NAME

Tinkerforge::BrickletAnalogOut - Device for output of voltage between 0 and 5V

CONSTANTS

DEVICE_IDENTIFIER

This constant is used to identify a Analog Out Bricklet.

The get_identity() subroutine and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

FUNCTION_SET_VOLTAGE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_VOLTAGE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_MODE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_MODE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_IDENTITY

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTIONS

new()

Creates an object with the unique device ID *uid* and adds it to the IP Connection *ipcon*.

set_voltage()

Sets the voltage in mV. The possible range is 0V to 5V (0-5000). Calling this function will set the mode to 0 (see :func:`SetMode`).

The default value is 0 (with mode 1).

get_voltage()

Returns the voltage as set by :func:`SetVoltage`.

set_mode()

Sets the mode of the analog value. Possible modes:

* 0: Normal Mode (Analog value as set by :func:`SetVoltage` is applied) * 1: 1k Ohm resistor to ground * 2: 100k Ohm resistor to ground * 3: 500k Ohm resistor to ground

Setting the mode to 0 will result in an output voltage of 0. You can jump to a higher output voltage directly by calling :func:`SetVoltage`.

The default mode is 1.

get_mode()

Returns the mode as set by :func:`SetMode`.

get_identity()

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found :ref:`here <device_identifier>`. |device_identifier_constant|