NAME

MQUL::Reference - Describes the MQUL query and update language

INTRODUCTION

The MQUL (pronounced "umm, cool") language is heavily based on MongoDB's query and update language. While I don't intend to make it 100% compatible with it, it is very nearly so, with only some minor differences which are mostly additions rather than behavioral changes.

The language deals with two subjects: queries and updates. Queries are used to match documents (in the MongoDB sense of the word; documents are just hash-refs in the Perl world), while updates are used to modify the attributes of a document.

QUERY STRUCTURES

A query is a hash-ref whose keys are attributes, and values are constraints. A document needs to meet the constraints of every attribute in the query hash-ref in order to match.

THE EQUALITY CONSTRAINT

The simplest constraint a query hash-ref can define is an equality constraint, which checks if the value of a certain attribute in a document equals the value defined by the constraint. For example:

$query = { title => 'Freaks and Geeks' }

A document will match this query hash-ref if it has a title attribute, whose value equals 'Freaks and Geeks'.

The equality attribute in MongoDB actually works with arrays too, but the behavior is a bit different: If the document has the constrained attribute, but this attribute is an array, the document will match the constraint if that array has the value in it. For example, the query:

$query = { tv_shows => 'Freaks and Geeks' }

Will match the following document:

$document = { tv_shows => ['Freaks and Geeks', 'Undeclared', 'How I Met Your Mother'] }

MQUL extends the equality constraint even further than MongoDB. In MQUL, the value of the constraint doesn't have to be a scalar, but can actually be a data structure such as an array or hash reference. For example:

$query = {
	numbers => {
		one => 1,
		two => 2,
		three => 3,
	}
}

A document will match this constraint if it has the 'numbers' attribute, with exactly the same hash-ref from the query as its value. In order to compare the document's structure with the constraint structure, MQUL uses Data::Compare.

The equality constraint in MQUL also supports comparing MongoDB::OID objects and MorboDB::OID objects (which are used by MorboDB, my in-memory "clone" of MongoDB).

THE LARGER/SMALLER THAN CONSTRAINTS

Some other simple constrains require that an attribute will be larger or smaller than a certain value. Mostly, the comparison will be mathematical (e.g. 5 > 3 or 3 <= 5). However, the comparison can also be alphanumerical (e.g. 'and' lt 'bob' or 'max' ge 'max').

For example:

$query = { number => { '$gte' => 2, '$lt' => 5 } }

Here, we're asking documents to have the number attribute, with a number that's either larger (or equal) than 2, and lower than 5 (so 2, 3 and 4 are acceptable).

As you can see, this time the constraints are provided to the 'number' attribute in the query structure as a hash-ref with two constraints. The fact that we're giving more than one constraint on the same attribute isn't the reason for using a hash-ref. A hash-ref is used for all of the constraints in the language, except of course the equality constraint described before, so the hash-ref can also have only one constraint, like:

$query = { string => { '$lt' => 'bob' } }

The following larger/smaller than constraints are available:

$gte - Greater than or equals to (in Perl, this translates to the >= operator in the mathematical sense, and to ge in the alphanumerical sense).
$gt - Greater than (in Perl, this translates to the > operator in the mathematical sense, and to gt in the alphanumerical sense).
$lte - Less than or equals to (in Perl, this translates to the <= operator in the mathematical sense, and to le in the alphanumerical sense).
$lt - Less than (in Perl, this translates to the < operator in the mathematical sense, and to lt in the alphanumerical sense).

THE NON-EQUALITY CONSTRAINT (AND THE SECOND EQUALITY CONSTRAINT)

Sometimes you want to make sure a certain attribute's value does not equal some specific value. This is where the $ne constraint is useful. Once again, the comparison can either be mathematical (in which case it translates to the != operator in Perl), or alphanumerical (in which case it translates to the ne operator in Perl).

$query = {
	title => { '$ne' => 'Freaks and Geeks' },
	year => { '$ne' => 1999 },
}

The following document will match this constraint:

$document = {
	title => 'Undeclared',
	year => 2001,
}

The $ne constraint is somewhat different than the equality constraint described earlier. It cannot work with arrays, and will not compare complex data structures.

For completeness, MQUL also provides a second equality constraint, called $eq, which is exactly the opposite of $ne. However, this equality constraint, just like $ne, does not work with arrays and complex data structures, nor with MongoDB::OID and MorboDB::OID objects.

THE EXISTS (OR NOT EXISTS) CONSTRAINTS

Sometimes you just wanna make sure an attribute exists (or doesn't) in a document, whatever the value (even undefined). In such cases, the $exists constraint can be used:

$query = { imdb_score => { '$exists' => 1 } }

The above example will only match documents that have the 'imdb_score' attribute.

$query = { imdb_score => { '$exists' => 0 } }

This, however, will only match documents that don't have the 'imdb_score' attribute.

THE MODULO CONSTRAINT

The $mod constraint can be used for fast modulo queries on a certain attribute. For example:

$query = { number => { '$mod' => [2, 0] } }

This constraint asks that $document->{number} % 2 == 0.

THE IN OR NOT IN CONSTRAINTS

Sometimes you want to make sure the value of a certain attribute will be (or won't be) one of a predefined set of acceptable (or not acceptable) values. For this, the $in and the $nin constraints can be used. For example:

$query = {
	title => { '$in' => ['Freaks and Geeks', 'Undeclared'] },
	genre => { '$nin' => ['Drama', 'Documentary'] },
}

This query will only match documents whose 'title' attribute is either 'Freaks and Geeks' or 'Undeclared', and whose 'genre' attribute is neither 'Drama' nor 'Documentary'.

THE SIZE CONSTRAINT

If your documents have an attribute which holds an array or a hash, you can match those whose arrays/hashes are of a certain size. For example:

$query = { tags => { '$size' => 2 } }

This will match documents that have the 'tags' attribute, with either an array of two values, or a hash with two keys.

THE ALL CONSTRAINT

The $all constraint is used to make sure an array attribute has all values in a set of predefined values (it can have more values though). For example:

$query = { tags => { '$all' => [qw/love hate/] } }

This will only match documents that have the 'tags' attribute with an array that has both 'love' and 'hate' in it. This document will match:

$document = { tags => [qw/love indifference hate/] }

THE TYPE CONSTRAINT

The $type constraint can be used when you need a certain attribute or attributes to have values of a certain specific type. In MongoDB, the types are numbered (like 2 for strings, 4 for arrays, etc.), which is really hard to remember. In MQUL, however, the types are named, plus (mostly due to differences between the Perl world and the MongoDB world) the actual types available are somewhat different.

But before we go into the list of available types, let's see a simple example:

$query = {
	tags => { '$type' => 'array' },
	imdb_score => { '$type' => 'int' },
}

This will only match documents that have a 'tags' attribute with arrays as their values, and an 'imdb_score' attribute with integers (but not floats) as the values. So, the following document will match:

$document_that_matches = {
	title => 'Fake Title',
	tags => [qw/comedy drama/],
	imdb_score => 8,
}

While this document won't:

$document_that_doesnt = {
	title => 'Another Fake Title',
	tags => [qw/mystery thriller/],
	imdb_score => 8.5,
}

Even though 'tags' is an array, 'imdb_score' is not an integer, and thus the second document will not match.

The following types are available:

int: matches integers, including negative integers and zero.
float: matches floating point numbers (like 1.23 or 30, which is also an integer).
real: matches real numbers (like Pi, which is a rational number).
whole: matches whole numbers, which are positive integers and zero (but not negative integers).
string: matches strings (basically, any scalar value in Perl is a string, including numbers).
array: matches array references.
hash: matches hash references.
bool: matches boolean values (everything in Perl is a boolean value, so every attribute will match this, even those with undefined values, or false values such as 0 or the empty string).
date: this will match W3C formatted datetime strings, as described by the DateTime::Format::W3CDTF module.
null: this will match documents that have a certain attribute, but whose value is undefined (i.e. undef).
regex: this will match regular expressions, such as qr/^\d+$/.

OR QUERIES

As you've probably realized by now, a document needs to match every constraint in the query hash-ref. If we were to translate a query hash-ref into an SQL WHERE clause, the constraints will be joined with AND.

A query language is really nothing without the ability for OR queries (or sub-queries). Just like in MongoDB, the $or construct can be used. The usage is simple: you give the query hash-ref a key called $or, with a value which is an array reference. This array reference holds one or more (well, two or more if you actually want it to mean anything) hash-refs of constraints. For example:

$query = {
	imdb_score => { '$gt' => 7 },
	'$or' => [
		{ title => 'Freaks and Geeks' },
		{ title => 'Undeclared' },
	],
}

If we were to translate this to an SQL WHERE clause, this is what we'd get:

WHERE imdb_score > 7 AND (title = 'Freaks and Geeks' OR title = 'Undeclared')

So, in order to match this query, a document needs to have the 'imdb_score' attribute with a value larger than 7, and a 'title' attribute with either 'Freaks and Geeks' or 'Undeclared' as its value.

You might notice we've already done pretty much the same thing with the $in constraint. But the $in constraint is very simple, while $or can be used for more complex constraints, such as this:

$query = {
	'$or' => [
		{ imdb_score => { '$gte' => 4, '$lte' => 7 } },
		{ year => { '$gte' => 2000, '$lt' => DateTime->now->year } },
		{ comments => { '$type' => 'array', '$size' => 100 } },
	],
}

AND QUERIES

Sometimes you need to run more complex queries that are difficult or even impossible to run with a basic query hash-ref. Or you might just want to be more verbose when creating your queries. Much like the $or keyword, the $and keyword can be used with an array-ref of queries that must all match:

$query = {
	'$and' => [
		{ title => 'Freaks and Geeks' },
		{ imdb_score => { '$gt' => 7 }
	]
}

A good usage for the $and keyword is to match several $or queries:

$query = {
	'$and' => [
		{ '$or' => [ ... ] },
		{ '$or' => [ ... ] }
	]
}

THE DOT NOTATION

Since version 1.0.0, MQUL supports the dot notation for querying against sub-fields and even array items. For example, if we look at the following document:

$document = {
	some => { thing => { very => { deep => 3 } } },
	array => { of => { hashes => [  { one => 1 }, { two => 2 } ] } }
}

All of these queries will return true:

$query = { 'some.thing.very.deep' => 3 }

$query = { 'some.thing.very.deep' => { '$gt' => 2, '$lt' => 4 } }

$query = { 'array.of.hashes' => { '$type' => 'array' } }

$query = { 'array.of.hashes.0' => { '$type' => 'hash' } }

$query = { 'array.of.hashes.1.two' => { '$exists' => 1 } }

$query = { 'some.thing.that.doesnt.exist' => { '$exists' => 0 } }

DYNAMICALLY CALCULATED ATTRIBUTES

Note: Dynamic attributes have changed in version 2.0.0.

Since version 0.4.0, MQUL can dynamically calculate "virtual attributes", such as the minimum of a list of "real" attributes, and query on these as if they were true attributes of the document.

For example, consider the following document:

$document = {
	one => 1,
	two => 2,
	three => 3
}

The $min and $max "functions" can be used to query on the minimum and maximum of these attributes, respectively:

# true
doc_matches(
	$document,
	{ min => 1 },
	[ min => { '$min' => ['one', 'two', 'three'] } ]
);

# true
doc_matches(
	$document,
	{ max => 3 },
	[ max => { '$max' => ['one', 'two', 'three'] } ]
);

# false
doc_matches(
	$document,
	{ min => { '$gt' => 2 } },
	[ min => { '$min' => ['one', 'two', 'three'] } ]
);

You will notice that we are providing a third parameter to doc_matches(), an array reference that defines the dynamic attributes and how they are calculated.

You can define as many dynamic attributes as you like. They will be calculated in order, so you can define a dynamic attribute, and then build another one from it later on:

doc_matches(
	{ mfive => -5, three => 3 },
	[ mtwo => { '$diff' => ['three', 'mfive'] },
	  two => { '$abs' => 'mtwo' } ]
);

In the above example, mtwo is created with $diff from the three and mfive attributes, yielding a value of -2. Then, the two attribute is created from mtwo by using $abs, thus yielding 2.

Currently, all functions are numerical. They all take a list of attributes (except $abs, which only takes one attribute). The following functions are supported:

$min - returns the minimum of the list

$document = { one => 1, four => 4 }

{ '$min' => ['one', 'four'] }   # min(1, 4) = 1

$max - returns the maximum of the list

$document = { one => 1, four => 4 }

{ '$max' => ['one', 'four'] }   # max(1, 4) = 4

$abs - returns the absolute value of an attribute

$document = { mtwo => -2 }

{ '$abs' => 'mtwo' }	# abs(-2) = 2

$sum - returns the sum of the list

$document = { one => 1, four => 4, mtwo => -2 }

{ '$sum' => ['one', 'four', 'mtwo'] }	# 1 + 4 + (-2) = 3

$diff - returns the difference between the first item in the list and all the rest

$document = { one => 1, four => 4, mtwo => -2 }

{ '$diff' => ['one', 'four', 'mtwo'] }	# 1 - 4 - (-2) = -1

$product - returns the product of all the attributes in the list

$document = { two => 2, three => 3, four => 4 }

{ '$product' => ['two', 'three', 'four'] }	# 2*3*4 = 24

$div - returns the successive division of the list
```
$document = { eight => 8, four => 4, two => 2 }

{ '$div' => ['eight', 'four', 'two'] }	# (8/4)/2 = 1
```
Note that if $div encounters a zero value anywhere after the first item of the list, it will immediately return zero instead of throw an error.

The functions also support the dot notation, so the following will return true:

doc_matches(
	# the document
	{
		numbers => {
			one => 35,
			two => -65,
			three => 100
		},
		array => [50, -50]
	},
	# the query
	{
		'min(numbers)' => -65,
		'sum(array)' => 0
	},
	# dynamic definitions
	[
		'min(numbers)' => { '$min' => ['numbers.one', 'numbers.two', 'numbers.three'] },
		'sum(array)'   => { '$sum' => ['array.0', 'array.1'] }
	]
);

UPDATE STRUCTURES

Update structures are used to modify the attributes of documents. The keys of an update structure are modifiers, and their values are hash-references. These hash-refs have one or more attributes (of the document) as keys, and the actual modifications as the values.

Let's look at a simple example:

$update = { '$inc' => { number => 3 } }

This update structure uses the $inc update modifier, and it tells MQUL to increase the value of the 'number' attribute by three.

The following update modifiers are supported:

$inc

Used to increase the value of attributes by a certain amount. This can also be used to decrease the attribute, by giving it a negative value.
```
$update = { '$inc' => { to_increase => 2, to_decrease => -2 } }
```
This will increase 'to_increase' by two and decrease 'to_decrease' by two.
$set

This modifier is used to change the value of an attribute. This is pretty simple, and you can give an attribute whatever value you want - scalars, data structures, whatever.
```
$update = {
	'$set' => {
		title => 'Freaks and Geaks',
		genre => [qw/comedy drama/],
	},
}
```
Given the following document:
```
$document = {
	title => 'Death Note',
	genre => [qw/anime thriller/],
	imdb_score => 10,
}
```
Using the update structure on it will yield the following revised document:
```
$document = {
	title => 'Freaks and Geaks',
	genre => qw[/comedy drama/],
	imdb_score => 10,
}
```

$unset

This modifier is used to remove an attribute (or attributes) from a document.

$update = { '$unset' => { imdb_score => 1 } }

This will cause the following document:

$document = {
	title => 'Freaks and Geaks',
	genre => qw[/comedy drama/],
	imdb_score => 9.4,
}

To turn into this document:

$document = {
	title => 'Freaks and Geaks',
	genre => qw[/comedy drama/],
}

$rename

This is used to rename an attribute.
```
$update = { '$rename' => { old_name => 'new_name' } }
```
So if a document had an attribute called 'old_name', after the update the attribute will be called 'new_name', but the same value will be retained.
$push

This is used to push a certain value to the end of an attribute that holds an array.
```
$update = { '$push' => { tags => 'romance' } }
```
So, if a document had an attribute called 'tags' with the value ['comedy', 'drama'], after the update 'tags' will be ['comedy', 'drama', 'romance'].
$pushAll

The same as $push, but used to push multiple values at once.
```
$update = { '$pushAll' => { tags => [qw/romance chick_flick/] } }
```
$addToSet

The same as $push, but will only push the value to an array attribute if it's not already in the array.
```
$update = { '$addToSet' => { tags => 'comedy' } }
```
This won't do anything for the following document:
```
$document = {
	title => 'Freaks and Geeks',
	tags => [qw/comedy drama/],
}
```
$addToSet can also take arrays of values, like $pushAll does.
```
$update = { '$addToSet' => { tags => [qw/romance chick_flick/] } }
```
$pop

This modifier will remove the last item in an array attribute.
```
$update = { '$pop' => { tags => 1 } }
```
Note that the value you give to the attribute you're modifying (1 in the above example) doesn't matter, only one item will be removed, but you must give a true value, otherwise nothing will happen:
```
$update = { '$pop' => { tags => 0 } }
```
The above example won't actually pop anything from the 'tags' attribute.
$shift

This modifier will remove the first item in an array attribute. The same note given to $pop above holds true for $shift as well.
$splice

This modifier is used to remove a specific range of indexes from an array attribute.
```
$update = { '$splice' => { tags => [3, 2] } }
```
This will remove two items from the 'tags' array, starting at offset 3 (take a look at Perl's splice() function for more info).
$pull

This is used to remove a specific value from an array attribute.
```
$update = { '$pull' => { tags => 'comedy' } }
```
This will remove 'comedy' from the 'tags' attribute, if it has it.
$pullAll

The same as $pull, but used for pulling multiple values at once.
```
$update = { '$pullAll' => { tags => [qw/comedy drama/] } }
```

NOTABLE DIFFERENCES FROM MONGODB

QUERIES

1. The $nor constraint is not supported (yet).
2. The $elemMatch construct is not supported (yet).
3. The $not meta operator is not supported (yet).
4. The $where construct is not supported (and probably never will be).
5. The direct equality constraint can also compare complex data structures in MQUL. See "THE EQUALITY CONSTRAINT".
6. The $type operator is very different in MQUL. See "THE TYPE CONSTRAINT".

UPDATES

1. The $bit modifier is not supported (yet).
2. The $ positional operator is not supported (and I don't think it will be).
3. The dot notation, for updating sub-attributes, is not supported (yet).

AUTHOR

Ido Perlmuter <ido at ido50 dot net>

LICENSE AND COPYRIGHT

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either version 5.8.1 or any later version. See perlartistic and perlgpl.

The full text of the license can be found in the LICENSE file included with this module.

DISCLAIMER OF WARRANTY

BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

To install MQUL, copy and paste the appropriate command in to your terminal.

cpanm

cpanm MQUL

CPAN shell

perl -MCPAN -e shell
install MQUL

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)