/ 
Perl6-Bible-0.17
River stage zero No dependents
/ Perl6::Bible::S29

Title

[DRAFT] Synopsis 29 - Builtin Functions [DRAFT]

Version

Maintainer:    Rod Adams <rod@rodadams.net>
Date:          12 Mar 2005
Last Modified: 03 Apr 2005

This document attempts to document the list of builtin functions in Perl 6. It assumes familiarity with Perl 5 and prior synopses.

Notes

In Perl 6, all builtin functions belong to a named package. Not all functions are guaranteed to be imported into the global package ::*. In addition, the list of functions imported into ::* will be subject to change with each release of Perl. Authors wishing to "Future Proof" their code should either specifically import the functions they will be using, or always refer to the functions by their full name.

After 6.0.0 comes out, global aliases will not be removed lightly, and will never be removed at all without having gone through a deprecation cycle of at least a year. In any event, you can specify that you want the interface for a particular version of Perl, and that can be emulated by later versions of Perl to the extent that security updates allow.

Where code is given here, it is intended to define semantics, not to dictate implementation.

Type Declarations

The following type declarations are assumed:

Char

The root class of all "character" types, regardless of level.

This is a subtype of Str, limited to a length of 1 at it's highest supported Unicode level.

Subclasses (things that are isa Char):

LanguageChar aka LChar
Grapheme aka Grf
CodePoint aka CdPt
Byte

Yes, Byte is both a string and a number.

MatchTest
type MatchTest ::= Scalar | Junction;

Used to supply a test to match against. Assume ~~ will be used against it.

Function Packages

Math::Basic

abs
multi sub  Perl6::Num::abs (  Num  $x              ) returns Num
multi sub Math::Basic::abs (: Num ?$x = $CALLER::_ ) returns Num

Absolute Value.

exp
multi sub  Perl6::Num::exp (  Num  $exponent             : Num +$base) returns Num
multi sub Math::Basic::exp (: Num ?$exponent = $CALLER::_, Num +$base) returns Num

Performs similar to $base ** $exponent. $base defaults to the constant e.

log
multi sub  Perl6::Num::log (  Num  $x             : Num +$base) returns Num
multi sub Math::Basic::log (: Num ?$x = $CALLER::_, Num +$base) returns Num

Logarithm of base $base, default Natural. Calling with $x == 0 is an error.

log10
&log10<> := &log<>.assuming:base(10);
rand
multi sub Math::Basic::rand (: Num ?$x = 1) returns Num

Psuedo random number between 0 and $x.

sign
multi sub  Perl6::Num::sign (  Num  $x             ) returns Int
multi sub Math::Basic::sign (: Num ?$x = $CALLER::_) returns Int {
  if !defined($x) { return undef };
  if $x < 0       { return -1    };
  if $x > 0       { return  1    };
  if $x == 0      { return  0    };
  undef;
}
srand
multi sub Math::Basic::srand (: Num ?$seed)

Seed the generator rand uses. $seed defaults to some combination of various platform dependent characteristics to yield a non- deterministic seed.

sqrt
multi sub  Perl6::Num::sqrt (  Num  $x             ) returns Num
multi sub Math::Basic::sqrt (: Num ?$x = $CALLER::_) returns Num

$x ** 0.5

Math::Trig

Standard Trig Functions
multi sub Perl6::Num::func (  Num  $x             : +$base) returns Num
multi sub Math::Trig::func (: Num ?$x = $CALLER::_, +$base) returns Num

where func is one of: sin, cos, tan, asin, acos, atan, sec, cosec, cotan, asec, acosec, acotan, sinh, cosh, tanh, asinh, acosh, atanh, sech, cosech, cotanh, asech, acosech, acotanh.

Performs the various trigonmetric functions.

Option $base is used to declare your how you measure your angles. Given the value of an arc representing a single full revolution.

$base  	Result
----   	-------
/:i ^r/	Radians  (2*pi)
/:i ^d/	Degrees  (360)
/:i ^g/	Gradians (400)
Num    	Units of 1 revolution.
atan
multi sub Math::Trig::atan (Num $y, Num $x : Num +$base) returns Num

This second form of atan computes the arctangent of $y/$x, and takes the quadrant into account. Otherwise behaves as other trigonometric functions. Replaces Perl 5 atan2.

pi
multi sub Math::Trig::pi () returns Num

Perl6::Array

delete
multi method Perl6::Array::delete (@array : *@indices) returns List

Sets elements specified by @indices in the invocant to a non-existent state, as if they never had a value. Deleted elements at the end of an Array shorten the length of the Array, unless doing so would violate an is shape() definition.

@indices is interpreted the same way as subscripting is in terms of slices and multidimensionality. See Synopsis 9 for details.

Returns the value(s) previously held in deleted locations.

An unary form is expected. See Perl6::Hash::delete.

exists
multi method Perl6::Array::exists (@array : Int *@indices) returns Bool

True if the specified Array element has been assigned to. This is not the same as being defined.

Supplying a different number of indices than invocant has dimensions is an error.

An unary form is expected. See Perl6::Hash::delete.

pop
&Perl6::Array::pop<Array> := &Perl6::Array::splice<Array>.assuming(:offset(-1) :length(1));

multi sub Perl6::Array::pop () returns Scalar {
  pop @CALLER::_;
}
push
multi sub Perl6::Array::push (@array is rw : *@values) returns Int {
  Perl6::Array::splice(@array, @array.elems, 0, @values);
  @array.elems;
}
shift
&Perl6::Array::shift<Array> := &Perl6::Array::splice<Array>.assuming(:offset(0) :length(1));

multi sub Perl6::Array::shift () returns Scalar {
  Perl6::Array::shift @CALLER::_;
}
splice
multi sub Perl6::Array::splice (       @array is rw 
                                : Int ?$offset = 0,
                                  Int ?$length,
                                      *@values
                               ) returns List is rw

Behaves similar as Perl 5 splice.

If @array is multidimensional, splice operates only on the first dimension, and works with Array References.

unshift
multi sub Perl6::Array::unshift (@array is rw : *@values) returns Int {
  Perl6::Array::splice(@array, 0, 0, @values);
  @array.elems;
}
keys
kv
pairs
values
multi sub Perl6::Array::keys   (@array : MatchTest *@indextests) returns Int|List
multi sub Perl6::Array::kv     (@array : MatchTest *@indextests) returns Int|List
multi sub Perl6::Array::pairs  (@array : MatchTest *@indextests) returns Int|(List of Pair)
multi sub Perl6::Array::values (@array : MatchTest *@indextests) returns Int|List

Iterates the elements of @array, in order.

If @indextests are provided, only elements whose indices match $index ~~ any(@indextests) are iterated.

What is returned at each element of the iteration varies with function. values returns the value of the associated element; kv returns a 2 element list in (index, value) order, pairs a Pair(index, value).

@array is considered single dimensional. If it is in fact multi- dimensional, the values returned will be array references to the sub array.

In Scalar context, they all return the count of elements that would have been iterated.

Perl6::List

grep
multi sub Perl6::Array::grep (@values :      Code *&test  ) returns Lazy
multi sub Perl6::Array::grep (@values,   MatchTest $test  ) returns Lazy
multi sub  Perl6::List::grep (MatchTest $test :   *@values) returns Lazy {
  gather {
    for @values -> $x {
      take $x if $x ~~ $test;
    }
  }
}
join
multi sub Perl6::Array::join (@values,   Str $delimiter) returns Str
multi sub  Perl6::List::join (Str $delimiter : *@values) returns Str {
  my $str = ~@values[0];
  for 1..@values.end {
    $str ~= $delimiter ~ @values[$_];
  }
  $str;
}
&join<> := &join<Str>.assuming:delimiter(' ');
map
multi sub Perl6::Array::map (@values,   Code $expression) returns Lazy 
multi sub  Perl6::List::map (Code $expression : *@values) returns Lazy {
  gather {
    while @values {
      take $expression
         .( splice(@values, 0, $expression.arity) );
    }
  }
}
reduce
multi sub Perl6::Array::reduce (@values : Code *&expression) returns Scalar
multi sub  Perl6::List::reduce (Code $expression : *@values) returns Scalar {
  my $res;
  for @values -> $cur {
       FIRST {$res = $cur; next;}
    $res = &$expression($res, $cur);
  }
  $res;
}
reverse
multi sub Perl6::Hash::reverse (%hash) returns Hash is default {
  my %result;
  for %hash.kv -> $k, $v {
    %result{$v} = $k;
  }
  %result;
}

multi sub Perl6::Array::reverse (   @values) returns Lazy|Str {
multi sub  Perl6::List::reverse (: *@values) returns Lazy|Str {
  given want {
    when List {
      gather {
        1 while take pop @values;
      }
    }
    when Scalar {
      reverse @values ==> join;
    }
  }
}
sort
type KeyExtractor  ::= Code(Any) returns Any;
type Comparator    ::= Code(Any, Any) returns Int;
type SortCriterion ::= KeyExtractor
                     | Comparator
                     | Pair(KeyExtractor, Comparator);

multi sub Perl6::Array::sort(                 @values is rw,
                                             *&by
                             :           Bit +$inplace
                            ) returns Array

multi sub Perl6::Array::sort(                 @values is rw,
                               SortCriterion  @by
                             :           Bit +$inplace
                            ) returns Array

multi sub Perl6::Array::sort(                 @values is rw
                             : SortCriterion +$by = &infix:<cmp>,
                                         Bit +$inplace
                            ) returns Array

multi sub  Perl6::List::sort(  SortCriterion  @by
                             :               *@values
                            ) returns List

multi sub  Perl6::List::sort(: SortCriterion  $by = &infix:<cmp>,
                                             *@values
                            ) returns List

Returns @values sorted, using criteria $by or @by for comparisions. @by differs from $by in that each criteria is applied, in order, until a non-zero (tie) result is achieved.

Criterion can take a few different forms:

Comparator

A closure with arity of 2, which returns negative/zero/positive, signaling the first arguement should be before/tied with/after the second in the final ordering of the List. aka "The Perl 5 way"

KeyExtractor

A closure with arity of 1, which returns the "key" by which to sort. If the closure returns a Num, <=> is used for comparison, otherwise cmp.

Pair(KeyExtractor, Comparator)

A combination of the two methods above, for when one wishs to take advantage of the internal caching of keys that is expected to happen, but wishes to compare them with something other than <=> or cmp.

Any Criterion may recieve either or both of the traits is descending and is insensitive to reverse the order of sort, or the adjust the case sensitivity of cmp as a Comparator.

If all criteria are exhausted when comparing two elements, sort should return them in the same relative order they had in @values.

If $inplace is specified, the array is sorted in place.

See http://www.nntp.perl.org/group/perl.perl6.language/16578 for more details and examples.

zip
multi sub Perl6::Lists::zip (: Array *@lists, Bit +$shortest) returns Lazy {
  gather {
    while $shortest ?? all (@lists) :: any(@lists) {
      for @lists -> @list {
        take shift @list;
      }
    }
  }
}

Perl6::Hash

delete
multi method Perl6::Hash::delete (: *@keys) returns List
multi method Perl6::Hash::delete (   $key ) returns Scalar is default

Deletes the elements specified by $key or $keys from the invocant. returns the value(s) that were associated to those keys.

Unary Form

Implementations should create a suitable macro, or otherwise support the unary form delete %hash{$key} in all it's forms. Below are some example translations. This list is not exhaustive.

delete %hash{$key}                %hash.delete{$key}
delete %hash<key>                 %hash.delete{'key'}
delete %hash<key1>{@keys}         %hash<key1>.delete{@keys}
exists
multi method Perl6::Hash::exists ($key) returns Bool

True if invocant has an element whose key matches $key, false otherwise.

An unary form is expected. See Perl6::Hash::delete

keys
kv
pairs
values
multi sub Perl6::Hash::keys   (%hash : MatchTest *@keytests) returns Int|List
multi sub Perl6::Hash::kv     (%hash : MatchTest *@keytests) returns Int|List
multi sub Perl6::Hash::pairs  (%hash : MatchTest *@keytests) returns Int|(List of Pair)
multi sub Perl6::Hash::values (%hash : MatchTest *@keytests) returns Int|List

Iterates the elements of %hash in no apparent order, but the order will be the same between successive calls to these functions, as long as %hash doesn't change.

If @keytests are provided, only elements whose keys evaluate $key ~~ any(@keytests) as true are iterated.

What is returned at each element of the iteration varies with function. keys only returns the key; values the value; kv returns both as a 2 element list in (key, value) order, pairs a Pair(key, value).

Note that kv %hash returns the same as zip(keys %hash; values %hash)

In Scalar context, they all return the count of elements that would have been iterated.

The lvalue form of keys is not longer supported. Use the .buckets property instead.

Perl6::Str

General notes about strings:

A Str can exist at several Unicode levels at once. Which level you interact with typically depends on what your current lexical context has declared the "working unicode level to be". Default is LChars.

Attempting to use a string at a level higher it can support is handled without warning. The highest supported level is simply mapped char for char to the desired level. However, attempting to stuff something into the string at a higher level that doesn't map to the lower level is an error (for example, attempting to store Kanji in a Byte uplifted to an LChar).

Attempting to use a string at a level lower than what it supports is not allowed.

If a function takes a Str and returns a Str, the returned Str will support the same levels as the input, unless specified otherwise.

chop
multi sub Perl6::Str::chop (  Str  $string is rw                 ) returns Char
multi sub Perl6::Str::chop (: Str *@strings = ($CALLER::_) is rw ) returns Char

Trims the last character from $string, and returns it. Called with a list, it chops each item in turn, and returns the last character chopped.

chomp
multi sub Perl6::Str::chomp (  Str  $string is rw                 ) returns Int
multi sub Perl6::Str::chomp (: Str *@strings = ($CALLER::_) is rw ) returns Int

Related to chop, only removes trailing chars that match /\n/. In either case, it returns the number of chars removed.

Note: Most users should consider setting their I/O handles to autochomp instead of this step.

lc
multi sub Perl6::Str::lc         (  Str  $string              ) returns Str
multi sub Perl6::Str::lc         (: Str ?$string = $CALLER::_ ) returns Str

Returns the input string after converting each character to it's lowercase form, if uppercase.

lcfirst
multi sub Perl6::Str::lcfirst    (  Str  $string              ) returns Str
multi sub Perl6::Str::lcfirst    (: Str ?$string = $CALLER::_ ) returns Str

Like lc, but only affects the first character.

uc
multi sub Perl6::Str::uc         (  Str  $string              ) returns Str
multi sub Perl6::Str::uc         (: Str ?$string = $CALLER::_ ) returns Str

Returns the input string after converting each character to it's uppercase form, if lowercase. This is not a Unicode "titlecase" operation, but a full "uppercase".

ucfirst
multi sub Perl6::Str::ucfirst    (  Str  $string              ) returns Str
multi sub Perl6::Str::ucfirst    (: Str ?$string = $CALLER::_ ) returns Str

Performs a Unicode "titlecase" operation on the first character of the string.

capitalize
multi sub Perl6::Str::capitalize (  Str  $string              ) returns Str
multi sub Perl6::Str::capitalize (: Str ?$string = $CALLER::_ ) returns Str

Has the effect of first doing an lc on the entire string, then performing a s:g/(\w+)/{ucfirst $1}/ on it.

length
index
pack
pos
quotemeta
rindex
split
sprintf
substr
multi sub substr(Str $s, StrPos $start  : StrPos ?$end,     ?$replace)
multi sub substr(Str $s, StrPos $start,   StrLen $length  : ?$replace)
multi sub substr(Str $s, StrLen $offset : StrLen ?$length,  ?$replace)
unpack
vec

Control::Basic

eval
multi sub Control::Basic::eval (: Str $code = $CALLER::_, Str +$lang = 'Perl6')

Execute $code as if it were code written in $lang. 'Perl6' is the only required language, but supporting 'Perl 5' is strongly recommended.

Returns whatever $code returns, or undef on error.

evalfile
multi sub Control::Basic::evalfile (Str $filename : Str +$lang = 'Perl6')

Behaves like, and replaces Perl 5 do EXPR, with optional $lang support.

exit
multi sub Control::Basic::exit (: Int ?$status = 0)

Stops all program execution, and returns $status to the calling environment.

nothing
multi sub Control::Basic::nothing ()

No operation. Literally does nothing.

sleep
multi sub Control::Basic::sleep (: Num ?$for = Inf ) returns Num

Attempt to sleep for up to $for seconds. Implementations are only obligated to support integral seconds, but higher resolutions are preferred.

die
fail

TODO: Research the exception handling system.

Conversions

bless
sub
chr
ord

Question: I think these should be strictly Code Point level activitities, but I'm not sure. They likely need to be renamed, as well.

list
multi sub Conversions::List:list (: *@list) returns List

Forces List Context on it's arguements, and returns them.

scalar
multi sub Conversions::Scalar:scalar ($scalar) returns Scalar

Forces generic Scalar context on it's arguement, and returns it.

0x, 0o, 0b, 0d
multi sub prefix::<0x> (: Str ?$hexstr = $CALLER::_) returns Num
multi sub prefix::<0o> (: Str ?$octstr = $CALLER::_) returns Num
multi sub prefix::<0b> (: Str ?$binstr = $CALLER::_) returns Num
multi sub prefix::<0d> (: Str ?$binstr = $CALLER::_) returns Num

Interprets string as a number, with a default hexadecimal/octal/binary/decimal radix. Any radix mentioned inside the string will be override this operator. Returns undef on failure.

Replaces Perl 5 hex and oct.

Time::Local

gmtime
localtime
time

TODO

study
defined
undef
scalar
want
caller

Obsolete

dbmopen, dbmclose
use DB_File;
dump

With Parrot?

each

See Perl6::Hash::kv or Perl6::Hash::pairs instead.

format, formline, write

See Exgesis 7.

/[msg|sem|shm].*/
use IPC::SysV;
ref

Can be done with $var.meta.name, but you're likely better off performing an isa, or just $var ~~ TYPE.

reset

Was there a good use for this?

prototype
&func.meta.signature;

Pending Apocalypse

The following functions are pending a future Apocalypse/Synopsis/p6l Discussion before progress can be made:

A/S14: Tied Variables

tie tied untie

A/S16: IPC / IO / Signals

-X accept alarm bind binmode chown close closedir connect eof fcntl fileno flock getc getpeername /[get|set][host|net|proto|serv|sock].*/ glob ioctl link listen lstat mkdir open opendir pipe print printf read readdir readline readlink readpipe recv rename rewinddir rmdir seek seekdir select(both) send setsockopt shutdown slurp socket socketpair stat symlink syscall sysopen sysread sysseek syswrite tell telldir truncate umask unlink utime warn

A/S??: OS Interaction

chroot crypt exec getlogin /[get|set][pw|gr].*/ kill setpgrp setpriority system times

A/S17: Threads and Multiprocessing

fork lock wait waitpid

Additions

Is your favorite function, which you spent weeks successfully arguing on perl6-language to get accepted, nowhere on this document? Have no fear. Email rod@rodadams.net with a brief description and a link to the thread on http://www.nntp.perl.org/group/perl.perl6.language, and it'll get listed.

Post errors to perl6-language.