NAME

Tinkerforge::BrickletColor - Device for measuring color (RGB value), illuminance and color temperature

CONSTANTS

DEVICE_IDENTIFIER

This constant is used to identify a Color Bricklet.

The get_identity() subroutine and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

CALLBACK_COLOR

This constant is used with the register_callback() subroutine to specify the CALLBACK_COLOR callback.

CALLBACK_COLOR_REACHED

This constant is used with the register_callback() subroutine to specify the CALLBACK_COLOR_REACHED callback.

CALLBACK_ILLUMINANCE

This constant is used with the register_callback() subroutine to specify the CALLBACK_ILLUMINANCE callback.

CALLBACK_COLOR_TEMPERATURE

This constant is used with the register_callback() subroutine to specify the CALLBACK_COLOR_TEMPERATURE callback.

FUNCTION_GET_COLOR

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_COLOR_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_COLOR_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_COLOR_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_COLOR_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_LIGHT_ON

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_LIGHT_OFF

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_IS_LIGHT_ON

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_CONFIG

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_CONFIG

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_ILLUMINANCE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_COLOR_TEMPERATURE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_ILLUMINANCE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_ILLUMINANCE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_COLOR_TEMPERATURE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_COLOR_TEMPERATURE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_IDENTITY

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTIONS

new()

Creates an object with the unique device ID *uid* and adds it to the IP Connection *ipcon*.

get_color()

Returns the measured color of the sensor. The values have a range of 0 to 65535.

The red (r), green (g), blue (b) and clear (c) colors are measured with four different photodiodes that are responsive at different wavelengths:

.. image:: /Images/Bricklets/bricklet_color_wavelength_chart_600.jpg :scale: 100 % :alt: Chart Responsivity / Wavelength :align: center :target: ../../_images/Bricklets/bricklet_color_wavelength_chart_600.jpg

If you want to get the color periodically, it is recommended to use the callback :func:`Color` and set the period with :func:`SetColorCallbackPeriod`.

set_color_callback_period()

Sets the period in ms with which the :func:`Color` callback is triggered periodically. A value of 0 turns the callback off.

:func:`Color` is only triggered if the color has changed since the last triggering.

The default value is 0.

get_color_callback_period()

Returns the period as set by :func:`SetColorCallbackPeriod`.

set_color_callback_threshold()

Sets the thresholds for the :func:`ColorReached` callback.

The following options are possible:

.. csv-table:: :header: "Option", "Description" :widths: 10, 100

"'x'",    "Callback is turned off"
"'o'",    "Callback is triggered when the temperature is *outside* the min and max values"
"'i'",    "Callback is triggered when the temperature is *inside* the min and max values"
"'<'",    "Callback is triggered when the temperature is smaller than the min value (max is ignored)"
"'>'",    "Callback is triggered when the temperature is greater than the min value (max is ignored)"

The default value is ('x', 0, 0, 0, 0, 0, 0, 0, 0).

get_color_callback_threshold()

Returns the threshold as set by :func:`SetColorCallbackThreshold`.

set_debounce_period()

Sets the period in ms with which the threshold callback

* :func:`ColorReached`

is triggered, if the threshold

* :func:`SetColorCallbackThreshold`

keeps being reached.

The default value is 100.

get_debounce_period()

Returns the debounce period as set by :func:`SetDebouncePeriod`.

light_on()

Turns the LED on.

light_off()

Turns the LED off.

is_light_on()

Returns the state of the LED. Possible values are:

* 0: On * 1: Off

set_config()

Sets the configuration of the sensor. Gain and integration time can be configured in this way.

For configuring the gain:

* 0: 1x Gain * 1: 4x Gain * 2: 16x Gain * 3: 60x Gain

For configuring the integration time:

* 0: 2.4ms * 1: 24ms * 2: 101ms * 3: 154ms * 4: 700ms

Increasing the gain enables the sensor to detect a color from a higher distance.

The integration time provides a trade-off between conversion time and accuracy. With a longer integration time the values read will be more accurate but it will take longer time to get the conversion results.

The default values are 60x gain and 154ms integration time.

get_config()

Returns the configuration as set by :func:`SetConfig`.

get_illuminance()

Returns the illuminance affected by the gain and integration time as set by :func:`SetConfig`. To get the illuminance in Lux apply this formula::

lux = illuminance * 700 / gain / integration_time

To get a correct illuminance measurement make sure that the color values themself are not saturated. The color value (R, G or B) is saturated if it is equal to the maximum value of 65535. In that case you have to reduce the gain, see :func:`SetConfig`.

get_color_temperature()

Returns the color temperature in Kelvin.

To get a correct color temperature measurement make sure that the color values themself are not saturated. The color value (R, G or B) is saturated if it is equal to the maximum value of 65535. In that case you have to reduce the gain, see :func:`SetConfig`.

set_illuminance_callback_period()

Sets the period in ms with which the :func:`Illuminance` callback is triggered periodically. A value of 0 turns the callback off.

:func:`Illuminance` is only triggered if the illuminance has changed since the last triggering.

The default value is 0.

get_illuminance_callback_period()

Returns the period as set by :func:`SetIlluminanceCallbackPeriod`.

set_color_temperature_callback_period()

Sets the period in ms with which the :func:`ColorTemperature` callback is triggered periodically. A value of 0 turns the callback off.

:func:`ColorTemperature` is only triggered if the color temperature has changed since the last triggering.

The default value is 0.

get_color_temperature_callback_period()

Returns the period as set by :func:`SetColorTemperatureCallbackPeriod`.

get_identity()

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found :ref:`here <device_identifier>`. |device_identifier_constant|