
    \r * |  CR  |  CR  |  LF  |
    ---------------------------
    * text-mode STDIO

The Unix column assumes that you are not accessing a serial line (like a tty) in canonical mode. If you are, then CR on input becomes "\n", and "\n" on output becomes CRLF.

These are just the most common definitions of \n and \r in Perl. There may well be others.

Numbers endianness and Width

Different CPUs store integers and floating point numbers in different orders (called endianness) and widths (32-bit and 64-bit being the most common today). This affects your programs when they attempt to transfer numbers in binary format from one CPU architecture to another, usually either "live" via network connection, or by storing the numbers to secondary storage such as a disk file or tape.

Conflicting storage orders make utter mess out of the numbers. If a little-endian host (Intel, VAX) stores 0x12345678 (305419896 in decimal), a big-endian host (Motorola, Sparc, PA) reads it as 0x78563412 (2018915346 in decimal). Alpha and MIPS can be either: Digital/Compaq used/uses them in little-endian mode; SGI/Cray uses them in big-endian mode. To avoid this problem in network (socket) connections use the pack and unpack formats n and N, the "network" orders. These are guaranteed to be portable.

You can explore the endianness of your platform by unpacking a data structure packed in native format such as:

print unpack("h*", pack("s2", 1, 2)), "\n";
# '10002000' on e.g. Intel x86 or Alpha 21064 in little-endian mode
# '00100020' on e.g. Motorola 68040

If you need to distinguish between endian architectures you could use either of the variables set like so:

$is_big_endian   = unpack("h*", pack("s", 1)) =~ /01/;
$is_little_endian = unpack("h*", pack("s", 1)) =~ /^1/;

Differing widths can cause truncation even between platforms of equal endianness. The platform of shorter width loses the upper parts of the number. There is no good solution for this problem except to avoid transferring or storing raw binary numbers.

One can circumnavigate both these problems in two ways. Either transfer and store numbers always in text format, instead of raw binary, or else consider using modules like Data::Dumper (included in the standard distribution as of Perl 5.005) and Storable. Keeping all data as text significantly simplifies matters.

Files and Filesystems

Most platforms these days structure files in a hierarchical fashion. So, it is reasonably safe to assume that all platforms support the notion of a "path" to uniquely identify a file on the system. How that path is really written, though, differs considerably.

Although similar, file path specifications differ between Unix, Windows, Mac OS, OS/2, VMS, VOS, RISC OS, and probably others. Unix, for example, is one of the few OSes that has the elegant idea of a single root directory.

DOS, OS/2, VMS, VOS, and Windows can work similarly to Unix with / as path separator, or in their own idiosyncratic ways (such as having several root directories and various "unrooted" device files such NIL: and LPT:).

Mac OS uses : as a path separator instead of /.

The filesystem may support neither hard links (link) nor symbolic links (symlink, readlink, lstat).

The filesystem may support neither access timestamp nor change timestamp (meaning that about the only portable timestamp is the modification timestamp), or one second granularity of any timestamps (e.g. the FAT filesystem limits the time granularity to two seconds).

VOS perl can emulate Unix filenames with / as path separator. The native pathname characters greater-than, less-than, number-sign, and percent-sign are always accepted.

RISC OS perl can emulate Unix filenames with / as path separator, or go native and use . for path separator and : to signal filesystems and disk names.

If all this is intimidating, have no (well, maybe only a little) fear. There are modules that can help. The File::Spec modules provide methods to do the Right Thing on whatever platform happens to be running the program.

use File::Spec::Functions;
chdir(updir());        # go up one directory
$file = catfile(curdir(), 'temp', 'file.txt');
# on Unix and Win32, './temp/file.txt'
# on Mac OS, ':temp:file.txt'
# on VMS, '[.temp]file.txt'

File::Spec is available in the standard distribution as of version 5.004_05. File::Spec::Functions is only in File::Spec 0.7 and later, and some versions of perl come with version 0.6. If File::Spec is not updated to 0.7 or later, you must use the object-oriented interface from File::Spec (or upgrade File::Spec).

In general, production code should not have file paths hardcoded. Making them user-supplied or read from a configuration file is better, keeping in mind that file path syntax varies on different machines.

This is especially noticeable in scripts like Makefiles and test suites, which often assume / as a path separator for subdirectories.

Also of use is File::Basename from the standard distribution, which splits a pathname into pieces (base filename, full path to directory, and file suffix).

Even when on a single platform (if you can call Unix a single platform), remember not to count on the existence or the contents of particular system-specific files or directories, like /etc/passwd, /etc/sendmail.conf, /etc/resolv.conf, or even /tmp/. For example, /etc/passwd may exist but not contain the encrypted passwords, because the system is using some form of enhanced security. Or it may not contain all the accounts, because the system is using NIS. If code does need to rely on such a file, include a description of the file and its format in the code's documentation, then make it easy for the user to override the default location of the file.

Don't assume a text file will end with a newline. They should, but people forget.

Do not have two files of the same name with different case, like test.pl and Test.pl, as many platforms have case-insensitive filenames. Also, try not to have non-word characters (except for .) in the names, and keep them to the 8.3 convention, for maximum portability, onerous a burden though this may appear.

Likewise, when using the AutoSplit module, try to keep your functions to 8.3 naming and case-insensitive conventions; or, at the least, make it so the resulting files have a unique (case-insensitively) first 8 characters.

Whitespace in filenames is tolerated on most systems, but not all. Many systems (DOS, VMS) cannot have more than one . in their filenames.

Don't assume > won't be the first character of a filename. Always use < explicitly to open a file for reading, unless you want the user to be able to specify a pipe open.

open(FILE, "< $existing_file") or die $!;

If filenames might use strange characters, it is safest to open it with sysopen instead of open. open is magic and can translate characters like >, <, and |, which may be the wrong thing to do. (Sometimes, though, it's the right thing.)

System Interaction

Not all platforms provide a command line. These are usually platforms that rely primarily on a Graphical User Interface (GUI) for user interaction. A program requiring a command line interface might not work everywhere. This is probably for the user of the program to deal with, so don't stay up late worrying about it.

Some platforms can't delete or rename files held open by the system. Remember to close files when you are done with them. Don't unlink or rename an open file. Don't tie or open a file already tied or opened; untie or close it first.

Don't open the same file more than once at a time for writing, as some operating systems put mandatory locks on such files.

Don't count on a specific environment variable existing in %ENV. Don't count on %ENV entries being case-sensitive, or even case-preserving. Don't try to clear %ENV by saying %ENV = ();, or, if you really have to, make it conditional on $^O ne 'VMS' since in VMS the %ENV table is much more than a per-process key-value string table.

Don't count on signals or %SIG for anything.

Don't count on filename globbing. Use opendir, readdir, and closedir instead.

Don't count on per-program environment variables, or per-program current directories.

Don't count on specific values of $!.

Interprocess Communication (IPC)

In general, don't directly access the system in code meant to be portable. That means, no system, exec, fork, pipe, ``, qx//, open with a |, nor any of the other things that makes being a perl hacker worth being.

Commands that launch external processes are generally supported on most platforms (though many of them do not support any type of forking). The problem with using them arises from what you invoke them on. External tools are often named differently on different platforms, may not be available in the same location, might accept different arguments, can behave differently, and often present their results in a platform-dependent way. Thus, you should seldom depend on them to produce consistent results. (Then again, if you're calling netstat -a, you probably don't expect it to run on both Unix and CP/M.)

One especially common bit of Perl code is opening a pipe to sendmail:

    open(MAIL, '|/usr/lib/sendmail -t') 
	or die "cannot fork sendmail: $!";

This is fine for systems programming when sendmail is known to be available. But it is not fine for many non-Unix systems, and even some Unix systems that may not have sendmail installed. If a portable solution is needed, see the various distributions on CPAN that deal with it. Mail::Mailer and Mail::Send in the MailTools distribution are commonly used, and provide several mailing methods, including mail, sendmail, and direct SMTP (via Net::SMTP) if a mail transfer agent is not available. Mail::Sendmail is a standalone module that provides simple, platform-independent mailing.

The Unix System V IPC (msg*(), sem*(), shm*()) is not available even on all Unix platforms.

The rule of thumb for portable code is: Do it all in portable Perl, or use a module (that may internally implement it with platform-specific code, but expose a common interface).

External Subroutines (XS)

XS code can usually be made to work with any platform, but dependent libraries, header files, etc., might not be readily available or portable, or the XS code itself might be platform-specific, just as Perl code might be. If the libraries and headers are portable, then it is normally reasonable to make sure the XS code is portable, too.

A different type of portability issue arises when writing XS code: availability of a C compiler on the end-user's system. C brings with it its own portability issues, and writing XS code will expose you to some of those. Writing purely in Perl is an easier way to achieve portability.

Standard Modules

In general, the standard modules work across platforms. Notable exceptions are the CPAN module (which currently makes connections to external programs that may not be available), platform-specific modules (like ExtUtils::MM_VMS), and DBM modules.

There is no one DBM module available on all platforms. SDBM_File and the others are generally available on all Unix and DOSish ports, but not in MacPerl, where only NBDM_File and DB_File are available.

The good news is that at least some DBM module should be available, and AnyDBM_File will use whichever module it can find. Of course, then the code needs to be fairly strict, dropping to the greatest common factor (e.g., not exceeding 1K for each record), so that it will work with any DBM module. See AnyDBM_File for more details.

Time and Date

The system's notion of time of day and calendar date is controlled in widely different ways. Don't assume the timezone is stored in $ENV{TZ}, and even if it is, don't assume that you can control the timezone through that variable.

Don't assume that the epoch starts at 00:00:00, January 1, 1970, because that is OS- and implementation-specific. It is better to store a date in an unambiguous representation. The ISO-8601 standard defines "YYYY-MM-DD" as the date format. A text representation (like "1987-12-18") can be easily converted into an OS-specific value using a module like Date::Parse. An array of values, such as those returned by localtime, can be converted to an OS-specific representation using Time::Local.

When calculating specific times, such as for tests in time or date modules, it may be appropriate to calculate an offset for the epoch.

require Time::Local;
$offset = Time::Local::timegm(0, 0, 0, 1, 0, 70);

The value for $offset in Unix will be 0, but in Mac OS will be some large number. $offset can then be added to a Unix time value to get what should be the proper value on any system.

Character sets and character encoding

Assume little about character sets. Assume nothing about numerical values (ord, chr) of characters. Do not assume that the alphabetic characters are encoded contiguously (in the numeric sense). Do not assume anything about the ordering of the characters. The lowercase letters may come before or after the uppercase letters; the lowercase and uppercase may be interlaced so that both `a' and `A' come before `b'; the accented and other international characters may be interlaced so that ä comes before `b'.

Internationalisation

If you may assume POSIX (a rather large assumption), you may read more about the POSIX locale system from perllocale. The locale system at least attempts to make things a little bit more portable, or at least more convenient and native-friendly for non-English users. The system affects character sets and encoding, and date and time formatting--amongst other things.

System Resources

If your code is destined for systems with severely constrained (or missing!) virtual memory systems then you want to be especially mindful of avoiding wasteful constructs such as:

# NOTE: this is no longer "bad" in perl5.005
for (0..10000000) {}                       # bad
for (my $x = 0; $x <= 10000000; ++$x) {}   # good

@lines = <VERY_LARGE_FILE>;                # bad

while (<FILE>) {$file .= $_}               # sometimes bad
$file = join('', <FILE>);                  # better

The last two constructs may appear unintuitive to most people. The first repeatedly grows a string, whereas the second allocates a large chunk of memory in one go. On some systems, the second is more efficient that the first.

Security

Most multi-user platforms provide basic levels of security, usually implemented at the filesystem level. Some, however, do not--unfortunately. Thus the notion of user id, or "home" directory, or even the state of being logged-in, may be unrecognizable on many platforms. If you write programs that are security-conscious, it is usually best to know what type of system you will be running under so that you can write code explicitly for that platform (or class of platforms).

Style

For those times when it is necessary to have platform-specific code, consider keeping the platform-specific code in one place, making porting to other platforms easier. Use the Config module and the special variable $^O to differentiate platforms, as described in "PLATFORMS".

Be careful in the tests you supply with your module or programs. Module code may be fully portable, but its tests might not be. This often happens when tests spawn off other processes or call external programs to aid in the testing, or when (as noted above) the tests assume certain things about the filesystem and paths. Be careful not to depend on a specific output style for errors, such as when checking $! after an system call. Some platforms expect a certain output format, and perl on those platforms may have been adjusted accordingly. Most specifically, don't anchor a regex when testing an error value.

CPAN Testers

Modules uploaded to CPAN are tested by a variety of volunteers on different platforms. These CPAN testers are notified by mail of each new upload, and reply to the list with PASS, FAIL, NA (not applicable to this platform), or UNKNOWN (unknown), along with any relevant notations.

The purpose of the testing is twofold: one, to help developers fix any problems in their code that crop up because of lack of testing on other platforms; two, to provide users with information about whether a given module works on a given platform.

Mailing list: cpan-testers@perl.org
Testing results: http://testers.cpan.org/

PLATFORMS

As of version 5.002, Perl is built with a $^O variable that indicates the operating system it was built on. This was implemented to help speed up code that would otherwise have to use Config and use the value of $Config{osname}. Of course, to get more detailed information about the system, looking into %Config is certainly recommended.

%Config cannot always be trusted, however, because it was built at compile time. If perl was built in one place, then transferred elsewhere, some values may be wrong. The values may even have been edited after the fact.

Unix

Perl works on a bewildering variety of Unix and Unix-like platforms (see e.g. most of the files in the hints/ directory in the source code kit). On most of these systems, the value of $^O (hence $Config{'osname'}, too) is determined either by lowercasing and stripping punctuation from the first field of the string returned by typing uname -a (or a similar command) at the shell prompt or by testing the file system for the presence of uniquely named files such as a kernel or header file. Here, for example, are a few of the more popular Unix flavors:

uname         $^O        $Config{'archname'}
--------------------------------------------
AIX           aix        aix
BSD/OS        bsdos      i386-bsdos
dgux          dgux       AViiON-dgux
DYNIX/ptx     dynixptx   i386-dynixptx
FreeBSD       freebsd    freebsd-i386    
Linux         linux      arm-linux
Linux         linux      i386-linux
Linux         linux      i586-linux
Linux         linux      ppc-linux
HP-UX         hpux       PA-RISC1.1
IRIX          irix       irix
Mac OS X      rhapsody   rhapsody
MachTen PPC   machten    powerpc-machten
NeXT 3        next       next-fat
NeXT 4        next       OPENSTEP-Mach
openbsd       openbsd    i386-openbsd
OSF1          dec_osf    alpha-dec_osf
reliantunix-n svr4       RM400-svr4
SCO_SV        sco_sv     i386-sco_sv
SINIX-N       svr4       RM400-svr4
sn4609        unicos     CRAY_C90-unicos
sn6521        unicosmk   t3e-unicosmk
sn9617        unicos     CRAY_J90-unicos
SunOS         solaris    sun4-solaris
SunOS         solaris    i86pc-solaris
SunOS4        sunos      sun4-sunos

Because the value of $Config{archname} may depend on the hardware architecture, it can vary more than the value of $^O.

DOS and Derivatives

Perl has long been ported to Intel-style microcomputers running under systems like PC-DOS, MS-DOS, OS/2, and most Windows platforms you can bring yourself to mention (except for Windows CE, if you count that). Users familiar with COMMAND.COM or CMD.EXE style shells should be aware that each of these file specifications may have subtle differences:

$filespec0 = "c:/foo/bar/file.txt";
$filespec1 = "c:\\foo\\bar\\file.txt";
$filespec2 = 'c:\foo\bar\file.txt';
$filespec3 = 'c:\\foo\\bar\\file.txt';

System calls accept either / or \ as the path separator. However, many command-line utilities of DOS vintage treat / as the option prefix, so may get confused by filenames containing /. Aside from calling any external programs, / will work just fine, and probably better, as it is more consistent with popular usage, and avoids the problem of remembering what to backwhack and what not to.

The DOS FAT filesystem can accommodate only "8.3" style filenames. Under the "case-insensitive, but case-preserving" HPFS (OS/2) and NTFS (NT) filesystems you may have to be careful about case returned with functions like readdir or used with functions like open or opendir.

DOS also treats several filenames as special, such as AUX, PRN, NUL, CON, COM1, LPT1, LPT2, etc. Unfortunately, sometimes these filenames won't even work if you include an explicit directory prefix. It is best to avoid such filenames, if you want your code to be portable to DOS and its derivatives. It's hard to know what these all are, unfortunately.

Users of these operating systems may also wish to make use of scripts such as pl2bat.bat or pl2cmd to put wrappers around your scripts.

Newline (\n) is translated as \015\012 by STDIO when reading from and writing to files (see "Newlines"). binmode(FILEHANDLE) will keep \n translated as \012 for that filehandle. Since it is a no-op on other systems, binmode should be used for cross-platform code that deals with binary data. That's assuming you realize in advance that your data is in binary. General-purpose programs should often assume nothing about their data.

The $^O variable and the $Config{archname} values for various DOSish perls are as follows:

OS            $^O        $Config{'archname'}
--------------------------------------------
MS-DOS        dos
PC-DOS        dos
OS/2          os2
Windows 95    MSWin32    MSWin32-x86
Windows 98    MSWin32    MSWin32-x86
Windows NT    MSWin32    MSWin32-x86
Windows NT    MSWin32    MSWin32-ALPHA
Windows NT    MSWin32    MSWin32-ppc
Cygwin        cygwin

Also see:

  • The djgpp environment for DOS, http://www.delorie.com/djgpp/ and perldos.

  • The EMX environment for DOS, OS/2, etc. emx@iaehv.nl, http://www.leo.org/pub/comp/os/os2/leo/gnu/emx+gcc/index.html or ftp://hobbes.nmsu.edu/pub/os2/dev/emx. Also perlos2.

  • Build instructions for Win32 in perlwin32, or under the Cygnus environment in perlcygwin.

  • The Win32::* modules in Win32.

  • The ActiveState Pages, http://www.activestate.com/

  • The Cygwin environment for Win32; README.cygwin (installed as perlcygwin), http://www.cygwin.com/

  • The U/WIN environment for Win32, <http://www.research.att.com/sw/tools/uwin/

  • Build instructions for OS/2, perlos2

Mac OS

Any module requiring XS compilation is right out for most people, because MacPerl is built using non-free (and non-cheap!) compilers. Some XS modules that can work with MacPerl are built and distributed in binary form on CPAN.

Directories are specified as:

volume:folder:file              for absolute pathnames
volume:folder:                  for absolute pathnames
:folder:file                    for relative pathnames
:folder:                        for relative pathnames
:file                           for relative pathnames
file                            for relative pathnames

Files are stored in the directory in alphabetical order. Filenames are limited to 31 characters, and may include any character except for null and :, which is reserved as the path separator.

Instead of flock, see FSpSetFLock and FSpRstFLock in the Mac::Files module, or chmod(0444, ...) and chmod(0666, ...).

In the MacPerl application, you can't run a program from the command line; programs that expect @ARGV to be populated can be edited with something like the following, which brings up a dialog box asking for the command line arguments.

if (!@ARGV) {
    @ARGV = split /\s+/, MacPerl::Ask('Arguments?');
}

A MacPerl script saved as a "droplet" will populate @ARGV with the full pathnames of the files dropped onto the script.

Mac users can run programs under a type of command line interface under MPW (Macintosh Programmer's Workshop, a free development environment from Apple). MacPerl was first introduced as an MPW tool, and MPW can be used like a shell:

perl myscript.plx some arguments

ToolServer is another app from Apple that provides access to MPW tools from MPW and the MacPerl app, which allows MacPerl programs to use system, backticks, and piped open.

"Mac OS" is the proper name for the operating system, but the value in $^O is "MacOS". To determine architecture, version, or whether the application or MPW tool version is running, check:

$is_app    = $MacPerl::Version =~ /App/;
$is_tool   = $MacPerl::Version =~ /MPW/;
($version) = $MacPerl::Version =~ /^(\S+)/;
$is_ppc    = $MacPerl::Architecture eq 'MacPPC';
$is_68k    = $MacPerl::Architecture eq 'Mac68K';

Mac OS X and Mac OS X Server, based on NeXT's OpenStep OS, will (in theory) be able to run MacPerl natively, under the "Classic" environment. The new "Cocoa" environment (formerly called the "Yellow Box") may run a slightly modified version of MacPerl, using the Carbon interfaces.

Mac OS X Server and its Open Source version, Darwin, both run Unix perl natively (with a few patches). Full support for these is slated for perl 5.6.

Also see:

  • The MacPerl Pages, http://www.macperl.com/ .

  • The MacPerl mailing lists, http://www.macperl.org/ .

  • MacPerl Module Porters, http://pudge.net/mmp/ .

VMS

Perl on VMS is discussed in perlvms in the perl distribution. Perl on VMS can accept either VMS- or Unix-style file specifications as in either of the following:

$ perl -ne "print if /perl_setup/i" SYS$LOGIN:LOGIN.COM
$ perl -ne "print if /perl_setup/i" /sys$login/login.com

but not a mixture of both as in:

$ perl -ne "print if /perl_setup/i" sys$login:/login.com
Can't open sys$login:/login.com: file specification syntax error

Interacting with Perl from the Digital Command Language (DCL) shell often requires a different set of quotation marks than Unix shells do. For example:

$ perl -e "print ""Hello, world.\n"""
Hello, world.

There are several ways to wrap your perl scripts in DCL .COM files, if you are so inclined. For example:

$ write sys$output "Hello from DCL!"
$ if p1 .eqs. ""
$ then perl -x 'f$environment("PROCEDURE")
$ else perl -x - 'p1 'p2 'p3 'p4 'p5 'p6 'p7 'p8
$ deck/dollars="__END__"
#!/usr/bin/perl

print "Hello from Perl!\n";

__END__
$ endif

Do take care with $ ASSIGN/nolog/user SYS$COMMAND: SYS$INPUT if your perl-in-DCL script expects to do things like $read = <STDIN>;.

Filenames are in the format "name.extension;version". The maximum length for filenames is 39 characters, and the maximum length for extensions is also 39 characters. Version is a number from 1 to 32767. Valid characters are /[A-Z0-9$_-]/.

VMS's RMS filesystem is case-insensitive and does not preserve case. readdir returns lowercased filenames, but specifying a file for opening remains case-insensitive. Files without extensions have a trailing period on them, so doing a readdir with a file named A.;5 will return a. (though that file could be opened with open(FH, 'A')).

RMS had an eight level limit on directory depths from any rooted logical (allowing 16 levels overall) prior to VMS 7.2. Hence PERL_ROOT:[LIB.2.3.4.5.6.7.8] is a valid directory specification but PERL_ROOT:[LIB.2.3.4.5.6.7.8.9] is not. Makefile.PL authors might have to take this into account, but at least they can refer to the former as /PERL_ROOT/lib/2/3/4/5/6/7/8/.

The VMS::Filespec module, which gets installed as part of the build process on VMS, is a pure Perl module that can easily be installed on non-VMS platforms and can be helpful for conversions to and from RMS native formats.

What \n represents depends on the type of file opened. It could be \015, \012, \015\012, or nothing. The VMS::Stdio module provides access to the special fopen() requirements of files with unusual attributes on VMS.

TCP/IP stacks are optional on VMS, so socket routines might not be implemented. UDP sockets may not be supported.

The value of $^O on OpenVMS is "VMS". To determine the architecture that you are running on without resorting to loading all of %Config you can examine the content of the @INC array like so:

if (grep(/VMS_AXP/, @INC)) {
    print "I'm on Alpha!\n";

} elsif (grep(/VMS_VAX/, @INC)) {
    print "I'm on VAX!\n";

} else {
    print "I'm not so sure about where $^O is...\n";
}

On VMS, perl determines the UTC offset from the SYS$TIMEZONE_DIFFERENTIAL logical name. Although the VMS epoch began at 17-NOV-1858 00:00:00.00, calls to localtime are adjusted to count offsets from 01-JAN-1970 00:00:00.00, just like Unix.

Also see:

  • README.vms (installed as README_vms), perlvms

  • vmsperl list, majordomo@perl.org

    (Put the words subscribe vmsperl in message body.)

  • vmsperl on the web, http://www.sidhe.org/vmsperl/index.html

VOS

Perl on VOS is discussed in README.vos in the perl distribution (installed as perlvos). Perl on VOS can accept either VOS- or Unix-style file specifications as in either of the following:

$ perl -ne "print if /perl_setup/i" >system>notices
$ perl -ne "print if /perl_setup/i" /system/notices

or even a mixture of both as in:

$ perl -ne "print if /perl_setup/i" >system/notices

Even though VOS allows the slash character to appear in object names, because the VOS port of Perl interprets it as a pathname delimiting character, VOS files, directories, or links whose names contain a slash character cannot be processed. Such files must be renamed before they can be processed by Perl. Note that VOS limits file names to 32 or fewer characters.

See README.vos for restrictions that apply when Perl is built with the alpha version of VOS POSIX.1 support.

Perl on VOS is built without any extensions and does not support dynamic loading.

The value of $^O on VOS is "VOS". To determine the architecture that you are running on without resorting to loading all of %Config you can examine the content of the @INC array like so:

if ($^O =~ /VOS/) {
    print "I'm on a Stratus box!\n";
} else {
    print "I'm not on a Stratus box!\n";
    die;
}

if (grep(/860/, @INC)) {
    print "This box is a Stratus XA/R!\n";

} elsif (grep(/7100/, @INC)) {
    print "This box is a Stratus HP 7100 or 8xxx!\n";

} elsif (grep(/8000/, @INC)) {
    print "This box is a Stratus HP 8xxx!\n";

} else {
    print "This box is a Stratus 68K!\n";
}

Also see:

  • README.vos

  • The VOS mailing list.

    There is no specific mailing list for Perl on VOS. You can post comments to the comp.sys.stratus newsgroup, or subscribe to the general Stratus mailing list. Send a letter with "Subscribe Info-Stratus" in the message body to majordomo@list.stratagy.com.

  • VOS Perl on the web at http://ftp.stratus.com/pub/vos/vos.html

EBCDIC Platforms

Recent versions of Perl have been ported to platforms such as OS/400 on AS/400 minicomputers as well as OS/390, VM/ESA, and BS2000 for S/390 Mainframes. Such computers use EBCDIC character sets internally (usually Character Code Set ID 0037 for OS/400 and either 1047 or POSIX-BC for S/390 systems). On the mainframe perl currently works under the "Unix system services for OS/390" (formerly known as OpenEdition), VM/ESA OpenEdition, or the BS200 POSIX-BC system (BS2000 is supported in perl 5.6 and greater). See perlos390 for details.

As of R2.5 of USS for OS/390 and Version 2.3 of VM/ESA these Unix sub-systems do not support the #! shebang trick for script invocation. Hence, on OS/390 and VM/ESA perl scripts can be executed with a header similar to the following simple script:

: # use perl
    eval 'exec /usr/local/bin/perl -S $0 ${1+"$@"}'
        if 0;
#!/usr/local/bin/perl     # just a comment really

print "Hello from perl!\n";

OS/390 will support the #! shebang trick in release 2.8 and beyond. Calls to system and backticks can use POSIX shell syntax on all S/390 systems.

On the AS/400, if PERL5 is in your library list, you may need to wrap your perl scripts in a CL procedure to invoke them like so:

BEGIN
  CALL PGM(PERL5/PERL) PARM('/QOpenSys/hello.pl')
ENDPGM

This will invoke the perl script hello.pl in the root of the QOpenSys file system. On the AS/400 calls to system or backticks must use CL syntax.

On these platforms, bear in mind that the EBCDIC character set may have an effect on what happens with some perl functions (such as chr, pack, print, printf, ord, sort, sprintf, unpack), as well as bit-fiddling with ASCII constants using operators like ^, & and |, not to mention dealing with socket interfaces to ASCII computers (see "Newlines").

Fortunately, most web servers for the mainframe will correctly translate the \n in the following statement to its ASCII equivalent (\r is the same under both Unix and OS/390 & VM/ESA):

print "Content-type: text/html\r\n\r\n";

The values of $^O on some of these platforms includes:

uname         $^O        $Config{'archname'}
--------------------------------------------
OS/390        os390      os390
OS400         os400      os400
POSIX-BC      posix-bc   BS2000-posix-bc
VM/ESA        vmesa      vmesa

Some simple tricks for determining if you are running on an EBCDIC platform could include any of the following (perhaps all):

if ("\t" eq "\05")   { print "EBCDIC may be spoken here!\n"; }

if (ord('A') == 193) { print "EBCDIC may be spoken here!\n"; }

if (chr(169) eq 'z') { print "EBCDIC may be spoken here!\n"; }

One thing you may not want to rely on is the EBCDIC encoding of punctuation characters since these may differ from code page to code page (and once your module or script is rumoured to work with EBCDIC, folks will want it to work with all EBCDIC character sets).

Also see:

  • *

    perlos390, README.os390, perlposix-bc, README.vmesa, perlebcdic.

  • The perl-mvs@perl.org list is for discussion of porting issues as well as general usage issues for all EBCDIC Perls. Send a message body of "subscribe perl-mvs" to majordomo@perl.org.

  • AS/400 Perl information at http://as400.rochester.ibm.com/ as well as on CPAN in the ports/ directory.

Acorn RISC OS

Because Acorns use ASCII with newlines (\n) in text files as \012 like Unix, and because Unix filename emulation is turned on by default, most simple scripts will probably work "out of the box". The native filesystem is modular, and individual filesystems are free to be case-sensitive or insensitive, and are usually case-preserving. Some native filesystems have name length limits, which file and directory names are silently truncated to fit. Scripts should be aware that the standard filesystem currently has a name length limit of 10 characters, with up to 77 items in a directory, but other filesystems may not impose such limitations.

Native filenames are of the form

Filesystem#Special_Field::DiskName.$.Directory.Directory.File

where

Special_Field is not usually present, but may contain . and $ .
Filesystem =~ m|[A-Za-z0-9_]|
DsicName   =~ m|[A-Za-z0-9_/]|
$ represents the root directory
. is the path separator
@ is the current directory (per filesystem but machine global)
^ is the parent directory
Directory and File =~ m|[^\0- "\.\$\%\&:\@\\^\|\177]+|

The default filename translation is roughly tr|/.|./|;

Note that "ADFS::HardDisk.$.File" ne 'ADFS::HardDisk.$.File' and that the second stage of $ interpolation in regular expressions will fall foul of the $. if scripts are not careful.

Logical paths specified by system variables containing comma-separated search lists are also allowed; hence System:Modules is a valid filename, and the filesystem will prefix Modules with each section of System$Path until a name is made that points to an object on disk. Writing to a new file System:Modules would be allowed only if System$Path contains a single item list. The filesystem will also expand system variables in filenames if enclosed in angle brackets, so <System$Dir>.Modules would look for the file $ENV{'System$Dir'} . 'Modules'. The obvious implication of this is that fully qualified filenames can start with <> and should be protected when open is used for input.

Because . was in use as a directory separator and filenames could not be assumed to be unique after 10 characters, Acorn implemented the C compiler to strip the trailing .c .h .s and .o suffix from filenames specified in source code and store the respective files in subdirectories named after the suffix. Hence files are translated:

foo.h           h.foo
C:foo.h         C:h.foo        (logical path variable)
sys/os.h        sys.h.os       (C compiler groks Unix-speak)
10charname.c    c.10charname
10charname.o    o.10charname
11charname_.c   c.11charname   (assuming filesystem truncates at 10)

The Unix emulation library's translation of filenames to native assumes that this sort of translation is required, and it allows a user-defined list of known suffixes that it will transpose in this fashion. This may seem transparent, but consider that with these rules foo/bar/baz.h and foo/bar/h/baz both map to foo.bar.h.baz, and that readdir and glob cannot and do not attempt to emulate the reverse mapping. Other .'s in filenames are translated to /.

As implied above, the environment accessed through %ENV is global, and the convention is that program specific environment variables are of the form Program$Name. Each filesystem maintains a current directory, and the current filesystem's current directory is the global current directory. Consequently, sociable programs don't change the current directory but rely on full pathnames, and programs (and Makefiles) cannot assume that they can spawn a child process which can change the current directory without affecting its parent (and everyone else for that matter).

Because native operating system filehandles are global and are currently allocated down from 255, with 0 being a reserved value, the Unix emulation library emulates Unix filehandles. Consequently, you can't rely on passing STDIN, STDOUT, or STDERR to your children.

The desire of users to express filenames of the form <Foo$Dir>.Bar on the command line unquoted causes problems, too: `` command output capture has to perform a guessing game. It assumes that a string <[^<>]+\$[^<>]> is a reference to an environment variable, whereas anything else involving < or > is redirection, and generally manages to be 99% right. Of course, the problem remains that scripts cannot rely on any Unix tools being available, or that any tools found have Unix-like command line arguments.

Extensions and XS are, in theory, buildable by anyone using free tools. In practice, many don't, as users of the Acorn platform are used to binary distributions. MakeMaker does run, but no available make currently copes with MakeMaker's makefiles; even if and when this should be fixed, the lack of a Unix-like shell will cause problems with makefile rules, especially lines of the form cd sdbm && make all, and anything using quoting.

"RISC OS" is the proper name for the operating system, but the value in $^O is "riscos" (because we don't like shouting).

Other perls

Perl has been ported to many platforms that do not fit into any of the categories listed above. Some, such as AmigaOS, Atari MiNT, BeOS, HP MPE/iX, QNX, Plan 9, and VOS, have been well-integrated into the standard Perl source code kit. You may need to see the ports/ directory on CPAN for information, and possibly binaries, for the likes of: aos, Atari ST, lynxos, riscos, Novell Netware, Tandem Guardian, etc. (Yes, we know that some of these OSes may fall under the Unix category, but we are not a standards body.)

Some approximate operating system names and their $^O values in the "OTHER" category include:

OS            $^O        $Config{'archname'}
------------------------------------------
Amiga DOS     amigaos    m68k-amigos
MPE/iX        mpeix      PA-RISC1.1

See also:

  • Amiga, README.amiga (installed as perlamiga).

  • Atari, README.mint and Guido Flohr's web page http://stud.uni-sb.de/~gufl0000/

  • Be OS, README.beos

  • HP 300 MPE/iX, README.mpeix and Mark Bixby's web page http://www.cccd.edu/~markb/perlix.html

  • A free perl5-based PERL.NLM for Novell Netware is available in precompiled binary and source code form from http://www.novell.com/ as well as from CPAN.

  • Plan 9, README.plan9

FUNCTION IMPLEMENTATIONS

Listed below are functions that are either completely unimplemented or else have been implemented differently on various platforms. Following each description will be, in parentheses, a list of platforms that the description applies to.

The list may well be incomplete, or even wrong in some places. When in doubt, consult the platform-specific README files in the Perl source distribution, and any other documentation resources accompanying a given port.

Be aware, moreover, that even among Unix-ish systems there are variations.

For many functions, you can also query %Config, exported by default from the Config module. For example, to check whether the platform has the lstat call, check $Config{d_lstat}. See Config for a full description of available variables.

Alphabetical Listing of Perl Functions

-X FILEHANDLE
-X EXPR
-X

-r, -w, and -x have a limited meaning only; directories and applications are executable, and there are no uid/gid considerations. -o is not supported. (Mac OS)

-r, -w, -x, and -o tell whether the file is accessible, which may not reflect UIC-based file protections. (VMS)

-s returns the size of the data fork, not the total size of data fork plus resource fork. (Mac OS).

-s by name on an open file will return the space reserved on disk, rather than the current extent. -s on an open filehandle returns the current size. (RISC OS)

-R, -W, -X, -O are indistinguishable from -r, -w, -x, -o. (Mac OS, Win32, VMS, RISC OS)

-b, -c, -k, -g, -p, -u, -A are not implemented. (Mac OS)

-g, -k, -l, -p, -u, -A are not particularly meaningful. (Win32, VMS, RISC OS)

-d is true if passed a device spec without an explicit directory. (VMS)

-T and -B are implemented, but might misclassify Mac text files with foreign characters; this is the case will all platforms, but may affect Mac OS often. (Mac OS)

-x (or -X) determine if a file ends in one of the executable suffixes. -S is meaningless. (Win32)

-x (or -X) determine if a file has an executable file type. (RISC OS)

alarm SECONDS
alarm

Not implemented. (Win32)

binmode FILEHANDLE

Meaningless. (Mac OS, RISC OS)

Reopens file and restores pointer; if function fails, underlying filehandle may be closed, or pointer may be in a different position. (VMS)

The value returned by tell may be affected after the call, and the filehandle may be flushed. (Win32)

chmod LIST

Only limited meaning. Disabling/enabling write permission is mapped to locking/unlocking the file. (Mac OS)

Only good for changing "owner" read-write access, "group", and "other" bits are meaningless. (Win32)

Only good for changing "owner" and "other" read-write access. (RISC OS)

Access permissions are mapped onto VOS access-control list changes. (VOS)

chown LIST

Not implemented. (Mac OS, Win32, Plan9, RISC OS, VOS)

Does nothing, but won't fail. (Win32)

chroot FILENAME
chroot

Not implemented. (Mac OS, Win32, VMS, Plan9, RISC OS, VOS, VM/ESA)

crypt PLAINTEXT,SALT

May not be available if library or source was not provided when building perl. (Win32)

Not implemented. (VOS)

dbmclose HASH

Not implemented. (VMS, Plan9, VOS)

dbmopen HASH,DBNAME,MODE

Not implemented. (VMS, Plan9, VOS)

dump LABEL

Not useful. (Mac OS, RISC OS)

Not implemented. (Win32)

Invokes VMS debugger. (VMS)

exec LIST

Not implemented. (Mac OS)

Implemented via Spawn. (VM/ESA)

Does not automatically flush output handles on some platforms. (SunOS, Solaris, HP-UX)

fcntl FILEHANDLE,FUNCTION,SCALAR

Not implemented. (Win32, VMS)

flock FILEHANDLE,OPERATION

Not implemented (Mac OS, VMS, RISC OS, VOS).

Available only on Windows NT (not on Windows 95). (Win32)

fork

Not implemented. (Mac OS, AmigaOS, RISC OS, VOS, VM/ESA)

Emulated using multiple interpreters. See perlfork. (Win32)

Does not automatically flush output handles on some platforms. (SunOS, Solaris, HP-UX)

getlogin

Not implemented. (Mac OS, RISC OS)

getpgrp PID

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS)

getppid

Not implemented. (Mac OS, Win32, VMS, RISC OS)

getpriority WHICH,WHO

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS, VM/ESA)

getpwnam NAME

Not implemented. (Mac OS, Win32)

Not useful. (RISC OS)

getgrnam NAME

Not implemented. (Mac OS, Win32, VMS, RISC OS)

getnetbyname NAME

Not implemented. (Mac OS, Win32, Plan9)

getpwuid UID

Not implemented. (Mac OS, Win32)

Not useful. (RISC OS)

getgrgid GID

Not implemented. (Mac OS, Win32, VMS, RISC OS)

getnetbyaddr ADDR,ADDRTYPE

Not implemented. (Mac OS, Win32, Plan9)

getprotobynumber NUMBER

Not implemented. (Mac OS)

getservbyport PORT,PROTO

Not implemented. (Mac OS)

getpwent

Not implemented. (Mac OS, Win32, VM/ESA)

getgrent

Not implemented. (Mac OS, Win32, VMS, VM/ESA)

gethostent

Not implemented. (Mac OS, Win32)

getnetent

Not implemented. (Mac OS, Win32, Plan9)

getprotoent

Not implemented. (Mac OS, Win32, Plan9)

getservent

Not implemented. (Win32, Plan9)

setpwent

Not implemented. (Mac OS, Win32, RISC OS)

setgrent

Not implemented. (Mac OS, Win32, VMS, RISC OS)

sethostent STAYOPEN

Not implemented. (Mac OS, Win32, Plan9, RISC OS)

setnetent STAYOPEN

Not implemented. (Mac OS, Win32, Plan9, RISC OS)

setprotoent STAYOPEN

Not implemented. (Mac OS, Win32, Plan9, RISC OS)

setservent STAYOPEN

Not implemented. (Plan9, Win32, RISC OS)

endpwent

Not implemented. (Mac OS, MPE/iX, VM/ESA, Win32)

endgrent

Not implemented. (Mac OS, MPE/iX, RISC OS, VM/ESA, VMS, Win32)

endhostent

Not implemented. (Mac OS, Win32)

endnetent

Not implemented. (Mac OS, Win32, Plan9)

endprotoent

Not implemented. (Mac OS, Win32, Plan9)

endservent

Not implemented. (Plan9, Win32)

getsockopt SOCKET,LEVEL,OPTNAME

Not implemented. (Mac OS, Plan9)

glob EXPR
glob

Globbing built-in, but only * and ? metacharacters are supported. (Mac OS)

This operator is implemented via the File::Glob extension on most platforms. See File::Glob for portability information.

ioctl FILEHANDLE,FUNCTION,SCALAR

Not implemented. (VMS)

Available only for socket handles, and it does what the ioctlsocket() call in the Winsock API does. (Win32)

Available only for socket handles. (RISC OS)

kill SIGNAL, LIST

Not implemented, hence not useful for taint checking. (Mac OS, RISC OS)

kill() doesn't have the semantics of raise(), i.e. it doesn't send a signal to the identified process like it does on Unix platforms. Instead kill($sig, $pid) terminates the process identified by $pid, and makes it exit immediately with exit status $sig. As in Unix, if $sig is 0 and the specified process exists, it returns true without actually terminating it. (Win32)

Not implemented. (Mac OS, MPE/iX, VMS, RISC OS)

Link count not updated because hard links are not quite that hard (They are sort of half-way between hard and soft links). (AmigaOS)

Hard links are implemented on Win32 (Windows NT and Windows 2000) under NTFS only.

lstat FILEHANDLE
lstat EXPR
lstat

Not implemented. (VMS, RISC OS)

Return values (especially for device and inode) may be bogus. (Win32)

msgctl ID,CMD,ARG
msgget KEY,FLAGS
msgsnd ID,MSG,FLAGS
msgrcv ID,VAR,SIZE,TYPE,FLAGS

Not implemented. (Mac OS, Win32, VMS, Plan9, RISC OS, VOS)

open FILEHANDLE,EXPR
open FILEHANDLE

The | variants are supported only if ToolServer is installed. (Mac OS)

open to |- and -| are unsupported. (Mac OS, Win32, RISC OS)

Opening a process does not automatically flush output handles on some platforms. (SunOS, Solaris, HP-UX)

pipe READHANDLE,WRITEHANDLE

Not implemented. (Mac OS)

Very limited functionality. (MiNT)

Not implemented. (Win32, VMS, RISC OS)

select RBITS,WBITS,EBITS,TIMEOUT

Only implemented on sockets. (Win32)

Only reliable on sockets. (RISC OS)

Note that the socket FILEHANDLE form is generally portable.

semctl ID,SEMNUM,CMD,ARG
semget KEY,NSEMS,FLAGS
semop KEY,OPSTRING

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS)

setgrent

Not implemented. (MPE/iX, Win32)

setpgrp PID,PGRP

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS)

setpriority WHICH,WHO,PRIORITY

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS)

setpwent

Not implemented. (MPE/iX, Win32)

setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL

Not implemented. (Mac OS, Plan9)

shmctl ID,CMD,ARG
shmget KEY,SIZE,FLAGS
shmread ID,VAR,POS,SIZE
shmwrite ID,STRING,POS,SIZE

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS)

socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS, VM/ESA)

stat FILEHANDLE
stat EXPR
stat

Platforms that do not have rdev, blksize, or blocks will return these as '', so numeric comparison or manipulation of these fields may cause 'not numeric' warnings.

mtime and atime are the same thing, and ctime is creation time instead of inode change time. (Mac OS)

device and inode are not meaningful. (Win32)

device and inode are not necessarily reliable. (VMS)

mtime, atime and ctime all return the last modification time. Device and inode are not necessarily reliable. (RISC OS)

dev, rdev, blksize, and blocks are not available. inode is not meaningful and will differ between stat calls on the same file. (os2)

Not implemented. (Win32, VMS, RISC OS)

syscall LIST

Not implemented. (Mac OS, Win32, VMS, RISC OS, VOS, VM/ESA)

sysopen FILEHANDLE,FILENAME,MODE,PERMS

The traditional "0", "1", and "2" MODEs are implemented with different numeric values on some systems. The flags exported by Fcntl (O_RDONLY, O_WRONLY, O_RDWR) should work everywhere though. (Mac OS, OS/390, VM/ESA)

system LIST

Only implemented if ToolServer is installed. (Mac OS)

As an optimization, may not call the command shell specified in $ENV{PERL5SHELL}. system(1, @args) spawns an external process and immediately returns its process designator, without waiting for it to terminate. Return value may be used subsequently in wait or waitpid. Failure to spawn() a subprocess is indicated by setting $? to "255 << 8". $? is set in a way compatible with Unix (i.e. the exitstatus of the subprocess is obtained by "$? >> 8", as described in the documentation). (Win32)

There is no shell to process metacharacters, and the native standard is to pass a command line terminated by "\n" "\r" or "\0" to the spawned program. Redirection such as > foo is performed (if at all) by the run time library of the spawned program. system list will call the Unix emulation library's exec emulation, which attempts to provide emulation of the stdin, stdout, stderr in force in the parent, providing the child program uses a compatible version of the emulation library. scalar will call the native command line direct and no such emulation of a child Unix program will exists. Mileage will vary. (RISC OS)

Far from being POSIX compliant. Because there may be no underlying /bin/sh tries to work around the problem by forking and execing the first token in its argument string. Handles basic redirection ("<" or ">") on its own behalf. (MiNT)

Does not automatically flush output handles on some platforms. (SunOS, Solaris, HP-UX)

times

Only the first entry returned is nonzero. (Mac OS)

"cumulative" times will be bogus. On anything other than Windows NT or Windows 2000, "system" time will be bogus, and "user" time is actually the time returned by the clock() function in the C runtime library. (Win32)

Not useful. (RISC OS)

truncate FILEHANDLE,LENGTH
truncate EXPR,LENGTH

Not implemented. (VMS)

Truncation to zero-length only. (VOS)

If a FILEHANDLE is supplied, it must be writable and opened in append mode (i.e., use open(FH, '>filename')> or sysopen(FH,...,O_APPEND|O_RDWR). If a filename is supplied, it should not be held open elsewhere. (Win32)

umask EXPR
umask

Returns undef where unavailable, as of version 5.005.

umask works but the correct permissions are set only when the file is finally closed. (AmigaOS)

utime LIST

Only the modification time is updated. (Mac OS, VMS, RISC OS)

May not behave as expected. Behavior depends on the C runtime library's implementation of utime(), and the filesystem being used. The FAT filesystem typically does not support an "access time" field, and it may limit timestamps to a granularity of two seconds. (Win32)

wait
waitpid PID,FLAGS

Not implemented. (Mac OS, VOS)

Can only be applied to process handles returned for processes spawned using system(1, ...) or pseudo processes created with fork(). (Win32)

Not useful. (RISC OS)

CHANGES

v1.47, 22 March 2000

Various cleanups from Tom Christiansen, including migration of long platform listings from perl.

v1.46, 12 February 2000

Updates for VOS and MPE/iX. (Peter Prymmer) Other small changes.

v1.45, 20 December 1999

Small changes from 5.005_63 distribution, more changes to EBCDIC info.

v1.44, 19 July 1999

A bunch of updates from Peter Prymmer for $^O values, endianness, File::Spec, VMS, BS2000, OS/400.

v1.43, 24 May 1999

Added a lot of cleaning up from Tom Christiansen.

v1.42, 22 May 1999

Added notes about tests, sprintf/printf, and epoch offsets.

v1.41, 19 May 1999

Lots more little changes to formatting and content.

Added a bunch of $^O and related values for various platforms; fixed mail and web addresses, and added and changed miscellaneous notes. (Peter Prymmer)

v1.40, 11 April 1999

Miscellaneous changes.

v1.39, 11 February 1999

Changes from Jarkko and EMX URL fixes Michael Schwern. Additional note about newlines added.

v1.38, 31 December 1998

More changes from Jarkko.

v1.37, 19 December 1998

More minor changes. Merge two separate version 1.35 documents.

v1.36, 9 September 1998

Updated for Stratus VOS. Also known as version 1.35.

v1.35, 13 August 1998

Integrate more minor changes, plus addition of new sections under "ISSUES": "Numbers endianness and Width", "Character sets and character encoding", "Internationalisation".

v1.33, 06 August 1998

Integrate more minor changes.

v1.32, 05 August 1998

Integrate more minor changes.

v1.30, 03 August 1998

Major update for RISC OS, other minor changes.

v1.23, 10 July 1998

First public release with perl5.005.

Supported Platforms

As of early March 2000 (the Perl release 5.6.0), the following platforms are able to build Perl from the standard source code distribution available at http://www.perl.com/CPAN/src/index.html

	AIX
	DOS DJGPP 	1)
	EPOC
	FreeBSD
	HP-UX
	IRIX
	Linux
	LynxOS
	MachTen
	MPE/iX
	NetBSD
	OpenBSD
	OS/2
	QNX
	Rhapsody/Darwin 2)
	SCO SV
	SINIX
	Solaris
	SVR4
	Tru64 UNIX      3)
	UNICOS
	UNICOS/mk
	Unixware
	VMS
	VOS
	Windows 3.1     1)
	Windows 95      1) 4)
	Windows 98      1) 4)
	Windows NT      1) 4)

        1) in DOS mode either the DOS or OS/2 ports can be used
        2) new in 5.6.0: the BSD/NeXT-based UNIX of Mac OS X
        3) formerly known as Digital UNIX and before that DEC OSF/1
        4) compilers: Borland, Cygwin, Mingw32 EGCS/GCC, VC++

The following platforms worked for the previous major release (5.005_03 being the latest maintenance release of that, as of early March 2000), but be did not manage to test these in time for the 5.6.0 release of Perl. There is a very good chance that these will work just fine with 5.6.0.

A/UX
BeOS
BSD/OS
DG/UX
DYNIX/ptx
DomainOS
Hurd
NextSTEP
OpenSTEP
PowerMAX
SCO ODT/OSR	
SunOS
Ultrix

The following platform worked for the previous major release (5.005_03 being the latest maintenance release of that, as of early March 2000). However, standardization on UTF-8 as the internal string representation in 5.6.0 has introduced incompatibilities in this EBCDIC platform. Support for this platform may be enabled in a future release:

OS390	1)

1) Previously known as MVS, or OpenEdition MVS.

Strongly related to the OS390 platform by also being EBCDIC-based mainframe platforms are the following platforms:

BS2000
VM/ESA

These are also not expected to work under 5.6.0 for the same reasons as OS390. Contact the mailing list perl-mvs@perl.org for more details.

MacOS (Classic, pre-X) is almost 5.6.0-ready; building from the source does work with 5.6.0, but additional MacOS specific source code is needed for a complete port. Contact the mailing list macperl-porters@macperl.org for more information.

The following platforms have been known to build Perl from source in the past, but we haven't been able to verify their status for the current release, either because the hardware/software platforms are rare or because we don't have an active champion on these platforms--or both:

3b1
AmigaOS
ConvexOS
CX/UX
DC/OSx
DDE SMES
DOS EMX
Dynix
EP/IX
ESIX
FPS
GENIX
Greenhills
ISC
MachTen 68k
MiNT
MPC
NEWS-OS
Opus
Plan 9
PowerUX
RISC/os
Stellar
SVR2
TI1500
TitanOS
Unisys Dynix
Unixware

Support for the following platform is planned for a future Perl release:

Netware

The following platforms have their own source code distributions and binaries available via http://www.perl.com/CPAN/ports/index.html:

			Perl release

AS/400			5.003
Netware			5.003_07
Tandem Guardian		5.004

The following platforms have only binaries available via http://www.perl.com/CPAN/ports/index.html :

			Perl release

Acorn RISCOS		5.005_02
AOS			5.002
LynxOS			5.004_02

Although we do suggest that you always build your own Perl from the source code, both for maximal configurability and for security, in case you are in a hurry you can check http://www.perl.com/CPAN/ports/index.html for binary distributions.

SEE ALSO

perlaix, perlamiga, perlcygwin, perldos, perlepoc, perlebcdic, perlhpux, perlos2, perlos390, perlposix-bc, perlwin32, perlvms, perlvos, and Win32.

AUTHORS / CONTRIBUTORS

Abigail <abigail@fnx.com>, Charles Bailey <bailey@newman.upenn.edu>, Graham Barr <gbarr@pobox.com>, Tom Christiansen <tchrist@perl.com>, Nicholas Clark <Nicholas.Clark@liverpool.ac.uk>, Thomas Dorner <Thomas.Dorner@start.de>, Andy Dougherty <doughera@lafcol.lafayette.edu>, Dominic Dunlop <domo@vo.lu>, Neale Ferguson <neale@mailbox.tabnsw.com.au>, David J. Fiander <davidf@mks.com>, Paul Green <Paul_Green@stratus.com>, M.J.T. Guy <mjtg@cus.cam.ac.uk>, Jarkko Hietaniemi <jhi@iki.fi>, Luther Huffman <lutherh@stratcom.com>, Nick Ing-Simmons <nick@ni-s.u-net.com>, Andreas J. König <koenig@kulturbox.de>, Markus Laker <mlaker@contax.co.uk>, Andrew M. Langmead <aml@world.std.com>, Larry Moore <ljmoore@freespace.net>, Paul Moore <Paul.Moore@uk.origin-it.com>, Chris Nandor <pudge@pobox.com>, Matthias Neeracher <neeri@iis.ee.ethz.ch>, Gary Ng <71564.1743@CompuServe.COM>, Tom Phoenix <rootbeer@teleport.com>, André Pirard <A.Pirard@ulg.ac.be>, Peter Prymmer <pvhp@forte.com>, Hugo van der Sanden <hv@crypt0.demon.co.uk>, Gurusamy Sarathy <gsar@activestate.com>, Paul J. Schinder <schinder@pobox.com>, Michael G Schwern <schwern@pobox.com>, Dan Sugalski <sugalskd@ous.edu>, Nathan Torkington <gnat@frii.com>.

This document is maintained by Chris Nandor <pudge@pobox.com>.

VERSION

Version 1.47, last modified 22 March 2000

1 POD Error

The following errors were encountered while parsing the POD:

Around line 696:

Expected '=item *'